<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Analysis of a coloured Dutch map from the eighteenth century: The need for a multi-analytical spectroscopic approach using portable instrumentation Original Research Article
2
Analysis of a combined converter-electromagnetic device by taking into account its control loop
3
Analysis of a combined power and ejector-refrigeration cycle using low temperature heat
4
Analysis of a combined power and refrigeration cycle by the exergy method
5
Analysis of a combined Rankine–vapour–compression refrigeration cycle
6
Analysis of a complex crop production system in interdependent agro-ecological zones: a methodological approach for potatoes in Argentina
7
Analysis of a complex polysaccharide (gum arabic) by multi-angle laser light scattering coupled on-line to size exclusion chromatography and flow field flow fractionation
8
Analysis of a complex toppling-circular slope failure
9
Analysis of a compression shear fracture test for curved interfaces in layered composites
10
ANALYSIS OF A COMPUTER-AIDED TELEOPERATION PROCESS BY MEANS OF GENERALIZED STOCHASTIC PETRI NETS
11
Analysis of a conjugated infinite element method for acoustic scattering
12
Analysis of a consensus fragment in ERIC-PCR fingerprinting of Enterobacter sakazakii
13
Analysis of a constitutional balanced translocation T(1;17)(p36;q 11.2-12.1) in a neuroblastoma patient
14
Analysis of a contention-based opportunistic spectrum access under general channel activity model
15
Analysis of a continuous car-following model for a bus route: existence, stability and bifurcations of synchronous motions
16
Analysis of a continuum-based beam element in the framework of explicit-FEM
17
Analysis of a coronal loop on the limb Original Research Article
18
Analysis of a counter-current vapor flow absorber
19
Analysis of a coupled pair of Cahn-Hilliard equations with nondegenerate mobility
20
Analysis of a coupled system of equations of a global geodynamic model of the earth Original Research Article
21
Analysis of a coupled-channel continuum approach for spectra of mass-17 compound systems
22
Analysis of a crack in a finite thermopiezoelectric plate under heat flux
23
Analysis of a crack in a functionally graded strip with a power form shear modulus
24
Analysis of a crack in a half-plane piezoelectric solid with traction-induction free boundary
25
Analysis of a cryolava flow-like feature on Titan
26
Analysis of a curved beam on uncertain elastic foundation
27
ANALYSIS OF A CYLINDRICAL BEARING WITH HELICAL GROOVES AND A BRANCHING GAS LUBRICANT FLOW IN VARIOUS OPERATING MODES
28
ANALYSIS OF A CYLINDRICAL BEARING WITH HELICAL GROOVES AND A BRANCHING GAS LUBRICANT FLOW IN VARIOUS OPERATING MODES
29
Analysis of a database of public domain Brazilian patent documents based on the I PC
30
Analysis of a DC motor drive in the presence of unbalance
31
Analysis of a deep well recharge experiment by calibrating a reactive transport model with field data
32
Analysis of a defect correction method for viscoelastic fluid flow
33
Analysis of a defective renewal equation arising in ruin theory
34
Analysis of a delayed predator–prey system with impulsive diffusion between two patches
35
Analysis of a delayed SIR model subject to multiple infectious stages and nonlinear incidence rate
36
Analysis of a dengue disease transmission model
37
Analysis of a detention basin impact on dike failure probabilities and flood risk for a channel-dike-floodplain system along the river Elbe, Germany
38
Analysis of a dielectric crack in a magnetoelectroelastic layer
39
Analysis of a diesel generator crankshaft failure
40
Analysis of a diesel generator cylinder failure
41
Analysis of a differential equation model of HIV infection of CD4+ T -cells with saturated reverse function
42
Analysis of a dimethacrylate copolymer (Bis-GMA and TEGDMA) network by DSC and 13C solution and solid-state NMR spectroscopy
43
Analysis of a diode-pumped Nd:YVO4 laser passively Q switched with GaAs
44
Analysis of a direct expansion solar assisted heat pump using different refrigerants
45
Analysis of a directional hydraulic valve by a Direct Numerical Simulation using an immersed-boundary method
46
Analysis of a discrepancy in electron–beam dose comparison between chemical dosimeters and a calorimeter
47
Analysis of a discrete-time GI–G–1 queueing model subjected to bursty interruptions
48
Analysis of a Discrete-Time Impatient Customer Queue with Bernoulli-Schedule Vacation Interruption
49
Analysis of a discrete-time preemptive resume priority buffer
50
Analysis of a discrete-time queue with gated priority
51
Analysis of a discrete-time queue with general three-state Markovian traffic sources
52
Analysis of a disk-type stator for the piezoelectric ultrasonic motor using impedance matrix
53
Analysis of a dissimilar finite wedge under antiplane deformation
54
Analysis of a distributed group technology methodology
55
Analysis of a Dominant Retailer Dual-Channel Supply Chain under Customers’ Channel Preference: The α-Branch and Bound Solution Algorithm
56
Analysis of a double pipe heat exchanger performance by use of porous baffles and pulsating flow
57
Analysis of a double step microstrip discontinuity using generalized transmission line equations
58
ANALYSIS OF A DOUBLE-LAYERED VIVALDI ANTENNA INSIDE A METALLIC ENCLOSURE
59
Analysis of a DPSK soliton transmission system
60
Analysis of a drift–diffusion model with velocity saturation for spin-polarized transport in semiconductors
61
Analysis of a dry friction problem under small displacements: application to a bolted joint
62
Analysis of a dual sourcing inventory model with normal unit demand and Erlang mixture lead times
63
Analysis of a dynamic contact problem for electro-viscoelastic cylinders Original Research Article
64
Analysis of a Dynamic Frictional Contact Problem for Thermo-Elastic-Viscoplastic Materials with Damage
65
Analysis of a dynamic frictional contact problem with damage
66
Analysis of a Dynamic Voltage Compensator With Reduced Switch-Count and Absence of Energy Storage System
67
Analysis of a European TMF inter-comparison exercise
68
Analysis of a failed alumina THR ball head
69
Analysis of a failed Detroit Diesel series 149 generator
70
Analysis of a failed spur gear from a Vibro-Hammer
71
Analysis of a fatal bungee-jumping accident
72
Analysis of a feasible polygeneration system for power and methanol production taking natural gas and biomass as materials
73
Analysis of a feasible tariff policy for the introduction of high efficiency electric motors in Brazil
74
Analysis of a feed and bleed procedure sensitivity study, performed with the SIPACT simulator, on a French 900 MWe NPP Original Research Article
75
Analysis of a femoral hip prosthesis designed to reduce stress shielding
76
Analysis of a ferroresonant circuit using bifurcation theory and continuation techniques
77
Analysis of a ferroresonant circuit with chaotic behavior by means of a Chua-type magnetization model
78
Analysis of a Few Words in Shahnameh: East and Northwest Iranian
79
Analysis of a fibre laser welding case study, utilising a matrix flow chart
80
Analysis of a finite buffer model with two servers and two nonpreemptive priority classes
81
Analysis of a Finite Buffer with Non-preemptive Priority Scheduling
82
Analysis of a finite element numerical solution for a nonlinear seepage flow model in a deformable dual media fractal reservoir
83
ANALYSIS OF A FINITE-DIFFERENCE SCHEME FOR A LINEAR ADVECTION–DIFFUSION–REACTION EQUATION
84
Analysis of a finite-difference scheme for a singularly perturbed problem with two small parameters
85
Analysis of a firn core for assessing POP seasonal accumulation on an Alpine glacier
86
Analysis of a FitzHugh-Nagumo-Rall model of a neuronal network
87
Analysis of a flexible web on a grooved concave surface under softEHL
88
Analysis of a fluid-loaded thick plate
89
Analysis of a fluorescence depletion process of Rhodamine 6G in a PMMA matrix induced by nano- and picosecond lasers
90
ANALYSIS OF A FORCED STRONGLY NON-LINEAR TWO-DEGREE-OF-FREEDOM SYSTEM BY MEANS OF THE POWER-SERIES METHOD
91
Analysis of a fractional SIQR model with Caputo-Fabrizio derivative
92
Analysis of a Fractional-Step Method on Overset Grids
93
Analysis of a Framework for E-Commerce Consumer Behavior before and During Covid-19
94
Analysis of a free surface film from a controlled liquid impinging jet over a rotating disk including conjugate effects, with and without evaporation
95
Analysis of a frictional–kinetic model for gas–particle flow
96
Analysis of a fuel cell micro-grid with a small-scale wind turbine generator
97
Analysis of a full spectrum hybrid lighting system
98
Analysis of a functional lactate permease in the fungus Rhizopus
99
Analysis of a Functionally Graded Finite Wedge Under Antiplane Deformation
100
Analysis of a functionally graded particulate composite under flexural loading conditions
101
Analysis of a fuzzy economic order quantity model for deteriorating items under retailer partial trade credit financing in a supply chain
102
Analysis of a gas-phase partitioning tracer test conducted in an unsaturated fractured-clay formation
103
Analysis of a GC/MS Thermal Desorption System with Simultaneous Sniffing for Determination of Off-Odor Compounds and VOCs in Fumes Formed during Extrusion Coating of Low-Density Polyethylene
104
Analysis of a Gelatin Factory Farm Product (Wheat)
105
Analysis of a general limited scheduling mechanism for a distributed communication system
106
Analysis of a general service nonexhaustive polling system using a heuristic combination method and pseudoconservation law
107
Analysis of a GI/M/1 queue with multiple working vacations
108
Analysis of a giant lightning storm on Saturn
109
Analysis of a ginger extract by high-performance liquid chromatography coupled to nuclear magnetic resonance spectroscopy using superheated deuterium oxide as the mobile phase
110
Analysis of a glass fibre reinforced polyurethane composite repair system for corroded pipelines at elevated temperatures
111
Analysis of a glucocorticoid–estrogen receptor chimera reveals that dimerization energetics are under ionic control Original Research Article
112
Analysis of a hard strip-loaded conical horn by the method of generalized scattering matrices
113
Analysis of a harvested discrete-time biological models
114
Analysis of a heat recirculating cooler for fuel gas sulfur removal in solid oxide fuel cells
115
Analysis of a helical quadrupole focusing channel
116
Analysis of a helical quadrupole focusing channel
117
Analysis of a heuristic for acyclic edge colouring
118
Analysis of a high intensity shear zone between overlapping fiber ends in a polymer matrix composite
119
Analysis of a high power ferrite differential phase shift circulator operating above ferrimagnetic resonance
120
Analysis of a high temperature heater in a false twist texturing process
121
Analysis of a high throughput n-dodecane fueled heterogeneous/homogeneous parallel plate microreactor for portable power conversion
122
Analysis of a high-concentration copper in metal alloys by emission spectroscopy of a laser-produced plasma in air at atmospheric pressure
123
Analysis of a high-order iterative learning control algorithm for uncertain nonlinear systems with state delays
124
Analysis of a high-power-factor AC-DC converter with reduced current and voltage stresses
125
Analysis of a high-resolution optical wave-front control system
126
Analysis of a high-temperature heat exchanger for an externally-fired micro gas turbine
127
Analysis of a historical extirpation of the bearded vulture Gypaetus barbatus (L.) in the western Alps (France-Italy): Former distribution and causes of extirpation Original Research Article
128
Analysis of a hybrid composite/metal bolted connection subjected to flexural loading
129
Analysis of a hydrodynamic thrust bearing with elastic deformation using a recurrent neural network
130
Analysis of a hydrogen station roll-out strategy to introduce hydrogen vehicles in Andalusia
131
Analysis of a hydrometallurgical route to recover base metals from spent rechargeable batteries by liquid–liquid extraction with Cyanex 272
132
Analysis of a hydrostatic transmission driveline for its use in off-road multiple axle vehicles
133
Analysis of a hydrostatic transmission system using low speed high torque motor
134
Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused Biological Tissues with Laser Heating
135
Analysis of a Hyperbolic System Modelling the Thermoelastic Impact of Two Rods
136
Analysis of a hysteretic circuit containing an iron-cored inductor and a semiconductor switch
137
Analysis of a J69-T-25 engine turbine blade fracture
138
Analysis of a Japan government intervention on the domestic agriculture market
139
Analysis of a Jet Pump Performance under Different Primary Nozzle Positions and Inlet Pressures using two Approaches: One Dimensional Analytical Model and Three Dimensional CFD Simulations
140
Analysis of a jet–mixing layer interaction
141
Analysis of a jet-pump-assisted vacuum desalination system using power plant waste heat Original Research Article
142
Analysis of a kernel-based method for some pricing financial options
143
Analysis of a kinetic cellular model for tumor-immune system interaction
144
Analysis of a laboratory jigging system for improved performance
145
Analysis of a lagoon ecological model with anoxic crises and impulsive harvesting
146
Analysis of a laminated anisotropic plate by Chebyshev collocation method
147
Analysis of a Large Database of GCL Internal Shear Strength Results
148
Analysis of a Large Eddy Simulation model based on anisotropic filtering
149
Analysis of a large number of vias and differential signaling in multilayered structures
150
Analysis of a latent thermocline storage system with encapsulated phase change materials for concentrating solar power
151
Analysis of a LEACHN-based management technique in ‘predictive mode’
152
Analysis of a leap-frog pseudospectral scheme for the Schrِdinger equation
153
Analysis of a least-squares finite element method for the thin plate problem
154
Analysis of a Left-Shift Binary GCD Algorithm
155
Analysis of a Leslie–Gower-type prey–predator model with periodic impulsive perturbations
156
Analysis of a Linear Induction Motor with Solid Iron Secondary
157
Analysis of a link of embrittlement mechanisms and neutron flux effect as applied to reactor pressure vessel materials of WWER
158
Analysis of a loaded elastic wheel rolling down a circular track
159
Analysis of a Local Search Heuristic for Facility Location Problems
160
Analysis of a long-lasting haze episode in Nanjing, China
161
Analysis of a long-period grating inscribed in the core of a fibre with inverse parabolic-index cladding
162
Analysis of a long-term pumping and tracer test using the channel network model
163
ANALYSIS OF A LOSSY MICRORING USING THE GENERALIZED MULTIPOLE TECHNIQUE
164
Analysis of a Lotka–Volterra food chain chemostat with converting time delays
165
Analysis of a low-complexity change detection scheme
166
Analysis of a Low-Pass Filter Employing a 4-Pin Capacitor
167
Analysis of a magnetic refrigerator
168
Analysis of a major load island outage on the Potomac Electric Power Company system
169
Analysis of a Major Phenolic Glucoside and Biochemistry Compounds from Curculigo Orchioides Gaertn
170
Analysis of a Malakisi barn used for tobacco curing in East and Southern Africa
171
ANALYSIS OF A MALARIA DISEASE MODEL WITH DIRECT TRANSMISSION
172
Analysis of a Malaria Transmission Model in Children
173
Analysis of a martensitic stainless steel that failed due to the presence of coarse carbides
174
Analysis of a mathematical model for tuberculosis: What could be done to increase case detection
175
Analysis of a mathematical model for tumor growth under indirect effect of inhibitors with time delay in proliferation
176
Analysis of a Mathematical Model of Protocell
177
Analysis of a mathematical model of the effect of inhibitors on the growth of tumors
178
Analysis of a Mathematical Model of the Growth of Necrotic Tumors
179
Analysis of a Mathematical Model to Investigate the Dynamics of Dengue Fever
180
Analysis of a measured neutron background below 6 MeV for fast-neutron imaging systems
181
Analysis of a measured neutron background below 6 MeV for fast-neutron imaging systems
182
Analysis of a mechanical pulp and paper mill using advanced composite curves
183
Analysis of a mechanical vapor compression desalination system Original Research Article
184
Analysis of a melting model for an extruder with reciprocation
185
Analysis of a membrane based air-dehumidification unit for air conditioning in tropical climates
186
ANALYSIS OF A MEMBRANE SAFETY DEVICE WITH A RUPTURE ROD
187
ANALYSIS OF A MEMBRANE SAFETY DEVICE WITH A RUPTURE ROD
188
Analysis of a MEMS transmission line
189
Analysis of a mesoscale infiltration and water seepage test in unsaturated fractured rock: Spatial variabilities and discrete fracture patterns
190
Analysis of a metal hydride cold storage module
191
Analysis of a metal hydride reactor for hydrogen storage
192
Analysis of a metallic reflector grating with the influence of the Joule loss taken into account
193
Analysis of a method for extracting angularly collimated UCNs from a volume without losing the density inside
194
Analysis of a method for extracting angularly collimated UCNs from a volume without losing the density inside
195
Analysis of a Microbial Community Oxidizing Inorganic Sulfide and Mercaptans
196
Analysis of a micropolarizer array-based simultaneous phase-shifting interferometer
197
Analysis of a microscale ‘Saturation Phase-change Internal Carnot Engine’
198
Analysis of a minimal model for p53 oscillations
199
Analysis of a mixed finite element method for the Reissner-Mindlin plate problems Original Research Article
200
Analysis of a mixed semi-implicit/implicit algorithm for low-frequency two-fluid plasma modeling
201
Analysis of a mixture containing ampicillin anhydrate and ampicillin trihydrate by thermogravimetry, oven heating, differential scanning calorimetry, and X-ray diffraction techniques
202
Analysis of a mixture containing ampicillin anhydrate and ampicillin trihydrate by thermogravimetry, oven heating, differential scanning calorimetry, and X-ray diffraction techniques Original Research Article
203
Analysis of a mode-I crack perpendicular to an imperfect interface
204
Analysis of a model for pH-sensitive hydrogels
205
Analysis of a model for the dynamics of prions II ✩
206
Analysis of a model for the pathogenesis of AIDS
207
Analysis of a model of membrane potential for a skin receptor
208
Analysis of a Model Predator-Prey System with Refuges
209
ANALYSIS OF A MODIFIED LOGISTIC MODEL FOR DESCRIBING THE GROWTH OF DURABLE CUSTOMER GOODS IN CHINA
210
Analysis of a modified microbond test for the measurement of interfacial shear strength of an aqueous-based adhesive and a polyamide fibre
211
Analysis of a modified Schrِdinger operator in 2D: Regularity, index, and FEM
212
Analysis of a modified two-lane lattice model by considering the density difference effect
213
Analysis of a Modular Housing Production System Using Simulation
214
ANALYSIS OF A MOLECULAR DYNAMICS SIMULATION OF THE ACETYLCHOLINESTERASE ENZYME AND ITS COMPLEX WITH (AXILLARIDINE-A) INHIBITOR
215
Analysis of a molecular structured population model with possible polynomial growth for the cell division cycle
216
Analysis of a molten carbonate fuel cell: cogeneration to produce electricity and cold water
217
Analysis of a molten carbonate fuel cell: Numerical modeling and experimental validation
218
Analysis of a Monod–Haldene type food chain chemostat with periodically varying substrate
219
Analysis of a monsoon flood event in an ephemeral tributary and its downstream hydrologic effects
220
Analysis of a Monte Carlo boundary propagation method
221
Analysis of a monthly auction for financial transmission rights and flow-gate rights
222
Analysis of a moving crack in a functionally graded strip between two homogeneous layers
223
Analysis of a moving crack in a functionally graded strip between two homogeneous layers
224
Analysis of a Multicomponent Smoking Cessation Project: What Worked and Why
225
Analysis of a multi-frequency electromagnetic imaging functional for thin, crack-like electromagnetic inclusions
226
Analysis of a multigrid method for a transport equation by numerical Fourier analysis
227
Analysis of a Multiple Delays Model for Treatment of Cancer with Oncolytic Virotherapy
228
Analysis of a Multiple M/M/1/DV Queueing System with a Dual-Threshold Policy, Vacation Interruption and a Waiting Server
229
Analysis of a multirate theta-method for stiff ODEs
230
Analysis of a multiresonant forward converter based on nonideal coupling of the transformer
231
Analysis of a multi-server queueing model with MAP arrivals of regular customers and phase type arrivals of special customers
232
Analysis of a multi-server retrial queue with search of customers from the orbit
233
Analysis of a multistate control problem related to food technology
234
Analysis of a multivariate model for detecting browsing pressure by goats in the arid zone of Northern Chile. Application to Bridgesia incisifolia (Bert. ex Cambess) shrublands
235
Analysis of a municipal wastewater treatment plant using a neural network-based pattern analysis
236
Analysis of a Musa spp. somaclonal variant resistant to yellow Sigatoka
237
Analysis of a MV XLPE Cable Termination Design with Embedded Electr
238
Analysis of a national sample of animal drugs in commercial feed in an attempt to statistically determine the causes of poor assay recovery
239
Analysis of a natural resources management system in the Calakmul Biosphere Reserve
240
Analysis of a negative impedance converter as a temperature compensator for bridge sensors
241
Analysis of a Network of First-Order Chemical Reactions Using the Modified RCWApproach
242
ANALYSIS OF A NEUTRONIC COMPUTATIONAL MODEL FOR BOILING WATER REACTOR ASSEMBLY USING MCNP CODE
243
Analysis of a Neutronic Experiment on a Simulated Mercury Spallation Neutron Target Assembly Bombarded by Giga-Electron-Volt Protons
244
Analysis of a new algorithm for continuous-time robust adaptive control
245
Analysis of a new analytical law of heat release rate (HRR) for homogenous charge compression ignition (HCCI) combustion mode versus analytical parameters
246
Analysis of a new chaotic system
247
Analysis of a new design of a multi-stage flash–mechanical vapor compression desalination process Original Research Article
248
Analysis of a new geomorphological inventory of landslides in Valles Marineris, Mars
249
Analysis of a new high resolution upwind compact scheme
250
Analysis of a new high-efficiency DC-to-AC inverter
251
Analysis of a new hypoplastic equation
252
Analysis of a new Kolgan-type scheme motivated by the shallow water equations
253
Analysis of a New Linear Dual Stator Consequent Pole Halbach Array Flux Reversal Machine
254
Analysis of a new methodology applied to the desorption of natural gas in activated carbon vessels
255
Analysis of a New MPI Process Distribution for the Weather Research and Forecasting (WRF) Model
256
Analysis of a New Quasi Parallel Resonant DC Link (QPRDCLI)
257
Analysis of a new relationship between monthly global irradiation and sunshine hours from a database of Brazil
258
Analysis of a new specimen for mixed mode fracture tests on brittle materials
259
Analysis of a new stabilized finite element method for the reaction–convection–diffusion equations with a large reaction coefficient
260
Analysis of a new stabilized higher order finite element method for advection–diffusion equations Original Research Article
261
Analysis of a new variational model for multiplicative noise removal
262
Analysis of a newsvendor which has errors in inventory data records
263
Analysis of a nonautonomous model for migratory birds with saturation incidence rate
264
Analysis of a nonautonomous Nicholson Blowfly model
265
Analysis of a non-labeling protein array on biotin modified gold surfaces using atomic force microscopy and surface plasmon resonance
266
Analysis of a nonlinear degenerating PDE system for phase transitions in thermoviscoelastic materials
267
Analysis of a nonlinear fluid–structure interaction problem in velocity–displacement formulation Original Research Article
268
ANALYSIS OF A NONLINEAR FOURTH ORDER DIFFERENTIAL EQUATION
269
ANALYSIS OF A NONLINEAR FOURTH ORDER DIFFERENTIAL EQUATION
270
Analysis of a nonlinear optical response of CN− ions adsorbed on metal electrode: tentative interpretation by means of ab initio molecular calculations Original Research Article
271
Analysis of a nonlinear oscillator with discontinuity
272
Analysis of a non-linear structure by considering two non-linear formulations
273
Analysis of a nonoverlapping domain decomposition method for elliptic partial differential equations
274
Analysis of a nonparametric blind equalizer for discrete-valued signals
275
Analysis of a nonpreemptive priority queue with exponential timer and server vacations
276
Analysis of a nonpreemptive priority queue with SPP arrivals of high class
277
Analysis of a non-volumetric gas-condensate reservoir using a generalized material balance equation with fluid properties from an equation of state
278
Analysis of a normalized QR filter using Bayesian description of propagated data
279
Analysis of a novel absorption refrigeration cycle using centrifugal separation
280
Analysis of a novel autonomous marine hybrid power generation/energy storage system with a high-voltage direct current link
281
Analysis of a novel class of predictive microbial growth models and application to coculture growth
282
Analysis of a novel expanded tip wire (ETW) antenna for microwave ablation of cardiac arrhythmias
283
Analysis of a Novel Flux-Weakening Structure of High-Speed Permanent-Magnet Motors Based on Soft-Magnetic Ferrite Original Research Article
284
Analysis of a novel four-level DC/DC boost converter
285
Analysis of a novel gravity driven organic Rankine cycle for small-scale cogeneration applications
286
Analysis of a novel MEMS-based design of micro-direct methanol fuel cell
287
Analysis of a novel metal hydride cycle for simultaneous heating and cooling
288
Analysis of a novel method of current sharing in a resistive lightning protection terminal
289
Analysis of a novel refrigeration Carnot-type cycle based on isothermal vapour compression
290
Analysis of a novel reverse-flow reactor concept for autothermal methane steam reforming
291
Analysis of a novel solar energy-powered Rankine cycle for combined power and heat generation using supercritical carbon dioxide
292
Analysis of a novel solid state voltage regulator for a self-excited induction generator
293
Analysis of a nuclear pumped lasing mechanism for application to nuclear radiation measurements
294
Analysis of a nuclear pumped lasing mechanism for application to nuclear radiation measurements
295
Analysis of a number and type of publications that editors publish in their own journals: case study of scholarly journals in Croatia
296
Analysis of a one-dimensional random walk with irreversible losses at each step: applications for protein movement on DNA
297
Analysis of a PAH-degrading bacterial population in subsurface sediments on the Mid-Atlantic Ridge
298
Analysis of a parabolic compressible first-order slip Reynolds equation with discontinuous coefficients Original Research Article
299
Analysis of a parabolic cross-diffusion population model without self-diffusion
300
Analysis of a parallel double glass solar still with separate condenser
301
Analysis of a parallel volume rendering system based on the shear-warp factorization
302
Analysis of a passive vapor feed direct methanol fuel cell
303
Analysis of a PEMFC durability test under low humidity conditions and stack behaviour modelling using experimental design techniques
304
Analysis of a peptide hormone mixture of therapeutic interest by liquid chromatography coupled to high-flow pneumatically assisted electrospray mass spectrometry
305
Analysis of a perforated panel for the correction of low frequency resonances in medium size rooms
306
Analysis of a periodic bacteria-immunity model with delayed quorum sensing
307
Analysis of a permeable interface crack in elastic dielectric/piezoelectric bimaterials
308
Analysis of a phosphorylcholine-based polymer coating on a coronary stent pre- and post-implantation
309
Analysis of a photochemical water splitting reactor with supramolecular catalysts and a proton exchange membrane
310
Analysis of a Piezo Electric Driver Circuit for Use in a Fabry-Perot Interferometer
311
Analysis of a piezoelectric finite wedge under antiplane concentrated loads
312
Analysis of a piezoelectric finite wedge under antiplane concentrated loads
313
ANALYSIS OF A PIEZOELECTRIC MULTIMORPH IN EXTENSIONAL AND FLEXURAL MOTIONS
314
Analysis of a piezoelectric screw dislocation in the interphase layer between a circular inclusion and an unbounded matrix
315
Analysis of a piwi-Related Gene Implicates Small RNAs in Genome Rearrangement in Tetrahymena
316
Analysis of a platform for thermal management studies of microelectronics cooling methods
317
Analysis of a polyphase synchronous reluctance motor with two identical stator windings
318
Analysis of a Population Model with Space-dependent Recruitment in Continuous Time
319
Analysis of a possible future degradation in the DORIS geodetic results related to changes in the satellite constellation Original Research Article
320
Analysis of a possible root cause and mechanism for Soma mine disaster
321
Analysis of a power oscillation damping scheme using a voltage-source inverter
322
Analysis of a precision agriculture approach to cotton production
323
Analysis of a preconditioned GMRES solver for a nonsymmetric SUPG discretization of the compressible Navier-Stokes equations
324
Analysis of a predator–prey model with Holling II functional response concerning impulsive control strategy
325
Analysis of a predator–prey model with modified Holling–Tanner functional response and time delay
326
Analysis of a predator–prey model with modified Leslie–Gower and Holling-type II schemes with stochastic perturbation
327
Analysis of a predator–prey model with modified Leslie–Gower and Holling-type II schemes with time delay
328
Analysis of a preferential action of α-amylase from B. licheniformis towards amorphous regions of waxy maize starch
329
Analysis of a Preimplantation Genetic Test for Aneuploidies in Embryos from Colombian Couples: A Report of Cases
330
Analysis of a pressure disturbance in a homogeneous magnetic field Original Research Article
331
Analysis of a pressurized solid oxide fuel cell–gas turbine hybrid power system with cathode gas recirculation
332
Analysis of a probabilistic model of redundancy in unsupervised information extraction Original Research Article
333
Analysis of a process for curing composites by the use of embedded resistive heating elements
334
Analysis of a production/inventory system with randomly failing production unit submitted to regular preventive maintenance
335
Analysis of a production–inventory system with machine breakdowns and shutdowns
336
Analysis of a propagating crack in functionally graded materials with property variation angled to crack direction
337
Analysis of a Proper Strategy for Solar Energy Deployment in Iran using SWOT Matrix
338
Analysis of a pulsating fatigue process on carbon steel with different carbide shapes
339
Analysis of a PWR core baffle considering irradiation induced creep
340
Analysis of a quadratic algorithm for the angular-resolved XPS method for depth profiling
341
Analysis of a quasistatic contact problem for piezoelectric materials
342
Analysis of a quasistatic displacement-traction problem for viscoelastic materials
343
Analysis of a queueing system with a general service scheduling function, with applications to telecommunication network traffic control
344
Analysis of a racetrack microring resonator with MMI coupler
345
Analysis of a radiation attribute from uranium in storage
346
Analysis of a radiation attribute from uranium in storage
347
Analysis of a rainwater collection system for domestic water supply in Ringdansen, Norrköping, Sweden
348
Analysis of a random-access protocol under long-range-dependent traffic
349
Analysis of a randomized rendezvous algorithm
350
Analysis of a rapid supercritical extraction aerogel fabrication process: Prediction of thermodynamic conditions during processing
351
Analysis of a rate-dependent cohesive model for dynamic crack propagation
352
Analysis of a reactive extraction process for biodiesel production using a lipase immobilized on magnetic nanostructures
353
Analysis of a Reduced Model of Cortiocotroph Action Potentials
354
Analysis of a refrigeration cycle driven by refrigerant steam turbine
355
Analysis of a reheat gas turbine cycle with chemical recuperation using Aspen
356
Analysis of a remarkable perpendicular band in KrH2O with origin close to the ν1 + ν3 R(0) line in H2O
357
Analysis of a renormalization group method and normal form theory for perturbed ordinary differential equations
358
Analysis of a repowering proposal to the power generation system of a steel mill plant through the exergetic cost method
359
Analysis of a reputation system for Mobile Ad-Hoc Networks with liars
360
Analysis of a retrial queuing model with MAP arrivals and two types of customers
361
Analysis of a retrogressive landslide in glaciolacustrine varved clay
362
Analysis of a rigid footing lying on three-layered soil using the finite difference method
363
Analysis of a rotation-free 4-node shell element
364
Analysis of a rubber cone tensioned by a concentrated force
365
Analysis of a rule-based curriculum plan optimization system with Spearman rank correlation
366
Analysis of a safety barrier connection joint post-testing
367
Analysis of a salinity induced BjSOS3 protein from Brassica indicate it to be structurally and functionally related to its ortholog from Arabidopsis
368
Analysis of a sandwich-type generator with self-heating thermoelectric elements
369
Analysis of a Scale-Similarity Model of the Motion of Large Eddies in Turbulent Flows1
370
Analysis of a Schnute postulate-based unified growth model for model selection in evolutionary computations
371
Analysis of a screw dislocation inside an elliptical inhomogeneity in piezoelectric solids
372
Analysis of a screw dislocation inside an inhomogeneity with interface stress
373
Analysis of a Second-Order Sliding-Mode Algorithm in Presence of Input Delays .
374
Analysis of a Secreted Aspartic Peptidase Disruption Mutant of Glomerella cingulata
375
Analysis of a self -switched mode-locking -cut Nd : GdV O4 /KTP green laser
376
Analysis of a semidiscrete discontinuous Galerkin scheme for compressible miscible displacement problem
377
Analysis of a sequence of energetic ion and magnetic field events upstream from the Saturnian magnetosphere
378
Analysis of a severe pollution episode in Valencia (Spain) and its effect on ground level particulate matter
379
Analysis of a severe prolonged regional haze episode in the Yangtze River Delta, China
380
Analysis of a shared-memory multiprocessor via a novel queuing model
381
Analysis of a shared-memory multiprocessor via a novel queuing model
382
Analysis of a shield design for a DT neutron generator test facility
383
Analysis of a short-circuit ring impact problem and design of a new ventilator for a 625 kVA generator, using SVL Original Research Article
384
Analysis of a shrink-fit failure on a gear hub/shaft assembly
385
Analysis of a signal during bistable flow events in Laguna Verde Nuclear Power Station with wavelets techniques Original Research Article
386
Analysis of a Signorini problem with friction
387
Analysis of a single cover FRP flat plate collector for treating tannery effluent
388
Analysis of a single nucleotide polymorphism in codon 388 of the FGFR4 gene in malignant gliomas
389
Analysis of a Single Server Queue with Working Vacation and Vacation Interruption
390
Analysis of a single-effect mechanical vapor compression desalination system using water injected twin screw compressors Original Research Article
391
Analysis of a Single-Phase Grid-Tied Photovoltaic Inverter for Enhanced Performance Using TLBO-HHOA Regulated FOTDAF Controller
392
Analysis of a single-server retrial queue with quasi-random input and nonpreemptive priority
393
Analysis of a single-stage, single-product, stochastic, MRP-controlled assembly system
394
Analysis of a SIS epidemic model with stage structure and a delay
395
Analysis of a small wind-hydrogen stand-alone hybrid energy system
396
Analysis of a SOFC energy generation system fuelled with biomass reformate
397
Analysis of a soft-switched PFC boost converter using analog and digital control circuits
398
Analysis of a solar assisted heat pump system for indoor swimming pool water and space heating
399
Analysis of a solar desalination unit with humidification–dehumidification cycle using DoE method Original Research Article
400
Analysis of a solar dish–Stirling system with hybridization and thermal storage
401
Analysis of a solar-powered membrane distillation system Original Research Article
402
Analysis of a solid avascular tumor growth model with time delays in proliferation process
403
Analysis of a solid state wave gyroscope with thin shell cylindrical resonator and calculation of its conversion factor
404
Analysis of a solute polarity parameter in reversed-phase liquid chromatography on a linear solvation relationship basis
405
Analysis of a solute polarity parameter in reversed-phase liquid chromatography on a linear solvation relationship basis Original Research Article
406
Analysis of a Spanish energy scenario with Generation IV nuclear reactors
407
Analysis of a spatially extended nonlinear SEIS epidemic model with distinct incidence for exposed and infectives
408
Analysis of a splitting method for incompressible inviscid rotational flow problems
409
Analysis of a stabilized finite element approximation of the Oseen equations using orthogonal subscales Original Research Article
410
Analysis of a stabilized finite element method for fluid flows through a porous interface
411
Analysis of a stable halogenated derivative of muramic acid by gas chromatography–negative ion chemical ionization tandem mass spectrometry
412
Analysis of a stand-alone permanent-magnet synchronous generator using a time-stepping coupled field-circuit method
413
Analysis of a static pricing scheme for priority services
414
Analysis of a static transfer switch with respect to transfer time
415
Analysis of a station-keeping maneuver strategy for collocation of three geostationary satellites
416
Analysis of a stochastic autonomous mutualism model
417
Analysis of a stochastic backscatter model for the large-eddy simulation of wall-bounded flow
418
Analysis of a stochastic food chain model with finite delay
419
Analysis of a stochastic neuronal model with excitatory inputs and state-dependent effects
420
Analysis of a stochastic SIR epidemic on a random network incorporating household structure
421
Analysis of a storage ring combined-function magnet: trajectory calculation and alignment procedure
422
Analysis of a storage ring combined-function magnet: trajectory calculation and alignment procedure
423
Analysis of a structural-aerodynamic fully-coupled formulation for aeroelastic response of rotorcraft
424
Analysis of a subinterface crack in piezoelectric bimaterials with the extended finite element method
425
Analysis of a survey of 36 French research committees on intracytoplasmic sperm injection
426
Analysis of a swimmerʹs hand and arm in steady flow conditions using computational fluid dynamics
427
Analysis of a symbiotic thermoelectric system for power generation and liquid preheating
428
Analysis of a symplectic difference scheme for a coupled nonlinear Schrِdinger system
429
Analysis of a synchronization station for the performance evaluation of a kanban system with a general arrival process of demands
430
Analysis of a synchronous reluctance machine with an auxiliary single-phase winding
431
Analysis of a system for remote, dry removal of solidified mixed waste
432
Analysis of a system of fractional differential equations
433
Analysis of a system of nonautonomous fractional differential equations involving Caputo derivatives
434
Analysis of a TB model with treatment interruptions
435
Analysis of a Teaching Approach Aiming at Eliminating Student Difficulties with Radian
436
Analysis of a technical-grade w/o-microemulsion and its application for the precipitation of calcium carbonate nanoparticles
437
Analysis of a temperature-dependent model for adhesive contact with friction
438
Analysis of a Thaumasia Planum rift through automatic mapping and strain characterization of normal faults
439
Analysis of a Theoretical Model Based on Similarity for Studying RNA Base Pairings
440
Analysis of a thermal energy storage system for air cooling–heating application through cylindrical tube
441
Analysis of a thermal scene using computer simulations
442
Analysis of a thermophilic lignocellulose degrading microbial consortium and multi-species lignocellulolytic enzyme system
443
Analysis of a thermoviscoelastic model in large strain
444
Analysis of a third-order absorbing boundary condition for the Schrödinger equation discretized in space Original Research Article
445
Analysis of a Three Age Group Preys with Control Measures of COVID-19 Spread in the Third Prey
446
Analysis of a Three Species Eco-Epidemiological Model1
447
Analysis of a tilting pad journal bearing to avoid pad fluttering
448
Analysis of a time-dependent scheduling problem by signatures of deterioration rate sequences Original Research Article
449
Analysis of a time-domain finite element method for 3-D Maxwell’s equations in dispersive media Original Research Article
450
Analysis of a time-limited polling system
451
Analysis of a toluene stripping process: a comparison between a microfabricated stripping column and a conventional packed tower
452
Analysis of a topology control paradigm in WLAN/WPAN environments
453
Analysis of a topside ionospheric model using GPS and ionosonde observables Original Research Article
454
Analysis of a torque equilibrium model and the optimal strip working sequence for a shearing-cut and bending progressive die
455
Analysis of a tragic accident on a summer toboggan run
456
Analysis of a transient heat transfer experiment in a two pass internal coolant passage
457
Analysis of a transversely isotropic rod containing a single cylindrical inclusion with axisymmetric eigenstrains
458
Analysis of a two-alternative force-choice signal detection theory model
459
Analysis of a two-component hydrograph separation model to predict herbicide runoff in drained soils
460
Analysis of a two-dimensional invariant line interface for the case of a general transformation strain and application to thin-film interfaces Original Research Article
461
Analysis of a two-layered network by means of the power-series algorithm
462
Analysis of a two-level software rejuvenation policy
463
Analysis of a two-phase field model for the solidification of an alloy
464
Analysis of a two-phase queueing system with a fixed-size batch policy
465
Analysis of a two-port flanged coaxial holder for shielding effectiveness and dielectric measurements of thin films and thin materials
466
Analysis of a two-relay system configuration with application to Coulomb friction identification
467
Analysis of a two-stage finite buffer flow controlled queueing model by a compensation method
468
Analysis of a two-stage membrane reactor integrated with porous membrane having Knudsen diffusion characteristics for the thermal decomposition of hydrogen sulfide
469
Analysis of a two-stage telecommunication supply chain with technology dependent demand
470
Analysis of a Two-Storage System for Advance Payment Policies with the Partial Backlogged Shortage
471
Analysis of a type of nonsmooth dynamical systems
472
Analysis of a typical railway turnout sleeper system using grillage beam analogy
473
Analysis of A Uniform Bernoulli – Euler Beam on Winkler Foundation Subjected to Harmonic moving load
474
Analysis of a unit hydrograph model based on watershed geomorphology represented as a cascade of reservoirs
475
Analysis of a Urinary Biomarker Hydroxyproline for Clinical Assessment in Osteoporosis Patients
476
Analysis of a variable speed vapor compression system using artificial neural networks
477
Analysis of a variable time-step discretization for the Penrose–Fife phase relaxation problem Original Research Article
478
Analysis of a variational multiscale method for Large–Eddy simulation and its application to homogeneous isotropic turbulence
479
Analysis of a vehicle crankshaft failure
480
Analysis of a vehicle wheel shaft failure
481
Analysis of a velocity–pressure–pseudostress formulation for the stationary Stokes equations
482
Analysis of a versatile batch-service queueing model with correlation in the arrival process
483
Analysis of a versatile multi-class delay-loss system with a superimposed Markovian arrival process
484
Analysis of a viral infection model with immune impairment and cure rate
485
Analysis of a viscoelastic contact problem with multivalued normal compliance and unilateral constraint
486
Analysis of a viscoelastic spring–mass model
487
Analysis of a weakly non-linear autonomous oscillator by means of the field method
488
Analysis of a wedge impression test for measuring the interface toughness between films/coatings and ductile substrates Original Research Article
489
Analysis of a weld failure of a rolled Zn-alloy strip – A case study
490
ANALYSIS OF A WIDE SPECTRAL RANGE PLASMONIC OUTLINE BOWTIE ANTENNA RANGING IN 0.3-5.0 μm
491
Analysis of a wind farmʹs revenue in the British and Spanish markets
492
Analysis of a wire–duct electrostatic precipitator under dust loading conditions
493
Analysis of a wooden pellet-fueled domestic thermoelectric cogeneration system
494
Analysis of a yearly multi-round, multi-period, multi-product transmission rights auction
495
Analysis of abamectin residues in avocados by high-performance liquid chromatography with fluorescence detection
496
Analysis of abietic acid and dehydroabietic acid in food samples by in-tube solid-phase microextraction coupled with liquid chromatography–mass spectrometry
497
Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel
498
Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel
499
Analysis of abnormal grain growth of oriented LiCoO2 prepared by slip casting in a strong magnetic field
500
Analysis of Abnormal Modes of Hoisting DC Electric Drive System
501
Analysis of abnormal operation procedures in sequences of loss of the RHRS at midloop operation
502
Analysis of abnormal phenomena caused by synchronous rectifiers in a paralleled converter system
503
Analysis of abrasion mechanism of grinding media in a planetary mill with DEM simulation
504
Analysis of abrasive wear performance of arc welded hard layers
505
Analysis of absorbed dose distribution in head phantom in boron neutron capture therapy
506
Analysis of absorbed dose distribution in head phantom in boron neutron capture therapy
507
Analysis of Absorber and Buffer Layer Band Gap Grading on CIGS Thin Film Solar Cell Performance Using SCAPS
508
Analysis of absorption and reflection mechanisms in a three-dimensional plate silencer
509
Analysis of absorption spectra of purple bacterial reaction centers in the near infrared region by higher order derivative spectroscopy Original Research Article
510
Analysis of AC electrical properties of (Li and Ti)-doped NiO
511
Analysis of AC electrical properties of nanocrystalline nickel oxide
512
Analysis of AC electrical properties of nanocrystalline nickel oxide
513
Analysis of AC loss in superconducting power devices calculated from short sample data
514
Analysis of academic research performance from publications in the field of Computer Science
515
Analysis of accelerated gossip algorithms
516
Analysis of acceleration strategies for restarted minimal residual methods
517
Analysis of Accident Data and Evaluation of Leading Causes forTraffic Accidents in Jordan
518
Analysis of accident inequality of the Spanish fishing fleet
519
Analysis of Accidents in Nine Iranian Gas Refineries: 2007–2011
520
Analysis of accidents leading to local flow stagnation in parallel fuel channels of RBMK-type reactors
521
Analysis of accounting models for the detection of duplicate requests in web services
522
Analysis of Accumulation Patterns of Barley yellow dwarf virus-PAV (BYDV-PAV) in Two Resistant Wheat Lines
523
Analysis of accumulation, extractability, and metabolization of five different phenylarsenic compounds in plants by ion chromatography with mass spectrometric detection and by atomic emission spectroscopy Original Research Article
524
Analysis of Accuracy Metric of Machine Learning Algorithms in Predicting Heart Disease
525
Analysis of accuracy of a finite volume scheme for diffusion equations on distorted meshes
526
Analysis of Accuracy of Interpolation Methods in Estimating the Output Factors for Square Fields in Medical Linear Accelerator
527
Analysis of acetylcholine from extracellular fluid in brain by in vivo microdialysis and LC–ESI-MS/MS with the stable isotope-labeled internal standard
528
Analysis of acetylene in blood and urine using cryogenic gas chromatography–mass spectrometry
529
Analysis of acid rain patterns in northeastern China using a decision tree method
530
Analysis of acid returns improves efficiency of acid stimulation: a case history
531
Analysis of acid-catalyzed dehydration of formic acid in hot compressed water based on density functional theory
532
Analysis of acidic carbohydrates as their quaternary ammonium or phosphonium salts by matrix-assisted laser desorption/ionization mass spectrometry Original Research Article
533
Analysis of acidic drugs in the effluents of sewage treatment plants using liquid chromatography–electrospray ionization tandem mass spectrometry
534
Analysis of acidic pesticides using in situ derivatization with alkylchloroformate and solid-phase microextraction (SPME) for GC–MS
535
Analysis of acidic sites in Nafion-H and Nafion-H/silica gel nanocomposites by laser-induced fluorescence spectra of quinoline adsorbed on the surface
536
Analysis of acidity production during enhanced reductive dechlorination using a simplified reactive transport model
537
Analysis of acoustic channels with a time-evolving sinusoidal surface
538
Analysis of acoustic characteristics according to design parameter of diaphragm
539
Analysis of Acoustic Emission energy release during static fatigue tests at intermediate temperatures on Ceramic Matrix Composites: Towards rupture time prediction
540
Analysis of Acoustic Emission Signals in Machining
541
Analysis of Acoustic Emission Signals in Machining
542
Analysis of acoustic emission signature during aluminous cement setting to characterise the mechanical behaviour of the hard material
543
Analysis of acoustic networks including cavities by means of a linear finite volume method
544
Analysis of acoustic noise in MRI
545
Analysis of Acoustic Surface Waveguide for AE Monitoring of Concrete Beams
546
Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates
547
Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates
548
Analysis of acousto-ultrasonic characteristics for contact-type transducers coupled to composite laminated plates
549
Analysis of acquisition patterns: A theoretical and empirical evaluation of alternative methods
550
Analysis of acrylamide in coffee and dietary exposure to acrylamide from coffee
551
Analysis of acrylamide in coffee and dietary exposure to acrylamide from coffee Original Research Article
552
Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry
553
Analysis of acrylamide in different foodstuffs using liquid chromatography–tandem mass spectrometry and gas chromatography–tandem mass spectrometry Original Research Article
554
Analysis of acrylamide in food by isotope-dilution liquid chromatography coupled with electrospray ionization tandem mass spectrometry
555
Analysis of acrylamide in food products by in-line preconcentration capillary zone electrophoresis
556
Analysis of acrylamide in food samples by capillary zone electrophoresis
557
Analysis of actinomycin D treated cattle oocytes and their use for somatic cell nuclear transfer
558
Analysis of activated slip systems in fatigue nickel polycrystals using the EBSD-technique in the scanning electron microscope
559
Analysis of activated slip systems in fatigue nickel polycrystals using the EBSD-technique in the scanning electron microscope
560
Analysis of activated sludge process using multivariate statistical tools—a PCA approach
561
Analysis of activation in anterior cingulate cortex during cognitive process of selection following somatosensory stimuli: fMRI study with elaborate task paradigms
562
Analysis of active and passive magnetic field reduction systems (MFRS) of the ITER NBI
563
Analysis of Active and Reactive Power Control of a Stand-Alone PEM Fuel Cell Power Plant.
564
Analysis of active chemical species generated by electrolysis using non-aqueous capillary electrophoresis: Detection of the anion radical and the divalent anion of tetracyanoquinodimethane
565
Analysis of active damping in composite laminate cylindrical shells of revolution with skewed PVDF sensors/actuators
566
Analysis of active filter behaviour by means of modified z-transform method
567
Analysis of active islanding detection methods for grid-connected microinverters for renewable energy processing
568
Analysis of active pixel sensor readout circuit
569
Analysis of Active Queue Management Algorithms & Their Implementation for TCP/IP Networks Using OPNET Simulation Tool
570
Analysis of Active SFCL by Design of Control Strategies for Fault Detection and PWM Converter and Protection Coordination with Distance Relay
571
Analysis of active sites and heterogeneity in commercial reversed-phase octadecylsilanated silica with numerically calculated sorption distributions
572
Analysis of activity duration using the Puget sound transportation panel
573
Analysis of actuator delay compensation methods for real-time testing
574
Analysis of acute coronary ischemia–time insensitive predictive instrument (ACI-TIPI) as a clinical prediction rule in emergency department chest pain protocol patients undergoing stress testing
575
Analysis of adaptation in anteroposterior dynamics of human postural control
576
Analysis of adaptive cost functions for dynamic update policies for QoS routing in hierarchical networks
577
Analysis of adaptive detection of moderately fluctuating radar targets in target multiplicity environments
578
Analysis of adaptive filters using normalized signed regressor LMS algorithm
579
Analysis of adaptive GBN schemes in a Gilbert–Elliott channel and optimisation of system parameters
580
Analysis of adaptive plate structures by mixed layerwise finite elements
581
Analysis of adaptive shell structures using a refined laminated model
582
Analysis of adaptive-network-based fuzzy inference system (ANFIS) to estimate buoyancy-induced flow field in partially heated triangular enclosures
583
Analysis of added mass in cavitating flow
584
Analysis of additives in dairy products by liquid chromatography coupled to quadrupole-orbitrap mass spectrometry
585
Analysis of adenosine phosphates in HepG-2 cell by a HPLC–ESI-MS system with porous graphitic carbon as stationary phase
586
Analysis of adenovirus gene transfer into adult neural stem cells
587
Analysis of ADEOS/POLDER data over land surfaces Original Research Article
588
Analysis of Adequacy of 25-Hydroxi vitamin D3 Supplementation in Patients on Hemodialysis and Parathormone, Calcium and Phosphorus Level in the Blood of These Patients
589
Analysis of adhering organic residues of two “coupes-à-socles” from the Neolithic funerary site “La Hougue Bie” in Jersey: evidences of birch bark tar utilisation
590
Analysis of adhesion behavior of waste combustion ash at high temperatures and its control by the addition of coarse particles
591
Analysis of adhesion under wet conditions for three-dimensional contact considering surface roughness
592
Analysis of adhesive behaviour of human skin in vivo by an indentation test
593
Analysis of adhesive bonded joints: a unified approach
594
Analysis of adhesive joints in corrugated board under shear loading
595
Analysis of adhesive joints used to bond FRP laminates to steel members – A numerical and experimental study
596
Analysis of adhesive properties of B2 hardmetal surface
597
Analysis of adhesive-bonded single-lap joint with an interfacial crack and a void
598
Analysis of adhesively bonded joints with gaps subjected to bending
599
Analysis of adhesively bonded joints: a finite element method and a material model with damage
600
Analysis of adhesively bonded repairs in composites: Damage detection and prognosis
601
Analysis of adiabatic heating and its influence on the Garofalo equation parameters of a high nitrogen steel
602
Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
603
Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy
604
Analysis of adiabatic shear bands in elasto-thermo-viscoplastic materials by modified smoothed-particle hydrodynamics (MSPH) method
605
Analysis of adjacent-band interference between Earth stations and Earth-orbiting satellites
606
Analysis of adjuvant effects and their interactions with variable application parameters
607
Analysis of Adomian decomposition applied to a third-order ordinary differential equation from thin film flow Original Research Article
608
Analysis of adopting an integrated decision making trial and evaluation laboratory on a technology acceptance model
609
Analysis of adsorbed proteins by static time-of-flight secondary ion mass spectrometry
610
Analysis of adsorpti n of azo dye onto NiAl-CO₃ using Box-Behnken design approach and desirability function
611
Analysis of adsorption equilibrium of hydrogen on graphene sheets
612
Analysis of adsorption of phospholipids at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy: A study of the effect of the saturated alkyl chain
613
Analysis of adsorption of reactive azo dye onto CuCl2 doped polyaniline using Box–Behnken design approach
614
Analysis of adsorption properties of N719 dye molecules on nanoporous TiO2 surface for dye-sensitized solar cell
615
Analysis of advanced gas foil bearings with piecewise linear elastic supports
616
Analysis of advanced glycation endproducts in dairy products by isotope dilution liquid chromatography–electrospray tandem mass spectrometry. The particular case of carboxymethyllysine
617
Analysis of adverse drug reactions using drug and drug target interactions and graph-based methods
618
Analysis of adverse events in titration studies
619
ANALYSIS OF ADVERSE EVENTS REPORTED FOLLOWING SINGLE DOSE MONOVALENT H1N1 (SWINE FLU) VACCINE
620
Analysis of Adverse Reactions of Blood Transfusion and Discus-sion of Influencing Factors in Linyi Area from 2013 To 2020
621
Analysis of advertising lifetime for mobile phone
622
Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology
623
Analysis of Aeolian Vibrations of Transmission Line Conductors and Extraction of Damper Optimal Placement with a Comprehensive Methodology
624
Analysis of AERODEVAP experiments with the SOPHAEROS computer code
625
Analysis of aerosol characteristics and their relationships with meteorological parameters over Anhui province in China
626
Analysis of aerosol composition at Cheju Island, Korea, using a two-bin gas-aerosol equilibrium model
627
Analysis of aerosol dependence on meteorological parameters. Field campaign at vindeby on lolland
628
Analysis of aerosol deposition in PHEBUS containment during FPT-1 experiment Original Research Article
629
Analysis of aerosol measurements from the Vindeby Experiment
630
Analysis of aerosol transport to Tahoe basina
631
Analysis of aesculin and aesculotin in Cortex fraxini by capillary zone electrophoresis
632
Analysis of AET and yield predictions under surface and buried drip irrigation systems using the Crop Model PILOTE and Hydrus-2D
633
Analysis of Aflatoxin B1 in Iranian Foods Using HPLC and a Monolithic Column and Estimation of its Dietary Intake
634
Analysis of aflatoxin M1 and M2 in commercial dairy products using high-performance liquid chromatography with a fluorescence detector
635
Analysis of aflatoxin M1 in milk and yogurt and AFM1 reduction by lactic acid bacteria used in Lebanese industry
636
Analysis of aflatoxins in herbal medicine and health functional foods
637
Analysis of aftershock sequences in South and Southeastern Spain
638
Analysis of agaritine in mushrooms and in agaritine-administered mice using liquid chromatography–tandem mass spectrometry
639
Analysis of age differences in types of errors on the Ravenʹs Advanced Progressive Matrices
640
Analysis of age of onset of accessory pathway-mediated tachycardia in men and women
641
Analysis of Age, Gender, and Refractive Error‑Related Changes of the Anterior Corneal Surface Parameters Using Oculus Keratograph Topography
642
Analysis of aged gelatin by AFlFFF-MALS: Identification of high molar mass components and their influence on solubility
643
Analysis of Aged Oil on the Cooling of Power Transformers from Computational Fluid Dynamics and Experimental Measurements
644
Analysis of aged red wine pigments by capillary zone electrophoresis
645
Analysis of age-related changes in the functional morphologies of salivary glands in mice
646
Analysis of agglomerate dispersion mechanisms of multiwalled carbon nanotubes during melt mixing in polycarbonate
647
Analysis of aggregates of human immunoglobulin G using size-exclusion chromatography, static and dynamic light scattering
648
Analysis of aggregation and dispersion states of small particles in concentrated suspension by using diffused photon density wave spectroscopy
649
Analysis of aggregation errors for the p-median problem
650
Analysis of aggregative behavior of Pseudomonas sp. 30-3 isolated from Antarctic soil
651
Analysis of aggregative behavior of Pseudomonas sp. 30-3 isolated from Antarctic soil
652
Analysis of agreement between dobutamine stress echocardiography and exercise nuclear angiography in severe aortic regurgitation
653
Analysis of Agricultural Credit and Constraints: Experience of Paksistan
654
Analysis of Agricultural Explanation Centers in the Implementation of the Agricultural Development Strategy Command Program (Konstratani)
655
ANALYSIS OF AGRICULTURAL EXTENSION SYSTEM: A DISCREPANCY BETWEEN PROVIDERS AND RECIPIENTS OF THE EXTENSION SERVICES EMPIRICAL EVIDENCE FROM NORTH-WEST PAKISTAN
656
Analysis of agricultural production instability in the Gezira scheme
657
Analysis of Agricultural Student’s Rural Entrepreneurial Intentions Based on the Extended Theory of Planned Behavior
658
Analysis of Agriculture Credit Contribution in Cotton Production of Southern Punjab, Pakistan
659
Analysis of agro industries dissolution: The case of Fars Industrial Meat Complex in Iran
660
Analysis of Agro-Chemical Inputs Use in Maize Production among Small-Scale Farmers in Iwo Local Government, Osun State, Nigeria
661
Analysis of agrochemicals by capillary electrophoresis
662
ANALYSIS OF AGROMORPHOLOGICAL DESCRIPTORS TO DIFFERENTIATE BETWEEN DUKE CHERRY (Prunus x gondouinii (Poit. & Turpin) Rehd.) AND ITS PROGENITORS: SWEET CHERRY (Prunus avium L.) AND SOUR CHERRY (Prunus cerasus L.)
663
Analysis of Ah receptor pathway activation by brominated flame retardants
664
Analysis of Ahmadinejad Government's Foreign Policy According to the Critical Theory of International Relations
665
Analysis of AIMD protocols over paths with variable delay
666
Analysis of air contrast barium enema, computed tomographic colonography, and colonoscopy: prospective comparison
667
Analysis of air injection system for drag reduction in high speed vessels using numerical simulation software ANSYS-Fluid Flow
668
Analysis of air particulates by radio isotopic X-ray fluorescence technique
669
Analysis of Air Pollutants in Surrounding of Korba District
670
Analysis of air pollution data at a mixed source location using boosted regression trees
671
Analysis of air pollution in two major Korean cities: trends, seasonal Tvariations, daily 1-hour maximum versus other hour-based concentrations, and Tstandard exceedances
672
Analysis of air quality data near roadways using a dispersion model
673
Analysis of air quality within a street canyon using statistical and dispersion modelling techniques
674
Analysis of air return alternatives for CRS-type open volumetric reciever
675
Analysis of airborne magnetic and gravity anomalies of peninsular shield, India integrated with seismic and magnetotelluric results and gravity anomalies of Madagascar, Sri Lanka and East Antarctica
676
Analysis of airborne radon in an ultra-low background experiment
677
Analysis of airborne sound insulation and impact sound pressure level provided by a single partition containing a heterogeneity
678
Analysis of airborne yeast in one winery over a period of one year
679
Analysis of airflow on an airfoil using electro-hydrodynamic actuators
680
Analysis of airflow over building arrays for assessment of urban wind environment
681
Analysis of airflow through experimental rural buildings: Sensitivity to turbulence models
682
Analysis of air-inflated, heavy, membrane tube supported at two points on an incline
683
Analysis of Al2O3 Nanostructure Using Scanning Microscopy
684
Analysis of alcohol polyethoxylates and polyethylene glycols in marine sediments
685
Analysis of aldehydes in beer by gas-diffusion microextraction: Characterization by high-performance liquid chromatography–diode-array detection–atmospheric pressure chemical ionization–mass spectrometry
686
Analysis of aldehydes in excipients used in liquid/semi-solid formulations by gas chromatography–negative chemical ionization mass spectrometry
687
Analysis of aldehydes in water by solid-phase microextraction with on-fiber derivatization
688
Analysis of aliphatic alcohol ethoxylates in terms of alkyl and ethylene oxide chain lengths by reversed-phase liquid chromatography with evaporative light scattering detection
689
Analysis of aliphatic biopolymers using thermochemolysis with tetramethylammonium hydroxide (TMAH) and gas chromatography–mass spectrometry
690
Analysis of alkali-lignin in a paper mill effluent decolourised with two Streptomyces strains by gas chromatography–mass spectrometry after cupric oxide degradation
691
Analysis of alkali-silicate glasses by electron probe analysis
692
Analysis of alkaloids in Coptis chinensis Franch by accelerated solvent extraction combined with ultra performance liquid chromatographic analysis with photodiode array and tandem mass spectrometry detections Original Research Article
693
Analysis of alkaloids in Lotus (Nelumbo nucifera Gaertn.) leaves by non-aqueous capillary electrophoresis using ultraviolet and mass spectrometric detection
694
Analysis of alkaloids in Macleaya cordata (Willd.) R. Br. using high-performance liquid chromatography with diode array detection and electrospray ionization mass spectrometry
695
Analysis of alkyl and 2–6-ringed polycyclic aromatic hydrocarbons by isotope dilution gas chromatography/mass spectrometry: Quality assurance and determination in Spanish river sediments
696
Analysis of alkyl gallates and nordihydroguaiaretic acid using plastic capillary electrophoresis – microchips Original Research Article
697
Analysis of alkyl organoiodide mixtures by high-performance liquid chromatography using electrochemical detection with a post-column photochemical reactor
698
Analysis of alkyl phosphates in petroleum samples by comprehensive two-dimensional gas chromatography with nitrogen phosphorus detection and post-column Deans switching
699
Analysis of alkylbenzene samples by comprehensive capillary liquid chromatography × capillary gas chromatography
700
Analysis of alkylphenol and bisphenol A in eggs and milk by matrix solid phase dispersion extraction and liquid chromatography with tandem mass spectrometry
701
Analysis of alkylphenol and bisphenol A in meat by accelerated solvent extraction and liquid chromatography with tandem mass spectrometry
702
Analysis of alkylxanthate collectors on sulphide minerals and flotation products by headspace analysis gas-phase infrared spectroscopy (HAGIS)
703
Analysis of All-Carbon Brick Bottom and Ceramic Cup Synthetic Hearth Bottom Original Research Article
704
Analysis of All-China Sunshine Conditions of Site Selection for Large Solar Telescopes
705
ANALYSIS OF ALLEGED CYBER ATTACKS FROM RUSSIAN FEDERATION
706
Analysis of alloy composition by X-ray fluorescence spectrometry using liquid and thin layer techniques with an internal standard
707
Analysis of alloy composition by X-ray fluorescence spectrometry using liquid and thin layer techniques with an internal standard
708
Analysis of alloys by prompt gamma-ray neutron activation
709
Analysis of alloys by prompt gamma-ray neutron activation
710
Analysis of all-zero binomial outcomes with borderline and equilibrium priors
711
Analysis of along track scanning radiometer-2 (ATSR-2) data for clouds, glint and sea surface temperature using neural networks
712
Analysis of alpha-cluster transfer in 16O + 12C and 12C + 16O at energies near Coulomb barrier
713
Analysis of alpha-emitting isotopes in an inorganic scintillator
714
Analysis of alpha-emitting isotopes in an inorganic scintillator
715
Analysis of Alterations in Morphologic Characteristics of Mesenchymal Stem Cells by Mechanical Stimulation during Differentiation into Smooth Muscle Cells
716
Analysis of altered gait cycle duration in amyotrophic lateral sclerosis based on nonparametric probability density function estimation
717
Analysis of alternative flow sheets for the hybrid chlorine cycle
718
Analysis of alternative measurement strategies for the inverse optimization of the hydraulic properties of a volcanic soil
719
Analysis of alternative mechanisms for RET gene activation in hereditary and sporadic Medullary Thyroid Carcinoma
720
Analysis of aluminium in serum and urine for the biomonitoring of occupational exposure
721
Analysis of aluminum alloys by resonance-enhanced laser-induced breakdown spectroscopy: How the beam profile of the ablation laser and the energy of the dye laser affect analytical performance
722
Analysis of aluminum alloys by resonance-enhanced laser-induced breakdown spectroscopy: How the beam profile of the ablation laser and the energy of the dye laser affect analytical performance
723
Analysis of aluminum plates under heating in electrical and natural gas furnaces
724
Analysis of amantadine in biological fluids using hollow fiber-based liquid–liquid–liquid microextraction followed by corona discharge ion mobility spectrometry
725
Analysis of ambient ozone and precursor monitoring data in a densely populated residential area of Kuwait
726
Analysis of ambient, precipitation-weighted, and lake sulfate concentrations in the Adirondack region of New York
727
Analysis of ambulance decentralization in an urban emergency medical service using the hypercube queueing model
728
Analysis of Ambulance Transports and Diversions Among US Emergency Departments
729
Analysis of ameloblastomas by comparative genomic hybridization and fluorescence in situ hybridization
730
Analysis of amelogenin mRNA during bovine tooth development
731
Analysis of amine contamination on silicon oxide surfaces using ToF-SIMS
732
Analysis of amines in plant materials
733
Analysis of amino acid composition in proteins of animal tissues and foods as pre-column o-phthaldialdehyde derivatives by HPLC with fluorescence detection
734
Analysis of Amino Acid Substitution Mutations of gyrA and parC Genes in Clonal Lineage of Klebsiella pneumoniae Conferring High-level Quinolone Resistance
735
Analysis of amino acids and biogenic amines in biological tissues as their o-phthalaldehyde/ethanethiol/fluorenylmethyl chloroformate derivatives by high-performance liquid chromatography: A deproteinization study
736
Analysis of amino acids and biogenic amines in breast cancer cells by capillary electrophoresis using polymer solutions containing sodium dodecyl sulfate
737
Analysis of amino acids and carbohydrates in the cortex of nine clones of Theobroma cacao L. in relation to their susceptibility to Phytophthora megakarya Bra. and Grif
738
Analysis of amino acids by miniaturised isotachophoresis
739
Analysis of amino acids in complex samples by using voltammetry and multivariate calibration methods
740
Analysis of amino acids in complex samples by using voltammetry and multivariate calibration methods Original Research Article
741
Analysis of amino acids in human serum by isocratic reversed-phase high-performance liquid chromatography with electrochemical detection
742
Analysis of Amino Acids in the β7–β8 Loop of Human Immunodeficiency Virus Type 1 Reverse Transcriptase for their Role in Virus Replication
743
Analysis of amino acids in tobacco by derivatization and dispersive liquid–liquid microextraction based on solidification of floating organic droplet method
744
Analysis of amino acid–water interactions by partitioning in aqueous two-phase systems. I—Amino acids with non-polar side-chains
745
Analysis of amino-acid sequences by statistical technique
746
Analysis of aminofluorescein–fatty acid derivatives by capillary electrophoresis with laser-induced fluorescence detection at the attomole level: application to mycobacterial fatty acids
747
Analysis of aminoglycoside residues in bovine milk by liquid chromatography electrospray ion trap mass spectrometry after derivatization with phenyl isocyanate
748
Analysis of Amiralmu’minin (As)’S Method in Correcting Beliefs and Behaviors
749
Analysis of ammonia and aerosol concentrations and deposition near the free troposphere at Mt. Mitchell, NC, U.S.A.
750
Analysis of ammonia and aliphatic amines in environmental water by micellar electrokinetic chromatography and QSPR modeling of electrophoretic migration time
751
Analysis of ammonia and methylamines in natural waters by flow injection gas diffusion coupled to ion chromatography
752
Analysis of ammonia variation in the urban atmosphere
753
Analysis of ammonia, ammonium aerosols and acid gases in the atmosphere at a commercial hog farm in eastern North Carolina, USA
754
Analysis of ammonia/water and ammonia/salt mixture absorption cycles for refrigeration purposes in fishing ships
755
Analysis of amode III crack problem in a functionally graded coating-substrate system with finite thickness
756
Analysis of amorphous-nanocrystalline silicon thin films by time-of-flight elastic recoil detection analysis and high-resolution electron microscopy
757
Analysis of amoxicillin in human urine by photo-activated generation of fluorescence excitation–emission matrices and artificial neural networks combined with residual bilinearization Original Research Article
758
Analysis of amphetamine and methamphetamine as emerging pollutants in wastewater and wastewater-impacted streams
759
Analysis of amphetamines and metabolites in urine with ultra performance liquid chromatography tandem mass spectrometry
760
Analysis of amphetamine-type stimulants and their metabolites in plasma, urine and bile by liquid chromatography with a strong cation-exchange column-tandem mass spectrometry
761
Analysis of amplitude and slope diffraction coeficients
762
Analysis of amprolium by hydrophilic interaction liquid chromatography–tandem mass spectrometry
763
Analysis of Amygdala Nucleus in the Rat Brain: A review study
764
Analysis of an accelerated carbonation test with severe preconditioning
765
Analysis of an actively twisted rotor by multibody global modeling
766
Analysis of an actual reactor trip operating event due to a high variation of neutron flux occurring in the Vandellòs-II nuclear power plant Review Article
767
Analysis of an adaptive algorithm for unbiased multipath time delay estimation
768
Analysis of an adaptive time-series autoregressive moving-average (ARMA) model for short-term load forecasting
769
Analysis of an adenine nucleotide-containing metabolite of clodronate using ion pair high-performance liquid chromatography–electrospray ionisation mass spectrometry
770
Analysis of an adhesively bonded single lap joint subjected to eccentric loading
771
Analysis of an adhesively bonded single-strap joint integrated with shape memory alloy (SMA) reinforced layers
772
Analysis of an administrative database of half a million restorations over 11 years
773
Analysis of an administrative database of indirect restorations over 11 years
774
Analysis of an administrative database of indirect restorations over 11 years
775
Analysis of an ADS spurious opening event at a BWR/6 by means of the TRACE code
776
Analysis of an Advanced Test Reactor Small-Break Loss-of-Coolant Accident with an Engineered Safety Feature to Automatically Trip the Primary Coolant Pumps
777
Analysis of an affine version of the Heston–Hull–White option pricing partial differential equation
778
Analysis of an age structured SIR epidemic model with fractional Caputo derivative
779
Analysis of an age-dependent SIS epidemic model with vertical transmission and proportionate mixing assumption
780
Analysis of an agent-based metric-driven method for ad-hoc, on-demand routing
781
Analysis of an age-structured predator–prey model with disease in the prey
782
Analysis of an air cycle refrigerator driving air conditioning system integrated desiccant system
783
Analysis of an algebraic Petrov–Galerkin smoothed aggregation multigrid method Original Research Article
784
Analysis of an algorithm for computing invariant measures Original Research Article
785
Analysis of an ampicillin propyl ester prodrug which inhibits the growth of Escherichia coli
786
Analysis of an Anisotropic Finite Wedge under Antiplane Deformation
787
Analysis of an annular finned pyrolyser
788
Analysis of an annular finned pyrolyser-II
789
Analysis of an anomalously severe thunderstorm system over Northern Ireland
790
Analysis of an Arabidopsis thaliana protein family, structurally related to cytochromes b 561 and potentially involved in catecholamine biochemistry in plants
791
Analysis of an asymmetric polling system
792
Analysis of an Asymmetrical Bridle Towline Model to Stabilise Towing Performance of a Towed Ship
793
Analysis of an augmented fully-mixed approach for the coupling of quasi-Newtonian fluids and porous media
794
Analysis of an automatic energy recovery system for partially spent batteries
795
Analysis of an axisymmetric deep-drawn part forming using reduced forming steps
796
Analysis of an early measurement of the speed of sound propagation in the atmosphere
797
Analysis of an eddy current problem involving a thin inductor Original Research Article
798
Analysis of an Egyptian study on the socioeconomic distribution of depressive symptoms among undergraduates
799
Analysis of an ejector with environment friendly refrigerants
800
Analysis of an elastic ring tourniquet (ERT) using the theory of a Cosserat curve and finite elements
801
Analysis of an electricity–cooling cogeneration system based on RC–ARS combined cycle aboard ship
802
Analysis of an elliptic–parabolic free boundary problem modelling the growth of non-necrotic tumor cord
803
Analysis of an energy efficient building design through data mining approach
804
Analysis of an energy recovery system for reformate-based PEM fuel cells involving a binary two-phase mixture
805
Analysis of an epidemic model with density-dependent birth rate, birth pulses
806
Analysis of an equivalent tool face for the cutting speed range prediction of complex grooved tools
807
Analysis of an Exact Fractional Step Method
808
Analysis of an explicit and matrix free fractional step method for incompressible flows Original Research Article
809
Analysis of an extremely dense regional fog event in Eastern China using a mesoscale model
810
Analysis of an ex-vessel break in the ITER divertor cooling loop
811
Analysis of an FEL oscillator at zero detuning length of an optical cavity
812
Analysis of an FEL oscillator at zero detuning length of an optical cavity
813
Analysis of an HIV/AIDS treatment model with a nonlinear incidence
814
Analysis of an H-Shaped Patch Antenna by Using the FDTD Method
815
Analysis of an illustrative interaction between structural features and earthworm populations in Brazilian ferralsols
816
Analysis of an immersed boundary method for three-dimensional flows in vorticity formulation
817
Analysis of an impact damper of vibrations
818
Analysis of an impact Duffing oscillator by means of a nonsmooth unfolding transformation
819
Analysis of an impedance function of zinc anodic dissolution
820
Analysis of an implicit fully discrete local discontinuous Galerkin method for the time-fractional Schrِdinger equation
821
Analysis of an improved aqua-ammonia absorption refrigeration cycle employing evaporator blowdown to provide rectifier reflux
822
ANALYSIS OF AN INCLINED SEMI-CIRCULAR SLOT IN THE NARROW WALL OF A RECTANGULAR WAVEGUIDE
823
Analysis of an industrial component commonality problem
824
Analysis of an industrial continuous slurry reactor for ethylene–butene copolymerization
825
Analysis of an industrial piping installation under buckling propagation
826
Analysis of an infinite shape memory alloy plate with a circular hole subjected to biaxial tension
827
Analysis of an information monitoring and diagnostic system to improve building operations
828
Analysis of an initially stressed hybrid plate based on a higher-order theory
829
Analysis of an initially stressed laminated plate based on elasticity theory
830
Analysis of an innovative water desalination system using low-grade solar heat Original Research Article
831
Analysis of an in-service rupture of the inner first wall of tore supra
832
Analysis of an integrated model for assessing land and water policy options Original Research Article
833
Analysis of an interface crack between two dissimilar piezoelectric solids
834
Analysis of an interface relaxation method for composite elliptic differential equations
835
Analysis of an interfacial crack in a piezoelectric bi-material via the extended Green’s functions and displacement discontinuity method
836
Analysis of an internal crack of pressure pipeline using ESPI and shearography
837
Analysis of an international air-cargo hub: the case of Hong Kong
838
Analysis of an International Emergency Medical Service Train-the-Trainer Program, , ,
839
Analysis of an inverse method of simultaneous determination of thermal conductivity and heat of phase transformation in steels
840
Analysis of an irreversible Ericsson engine with a realistic regenerator
841
Analysis of an irrigation district in northeastern Spain: I. Characterisation and water use assessment
842
Analysis of an irrigation district in northeastern Spain: I. Characterisation and water use assessment
843
Analysis of an irrigation district in northeastern Spain: II. Irrigation evaluation, simulation and scheduling
844
Analysis of an irrigation district in northeastern Spain: II. Irrigation evaluation, simulation and scheduling
845
Analysis of an isotropic finite wedge under antiplane deformation
846
Analysis of an Iterative Difference Equation Model of the Cardiac Cell Membrane
847
Analysis of an LMS algorithm for unbiased impulse response estimation
848
ANALYSIS OF AN M (λ1,λ2) / M / WV QUEUE WITH CONTROLLED VACATION INTERRUPTION AND VARIABLE ARRIVAL RATE
849
Analysis of an M/G/1 queue with constant repeated attempts and server vacations
850
Analysis of an M/G/1 Queue with Multiple Vacations, N-policy, Unreliable Service Station and Repair Facility Failures
851
Analysis of an M/G/∞ queue with batch arrivals and batch-dedicated servers
852
Analysis of an M^[X]/(G1,G2)/1 retrial queueing system with balking, optional re-service under modified vacation policy and service interruption
853
Analysis of an MMPP/G/1/K queue with queue length dependent arrival rates, and its application to preventive congestion control in telecommunication networks
854
Analysis of an observed relationship between colloid collision efficiency and mean collector grain size
855
Analysis of an open tandem queueing network with population constraint and constant service times 1
856
Analysis of an open-air swimming pool solar heating system by using an experimentally validated TRNSYS model
857
Analysis of an optimal control problem for the tridomain model in cardiac electrophysiology
858
Analysis of an optimal control problem for the three-dimensional coupled modified Navier–Stokes and Maxwell equations
859
Analysis of an retrial queue
860
Analysis of an RFID Authentication Protocol in Accordance with EPC Standards
861
Analysis of an RO plant to remedy the water shortage in the rural area of damascus Original Research Article
862
Analysis of an RPV upper head SBLOCA at the ROSA facility using TRACE Original Research Article
863
Analysis of an SVEIR model with age-dependence vaccination, latency and relapse
864
Analysis of an ultrafiltration model: Influence of operational conditions Original Research Article
865
Analysis of an uncommon coating defect on industrial galvannealed high strength interstitial free steel
866
Analysis of an unmitigated quench in a poloidal field coil of ITER
867
Analysis of an unusual behavior of the hydrogen evolution reaction: two Tafelian regions with equal slope
868
Analysis of an unusual crankshaft failure
869
Analysis of an unusual McPherson suspension failure
870
Analysis of an updraft biomass gasifier with high temperature steam using a numerical model
871
Analysis of an upflow bioreactor system for nitrogen removal via autotrophic nitrification and denitrification
872
Analysis of an urban energy metabolic system: Comparison of simple and complex model results
873
Analysis of an urban energy metabolic system: Comparison of simple and complex model results
874
Analysis of Anabaena vaginicola and Nostoc calcicola from Northern Iran, as rich sources of major carotenoids
875
Analysis of anabolic steroids by partial filling micellar electrokinetic capillary chromatography and electrospray mass spectrometry
876
Analysis of anabolic steroids in urine by gas chromatography–microchip atmospheric pressure photoionization-mass spectrometry with chlorobenzene as dopant
877
Analysis of anaerobic blood cultures in burned patients
878
Analysis of anaerobic BTX biodegradation in a subarctic aquifer using isotopes and benzylsuccinates
879
Analysis of anaerobic sludge containing heavy metals: A novel technique
880
Analysis of anatoxin-a in aqueous samples by solid-phase microextraction coupled to high-performance liquid chromatography with fluorescence detection and on-fiber derivatization
881
Analysis of anatoxin-a in biological samples using liquid chromatography with fluorescence detection after solid phase extraction and solid phase microextraction
882
Analysis of anatoxin-a using polyaniline as a sorbent in solid-phase microextraction coupled to gas chromatography–mass spectrometry
883
Analysis of anchor bolt pullout in concrete by the element-free Galerkin method
884
Analysis of ancient and medieval specimens using nondestructive spectroscopic techniques
885
Analysis of ancient and medieval specimens using nondestructive spectroscopic techniques
886
Analysis of ancient mortars and design of compatible repair mortars: The case study of Odeion of the archaeological site of Dion
887
Analysis of anesthesia chief resident competencies in anesthesia crisis management simulation
888
Analysis of Angle Stability Problems: A Transmission Protection Systems Perspective
889
Analysis of angle-dependent unusual transmission in lossy single-negative (SNG) materials
890
Analysis of angular distortion in line-heating
891
Analysis of angular distortion in line-heating
892
Analysis of angular spectrum of radiation in an undulator magnet
893
Analysis of angular spectrum of radiation in an undulator magnet
894
Analysis of anion adsorption effects on alumina nanoparticles stability
895
Analysis of anionic metallized azo and formazan dyes by capillary electrophoresis–mass spectrometry
896
Analysis of Anionic Polymer Dispersant Behavior in Dense Silicon Nitride and Carbide Suspensions Using an AFM
897
Analysis of anions and cations in drinking water samples by Capillary Ion Analysis
898
Analysis of anions in hydrofluoro ethers by ion chromatography
899
Analysis of anisoles in wines using pervaporation coupled to gas chromatography–mass spectrometry
900
Analysis of anisotropic flow with Lee–Yang zeroes Original Research Article
901
Analysis of anisotropic in-plane corners
902
Analysis of anisotropic Mindlin plate model by continuous and non-continuous GFEM
903
Analysis of anisotropic plate using multiquadric radial basis function
904
Analysis of anisotropic sector with a radial crack under anti-plane shear loading
905
Analysis of Anisotropic Side-chain Packing in Proteins and Application to High-resolution Structure Prediction
906
Analysis of anisotropic tunnel magneto-resistance of (Ga,Mn)As/AlAs/(Ga,Mn)As magnetic tunnel junction
907
Analysis of anisotropic viscoelastoplastic properties of cortical bone tissues
908
Analysis of anisotropy and strain rate sensitivity of open-cell metal foam
909
Analysis of anisotropy of cosmic rays with the energy of about 1017 eV by Yakutsk EAS array data
910
Analysis of anisotropy of numerical wave solutions by high accuracy finite difference methods
911
Analysis of annealing effect on pervaporation properties of PVA-GPTMS hybrid membranes through PALS
912
Analysis of annealing processes of glass sheets based on structural relaxation model
913
Analysis of annealing processes of glass sheets based on structural relaxation model
914
Analysis of annual and spatial patterns of CZCS-derived pigment concentration on the continental shelf of China
915
Analysis of annual fluctuations of C. nodosa in the Venice lagoon: Modeling approach
916
Analysis of annual fluctuations of C. nodosa in the Venice lagoon: Modeling approach
917
Analysis of annual heating and cooling energy requirements for office buildings in different climates in Turkey
918
Analysis of anodic current transient and beam deflection transient simultaneously measured from Pd foil electrode pre-charged with hydrogen
919
Analysis of anomalous current–voltage characteristics of silicon solar cells
920
Analysis of Antarctic glaciations by seismic reflection and refraction tomography
921
Analysis of Antenatal Sonographic Features of the Fetuses with Trisomy 21
922
Analysis of anthocyanin pigments in Lonicera (Caerulea) extracts using chromatographic fractionation followed by microcolumn liquid chromatography-mass spectrometry
923
Analysis of anthocyanins in foods by liquid chromatography, liquid chromatography–mass spectrometry and capillary electrophoresis
924
Analysis of Anthocyanins in Plasma for Determination of their Bioavailability
925
Analysis of anthocyanins in powdered berry extracts by planar chromatography linked with bioassay and mass spectrometry
926
Analysis of anthocyanins in strawberries and elderberries. A comparison of capillary zone electrophoresis and HPLC
927
Analysis of anthraquinoid and indigoid dyes used in ancient artistic works by thermally assisted hydrolysis and methylation in the presence of tetramethylammonium hydroxide
928
Analysis of anthraquinones in Rubia tinctorum L. by liquid chromatography coupled with diode-array UV and mass spectrometric detection
929
Analysis of anthraquinones in Rumex crispus by micellar electrokinetic chromatography
930
Analysis of anthropogenic and climate change effects on Mesopotamian marshland- Iraq
931
Analysis of anthropogenic CO2 signal in ICARTT using a regional chemical transport model and observed tracers
932
Analysis of antibacterial and antibiofilm activity of purified recombinant Azurin from Pseudomonas aeruginosa
933
ANALYSIS OF ANTIBACTERIAL AND ANTIFUNGAL ACTIVITY OF CRUDE EXTRACTS FROM SEEDS OF CORIANDRUM SATIVUM
934
Analysis of antibiotic residues in liquid manure and leachate of dairy farms in Northern Germany
935
Analysis of Antibiotic Resistance and Antimicrobial Effects of Enterococcus faecium and Lactococcus lactis Isolated from Khorramabad Traditional Cheeses
936
Analysis of antibiotic resistance patterns and detection of mecA gene in Staphylococcus aureus isolated from packaged hamburger
937
ANALYSIS OF ANTIBIOTIC RESISTANT GENES IN BACTERIA
938
Analysis of Antibiotic Susceptibility Profile and RAPD Typing of Listeria Monocytogenes Isolates
939
Analysis of antibiotics from liquid sample using electrospray ionization-ion mobility spectrometry Original Research Article
940
Analysis of antibiotics in urine and wipe samples from environmental and biological monitoring—Comparison of HPLC with UV-, single MS- and tandem MS-detection
941
Analysis of Antibody Induction by Macrophages Treated Ex Vivo with Human Proteins in Mice
942
Analysis of antibody-independent binding of dengue viruses and dengue virus envelope protein to human myelomonocytic cells and B lymphocytes
943
Analysis of anticancer drugs: A review
944
Analysis of anticoagulant rodenticide residues in Microtus arvalis tissues by liquid chromatography with diode array, fluorescence and mass spectrometry detection
945
Analysis of anti-condensation mechanism on superhydrophobic anodic aluminum oxide surface
946
Analysis of antifouling biocides Irgarol 1051 and Sea Nine 211 in environmental water samples using solid-phase microextraction and gas chromatography
947
Analysis of Antigenic and Conformational Changes in Hepatitis B Surface Antigen (HBsAg) Identified in Iranian Patients with Chronic Hepatitis B
948
Analysis of antimicrobial agents in pig feed by liquid chromatography coupled to orbitrap mass spectrometry
949
Analysis of antimicrobial resistance among gram-negative bacilli and antimicrobial use in intensive care unit patients for 5 years in a veterans affairs medical center
950
Analysis of Antioxidant Activity and Texture Profile of Tender-Young and King Coconut (Cocos nucifera) Mesocarps under Different Treatments and the Possibility to Develop a Food Product
951
Analysis of antioxidant enzyme activity during germination of alfalfa under salt and drought stresses
952
Analysis of antioxidants by microchip capillary electrophoresis with chemiluminescence detection based on luminol reaction
953
Analysis of antioxidants using a capillary electrophoresis with chemiluminescence detection system
954
Analysis of antioxidants using a capillary electrophoresis with chemiluminescence detection system Original Research Article
955
Analysis of anti-PDE3 activity of 2-morpholinochromone derivatives reveals multiple mechanisms of anti-platelet activity
956
Analysis of Anti-Prolamin Monoclonal Antibody Reactivity Using Prolamin Fractions Purified by Preparative Electrophoresis
957
Analysis of Antiresonant Reflecting Optical Waveguide Gratings by Use of the Method of Lines
958
Analysis of anti-vibration gloves mechanism and evaluation methods
959
Analysis of AntNet routing scheme by using queueing model
960
Analysis of Anxiety Scale and Related Elements in Endodontic Patients
961
Analysis of AODV and DSDV Routing Protocol in MANET
962
Analysis of Aperture Antennas above Lossy Half-Space
963
Analysis of apolipoprotein A-I, lecithin:cholesterol acyltransferase and glucocerebrosidase genes in hypoalphalipoproteinemia
964
Analysis of apolipoprotein E genetic variation in patients with Alzheimer disease referred to Imam Reza Clinic, Rasht, Iran, in 2015
965
Analysis of apoplastic and symplastic antioxidant system in shallot leaves: Impacts of weak static electric and magnetic field
966
Analysis of Apoptosis in Cultured Human Vitrified Ovarian Tissue in the Presence of Leukemia Inhibitory Factor
967
Analysis of apples varieties – comparison of electronic tongue with different analytical techniques
968
Analysis of apples varieties – comparison of electronic tongue with different analytical techniques
969
Analysis of Application of Principles of Justice in Arbitration
970
Analysis of application of standard operating procedure in the management of the archives pt. pln (persero) rayon medan baru
971
Analysis of applying different solvents for the mobile phase and for sample injection
972
Analysis of Applying Roman Jakobson Theory to Bahiyeh Afnan Shahid English Translation of Sepehri’s Eight Books
973
Analysis of approximate algorithms for edge-coloring bipartite graphs
974
Analysis of approximate factorization in iteration methods Original Research Article
975
Analysis of approximation algorithms for single-machine scheduling with delivery times and sequence independent batch setup times
976
Analysis of approximation of continuous fuzzy functions by multivariate fuzzy polynomials
977
Analysis of approximations for multinormal integration in system reliability computation
978
Analysis of approximations of dual control
979
Analysis of aqueous pyrethroid residuals by one-step microwave-assisted headspace solid-phase microextraction and gas chromatography with electron capture detection
980
Analysis of aquifer mineralization by paleodrainage channels
981
Analysis of arabic gum: Study of degradation and water desorption processes
982
Analysis of Arabidopsis amino acid metabolism in response to Heterodera schachtii infection
983
Analysis of arbitrary composite sections in biaxial bending and axial load
984
Analysis of Arch Dams Using Coupled Trial Load and Block Element Methods
985
Analysis of archaeal ether lipids in bovine faeces
986
Analysis of archaeological ceramics by total-reflection X-ray fluorescence: Quantitative approaches
987
Analysis of archaeological ceramics by total-reflection X-ray fluorescence: Quantitative approaches
988
Analysis of Archaeological Ceramics by TXRF and Contrasted with NAA
989
Analysis of archaeological samples and local clays using ICP-AES, TG–DTG and FTIR techniques
990
Analysis of architectsʹ demotivating factors in design firms
991
Analysis of ARDS in major burn patients
992
Analysis of area-congestion-based DDoS attacks in ad hoc networks
993
Analysis of arm elevation muscle activity through different movement planes and speeds during in-water and dry-land exercise
994
Analysis of Arm Movement Prediction by Using the Electroencephalography Signal
995
Analysis of aromatase (CYP19) gene in Iranian women with endometriosis
996
Analysis of Aromatic Aldehydes in Brandy and Wine by High-Performance Capillary Electrophoresis
997
Analysis of aromatic amines by high-performance liquid chromatography with pre-column derivatization by 2-(9-carbazole)-ethyl-chloroformate Original Research Article
998
Analysis of aromatic amines in water samples by liquid–liquid–liquid microextraction with hollow fibers and high-performance liquid chromatography
999
Analysis of aromatic compounds in gasoline with flow-switching comprehensive two-dimensional gas chromatography
1000
Analysis of arsenic and calcium in soil samples by laser ablation mass spectrometry Original Research Article
