<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Developing safe route planning strategies in young child pedestrians
2
Developing safety-critical real-time systems with SDL design patterns and components
3
Developing scalable protocols for three-metric QoS routing
4
Developing Scenario-based Serious Games forComplex Cognitive Skills Acquisition: Design, Development and Evaluation of the EMERGO Platform
5
Developing scenarios and visualisations to illustrate potential policy and climatic influences on future agricultural landscapes
6
Developing scenarios to assess sunflower and soybean yield under different sowing dates and water regimes in the Bekaa valley (Lebanon): Simulations with Aquacrop
7
Developing scheduling systems for Daewoo Shipbuilding: DAS project
8
Developing science activities through a networked peer assessment system
9
DEVELOPING SCIENCE TEACHERSʹ NATURE OF SCIENCE VIEWS: THE EFFECT OF IN-SERVICE TEACHER EDUCATION PROGRAM
10
Developing Screening Risk Evaluation Criteria for Facility Siting Vapor Cloud Explosion Hazards
11
Developing Screening Risk Evaluation Criteria for Facility Siting Vapor Cloud Explosion Hazards
12
DEVELOPING SEISMIC FRAGILITY FUNCTION OF STRUCTURES BY STOCHASTIC APPROACH
13
Developing Self-adaptive Melody Search Algorithm for Optimal Operation of Multi-reservoir Systems
14
Developing self-management education in coronary artery disease
15
Developing Self-Regulated Learners: Goal Setting, Self-Evaluation, and Organizational Signals During Acquisition of Procedural Skills
16
Developing Semantic Model of Privacy in Architecture based on Logical Reasoning Method
17
Developing SFNN models to predict financial distress of construction companies
18
Developing sharedlearning in multiprofessional health care education: for whose benefit?
19
Developing similarity based IPA under intuitionistic fuzzy sets to assess leisure bikeways
20
Developing simulation based optimization mechanism for a novel stochastic reliability centered maintenance problem
21
Developing Singapore Driving Cycle for passenger cars to estimate fuel consumption and vehicular emissions
22
Developing site-Specific immobilization strategies of peptides in a microarray
23
Developing skills in rhinoplasty through cadaver training
24
Developing slip-flow and heat transfer in trapezoidal microchannels
25
Developing SNOMED-CT for decision making and data gathering: a software prototype for low back pain.
26
Developing Social Accountability Indicators at Medical Schools
27
Developing socio-spatial knowledge networks: : a qualitative methodology for chronic disease prevention
28
Developing software for generating pouring schedules for steel foundries
29
Developing software for parallel computing systems Original Research Article
30
Developing solar cells with recycled materials and household chemicals for drinking water chlorination by communities with limited resources
31
Developing some functional group chemistry at the Group 4 bent metallocene frameworks
32
Developing sorting models using preference disaggregation analysis: An experimental investigation
33
DEVELOPING SPATIAL DATA INFRASTRUCTURE FOR E-GOVERNMENT SERVICES
34
Developing spatial models of sugar kelp (Saccharina latissima) potential distribution under natural conditions and areas of its disappearance in Skagerrak
35
Developing Special Badminton Agility Test and Evaluating Its Convergence with Standardized Agility Tests in Trained Young Men
36
Developing Sports Diplomacy Paradigm of Foreign Policy in Iran
37
Developing SSU rDNA metagenomic profiles of aquatic microbial communities for environmental assessments
38
Developing stable optical fiber refractometers using PMDI with two-parallel Fabry–Perots
39
Developing stable, low impedance interface between metallic lithium anode and polyacrylonitrile-based polymer gel electrolyte by preliminary voltage cycling
40
Developing staff schedules for a bilingual telecommunication call center with flexible workers
41
Developing stakeholder understanding, technical capability, and responsibility: The New Bedford Harbor Superfund Forum
42
Developing Standardised Accounting Information System (AIS) Course for Iraqi Higher Education: A Conceptual Framework
43
Developing Standards for Library Services in Pakistan: A Critique of Professional Efforts
44
Developing standards of professional performance in public relations
45
Developing Statistical Process Control to Monitor the Values Education Process
46
Developing strategic and reasoning abilities with computer games at primary school level
47
Developing strategic measurement and improvement for the biopharmaceutical firm: Using the BSC hierarchy
48
Developing strategic perspectives on business process reengineering: From process reconfiguration to organizational change
49
Developing strategic plans for academic general internal medicine
50
Developing strategic self-descriptions of SMEs
51
Developing strategic supplier networks: An institutional perspective
52
Developing Strategies and Designing its Map for Advancement of Medical Tourism Industry: Case Study of Shiraz
53
Developing strategies for automated remote plant production systems: Environmental control and monitoring of the Arthur Clarke Mars Greenhouse in the Canadian High Arctic Original Research Article
54
Developing strategies for isolation of minor impurities with mass spectrometry-directed fractionation
55
Developing strategies for overcoming barriers to knowledge sharing based on conversational knowledge management: A case study of a financial company
56
Developing Strategies for Spatially Variable Nitrogen Application in Cereals, Part I: Winter Barley
57
Developing Strategies for Spatially Variable Nitrogen Application in Cereals, Part II: Wheat
58
Developing strategies for the future of academic public hospitals
59
Developing strategies for therapeutic angiogenesis: vascular endothelial growth factor alone may not be the answer
60
Developing strategies for therapeutic angiogenesis: vascular endothelial growth factor alone may not be the answer
61
Developing strategies to promote the Iranian international film market
62
Developing structure of two-phase flow in a large diameter pipe at low liquid flow rate
63
Developing Student Collaborations across Disciplines, Distances, and Institutions
64
Developing Students’ Awareness of Plagiarism: Crisis and Opportunities
65
Developing Students’ Creative Response to Literary Texts in the ESL Classroom
66
DEVELOPING STUDENTS’ CRITICAL THINKING THROUGH AN INTEGRATED EXTENSIVE READING PROGRAM
67
Developing Students’ EFL Writing Skills by Enhancing their Oral Interactions
68
Developing Students‟ Collaboration in a Mathematics Classroom through Dramatic Activities
69
Developing sub 5-m LiDAR DEMs for forested sections of the Alpine and Hope faults, South Island, New Zealand: Implications for structural interpretations
70
Developing Subcutaneous Emphysema, Pneumothorax and Pneumomediastinum after Arthroscopic Shoulder Surgery under General Anesthesia: A Case Report
71
Developing Subject-Related Web Sites Collaboratively: The Virtual Business Information Center
72
Developing suitability maps for rainwater harvesting in South Africa
73
Developing superplastic properties in an aluminum alloy through severe plastic deformation
74
Developing superplastic properties in an aluminum alloy through severe plastic deformation
75
Developing superplasticity and a deformation mechanism map for the Zn–Al eutectoid alloy processed by high-pressure torsion
76
Developing superplasticity in a magnesium alloy through a combination of extrusion and ECAP Original Research Article
77
Developing superplasticity in a magnesium AZ31 alloy by ECAP
78
Developing supplier integration capabilities for sustainable competitive advantage: A dynamic capabilities approach
79
Developing supplier integration capabilities for sustainable competitive advantage: A dynamic capabilities approach
80
Developing supplier integration capabilities for sustainable competitive advantage: A dynamic capabilities approach
81
Developing sustainability indicators for mountain ecosystems: a study of the Cairngorms, Scotland
82
Developing sustainable building assessment scheme for Saudi Arabia: Delphi consultation approach
83
Developing Sustainable Cardiovascular Care for Low-Resource Nations
84
Developing Sustainable Cities in Arid Regions
85
Developing sustainable drainage solutions in South Gloucestershire
86
Developing sustainable drainage solutions in South Gloucestershire
87
Developing Sustainable Electricity Supplies in Rural Areas of Developing Countries
88
Developing sustainable energy policies for electrical energy conservation in Saudi Arabia
89
Developing sustainable neighbourhoods
90
Developing sustainable prehospital trauma education in Rwanda
91
Developing sustainable products and services
92
Developing sustainable residential buildings in Saudi Arabia: A case study
93
Developing sustainable tourism for world heritage sites
94
Developing sustainable urban development models
95
Developing sustainable water management scenarios by using thorough hydrologic analysis and environmental criteria
96
Developing Syllabus of Introduction to Literature for Students of English Department in Untirta
97
Developing symbolic capacity one step at a time
98
Developing Synergies in Blended e-Learning for Language in Higher Education
99
Developing system for improving the performance of the private hospital in Egypt
100
Developing tailored climate change scenarios for hydrological impact assessments
101
Developing target reliability for novel structures: the case of the Mobile Offshore Base
102
Developing Teacher Leadership for School Improvement in Pakistan: A Comparative Study
103
Developing teachers’ collective learning: Collective learning from success as perceived by three echelons in the school system
104
Developing teaching knowledge through peer discourse
105
Developing Techniques to Improve L2 Learning Motivation and Willingness to Communicate Utilizing Johari Window Model in Foreign Language Context
106
Developing techniques to study A ∼ 132 nuclei with (d, p) reactions in inverse kinematics
107
Developing technological start-up entrepreneurs: a case study of a graduate entrepreneurship programme at Swinburne University
108
Developing technologies for broad-network concurrent computing
109
Developing technologies for broad-network concurrent computing
110
Developing technology in the vicinity of science: An examination of the relationship between science intensity (of patents) and technological productivity within the field of biotechnology
111
Developing technology: The quest for a new theoretical framework for understanding the role of technology in human development
112
Developing technology: The quest for a new theoretical framework for understanding the role of technology in human development
113
Developing teeth as biomarker of dioxin exposure
114
Developing telnets negotiated options
115
Developing Temperature–Time and Pressure–Time diagrams for diffusion bonding AZ80 magnesium and AA6061 aluminium alloys
116
Developing terrestrial, multi-taxon indices of biological integrity: An example from coastal sage scrub Original Research Article
117
Developing the ‘health-promoting school’—a national survey of healthy schools awards
118
Developing the 85Kr tracer gas technique for air exchange rate measurements in naturally ventilated animal buildings
119
Developing the ability to model acid-rock interactions and mineral dissolution during the RMA stimulation test performed at the Soultz-sous-Forêts EGS site, France
120
Developing the Adult Male ICRP Phantom and Evaluation the Absorbed Dose Received By Critical Organs in Head and Neck Region during the Radiotherapy of Eye Cancer
121
Developing the Agrobacterium Ti plasmid as a vector for plant genetic engineering: the 2002 Benjamin Franklin Medal in life sciences presented to Mary-Dell Chilton
122
Developing the Audit Quality Measurement Model Using Structural Equation Modeling
123
Developing the Basic English Language Skills in Nigerian Colleges of Education: A Case Study of Three Colleges of Education
124
Developing the basis for target injection and tracking in inertial fusion energy power plants
125
Developing the brain – a proposal to pediatricians
126
Developing the Brand Equity of Football Clubs: The Partial Role of Identity Distinction, Identity Attractiveness, and Fan-Team Identification (Case Study: Iranian Premier Football League)
127
Developing the changes in attitude about the relevance of science (CARS) questionnaire and assessing two high school science classes
128
DEVELOPİNG THE CHİLD BEHAVİOUR EVALUATİON SCALE: THE VALİDİTY AND RELİABİLİTY STUDY
129
Developing the concept of adoptive cellular gene therapy of rheumatoid arthritis
130
Developing the concept of linear function: one student’s experiences with dynamic physical models
131
Developing the Concept of Sexual and Reproductive Health in Women with Type-1 Diabetes Mellitus: A Directed Content Analysis
132
Developing the Concept of Sustainability Accounting Based On the Tacit Knowledge of Managers in Iran
133
Developing the Conceptual and Methodological Framework for Discursive-institutional Analysis of Coastal Exclusive Space Production: with Special Reference to Critical Realism Perspective
134
DEVELOPING THE COST FOR UNCOMPLICATED ACUTE ST ELEVATED MYOCARDIAL INFARCTION (STEMI PRIMARY PERCUTANEOUS CORONARY INTERVENTION) USING STEP DOWN AND ACTIVITY BASED COSTING AT UKMMC
135
Developing the Cu/Sn Multilayer Composite through Accumulative Roll Bonding (ARB): Investigating the Microstructural and Mechanical Features
136
Developing the curriculum for a new Bachelorʹs degree in Engineering for Sustainable Development
137
Developing the diagnostic and statistical manual V: what will ‘‘statistical’’ mean in DSM-V?
138
Developing the dual system of wind chiller integrated with wind generator
139
Developing the effectiveness of professional audit judgment based on the mindfulness of auditors
140
DEVELOPING THE EMPLOYER BRAND OF ORGANIZATIONS IN THE INCREASINGLY CHANGING BUSINESS CLIMATE
141
Developing the Environment of Information Technology Education using Cloud Computing Infrastructure
142
DEVELOPING THE EQUIPMENT FOR STUDYING THE TECHNOLOGICAL PROCESSES IN PRODUCING INORGANIC MATERIALS IN SPACE
143
Developing the Framework of Entrepreneurship Education Ecosystem in Iranian Schools Using Soft System Methodology
144
Developing the geothermal resources map of Iran
145
Developing the Glycerol Carbonylation Process Using Photocatalysis and 2-Cyanopyridine as a Water-Reducing Agent
146
Developing the Guideline of Therapeutic Interventions for Street Children With Substance Use Disorders
147
Developing the health, safety and environment excellence instrument
148
Developing the helping skills and prosocial motivation of aggressive adolescents in peer group programs
149
Developing the heritage tourism product in multi-ethnic cities
150
Developing the home energy report: An everyday householder-centred approach
151
Developing the Hull Acid Rain Model: its validation and implications for policy makers
152
Developing the ICT Capable School
153
Developing the Identity-based Psychodrama Package and Comparing It With Psychodrama on Neuroticism
154
Developing the IFMIF RAM planning
155
Developing the index for product design communication and evaluation from emotional perspectives
156
Developing the injury prevention and safety promotion thesaurus, international English edition: An interdisciplinary tool for indexing and searching for research literature. Progress report 1
157
Developing the interaction matrix technique as a tool assessing the impact of traffic on air quality
158
Developing the Intercultural Communicative Competence of Iranian Medical ESP Students Through Explicit Instruction
159
Developing the Internet: entrepreneurship and public policy in Ireland, Singapore, Argentina, and Spain
160
Developing the interview protocol for video-recorded child sexual abuse investigations: A training experience with police officers, social workers, and clinical psychologists in Hong Kong
161
Developing the Inventory Routing Problem with Backhauls, Heterogeneous Fleet and Split Service
162
Developing the Job Description for Diabetes Nurse Specialists: A Modified Delphi Approach
163
Developing the KHANA Test to Evaluate Reading Skills in Persian-speaking Students: A Preliminary Study
164
Developing the landscape planning scenarios through the Geodesign approach: the case study of Imrahor valley
165
Developing the Learning Door: A case study in youth participatory program planning
166
DEVELOPING THE LSM VPR SCHEDULING METHOD FOR SCHEDULING HIGHWAY CONSTRUCTION PROJECTS BASED ON EFFECTIVE FACTORS ON EMBANKMENT ACTIVITY PRODUCTIVITY
167
Developing the maturity model of strategic alliances using the weighted fuzzy inference system
168
Developing the Media Zoo in Second Life
169
Developing the Model of Relationship with God and Marriage Burnout Through the Mediation of Cognitive Verbal Control
170
Developing the Moral Codes of Teachers in Islam: Synthesis Research Based on the Roberts’s Model
171
Developing the Moral Distress Scale in the Population of Iranian Nurses
172
Developing the National Health Service: a model for public services Review Article
173
Developing the New Barrier Condition Index (BCI) to Unify theBarrier Assessments - A Case Study in Wind River IndianReservation, Wyoming
174
Developing the new frontline manager
175
Developing the next LHCD source for Tore Supra
176
Developing the Noncentrality Parameter for Calculating Group Sample Sizes in Heterogeneous Analysis of Variance
177
Developing the nurse teacherʹs role: the use of multiple focus groups to ensure grassroots involvement
178
Developing the nurseʹs role in patient education: rehabilitation as a case example
179
Developing the Orang Asli human capital: A case study on the roles and determination of educational goals among Orang Asli parents in Kuantan, Pahang
180
Developing the organizationʹs sensemaking capability: Precursor to an adaptive strategic marketing response
181
Developing the Persian Version of Sensory Gating Inventory and Assessing Its Validity and Reliability
182
Developing the Persian version of the homophone meaning generation test
183
Developing the person-oriented approach: Theory and methods of analysis
184
Developing the polymer abrasive gels in AFM processs
185
Developing the prerequisites for sustainable land use in Albania
186
Developing the Principles of Parental Mental Health in the Neonatal Intensive Care Unit (NICU)
187
Developing the properties of new blue phosphors: TiO2-doped Zn2SiO4
188
Developing the public health practitioner workforce in England: Lessons from theory and practice
189
Developing the reaction kinetics for a biodiesel reactor
190
Developing the readiness to alter sun-protective behaviour questionnaire (RASP-B)
191
Developing the Recoil Distance Doppler-Shift technique towards a versatile tool for lifetime measurements of excited nuclear states
192
Developing the Recoil Distance Doppler-Shift technique towards a versatile tool for lifetime measurements of excited nuclear states
193
Developing the role of the generic healthcare support worker: phase 1 of an action research study
194
Developing the sales force, growing the business: The direct selling experience
195
Developing the Sense of Agency Rating Scale (SOARS): An empirical measure of agency disruption in hypnosis
196
Developing the Serious Games potential in nursing education
197
Developing the skills required for evidence-based practice
198
Developing the sociology of health in nurse education: towards a more critical curriculum — Part 1: andragogy and sociology in project 2000
199
Developing the sociology of health in nurse education: towards a more critical curriculum — Part 2: linking methodology and epistemology
200
Developing the Speaking Skill among ESL Elementary Learners
201
Developing the Stock Pricing Model based on Bounded Rationality Theory
202
Developing the strategic board
203
Developing the Strategic Plan for Pahlevani and Zourkanei Federation
204
Developing the Strategic Sports Marketing Plan for the Lifeguard and Diving Federation in Islamic Republic of Iran
205
Developing the Training Package of Self-Awareness based On the Logo-therapy Approach in Order to Improve the Self-Control of Adolescent Girls
206
Developing the Use of Quality Indicators in Sterilization Practices
207
Developing the Value Management Maturity Model (VM3©)
208
Developing the Whole Student: The Collegiate Ideal
209
Developing therapeutic proteins by engineering ligand–receptor interactions
210
Developing thin film composite poly(piperazine-amide) and poly(vinyl-alcohol) nanofiltration membranes Original Research Article
211
Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries
212
DEVELOPING THREE-TIRE MISCONCEPTION TEST ABOUT REGULAR CIRCULAR MOTION
213
Developing TiAlN coatings for intermediate temperature solid oxide fuel cell interconnect applications
214
Developing tools to advance our understanding of fish immunity
215
Developing topology discovery in Event-B
216
Developing Transit-oriented Strategies for Sanandaj City Center, Iran
217
Developing trans-jurisdictional tourism partnerships—insights from the Island of Ireland
218
Developing Translation Rules for Converting Relational to Object Oriented Database Conceptual Schema
219
Developing turbulent flows in rectangular channels: A parametric study
220
Developing Turbulent Heat Transfer in a 360(omicron)Bend of Square Cross Section
221
Developing Turbulent Heat Transfer in a 360(omicron)Bend of Square Cross Section
222
Developing two 4-parameter and 5-parameter exponential smoothing methods with multiplicative trend for demand forecasting
223
Developing two analytical solutions for the diffusion equation and two simple mathematical models for prediction of the gas diffusivity
224
Developing two different measures for assessing knowledge of and attitudes toward epilepsy for the Turkish population
225
Developing Two Metaheuristics to Solve Radar Signal Clustering
226
Developing typologies of consumer motives for use of technologically based banking services
227
Developing ultrasensitive pressure sensor based on graphene nanoribbon: Molecular dynamics simulation
228
Developing unconventional oil and gas resources in South Asia
229
Developing Undergraduates’ Awareness of Metacognitive Knowledge in Writing Through Problem-based Learning
230
Developing understanding of the roles of CD1d-restricted T cell subsets in cancer: Reversing tumor-induced defects
231
Developing underutilized fisheries: Oregonʹs developmental fisheries program
232
Developing uranium dicarbide–graphite porous materials for the SPES project
233
Developing Urban Family Physician Program in Shiraz, Fars Province, the Doctors’ Experiences: A Qualitative Research
234
Developing User Centric HEMS through Automated Appliance Recognition Framework
235
Developing User Interfaces: Ensuring Usability Through Product &Process : D. Hix and H.R. Hartson. John Wiley & Sons, New York (1993). xxix + 381 pp., $34.95, ISBN 0-471-57813-4
236
Developing Vaccines against FootandMouth Disease: a Biotechnological Approach
237
Developing Vegetation Health Index from biophysical variables derived using MODIS satellite data in the Trans-Gangetic plains of India
238
Developing Very Fine Nanopearlitic Structure in a High Carbon Steel Wire before Drawing
239
Developing very hard nanostructured bainitic steel
240
Developing virtual environments for industrial training
241
Developing virus-free grapevine explants by using silver-nanoparticles and its comparison with chemo and thermotherapy-based approaches
242
Developing visual systems and exposure to virtual reality and stereo displays: some concerns and speculations about the demands on accommodation and vergence
243
Developing Vocabulary Achievement through Using Different Gloss Types: Single Glossing in L1 and L2 Versus Multiple-Choice Glossing
244
Developing vocational practice in the jewellery sector through the incubation of a new “project-object”
245
developing voice in efl learners’ argumentative writing through dialogical thinking: a promising combination
246
Developing Voice in EFL Learners’ Argumentative Writing through Dialogical Thinking: A Promising Combination
247
Developing waist-to-height ratio cut-offs to define overweight and obesity in children and adolescents
248
Developing Water Quality Index to Assess the Quality of the Drinking Water
249
Developing water quality maps of a hyper-saline lake using spatial interpolation methods
250
Developing water quality standards for coastal dolphins
251
Developing Web services for C and C++
252
Developing weed-suppressive soils through improved soil quality management
253
Developing weed-suppressive soils through improved soil quality management
254
Developing whole school pedagogical values—A case of going through the ethos of “good schooling”
255
Developing Wine Tourism: An Exploratory Study of Wineries in Newfoundland
256
Developing with the worldʹs fastest 8-bit microcontroller
257
DEVELOPING WORDLESS PICTURE BOOK TO IMPROVE THE STORYTELLING ABILITY OF 5 TO 6 YEARS OLD CHILDREN
258
Developing work and quality improvement strategies: an introduction
259
Developing work schedules for an inter-city transit system with multiple driver types and fleet types
260
DEVELOPING WRITING ABILITIES OF EFL STUDENTS THROUGH BLOGGING
261
Developing WSN-based traceability system for recirculation aquaculture
262
DEVELOPING YOUNG LEARNERS’ LISTENING SKILLS THROUGH SONGS
263
developing zero waste halal tourism community in lombok
264
Developing α/β Laminar Composite Structure in CuZn Alloy by Heat Treatment and Submerged Friction Stir Processing
265
Developing, exploring, and validating a typology of private philanthropic decision making
266
Developing, Implementation and Evaluation of Patient Safety Training Program for Nurses
267
Developing, integrating, and perpetuating new ways of applying sociology to health, medicine, policy, and everyday life
268
Developing-countries cancer research
269
Developing-world research ethics
270
Development ، implementation of a real-time open-architecture control system for industrial robot systems
271
Development a case-based classifier for predicting highly cited papers
272
Development a Comprehensive Food Safety System in Serbia- A Narrative Review Article
273
Development a Conceptual Framework for Industrial and Hazardous Wastes Rating Systems
274
Development A Constructivist Module and Web on Circle and Sphere Material with Wingeom Software
275
Development a detailed inventory framework for estimating major pollutants emissions inventory for Yunnan Province, China
276
DEVELOPMENT A DEVICE FOR MEASURINGELECTROSTATIC CHARGE OF AIRBORNE PARTICLES IN LIVESTOCK HOUSING
277
Development a dislocation density based model considering the effect of stacking fault energy: Severe plastic deformation
278
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy
279
Development a Heuristic Method to Locate and Allocate the Medical Centers to Minimize the Earthquake Relief Operation Time
280
Development a hydrolysis probe-based quantitative PCR assay for the specific detection and quantification of Candida auris
281
DEVELOPMENT A MACHINE FOR PICKING CALENDULA INFLORESCENCES TO SUIT THE SMALL HOLDING FARMERS
282
Development a multi-layer perceptron artificial neural network model to estimate the Vickers hardness of Mn–Ni–Cu–Mo austempered ductile iron
283
Development a New Human Skin Continuous Cell Line Sensitive to Mumps Virus
284
Development a new method for pilot scale production of high grade oil palm plywood: Effect of hot-pressing time
285
Development a new method for pilot scale production of high grade oil palm plywood: Effect of resin content on the mechanical properties, bonding quality and formaldehyde emission of palm plywood
286
Development a new method for the determination of paromomycin in trace amounts by fast Fourier continuous cyclic voltammetry at an Au microelectrode in a flowing system
287
Development a new mutation operator to solve the Traveling Salesman Problem by aid of Genetic Algorithms
288
Development a New Technique Based on Least Square Method to Synthesize the Pattern of Equally Space Linear Arrays
289
Development a novel supramolecular solvent microextraction procedure for copper in environmental samples and its determination by microsampling flame atomic absorption spectrometry
290
Development a Predictive Finite Element Model for Investigation of Phases Behavior after Cold Rolling Process
291
Development a simple and sensitive method for determination low trace of nickel by local surface plasmon resonance of citrate capped silver nanoparticles
292
Development a Vision Based Seam Tracking System for None Destructive Testing Machines
293
Development after physical abuse in early childhood : Jane C. Gibbons. Bernard Gallagher, Caroline Bell and David Gordon. HMSO, London. 1995
294
DEVELOPMENT AGENDAS IN PUBLIC UNIVERSITIES IN MALAYSIA: SIMILARITIES AND DIFFERENCES OF ACTIONS
295
Development aid: manna or myth?
296
Development an Accessibility Approach to Rank the Transportation Network Components During the Occurrence of Flood Crisis (Golestan Province Case Study)
297
DEVELOPMENT AN INSTRUMENT TO MEASURE UNIVERSITY STUDENTS’ ATTITUDE TOWARDS E-LEARNING
298
Development and Acceptance of a Nutrition and Lifestyle Education Booklet to Improve Mild Cognitive Impairment among Elderly
299
Development and adaptation of constructive probabilistic neural network in freeway incident detection
300
Development and adoption of a new series of COSPAR International Reference Atmospheric Models
301
Development and Adoption of Dryland Cropping Technologies in Hebei Province of Northern China
302
Development and aging of primitive hematopoietic stem cells in BALB/cBy mice
303
Development and allele diversity of microsatellite markers linked to the aluminium tolerance gene Alp in barley
304
Development and allocation of land-use scenarios in agriculture for hydrological impact studies
305
Development and alpha testing of a cloud based automated fault detection and diagnosis tool for Air Handling Units
306
Development and analysis for the large-scale tee-forming process
307
Development and analysis of a 12-year daily 1-km forest fire dataset across North America from NOAA/AVHRR data
308
Development and analysis of a feedback treatment strategy for parturient paresis of cows
309
DEVELOPMENT AND ANALYSIS OF A MICROWAVE DIRECT CONTACT WATER-LOADED BOX-HORN APPLICATOR FOR THERAPEUTIC HEATING OF BIO-MEDIUM
310
Development and analysis of a multifunctional reactor for equilibrium reactions: benzene hydrogenation and methanol synthesis
311
Development and analysis of a natural gas reliquefaction plant for small gas carriers
312
Development and Analysis of a Neural Dynamical Approach to Nonlinear Programming Problems
313
Development and analysis of a non-splitting solution for three-dimensional air quality models
314
Development and Analysis of a Novel Multi-Mode MPPT Technique with Fast and Efficient Performance for PMSG-Based Wind Energy Conversion Systems
315
Development and analysis of a three phase cloudlet allocation algorithm
316
Development and analysis of air quality modeling simulations for hazardous air pollutants
317
Development and analysis of alternative dispatching methods in truckload trucking
318
Development and analysis of an adaptive transport scheme
319
Development and analysis of an integral fluidodynamic model in hollow fibre for different operational modes
320
Development and analysis of Climate Sensitivity and Climate Adaptation opportunities indices for buildings
321
Development and Analysis of Compact Lowpass Filter for UWB Systems
322
Development and analysis of cost-based dispatching rules for job shop scheduling
323
Development and analysis of design for environment oriented design parameters
324
Development and analysis of diffusion bonding techniques for LBE-cooled spallation targets
325
DEVELOPMENT AND ANALYSIS OF FLEXIBLE UHF RFID ANTENNAS FOR ``GREEN" ELECTRONICS
326
Development and analysis of friction material for eco- friendly brake pad using seashell composite
327
Development and analysis of mineral based coatings for buildings and urban structures
328
Development and analysis of novel soft-starter/energy-saver topology for delta-connected induction motors
329
Development and analysis of some versions of the fractional-order point reactor kinetics model for a nuclear reactor with slab geometry
330
DEVELOPMENT and ANALYSIS OF THE ENCRYPTION ALGORITHM IN NONPOSITIONAL POLYNOMIAL NOTATIONS
331
Development and analysis of the Original UNIFAC-CI model for prediction of vapor–liquid and solid–liquid equilibria
332
Development and analytic validation of an immunoassay for the quantification of canine S100A12 in serum and fecal samples and its biological variability in serum from healthy dogs
333
Development and analytic validation of an immunoassay for the quantification of canine S100A12 in serum and fecal samples and its biological variability in serum from healthy dogs
334
Development and analytical characterization of a Grimm-type glow discharge ion source operated with high gas flow rates and coupled to a mass spectrometer with high mass resolution
335
Development and analytical validation of a multivariate calibration method for determination of amoxicillin in suspension formulations by near infrared spectroscopy
336
Development and analytical validation of a simple multivariate calibration method using digital scanner images for sunset yellow determination in soft beverages
337
Development and analytical verification of an inelastic reinforced concrete joint model
338
Development and annealing of colloidal multilayer structures of silica microspheres
339
Development and application demonstration of a novel polymer film based transparent insulation wall heating system
340
Development and application of “The Two Image” method for accurate object recognition and color analysis Original Research Article
341
Development and application of a 1D floodplain sedimentation model for the River Rhine in The Netherlands
342
Development and application of a biological peptide pump for the study of the in vivo actions of angiotensin peptides
343
Development and application of a bioluminescence ATP assay method for rapid detection of coliform bacteria
344
Development and application of a capillary electrophoresis based method for the assessment of monosaccharide in soil using acid hydrolysis
345
Development and application of a capillary electrophoresis based method for the simultaneous screening of six antibiotics in spiked milk samples
346
Development and application of a capillary electrophoresis–electrochemiluminescent method for the analysis of enrofloxacin and its metabolite ciprofloxacin in milk
347
Development and Application of a Cement Raw Meal Controller
348
Development and application of a centrifugation-plating method to study the biodiversity of Bacillus species in rice products
349
Development and application of a comprehensive simulation model to evaluate impacts of watershed structures and irrigation water use on streamflow and groundwater: the case of Wet Walnut Creek Watershed, Kansas, USA
350
Development and application of a comprehensive soot model for 3D CFD reacting flow studies in a diesel engine
351
Development and application of a comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry method for the analysis of l-β-methylamino-alanine in human tissue
352
Development and application of a computationally efficient particulate matter apportionment algorithm in a three-dimensional chemical transport model
353
Development and application of a conceptual hydrologic model to predict soil salinity within modern Tunisian oases
354
Development and application of a crack tip opening displacement-based mixed mode fracture criterion
355
Development and application of a decision group Back-Propagation Neural Network for flood forecasting
356
Development and application of a decision support tool for reduction of product losses in the food-processing industry
357
Development and application of a detailed inventory framework for estimating nitrous oxide and methane emissions from agriculture
358
Development and application of a deterministic-realistic hybrid methodology for LOCA licensing analysis
359
Development and Application of a Direct Drive Motor for Performance Enhancement of Versatile Machine Tool Systems
360
Development and application of a distributed modeling approach to assess the watershed-scale impact of drainage water management
361
Development and application of a drought risk index for food crop yield in Eastern Sahel
362
Development and application of a dual RELAP5-3D-based engineering simulator for ABWR Original Research Article
363
Development and application of a dynamic model for hindered-settling column separations
364
Development and application of a functional CE-SSCP fingerprinting method based on [Fe–Fe]-hydrogenase genes for monitoring hydrogen-producing Clostridium in mixed cultures
365
Development and application of a generalised steady-state electrochemical model for a PEM fuel cell
366
Development and application of a GIS-based sediment budget model
367
Development and application of a glassy-winged and smoke-tree sharpshooter egg-specific predator gut content ELISA
368
Development and application of a high resolution liquid chromatographic method for the analysis of complex pigment distributions
369
Development and application of a high-performance liquid chromatography method using monolithic columns for the analysis of ecstasy tablets
370
Development and application of a high-performance liquid chromatography–mass spectrometry method to determine alendronate in human urine
371
Development and application of a human error identification tool for air traffic control
372
Development and application of a keyword-based knowledge map for effective R&D planning
373
Development and application of a laboratory flux measurement system (LFMS) for the investigation of the kinetics of mercury emissions from soils
374
Development and application of a Lagrangian model to determine the origins of ozone episodes in the UK
375
Development and application of a LC–MS/MS method to quantify basal adenosine concentration in human plasma from patients undergoing on-pump CABG surgery
376
Development and application of a liquid chromatography/tandem mass spectrometric assay for measurement of N-acetylaspartate, N-acetylaspartylglutamate and glutamate in brain slice superfusates and tissue extracts
377
Development and application of a living probabilistic safety assessment tool: Multi-objective multi-dimensional optimization of surveillance requirements in NPPs considering their ageing
378
Development and application of a loop-mediated isothermal amplification assay for rapid identification of aflatoxigenic molds and their detection in food samples
379
Development and application of a loop-mediated isothermal amplification assay on rapid and sensitive detection of rotavirus in fecal samples and artificially seeded oysters
380
Development and application of a material law for steel-fibre-reinforced concrete with regard to its use for pre-stressed concrete reactor vessels Original Research Article
381
Development and application of a mechanistic model to estimate emission of nitrous oxide from UK agriculture
382
Development and application of a method for analysis of lufenuron in wheat flour by gas chromatography–mass spectrometry and confirmation of bio-efficacy against Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae)
383
Development and application of a method for analysis of phthalates in ham sausages by solid-phase extraction and gas chromatography–mass spectrometry
384
Development and application of a method for the analysis of N-acylhomoserine lactones by solid-phase extraction and ultra high pressure liquid chromatography
385
Development and application of a method for the analysis of two trichothecenes: Deoxynivalenol and T-2 toxin in meat in China by HPLC–MS/MS
386
Development and application of a methodology for vulnerability assessment of climate change in coastal cities
387
Development and application of a micro-digestion device for elemental analysis of biological samples Original Research Article
388
Development and application of a model for robust, cost-effective investment in natural capital and ecosystem services
389
Development and application of a model for the long-term alteration of UO2 spent nuclear fuel Test of equilibrium and kinetic mass transfer models in the Cigar Lake ore deposit
390
Development and application of a modeling approach for surface water and groundwater interaction
391
Development and application of a multi channel current integrator-cum-peak classifier for online monitoring of leakage current on RTV coated insulators
392
Development and application of a multi-attribute sustainability function for Dutch dairy farming systems
393
Development and application of a multi-channel monitoring system for near real-time VOC measurement in a hazardous waste management facility
394
Development and application of a multi-criteria spatial decision support system for planning sustainable industrial areas in Northern Spain
395
Development and application of a multi-scale k–ε model for turbulent porous medium flows
396
Development and application of a multi-target immunoaffinity column for the selective extraction of natural estrogens from pregnant womenʹs urine samples by capillary electrophoresis
397
Development and application of a new air pollution modeling system — Part III. Aerosol-phase simulations
398
Development and application of a new air pollution modeling system—II. Aerosol module structure and design
399
Development and application of a new air pollution modeling system-part I: Gas-phase simulations
400
Development and application of a new on-line SPE system combined with LC–MS/MS detection for high throughput direct analysis of pharmaceutical compounds in plasma
401
Development and application of a new sensitive spectrophotometric-multivariate calibration method to the simultaneous determination of hydrazine and acetylhydrazine using silver nanoparticles
402
Development and application of a new sessile drop contact angle method to assess soil water repellency
403
Development and application of a new solid-phase microextraction fiber by sol–gel technology on titanium wire Original Research Article
404
Development and application of a nitrogen simulation model in a data scarce catchment in South China
405
Development and application of a novel swirl cyclone scrubber—(1) Experimental
406
Development and application of a PCR-based ‘molecular tool box’ for the identification of Phytophthora species damaging forests and natural ecosystems
407
Development and Application of a Phosphorus Model for a Shallow Oxbow Lake
408
Development and application of a polar coating for stir bar sorptive extraction of emerging pollutants from environmental water samples Original Research Article
409
Development and application of a portable manual non-contact-type goniometric instrument for measuring human anatomical angular parameters
410
Development and application of a possible mechanism for the generation of cis-pinic acid from the ozonolysis of α- and β-pinene
411
Development and Application of a Potentiometric Hg2+-Imprinted Polymer/graphitic Carbon Nitride/Carbon Paste Electrode
412
Development and application of a predictive model of Aspergillus candidus growth as a tool to improve shelf life of bakery products Original Research Article
413
Development and application of a protocol to evaluate impact of duct cleaning on IAQ of office buildings
414
Development and application of a pseudo-3D pit slope displacement map derived from ground-based radar
415
Development and application of a quantitative lateral flow immunoassay for fumonisins in maize Original Research Article
416
Development and application of a quantitative PCR assay targeting Catellicoccus marimammalium for assessing gull-associated fecal contamination at Lake Erie beaches Original Research Article
417
Development and application of a quantitative real-time PCR assay to detect feline leukemia virus RNA
418
Development and application of a quantitative real-time PCR assay to detect feline leukemia virus RNA
419
Development and application of a quasi-static Langmuir isotherm for modelling selected resin acid fate in pulp mill wastewater treatment
420
Development and application of a radioactivity characterization system for low-level radioactive waste
421
Development and application of a radioactivity characterization system for low-level radioactive waste
422
Development and application of a real-time PCR-based assay to enumerate total yeasts and Pichia anomala, Pichia guillermondii and Pichia kluyveri in fermented table olives
423
Development and application of a remote sensing-based salinity prediction model for a large estuarine lake in the US Gulf of Mexico coast
424
Development and application of a resazurin-based biomass activity test for activated sludge plant management
425
Development and application of a Risk Assessment Tool
426
Development and application of a Risk Assessment Tool
427
Development and application of a ruthenium(II) complex-based photoluminescent and electrochemiluminescent dual-signaling probe for nitric oxide
428
Development and application of a sediment toxicity test using the benthic cladoceran Chydorus sphaericus
429
Development and application of a selection criterion for particle size breakdown of smooth bromegrass leaves
430
Development and Application of a Self-Referencing Glucose Microsensor for the Measurement of Glucose Consumption by Pancreatic beta-Cells
431
Development and application of a shipboard method for spectrophotometric determination of trace dissolved manganese in estuarine and coastal waters
432
Development and application of a simple capillary-microreactor for oxidation of glucose with a porous gold catalyst
433
Development and application of a simple colorimetric assay reveals widespread distribution of sodium channel mutations in Thai populations of Aedes aegypti
434
Development and application of a simple hydrologic model simulation for a Brazilian headwater basin
435
Development and application of a simplified sampling method for volatile polyfluorinated alkyl substances in indoor and environmental air
436
Development and application of a simulation model for changes in land-use patterns under drought scenarios
437
Development and application of a skin cancer slope factor for exposures to benzo[a]pyrene in Soil
438
Development and application of a social accountability assessment tool at the Shahid Beheshti University of Medical Sciences
439
Development and application of a soil classification-based conceptual catchment-scale hydrological model
440
Development and application of a sol–gel immunosorbent-based method for the determination of isoproturon in surface water
441
Development and application of a sorption data base for the performance assessment of a radwaste repository
442
Development and application of a specially designed heating system for temperature-programmed high-performance liquid chromatography using subcritical water as the mobile phase
443
DEVELOPMENT AND APPLICATION OF A SPECTRAL LIGHT ABSORPTION PHOTOMETER FOR AEROSOL AND HYDROSOL SAMPLES
444
Development and application of a standardized validation procedure for food chemistry laboratories Original Research Article
445
Development and application of a stereoscopic 3-color high-speed ratio-pyrometry
446
Development and application of a storage–release based distributed hydrologic model using GIS
447
Development and application of a system for dynamic wildfire risk assessment in Italy
448
Development and application of a three-dimensional aerosol chemical transport model, PMCAMx
449
Development and application of a three-dimensional baroclinic model to the study of the seasonal circulation in the Celtic Sea
450
Development and application of a three-dimensional orthogonal coordinate semi-implicit hydrodynamic model
451
Development and application of a three-parameter RK–PR equation of state
452
Development and Application of a Validated Liquid Chromatography-Mass Spectrometry Method for the Determination of Dexchlorpheniramine Maleate in Human Plasma
453
Development and application of a validated stability-indicating HPLC method for simultaneous determination of granisetron hydrochloride, benzyl alcohol and their main degradation products in parenteral dosage forms
454
Development and Application of a Wheel Based Process Monitoring System in Grinding
455
Development and application of an advanced capacity spectrum method
456
Development and application of an analytical model to aid design and implementation of in situ remediation technologies
457
Development and application of an antibody ELISA for the marker protein of ovine pulmonary carcinoma
458
Development and application of an antibody ELISA for the marker protein of ovine pulmonary carcinoma
459
Development and application of an ecological classification tool for fish in lakes in Ireland
460
Development and application of an efficient moving sectional approach for the solution of the atmospheric aerosol condensation/evaporation equations
461
Development and application of an electrochemical biosensor based on carbon paste and silica modified with niobium oxide, alumina and DNA (SiO2/Al2O3/Nb2O5/DNA) for amitriptyline determination
462
Development and Application of an HPLC Method for Erlotinib Protein Binding Studies
463
Development and application of an image analysis method for wide bubble size distributions
464
Development and Application of an Immunocapture PCR Diagnostic Assay Based on the Monoclonal Antibody for the Detection of Shigella
465
Development and application of an improved blade element momentum method model on horizontal axis wind turbines
466
Development and Application of an Indicator for Reliable Survey of Patient Complaint Data
467
Development and application of an indoor air quality audit to an air-conditioned building in Singapore
468
Development and application of an indoor air quality audit to an air-conditioned tertiary institutional building in the tropics
469
Development and Application of an In-house Line Probe Assay for Hepatitis C Virus Genotyping
470
Development and application of an instrument to find out the linguistic background of employees in MNCs
471
DEVELOPMENT AND APPLICATION OF AN INTEGRATED MULTIDISCIPLINARY ANALYSIS CAPABILITY
472
Development and Application of an Integrated Water Balance Model to Study the Sensitivity of the Tokyo Metropolitan Area Water Availability Scenario to Climatic Changes
473
Development and application of an oil spill model with wave–current interactions in coastal areas
474
Development and application of an on-line sequential injection system for the separation of Pu, 210Po and 210Pb from environmental samples
475
Development and application of an optical TPC for charged particle track structure imaging in microdosimetry
476
Development and application of an optical TPC for charged particle track structure imaging in microdosimetry
477
Development and application of an optimization model for the maximization of net agricultural return
478
Development and application of an SPME/GC method for the determination of trace phthalates in beer using a calix[6]arene fiber Original Research Article
479
Development and application of an unconstrained technique for patient positioning in fixed radiation beams
480
Development and Application of Aqueous Two-Phase Partition for the Recovery and Separation of Recombinant Phenylalanine Dehydrogenase
481
Development and application of benthic macroinvertebrate-based multimetric indices for the assessment of streams and rivers in the Taihu Basin, China
482
Development and application of bioaccumulation models to assess persistent organic pollutant temporal trends in arctic ringed seal (Phoca hispida) populations
483
Development and application of biochemical and haematological reference intervals to identify unhealthy green sea turtles (Chelonia mydas)
484
Development and application of BioFeed model for optimization of herbaceous biomass feedstock production
485
Development and Application of Blast Casting Technique in Large-Scale Surface Mines: A Case Study of Heidaigou Surface Coal Mine in China
486
Development and application of carbon nanotubes assisted electromembrane extraction (CNTs/EME) for the determination of buprenorphine as a model of basic drugs from urine samples Original Research Article
487
Development and application of cathodic vacuum arc plasma for nanostructured and nanocomposite film deposition
488
Development and application of CD19-specific T cells for adoptive immunotherapy of B cell malignancies
489
Development and application of chiral crown ethers as selectors for chiral separation in high-performance liquid chromatography and nuclear magnetic resonance spectroscopy
490
Development and application of CN PLIF for single-shot imaging in turbulent flames
491
Development and application of coal risk management on technical support system
492
Development and application of combinatorial electrostatic atomization system “M-ist Combi”: High-throughput preparation of electrode materials
493
Development and Application of Compressible Vorticity Confinement
494
Development and application of constitutive equations for the multiple-stand hot rolling of Al-alloys
495
Development and application of damage assessment modeling: example assessment for the North Cape oil spill
496
Development and application of design transformations in ForSyDe
497
Development and Application of Diagnostic Test to Identify Students’ Misconceptions of Quantum Physics
498
Development and application of dilute surfactant–polymer flooding system for Shengli oilfield
499
Development and Application of Dtxr and Tox Genes Targeting Real-time PCR to Identify Corynebacterium diphtheriae, C. ulcerans, and C. pseudotuberculosis Simultaneously
500
Development and Application of Fire Video Image Detection Technology in China’s Road Tunnels
501
Development and application of force resultant models describing jack-up foundation behaviour
502
Development and application of functional assays for freshwater dissolved organic matter
503
Development and Application of Functional Surfaces
504
Development and application of glancing incident X-ray fluorescence spectrometry using parallel polycapillary X-ray lens
505
Development and application of Halanay-type theory: Evolutionary differential and difference equations with time lag
506
Development and application of high strength ternary boride base cermets
507
Development and application of high volume remote handling systems in support of JET and ITER
508
Development and Application of Highly Sensitive Anti-immune Complex ELISAs for Microcystins in Tap Water
509
Development and application of high-performance liquid chromatography for the study of two new oxyprenylated anthraquinones produced by Rhamnus species
510
Development and application of immunoaffinity chromatography for the determination of the triazinic biocides in seawater
511
Development and application of immunoaffinity column chromatography for atrazine in complex sample media Original Research Article
512
Development and application of innovative triaxially braided ductile FRP fabric for strengthening concrete beams
513
Development and application of intelligent system modeling and simulation platform
514
Development and application of journal impact measures in the Dutch science system
515
Development and application of kinetic model on biological anoxic/aerobic filter Original Research Article
516
Development and application of KrF lasers with different excitation methods
517
Development and application of landform segmentation procedures
518
Development and application of latent hydrosilylation catalyst [6]: control of activity of platinum catalyst by isocyanide derivatives on the crosslinking of silicone resin via hydrosilylation
519
Development and application of latent hydrosilylation catalyst [6]: control of activity of platinum catalyst by isocyanide derivatives on the crosslinking of silicone resin via hydrosilylation
520
Development and Application of Ligand-Exchange Reaction Method for the Determination of Clonazepam
521
Development and application of long-term sublethal whole sediment tests with Arenicola marina and Corophium volutator using Ivermectin as the test compound
522
Development and application of LSU rRNA probes for Karenia brevis in the Gulf of Mexico, USA
523
Development and application of marine gamma-ray measurements: a review
524
Development and application of Marinelli beaker standards for monitoring radioactivity in Dairy-Products by gamma-ray spectrometry
525
Development and application of MCNP auto-modeling tool: Mcam 3.0
526
Development and application of MC-SN coupled auto-modeling tool RCAM1.0
527
Development and application of methods for the determination of silver in polymeric dressings used for the care of burns
528
Development and application of micromachined Pd/SnO2 gas sensors with zeolite coatings
529
Development and application of microporous hollow fiber protected liquid-phase microextraction via gaseous diffusion to the determination of phenols in water
530
Development and application of molecular markers for poultry meat identification in food chain
531
Development and application of molecular-based diagnosis for ʹCandidatus Liberibacter asiaticusʹ, the causal pathogen of citrus huanglongbing
532
Development and Application of Monoclonal Antibodies Against Xylella fastidiosa, the Causal Bacterium of Pear Leaf Scorch
533
Development and application of multiple internal reference (housekeeper) gene assays for accurate normalisation of canine gene expression studies
534
Development and application of multiple internal reference (housekeeper) gene assays for accurate normalisation of canine gene expression studies
535
Development and application of Multiple-Locus Variable Number of tandem repeat Analysis (MLVA) to subtype a collection of Listeria monocytogenes
536
Development and application of multi-zone model for combustion and pollutants formation in direct injection diesel engine running with vegetable oil or its bio-diesel
537
Development and Application of Nanoparticles in Biomedical Imaging
538
Development and application of near-well multiphase upscaling for forecasting of heavy oil primary production
539
Development and application of needle trap devices
540
Development and application of new nucleic acid-based technologies for microbial community analyses in foods
541
Development and application of new technology for the treatment of complex massive sulphide ores case study—Faro lead/zinc concentrator—Yukon
542
Development and application of nonequilibrium simulation program for ion diffusion in battery
543
Development and Application of Oil Spill Model for Singapore Coastal Waters
544
Development and application of oligonucleotide probes for in situ detection of thermotolerant Campylobacter in chicken faecal and liver samples
545
Development and Application of One Separation-Free Safety Tube on the Disposable Infusion Needle
546
Development and application of online Stelmor Controlled Cooling System
547
Development and application of oxide-based flux powder for tungsten inert gas welding of austenitic stainless steels
548
Development and Application of Oxygen and Carbon Isotopic Measurements of Biogenic Carbonates by Ion Microprobe
549
Development and application of patterned conducting polymer thin films as chemoresponsive and electrochemically responsive optical diffraction gratings
550
Development and application of polymerase chain reaction (PCR) tests for the detection of subgroup J avian leukosis virus
551
Development and application of polymer-coated hollow fiber membrane microextraction to the determination of organochlorine pesticides in water
552
Development and application of polymeric monolithic stationary phases for capillary electrochromatography
553
Development and application of polysaccharide–lipid edible coating to extend shelf-life of dry bakery products Original Research Article
554
Development and application of predictive equations of maximal static moments generated by the trunk musculature
555
Development and application of predictive models for fungal growth as tools to improve quality control in yogurt production Original Research Article
556
Development and application of pressure-core-sampling systems for the investigation of gas- and gas-hydrate-bearing sediments
557
Development and application of procedures for the highly sensitive quantification of cyclosarin enantiomers in hemolysed swine blood samples
558
Development and application of proteomics technologies in Saccharomyces cerevisiae
559
Development and application of recombinant antibody-based immunoassays to tetraconazole residue analysis in fruit juices
560
Development and Application of Reflexodent in the Quantitative Functional Evaluation of Chewing Control in Patients with Temporomandibular Joint Dysfunction and a Control Group
561
Development and application of RF techniques for formation of preionized plasma in the target chamber
562
Development and application of RF techniques for formation of preionized plasma in the target chamber
563
Development and application of RF techniques for formation of preionized plasma in the target chamber
564
Development and application of salting-out assisted liquid/liquid extraction for multi-mycotoxin biomarkers analysis in pig urine with high performance liquid chromatography/tandem mass spectrometry
565
Development and application of SN Auto-Modeling Tool SNAM 2.1
566
Development and application of Spalart–Allmaras one equation turbulence model to three-dimensional supersonic complex configurations
567
Development and application of statistical models for CO concentration and duration events in the Milan urban area
568
Development and application of STEM for the biological sciences
569
Development and application of STEM for the biological sciences
570
Development and application of the active pulsing air classification
571
Development and application of the adaptive mesh technique in the three-dimensional numerical simulation of the welding process
572
Development and application of the added fluid mass and substructure techniques for integrated pressurized water reactor assembly
573
Development and application of the diffusive gradients in thin films technique for the measurement of total dissolved inorganic arsenic in waters Original Research Article
574
Development and Application of the Downhole Drilling String Shock-Absorption and Hydraulic Supercharging Device
575
Development and application of the drop number size moment modelling to spray combustion simulations
576
Development and application of the Ghent pulsed positron beam
577
Development and application of the integrated SWAT–MODFLOW model
578
Development and application of the material constitutive model in springback prediction of cold-bending
579
Development and application of the PBMR fission product release calculation model Original Research Article
580
Development and Application of the Reactor Coolant On-Line Leakage Evaluation Model for Pressurized Water Reactors
581
Development and Application of the Reactor Coolant On-Line Leakage Evaluation Model for Pressurized Water Reactors
582
Development and application of tidal creek ecosystem models
583
Development and application of tidal creek ecosystem models
584
Development and application of tools to characterize the oxidative degradation of AP/HTPB/Al propellants in a propellant reliability study
585
Development and application of UHPLC–MS/MS method for the determination of phenolic compounds in Chamomile flowers and Chamomile tea extracts
586
Development and application of ultra performance liquid chromatography–electrospray ionization tandem triple quadrupole mass spectrometry for determination of seven microcystins in water samples Original Research Article
587
Development and Application of Universal Formability Technology
588
Development and application of variable-magnification x-ray Bragg magnifiers
589
Development and application of variable-magnification x-ray Bragg magnifiers
590
Development and application of versatile bis-hydroxamic acids for catalytic asymmetric oxidation
591
Development and application of wall-function treatments for turbulent forced and mixed convection flows
592
Development and application of wetland zooplankton index to assess the degree of eutrophication in Sri Lankan reservoirs
593
Development and applications of a large scale fluids/structures simulation process on clusters
594
Development and applications of a real-time quantitative RT-PCR method (QRT-PCR) for BRCA1 mRNA
595
Development and applications of a simulation model for vessels in the Singapore Straits
596
Development and applications of a two-dimensional tip-tilting stage system with nanoradian-level positioning resolution
597
Development and applications of a two-dimensional tip-tilting stage system with nanoradian-level positioning resolution
598
Development and applications of cestode and trematode laboratory models
599
Development and Applications of Double-difference Seismic Tomography
600
Development and applications of field emitter arrays in Japan
601
Development and applications of gas electron multiplier detectors
602
Development and applications of gas electron multiplier detectors
603
Development and applications of grazing exit micro X-ray fluorescence instrument using a polycapillary X-ray lens
604
Development and applications of highly selective palladium-catalyzed monocoupling reactions of (cyclo)alkenes and 1,3-alkadienes bearing two or three electrophilic sites and bis(enol triflates) with terminal alkynes
605
Development and applications of injectable poly(ortho esters) for pain control and periodontal treatment
606
Development and applications of lithium ion capacitors
607
Development and applications of LPRM detectors
608
Development and applications of LPRM detectors
609
Development and applications of photo-triggered theranostic agents
610
Development and applications of position-sensitive solid-state gamma ray detectors
611
Development and applications of position-sensitive solid-state gamma ray detectors
612
Development and applications of rectangular box-type explosively bonded structures for high-heat-load beamline components
613
Development and applications of rectangular box-type explosively bonded structures for high-heat-load beamline components
614
Development and applications of solar-based thermoelectric technologies
615
Development and applications of the elasto-plastic cellular automaton
616
Development and applications of the gas electron multiplier
617
Development and applications of the gas electron multiplier
618
Development and applications of the IGISOL technique Original Research Article
619
Development and applications of the interfacial tension between water and organic or biological surfaces
620
Development and applications of the k0-based internal mono standard INAA method
621
Development and applications of ultrafine aluminium powders
622
Development and applications of ultrafine aluminium powders
623
Development and applications of vaccines and gene therapy in AIDS : Edited by G. Giraldo, D.P. Polognesi, M. Salvatore and E. Beth-Giraldo. Karger, Basel. ISBN 3-8055-6256-X. Price: $234.00
624
DEVELOPMENT AND APPRAISAL OF ECONOMICAL AND SUSTAINABLE APPROACH FOR WEED MANAGEMENT IN DRILL SEEDED AEROBIC RICE (Oryza sativa L.)
625
Development and approval of the trifunctional antibody catumaxomab (anti-EpCAM × anti-CD3) as a targeted cancer immunotherapy
626
Development and assessment of 153Sm-zoledronate complex as a possible bone pain palliative agent
627
Development and assessment of 316LVM cardiovascular stents
628
Development and assessment of 316LVM cardiovascular stents
629
Development and assessment of 316LVM cardiovascular stents
630
Development and assessment of a 250 m spatial resolution MODIS annual land cover time series (2000–2011) for the forest region of Canada derived from change-based updating
631
Development and assessment of a 3D pharmacophore for ligand recognition of BDZR/GABAA receptors initiating the anxiolytic response Original Research Article
632
Development and assessment of a coupled strategy for conjugate heat transfer with Large Eddy Simulation: Application to a cooled turbine blade
633
Development and assessment of a distribution network of hydro-methane, methanol, oxygen and carbon dioxide in Paraguay
634
Development and assessment of a landscape-scale ecological threat index for the Lower Colorado River Basin
635
Development and assessment of a load decomposition method applied at the distribution level
636
Development and assessment of a Microsoft Kinect based system for imaging the breast in three dimensions
637
Development and assessment of a new methodology for end of combustion detection and its application to cycle resolved heat release analysis in IC engines
638
Development and assessment of a new quick quench stir caster design for the production of metal matrix composites
639
Development and Assessment of A Printed Educational Material Entitled “Guide on Breastfeeding: Facts Vs Myths”
640
Development and Assessment of a Single Tube Internally Controlled Multiplex PCR Assay to Detect Different Pathogenic Bacteria Involved in Blood Stream Infections
641
Development and assessment of a sub-channel code applicable for trans-critical transient of SCWR
642
Development and assessment of a Web-based evaluation and management coding curriculum for residents
643
Development and assessment of an efficient vadose zone module solving the 1D Richardsʹ equation and including root extraction by plants
644
Development and Assessment of Effects of De-Stress Training Program on Stress of Mothers with Mentally Disabled Children
645
Development and assessment of experimental dental polymers with enhanced polymerisation, crosslink density and resistance to fluid permeability based on ethoxylated-Bisphenol-A-dimethacrylates and 2-Hydroxyethyl methacrylate
646
Development and assessment of healthy properties of meat and meat products designed as functional foods
647
Development and assessment of hemostasis chitosan dressings
648
Development and Assessment of Loop-Mediated Isothermal Amplification (LAMP) Assay for the Diagnosis of Human Visceral Leishmaniasis in Iran.
649
Development and assessment of pilot food safety educational materials and training strategies for Hispanic workers in the mushroom industry using the Health Action Model
650
Development and Assessment of Respectful Maternity Care Questionnaire in Iran
651
Development and assessment of system analysis code, TASS/SMR for integral reactor, SMART
652
DEVELOPMENT AND ASSESSMENT OF TECHNOLOGIES OF MISCANTHUS AND SWITCHGRASS GROWING IN FOREST-STEPPE ZONE OF UKRAINE
653
Development and assessment of validity and reliability of the Persian version of vestibular rehabilitation benefit questionnaire
654
Development and automation of microelectromechanical systems-based biochip platform for protein assay
655
Development and Behavior ofSpodoptera exigua(Lepidoptera: Noctuidae) Larvae in Choice Tests with Food Substrates Containing Toxins ofBacillus thuringiensis
656
Development and behaviour of a radar-based operational tool for hailstorms identification
657
Development and benchmarking of a 2D transient thermal model for GFR plate-type fuel
658
Development and biochemical characterization of a 2′-C-cyano-2′-deoxy-1-β-d-arabino-pentofuranosylcytosine (CNDAC)-resistant variant of the human fibrosarcoma cell line HT-1080
659
Development and biocompatibility of hard Ti-based coatings using plasma immersion ion implantation-assisted deposition
660
Development and biocultural diversity in northern Thailand
661
Development and Biological Characteristics of Brown Quail (Coturnix ypsilophora) Embryonic Fibroblast Primary Cells
662
Development and biological evaluation of C60 fulleropyrrolidine-thalidomide dyad as a new anti-inflammation agent Original Research Article
663
Development and Calibration of a Karman Vortex Probe for Measurement of Molten-Steel Velocities
664
Development and Calibration of a Karman Vortex Probe for Measurement of Molten-Steel Velocities
665
DEVELOPMENT AND CALIBRATION OF A K-BAND GROUND-BASED HYPERSPECTRAL MICROWAVE RADIOMETER FOR WATER VAPOR MEASUREMENTS
666
Development and calibration of a load sensing cervical distractor capable of withstanding autoclave sterilization
667
Development and calibration of a low-flow version of the Marple-Miller impactor (mmi™)
668
Development and calibration of a network-based streaming electrification model for core-form transformer structures
669
Development and calibration of a reduced chemical kinetic model of n-heptane for HCCI engine combustion
670
Development and calibration of a star photometer to measure the aerosol optical depth: Smoke observations at a high mountain site
671
Development and calibration of acoustic video camera system for moving vehicles
672
Development and Calibration of an Efficiency Factor Model for Recycled Aggregate Concrete Struts
673
Development and calibration of epiphytic lichens as saltfall biomonitors—dry-deposition modelling
674
Development and calibration of major components for the STEREO/PLASTIC (plasma and suprathermal ion composition) instrument Original Research Article
675
Development and calibration of radio-isotope cone penetrometers
676
Development and calibration of radio-isotope cone penetrometers
677
Development and calibration of real-time PCR for quantification of airborne microorganisms in air samples
678
Development and calibration of standards for the coating thickness in the range of micrometer and nanometer
679
Development and calibration of the tracking Compton/Pair telescope MEGA
680
Development and calibration of the tracking Compton/Pair telescope MEGA
681
Development and cell fate in interspecific (mus musculus/mus caroli) intraocular transplants of mouse molar tooth-germ tissues detected by in situ hybridization
682
Development and cell fate in interspecific (Mus musculus/Mus caroli) orthotopic transplants of mouse molar tooth germs detected by in situ hybridization
683
Development and changing the surface and performance of a novel thin layer membrane in the presence of epichlorohydrine Original Research Article
684
Development and characterisation of (Ni, Cu, Co)-YSZ and Cu-Co-YSZ cermets anode materials for SOFC application
685
Development and characterisation of a compact light-addressable potentiometric sensor (LAPS) based on the digital light processing (DLP) technology for flexible chemical imaging
686
Development and characterisation of a full-thickness acellular porcine bladder matrix for tissue engineering
687
Development and characterisation of a head calibration phantom for in vivo measurements of actinides
688
Development and characterisation of a new biodegradable edible film made from kefiran, an exopolysaccharide obtained from kefir grains
689
Development and characterisation of a new MgSO4−zeolite composite for long-term thermal energy storage
690
Development and characterisation of a new ODS ferritic steel for fusion reactor application
691
Development and characterisation of a new Sr selective resin for the rapid determination of 90Sr in environmental water samples
692
Development and characterisation of a screen-printed mixed potential gas sensor
693
Development and characterisation of a vacuum flash evaporator for concentrating a heat sensitive aqueous peptide stream Original Research Article
694
Development and characterisation of a visible light photon counting imaging detector system
695
Development and characterisation of a visible light photon counting imaging detector system
696
Development and characterisation of Ag–Cu–Ti brazes prepared with planar flow casting
697
Development and characterisation of Ag–Cu–Ti brazes prepared with planar flow casting
698
Development and characterisation of an agar–polyvinyl alcohol blend hydrogel
699
Development and characterisation of an antibody for the immunohistochemical detection of inhibin/activin betaE (βE) in normal human ovarian and placental tissue
700
Development and characterisation of an immunoaffinity chromatographic column for the on-line determination of the pesticide triclopyr
701
Development and characterisation of biological particles and bioaerosol standards
702
Development and characterisation of blend films based on fish protein isolate and fish skin gelatin
703
Development and characterisation of C–Mn–Al–Si–Nb TRIP aided steel
704
Development and characterisation of composite films made of kefiran and starch
705
Development and characterisation of dense lanthanum-based perovskite oxygen-separation capillary membranes for high-temperature applications
706
Development and characterisation of direct laser sintering Cu-based metal powder
707
Development and characterisation of functionalised ceramic microtubes for bacteria filtration
708
Development and characterisation of high-density oxide fibre-reinforced oxide ceramic matrix composites with improved mechanical properties
709
Development and characterisation of high-speed steel matrix composites gradient materials
710
DEVELOPMENT AND CHARACTERISATION OF IRAP MARKERS FROM EXPRESSED RETROTRANSPOSON-LIKE SEQUENCES IN Pinus sylvestris L.
711
Development and characterisation of low-cost polymeric composite materials
712
Development and characterisation of metformin loaded spray dried Bora rice microspheres
713
Development and characterisation of model TRIP steel microstructures
714
Development and characterisation of molecularly imprinted polymers based on methacrylic acid for selective recognition of drugs
715
Development and characterisation of monoclonal antibodies against seabass immunoglobulinsDicentrarchus labraxLinnaeus, 1758
716
Development and characterisation of novel heterogeneous palm oil mill boiler ash-based catalysts for biodiesel production
717
Development and characterisation of novel nutraceuticals with spray drying technology Original Research Article
718
Development and characterisation of silver-doped bioactive glass-coated sutures for tissue engineering and wound healing applications
719
Development and characterisation of tempered cocoa butter emulsions containing up to 60% water Original Research Article
720
Development and characterisation of triaxial electrical porcelains from Ugandan ceramic minerals
721
Development and characterisation of vinyloxyaminosilane grafted ethylene-propylene-diene terpolymer (EPDM-g-VOS) for engineering applications
722
Development and characterisation of whey protein micro-beads as potential matrices for probiotic protection
723
Development and characterisations of WC–12Co microwave clad
724
Development and characteristics of a 400 W-class direct methanol fuel cell stack
725
Development and characteristics of a food image set rated for hedonic value for use in neuroimaging studies
726
Development and characteristics of a new strain of obese hyperinsulinemic and hyperlipidemic dam salt-sensitive rat: The Dahl salt-sensitive/NIH-corpulent rat
727
Development and characteristics of a well-being enhancing psychotherapeutic strategy: well-being therapy
728
Development and characteristics of MOSFET protein chip using nano SAMs
729
Development and characteristics of solenoid-type SMD RF chip inductors
730
Development and characterization by HRTEM of hot-pressed Si3N4–SiC(w) composites
731
Development and characterization of “push–pull” sampling device with fast reaction quenching coupled to high-performance liquid chromatography for pharmaceutical process analytical technologies
732
Development and characterization of a 3D CdTe:Cl semiconductor detector for medical imaging
733
Development and characterization of a 3D CdTe:Cl semiconductor detector for medical imaging
734
Development and characterization of a 3D cone beam tomography system
735
Development and characterization of a 3D cone beam tomography system
736
Development and characterization of a 3D GaAs X-ray detector for medical imaging
737
Development and characterization of a 3D GaAs X-ray detector for medical imaging
738
Development and characterization of a chamber for an antibacterial performance test
739
Development and characterization of a clinically useful animal model of epithelial ovarian cancer in the Fischer 344 rat
740
Development and characterization of a colon PDX model that reproduces drug responsiveness and the mutation profiles of its original tumor
741
Development and characterization of a continuous HSOBM flake processing mill
742
Development and characterization of a copper optical sensor based on immobilization of synthesized 1-phenyl-1,2-propanedione-2-oxime thiosemicarbazone on a triacetylcellulose membrane
743
Development and characterization of a HDPE-sand-natural fiber composite
744
Development and characterization of a high abrasion resistant alumina–zirconia composite material
745
Development and characterization of a high capacity lithium/thionyl chloride battery
746
Development and characterization of a lab-scale entrained flow reactor for testing biomass fuels
747
Development and characterization of a low-energy particle-identification telescope array for proton and alpha spectroscopy
748
Development and characterization of a low-energy particle-identification telescope array for proton and alpha spectroscopy
749
Development and characterization of a magnetic bead-quantum dot nanoparticles based assay capable of Escherichia coli O157:H7 quantification Original Research Article
750
Development and characterization of a microfiltration membrane catalyst containing sulfonated polystyrene grafts
751
Development and characterization of a miniature PEM fuel cell stack with carbon bipolar plates
752
Development and characterization of a modular acquisition system for a 4D PET block detector
753
Development and characterization of a modular acquisition system for a 4D PET block detector
754
Development and characterization of a monoclonal antibody against porcine CD205
755
Development and characterization of a monoclonal antibody against porcine CD205
756
Development and characterization of a nano-drug delivery system containing vasaka phospholipid complex to improve bioavailability using quality by design approach
757
Development and characterization of a nanomultilayer coating of pectin and chitosan – Evaluation of its gas barrier properties and application on ‘Tommy Atkins’ mangoes Original Research Article
758
Development and characterization of a new amylase type time–temperature indicator
759
Development and characterization of a new conducting carbon composite electrode Original Research Article
760
Development and characterization of a new organic/inorganic hybrid ternary protonic conductive material for solid state cells
761
Development and characterization of a new polyampholyte–surfactant complex applied to the solid phase extraction of bisphenol-A
762
Development and characterization of a novel biodegradable edible film obtained from psyllium seed (Plantago ovata Forsk) Original Research Article
763
Development and characterization of a novel carbon fiber based cathode for semi-fuel cell applications
764
Development and characterization of a novel CD34 monoclonal antibody that identifies sheep hematopoietic stem/progenitor cells
765
Development and characterization of a novel silicon-based glassy composite as an anode material for Li-ion batteries
766
Development and Characterization of a Novel Spray-Dried Powder for Inhalation of Cinacalcet HCl Nanoparticles
767
Development and characterization of a porcine model to study osteoclast differentiation and activit y
768
Development and characterization of a porous micro-patterned scaffold for vascular tissue engineering applications
769
Development and characterization of a prototype of a lactic acid–based time–temperature indicator for monitoring food product quality Original Research Article
770
Development and characterization of a quasi-ternary diagram based on La0.8Sr0.2(Co,Cu,Fe)O3 oxides in view of application as a cathode contact material for solid oxide fuel cells
771
Development and Characterization of a Silica Monolith Immobilized Enzyme Micro-bioreactor
772
Development and characterization of a solvent extraction–gas chromatographic/mass spectrometric method for the analysis of perfluorooctanesulfonamide compounds in solid matrices
773
Development and characterization of a TES optical imaging array for astrophysics applications
774
Development and characterization of a TES optical imaging array for astrophysics applications
775
Development and Characterization Of A Thermoforming Apparatus Using Axiomatic Design Theory and Taguchi Method
776
Development and characterization of a titanosilicate ETS-10-coated optical fiber reactor towards the photodegradation of methylene blue
777
Development and characterization of a wear resistant bainite/martensite ductile iron by combination of alloying and a controlled cooling heat-treatment
778
DEVELOPMENT AND CHARACTERIZATION OF A WIRELESS MEMS INERTIAL SYSTEM FOR HEALTH MONITORING OF STRUCTURES. PART 2: APPLICATIONS OF THE DEVELOPED SYSTEM
779
DEVELOPMENT AND CHARACTERIZATION OF A WIRELESS MEMS INERTIAL SYSTEM FOR HEALTH MONITORING OF STRUCTURES. PART I: DESCRIPTION OF SENSOR AND DATA ACQUISITION SYSTEM
780
Development and characterization of a wood adhesive using bagasse lignin
781
Development and characterization of adhesives from soy protein for bonding wood
782
Development and characterization of advanced 9Cr ferritic/martensitic steels for fission and fusion reactors
783
Development and characterization of Al2Cu and Ag2Al nanoparticle dispersed water and ethylene glycol based nanofluid
784
Development and characterization of alkyloxy-substituted biphenyl compounds as guest in blue OLEDs
785
Development and characterization of Al–Li alloys
786
Development and characterization of an electrostatic particle sampling system for the selective collection of trace explosives
787
Development and characterization of an ELISA assay in PDMS microfluidic channels
788
Development and characterization of an immobilized enzyme reactor (IMER) based on human glyceraldehyde-3-phosphate dehydrogenase for on-line enzymatic studies
789
Development and characterization of an immobilized enzyme reactor based on glyceraldehyde-3-phosphate dehydrogenase for on-line enzymatic studies
790
Development and characterization of an immobilized human organic cation transporter based liquid chromatographic stationary phase
791
Development and characterization of an immunoaffinity column for the selective extraction of bisphenol A from serum samples
792
Development and characterization of an immunoaffinity monolith for selective on-line extraction of bisphenol A from environmental water samples Original Research Article
793
Development and characterization of an inorganic foam obtained by using sodium bicarbonate as a gas generator
794
Development and characterization of an interleukin-2–transduced human ovarian carcinoma tumor vaccine not expressing major histocompatibility complex molecules, , ,
795
Development and characterization of an open tubular column containing immobilized P-glycoprotein for rapid on-line screening for P-glycoprotein substrates
796
Development and characterization of anodically initiated luminescent detection for alcohols and carbohydrates
797
Development and characterization of antibodies to human heart fatty acid binding proteins
798
Development and characterization of anti-fouling cellulose hollow fiber UF membranes for oil–water separation
799
Development and characterization of antimicrobial poly(l-lactic acid) containing trans-2-hexenal trapped in cyclodextrins
800
Development and Characterization of Bioadhesive Gel of Microencapsulated Metronidazole for Vaginal Use
801
Development and characterization of biodegradable nanospheres as delivery systems of anti-ischemic adenosine derivatives
802
Development and characterization of biofilms based on Amaranth flour (Amaranthus caudatus) Original Research Article
803
Development and characterization of bipolar lithium composite polymer electrolyte (CPE)-FeS2 battery for applications in electric vehicles
804
Development and characterization of bottom-viewed inductively coupled plasma-atomic emission spectrometry
805
Development and characterization of bottom-viewed inductively coupled plasma-atomic emission spectrometry
806
Development and characterization of Ca–Mg–Zn–Cu bulk metallic glasses
807
Development and characterization of cellulose–polymethacrylate mucoadhesive film for buccal delivery of carvedilol
808
Development and characterization of chemically stabilized ionic liquid membranes-Part I: Nanoporous ceramic supports
809
Development and characterization of chitosan-polycarbophil interpolyelectrolyte complex-based 5-fluorouracil formulations for buccal, vaginal and rectal application
810
Development and characterization of chlorine-selective pulsed discharge emission detector for gas chromatography
811
Development and characterization of CoAl–Al2O3 intermetallic matrix nanocomposite
812
Development and characterization of coaxially electrospun gelatin coated poly (3-hydroxybutyric acid) thin films as potential scaffolds for skin regeneration
813
Development and characterization of composite edible films based on sodium alginate and pectin Original Research Article
814
Development and characterization of composite edible films based on whey protein isolate and mesquite gum Original Research Article
815
Development and characterization of composites with ground elastomeric vulcanized scraps as filler
816
Development and characterization of controlled release polar lipid microparticles of candesartan cilexetil by solid dispersion
817
Development and characterization of covalently cross-linked SPEEK/Cs-TPA/CeO2 composite membrane and membrane electrode assembly for water electrolysis
818
Development and characterization of cube-textured Ni–Cu–Co substrates for YBCO-coated conductors Original Research Article
819
Development and characterization of degradable thiol-allyl ether photopolymers
820
Development and characterization of edible chitosan/olive oil emulsion films
821
Development and Characterization of Elaeis oleifera Microsatellite Markers
822
Development and characterization of electro deposited Nickel–Titanium Carbo Nitride (TiCN) metal matrix nanocomposite deposits
823
Development and characterization of enhanced green fluorescent protein and luciferase expressing cell line for non-destructive evaluation of tissue engineering constructs
824
Development and characterization of Eudragit based mucoadhesive buccal patches of salbutamol sulfate
825
Development and characterization of Fe70Pd30 ferromagnetic shape memory splats
826
Development and Characterization of Fermented and Unfermented Whey Beverages Fortified with Vitamin E
827
Development and characterization of ferrihydrite-modified diatomite as a phosphorus adsorbent
828
Development and characterization of food packaging film from cellulose sulfate
829
Development and characterization of GRGDSPC-modified poly(lactide-co-glycolide acid) porous microspheres incorporated with protein-loaded chitosan microspheres for bone tissue engineering
830
Development and characterization of high performance nano-hybrid GFRE composites for structural applications
831
Development and characterization of hybrid membranes based on an organic matrix modified with silanes for metal separation
832
Development and characterization of hydrogels based on natural polysaccharides: Policaju and chitosan
833
Development and characterization of immobilized human organic anion transporter-based liquid chromatographic stationary phase: hOAT1 and hOAT2
834
Development and characterization of immunoaffinity columns for the selective extraction of a new developmental pesticide: Thifluzamide, from peanuts
835
Development and characterization of immunoaffinity columns for the selective extraction of a new developmental pesticide: Thifluzamide, from peanuts Original Research Article
836
Development and characterization of induction heating–electrothermal vaporization (IH-ETV) sample introduction for inductively coupled plasma spectrometry
837
Development and characterization of ion selective electrode for the assay of antimony
838
Development and characterization of ionic liquid doped solid polymer electrolyte membranes for better efficiency
839
Development and characterization of laser clad high temperature self-lubricating wear resistant composite coatings on Ti–6Al–4V alloy
840
Development and characterization of liposomes containing glycols as carriers for diclofenac
841
Development and characterization of liquid carbon fibre reinforced aluminium matrix composite
842
Development and characterization of lithium salts doped nanoconductive ROMP polymers
843
Development and Characterization of Low-Emitting Ceramics
844
Development and characterization of magnesium composites containing nano-sized silicon carbide and carbon nanotubes as hybrid reinforcements
845
Development and characterization of methacrylate-based hydrazide monoliths for oriented immobilization of antibodies
846
Development and characterization of MgO:Nd,Li synthesized by solution combustion synthesis for 2D optically stimulated luminescence dosimetry
847
Development and characterization of microbial biosensors for evaluating low biochemical oxygen demand in rivers
848
Development and characterization of molecularly imprinted polymers for the selective enrichment of podophyllotoxin from traditional Chinese medicines Original Research Article
849
Development and characterization of monoclonal antibodies against canine trypsin
850
Development and characterization of monoclonal antibodies against canine trypsin
851
Development and characterization of monoclonal antibodies against FMD virus type Asia-1 and determination of antigenic variations in the field strains
852
Development and characterization of monoclonal antibodies against FMD virus type Asia-1 and determination of antigenic variations in the field strains
853
Development and characterization of monoclonal antibodies to chicken interleukin-15
854
Development and characterization of monoclonal antibodies to chicken interleukin-15
855
Development and characterization of monoclonal antibodies to spring viraemia of carp virus
856
Development and characterization of monoclonal antibodies to spring viraemia of carp virus
857
Development and characterization of mouse monoclonal antibodies reactive with chicken CD83
858
Development and characterization of mouse monoclonal antibodies reactive with chicken CD83
859
Development and characterization of mouse monoclonal antibodies reactive with chicken interleukin-2 receptor αlpha chain (CD25)
860
Development and characterization of mouse monoclonal antibodies reactive with chicken interleukin-2 receptor αlpha chain (CD25)
861
Development and characterization of mouse monoclonal antibodies reactive with chicken TL1A
862
Development and characterization of mouse monoclonal antibodies reactive with chicken TL1A
863
Development and characterization of mouse monoclonal antibodies specific for chicken interleukin 18
864
Development and characterization of mouse monoclonal antibodies specific for chicken interleukin 18
865
Development and characterization of multilayer films of polyaniline, titanium dioxide and CTAB for potential antimicrobial applications
866
Development and Characterization of MWCNT/EPDM Based Composite as a Thermal Insulator for High Thermal Applications
867
Development and characterization of nanocapsules comprising dodecyltrimethylammonium chloride and κ-carrageenan
868
Development and characterization of nanocomposite materials
869
Development and Characterization of Nanocomposite Membranes based on Chitosan, Polystyrene and Montmorillonite for Pervaporation Separation of Phenol and Chlorophenols from Water
870
Development and Characterization of Nanoliposomal Hydroxyurea Against BT-474 Breast Cancer Cells
871
Development and characterization of nanoporous carbon membranes for protein ultrafiltration
872
Development and Characterization of Nanostructured Pharmacosomal Mesophases: An Innovative Delivery System for Bioactive Peptides
873
Development and characterization of nanostructured-perlitecementitious surface compounds
874
Development and characterization of new coatings for improved balance of mechanical properties of titanium matrix composites
875
Development and characterization of new coatings for improved balance of mechanical properties of titanium matrix composites
876
Development and characterization of new insulin containing polysaccharide nanoparticles
877
Development and characterization of new monoclonal antibodies specific for coplanar polychlorinated biphenyls
878
Development and characterization of new monoclonal antibodies specific for coplanar polychlorinated biphenyls Original Research Article
879
Development and characterization of Ni-free Ti-base shape memory and superelastic alloys
880
Development and Characterization of Niosomal Gel System using Lallementia royaleana Benth. Mucilage for the Treatment of Rheumatoid Arthritis
881
Development and Characterization of Nonpeptidic Small Molecule Inhibitors of the XIAP/Caspase-3 Interaction Original Research Article
882
Development and characterization of normal colonic epithelial cell lines derived from normal mucosa of patients with colon cancer
883
Development and characterization of novel alginate-based hydrogels as vehicles for bone substitutes
884
Development and characterization of novel charged surface modification macromolecule to polyethersulfone hollow fiber membrane with polyvinylpyrrolidone and water
885
Development and characterization of novel electrically conductive PANI–PGS composites for cardiac tissue engineering applications
886
Development and characterization of novel hydrophilic surface modifying macromolecule for polymeric membranes
887
Development and characterization of novel probiotic-residing pullulan/starch edible films
888
Development and characterization of novel starch and alkyl ketene dimer microcellular foam particles
889
Development and characterization of on-chip biopolymer membranes
890
Development and characterization of optimized sustained release voriconazole-loaded chitosan nanoparticles for ocular delivery
891
Development and characterization of oral liposomes of vegetal ceramide based amphotericin B having enhanced dry solubility and solubility
892
Development and characterization of organo fluorohectorite polyethersulfone nanocomposites for high performance applications
893
Development and characterization of orodispersible tablets of famotidine containing a subliming agent
894
Development and Characterization of Paracetamol Complexes with Hydroxypropyl-β-Cyclodextrin
895
Development and characterization of paraffin-based shape stabilized energy storage materials
896
Development and characterization of PEEK/carbon nanotube composites Original Research Article
897
Development and characterization of photopolymerizable biodegradable materials from PEG–PLA–PEG block macromonomers
898
Development and characterization of Poly (vinyl alcohol) based hydrogels for potential use as an articular cartilage replacement
899
Development and characterization of poly ethyl metha acrylate–iron oxide(III) based hydrophobic liquid nanocomposite films
900
Development and characterization of poly(3,4-ethylenedioxythiophene)-coated poly(methylene blue)-modified carbon electrodes
901
Development and characterization of poly(vinylidene fluoride)–poly(acrylic acid) pore-filled pH-sensitive membranes
902
Development and characterization of poly(ε-caprolactone) hollow fiber membranes for vascular tissue engineering
903
Development and characterization of polyclonal antibody against human kappa light chain in rabbit
904
Development and characterization of polymer inclusion membranes for the separation and speciation of inorganic As species
905
Development and characterization of polymer–ceramic continuous fiber reinforced functionally graded composites for aerospace application
906
DEVELOPMENT AND CHARACTERIZATION OF POLYMERIC ANTISCALANTS FOR COOLING WATER SYSTEMS
907
Development and characterization of porous epoxy monoliths via pore-initiated polymerization
908
Development and characterization of porous silicon based photodiodes
909
Development and characterization of porous silicon based photodiodes
910
Development and characterization of real-time personal neutron dosemeter with two silicon detectors
911
Development and characterization of real-time personal neutron dosemeter with two silicon detectors
912
Development and characterization of recombinant whole cells expressing the soluble epoxide hydrolase of Danio rerio and its variant for enantioselective resolution of racemic styrene oxides
913
Development and characterization of recombinant whole-cell biocatalysts expressing epoxide hydrolase from Rhodotorula glutinis for enantioselective resolution of racemic epoxides
914
Development and characterization of rhVEGF-loaded poly(HEMA–MOEP) coatings electrosynthesized on titanium to enhance bone mineralization and angiogenesis
915
Development and characterization of rodent cardiac phantoms: comparison with in vivo cardiac imaging
916
Development and characterization of rozuvastatin loaded self emulsifying drug delivery system for the effective management of hypolipidemia
917
Development and characterization of scintillating fiber—APD-based detector
918
Development and characterization of scintillating fiber—APD-based detector
919
Development and characterization of self-aggregated nanoparticles from anacardoylated chitosan as a carrier for insulin
920
Development and characterization of self-aggregated nanoparticles from anacardoylated chitosan as a carrier for insulin
921
Development and characterization of shape memory Cu–Zn–Al thin films
922
Development and characterization of SiC(f)/MoSi2–Si3N4(p) hybrid composites
923
Development and characterization of SiC(f)/MoSi2–Si3N4(p) hybrid composites
924
Development and characterization of single domain monoclonal antibody against programmed cell death ligand-1; as a cancer inhibitor candidate
925
Development and characterization of single wall carbon nanotube–Nafion composite actuators
926
Development and characterization of single wire-arc-plasma sprayed coatings of nickel on carbon blocks and alumina tube substrates
927
Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications
928
Development and Characterization of Solid Dispersion for Dissolution Improvement of Furosemide by Cogrinding Method
929
Development and characterization of solid dispersion of piroxicam for improvement of dissolution rate using hydrophilic carriers
930
Development and characterization of stable cell lines constitutively expressing the porcine reproductive and respiratory syndrome virus nucleocapsid protein
931
Development and characterization of starch nanoparticles by gamma radiation: Potential application as starch matrix filler
932
Development and characterization of sulfonated poly(ether sulfone) for proton exchange membrane materials
933
Development and characterization of sulfonated polysulfone membranes for direct methanol fuel cells Original Research Article
934
Development and characterization of the control assembly system for the large 2400 MWth Generation IV gas-cooled fast reactor
935
Development and characterization of the latest X-ray SOI pixel sensor for a future astronomical mission
936
Development and characterization of the latest X-ray SOI pixel sensor for a future astronomical mission
937
Development and characterization of the partial nitrification aerobic granules in a sequencing batch airlift reactor
938
DEVELOPMENT AND CHARACTERIZATION OF TITANIUM ALLOY FOAMS
939
Development and characterization of titanium-containing hydroxyapatite for medical applications
940
Development and characterization of Triticum aestivum–Aegilops kotschyi amphiploids with high grain iron and zinc contents
941
Development and characterization of tubular direct methanol fuel cells for use in in situ NMR analysis
942
Development and characterization of two nano-structured systems for topical application of flavanones isolated from Eysenhardtia platycarpa
943
Development and Characterization of v-myc/v-raf-Transformed Murine Fetal Thymocyte Cell Lines
944
Development and characterization of wheat gluten microspheres for use in a controlled release system
945
Development and characterization of ZnO, Au/ZnO and Pd/ZnO thin films through their adsorptive and catalytic properties
946
Development and characterization of β-secretase monolithic micro-immobilized enzyme reactor for on-line high-performance liquid chromatography studies
947
Development and characterizations of BaO–CaO–Al2O3–SiO2 glass–ceramic sealants for intermediate temperature solid oxide fuel cell application
948
Development and characterizations of Bi2O3-containing glass–ceramic sealants for sodium sulfur battery
949
Development and characterizations of super-fine wool powder
950
Development and clinical application of a broad range 16S quantitative PCR assay for detection of bacteria in the uterus of the mare
951
Development and clinical application of a broad range 16S quantitative PCR assay for detection of bacteria in the uterus of the mare
952
Development and clinical application of an immunoassay using intact Helicobacter pylori attached to a solid phase as an antigen
953
Development- and cold-regulated accumulation of cold shock domain proteins in wheat
954
Development and commercial demonstration of the BioCOP™ thermophile process
955
Development and commissioning of a Monte Carlo photon beam model for Varian Clinac 2100EX linear accelerator
956
Development and Commissioning of Systems for Controlling the Main Parameters of the Boiler in the Process Control System of a 500-MW Power Unit at the Reftinsk District Power Station
957
Development and Commissioning of Systems for Controlling the Main Parameters of the Boiler in the Process Control System of a 500-MW Power Unit at the Reftinsk District Power Station
958
Development and commissioning results of the KSTAR discharge control system
959
Development and comparative analysis of tropospheric ozone prediction models using linear and artificial intelligence-based models in Mexicali, Baja California (Mexico) and Calexico, California (US)
960
Development and comparative study of different nanofiltration membranes for recovery of highly charged large ions Original Research Article
961
Development and comparative study of two near-exact approximations to the distribution of the product of an odd number of independent Beta random variables
962
Development and comparison in uncertainty assessment based Bayesian modularization method in hydrological modeling
963
Development and comparison of advanced cascading cycles coupling a solid/gas thermochemical process and a liquid/gas absorption process
964
Development and Comparison of Conventional PCR and SYBR Green Real Time PCR for Detection of Aggregatibacter actinomycetemcomitans and Tannerella forsythensis
965
Development and comparison of four sleep spindle detection methods
966
Development and Comparison of In-house Line Probe Assay (LiPA) and SYBR Green Real-time PCR Regarding the Detection of Periodontal Pathogens
967
Development and Comparison of Inhouse Line Probe Assay (LiPA) and SYBR Green Real-time PCR Regarding the Detection of Periodontal Pathogens
968
Development and comparison of Landsat radiometric and snowpack model inversion techniques for estimating geothermal heat flux
969
Development and comparison of methods for measuring heavy metal concentrations in coral tissues
970
Development and comparison of methods to estimate the catabolic versatility of metal-affected soil microbial communities
971
Development and comparison of methods to estimate the catabolic versatility of metal-affected soil microbial communities
972
Development and comparison of neural network based soft sensors for online estimation of cement clinker quality
973
Development and comparison of optical and acoustic methods for in situ characterisation of particle fouling Original Research Article
974
Development and comparison of quantitative methods to evaluate the curd solidity of cauliflower Original Research Article
975
Development and Comparison of Sampling Techniques for a Broad Range, Semiquantitative Polymerase Chain Reaction Assay for Detection of Bacterial DNA in the Equine Uterus
976
Development and Comparison of Solution Methods for Modeling Reaction and Diffusion in "Molecular-Square" Membranes
977
Development and comparison of the DTM, the DOM and the FVM formulations for the short-pulse laser transport through a participating medium
978
Development and comparison of three liquid chromatography–atmospheric pressure chemical ionization/mass spectrometry methods for determining vitamin D metabolites in human serum
979
Development and comparison of two analytical methods to quantify the mercury content in honey
980
Development and comparison of two analytical methods to quantify the mercury content in honey
981
Development and comparison of two dispersive liquid–liquid microextraction techniques coupled to high performance liquid chromatography for the rapid analysis of bisphenol A in edible oils
982
Development and comparison of two expander cycles used in refrigeration system of olefin plant based on exergy analysis
983
Development and comparison of two immunoassays for the detection of 2,4,6-trinitrotoluene (TNT) based on surface plasmon resonance
984
Development and comparisons of efficient gas-cultivation systems for anaerobic carbon monoxide-utilizing microorganisms
985
Development and complete validation of a method for the determination of dimethyl mercury in air and other media Original Research Article
986
Development and composition of the seeds of nine genotypes of the Medicago truncatula species complex
987
Development and conditioning of the high current ion source for the EAST neutral beam injector
988
Development and conditioning of the high current ion source for the EAST neutral beam injector
989
Development and conservation of Philippine mangroves: institutional issues
990
Development and construction of a neutron beam line for accelerator-based boron neutron capture synovectomy
991
Development and construction of large size signal electrodes for the ATLAS electromagnetic calorimeter
992
Development and construction of large size signal electrodes for the ATLAS electromagnetic calorimeter
993
Development and construction of the novel solar thermal desiccant cooling system incorporating hot water production
994
Development and Content Validation of a Transcultural Instrument to Assess Organizational Readiness for Knowledge Translation in Healthcare Organizations: The OR4KT
995
Development and content validity testing of the Cardiac Symptom Survey in patients after coronary artery bypass grafting
996
Development and contribution of rf heating and current drive systems to long pulse, high performance experiments in JT-60U
997
Development and control of a low-cost linear variable-reluctance motor for precision manufacturing automation
998
Development and control of a prototype permanent-magnet DC linear motor
999
Development and control of a prototype pneumatic active suspension system
1000
Development and Control of an upper Limb Rehabilitation Robot via Ant Colony Optimization -PID and Fuzzy-PID Controllers
