<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of low-cost biomass-based adsorbents for postcombustion CO2 capture
2
Development of Low-Cost Current Controlled Stimulator for Paraplegics
3
Development of low-cost feeds for fattening of native catfish, Clarias macrocephalus
4
Development of low-cost metal oxide pH electrodes based on the polymeric precursor method Original Research Article
5
Development of low-diffusion flux-splitting methods for dense gas–solid flows
6
Development of low-mass drift chambers for the HADES spectrometer
7
Development of low-mass drift chambers for the HADES spectrometer
8
Development of low-noise centrifugal fans for a refrigerator using inclined S-shaped trailing edge
9
Development of low-noise double-sided silicon strip detector for cosmic soft gamma-ray Compton Camera
10
Development of low-noise double-sided silicon strip detector for cosmic soft gamma-ray Compton Camera
11
Development of low-noise high value chromium silicide resistors for cryogenic detector applications Original Research Article
12
Development of low-pH cementitious materials based on CAC for HLW repositories: Long-term hydration and resistance against groundwater aggression
13
Development of low-pH cementitious materials for HLRW repositories: Resistance against ground waters aggression
14
Development of low-pressure high-current plasma cathode electron gun and use of associated techniques
15
Development of low-pressure vapour-phase epitaxial GaAs for medical imaging
16
Development of low-pressure vapour-phase epitaxial GaAs for medical imaging
17
Development of Low-Serum Culture Media for the in Vitro Cultivation of Theileria annulata S15 Cell Line
18
Development of low-temperature jumpwise deformation of metals and possibilities of its elimination
19
Development of LSCF–GDC composite cathodes for low-temperature solid oxide fuel cells with thin film GDC electrolyte
20
Development of LSM-based cathodes for solid oxide fuel cells based on YSZ films
21
Development of luminescent Sm(III) chelates containing hexadentate to nonadentate ligands: synthesis, photophysical properties and coupling to biomolecules
22
Development of lupic anticoagulant during combination therapy in a patient with chronic hepatitis C
23
Development of lysosomal storage in mice with targeted disruption of the β-galactosidase gene: a model of human GM1-gangliosidosis
24
Development of lytic Lactococcus lactis bacteriophages in a Cheddar cheese plant
25
Development of machine learning strategy for acquiring on-line machining skills during turning process
26
Development of macro- and micromixing in confined flows of reactive fluids
27
Development of macrofaunal communities on dredged material used for mudflat enhancement: a comparison of three beneficial use schemes after one year
28
Development of macromolecular prodrug for rheumatoid arthritis
29
Development of Macrophage Anticryptococcal Activityin VitroIs Dependent on Endogenous M-CSF
30
Development of macropores in calcium carbonate body using novel carbonation method of calcium hydroxide/sodium chloride composite
31
Development of macroporous calcium phosphate scaffold processed via microwave rapid drying
32
Development of macroporous nanocomposite scaffolds of gelatin/bioactive glass prepared through layer solvent casting combined with lamination technique for bone tissue engineering
33
Development of Macular Hole and Macular Retinochii in Eye with Myopic Choroidal Neovacularization Original Reearch Article
34
Development of Magnetic Capture Hybridization and Quantitative Polymerase Chain Reaction for Hepatitis B Virus Covalently Closed Circular DNA
35
Development of Magnetic Gears: A Review
36
Development of magnetic luminescent core/shell nanocomplex particles with fluorescence using Rhodamine 6G
37
Development of magnetic micro-solid phase extraction for analysis of phthalate esters in packaged food
38
Development of magnetic molecularly imprinted polymers based on carbon nanotubes – Application for trace analysis of pyrethroids in fruit matrices
39
Development of magnetic multiwalled carbon nanotubes combined with near-infrared radiation-assisted desorption for the determination of tissue distribution of doxorubicin liposome injects in rats
40
Development of Magnetic Solvent Bar LiquidPhase Microextraction Followed by Gas Chromatography for the Quantitative Determination of Phthalate Esters in Environmental Water Samples
41
Development of magnetic split-flow thin fractionation for continuous particle separation Original Research Article
42
Development of magnetically separable polyaniline nanofibers for enzyme immobilization and recovery
43
Development of magnetoresistive shielded heads simulation techniques using conformal mapping
44
Development of Magnetorheological Resistive Exercise Device for Rowing Machine
45
Development of Main Success Factors in Technology Transfer: An Empirical Study of Iranian Oil Industry
46
Development of maintainability index for mechanical systems
47
Development of Maintenance Treatment Centers in Comprehensive Rehabilitation Services Clinics for Drug Abuse Based on Lifestyle Modification
48
Development of maintenance-free dry calcium (MFDC) lead-acid battery for automotive use
49
Development of maize starch with a slow digestion property using maltogenic α-amylase
50
Development of Malay Version of Vertigo Symptom Scale (MVVSS) for Clinical Use
51
Development of Male Reproductive Organs in an Insertion Mutant TPD1 of Tobacco Characterized by Extended Flowering
52
Development of mammalian cell-enclosing subsieve-size agarose capsules (<100 μm) for cell therapy
53
Development of Mammalian Serum Albumin Affinity Purification Media by Peptide Phage Display
54
Development of mammary glands of fat sheep submitted to restricted feeding during late pregnancy
55
DEVELOPMENT OF MANAGEMENT MODELS FOR SUSTAINABLE USE OF COASTAL AQUIFERS
56
DEVELOPMENT OF MANAGEMENT MODELS FOR SUSTAINABLE USE OF COASTAL AQUIFERS
57
Development of Management Strategies for the Urban Environment with SWOT Approach: A Case Study in Iran
58
Development of Management Strategies for the Urban Environment with SWOT Approach: A Case Study in Iran
59
Development of Managerial Key Performance Indicators for A Hospital Pharmacy Digital Dashboard
60
Development of manipulatory skills and the deployment of attention
61
Development of manufacturing method for NITE-porous SiC ceramics using decarburization process
62
Development of manufacturing processes for the ITER helium-cooled pebble bed blanket test module
63
Development of marginal emission factors for N losses from agricultural soils with the DNDC–CAPRI meta-model
64
Development of marine water quality criteria for the USA
65
Development of markers of prostate cancer metastasis: Review and perspective
66
Development of Mass Spectrometric Method for Analysis of Cyclic Nitramine Explosives DTIW and HNIW
67
Development of Master Chamber Software for Data Acquisition of Ionization Chamber for Indus 2 RRCAT
68
Development of master sintering curve for field-assisted sintering of HfB2–20SiC
69
Development of material evaluation method by using a pulsed neutron transmission with pixel type detectors
70
Development of material evaluation method by using a pulsed neutron transmission with pixel type detectors
71
Development of materials and fabrication of porous and pebble bed beryllium multipliers
72
Development of Materials Are Based on Character Values to Improve Intensive Reading Skill Students for Class III in Elementary School
73
DEVELOPMENT OF MATERIALS CONNECTION CENTRE SEMINAR I: A REPORT Pak-US (HEC and NAS) Joint S&T Cooperation Programme
74
Development of materials for mini DMFC working at room temperature for portable applications
75
Development of Mathematical Methods of DFT by Using the Physical Chemistry Parameters of Quinolines C26H23ClN4 and C26H23FN4
76
Development of Mathematical Model for Control Wear in Backup Roll for Hot Strip Mill Original Research Article
77
Development of Mathematical Model for Controlling Drilling Parameters with Screw Downhole Motor
78
Development of mathematical model for cooling the fish with ice Original Research Article
79
Development of Mathematical Model for Forecasting the Production Rate
80
Development of mathematical model for optimization of sodium leak collection tray Original Research Article
81
Development of mathematical model for simulating moisture content during the re-wetting of brown rice stored in film packaging
82
Development of Mathematical Model on Preparation of Functionally Graded Material by Co-sedimentation
83
Development of mathematical model to describe the acidification occurring during the ripening of dry fermented sausage
84
Development of mathematical models for the container road transportation in Korean trucking industries
85
Development of mathematical models to predict dry matter intake in feedlot Santa Ines rams
86
Development of Mathematics Achievement Test for Third Grade Students at Elementary School in Indonesia
87
Development of Mathematics, 1900–1950.Edited by Jean-Paul Pier.
88
Development of matrix type transdermal patches of lercanidipine hydrochloride: physicochemical and in-vitro characterization
89
Development of matrix-assisted pulsed laser evaporation (MAPLE) for deposition of disperse films of carbon nanoparticles and gold/nanoparticle composite films
90
Development of mats composed by TiO2 and carbon dual electrospun nanofibers: A possible anode material in microbial fuel cells
91
Development of mature oil fields — A review
92
Development of MCP-based photon diagnostics at the TESLA Test Facility at DESY
93
Development of MCP-based photon diagnostics at the TESLA Test Facility at DESY
94
Development of MCTS technique for 3-PM liquid scintillation counting
95
DEVELOPMENT OF MDR TB IN SHORT DURATION IN A PATIENT RECEIVING TREATMENT FOR SIMPLE TB: A CASE REPORT
96
Development of meaning making: A dynamic systems approach
97
Development of measurement method of particle size distribution by anisokinetic sampling using two sampling probes of different diameter
98
DEVELOPMENT OF MEASUREMENT MODELS FOR GLOBALIZATION, CONSUMPTION PATTERNS AND CULTURE A Case Study of Three Big Cities of Punjab, Pakistan
99
Development of measurement system for powder flowability based on vibrating capillary method
100
Development of measurement technique for surface waves on high-speed liquid lithium jet for IFMIF target
101
Development of measurement techniques for determination main and hazardous components in biogas utilised for energy purposes
102
Development of measurement technology for surface heat fluxes and temperatures
103
Development of measures of online privacy concern and protection for use on the Internet
104
Development of measures to assess dimensions of IS operation transactions
105
Development of measures to estimate truncation error in fault tree analysis
106
Development of measures to estimate truncation error in fault tree analysis
107
Development of measuring magnetic Compton profiles by grazing incidence geometry Original Research Article
108
Development of measuring system for radial non-repetitive run-out (NRRO) and perception about present state of angular contact ball bearing for machine tools
109
Development of mechanical cryocoolers for Astro-H/SXS Original Research Article
110
Development of mechanical cryocoolers for the Japanese IR space telescope SPICA Original Research Article
111
Development of Mechanical Design of The Amphibious Robot
112
Development of Mechanical Heart Devices
113
Development of Mechanical Water Level Controller
114
DEVELOPMENT OF MECHANISMS TO REGULATE LAND USE DIVERSIFICATION
115
Development of mechanistic–empirical design method for an asphalt pavement rutting model using APT
116
Development of mechanochemical diamond stone containing BaSO4 abrasive
117
Development of mechanoluminescence technique for impact studies
118
Development of Media and Automated Liquid Fermentation Methods to Produce Desiccation-Tolerant Propagules ofTrichoderma harzianum
119
Development of medical decision support system for leukemia management
120
Development of Medical Etiquette from New Strategies by Art in Education: A Case Study during and before COVID-19
121
Development of medical teacher: A prospective for challenges in India
122
Development of Medium Volatility Compounds in Manchego-type Cheese as Affected by Salt Content and Salting Method
123
Development of MEG sleep patterns and magnetic auditory evoked responses during early infancy
124
Development of Meishan and Yorkshire littermate conceptuses in either a Meishan or Yorkshire uterine environment to day 90 of gestation and to term
125
Development of melamine certified reference material in milk using two different isotope dilution mass spectrometry techniques
126
Development of Melampsora ciliata rust on nursery-grown poplars in north-western Himalayas
127
DEVELOPMENT OF MELOXICAM FORMULATIONS UTILIZING TERNARY COMPLEXATION FOR SOLUBILITY ENHANCEMENT
128
Development of melt refining decontamination technology for low level radioactive metal waste contaminated with uranium Original Research Article
129
Development of melt-spun Ni–Nb–Zr–Co amorphous alloy for high-performance hydrogen separating membrane
130
Development of membrane based technology for the separation of coal from organic solvent Original Research Article
131
Development of Membrane Bioreactor to Membrane Electro-bioreactor for Advanced Treatment of Wastewater
132
Development of membrane controllers for mobile robots
133
Development of Membrane Electrode for the Selective determination of Bromazepam in Tablets and Plasma
134
Development of membrane electrodes for the selective determination of hyoscine butylbromide
135
Development of Membrane Electrodes for the Specific Determination of Tetryzoline Hydrochloride in Presence of its Degradation Product in Pharmaceutical Formulations and Biological Fluids
136
Development of membrane extraction with a sorbent interface–micro gas chromatography system for field analysis
137
Development of membrane inlet mass spectrometry for examination of fermentation processes
138
Development of membrane reformer system for highly efficient hydrogen production from natural gas
139
Development of membrane systems based on conducting polymers
140
Development of membrane testing protocols for characterisation of RO and NF membranes Original Research Article
141
Development of membrane-based tests for the detection of urinary antigens and antibodies in human toxoplasmosis: preliminary studies in Ghanaian patients
142
Development of membranes for the cultivation of kidney epithelial cells
143
Development of memory trace as reflected by the effect of deviant-stimulus probability on MMN
144
Development of mental health dysfunction in childhood epilepsy
145
Development of Mental Health Problems and Overweight Between Ages 4 and 11 Years: A Population-Based Longitudinal Study of Australian Children
146
Development of mental health services in Tanzania: A reappraisal for the future
147
Development of mesophase pitch derived high thermal conductivity graphite foam using a template method Original Research Article
148
Development of mesopores during activation of poly(vinylidene fluoride)-based carbon Original Research Article
149
Development of mesoporosity during phosphoric acid activation of wood in steam atmosphere
150
Development of mesoporous TiO2 microspheres with high specific surface area for selective enrichment of phosphopeptides by mass spectrometric analysis
151
Development of mesoscopic polymer gripper system guided by precision design axioms
152
Development of mesoscopic textures in transverse cross-section of mesophase pitch-based carbon fibers Original Research Article
153
Development of Metacognition in Gifted Children: Directions for Future Research
154
Development of metakaolin–fly ash based geopolymers for fire resistance applications
155
Development of metal borohydrides for hydrogen storage Original Research Article
156
Development of metal cation compound-loaded S-doped TiO2 photocatalysts having a rutile phase under visible light Original Research Article
157
Development of metal complex imprinted solid-phase microextraction fiber for 2,2′-dipyridine recognition in aqueous medium
158
Development of metal cutting process accompanied by a localized compressive hydrostatic stress field formation: Examination by molecular dynamics simulation
159
Development of metal nanoparticles supported materials as efficient catalysts for reductive amination reactions using high-throughput experimentation
160
Development of metal oxide nanoparticles by soft chemical method
161
Development of metal sulfide-poly (3-octylthiophene) composite LB multilayers
162
Development of metal vapor vacuum arc ion source in Thailand
163
Development of metallic closed cellular materials containing polymers
164
Development of metallic glass loaded polymer paste
165
Development of metallic glasses for bipolar plate application
166
Development of metamodels for predicting aerosol dispersion in ventilated spaces
167
Development of metamorphosis assay using Silurana tropicalis for the detection of thyroid system-disrupting chemicals
168
Development of Meteorus pulchricornis and regulation of its noctuid host, Pseudaletia separata
169
Development of methane emission from lambs fed milk replacer and cream for a prolonged period
170
Development of methanol sensor using a shear horizontal surface acoustic wave device for a direct methanol fuel cell
171
Development of methemoglobin-based biological dosimetry in gamma–irradiated mice
172
Development of Method for Estimating Diplotype Associations with Linear or Binomial Outcomes
173
Development of method for quantitative determination of water arsenic by field test kit
174
Development of method for the speciation of inorganic iron in wine samples Original Research Article
175
Development of methodologies to determine aluminum, cadmium, chromium and lead in drinking water by ET AAS using permanent modifiers
176
Development of methodologies to improve the assessment of reagent behaviour in flotation with particular reference to collectors and depressants
177
Development of methodology and virtual system for optimised simulation of road design data
178
Development of methods for assessing the effectiveness compensation of wage
179
Development of Methods for Calculation of Deuteron-Lithium and Neutron-Lithium Cross Sections for Energies up to 50 MeV
180
Development of methods for designing structural elements made of structurally heterogeneous materials by developing physicomechanical models
181
Development of methods for determining demand-limiting setpoint trajectories in buildings using short-term measurements
182
Development of methods for evaluating hydrogen compatibility and suitability
183
Development of Methods for Evaluating Toxicity to Freshwater Ecosystems
184
Development of methods for mapping global snow cover using moderate resolution imaging spectroradiometer data
185
Development of methods for on-line measurements of chemical conditions in compacted bentonite
186
Development of Methods for Preventing Internal Corrosion of Pipelines in the Heat-Supply System of OAO Rostovenergo
187
Development of Methods for Preventing Internal Corrosion of Pipelines in the Heat-Supply System of OAO Rostovenergo
188
Development of methods for quantitative characterization of network morphology in pharmaceutical hydrogels
189
Development of methods for the quantification of microstructural features in α + β-processed α/β titanium alloys
190
Development of methods of growing carbon nanofibers on silica glass fiber supports
191
Development of Methods to Assess the Effects of Xenobiotics in Outdoor Artificial Streams
192
Development of methods to collect and analyze gasoline range (C5–C12) hydrocarbons from seabed sediments as indicators of subsurface hydrocarbon generation and entrapment
193
Development of Methods to Improve Stability of Underground Structures Operation
194
Development of metrics based on fish body size and species traits to assess European coldwater streams
195
Development of MFC using sulphonated polyether ether ketone (SPEEK) membrane for electricity generation from waste water
196
Development of Mg/Cu nanocomposites using microwave assisted rapid sintering
197
Development of Mg–6.0%Zn–1.0%Y–0.6%Ce–0.6%Zr magnesium alloy and its microstructural evolution during processing
198
Development of MgAl2O4 spinel coating on graphite surface to improve its water-wettability and oxidation resistance
199
Development of Mg-oxide–Ni hydrogen-storage alloys by reactive mechanical grinding
200
Development of Mg–Sc–Mn alloys
201
Development of Mg–Sc–Mn alloys
202
Development of MHD solver based on an adaptive mesh refinement technique
203
Development of micro assembly processes for further miniaturization in electronics production
204
Development of micro co-axial diamond wheel-tool array using a hybrid process of electrochemical co-deposition and RWEDM technique
205
Development of micro direct methanol fuel cells for high power applications
206
Development of micro gas actuator for analyzing gas mixture
207
Development of micro hydrogen gas sensor with SnO2–Ag2O–PtOx composite using MEMS process
208
DEVELOPMENT OF MICRO IRRIGATION DESIGN SOFTWARE (MIDS) TO OPTIMIZE TOTAL PROJECT COST AND HYDRAULIC PARAMETERS
209
Development of micro milling tool made of single crystalline diamond for ceramic cutting
210
Development of micro pixel chamber
211
Development of micro pixel chamber
212
Development of micro polishing system using a magnetostrictive vibrating polisher
213
Development of micro power generators – A review
214
Development of micro X-ray fluorescence spectrometer with multi excitation sources
215
Development of microbeam irradiation system for radiobiology
216
Development of microbeam irradiation system for radiobiology
217
Development of microbial community structure and actvity in a high-rate anaerobic bioreactor at 18 °C
218
Development of microbial fuel cell for wastewater treatment and electricity generation using domestic wastes
219
Development of microbial properties and enzyme activities in copper mine wasteland during natural restoration
220
Development of microbial sensing membranes Original Research Article
221
Development of microchannel methanol steam reformer
222
Development of micro-channel plates on a basis of aluminum oxide
223
Development of micro-channel plates on a basis of aluminum oxide
224
Development of microcrystalline silicon thin films with high deposition rate (over 10 nm/s) using VHF hollow electrode enhanced glow plasma
225
Development of micro-diamond tools through electroless composite plating and investigation into micro-machining characteristics
226
Development of micro-EDM-center with rapidly sharpened electrode
227
Development of Microemulsion for Solubility Enhancement of Clopidogrel
228
Development of microextraction by packed sorbent for toxicological analysis of tricyclic antidepressant drugs in human oral fluid
229
Development of microfine cement grouts by pulverizing ordinary cements
230
Development of micro-fluidic nitrate-selective sensor based on doped-polypyrrole nanowires
231
Development of Microfluidic Platforms: Human Uterine Cervix-on-a-Chip
232
Development of micro-gap wire chamber
233
Development of micro-gap wire chamber
234
Development of micro-machining techniques for air-assisted liquid atomization
235
Development of micromorph tandem solar cells on flexible low-cost plastic substrates
236
Development of micromorph tandem solar cells on foil deposited by VHF-PECVD
237
Development of micropatterned surfaces of poly(butylene succinate) by micromolding for guided tissue engineering
238
Development of micro-piercing system with punch-damage monitoring function
239
Development of microplate-based photoelectrochemical DNA biosensor array for high throughput detection of DNA damage
240
Development of Microplate-radioluminography for 32P
241
Development of microporosity in carbons derived from alkali digested coal Original Research Article
242
Development of microporous carbon xerogels by controlling synthesis conditions
243
Development of microporous ceramic membranes in the system TiO2/ZrO2
244
DEVELOPMENT OF MICROPROPAGATION PROTOCOL FOR MEDICINALLY IMPORTANT PERIPLOCA HYDASPIDIS
245
Development of microreactors made of vertically aligned carbon nanotube films
246
Development of Microsatellite Markers for the Nipa Palm Hispid Beetle, Octodonta nipae (Maulik)
247
Development of microsatellite markers in sesame (Sesamum indicum L.)
248
Development of micro-scale hollow fiber ultrafiltration membranes
249
Development of microspheres for biomedical applications: a review
250
Development of microsporidia-infected Muscidifurax raptor (Hymenoptera: Pteromalidae) at different temperatures
251
Development of microstretching device to evaluate cell membrane strain field around sensing point of mechanical stimuli
252
Development of microstretching device to evaluate cell membrane strain field around sensing point of mechanical stimuli
253
Development of micro-strip gas chambers for high rate operation
254
Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 358 °C
255
Development of microstructure and properties during the multiple extrusion and consolidation of Al–4Mg–1Zr
256
Development of microstructure and texture during high temperature equal channel angular extrusion of aluminium
257
Development of microstructure and texture during recrystallization of a Cu–Al single crystal with (1 0 0)[0 1 1] orientation
258
Development of microstructure and texture in Copper during warm accumulative roll bonding
259
Development of microstructure and texture in extruded NiAl
260
Development of microstructure and texture in extruded NiAl
261
Development of microstructure and texture of medium carbon steel during heavy warm deformation Original Research Article
262
Development of microstructure CO sensor based on hierarchically porous ZnO nanosheet thin films
263
Development of microstructure during creep of polycrystalline mullite and a nanocomposite mullite/5 vol.% SiC
264
Development of microstructure in hot isostatically pressed MgO·Al2O3 spinel
265
Development of microstructure in hot isostatically pressed MgO·Al2O3 spinel
266
Development of Microstructure in Silicon-Aluminum-Bronze
267
Development of microstructure in spray formed alloys
268
Development of microstructure In/Pd-doped SnO2 sensor for low-level CO detection
269
Development of microstructure of fired Ecuadorean clay
270
Development of microstructure of fired Ecuadorean clay
271
Development of microstructure sensor based on hierarchically 2-fold ZnO nanorod arrays on hydrotalcite-like ZnAlCO3 nanosheets
272
Development of microstructured zeolite films as highly accessible catalytic coatings for microreactors
273
Development of microstructures and texture during cold rolling in AA 7055 aluminum alloy
274
Development of microstructures in laser surface remelting of DD2 single crystal Original Research Article
275
Development of micro-thermophotovoltaic power generator with heat recuperation
276
Development of microwave assisted oxidative desulfurization of petroleum oils: A review
277
Development of microwave assisted zeolite–water adsorption heat pump
278
Development of microwave foaming method for phenolic insulation foams
279
Development of microwave gas sensors
280
Development of microwave induced hydrodesulfurization of petroleum streams: A review
281
Development of microwave kinetic inductance detectors and their readout system for LiteBIRD
282
Development of microwave kinetic inductance detectors and their readout system for LiteBIRD
283
Development of microwave-assisted acid hydrolysis of proteins using a commercial microwave reactor and its combination with LC–MS for protein full-sequence analysis
284
Development of microwave-assisted extraction followed by headspace single-drop microextraction for fast determination of paeonol in traditional Chinese medicines
285
Development of microwave-assisted extraction followed by headspace solid-phase microextraction and gas chromatography–mass spectrometry for quantification of camphor and borneol in Flos Chrysanthemi Indici Original Research Article
286
Development of mid-wavelength and long-wavelength megapixel portable QWIP imaging cameras
287
Development of migmatites and the role of viscous segregation in high-T metamorphic complexes: Example from the Ryoke Metamorphic Complex, Mikawa Plateau, Central Japan
288
Development of migration models for macroinvertebrates in the Zwalm river basin (Flanders, Belgium) as tools for restoration management
289
Development of migration models for macroinvertebrates in the Zwalm river basin (Flanders, Belgium) as tools for restoration management
290
Development of migratory orientation in pied flycatchers in different magnetic inclinations
291
Development of Mild Aortic Valve Stenosis in a Rabbit Model of Hypertension Original Research Article
292
Development of millimeter wave integrated circulator based on barium ferrite
293
Development of miniature all-solid-state potentiometric sensing system
294
Development of miniaturized multi-channel high-performance liquid chromatography for high-throughput analysis
295
Development of miniaturized pH biosensors based on electrosynthesized polymer films Original Research Article
296
Development of miniaturized sample preparation with fibrous extraction media
297
Development of mini-cyclones as the size-selective inlet of miniature particle detectors
298
Development of Mini-Gypsum Blocks for Soil Moisture Measurement and their Calibration to Compensate for Temperature
299
Development of minimal basic data set to report COVID-19
300
Development of minimally differentiated acute myeloblastic leukemia with novel isochromosome 18p and antecedent aplastic anemia
301
Development of Minimum Data Set for Electronic Documentation of Progress Note in the General Intensive Care Unit
302
Development of MITC isotropic triangular shell finite elements
303
Development of mitochondria-targeted derivatives of resveratrol
304
Development of MITSuME—Multicolor imaging telescopes for survey and monstrous explosions
305
Development of mixed conducting dense nickel/Ca-doped lanthanum zirconate cermet for gas separation application
306
Development of MnCoO coating with new aluminizing process for planar SOFC stacks
307
Development of MnO2 Incorporated Ni-P Electrode for Ethanol Sensing
308
Development of Mobile Educational Game of Economics
309
Development of model for barrier and optical properties of tapioca starch based edible films
310
Development of model-based computer-aided engine control systems
311
Development of model-based computer-aided engine control systems
312
Development of modelling tools for thermo-hydraulic analyses and design of JT-60SA TF coils
313
Development of models correlating vibration excitation forces to dynamic characteristics of two-phase flow in a tube bundle
314
Development of models for analyzing the load-following performance of microturbines and fuel cells
315
Development of Models for Crash Prediction and Collision Estimation- A Case Study for Hyderabad City
316
Development of models for predicting biological age (BA) with physical, biochemical, and hormonal parameters
317
Development of models for predicting carbon mineralization and associated phytotoxicity in compost-amended soil
318
DEVELOPMENT OF MODELS FOR PREDICTING SPEED ON HORIZONTAL CURVES FOR TWO-LANE RURAL HIGHWAYS
319
Development of models for prediction of solubility for HFC working fluids in pentaerythritol ester compressor oils
320
Development of Models for the Motivating and Demotivating Factors to Learn English among Iranian Azerbaijani and Kurdish EFL Learners
321
Development of modern benthic ecosystems in eutrophic coastal oceans: The foraminiferal record over the last 200 years, Osaka Bay, Japan
322
Development of modified Geometric Brownian Motion models by using stock price data and basic statistics Original Research Article
323
Development of modified piping evaluation diagram for leak-before-break application to Korean next generation reactor
324
Development of modified piping evaluation diagram for leak-before-break application to Korean next generation reactor
325
Development of modified piping evaluation diagram for leak-before-break application to Korean next generation reactor Original Research Article
326
Development of modified rational buyer auction for procurement of ancillary services utilizing participation matrix
327
Development of modified SPH approach for modeling of high-velocity impact
328
Development of modular helium-cooled divertor for DEMO based on the multi-jet impingement (HEMJ) concept: Experimental validation of thermal performance
329
Development of Modular Ozone Sensor System for application in practical use
330
Development of Modulation Strategy for Two-Phase AC–AC Matrix Converters
331
Development of Molecular Beacon method to detect of JAK2 V617F mutation
332
Development of molecular conductors derived from metal dithiolene complexes
333
Development of Molecular Genetics
334
Development of molecular imprinted nanosensor for determination of tobramycin in pharmaceuticals and foods
335
Development of molecular orientation and stress in biaxially deformed polymers. I. Affine deformation in a solid state
336
Development of molecular-based methods for determination of high histamine producing bacteria in fish
337
Development of molecularly imprinted co-polymeric devices for controlled delivery of flufenamic acid using supercritical fluid technology
338
Development of molecularly imprinted electrochemical sensor with titanium oxide and gold nanomaterials enhanced technique for determination of 4-nonylphenol
339
Development of molecularly imprinted phase for the selective retention of stilbene-type estrogenic compounds
340
Development of molecularly imprinted phase for the selective retention of stilbene-type estrogenic compounds Original Research Article
341
Development of molecularly imprinted-solid phase extraction combined with dispersive liquid–liquid microextraction for selective extraction and preconcentration of triazine herbicides from aqueous samples
342
Development of molybdenum–gold proximity bilayers as transition edge sensors for the SPEED camera
343
Development of molybdenum–gold proximity bilayers as transition edge sensors for the SPEED camera
344
Development of monaural and binaural behind-the-ear cartilage conduction hearing aids
345
Development of monkey C-reactive protein (CRP) assay methods
346
Development of monkey C-reactive protein (CRP) assay methods
347
Development of monoclonal antibodies against axenic amastigotes of Leishmania infantum strain in Iran: implication for diagnosis of Kala-azar
348
Development of monoclonal antibodies and a competitive ELISA detection method for glycinin, an allergen in soybean
349
Development of monoclonal antibodies to detect bovine FOXP3 in PBMCs exposed to a staphylococcal superantigen
350
Development of monoclonal antibodies to detect bovine FOXP3 in PBMCs exposed to a staphylococcal superantigen
351
Development of monoclonal antibodies to erythroid progenitors in feline bone marrow1
352
Development of monoclonal antibodies to erythroid progenitors in feline bone marrow1
353
Development of monoclonal antibodies to rohu [Labeo rohita] immunoglobulins for use in immunoassays
354
Development of monoclonal antibody based sandwich ELISA for the rapid detection of pathogenic Vibrio parahaemolyticus in seafood
355
Development of monoclonal antibody-based competitive immunoassays for the detection of picoxystrobin in cereal and oilseed flours
356
Development of monoenergetic neutron calibration fields between 8 keV and 15 MeV
357
Development of monoenergetic neutron calibration fields between 8 keV and 15 MeV
358
Development of monolithic active pixel detector in SOI technology
359
Development of monolithic active pixel detector in SOI technology
360
Development of monolithic active pixel sensors for charged particle tracking
361
Development of monolithic active pixel sensors for charged particle tracking
362
Development of monolithic eco-composites from carbonized blocks of solid iron bamboo (Dendrocalamus strictus) by impregnation with furfuryl alcohol
363
Development of Monte Carlo automatic modeling functions of MCAM for TRIPOLI-ITER application
364
Development of Monte Carlo automatic modeling functions of MCAM for TRIPOLI-ITER application
365
Development of Monte-Carlo simulations for nano-patterning surfaces associated with MM-EPES analysis: Application to different Si(111) nanoporous surfaces
366
Development of Morinda citrifolia citrus-flavoured drinks using Response Surface Methodology (RSM)
367
Development of morphological dependent chemically deposited nanocrystalline ZnO films for liquefied petroleum gas (LPG) sensor
368
Development of morphology in suspension polymerisation of vinyl chloride monomer
369
Development of morphology in suspension polymerisation of vinyl chloride monomer
370
Development of MOS CCDs for the next generation of X-ray observatories
371
Development of MOS CCDs for the next generation of X-ray observatories
372
Development of Motavizumab, an Ultra-potent Antibody for the Prevention of Respiratory Syncytial Virus Infection in the Upper and Lower Respiratory Tract
373
Development of motor coordination and cerebellar structure in male and female rat neonates exposed to hypergravity Original Research Article
374
Development of mouse embryos co-cultured with polarized or non-polarized uterine epithelial cells using sequential culture media
375
Development of Mouse Preantral Follicle after In Vitro Culture in A Medium Containing Melatonin
376
Development of MtCu2+/LDPE nanocomposites with antimicrobial activity for potential use in food packaging
377
Development of mucoadhesive thiolated chitosan nanoparticles for biomedical applications
378
Development of mud crab breeding technology for conservation and communal livelihoods in the Setiu Wetlands, Terengganu, Malaysia
379
Development of mullite and mullite/Al2O3 precursor sols for electrophoretic deposition of oxidation protection coatings
380
Development of mullite and spinel coatings on graphite for improved water-wettability and oxidation resistance
381
Development of mullite/zirconia composites from a mixture of aluminum dross and zircon
382
Development of mullite-SiC nanocomposites by pyrolysis of filled polymethylsiloxane gels
383
Development of multi-channel gated integrator and PXI-DAQ system for nuclear detector arrays
384
Development of multi-channel gated integrator and PXI-DAQ system for nuclear detector arrays
385
Development of multicolor carbon nanoparticles for cell imaging
386
Development of multi-color scintillator based X-ray image intensifier
387
Development of multi-color scintillator based X-ray image intensifier
388
Development of multicomponent thermodynamic databases for use in process modelling and simulations Original Research Article
389
Development of multi-criteria decision making model for remanufacturing technology portfolio selection
390
Development of multidimensional academic information networks with a novel data cube based modeling method
391
Development of multidimensional fast field-cycling relaxometry
392
Development of Multidirectional Structural Testing System Applicable to Pseudodynamic Test
393
Development of multi-disciplinary team I-ADL assessment in community health care: an interrater reliability study of the measure of instrumental daily activity
394
Development of Multi-epitope Subunit Vaccine Against Pseudomonas aeruginosa Using OprF/OprI and PopB Proteins
395
Development of multifilamentary niobium–titanium and niobium–tin strands for the International Thermonuclear Experimental Reactor project
396
Development of Multifunctional Biofertilizer Formulation from Indigenous Microorganisms and Evaluation of Their N2-Fixing Capabilities on Chinese Cabbage Using 15N Tracer Technique
397
Development of multi-functional NITE-porous SiC for ceramic insulators
398
Development of multifunctional photoactive self-cleaning glasses
399
Development of multifunctional sol–gel coatings: Anti-reflection coatings with enhanced self-cleaning capacity
400
Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging
401
Development of Multi-gap Resistive Plate Chamber (MRPC) for medical imaging
402
Development of multi-gap resistive plate chambers with low-resistive silicate glass electrodes for operation at high particle fluxes and large transported charges
403
Development of multi-gap resistive plate chambers with low-resistive silicate glass electrodes for operation at high particle fluxes and large transported charges
404
Development of multi-layer crystal detector and related front end electronics
405
Development of multi-layer crystal detector and related front end electronics
406
Development of Multi-Layer Nanofiber Scaffolds for Corneal Epithelial Layer Using Silk Fibroin, Collagen, Aloe Vera, and Epithelial Growth Factor
407
Development of multilayer oxidation resistant coatings on niobium and tantalum
408
Development of multilayer textured Ca3Co4O9 materials for thermoelectric generators: Influence of the anisotropy on the transport properties
409
Development of multilayer transparent conductive coatings
410
Development of multi-layered microreactor with methanol reformer for small PEMFC
411
Development of multi-level adaptive control and scheduling solutions for shop-floor automation in reconfigurable manufacturing systems
412
Development of multilocus single strand conformation polymorphism (MLSSCP) analysis of virulence genes of Listeria monocytogenes and comparison with existing DNA typing methods
413
Development of multimaterial coatings by cold spray and gas detonation spraying
414
Development of Multimedia Learning Based on Digital Virtual Reality to Improve Students Skills in Delivery Service
415
Development of multimetal binding model and application to binary metal biosorption onto peat biomass
416
Development of multimetric index based on benthic macroinvertebrate for water quality assessment of Jajrood River in Iran
417
Development of multimodal membrane adsorbers for antibody purification using atom transfer radical polymerization
418
Development of multi-moderator neutron spectrometer using a pair of 6Li and 7Li glass scintillators
419
Development of multi-moderator neutron spectrometer using a pair of 6Li and 7Li glass scintillators
420
Development of Multiobjective High-Level Synthesis for FPGAs
421
Development of multiphase bioceramics from a filler-containing preceramic polymer
422
Development of multi-phase B–Si–C ceramic composite by reaction sintering
423
Development of multi-pinhole collimator for large imaging area with high spatial resolution
424
Development of multi-pinhole collimator for large imaging area with high spatial resolution
425
Development of multi-pixel photon counters for the T2K long baseline neutrino experiment
426
Development of multi-pixel photon counters for the T2K long baseline neutrino experiment
427
Development of multi-platform control and instrumentation communications to increase operational reliability – Application to MAST
428
Development of Multiple Big Data Analytics Platforms with Rapid Response
429
Development of multiple drywall with high sound insulation performance
430
Development of multiple emulsions based on the repulsive interaction between sodium caseinate and LBG
431
Development of multiple IQ maps for use in the selection of inpatriate managers: a practical theory
432
Development of multiple-species resolution hourly basis emissions inventory for Japan
433
Development of multiplex loop-mediated isothermal amplification-RFLP (mLAMP-RFLP) to detect Salmonella spp. and Shigella spp. in milk
434
Development of multiplex PCR for rapid detection of metallo-β-lactamase genes in clinical isolates of Acinetobacter baumannii
435
Development of Multiplex PCR for Simultaneous Detection of Three Pathogenic Shigella Species
436
Development of multiplex real-time PCR with Internal amplification control for simultaneous detection of Salmonella and Cronobacter in powdered infant formula
437
Development of Multiplex Reverse Transcription-Polymerase Chain Reaction for Simultaneous Detection of Influenza A, B and Adenoviruses
438
Development of multiplex-PCR assay for rapid detection of Candida spp.
439
Development of multiplex-PCR for Genetically Modified Organism (GMO) detection targeting EPSPS and Cry1Ab genes in soy and maize samples
440
Development of Multi-Point Micro-Punch: The Effects of Gold Plating on Discharge Time and Punch Surface
441
Development of multipoint vibrational coherent anti-Stokes Raman spectroscopy for flame applications
442
Development of multi-species consortia biofilms of oral bacteria as an enamel and root caries model system
443
Development of multi-species indicators for the Nevada Wildlife Action Plan
444
Development of Multispectral Atmospheric Retrieval Software for application to the atmosphere of MARS Original Research Article
445
Development of multispectral image processing algorithms for identification of wholesome, septicemic, and inflammatory process chickens Original Research Article
446
Development of Multistage Converter for Outdoor Thermal Electric Cooling (TEC) Applications
447
Development of multiwalled carbon nanotubes based micro-solid-phase extraction for the determination of trace levels of sixteen polycyclic aromatic hydrocarbons in environmental water samples
448
Development of multi-walled carbon nanotubes reinforced monetite bionanocomposite cements for orthopedic applications
449
Development of muon drift-tube detectors for high-luminosity upgrades of the Large Hadron Collider
450
Development of muon drift-tube detectors for high-luminosity upgrades of the Large Hadron Collider
451
Development of mutual inductance type sodium level detectors for PFBR
452
Development of MWD and branching during peroxide modification of High-Density Polyethylene by SEC-MALS and Monte Carlo simulation
453
Development of MY-DRG casemix pharmacy service weights in UKM Medical Centre in Malaysia
454
Development of myeloma and secondary myelodysplastic syndrome from a common clone
455
Development of myocardial hypertrophy in normotensive WKY rats  
456
Development of N,N-bis(perfluoroalkanesulfonyl)squaramides as new strong Brønsted acids and their application to organic reactions
457
Development of N-[11C]methylamino 4-hydroxy-2(1H)-quinolone derivatives as PET radioligands for the glycine-binding site of NMDA receptors Original Research Article
458
Development of N-[3-(2,4-Dichlorophenoxy)-2-18FFluoropropyl]-N-Methylpropargylamine (18 F-Fluoroclorgyline) as a Potential PET Radiotracer for Monoamine Oxidase-A
459
Development of N+ in P pixel sensors for a high-luminosity large hadron collider
460
Development of N+ in P pixel sensors for a high-luminosity large hadron collider
461
Development of n+-in-p large-area silicon microstrip sensors for very high radiation environments – ATLAS12 design and initial results
462
Development of n+-in-p large-area silicon microstrip sensors for very high radiation environments – ATLAS12 design and initial results
463
Development of N-2,4-pyrimidine-N-phenyl-N′-alkyl ureas as orally active inhibitors of tumor necrosis factor alpha (TNF-α) synthesis. Part 2
464
Development of N-2,4-pyrimidine-N-phenyl-N′-phenyl ureas as inhibitors of tumor necrosis factor alpha (TNF-α) synthesis. Part 1
465
Development of N-4,6-pyrimidine-N-alkyl-N′-phenyl ureas as orally active inhibitors of lymphocyte specific tyrosine kinase
466
Development of Nail Henna (Lawsonia Inermis Linn.) Leaf Powder as a Latent Fingerprint Visualization on Non-Porous and Porous Surfaces
467
Development of naive beliefs about moving objects: The straight-down belief in action
468
DEVELOPMENT OF NAMING, READING AND IMITATION SKILLS MANAGEMENT PROGRAMME FOR PATIENTS WITH BROCA S APHASIA
469
Development of nano- and microscale chondroitin sulfate particles for controlled growth factor delivery
470
Development of nano CeO2-incorporated high performance hot-dip zinc coating
471
Development of Nano Copper Sulfide (CuS) Structures for Electrochemical Detection of Vitamin C
472
Development of nano TiO2-incorporated phosphate coatings on hot dip zinc surface for good paintability and corrosion resistance
473
Development of nanocolloidal gold based immunochromatographic assay for rapid detection of transgenic vegetative insecticidal protein in genetically modified crops
474
Development of nano-columnar carbon coating for dry micro-stamping
475
Development of nano-composite adsorbent for removal of heavy metals from industrial effluent and synthetic mixtures; its conducting behavior Original Research Article
476
Development of nanocomposites based on hydroxyapatite/sodium alginate: Synthesis and characterisation
477
Development of nanocomposites for bone grafting
478
Development of nanocrystalline CrNbO4 based p-type semiconducting gas sensor for LPG, ethanol and ammonia
479
Development of nanocrystalline structure in Cu during friction stir processing (FSP)
480
Development of nanocrystalline TiO2–Er2O3 and TiO2–Ta2O5 thin film gas sensors: Controlling the physical and sensing properties
481
Development of nanocrystals in amorphous Al-alloys
482
Development of Nano-ELISA Method for Serological Diagnosis of Toxoplasmosis in Mice
483
Development of Nanoemulsion Based Gel Loaded with Phytoconstituents for the Treatment of Urinary Tract Infection and in Vivo Biodistribution Studies
484
Development of Nanoemulsion with ‎Vegetal Oils Enhanced by Melaleuca and ‎Lavender Essential Oils
485
Development of nanoemulsion-based antimicrobial activity of cinnamon prepared with soy protein isolate-lecithin
486
Development of nanofibrous scaffolds containing gum tragacanth/poly (ε-caprolactone) for application as skin scaffolds
487
Development of nanofiltration/steam stripping sequence for coke plant wastewater treatment Original Research Article
488
Development of nanomanipulator using a high-speed atomic force microscope coupled with a haptic device
489
Development of nanomanipulator using a high-speed atomic force microscope coupled with a haptic device
490
Development of nanophase CeO2-Pt/C cathode catalyst for direct methanol fuel cell
491
Development of nanophosphors—A review
492
Development of Nanoscale Temperature Measurement Technique Using Near-field Fluorescence
493
Development of nanosensors and bioprobes
494
Development of nanosilver and multi-walled carbon nanotubes thin-film nanocomposite membrane for enhanced water treatment
495
Development of Nanostructure Multilayer Co-Ni Alloy Coatings for Enhanced Corrosion Protection
496
Development of nano-structured Al–Si–Fe based bulk alloys from atomized powders
497
Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering
498
Development of nanostructured lipid carrier for dacarbazine delivery
499
Development of nanostructured Mg2Ni alloys for hydrogen storage applications
500
Development of Nanostructured Stress Free Pt-Rich FePt Films for Micro Electro Mechanical System Applications
501
Development of nanotechnology in light of sustainability
502
Development of Naphthalene Catabolism in Al and Fe contaminated soil
503
Development of NASBA®, a nucleic acid amplification system, for identification of Listeria monocytogenes and comparison to ELISA and a modified FDA method
504
Development of NASH in Obese Mice is Confounded by Adipose Tissue Increase in Inflammatory NOV and Oxidative Stress
505
Development of national innovation policy in small developing countries: the case of Cyprus
506
Development of national logistics in support of the Serbian Air Force: Long-term prospects
507
Development of natively textured surface hydrogenated Ga-doped ZnO-TCO thin films for solar cells via magnetron sputtering
508
Development Of Natural Convection Heat Transfer In Heat Sink Using A New Fin Design
509
Development of natural dyed textiles with thermo-regulating properties
510
Development of natural gas as a vehicular fuel in Pakistan: Issues and prospects
511
Development of natural late blight epidemics in pure and mixed plots of potato cultivars with different levels of partial resistance
512
Development of naturally activated edible films with antioxidant properties prepared from red seaweed Porphyra columbina biopolymers
513
DEVELOPMENT OF NATURE OF SCIENCE SCALE
514
Development of NAVDAS-AR: formulation and initial tests of the linear problem
515
Development of NAVDAS-AR: non-linear formulation and outer loop tests
516
Development of Navigation Skills through Audio Haptic Videogaming in Learners who are Blind
517
Development of Nb/sub 3/Sn conductors for fusion and high energy physics
518
Development of Nb–1%Zr–0.1%C alloy as structural components for high temperature reactors
519
Development of Nb3Sn superconducting wires for high field magnets at Kobe Steel and JASTEC Original Research Article
520
Development of n-body potentials for hcp–bcc and fcc–bcc binary transition metal systems
521
Development of Nb-V-Ti Hot-Rolled High Strength Steel With Fine Ferrite and Precipitation Strengthening Original Research Article
522
Development of Nd-Fe-B anisotropic bonded magnet with 27 MGOe
523
Development of NdFeB Magnet Industry in New Century Original Research Article
524
Development of near infrared reflectance spectroscopy (NIRS) calibration model for estimation of oil content in a worldwide safflower germplasm collection
525
Development of Near Infrared Reflectance Spectroscopy Calibrations to Estimate Legume Content of Multispecies Legume-Grass Mixtures
526
Development of near infrared sensors: Detection of influential factors by the AComDim method Original Research Article
527
Development of near infrared spectroscopy models for the quantitative prediction of the lignocellulosic components of wet Miscanthus samples
528
Development of Near Real-Time Monitoring and Data Archival of UiTM-SID System
529
Development of near-field optic/atomic-force microscope for biological materials in aqueous solutions
530
Development of near-field optic/atomic-force microscope for biological materials in aqueous solutions
531
Development of Near-Surface Composition Anomaly
532
Development of near-surface perched water tables during natural and artificial stemflow generation by babassu palms
533
Development of near-β high strength Ti alloy Ti-5Al-2Sn-4Zr-3Cr-3Mo with superior fatigue crack growth properties
534
Development of near-β high strength Ti alloy Ti-5Al-2Sn-4Zr-3Cr-3Mo with superior fatigue crack growth properties
535
Development of negative ion sources for the ITER neutral beam injector
536
Development of negligible depletion hollow fiber membrane-protected liquid-phase microextraction for simultaneous determination of partitioning coefficients and acid dissociation constants
537
Development of Neh2-Luciferase Reporter and Its Application for High Throughput Screening and Real-Time Monitoring of Nrf2 Activators Original Research Article
538
Development of Nerve Connections under the Control of Neurotrophic Factors: Parallels with Consumer–Resource Systems in Population Biology
539
Development of net energy ratio and emission factor for biohydrogen production pathways
540
Development of network-based pathway definitions: the need to analyze real metabolic networks
541
Development of networks in atom transfer radical polymerization of dimethacrylates
542
Development of neural network committee machines for automatic forest fire detection using lidar
543
Development of neural networks for identification of structural features from mass spectral data.
544
Development of Neural Networks for Noise Reduction
545
Development of neurochemical and behavioral sensitivity to ethanol in long-sleep and short-sleep mice
546
Development of neuro-fuzzifiers for qualitative analyses of milk yield
547
Development of neuro-fuzzy models to account for temporal and spatial variations in a lumped rainfall–runoff model
548
Development of neurotransmitter specificity in sympathetic ganglionic neurons
549
Development of Neutral and Nearly Neutral Theories
550
Development of neutron chambers with improved electrode design
551
Development of neutron chambers with improved electrode design
552
Development of neutron detector for engineering materials diffractometer at J-PARC
553
Development of neutron detector for engineering materials diffractometer at J-PARC
554
Development of neutron detector using the PIN photodiode with polyethylene (n,p) converter
555
Development of neutron detector using the surface barrier sensor with polyethylene (n, p) and 10B (n,α) converters
556
Development of neutron detector using the surface barrier sensor with polyethylene (n, p) and 10B (n,α) converters
557
Development of neutron radiography facility for boiling two-phase flow experiment in Kyoto University Research Reactor
558
Development of neutron radiography facility for boiling two-phase flow experiment in Kyoto University Research Reactor
559
Development of neutron radioscopy for the inspection of CF188 flight control surfaces
560
Development of neutron shielding material using metathesis-polymer matrix
561
Development of neutron shielding material using metathesis-polymer matrix
562
Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C
563
Development of new active packaging film made from a soluble soybean polysaccharide incorporated Zataria multiflora Boiss and Mentha pulegium essential oils
564
Development of new active packaging films coated with natural phenolic compounds to improve the oxidative stability of beef
565
Development of new adsorbent chitin for column preconcentration and spectrophotometric trace determination of Ziram and Zineb in synthetic, commercial samples and food-stuffs
566
Development of new Al-based nanocomposites by mechanical alloying
567
Development of new alumina-modified sorbents for CO2 sorption and regeneration at temperatures below 200 °C
568
Development of New Analogue from Soy Milk - Pantooa
569
Development of new analytical methods for selenium speciation in selenium-enriched yeast material
570
Development of new and efficient polymer-supported hypervalent iodine reagents
571
Development of new and validation of existing convection correlations for rooms with displacement ventilation systems
572
Development of new antiepileptic drugs: challenges, incentives, and recent advances
573
Development of new apertureless near-field scanning optical microscope tip using finite-differential time-domain calculation
574
Development of new asymmetric two-center catalysts in phase-transfer reactions
575
Development of new bolometers for rare events with background active discrimination
576
Development of new brain imaging agents based upon nocaine–modafinil hybrid monoamine transporter inhibitors
577
Development of New CAPS/dCAPS and SNAP Markers for Rice Eating Quality
578
Development of new carbon honeycomb structures from cellulose and pitch Original Research Article
579
Development of new catalytic systems for upgraded bio-fuels production from bio-crude-oil and biodiesel
580
Development of new chromanol antagonists of leukotriene D4
581
Development of new citizenship HSE model for schools and kindergartens of Tehran Metropolitan City
582
Development of new cleanup method of polychlorinated dibenzo-p-dioxins/dibenzofurans in fish by freezing-lipid filtration Original Research Article
583
Development of new Co–Cr–W-based biomedical alloys: Effects of microalloying and thermomechanical processing on microstructures and mechanical properties
584
Development of new CoMFA and CoMSIA 3D-QSAR models for anti-inflammatory phthalimide-containing TNFα modulators Original Research Article
585
Development of new composite biosorbents from olive pomace wastes
586
Development of new comprehensive relations to assess rock fragmentation by blasting for different open pit mines using GEP algorithm and MLR procedure
587
Development of new concepts and software tools for the optimization of manual assembly systems
588
Development of new Consolidity Theory for systems’ analysis and design in fully fuzzy environment
589
Development of new constitutive equations for the Mullins effect in rubber using the network alteration theory
590
Development of new core competencies for Taiwanese Emergency Medical Technicians
591
Development of new correlations for convective heat transfer and friction factor in turbulent regime for nanofluids
592
Development of new correlations for improved integrity assessment of pipes and pipe bends
593
Development of new corrosion-resistant and wear-resistant materials for use in agressive hydrogen medium
594
Development of new cutting fluid for grinding process adjusting mechanical performance and environmental impact
595
Development of new decorative coatings based on gold nanoparticles dispersed in an amorphous TiO2 dielectric matrix
596
Development of New Deep Venous Thrombosis While on Apixaban
597
Development of new device for measuring thermal stresses
598
Development of new DMAP-related organocatalysts for use in the Michael addition reaction of β-ketoesters in water
599
Development of new dyeing photoinitiators based on 6H-indolo[2,3-b]quinoxaline skeleton
600
Development of new elasticoluminescent material SrMg2(PO4)2:Eu
601
Development of new expression vector based on Pseudorabies virus amplicons: application to human insulin expression
602
Development of new frothers through hydrodynamic characterization
603
Development of New Generation Cooling Control System After Rolling in Hot Rolled Strip Based on UFC Original Research Article
604
Development of new generation cooperatives in agriculture for renewable energy research, development, and demonstration projects
605
Development of new glycosylation methodologies for the synthesis of archaeal-derived glycolipid adjuvants Original Research Article
606
Development of new green-fuel production technology by combination of fossil fuel and renewable energy
607
Development of new hole-transporting amorphous molecular materials for organic electroluminescent devices and their charge-transport properties
608
Development of new immunosensors for determination of contaminants in food
609
Development of new indicators to evaluate river fragmentation and flow regulation at large scales: A case study for the Mekong River Basin
610
Development of new indices to assess the contribution of moisture sources to indoor humidity and application to optimization design: Proposal of CRI(H) and a transient simulation for the prediction of indoor humidity
611
Development of New Indonesian Propolis Extract-Loaded Selfemulsifying: Characterization, Stability and Antibacterial Activity
612
Development of new instrumentation for epithermal neutron scattering at very low angles
613
Development of new instrumentation for epithermal neutron scattering at very low angles
614
Development of new interface potential for evaluating strength of SiC/SiC composite joint
615
Development of new iron catalysts for the tandem isomerization–aldol condensation of allylic alcohols
616
Development of new kinetic Monte Carlo simulator for hydrogen diffusion process in palladium–silver alloys
617
DEVELOPMENT OF NEW LOW COST DEFLUORIDATION TECHNOLOGY (KRASS)
618
DEVELOPMENT OF NEW LOW COST DEFLUORIDATION TECHNOLOGY (KRASS)
619
Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive
620
Development of new mass data acquisition system for diagnostics on JT-60U
621
Development of new materials for spintronics
622
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
623
Development of new metallic alloys for biomedical applications
624
Development of New Methodologies for Entry to Targets of Therapeutic Interest
625
Development of new methods to accelerate and improve the agglomeration of submicron particles by binding liquids
626
Development of new methods toward efficient immobilization of chiral catalysts
627
Development of new mixed Lux(RE3+)1−xAP:Ce scintillators (RE3+=Y3+ or Gd3+): comparison with other Ce-doped or intrinsic scintillating crystals
628
Development of new mixed Lux(RE3+)1−xAP:Ce scintillators (RE3+=Y3+ or Gd3+): comparison with other Ce-doped or intrinsic scintillating crystals
629
Development of New Modified Simple Polymerase Chain Reaction and Real-time Polymerase Chain Reaction for the Identification of Iranian Brucella abortus Strains
630
Development of new molten salts with LiNO3 and Ca(NO3)2 for energy storage in CSP plants
631
Development of New Monitoring System for Field Information of Real Time Power Consumption in Malaysia.
632
Development of new nanoparticulate vaccines against fish viruses in aquaculture
633
Development of new nickel based catalyst for biomass tar steam reforming producing H2-rich syngas
634
Development of new NiMo/γ-alumina catalysts doped with noble metals for deep HDS
635
Development of new no-flow underfill materials for both eutectic Sn-Pb solder and a high temperature melting leadfree solder
636
Development of new non-peptide GPIIb/IIIa antagonists, NSL-95315 and NSL-95317, isosteres of NSL-95300
637
DEVELOPMENT OF NEW OPHTHALMIC SUSPENSION PREDNISOLONE ACETATE 1%
638
Development of new ORIGEN2 data library sets for research reactors with light water cooled oxide and silicide LEU (20 w/o) fuels based on JENDL-3.3 nuclear data
639
Development of new palladium catalysts for the alkoxycarbonylation of aryl chlorides
640
Development of new patient-friendly therapeutic puncture needle with high insulation and good adhesion
641
Development of new polycations for cell encapsulation with alginate
642
Development of new polyolefin films with nanoclays for application in food packaging
643
Development of new population-averaged standard templates for spatial normalization and segmentation of MR images for postnatal piglet brains
644
Development of new positive-grid alloy and its application to long-life batteries for automotive industry
645
Development of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions
646
Development of New Predictive Equations to Estimate Basal Metabolic Rates in Iranian Adults: A Study Protocol
647
Development of new primers based on gapdh gene for Cercospora species and new host and fungus records for Iran
648
Development of new PVD coatings for magnesium alloys with improved corrosion properties
649
Development of new pyrrolopyrimidine-based inhibitors of Janus kinase 3 (JAK3)
650
Development of new quality index method (QIM) schemes for cuttlefish (Sepia officinalis) and broadtail shortfin squid (Illex coindetii)
651
Development of new quinoline-based photo-labile groups for photo-regulation of bioactive molecules
652
Development of new R, C and SDR modules for the SATEEC GIS system
653
Development of New Recombinant DgK Antigen for Diagnosis of Dirofilaria immitis Infections in Dogs Using ELISA Technique and Its Comparison to Molecular Methods
654
Development of new reference materials for the determination of cadmium, chromium, mercury and lead in polycarbonate Original Research Article
655
Development of new routes of severe plastic deformation through cyclic expansion–extrusion process
656
Development of new sealed UV sensitive gaseous detectors and their applications
657
Development of new sealed UV sensitive gaseous detectors and their applications
658
Development of new series of aluminium solid capacitors with organic semiconductive electrolyte (OS-CON)
659
Development of new simple molecular probes of DNA bulged structures
660
Development of new single-mode waveguide surface plasmon resonance sensor using a polymer imprint process for high-throughput fabrication and improved design flexibility
661
DEVELOPMENT OF NEW SMART METAL NANOMATERIALS BASED ON TITANIUM-DIOXIDE FOR PHOTOCATALYTIC AND ANTIMICROBIAL ACTIVITIES
662
Development of new solid-phase microextraction fibers by sol–gel technology for the determination of organophosphorus pesticide multiresidues in food
663
Development of New Sorbents: I. Ordered Porous Phase of Titanium Phosphate
664
Development of new SPME fibers by sol–gel technology for SPME-HPLC determination of organometals Original Research Article
665
Development of new standard procedures for the evaluation of dental composite abrasive wear
666
Development of New Sustainable Sahlep Production Methods Using Ophrys sphegodes subsp. mammosa (Desf.) Soo ex E. Nelson
667
Development of new systems to measure the aerodynamic forces on section models in wind tunnel testing
668
Development of New Technique for Reverse Engineering by Microstructure Features Detection
669
Development of new technologies and practical applications of plasma immersion ion deposition (PIID)
670
Development of New Technology for the Removal of Cr^6+ by Magnetic Nanoadsorbents from the Industrial or Sewage Wastewater
671
Development of new templating approach for hollow nanoparticles and their applications
672
Development of new testing method by centrifugal erosion tester at elevated temperature
673
Development of new TGMS lines with good floral traits in rice
674
Development of New Therapeutic Strategies in Gynecological Cancers in Iran by Utilizing Xenograft Model of Ovarian Adenocarcinoma
675
Development of New Tools to Detect Colistin-Resistance among Enterobacteriaceae Strains
676
Development of new trimetallic NiMoW catalysts supported on SBA-15 for deep hydrodesulfurization
677
Development of new type curves for production analysis in naturally fractured shale gas/tight gas reservoirs
678
Development of new type Ni–Mg texture-like structure hydrogen absorber
679
Development of new types of oxide cathodes
680
Development of new ulvan-like polymer by regioselective oxidation of gellan exopolysaccharide using TEMPO reagent
681
Development of new ulvan-like polymer by regioselective oxidation of gellan exopolysaccharide using TEMPO reagent
682
Development of new urea-functionalized silica stationary phases: Characterization and chromatographic performance
683
Development of new urea-functionalized silica stationary phases: Characterization and chromatographic performance
684
Development of new vegetable soybean (Glycine max L. Merill) mutants with high protein and less fibre content
685
Development of New Wear-Resistant Surface Coating at Elevated Temperature Original Research Article
686
DEVELOPMENT OF NEW WINTER AND SPRING WHEAT VARIETIES IN LATVIA
687
Development of new Wittig reagent, silylfuranmethylid, and its reactivity
688
Development of new X-ray imaging device sensitive to 0.1–100 keV
689
Development of new X-ray imaging device sensitive to 0.1–100 keV
690
Development of new X-ray microscopy using a low-energy electron beam
691
Development of new Z-factors for the evaluation of the circumferential surface crack in nuclear pipes Original Research Article
692
Development of new μ–e decay counter in new multi-channel μSR spectrometer for intense pulsed muon beam
693
Development of new μ–e decay counter in new multi-channel μSR spectrometer for intense pulsed muon beam
694
Development of new-tools to investigate toxicological hazard due to endocrine disruptor organochlorines and emerging contaminants in Mediterranean cetaceans
695
Development of new-type rapid analysis technology of polychlorinated biphenyls by using liquid chromatographic clean-up material (polyvinyl alcohol gel)
696
Development of Ni/Al and Ni/Ti/Al ohmic contact materials for p-type 4H-SiC
697
Development of Ni/Ti supermirrors with large-m and a curved surface
698
Development of Ni/Ti supermirrors with large-m and a curved surface
699
Development of NiAl-based intermetallic alloys: effect of chromium addition
700
Development of NiAl-based intermetallic alloys: effect of chromium addition
701
Development of nickel catalyst supported on MgO–TiO2 composite oxide for DIR-MCFC
702
Development of nickel coatings by TiN interlayer
703
Development of nickel/metal-hydride batteries for EVs and HEVs
704
Development of nickel–iron bimetallic catalytic layer for solid oxide fuel cells: Effect of citric acid
705
Development of nickel–phosphorus coatings containing micro particles of talc phyllosilicates
706
Development of Ni–Cu–Mg–Al catalysts for the synthesis of carbon nanofibers by catalytic decomposition of methane
707
Development of Ni–Fe bimetallic based catalysts for biomass tar cracking/reforming: Effects of catalyst support and co-fed reactants on tar conversion characteristics
708
Development of NiFe-CNT and Ni3Fe-CNT nanocomposites by mechanical alloying
709
Development of n-in-p silicon planar pixel sensors and flip-chip modules for very high radiation environments
710
Development of n-in-p silicon planar pixel sensors and flip-chip modules for very high radiation environments
711
Development of niobium containing acidic catalysts for glycerol esterification
712
Development of NiO-Co3O4 nano-ceramic composite materials as novel photocatalysts to degrade organic contaminants present in water
713
Development of Ni-P Alloy Coatings for Better Corrosion Protection Using Glycerol as Additive
714
Development of Nipa palm fibers for textiles
715
Development of Ni-Pd bimetallic catalysts for the utilization of carbon dioxide and methane by dry reforming Original Research Article
716
Development of Ni-Ti-B ternary catalysts for NaBH4 hydrolysis reaction and evaluation of their catalytic activities
717
Development of nitric oxide and nitric oxide synthase as ecotoxicological biomarkers in the tropical marine environment
718
Development of nitric oxide sensor for asthma attack prevention
719
Development of nitride-layer of AISI 304 austenitic stainless steel during high-temperature ammonia gas-nitriding
720
Development of nitrification hot-spots around degrading red clover (Trifolium pratense) leaves in soil
721
Development of nitrification inhibition assays using pure cultures of nitrosomonas and nitrobacter
722
Development of nitrile butadiene rubber–nanoclay composites with epoxidized natural rubber as compatibilizer
723
Development of nitrogen-blowing salt-induced solidified floating organic droplet microextraction for determination of phenolic oestrogens in milk samples
724
Development of nitrogen-containing nickel-free austenitic stainless steels for metallic biomaterials—review
725
Development of NO sorbents tolerant to sulfur oxides
726
Development of no valve solar ice maker
727
Development of NO2 and NOx land use regression models for estimating air pollution exposure in 36 study areas in Europe – The ESCAPE project
728
Development of nomogram for performance prediction of integrated collector-storage(ICS) solar water heating systems
729
Development of Nomogram to Predict the Best Military Category Using Physical Fitness Variables: A Model Development in Navy Trainees
730
Development of nomograms for prediction of extrusion stress for P/M copper preforms at warm working temperatures
731
Development of non polynomial spline and New B-spline with application to solution of Klein-Gordon equation
732
Development of non-deform micro-encapsulated phase change energy storage tablets
733
Development of non-destructive evaluation methods for degradation of HTGR graphite components
734
Development of nondestructive inspection techniques for measurement of void swelling in irradiated microscopy disks
735
DEVELOPMENT OF NON-DESTRUCTIVE MONITORING SYSTEM FOR CHLORIDE PENETRATION INTO REINFORCED CONCRETE STRUCTURES
736
Development of Nondestructive Screening Methods for Single Kernel Characterization of Wheat.
737
Development of non-destructive Youngʹs modulus measurement techniques in non-oriented CeF3 crystals
738
Development of non-destructive Youngʹs modulus measurement techniques in non-oriented CeF3 crystals
739
Development of non-destructive, non-contact single-cell based differential cell assay using on-chip microcultivation and optical tweezers
740
Development of Nonfertile and Evolutionary Mixed-Oxide Nuclear Fuels for Use in Existing Water Reactors
741
Development of non-flammable lithium secondary battery with room-temperature ionic liquid electrolyte: Performance of electroplated Al film negative electrode
742
Development of non-isothermal TGA–DSC for kinetics analysis of low temperature coal oxidation prior to ignition
743
Development of non-iterative self correcting solution (NONSS) method for the viscoplastic analysis with the Chaboche model
744
Development of non-keyboard input device checklists through assessments
745
Development of nonlinear analytical model and seismic analyses of a steel frame with self-centering devices and viscoelastic dampers
746
Development of nonlinear elastic leaf spring model for multibody vehicle systems Original Research Article
747
Development of Nonlinear Lattice-Hammerstein Filters for Gaussian Signals
748
Development of Nonlinear Transfer Matrix Method for Inelastic Analyses of Beams
749
Development of nonlinear weighted compact schemes with increasingly higher order accuracy
750
Development of non-perfluorinated hybrid materials for single-cell proton exchange membrane fuel cells
751
Development of nonproprietary phosphine ligands for the Pd-catalyzed amination reaction
752
Development of Non-Quenched Prehardened Steel for Large Section Plastic Mould Original Research Article
753
Development of non-standard arginine residue parameters for use with the AMBER force fields
754
Development of non-symmetric thiophene-fused BODIPYs
755
Development of norm for Adolescent Physical Literacy Questionnaire (APLQ) in Tehran
756
Development of normal phase-high performance liquid chromatography-atmospherical pressure chemical ionization-mass spectrometry method for the study of 6,6′-bis-(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo[1,2,4]-triazin-3-yl)-[2,2′]-bipyridine hydrolyti
757
Development of normal pressure and frictional traction along the walls of a steep conical hopper during filling
758
Development of normalization factors for Canada and the United States and comparison with European factors Original Research Article
759
Development of novel 19F NMR pH indicators: synthesis and evaluation of a series of fluorinated vitamin B6 analogues Original Research Article
760
Development of novel 2-[4-(aminoalkoxy)phenyl]-4(3H)-quinazolinone derivatives as potent and selective histamine H3 receptor inverse agonists
761
Development of novel active coating from Sagez and Sagez-zein to increase the shelf life of sweet lemon (Citrus limetta)
762
Development of novel adaptive single-pole autoreclosure schemes for extra high voltage transmission systems using wavelet transform analysis
763
Development of Novel Adhesive Bilayer Lyophilized Wafer of Moxifloxacin as a Modern Wound Dressing
764
Development of novel agar media for isolating guaiacol producing Alicyclobacillus spp.
765
Development of novel aligned nanofibrous composite membranes for guided bone regeneration
766
Development of novel amphiphilic magnetic molecularly imprinted polymers compatible with biological fluids for solid phase extraction and physicochemical behavior study
767
Development of novel and efficient synthesis of group 14 element (Ge and Sn) catenates by use of samarium (II) diiodide
768
Development of novel and sensitive methods for the determination of sulfide in aqueous samples by hydrogen sulfide generation-inductively coupled plasma-atomic emission spectroscopy Original Research Article
769
Development of novel antibacterial gel using clove and calendula extracts with colloidal silver nanoparticles
770
Development of Novel Antimicrobial Agents: Emerging Strategies: Editor: Karl Lohner. Horizon Scientific Press, Norfolk England, 2001; hard back, xi+284 pp.; ISBN: 1-898486-23-9; £84.99. Website:
771
Development of novel asymmetric ultra low pressure membranes and a preliminary study for bacteria and pathogen removal applications Original Research Article
772
Development of novel backwash cleaning technique for reverse osmosis in reclamation of secondary effluent
773
Development of Novel Binder for Hardmetal Powder Extrusion Molding
774
Development of novel bioactive composites by electrophoretic deposition
775
Development of novel biodegradable Au nanocomposite hydrogels based on wheat: For inactivation of bacteria
776
Development of novel blocked diisocyanate crosslinked chitosan membranes for pervaporation separation of water–isopropanol mixtures
777
Development of novel budesonide pellets based on CODESTM technology: In vitro/in vivo evaluation in induced colitis in rats
778
Development of novel carbon bonded filter compositions for steel melt filtration
779
Development of novel cell-permeable DNA sensitive dyes using combinatorial synthesis and cell-based screening
780
Development of novel chromium oxide/metallocene hybrid catalysts for bimodal polyethylene
781
Development of novel clutch utilizing self-locking mechanisms of belt
782
Development of Novel Continuous and Interval Exercise Programs by Applying the FITT-VP Principle in Dogs
783
Development of novel control strategy for multiple circuit, roof top bus air conditioning system in hot humid countries
784
Development of novel correlation for prediction of hydrate formation temperature based on intelligent optimization algorithms
785
Development of novel crosslinkable polymers for second-order nonlinear optical devices
786
Development of novel dental nanocomposites reinforced with polyhedral oligomeric silsesquioxane (POSS)
787
Development of novel detection reagent for simple and sensitive determination of trace amounts of formaldehyde and its application to flow injection spectrophotometric analysis Original Research Article
788
Development of novel diclofenac potassium controlled release tablets by wet granulation technique and the effect of co-excipients on in vitro drug release rates
789
Development of Novel Dimensionless Parameters for Accurate Estimation of Properties in Fluidized Beds
790
Development of novel electrospun nanofibrous scaffold from P. ricini and A. mylitta silk fibroin blend with improved surface and biological properties
791
Development of novel fiber-packed needle interface for off-line reversed-phase liquid chromatography–capillary gas chromatography
792
Development of novel glass-based composite seals for planar intermediate temperature solid oxide fuel cells
793
Development of novel grafted hybrid PVA membranes using glycidyltrimethylammonium chloride for pervaporation separation of water–isopropanol mixtures
794
Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy Original Research Article
795
Development of novel highly active and sulphur-tolerant catalysts for steam reforming of liquid hydrocarbons to produce hydrogen Original Research Article
796
Development of novel hydrogels by functionalization of sterculia gum for use in anti-ulcer drug delivery
797
Development of novel hydrogels by functionalization of sterculia gum for use in anti-ulcer drug delivery
798
Development of novel inexpensive adsorbents from waste concrete to mitigate NOx emissions
799
Development of novel Lewis acid catalyzed cycloisomerizations: synthesis of bicyclo[3.1.0]hexenes and cyclopentenones
800
Development of novel lipid–peptide hybrid compounds with antibacterial activity from natural cationic antibacterial peptides
801
Development of novel low temperature and low pressure ammonia synthesis catalyst Original Research Article
802
Development of novel LpxC inhibitors: chiral-pool synthesis of C-triazolyl glycosides
803
Development of novel magnetic nano-carriers for high-performance affinity purification
804
Development of novel membranes for PV separation of water–isopropanol mixtures using poly(vinyl alcohol) and gelatin
805
Development of novel method for measuring optical activity of solids and its applications
806
Development of novel method of non-viral efficient gene transfer into neonatal cardiac myocytes
807
Development of novel Mg–Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive response
808
Development of novel MnO2/nanoporous carbon composite electrodes in capacitive deionization technology Original Research Article
809
Development of novel molecularly imprinted magnetic solid-phase extraction materials based on magnetic carbon nanotubes and their application for the determination of gatifloxacin in serum samples coupled with high performance liquid chromatography
810
Development of novel molecularly imprinted solid-phase microextraction fiber and its application for the determination of triazines in complicated samples coupled with high-performance liquid chromatography
811
Development of novel mordenite-filled chitosan–poly(acrylic acid) polyelectrolyte complex membranes for pervaporation dehydration of ethylene glycol aqueous solution
812
Development of novel multilayer materials for impact applications: A combined numerical and experimental approach
813
Development of novel n+-in-p Silicon Planar Pixel Sensors for HL-LHC
814
Development of novel n+-in-p Silicon Planar Pixel Sensors for HL-LHC
815
Development of novel nano-biocomposite antioxidant films based on poly (lactic acid) and thymol for active packaging
816
Development of novel nanoparticles shelled with heparin for berberine delivery to treat Helicobacter pylori
817
Development of novel oil washing process using bubble potential energy
818
Development of novel on-chip, customer-design spiral biasing adaptor on for Si drift detectors and detector arrays for X-ray and nuclear physics experiments
819
Development of novel on-chip, customer-design spiral biasing adaptor on for Si drift detectors and detector arrays for X-ray and nuclear physics experiments
820
Development of novel optical waveguide surface plasmon resonance (SPR) sensor with dual light emitting diodes
821
Development of novel pervaporation membranes for the separation of water–isopropanol mixtures using sodium alginate and NaY zeolite
822
Development of novel photon detectors at UC Davis
823
Development of novel photon detectors at UC Davis
824
Development of novel polymer/quasicrystal composite materials
825
Development of novel polymer/quasicrystal composite materials
826
Development of novel polymer-type dehydrocondensing reagents comprised of chlorotriazines
827
Development of Novel Polymorphic EST-SSR Markers from the Cranberry Fruit Transcriptome
828
Development of novel porous radiant burners for LPG cooking applications
829
Development of Novel Potentiometric Sensors for Determination of Lidocaine Hydrochloride in Pharmaceutical Preparations, Serum and Urine Samples
830
Development of novel potentiometric sensors for determination of tartrazine dye concentration in foodstuff products
831
Development of novel process for Ru CMP using ceric ammonium nitrate (CAN)-containing nitric acid
832
Development of novel processable electron accepting conjugated polymers containing fluoranthene units in the main chain
833
Development of Novel Protocol to Al3+ Stress Tolerance at Germination Stage in Indica Rice through Statistical Approaches
834
Development of novel pyrrole synthesis for the preparation of intermediates of bioactive pyrrole alkaloids
835
Development of novel radiation-resistant insulation systems for fusion magnets
836
Development of novel rare earth doped fluoride and oxide scintillators for two-dimensional imaging
837
Development of novel reactions using ruthenium carbene catalyst and its application to novel methods for preparing nitrogen-containing heterocycles
838
Development of novel red phosphorescent iridium complex with phenyl-isoquinoline ligand for organic electroluminescent device
839
Development of novel red phosphorescent iridium complex with phenyl-isoquinoline ligand for organic electroluminescent device
840
Development of novel renewable energy based hydrogen production systems: A comparative study
841
Development of novel Ru catalyst of preferential CO oxidation for residential polymer electrolyte fuel cell systems
842
Development of novel self-humidifying composite membranes for fuel cells
843
Development of novel SiO2–GO nanohybrid/polysulfone membrane with enhanced performance
844
Development of novel sorbents for mercury control at elevated temperatures in coal-derived syngas: results of initial screening of candidate materials
845
Development of novel supported iridium nanocatalysts for special catalytic beds
846
Development of novel surface modified phase inversion membranes having hydrophobic surface-modifying macromolecule (nSMM) for vacuum membrane distillation Original Research Article
847
Development of novel surfactant-templated nanostructured thin SiO2, and SiO2–TiO2 films
848
Development of novel tail-modified anandamide analogs
849
Development of novel telomerase inhibitors based on a Bisindole unit
850
Development of novel ternary tellurite glasses for high temperature fiber optic mid-IR chemical sensing
851
Development of novel therapeutic strategy by regulating the nuclear hormone receptors
852
Development of novel titanium nitride-based decorative coatings by calcium addition
853
Development of Novel Topical Cosmeceutical Formulations from Nigella sativa L. with Antimicrobial Activity against Acne-Causing Microorganisms
854
Development of novel tribo composites with TiNi shape memory alloy matrix
855
Development of novel tungsten processing technologies for electro-chemical machining (ECM) of plasma facing components
856
Development of novel ultrasonic transducers for microelectronics packaging
857
Development of novel ultrathin structures based in amaranth (Amaranthus hypochondriacus) protein isolate through electrospinning
858
Development of novel water-soluble photocleavable protective group and its application for design of photoresponsive paclitaxel prodrugs Original Research Article
859
Development of novel wear-resistant materials: TiNi-based pseudoelastic tribomaterials
860
Development of novel α-chitin/nanobioactive glass ceramic composite scaffolds for tissue engineering applications
861
Development of novel α-chitin/nanobioactive glass ceramic composite scaffolds for tissue engineering applications
862
Development of novel β-amyloid probes based on 3,5-diphenyl-1,2,4-oxadiazole Original Research Article
863
Development of No-Vent™ liquid hydrogen storage system for space applications Original Research Article
864
Development of NOx sensing devices based on YSZ and oxide electrode aiming for monitoring car exhausts
865
Development of NSTX particle control techniques
866
Development of nuclear emulsions with spatial resolution for the AEgIS experiment
867
Development of nuclear emulsions with spatial resolution for the AEgIS experiment
868
Development of nuclear spectroscopy systems using high resolution semiconductor detector
869
Development of nuclear spectroscopy systems using high resolution semiconductor detector
870
Development of Numerical Eulerian-Eulerian Model forComputational Analysis of Potential in Chemical ProcessIntensification from Trickle Bed Reactors
871
Development of numerical model for FEM computation of oxygen transport through porous media coupled with micro-cell corrosion model of steel in concrete structures
872
Development of numerical scheme for phase field crystal deformation simulation
873
Development of numerical simulation code of membrane reactor for detritiation
874
Development of numerical simulation tools in the Euratom Framework Programmes
875
Development of nutrient rich noodles by supplementation with malted ragi flour
876
Development of obesity and neurochemical backing in aurothioglucose-treated mice
877
Development of obstructive hydrocephalus with lumboperitoneal shunting following subarachnoid hemorrhage
878
Development of obstructive hypertrophic cardiomyopathy from nonobstructive hypertrophic cardiomyopathy
879
Development of Occupational Resilience Beliefs Scale for Teacher Candidates
880
Development of Oculimacula yallundae and O. acuformis (eyespot) on leaf sheaths of winter wheat in the UK in relation to thermal time
881
Development of odor recorder with enhanced recording capabilities based on real-time mass spectrometry
882
Development of off-line layer chromatographic and total reflection X-ray fluorescence spectrometric methods for arsenic speciation
883
Development of offset channels across the San Andreas fault
884
Development of offshore wind power in China
885
Development of O–H insertion for the attachment of phosphonates to nucleosides; synthesis of α-carboxy phosphononucleosides
886
Development of oil Approaches Influenced by Effective Factors for Success of Economy-Based Entrepreneurship: A Case Study of the oil Industry
887
Development of oil formation theories and their importance for peak oil
888
Development of oil hydrocarbon fingerprinting and identification techniques
889
Development of olefin metathesis catalyst precursors bearing nucleophilic carbene ligands
890
Development of oligoarginine–drug conjugates linked to new peptidic self-cleavable spacers toward effective intestinal absorption
891
Development of oligonucleotide primers from the 16S-23S rRNA intergenic sequences for identifying different dairy and probiotic lactic acid bacteria by PCR
892
Development of oligopeptide-based novel biosensor by solid-phase peptide synthesis on microchip
893
Development of Olympic Values Knowledge Test: A Study on Secondary School 5th Grade Students
894
Development of omni-directional correlation functions for nonlinear model validation
895
Development of OMP based indirect ELISA to gauge the antibody titers in bovines against Pasteurella multocida
896
Development of onboard friction control
897
Development of one-dimensional model for initial design and evaluation of oil-free Co2 turbo-compressor
898
Development of one-energy group, two-dimensional, frequency dependent detector adjoint function based on the nodal method
899
Development of one-group interfacial area transport equation in bubbly flow systems
900
Development of one-pot synthesis of α-hydroxy α-trifluoromethyl amides
901
Development of one-step hollow fiber supported liquid phase sampling technique for occupational workplace air analysis using high performance liquid chromatography with ultra-violet detector
902
Development of on-line comprehensive two-dimensional liquid chromatography method for the separation of biomass compounds
903
Development of online high-/low-pH reversed-phase–reversed-phase two-dimensional liquid chromatography for shotgun proteomics: A reversed-phase-strong cation exchange-reversed-phase approach
904
Development of online instructional resources for Earth system science education: An example of current practice from China
905
Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content
906
Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content
907
Development of online sampling and matrix reduction technique coupled liquid chromatography/ion trap mass spectrometry for determination maduramicin in chicken meat
908
Development of On-line Shopping Mart System for Developing Countries
909
Development of on-line single-drop micro-extraction sequential injection system for electrothermal atomic absorption spectrometric determination of trace metals Original Research Article
910
Development of On-step Electrochemical Synthesis to Fabricate Three-dimensional N-doped Porous Graphene/magnetic Nanocomposite as novel superparamagnetic material for bio-medicinal uses
911
Development of Oocytes and Preimplantation Embryos of Mice Fed Diet Supplemented with Dunaliella salina
912
Development Of Open Leadership Scale
913
Development of Open Pore Copper Foams to Use as Bipolar Plates in Polymer Electrolyte Membrane Fuel Cell Stacks
914
Development of open-air type electrolyte-as-cathode glow discharge-atomic emission spectrometry for determination of trace metals in water
915
Development of open-cathode polymer electrolyte fuel cells using printed circuit board flow-field plates: Flow geometry characterisation
916
Development of Open-pit Mine Reclamation Cost Estimation Models: A Regression-based Approach
917
Development of operation and maintenance technology for HTGRs by using HTTR (High Temperature engineering Test Reactor)
918
Development of operation-aided system for chemical processes
919
Development of operational guidelines for thermally activated building system according to heating and cooling load characteristics
920
Development of Operational Strategies for Branding Ferula assa- foetida L. Medicinal Plant (Case study: Rangelands of Kerman Province, Iran)
921
Development of Opinions of Tourism Students at the Prague University of Economics and Business on the COVID-19 Pandemic
922
Development of optical computerized tomography in capacitively coupled plasmas and inductively coupled plasmas for plasma etching
923
Development of optical digital interferometry technique for measurement of thermodiffusion coefficients
924
Development of optical immunosensors for detection of proteins in serum
925
Development of optical naphthalene sublimation method
926
Development of optical nonlinearity, high dielectric constant and ferromagnetic behavior in a silicate glass nanocomposite by suitable heat treatment
927
Development of optical probes for in vivo imaging of polarized macrophages during foreign body reactions
928
Development of optical switching readout X-ray detector for high-speed imaging
929
Development of optical switching readout X-ray detector for high-speed imaging
930
Development of optimal and robust predictive guidance technique for Mars aerocapture
931
Development of Optimal Decoking Scheduling Strategies for an Industrial Naphtha Cracking Furnace System
932
Development of optimal design formula for bi-tuned mass dampers using multi-objective optimization
933
Development of optimal fuzzy models for predicting the strength of intact rocks
934
Development of optimal layout design system in multihole blanking process
935
Development of Optimal Poly-Alumino-Iron Sulphate Coagulant
936
Development of optimal protocol for visible and near-infrared reflectance spectroscopic evaluation of meat quality
937
Development of optimal protocol for visible and near-infrared reflectance spectroscopic evaluation of meat quality
938
Development of optimal salesforce compensation plans for independent, complementary and substitutable products
939
DEVELOPMENT OF OPTIMALLY DISORDERED CRITICAL RANDOM EXCITATION
940
Development of optimised carrier sequence in MCU-based random-frequency PWM
941
Development of optimization procedures for application-specific chemical sensing
942
Development of optimization technique of warm shrink fitting process for automotive transmission parts (3D FE analysis)
943
Development of optimized autonomous self-healing systems for epoxy materials based on maleimide chemistry
944
Development of optimized Cu–ZSM-5 deNOx catalytic materials both for HC-SCR applications and as FCC catalytic additives Original Research Article
945
Development of optimized point cloud merging algorithms for accurate processing to create earthwork site models
946
Development of optimized vascular fractal tree models using level set distance function
947
Development of optimized washer-shape for damage-free load application to composites
948
Development of optimized weighted-ENO schemes for multiscale compressible flows
949
Development of optimum manufacturing technologies of radial plates for the ITER toroidal field coils
950
Development of optimum process design system for sheet fabrication using response surface method
951
Development of orbitofrontal function: Current themes and future directions
952
Development of ordered organic monolayers (A perspective on “Self-assembly of 2,6-dimethyl pyridine on Cu(1 1 0) directed by weak hydrogen bonding” by J. Lee, D.B. Dougherty, J.T. Yates Jr.)
953
Development of ore sorting and its impact on mineral processing economics
954
Development of Organoiron Methodology for Preparation of the Polyene Natural Product Macrolactin A
955
Development of Organoiron Methodology for the C8-C16 Dienylamine Segment of the Streptogramin Antibiotics
956
Development of Organ-on-Chip for the Study of Placental Pathologies: A Ten-Year Study of Literature Published
957
Development of orientation during electrospinning of fibres of poly(ε-caprolactone)
958
Development of orientation with drawing in polystyrene films: effects of time and temperature
959
Development of oriented morphology and tensile properties upon superdawing of solution-spun fibers of ultra-high molecular weight poly(acrylonitrile)
960
Development of ornithine biosensor and application to estimation of prawn freshness
961
Development of oscillation method for reducing foodborne pathogens on lettuce and spinach
962
Development of O-serogroup specific PCR assay for detection and identification of Vibrio parahaemolyticus
963
Development of Osmotically Controlled Mucoadhesive Cup-Core (OCMC) Tablet for The Anti-Inflammatory Activity
964
Development of osteonecrosis after arthroscopic meniscal and chondral knee surgery: a report of five cases
965
Development of osteopenia in ovariectomized cynomolgus monkeys (Macaca fascicularis)
966
Development of ovine fetal ileal motility: role of muscarinic receptor subtypes
967
Development of oxazolidines derived from polyisobutylene succinimides as multifunctional stabilizers of asphaltenes in oil industry
968
Development of oxidation and corrosion resistance hydrophobic graphene oxide-polymer composite coating on copper
969
Development of oxidation resistant coatings for γ-TiAl based alloys
970
Development of oxidation resistant coatings for γ-TiAl based alloys
971
Development of Oxidative Stress in the Cells of Chlorella stigmatophoraand Their Bleaching by the Glycolate Pathway Inhibition under Salinization Conditions
972
Development of oxide dispersion strengthened W alloys produced by hot isostatic pressing
973
Development of oxide thick film capacitors for a real time pressure monitoring system
974
Development of oxides dispersion strengthened steels for high temperature nuclear reactor applications
975
Development of oxidised and heat–moisture treated potato starch film
976
Development of oxidized phosphatidylcholine isomer profiling method using supercritical fluid chromatography/tandem mass spectrometry
977
Development of oxygen electrodes for reversible solid oxide fuel cells with scandia stabilized zirconia electrolytes
978
Development of oxygen meters for the use in lead–bismuth
979
DEVELOPMENT OF OXYGEN MICROSENSORS FOR MONITORING CYANOBACTERIAL PHOTOSYNTHESIS IN ROMAN HYPOGEA
980
Development of oxygen scavenging system containing a natural free radical scavenger and a transition metal
981
Development of oxygen transport membrane La0.2Sr0.8CoO3−δ/Ce0.8Gd0.2O2−δ on the tubular CeO2 support Original Research Article
982
Development of oxygen-permeable ceramic membranes for NOx-sensors
983
Development of ozone-precursor relationships using VOC receptor modeling
984
Development of Pacemaker Lead Thrombosis in a Patient with Atrial Fibrillation during Apixaban Treatment
985
Development of packed-column suppressor system for capillary ion chromatography and its application to environmental waters
986
development of pairing card learning media to improve the ability to recognize the concept of numbers
987
DEVELOPMENT OF PAKISTAN’S TECHNICAL AND VOCATIONAL EDUCATION AND TRAINING (TVET): AN ANALYSIS OF SKILLING PAKISTAN REFORMS
988
Development of palladium L-edge X-ray absorption spectroscopy and its application for chloropalladium complexes
989
Development of palladium(II)-catalyzed oxidative cyclization of olefinic keto and/or lactone esters
990
Development of palm-sized differential plasmon resonance meter based on concept of Sprode
991
Development of PAMAM dendrimer composite membranes for CO2 separation
992
Development of Papads: A Traditional Savoury With Purslane, Portulaca oleracea, Leaves
993
Development of Parabolic Weirs for Simplified Discharge Measurement
994
Development of parallel DEM for the open source code MFIX
995
Development of parallel spark electrical discharge machining
996
Development of parallel wire regenerator for cryocoolers Original Research Article
997
Development of parallellized higher-order generalized depletion perturbation theory for application in equilibrium cycle optimization
998
Development of parameter based fault detection and diagnosis technique for energy efficient building management system
999
Development of parthenogenetic and cloned ovine embryos: effect of activation protocols
1000
Development of Parthenogenetic Rat Embryos
بازگشت