ليست عنوان مقالات لاتين Modeling and assessing hydrologic processes for historical and potential land-cover change in the Duoyingping watershed, southwest China Modeling and simulation of productʹs surface design

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Modeling and assessing hydrologic processes for historical and potential land-cover change in the Duoyingping watershed, southwest China

2

Modeling and Assessing the Consequences of Oil Pipeline Leakage Using PHAST Software: A Case Study; Jarahi River in Southwest of Iran

3

Modeling and assimilation of root zone soil moisture using remote sensing observations in Walnut Gulch Watershed during SMEX04

4

Modeling and Automated Containment of Worms

5

Modeling and availability analysis of internet data center with various maintenance policies

6

Modeling and Backstepping-based Nonlinear Control Strategy for a 6 DOF Quadrotor Helicopter

7

Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities

8

Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities

9

Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities

10

Modeling and Biokinetics in Anaerobic Acidogenesis of Starch-Processing Wastewater to Acetic Acid

11

Modeling and broadening temporal user interest in personalized news recommendation

12

Modeling and calculating the effect of treatment at baseline from panel outcomes

13

Modeling and calculation of electromagnetic field in the surroundings of a large power transformer

14

Modeling and calculation of field emission enhancement factor for carbon nanotubes array

15

Modeling and calculation of field emission enhancement factor for carbon nanotubes array

16

Modeling and calculation of open carbon dioxide refrigeration system

17

Modeling and characterization of a bimorph impedance transducer

18

Modeling and characterization of a chemomechanical actuator using protein transporter

19

Modeling and characterization of a radiation sensitive p-channel transistor in a floating n-well

20

Modeling and characterization of a radiation sensitive p-channel transistor in a floating n-well

21

Modeling and Characterization of Air Pollution: Perspectives and Recent Developments with a focus on the Campania Region (Southern Italy)

22

Modeling and characterization of atomically sharp “perfect” Ge/SiO2 interfaces

23

Modeling and characterization of damping in carbon nanofiber/polypropylene composites

24

Modeling and characterization of damping in carbon nanofiber/polypropylene composites

25

Modeling and characterization of dynamic failure of borosilicate glass under compression/shear loading

26

Modeling and characterization of fiber-reinforced (FRP) plastic honeycomb sandwich panels for bridge deck

27

Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications

28

Modeling and characterization of metal droplets generation by using a pneumatic drop-on-demand generator

29

Modeling and characterization of piezoelectric cantilever in fluids at different temperatures

30

Modeling and characterization of polyelectrolyte complex of polyaniline and sulfonated polystyrene produced by palm tree peroxidase

31

Modeling and characterization of sigma-delta analog-to-digital converters

32

Modeling and characterization of strengthened concrete tension members

33

Modeling and Characterization of the 3rd Order Charge-Pump PLL: a Fully Event-driven Approach

34

Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites

35

Modeling and characterization of the magnetocaloric effect in Ni2MnGa materials

36

Modeling and characterization of the polymer stud grid array (PSGA) package: electrical, thermal and thermo-mechanical qualification

37

Modeling and characterization of three kinds of MEMS resonators fabricated with a thick polysilicon technology

38

Modeling and characterization of two-phase composites by Voronoi diagram in the Laguerre geometry based on random close packing of spheres

39

Modeling and characterization of viscoelasticity of PI/SiO2 nanocomposite films under constant and fatigue loading

40

Modeling and classifying color textures using random fields in a random environment

41

Modeling and classifying color textures using random fields in a random environment^

42

Modeling and classifying color textures using random fields in a random environment^

43

Modeling and comparative thermal performance of ground air collector and earth air heat exchanger for heating of greenhouse

44

Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm

45

Modeling and compensating non-uniformity in push-broom NIR hyperspectral imaging system

46

Modeling and Computation of Boundary-Layer Flows – Solutions Manual and Computer Programs: by T. Cebeci and J. Cousteix (Springer-Verlag, Berlin, Germany, 2001, 288 pp.) Euro 94,95 hardcover, ISBN 3-540-41227-1

47

Modeling and computation of cavitation in vortical flow

48

Modeling and computation of fluid–membrane interaction Original Research Article

49

Modeling and Computation of Random Thermal Fluctuations and Material Defects in the Ginzburg–Landau Model for Superconductivity

50

Modeling and computation of two phase geometric biomembranes using surface finite elements

51

Modeling and computational simulation of adsorption based chemical heat pumps

52

Modeling and computer simulation of the identification problem related to the sludge concentration in a settler

53

Modeling and computing throughput capacity of wireless multihop networks

54

Modeling and control approach to a distinctive quadrotor helicopter

55

Modeling and control design for governing hydroelectric turbines with leaky Wicket gates

56

Modeling and control design of a static synchronous series compensator

57

Modeling and control design of hydrogen production process for an active hydrogen/wind hybrid power system

58

Modeling and Control Electric and Heating Sources in a Building Using MPC

59

Modeling and Control for HIV/AIDS Transmission in China Based on Data from 2004 to 2016

60

Modeling and control for nonlinear structural systems via a NN-based approach

61

Modeling and control for thermal balancing of multi-core processors

62

Modeling and control in bioprocesses

63

Modeling and control issues for autonomous aerial refueling for UAVs using a probe–drogue refueling system

64

Modeling and control of a cascaded doubly-fed induction generator based on dynamical equivalent circuits Original Research Article

65

Modeling and control of a direct laser powder deposition process for Functionally Graded Materials (FGM) parts manufacturing

66

Modeling and control of a flexible rotor system with AMB-based sustentation

67

Modeling and control of a flexible solar array paddle as a clamped-free-free-free rectangular plate

68

Modeling and control of a helicopter slung-load system

69

Modeling and control of a mixed-flow rice dryer with emphasis on breakage quality Original Research Article

70

Modeling and Control of a Naphtha Thermal Cracking Pilot Plant

71

Modeling and control of a natural circulation loop

72

Modeling and control of a new horizontal-shaft hybrid-type magnetic bearing

73

Modeling and Control of a Nonlinear Active Suspension Using Multi-Body Dynamics System Software

74

Modeling and Control of a Novel Six-Leg Three-Phase High-Power Converter for Low Voltage Fuel Cell Applications

75

Modeling and control of a PEM fuel cell based hybrid multilevel inverter

76

Modeling and Control of a Photovoltaic Energy System Using the State-Space Averaging Technique

77

Modeling and control of a piezoelectric actuator driven system with asymmetric hysteresis

78

Modeling and control of a pneumatically actuated inverted pendulum

79

Modeling and control of a push–pull converter for photovoltaic microinverters operating in island mode

80

Modeling and control of a semiconductor manufacturing process with an automata network: An example in plasma etch processing

81

Modeling and control of a SOFC-GT-based autonomous power system

82

MODELING AND CONTROL OF A VARIABLE SPEED VARIABLE PITCH ANGLE PROTOTYPE WIND TURBINE

83

Modeling and Control of a Variable-Speed Constant-Frequency Synchronous Generator With Brushless Exciter

84

Modeling and control of a web-fed machine

85

Modeling and control of a wind fuel cell hybrid energy system

86

Modeling and control of a wind turbine driven doubly fed induction generator

87

MODELING AND CONTROL OF ACETYLENE HYDROGENATION PROCESS

88

Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—I. Control-oriented modeling

89

Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—II. Linear and adaptive nonlinear control

90

Modeling and control of an atomic force microscope using a piezoelectric tuning fork for force sensing

91

Modeling and control of an eddy current brake

92

Modeling and control of an industrial pressure screen

93

Modeling and control of an LDPE autoclave reactor

94

Modeling and Control of Autonomous Underwater Vehicle (AUV) In Heading and Depth Attitude via PPD Controller with State Feedback

95

Modeling and control of cement grinding processes

96

Modeling and Control of Compliant Assembly Systems

97

Modeling and Control of Contact Between Constrained Rigid Bodies

98

Modeling and Control of Cooperative Teleoperation Systems

99

Modeling and control of C-UPFC for power system transient studies

100

Modeling and control of DFIG-based variable-speed wind-turbine

101

Modeling and control of discrete event systems using finite state machines with variables and their applications in power grids

102

Modeling and control of distributed generation systems including PEM fuel cell and gas turbine

103

MODELING AND CONTROL OF DISTRIBUTED GENERATION SYSTEMS INCLUDING WIND AND GAS TURBINE ON AZARBAIJAN ELECTRIC NETWORK

104

Modeling and control of distributed thermal systems

105

Modeling and control of expressiveness in music performance

106

Modeling and control of flow problems by adaptation-based linear parameter varying models

107

Modeling and control of formations of nonholonomic mobile robots

108

MODELING AND CONTROL OF GAS TURBINE COMBUSTOR WITH DYNAMIC AND ADAPTIVE NEURAL NETWORKS

109

Modeling and control of hierarchical systems with fuzzy systems

110

Modeling and control of high-throughput screening systems in a max-plus algebraic setting

111

Modeling and control of high-throughput screening systems in a max-plus algebraic setting

112

Modeling and control of HVOF thermal spray processing of WC–Co coatings

113

Modeling and control of hybrid photovoltaic wind power system with battery storage

114

Modeling and control of hysteresis in magnetostrictive actuators

115

Modeling and control of impact in mechanical systems: theory and experimental results

116

Modeling and Control of Linear Two-time Scale Systems: Applied to Single-Link Flexible Manipulator

117

Modeling and control of MEMS with high speed synchronous micromotors and controllers/drivers-on-VLSI-chip Ics

118

Modeling and control of microgrid: An overview

119

MODELING AND CONTROL OF MULTI-LEVEL INVERTER FOR THREE-PHASE GRID-CONNECTED PHOTOVOLTAIC SOURCES

120

Modeling and control of nonlinear micro-distributed systems Original Research Article

121

Modeling and control of nonlinear systems using novel fuzzy wavelet networks: The output adaptive control approach

122

Modeling and Control of Oxygen Transfer in High Purity Oxygen Activated Sludge Process

123

Modeling and control of PEMFC based on least squares support vector machines

124

Modeling and control of physical processes using proper orthogonal decomposition

125

Modeling and control of power flow in a double-beam system

126

Modeling and control of quasi-keyhole arc welding process

127

Modeling and Control of Robot Manipulators [Book Reviews]

128

Modeling and control of robot manipulators: L. Sciavicco and B. Siciliano; Springer, Berlin, 2000, ISBN: 1-85233-221-2

129

Modeling and control of robot manipulators: Lorenzo Sciavicco and Bruno Siciliano; Mc Graw-Hill, New York, 1996, ISBN 0-07-114726-8

130

Modeling and control of thawing phenomena in solute-impregnated frozen foods Original Research Article

131

Modeling and control of the agitation–sedation cycle for critical care patients

132

Modeling and control of the doubly fed induction generator wind turbine

133

Modeling and control of the high damping behavior in Ti–Nb–O alloys

134

Modeling and control of the magnetic suspension system

135

Modeling and Control of Three-Phase Shunt Active Power Filter

136

Modeling and control of two manipulators handling a flexible object

137

Modeling and control of unbalanced three-phase systems containing PWM converters

138

Modeling and control of unified power flow controller for transient stability

139

Modeling and control of unified power flow controller for transient stability

140

Modeling and control of V/f controlled induction motor using genetic-ANFIS algorithm

141

Modeling and Control of Vinyl Chloride in Drinking Water Distribution Systems

142

Modeling and Control of Water Level in Boiler Drum for Nassiriyah Thermal Power Plant

143

Modeling and Control of Welding Flexible Manufacturing Cell Using Petri Net

144

MODELING AND CONTROL OF WIND TURBINE AND FAULT

145

Modeling and control tuning of a hydro station with units sharing a common penstock section

146

Modeling and controllability for a class of hybrid mechanical systems

147

Modeling and Controller Design for a Coupled-Tank Liquid Level System: Analysis and Comparison

148

Modeling and controller design for complex flexible nonlinear systems via a fuzzy singularly perturbed approach

149

Modeling and controller design of a Maglev guiding system for application in precision positioning

150

Modeling and controller design of inner-formation flying system with two proof-masses

151

Modeling and controller performance assessment for a switched reluctance motor drive based on setpoint relay

152

Modeling and controllers design of the China CLEAR-IB

153

Modeling and controlling clarifier–thickeners fed by suspensions with time-dependent properties

154

Modeling and controlling variation propagation in mechanical assemblies using state transition models

155

Modeling and coordinate control of photovoltaic DC building module based BIPV system

156

Modeling and copying human head movements

157

Modeling and correction of soil penetration resistance for varying soil water content

158

Modeling and co-simulation of a parabolic trough solar plant for industrial process heat

159

Modeling and Cost Minimization of Weight Reduction Process of a Polyethylene Terephthalate Fabric by Sodium Hydroxide

160

Modeling and coupling of soil respiration and soil water content in fenced Leymus chinensis steppe, Inner Mongolia

161

Modeling and coupling of soil respiration and soil water content in fenced Leymus chinensis steppe, Inner Mongolia

162

Modeling and cycling control of carbonate fuel cell power plants

163

Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact

164

Modeling and data analysis of a Forbush decrease Original Research Article

165

Modeling and decoding motor cortical activity using a switching Kalman filter

166

Modeling and deformation analyzing of InSb focal plane arrays detector under thermal shock

167

Modeling and deformation characteristics of a circular beam with asymmetric piezoelectric actuators

168

Modeling and design considerations of a photovoltaic energy source feeding a synchronous reluctance motor suitable for pumping systems

169

Modeling and design for electrical performance of wideband flip-chip transition

170

Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini)

171

Modeling and Design of a DiskType Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini)

172

Modeling and design of a fully integrated gas analyzer using a μGC and NEMS sensors

173

Modeling and design of a solar thermal system for hybrid cooking application

174

Modeling and Design of Controllers for Switched Reluctance Motor Based on Asymmetrical -Source Inverters

175

Modeling and Design of DC Boost and AC Side Voltage Controllers in Asymmetrical ?-Source Inverter.

176

Modeling and design of global logistics systems: A review of integrated strategic and tactical models and design algorithms

177

Modeling and design of hydrogen gas sensors based on a membrane-supported surface plasmon waveguide

178

Modeling and design of multi-layered and graded materials

179

Modeling and design of phase shift anti-islanding method using non-detection zone

180

Modeling and design of tape transport mechanism Original Research Article

181

MODELING AND DESIGN OF THERMAL POWER PLANTS USING CONCENTRATED SOLAR POWER SYSTEMS

182

Modeling and design of ultraviolet reactors for disinfection by-product precursor removal Original Research Article

183

Modeling and designing heating and ventilation system with underfloor air distribution

184

Modeling and Designing Indices of Talent Identification in the Field of Basketball Based on Physical‑Motor, Psychological, Anthropometric, and Physiological Parameters

185

Modeling and detecting the stator winding fault of permanent magnet synchronous motors

186

Modeling and detection of damage using smeared crack model

187

Modeling and detection of demagnetization fault in permanent magnet vernier machine using flexible magnetic equivalent circuit method

188

Modeling and determination of heat transfer coefficient in a basin solar still using CFD Original Research Article

189

Modeling and determination of relationship between kernel yield and its related traits in maize inbred lines and their hybrids using multiple regression and path coefficient analysis

190

Modeling and development of a decision support system for supplier selection in the process industry

191

Modeling and development of an ANN-based smart pressure sensor in a dynamic environment

192

Modeling and development of an ANN-based smart pressure sensor in a dynamic environment

193

Modeling and direct simulation of near-field granular flows

194

Modeling and discretization errors in hyperelasto-(visco-)plasticity with a view to hierarchical modeling Original Research Article

195

Modeling and discretization errors in large eddy simulations of hydrodynamic and magnetohydrodynamic channel flows

196

Modeling and distributed gain scheduling strategy for load frequency control in smart grids with communication topology changes

197

Modeling and dose calculations of a pure beta emitting 32P coated stent for intracoronary brachytherapy by Monte Carlo code

198

Modeling and dynamic analysis of a planetary mechanism with an elastic belt

199

Modeling and dynamic assessment of urban economy–resource–environment system with a coupled system dynamics – geographic information system model

200

Modeling and dynamic characteristics analysis on a three-stage fast-response and large-flow directional valve

201

Modeling and dynamic characteristics of spinning Rayleigh beams

202

Modeling and dynamic characteristics of spinning Rayleigh beams

203

Modeling and dynamic control simulation of unitary gas engine heat pump

204

Modeling and Dynamic Properties of a Four-Parameter Zener Model Vibration Isolator

205

Modeling and dynamic simulation of ultraviolet induced growing interfaces

206

Modeling and dynamic simulation of ultraviolet induced growing interfaces

207

Modeling and dynamical analysis of a COVID-19 epidemic model with time-delay

208

Modeling and dynamics analysis of shells of revolution by partially active constrained layer damping treatment

209

Modeling and dynamics of an autothermal JP5 fuel reformer for marine fuel cell applications

210

Modeling and Economic Analysis of MED-TVC Desalination with Allam Power Plant Cycle in Kish Island

211

Modeling and economic evaluation of the integration of carbon capture and storage technologies into coal to liquids plants

212

Modeling and effect of leakages on heat transfer performance of fixed matrix regenerators

213

Modeling and Efficient Control of Microturbine Generation System With Battery Energy Storage for Sensitive Loads

214

Modeling and efficient optimization for object-based scalability and some related problems

215

Modeling and Elimination of Atenolol on Granular Activated Carbon in Fixed Bed Column

216

Modeling and energy efficiency optimization of belt conveyors

217

Modeling and environmental risk assessment of Eastern Alborz Coal washing plant

218

Modeling and Estimating the COVID-19 Incidence and Fatality in Europe

219

Modeling and estimating the jump risk of exchange rates: Applications to RMB

220

Modeling and estimation of ambiguities in linear arrays

221

Modeling and Estimation of Banana Slice Browning during Drying using Artificial Neural Network.

222

Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite

223

Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite

224

Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite

225

Modeling and estimation of rheological properties of food products for manufacturing simulations Original Research Article

226

Modeling and estimation of the cardiac electromechanical activity

227

Modeling and estimation of the natural gas consumption for residential and commercial sectors in Iran

228

Modeling and Estimation Problems for Structured Heterogeneous Populations

229

Modeling and evaluating ecosystem in 1980s and 1990s for American lobster (Homarus americanus) in the Gulf of Maine

230

Modeling and evaluating ecosystem in 1980s and 1990s for American lobster (Homarus americanus) in the Gulf of Maine

231

Modeling and evaluating of typical advanced peer-to-peer botnet

232

Modeling and evaluating the ecosystem of sea-grass beds, shallow waters without sea-grass, and an oxygen-depleted offshore area

233

Modeling and evaluating the effect of forest fire control on the CO2 cycle in Siberia

234

Modeling and Evaluating the Energy Hub Effects on a Price Responsive Load

235

Modeling and evaluating the security threats of transient errors in firewall software

236

Modeling and evaluating the strategic effects of improvement programs on the manufacturing performance using neural networks

237

Modeling and Evaluation of a Policy Provisioning Architecture for Mobile Ad-Hoc Networks

238

Modeling and evaluation of boundary layer resistance at feed in the permeation of VOC/N2 mixtures through PDMS membrane

239

Modeling and evaluation of curved layer fused deposition

240

Modeling and evaluation of information systems using coloured petri network

241

Modeling and Evaluation of Stochastic Discrete-Event Systems with RayLang Formalism

242

Modeling and evaluation of the environmental consequences of fire in atmospheric storage tanks using PHAST software

243

Modeling and evaluation of the filling stage of injection/compression moulding

244

Modeling and evaluation of the filling stage of injection/compression moulding

245

Modeling and evaluation of the indoor power line transmission medium

246

Modeling and evaluation of trust with an extension in semantic web

247

Modeling and Evaluation of Web Services in Mobile Networks Using Stochastic Colored Petri Nets

248

Modeling and Evolutionary Optimization on Multilevel Production Scheduling: A Case Study

249

Modeling and experiment of shuttling speed effects on the OSTRYCH

250

Modeling and experimental analysis of a self-excited six-phase induction generator for stand-alone renewable energy generation

251

Modeling and experimental analysis of polydispersed particles coating in spouted bed

252

Modeling and experimental assessment of Nafion membrane properties used in SO2 depolarized water electrolysis for hydrogen production

253

Modeling and experimental characterization of peak tailing in DNA gel electrophoresis

254

Modeling and Experimental Design for Metabolic Flux Analysis of Lysine-Producing Corynebacteria by Mass Spectrometry

255

Modeling and experimental evaluation of an automotive air conditioning system with a variable capacity compressor

256

Modeling and Experimental Investigation a Solar Tray Dryer with Indirect Forced Convection using Phase Change Materials

257

Modeling and Experimental Investigation of a Variable Speed Drive Water Source Heat Pump

258

Modeling and experimental investigation of accumulators for automotive air conditioning systems

259

Modeling and Experimental Investigation of Laser Drilling with Jet Electrochemical Machining

260

Modeling and experimental investigation of looped separate heat pipe as waste heat recovery facility

261

Modeling and experimental investigation on water-driven steam injector for waste heat recovery

262

Modeling and experimental observation of evaporation from oxidizing molybdenum particles entrained in a thermal plasma jet

263

Modeling and Experimental Prediction of Wastewater Treatment Efficiency in Oil Refineries Using Activated Sludge Process

264

Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement

265

Modeling and experimental studies on single particle coal devolatilization and residual char combustion in fluidized bed

266

Modeling and experimental study of birefringence in injection molding of semicrystalline polymers

267

Modeling and experimental study of CO2 absorption in a hollow fiber membrane contactor

268

Modeling and experimental study of grinding forces in surface grinding

269

Modeling and experimental study of microfiltration using a composite module

270

Modeling and experimental study of nucleate boiling on a vertical array of horizontal plain tubes

271

Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process

272

Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing

273

Modeling and experimental study of the 27-day variation of galactic cosmic-ray intensity for a solar wind velocity depending on heliolongitude Original Research Article

274

Modeling and experimental study of vapor phase-diffusion driven sessile drop evaporation

275

Modeling and experimental study on an innovative passive cooling system—NVP system

276

Modeling and experimental study on multi-level humidifying of the underfeed circulating spouted bed for flue gas desulfurization

277

Modeling and experimental study on performance of inverter air conditioner with variation of capillary tube using R-22 and R-407C

278

Modeling and experimental study on sensing response of an AlGaN/GaN HEMT-based hydrogen sensor

279

Modeling and experimental study on the performance of an inverter air conditioner using R-410A with evaporatively cooled condenser

280

Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells

281

Modeling and Experimental Testing of Asymmetric Information Problems in Lease and Hire Contracts: A Study Based on Contract Theory

282

Modeling and experimental testing of the effect of solvent absorption on the electric properties of styrene butadiene rubber/carbon black chemical sensors

283

Modeling and Experimental Validation for Hammer-Driven Type Penetrators under Horizontal Condition

284

Modeling and experimental validation of a 1.2 MW DC transferred well-type plasma torch Original Research Article

285

Modeling and experimental validation of a greenhouse with evaporative cooling by moving water film over external shade cloth

286

Modeling and experimental validation of H2 gas bubble humidifier for a 50 kW stationary PEMFC system

287

Modeling and experimental validation of internal faults in salient pole synchronous machines including space harmonics Original Research Article

288

Modeling and experimental validation of mass transfer from carbonated beverages in polyethylene terephthalate bottles Original Research Article

289

Modeling and experimental validation of overpotentials of a direct ethanol fuel cell

290

Modeling and experimental validation of sharpening mechanism based on thermal oxidation for fabrication of ultra-sharp silicon nanotips

291

Modeling and experimental validation of solid oxide fuel cell materials and stacks

292

Modeling and experimental validation of the desiccant wheel in a hybrid desiccant air conditioning system

293

Modeling and experimental validation of the dispersion of 222Rn released from a uranium mine ventilation shaft

294

Modeling and experimental validation of the solar loop for absorption solar cooling system using double-glazed collectors

295

Modeling and experimental validation of trabecular bone damage, softening and densification under large compressive strains

296

Modeling and experimental validation of unsteady impinging flames

297

Modeling and experimental verification of dielectric constants for three-dimensional woven composites

298

Modeling and Experimental Verification of Grid Interaction of a DFIG Wind Turbine

299

Modeling and experimental verification of martensitic transformation plastic behavior in carbon steel for quenching process

300

Modeling and experimental verification of partial slip for multiple frictional contact problems

301

Modeling and experimental verification of simultaneous tension and torsion in a cylindrical element with a surface layer

302

Modeling and experimental verification of the 300 mm Ar anneal process

303

Modeling and experimental verification of the kinetics of reacting polymer systems

304

Modeling and experimental verification of the performance of TIRF-sensing systems for oligonucleotide microarrays based on bulk and integrated optical planar waveguides

305

Modeling and experimental verification of thermo-mechanical coupled behavior of face-centered-cubic polycrystals

306

MODELING AND EXPERIMENTAL WORK OF LECTROCHEMICAL TURNING PROCESS

307

Modeling and experimenting combined smart sleep and power scaling algorithms in energy-aware data center networks

308

Modeling and experiments in plasticity

309

Modeling and experiments on energy loss in horizontal connecting pipe of vertical ground source heat pump system

310

Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy

311

Modeling and experiments on the influence of biofilm size and mass transfer in a fluidized bed reactor for anaerobic digestion

312

MODELING AND EXPERT EVALUATION OF SHAPING DURING ROLLING OF A WIDE RANGE OF ALLOY STEELS

313

Modeling and Exploring Multivariate Spatial Variation: A Test Procedure for Isotropy of Multivariate Spatial Data

314

Modeling and fabrication of micro tools by pulsed electrochemical machining

315

Modeling and fault diagnosis of a photovoltaic system

316

Modeling and FE analysis of column to beam end-plate bolted connection

317

Modeling and Finite Difference Numerical Analysis of Reaction-Diffusion Dynamics in a Microreactor

318

Modeling and finite element analysis on GTAW arc and weld pool

319

Modeling and flowsheet simulation of continuous fluidized bed dryers

320

Modeling and forecasting cointegrated relationships among heavy oil and product prices

321

Modeling and forecasting crude oil markets using ARCH-type models

322

Modeling and Forecasting Electricity Prices with Input/Output Hidden Markov Models .

323

Modeling and forecasting extreme hot events in the central Ebro valley, a continental-Mediterranean area

324

Modeling and forecasting from trend-stationary long memory models with applications to climatology

325

Modeling and forecasting industrial end-use natural gas consumption

326

Modeling and forecasting MODIS-based Fire Potential Index on a pixel basis using time series models

327

Modeling and forecasting monthly movement of annual average solar insolation based on the least-squares Fourier-model

328

Modeling and forecasting natural gas demand in Bangladesh

329

Modeling and Forecasting of Bohai Sea Ice

330

Modeling and forecasting of electrical power demands for capacity planning

331

MODELING AND FORECASTING OF ENERGY SCENARIO IN PAKISTAN WITH APPLICATION OF DECENTRALIZED ENERGY PLANNING

332

Modeling and Forecasting of Food Imports in Albania

333

Modeling and Forecasting of Paraffin Settings on an Existing Extractive Fund of Oil Deposits

334

Modeling and forecasting of Turkey’s energy consumption using socio-economic and demographic variables

335

Modeling and forecasting petroleum futures volatility

336

Modeling and Forecasting Primary Commodity Prices, W. Labys. Ashgate Publishing Co., Burlington VT (2006). US $99.95, 235pp., ISBN-13 978-0-7546-4629-7.

337

Modeling and forecasting river flow rate from the Melen Watershed, Turkey

338

Modeling and Forecasting the Electricity Price in Iran Using Wavelet-based GARCH Model

339

Modeling and forecasting tourism demand for arrivals with stochastic nonstationary seasonality and intervention

340

Modeling and forecasting tourist traffic in the Maua and Alba Posse Harbors

341

Modeling and forecasting trend of COVID-19 epidemic in Iran until May 13, 2020

342

Modeling and forecasting U.S. Patent application filings

343

Modeling and forecasting US presidential election using learning algorithms

344

Modeling and Forecasting Volatility of the Malaysian and the Singaporean Stock Indices using Asymmetric GARCH Models and Non-normal Densities

345

Modeling and Formal Verification of IMPP

346

Modeling and Fuzzy Control Strategy Design for the Hydraulic Hybrid Refuse Truck

347

Modeling and generating context-aware agent-based applications with amended colored Petri nets

348

Modeling and generating parallel flexure elements

349

Modeling and generating realistic streaming media server workloads

350

Modeling and genetic algorithm-based multi-objective optimization of the MED-TVC desalination system Original Research Article

351

Modeling and H/sub (infinity)/ control for switched linear parameter-varying missile autopilot

352

Modeling and harmonic suppression for power distribution systems

353

Modeling and heuristics for scheduling of distributed job shops

354

Modeling and Hierarchical Neuro-Fuzzy Control for Flexure-Based Micropositioning Systems

355

Modeling and high-precision control of a ball-screw-driven stage

356

Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO)

357

Modeling and Identification Based On CAN Network Information in Iranian Cars

358

Modeling and identification of an arbitrarily shaped scatterer using dynamic XFEM with cubic splines

359

Modeling and identification of an electromechanical internal combustion engine throttle body

360

Modeling and identification of an electro-mechanical system: The LISA grabbing positioning and release mechanism case Original Research Article

361

Modeling and identification of an electrostatic motor

362

Modeling and Identification of an Industrial Robot for Machining Applications

363

Modeling and identification of freeplay nonlinearity

364

Modeling and identification of frictional forces at a contact interface experiencing micro-vibro-impacts

365

Modeling and identification of induction micromachines in microelectromechanical systems applications

366

Modeling and identification of solar energy water heating system incorporating nonlinearities

367

Modeling and identification of systems with backlash

368

Modeling and identification of Wiener systems with two-segment nonlinearities

369

Modeling and impact of metal accumulation in bottom sediments of wet ponds

370

Modeling and implementation of an artificial electricity market using agent-based technology

371

Modeling and implementation of the vegetable supply chain traceability system

372

Modeling and implementing a real-time scheduler for dual-armed cluster tools

373

Modeling and implementing an agent-based environmental health impact decision support system

374

Modeling and implementing an agent-based system for prediction of protein relative solvent accessibility

375

Modeling and imprint fabrication of an infrared wire-grid polarizer with an antireflection grating structure

376

Modeling and Improvement of Function of Solar Resources using Comparative Multipurpose Algorithm of PSO

377

Modeling and improvement of silicon ingot directional solidification for industrial production systems

378

Modeling and in situ identification of material parameters for layered structures based on carbon nanotube arrays

379

Modeling and inference for troubleshooting with interventions applied to a heavy truck auxiliary braking system

380

Modeling and inference for troubleshooting with interventions applied to a heavy truck auxiliary braking system

381

Modeling and Inferential Thoughts for Consecutive Gap Times Observed with Death and Censoring

382

Modeling and initial assessment of the inter-frequency clock bias for COMPASS GEO satellites Original Research Article

383

Modeling and Intelligent Control of a Robotic Gas Metal Arc Welding System

384

Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles

385

Modeling and intellligent chatter control strategies for a lathe machine

386

Modeling and interactions analysis of the novel antagonist agent flibanserin with 5-hydroxytryptamine 2A (5-HT2A) serotonin receptor as a HSDD treatment in premenopausal women

387

Modeling and interactions analysis of the novel antagonist agent flibanserin with 5-hydroxytryptamine 2A (5-HT2A) serotonin receptor as a HSDD treatment in premenopausal women

388

Modeling and interactions of Aspergillus fumigatus lanosterol 14-α demethylase `Aʹ with azole antifungals Original Research Article

389

Modeling and interpretations by the statistical physics formalism of hydrogen adsorption isotherm on LaNi4.75Fe0.25

390

Modeling and interpreting bioavailability of organic contaminant mixtures in subsurface environments Review Article

391

Modeling and interpreting the seismic-reflection expression of sandstone in an ancient mass-transport deposit dominated deep-water slope environment

392

Modeling and inverse simulation of somersaults on the trampoline

393

Modeling and Investigating Lightning Wave Transfer through Distribution Transformer to Watercraft Power System

394

Modeling and Investigating the Production of Carbon Dioxide Gas Using HSC Software in the Tile Industry

395

Modeling and Investigation of Gas Turbines Heat Recovery in the Semnan Oil Pumping Station for Heating Gas-Oil to Reduce Energy Consumption of Pumping

396

Modeling and investigation of Gulf El-Zayt wind farm for stability studying during extreme gust wind occurrence

397

Modeling and investigation of neural activity in the thalamus

398

Modeling and investigation of submerged fermentation process to produce extracellular polysaccharide using Lactobacillus confusus

399

Modeling and investigation of the channeling phenomenon in downdraft stratified gasifers

400

Modeling and investigation of the wind resource in the gulf of Tunis, Tunisia

401

Modeling and investigation start-up procedures of a combined cycle power plant

402

Modeling and investigation start-up procedures of a combined cycle power plant

403

Modeling and IPC control of interactive mechanical systems: a coordinate-free approach: Stefano Stramigioli; LNCIS 266, Springer, London, 2001, ISBN 1-85233-395-2

404

Modeling and Kinetic Determination in Affinity Precipitation of Trypsin

405

MODELING AND LAYOUT OPTIMIZATION TECHNIQUES FOR SILICON-BASED SYMMETRICAL SPIRAL INDUCTORS

406

Modeling and limits of strength of nanoporous foams

407

Modeling and linguistic knowledge extraction from systems using fuzzy relational models

408

Modeling and machining evaluation of microstructure fabrication by fast tool servo-based diamond machining

409

Modeling and magnetic measurements of TNK synchrotron radiation source magnets

410

Modeling and magnetic measurements of TNK synchrotron radiation source magnets

411

Modeling and Management of Urban Stormwater Runoff Quality: A Review

412

Modeling and managing the evolutionary component of biological systems

413

Modeling and managing the evolutionary component of biological systems

414

Modeling and managing the interactions between hydrology, ecology and economics

415

Modeling and manipulating the structure of hierarchical schemas for the web

416

Modeling and measurement approaches for electrostatic discharge in semiconductor devices and ICs: an overview

417

Modeling and measurement approaches for electrostatic discharge in semiconductor devices and ICs: an overview

418

Modeling and measurement issues have been considered the heart of information technology (IT) productivity paradox problem. By collecting data from seven mortgage firms, this research attempts to shed light on the causal relationships and complementarity

419

Modeling and measurement methodology in consumer perceptions, preference, consideration, and choice behavior

420

Modeling and measurement of aerosol deposition on a heated substrate

421

Modeling and measurement of CO2 solubility in salty aqueous solutions and application in the Erdos Basin

422

Modeling and measurement of flow effects on tracheal sounds

423

Modeling and measurement of granule attrition during pneumatic conveying in a laboratory scale system

424

Modeling and measurement of interfacial area concentration in two-phase flow Original Research Article

425

Modeling and measurement of temperature sensitivity in birefringent photonic crystal holey fibers

426

Modeling and measurement of the wavelength-dependent output properties of quantum-well optical amplifiers: effects of a carrier-dependent escape time

427

Modeling and measurements of a 16-kW turbulent nonadiabatic syngas diffusion flame in a cooled cylindrical combustion chamber

428

Modeling and measurements of solid–liquid and vapor–liquid equilibria of polyols and carbohydrates in aqueous solution Original Research Article

429

Modeling and measurements of soot and species in a laminar diffusion flame

430

Modeling and measurements of the radiative characteristics of high-power (alpha)-DFB lasers

431

Modeling and measurements of water–vapor flow and icing at low pressures with application to pharmaceutical freeze-drying

432

Modeling and measuring double-frequency jitter in one-way master–slave networks

433

Modeling and measuring product development cycle time across industries

434

Modeling and Measuring Productivity in the Agri-Food Sector: Trends, Causes

435

Modeling and measuring the effects of disturbance history and climate on carbon and water budgets in evergreen needleleaf forests

436

Modeling and measuring the effects of imprecision in accident management

437

Modeling and measuring the indoor radon concentrations in high-rise buildings in Hong Kong

438

Modeling and measuring the spatial relation “along”: Regions, contours and fuzzy sets

439

Modeling and mechanical performance of carbon nanotube/epoxy resin composites

440

Modeling and mechanism of the adsorption of copper ion onto natural bamboo sawdust

441

Modeling and mechanism of the adsorption of proton onto natural bamboo sawdust

442

Modeling and microstructural analysis of temperature effects in fused silica viewport

443

Modeling and microstructural characterization of incubation, time-dependent drift and saturation during electromigration in AI-Si-Cu stripes

444

Modeling and microstructural characterization of incubation, time-dependent drift and saturation during electromigration in AI-Si-Cu stripes

445

Modeling and Minimization of Extinction in Volterra–Lotka Type Equations with Free Boundaries

446

Modeling and minimizing process time of combined convective and vacuum drying of mushrooms and parsley Original Research Article

447

Modeling and mining of dynamic trust in complex service-oriented systems

448

Modeling and mitigation of pad scratching in chemical–mechanical polishing

449

Modeling and Model Predictive Control of Composition and Conversion in an ETBE Reactive Distillation Column

450

Modeling and modification of the parallel plate variable MEMS capacitors considering deformation issue

451

Modeling and monitoring for handling nonlinear dynamic processes

452

Modeling and monitoring of construction supply chains

453

Modeling and monitoring of E-commerce workflows

454

Modeling and monitoring of long-term acidification in an upland catchment of the Western Ore Mountains, SE Germany

455

Modeling and monitoring of suspended particulate matter from Badarpur thermal power station, Delhi

456

Modeling and monitoring of the acclimatization of conventional activated sludge to a biohydrogen producing culture by biokinetic control

457

Modeling and Monitoring Social Ntwork in term of Longitudinal Data

458

Modeling and Monitoring Social Ntwork in term of Longitudinal Data

459

Modeling and Monte Carlo simulation of TCDD transport in a river

460

MODELING AND MULTI-OBJECTIVE DESIGN OPTIMIZATION OF QUASI-CONTINUOUS HIGH MAGNETIC FIELD SYSTEMS

461

Modeling and multi-objective exergy based optimization of a combined cycle power plant using a genetic algorithm

462

Modeling and multi-objective optimization of low-frequency vibration-assisted chemical machining using central composite design in response surface methodology

463

Modeling and Multi-Objective Optimization of Operating Parameters in Semi Autogenous Grinding Mill

464

Modeling and multi-objective optimization of parallel flow condenser using evolutionary algorithm

465

MODELING AND MULTI-OBJECTIVE OPTIMIZATION OF STALL CONTROL ON NACA0015 AIRFOIL WITH A SYNTHETIC JET USING GMDH TYPE NEURAL NETWORKS AND GENETIC ALGORITHMS

466

Modeling and multi-response optimization of Inconel 718 on machining of CNC WEDM process

467

Modeling and multivariable active disturbance rejection control of a hydraulic looper multivariable system

468

Modeling and Neuro-fuzzy Controller Design of a Wind Turbine in Full-load Region Based on Operational Data

469

Modeling and nonlinear control of magnetic levitation systems

470

Modeling and nonlinear hunting stability analysis of high-speed railway vehicle moving on curved tracks

471

Modeling and nonlinear parameter estimation with Kronecker product representation for coupled oscillators and spatiotemporal systems

472

Modeling and Non-modeling Genre-based Approach to Writing Argument-led Introduction Paragraphs: A Case of English Students in Iran

473

Modeling and Numerical Analysis in 3D of Anisotropic and Nonlinear Mechanical Behavior of Tournemire Argillite under High Temperatures and Dynamic Loading

474

Modeling and numerical analysis of counter-current dialyzer at steady state

475

Modeling and numerical analysis of fractional-order Bloch equations

476

Modeling and numerical analysis of granite rock specimen under mechanical loading and fire

477

Modeling and Numerical Analysis of Revenue Sharing Contract Based on the Stackelberge Game Theory

478

Modeling and numerical approximation of a 2.5D set of equations for mesoscale atmospheric processes

479

Modeling and numerical investigation of erosion rate for turbulent two-phase gas–solid flow in horizontal pipes

480

Modeling and numerical issues in hyperelasto-plasticity with anisotropy

481

Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm

482

Modeling and Numerical Simulation of a Brushless Permanent-Magnet DC Motor in Dynamic Conditions by Time-Stepping Technique

483

Modeling and numerical simulation of bioheat transfer and biomechanics in soft tissue

484

Modeling and numerical simulation of biotin carboxylase kinetics: Implications for half-sites reactivity

485

Modeling and numerical simulation of linear and nonlinear spacecraft attitude dynamics and gravity gradient moments: A comparative study

486

Modeling and numerical simulation of oscillatory two-phase flows, with application to boiling water nuclear reactors Original Research Article

487

Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach

488

Modeling and numerical simulation of residual stresses and birefringence in injection molded center-gated disks

489

Modeling and numerical simulation of solar chimney power plants

490

Modeling and numerical simulation of the mechanical behavior of woven SiC/SiC regarding a three-dimensional unit cell

491

Modeling and Numerical Solution of the Fate of Multi-component Substrate in Porous Media

492

Modeling and numerical study of actuator and sensor effects for a laminated piezoelectric plate

493

Modeling and numerical treatment of elastic rods with frictionless self-contact

494

Modeling and observations of the north–south ionospheric asymmetry at low latitudes at long deep solar minimum Original Research Article

495

Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer

496

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor

497

Modeling and Optimal Active Control with Delay of the Dynamics of a Strongly Nonlinear Beam

498

Modeling and Optimal Control of 4 Wheel Steering Vehicle Using LQR and its Comparison with 2 Wheel Steering Vehicle

499

Modeling and Optimal Control of a 3-Axis Motion Simulator

500

Modeling and optimal control of a nonlinear dynamical system in microbial fed-batch fermentation

501

Modeling and Optimal Control of a Sport Utility Cable Suspended Robot

502

Modeling and Optimal Control of Batch Processes Using Recurrent Neuro-Fuzzy Networks

503

Modeling and optimal controllers design for a stand-alone photovoltaic-diesel generating unit

504

Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System

505

Modeling and optimal design of cyclic processes for hydrogen purification using hydride-forming metals

506

Modeling and optimal design of evaporative cooling system in controlled environment greenhouse

507

Modeling and optimal design of ground air collector for heating in controlled environment greenhouse

508

Modeling and Optimization for Disassembly Planning

509

Modeling and optimization for microstructural properties of Al/SiC nanocomposite by artificial neural network and genetic algorithm

510

Modeling and Optimization for Piercing Energy Consumption Original Research Article

511

Modeling and optimization for the secondary reaction of FCC gasoline based on the fuzzy neural network and genetic algorithm

512

Modeling and optimization I: Usability of response surface methodology Original Research Article

513

Modeling and optimization II: Comparison of estimation capabilities of response surface methodology with artificial neural networks in a biochemical reaction Original Research Article

514

Modeling and optimization III: Reaction rate estimation using artificial neural network (ANN) without a kinetic model Original Research Article

515

Modeling and Optimization in Early Detection Programs with a Single Exam

516

Modeling and Optimization in VSC-HVDC Transmission Lines in Chemical Industry, A review

517

Modeling and optimization IV: Investigation of reaction kinetics and kinetic constants using a program in which artificial neural network (ANN) was integrated Original Research Article

518

Modeling and optimization of a 1 kWe HT-PEMFC-based micro-CHP residential system

519

Modeling and optimization of a fluidized catalytic cracking process under full and partial combustion modes

520

Modeling and optimization of a hybrid system for the energy supply of a “Green” building

521

Modeling and optimization of a multi-product biosynthesis factory for multiple objectives

522

Modeling and optimization of a non-isothermal two phase flow in the cathode gas diffusion layer of PEM fuel cell

523

Modeling and optimization of a nuclear power plant secondary loop Original Research Article

524

Modeling and optimization of a propeller-type tribocharger for granular materials

525

Modeling and Optimization of a Semi Regenerative Catalytic Reforming of Naphtha in the Presence of Catalyst Coking

526

Modeling and optimization of a sequence of chemical cleaning cycles in dead-end ultrafiltration

527

Modeling and optimization of a solar assisted heat pump using ice slurry as a latent storage material

528

Modeling and optimization of a thermoplastic composites stamping process

529

Modeling and Optimization of a Tri-objective Transportation-Location-Routing Problem considering route reliability: using MOGWO, MOPSO, MOWCA, and NSGA-II

530

Modeling and Optimization of Aloe-Vera Static Shearing by Response Surface Methodology (RSM) and Artificial Neural Network (ANN) Methods

531

Modeling and optimization of an energy generation island based on renewable technologies and hydrogen storage systems

532

Modeling and optimization of an industrial hydrocracker plant

533

Modeling and optimization of an industrial hydrocracking unit to improve the yield of diesel or kerosene

534

Modeling and optimization of an oversaturated signalized network

535

Modeling and Optimization of Anethole Ultrasound-Assisted Extraction from Fennel Seeds using Artificial Neural Network

536

Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology Document Type : Original Research Paper

537

Modeling and Optimization of B-Cyclodextrin Production by Bacillus

538

Modeling and optimization of catalytic partial oxidation methane reforming for fuel cells

539

Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach

540

Modeling and Optimization of Colloidal Nanosilver Pretreatment on Acid-Free Dyeing, Antibacterial, and Hydrophilicity of Polyamide-6,6 Using Response Surface Methodology

541

Modeling and optimization of combined cytostatic and cytotoxic cancer chemotherapy

542

Modeling and optimization of cross-flow ultrafiltration using hybrid neural network-genetic algorithm approach

543

Modeling and optimization of degree of folate grafted on chitosan and carboxymethyl-chitosan

544

Modeling and optimization of designing parameters for a parallel-plain fin heat sink with confined impinging jet using the response surface methodology

545

Modeling and Optimization of Diesel-Natural Gas RCCI Engine Performance, Combustion Noise and Emissions using Response Surface Method

546

Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm

547

Modeling and Optimization of Electrocoagulation Processfor the Removal of Yellow145 dye Based on CentralComposite Design

548

Modeling and optimization of electron linac exit systems for nuclear technologies

549

Modeling and optimization of electron linac exit systems for nuclear technologies

550

Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer

551

Modeling and Optimization of Energy Inputs and Greenhouse Gas Emissions for Eggplant Production Using Artificial Neural Network and MultiObjective Genetic Algorithm

552

Modeling and optimization of existing beam port facility of PSBR

553

Modeling and optimization of fermentative hydrogen production

554

Modeling and optimization of Fischer–Tropsch products hydrocracking

555

Modeling and optimization of Fischer–Tropsch synthesis in the presence of Co (III)/Al2O3 catalyst using artificial neural networks and genetic algorithm

556

Modeling and Optimization of Fixed-Bed Fischer-Tropsch Synthesis Using Genetic Algorithm

557

Modeling and Optimization of Flux Assisted Tungsten Inert Gas Welding Process Using Taguchi Method and Statistical Analysis

558

Modeling and optimization of foam-filled thin-walled columns for crashworthiness designs

559

Modeling and optimization of friction stir welding parameters in joining 5086 H32 aluminium alloy.

560

Modeling and optimization of high chromium alloy wear in phosphate laboratory grinding mill with fuzzy logic and particle swarm optimization technique

561

Modeling and optimization of hollow fiber DCMD module for desalination

562

Modeling and optimization of HVAC energy consumption

563

Modeling and Optimization of Hybrid HIR Drying Variables for Processing of Parboiled Paddy Using Response Surface Methodology

564

Modeling and optimization of hybrid solar thermoelectric systems with thermosyphons

565

Modeling and optimization of hybrid wind–solar-powered reverse osmosis water desalination system in Saudi Arabia

566

Modeling and optimizatıon of hydrocyclone processıng of low grade bentonites

567

Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions

568

Modeling and optimization of InGaAs infrared photovoltaic detectors

569

Modeling and optimization of InGaAs infrared photovoltaic detectors

570

Modeling and optimization of ITO/Al/ITO multilayer films characteristics using neural network and genetic algorithm

571

Modeling and optimization of laser direct structuring process using artificial neural network and response surface methodology

572

Modeling and optimization of lipase-catalyzed synthesis of phytosteryl esters of oleic acid by response surface methodology

573

Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods

574

Modeling and optimization of mechanical behavior of bonded composite–steel single lap joints by response surface methodology

575

Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design

576

Modeling and optimization of membrane lifetime in dead-end ultra filtration

577

Modeling and optimization of microwave devices and circuits using genetic algorithms

578

Modeling and optimization of Multi-Gravity Separator to produce celestite concentrate

579

Modeling and optimization of multi-tubular metal hydride beds for efficient hydrogen storage

580

Modeling and Optimization of Nano-bubble Generation Process Using Response Surface Methodology

581

Modeling and optimization of Nitrate and total Iron removal from wastewater by TiO2/SiO2 nanocomposites

582

Modeling and optimization of oil refinery wastewater chemical oxygen demand removal in dissolved air flotation system by response surface methodology

583

Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design

584

Modeling and optimization of photocatalytic/photoassisted-electro-Fenton like degradation of phenol using a neural network coupled with genetic algorithm

585

Modeling and optimization of polygeneration energy systems

586

Modeling and Optimization of Precipitation Hardening Heat Treatment Factors of the Al2024 Alloy Using a Two-Level Full Factorial Design

587

Modeling and optimization of preparative reversed-phase liquid chromatography for insulin purification

588

MODELING AND OPTIMIZATION OF PROCESS PARAMETERS USING NEURAL NETWORKS AND SIMULATED ANNEALING ALGORITHM FOR ELECTRICAL DISCHARGE MACHINING OF AISI2312 HOT WORKED STEEL

589

Modeling and Optimization of Product Appearance: Application to Injection-Molded Plastic Panels

590

Modeling and optimization of Q-switched double-clad fiber lasers

591

Modeling and optimization of resonant cavity enhanced-separated absorption graded charge multiplication-avalanche photodetector (RCE-SAGCM-APD)

592

Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm

593

Modeling and optimization of short Er/sup 3+/-Yb/sup 3+/ codoped fiber lasers

594

Modeling and optimization of solar thermoelectric generators for terrestrial applications

595

Modeling and optimization of spiral concentrator for separation of ultrafine chromite

596

Modeling and optimization of stencil printing operations: A comparison study

597

Modeling and optimization of supercritical fluid processes

598

Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning

599

Modeling and Optimization of Surface Roughness of AISI2312 Hot Worked Steel in EDM based on Mathematical Modeling and Genetic Algorithm

600

Modeling and optimization of sweeping gas membrane distillation Original Research Article

601

Modeling and optimization of synergistic effect of Cyanex 302 and D2EHPA on separation of zinc and manganese

602

Modeling and optimization of the air system in polymer exchange membrane fuel cell systems

603

Modeling and optimization of the bi-substrate peroxidase-enzyme catalyzed potentiometric assay of hydrogen peroxide by response surface methodology with a central composite rotatable design

604

Modeling and Optimization of the Coagulation–Flocculation Process in Turbidity Removal from Aqueous Solutions Using Rice Starch

605

Modeling and optimization of the combined carbon dioxide reforming and partial oxidation of natural gas Original Research Article

606

Modeling and Optimization of the Condensing Steam Turbine Network of a Chemical Plant

607

Modeling and optimization of the dilute-sulfuric-acid pretreatment of corn stover, poplar and switchgrass

608

Modeling and Optimization of the Drug Extraction Production Process

609

Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm

610

Modeling and Optimization of the Electrochemical Process for Cefixime Removal from Water

611

Modeling and optimization of the growth rate for ZnO thin films using neural networks and genetic algorithms

612

Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method

613

Modeling and optimization of the mixed reforming of methane: Maximizing CO2 utilization for non-equilibrated reaction

614

Modeling and optimization of the molten salt cleaning process

615

Modeling and optimization of the moving granular bed for combined hot gas desulfurization and dust removal

616

Modeling and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts

617

Modeling and optimization of the NOx emission characteristics of a tangentially fired boiler with artificial neural networks

618

Modeling and optimization of the sequential brakeforming processes

619

Modeling and optimization of the supercritical wood impregnation process—Focus on pressure and temperature

620

Modeling and optimization of threading process for shape control in tandem cold rolling

621

Modeling and Optimization of Transmission Schemes in Energy-Constrained Wireless Sensor Networks

622

Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry

623

Modeling and Optimization of Ultrasound Assisted Osmotic Dehydration of Cranberry Using Response Surface Methodology

624

Modeling and optimization of ultrasound-assisted extraction of polyphenolic compounds from Aronia melanocarpa by-products from filter-tea factory

625

Modeling and optimization of ultrasound-assisted extraction of polyphenolic compounds from Aronia melanocarpa by-products from filter-tea factory

626

Modeling and optimization of ultrasound-assisted extraction of polysaccharide from Cucurbita moschata

627

Modeling and Optimization of Ultrasound-Assisted Osmotic Dehydration with Finished Freeze Drying on Black Cherries – The Effect on Antioxidant Activities

628

Modeling and optimization of variable retort temperature (VRT) thermal processing using coupled neural networks and genetic algorithms Original Research Article

629

Modeling and Optimization of Vehicle Suspension Employing a Nonlinear Fluid Inerter

630

Modeling and optimization of voltage and treatment time for electrocoagulation removal of hexavalent chromium Original Research Article

631

Modeling and Optimization of Wind Turbine Driving Permanent Magnet Synchronous Generator

632

Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation

633

Modeling and optimization of wireless local area network

634

Modeling and optimization of zone-based registration considering cell-by-cell location area for mobile communication networks

635

Modeling and optimization process parameters of acid activation of bentonite by response surface methodology

636

MODELING AND OPTIMIZATION RESEARCH FOR DYNAMIC TRANSMISSION PROCESS OF BALISE TELE-POWERING SIGNAL IN HIGH-SPEED RAILWAYS

637

Modeling and optimization studies for a sequential flow based bio-analytical system

638

Modeling and optimization study by response surface methodology on magnesium ions removal from hard water through a biosorbent

639

Modeling and optimization study of industrial n-type high-efficiency back-contact back-junction silicon solar cells

640

Modeling and Optimization: Isomerization Reaction Rate using Response Surface Methodology with Two Kinetic Model Over Bi-Porous Catalysts

641

Modeling and optimizing a sub-centralized LED lamps provision system for rural communities

642

Modeling and optimizing a vendor managed replenishment system using machine learning and genetic algorithms

643

Modeling and Optimizing Aluminum Hydroxide Precipitation Process in Industrial Scale; case study: Iran Alumina Plant

644

Modeling and optimizing bacterial leaching process parameters to increase copper extraction from a low-grade ore

645

Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method

646

Modeling and optimizing irradiance on planar, folded, and honeycomb shapes to maximize photocatalytic air purification

647

Modeling and Optimizing Lead Ions Adsorption by Walnut Shell modified by Sepiolite from Aqueous Solution by Response Surface Methodology

648

Modeling and optimizing of electrochemical oxidation of C.I. Reactive Orange 7 on the Ti/Sb–SnO2 as anode via response surface methodology

649

Modeling and optimizing of factors affecting erosion–corrosion of AA6063–(TiC/Al2O3) hybrid composites by experimental design method

650

Modeling and optimizing of photovoltaic-wind-diesel hybrid systems for electrication of remote villages in Iran

651

Modeling and optimizing of steam pyrolysis of dimethyl formamide by using response surface methodology coupled with Box-Behnken design

652

Modeling and optimizing of steam pyrolysis of dimethyl formamide by using response surface methodology coupled with Box-Behnken design

653

Modeling and optimizing parabolic trough solar collector systems using the least squares support vector machine method

654

Modeling and optimizing passive valve designs for the implantable Gold Micro-Shunt used in glaucoma treatment

655

Modeling and optimizing Random Walk content discovery protocol over mobile ad-hoc networks

656

Modeling and Optimizing the Charge of Electric Vehicles with Genetic ‎Algorithm in the Presence of Renewable Energy Sources

657

MODELING AND OPTIMIZING THE CORROSIVE WEAR OF STEEL BALLS IN BALL GRINDING MILL

658

Modeling and Optimizing the Costs of Electronic Systems

659

Modeling and Optimizing the Hardness of the Melted Zone in Submerged Arc Welding Process using Taguchi Method

660

Modeling and optimizing the performance of a passive direct methanol fuel cell

661

Modeling and optimizing transportation decisions in a manufacturing supply chain

662

Modeling and optimum design of hybrid solid oxide fuel cell-gas turbine power plants

663

Modeling and output tracking of transverse flux permanent magnet machines using high gain observer and RBF Neural network

664

Modeling and parameter analysis of plasma cleaning

665

Modeling and parameter estimation of two-phase endogenous respirograms and COD measurements during aerobic digestion of biological sludge

666

Modeling and parameter identification of a maltodextrin DE 12 drying process in a convection oven

667

Modeling and parameter identification of granular plastomer conglomerate submitted to internal underpressure

668

Modeling and parameter identification of systems with multisegment piecewise-linear characteristics

669

Modeling and parameter optimization of agile beam radar tracking

670

Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming

671

Modeling and parametric studies for thermal performance of an earth to air heat exchanger integrated with a greenhouse

672

Modeling and parametric studies of the effect of inhomogeneity on fission gas release in LWR MOX fuel

673

Modeling and parametric study of a 1 kWe HT-PEMFC-based residential micro-CHP system

674

Modeling and Pareto optimization of gas cyclone separator performance using RBF type artificial neural networks and genetic algorithms

675

Modeling and passivity analysis of nonholonomic Hamiltonian systems with rheonomous affine constraints

676

Modeling and performance analyses of evaporators in frozen-food supermarket display cabinets at low temperatures

677

Modeling and performance analysis for IPv6 traffic with multiple QoS classes

678

Modeling and performance analysis for security aspects

679

Modeling and performance analysis for wireless mobile networks: a new analytical approach

680

Modeling and performance analysis of a hybrid driver model

681

Modeling and performance analysis of a solar desalination unit with double-glass cover cooling

682

Modeling and performance analysis of a solar desalination unit with double-glass cover cooling Original Research Article

683

Modeling and performance analysis of ad hoc broadcasting schemes

684

Modeling and performance analysis of networking and collaborative systems

685

Modeling and performance analysis of QoS-aware load balancing of Web-server clusters

686

Modeling and performance analysis of realizable optical queue with service differentiation capability

687

Modeling and performance analysis of resource allocation strategies for real-time services in UMTS using TIPPtool

688

Modeling and Performance Analysis of Restaurantʹs Service Delivery Process Using Colored Petri Nets

689

Modeling and Performance Characteristics of Nanofiltration by DSPM and ARX Model

690

Modeling and performance evaluation of a cellular mobile network

691

Modeling and Performance Evaluation of a Contract-based Electronic Signature Process

692

Modeling and performance evaluation of a flexure-based XY parallel micromanipulator

693

Modeling and Performance Evaluation of a full scale Petrochemical Waste water Treatment Process

694

MODELING AND PERFORMANCE EVALUATION OF DISTRIBUTED SYSTEMS WITH COORDINATOR

695

Modeling and Performance Evaluation of Energy Consumption in S-MAC Protocol Using Generalized Stochastic Petri Nets

696

Modeling and performance evaluation of ground source (geothermal) heat pump systems

697

Modeling and Performance Evaluation of Supply Chains Using Batch Deterministic and Stochastic Petri Nets

698

Modeling and performance evaluation of transport protocols for firewall control

699

Modeling and performance of a power distribution system for hybrid fiber/coax networks

700

Modeling and performance of a SRM drive with improved ride-through capability

701

Modeling and performance of a static frequency converter starting a 300 MVA synchronous machine

702

Modeling and performance of microscale thermophotovoltaic energy conversion devices

703

Modeling and performance of uncoated microcantilever-based chemical sensors

704

Modeling and Performance of Waste Tires as Media in Fixed Bed Sequence Batch Reactor

705

Modeling and performance prediction for water production in CBM wells of an Eastern India coalfield

706

Modeling and performance study of a beam microgyroscope

707

Modeling and performance study of restoration framework in WDM optical networks

708

Modeling and physical interpretation of photocatalytic oxidation efficiency in indoor air applications

709

Modeling and predicting buildingʹs energy use with artificial neural networks: Methods and results

710

Modeling and predicting emerging inference-based decisions in complex and ambiguous legal settings

711

Modeling and predicting microstructure evolution in lead/tin alloy via correlation functions and stochastic material reconstruction Original Research Article

712

Modeling and predicting non-isothermal microbial growth using general purpose software

713

Modeling and predicting of surface roughness for generating grinding gear

714

Modeling and predicting solubility of n-alkanes in water

715

Modeling and predicting spoilage of cooked, cured meat products by multivariate analysis

716

Modeling and predicting the Henryʹs law constants of methyl ketones in aqueous sodium sulfate solutions with artificial neural network

717

Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach

718

Modeling and Predicting the Survival of Breast Cancer Patients via Deep Neural Networks and Bayesian Algorithm

719

Modeling and predicting trends of heat stress based on climate change phenomenon: A case study in a semi-arid climate

720

Modeling and prediction (correction) of partition coefficients of bile acids and their derivatives by multivariate regression methods

721

Modeling and prediction by using WHIM descriptors in QSAR studies: submitochondrial particles (SMP) as toxicity blosensors of chlorophenols

722

Modeling and prediction by using whim descriptors in QSAR studies: toxicity of heterogeneous chemicals on Daphnia magna

723

Modeling and prediction for multivariate spatial factor analysis

724

Modeling and prediction of activity coefficient ratio of electrolytes in aqueous electrolyte solution containing amino acids using artificial neural network

725

Modeling and prediction of bulk properties of open-cell carbon foam

726

Modeling and prediction of C dynamics in soil chronosequences of the critical zone observatory (CZO) Marchfeld/Austria

727

Modeling and prediction of distribution system voltage distortion caused by nonlinear residential loads

728

Modeling and prediction of driver behavior by foot gesture analysis

729

Modeling and prediction of extraction profile for microwave-assisted extraction based on absorbed microwave energy

730

Modeling and Prediction of FRP Composite Cylinder tubes Crashworthiness Characteristics

731

Modeling and prediction of geothermal reservoir temperature behavior using evolutionary design of neural networks

732

Modeling and prediction of hybrid-coded variable bit rate video sources in fuzzy logic perspectives

733

Modeling and prediction of long-term performance of solar stills

734

Modeling and prediction of molecular properties. Theory of grid-weighted holistic invariant molecular (G-WHIM) descriptors

735

Modeling and prediction of multivariate space–time random fields

736

Modeling and prediction of photolysis half-lives of polycyclic aromatic hydrocarbons in aerosols by quantum chemical descriptors

737

Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method

738

Modeling and Prediction of the Dynamic Behaviour of Microbeams Under Electrostatic Load

739

Modeling and prediction of the effective thermal conductivity of random open-cell porous foams

740

Modeling and prediction of time-series of monthly copper prices

741

Modeling and prediction of Turkey’s electricity consumption using Artificial Neural Networks

742

Modeling and prediction of Turkey’s electricity consumption using Support Vector Regression

743

Modeling and predictions of solid–liquid equilibria for citalopram oxalate as a representative of a solid solution forming system

744

Modeling and preparation of activated carbon for methane storage I. Modeling of activated carbon characteristics with neural networks and response surface method

745

Modeling and preparation of activated carbon for methane storage II. Neural network modeling and experimental studies of the activated carbon preparation

746

Modeling and pricing long memory in stock market volatility

747

Modeling and pricing of block flexible electricity contracts

748

Modeling and Prioritizing Ecotourism Potential in National Park and Protected Area of Sarigol with Fuzzy-AHP in GIS

749

Modeling and probabilistic design optimization of a nanofiber-enhanced composite cylinder for buckling

750

Modeling and Process Analysis of a Biomass Gasifier-Molten Carbonate Fuel Cell-Gas Turbine-Steam Turbine Cycle as a Green Hybrid Power Generator

751

Modeling and process disturbance detection of autocorrelated data Original Research Article

752

Modeling and process simulation of controlled microwave heating of foods by using of the resonance phenomenon

753

Modeling and processing of functionally graded materials for rapid prototyping

754

Modeling and Product Grade Optimization of Fischer-Tropsch Synthesis in a Slurry Reactor

755

Modeling and Production of High Strength Al Strips by Equal Channel Multi Angular Pressing Method

756

MODELING AND PROJECTION OF FISH SUPPLY AND DEMAND IN MALAYSIA, 2000-2020

757

Modeling and prospects for a solid-state quantum computer

758

Modeling and protection of a three-phase power transformer using wavelet packet transform

759

Modeling and qualitative analysis of continuous-time neural networks under pure structural variations Original Research Article

760

Modeling and quality assessment of halftoning by error diffusion

761

Modeling and querying approximate direction relations

762

Modeling and querying fuzzy spatiotemporal databases

763

Modeling and querying graphical representations of statistical data

764

Modeling and random vibration analysis of SDOF systems with asymmetric hysteresis

765

Modeling and Rating Financial Soundness Indicators of Commercial Banks Using Confirmatory Factor Analysis and TOPSIS method

766

Modeling and real time mapping of phases during GTA welding of 1005 steel

767

Modeling and real time mapping of phases during GTA welding of 1005 steel

768

Modeling and real-time cartesian impedance control of 3-DOF robotic arm in contact with the surface

769

Modeling and real-time fault identification in transformers

770

Modeling and Real-Time Prediction of Classical Swine Fever Epidemics

771

Modeling and Reasoning over Distributed Systems using Aspect-Oriented Graph Grammars

772

Modeling and Reasoning with Bayesian Networks, A. Darwiche. Cambridge (2009)

773

Modeling and recognition of cursive words with hidden Markov models

774

Modeling and reducing edge effects in laser bending

775

Modeling and reduction of shocks on electronic components within a projectile

776

Modeling and Rendering Escher-Like Impossible Scenes

777

Modeling and Rendering of Heterogeneous Granular Materials: Granite Application

778

Modeling and rendering of points with local geometry

779

Modeling and retrieving images by content

780

Modeling and Rietveld-Refinement of the Crystal Structure of Bi4Ta2O11Based on That of Bi7Ta3O18

781

Modeling and Robust Control of a 5 DOF Model for Rowing Motion by Inverse Dynamics Method

782

Modeling and robust control of worm-gear driven systems

783

Modeling and Scale-Up of Mixing- and Temperature-Sensitive Chemical Reactions

784

Modeling and Scale-up of Sitosterol Hydrogenation Process: From Laboratory Slurry Reactor to Plant Scale

785

Modeling and scaling of the impulse turbine for wave power applications

786

Modeling and scheduling a case of flexible flowshops: Total weighted tardiness minimization

787

Modeling and Scheduling No-idle Hybrid Flow Shop Problems

788

Modeling and Scheduling No-idle Hybrid Flow Shop Problems

789

Modeling and scheduling of ratio-driven FMS using unfolding time Petri nets

790

Modeling and Scheduling Optimization for Bulk Ore Blending Process Original Research Article

791

Modeling and Scheduling University Course Timetabling Problems

792

Modeling and segmentation of floating foreground and background in videos

793

Modeling and seismic response of structures with concrete rocking columns and viscous dampers

794

Modeling and sensitivity analysis of a pneumatic vibration isolation system with two air chambers

795

Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000

796

Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000

797

Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000

798

Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000*1

799

Modeling and sensitivity analysis of multibody systems using new solid, shell and beam elements Original Research Article

800

Modeling and sensitivity analysis of neural networks Original Research Article

801

Modeling and sharing geographic data with INTERLIS

802

Modeling and simulating combustion and generation of NOx

803

Modeling and simulating coverage in sensor networks

804

Modeling and Simulating Dynamics of Missiles with Deflectable Nose Control

805

Modeling and simulating motions of human bodies in a futuristic distributed tele-immersive collaboration system for synthesizing transient input traffic

806

Modeling and simulating of the fast roll casting process

807

Modeling and simulating Poisson processes having trends or nontrigonometric cyclic effects

808

Modeling and Simulation a Catalytic Fixed Bed Reactor to Produce Ethyl Benzene from Ethanol

809

Modeling and simulation for damage analysis of intelligent, self-reconfigurable ship fluid systems in early design phase

810

Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior

811

Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior

812

Modeling and simulation for performance estimation of open distributed energy management systems

813

Modeling and simulation for the field emission of carbon nanotubes array

814

Modeling and simulation gas separation by membrane of poly dimethyl siloxane

815

Modeling and simulation gas separation by membrane of poly dimethyl siloxane

816

Modeling and simulation in the production process control and material property calculation of complex structured EB-PVD TBCs

817

Modeling and simulation of 1 MWe solar tower plant’s solar flux distribution on the central cavity receiver

818

Modeling and Simulation of 3-Phase Voltage and Current Source Inverter using MATLAB/SIMULINK for Various Loads

819

Modeling and simulation of 5-axis milling processes

820

Modeling and Simulation of 6DOF Robot Manipulators with Tactile Position-Force Control

821

Modeling and simulation of a 100 kWe HT-PEMFC subsystem integrated with an absorption chiller subsystem

822

Modeling and Simulation of a 12 MW Wind Farm

823

Modeling and simulation of a class of coupled thermo-chemo-mechanical processes in multiphase solids Original Research Article

824

Modeling and simulation of a cycloconverter drive system for harmonic studies

825

Modeling and simulation of a direct methanol fuel cell anode

826

Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification

827

Modeling and simulation of a double auction artificial financial market

828

Modeling and simulation of a downdraft biomass gasifier 1. Model development and validation

829

Modeling and simulation of a freight train brake system

830

Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit

831

Modeling and Simulation of a Gasoline-Electric Vehicle

832

Modeling and simulation of a grid connected PV system based on the evaluation of main PV module parameters

833

Modeling and simulation of a grid-connected PV generation system for electromagnetic transient analysis

834

Modeling and simulation of a hybrid actuator

835

Modeling and simulation of a hybrid dynamic system used in haptic interfaces Original Research Article

836

Modeling and simulation of a hydrostatic transmission with variable-displacement pump Original Research Article

837

Modeling and Simulation of a Jumping Four-legged Robot on Staircases

838

Modeling and simulation of a MOSFET gas sensor with platinum gate for hydrogen gas detection

839

Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell

840

Modeling and simulation of a new Bridgeless SEPIC power factor correction circuit

841

Modeling and simulation of a PEM fuel cell stack considering temperature effects

842

Modeling and simulation of a root-zone heating in greenhouse using solar collectors

843

Modeling and Simulation of a Side-Port Regenerative Glass Furnace

844

Modeling and simulation of a simple glass window

845

Modeling and simulation of a single direct carbon fuel cell

846

Modeling and simulation of a SMB chromatographic process designed for enantioseparation

847

Modeling and simulation of a solar powered two bed adsorption air conditioning system

848

Modeling and Simulation of a Spherical Mobile Robot

849

Modeling and simulation of a stand-alone photovoltaic system using an adaptive artificial neural network: Proposition for a new sizing procedure

850

MODELING AND SIMULATION OF A TRAFFIC FLOW MODEL CONSIDERING THE INFLUENCE OF TRAFFIC INTERRUPTION

851

Modeling and simulation of absorption–desorption cyclic processes for hydrogen storage-compression using metal hydrides

852

Modeling and simulation of ac–dc buck-boost converter fed dc motor with uniform PWM technique

853

Modeling and Simulation of Acoustic Signal Transmission Losses in Shallow Water Channels Using Neural Networks

854

Modeling and simulation of active suspensions containing large numbers of interacting micro-swimmers

855

Modeling and simulation of aerial refueling by finite element method

856

Modeling and Simulation of Alternative Injections of CO2 and Water into Porous Carbonate Formations

857

Modeling and simulation of AlxGayIn1−x−yAs/InP quaternary structure for photovoltaic

858

Modeling and simulation of an activated carbon-based botanical air filtration system for improving indoor air quality

859

Modeling and simulation of an activated carbon–CO2 four bed based adsorption cooling system

860

Modeling and simulation of an impact test using wavelets, analytical solutions and finite elements

861

Modeling and Simulation of an Industrial Fluid Catalytic Cracking Riser Reactor Using a Lump-Kinetic Model for a Distinct Feedstock

862

Modeling and simulation of an industrial secondary reformer reactor in the fertilizer plants

863

Modeling and simulation of an integrated multi-shell fixed bed membrane reactor with well-mixed catalyst pattern for production of styrene and cyclohexane

864

Modeling and simulation of an oilseed meal desolventizing process Original Research Article

865

Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle- Fluid Dynamics (CPFD) Approach

866

Modeling and simulation of asphaltene precipitation by normal pressure depletion

867

Modeling and simulation of asymmetrical three-roll bending process

868

Modeling and simulation of autonomous underwater vehicles: design and implementation

869

Modeling and simulation of buckling of embedded carbon nanotubes

870

Modeling and simulation of butanol separation from aqueous solutions using pervaporation

871

Modeling and simulation of carbon black synthesis in an aerosol flame reactor

872

Modeling and simulation of catalytic partial oxidation of methane to synthesis gas by using a plasma-assisted gliding arc reactor

873

Modeling and simulation of C-E deep bowl pulverizer

874

Modeling and simulation of cell populations interaction

875

Modeling and simulation of cement clinkering process with compact internal burning of carbon

876

Modeling and simulation of cement hydration kinetics and microstructure development Review Article

877

Modeling and simulation of centerless grinding of ball bearings

878

Modeling and simulation of circulating fast fluidized bed reactors and circulating fast fluidized bed membrane reactors for production of hydrogen by oxidative reforming of methane

879

Modeling and simulation of circulating fluidized bed reactor with catalytic ozone decomposition reaction

880

Modeling and Simulation of Claus Unit Reaction Furnace

881

Modeling and simulation of clean fuel production by Enterobacter cloacae IIT-BT 08

882

Modeling and simulation of co-gasification of coal and petcoke in a bubbling fluidized bed coal gasifier

883

Modeling and simulation of cogeneration nuclear power plant for seawater desalination

884

Modeling and simulation of combined gas turbine engine and heat pipe system for waste heat recovery and utilization

885

Modeling and simulation of combined pyrolysis and reduction zone for a downdraft biomass gasifier

886

Modeling and Simulation of Common Mode Voltage in a Three-Phase Delta Connection STATCOM with Parasitic Capacitors

887

Modeling and simulation of communication systems: an overview

888

Modeling and simulation of compressed air storage in caverns: A case study of the Huntorf plant

889

MODELING AND SIMULATION OF CONDENSED SULFUR IN CATALYTIC BEDS OF CLAUS PROCESS: RAPID ESTIMATION

890

Modeling and simulation of consumer response to dynamic pricing with enabled technologies

891

Modeling and simulation of corporate lifecycle using system dynamics

892

Modeling and simulation of corrosion product activity in pressurized water reactors under power perturbations

893

Modeling and simulation of coupled nuclear heat energy deposition and transfer in the fuel assembly of the Ghana Research Reactor-1 (GHARR-1)

894

Modeling and simulation of curing kinetics for the cardanol-based vinyl ester resin by means of non-isothermal DSC measurements

895

Modeling and simulation of cylindrical electro-chemical magnetic abrasive machining of AISI-420 magnetic steel

896

Modeling and simulation of damage in elastomer structures at high strains

897

Modeling and simulation of data transmission on a hybrid fiber coax cable network

898

Modeling and Simulation of DC Electric Railway System with Regenerative Braking: A Case Study of Isfahan Metro Line 1

899

Modeling and simulation of DC motors in dynamic conditions allowing for the armature reaction

900

Modeling and simulation of deadbeat-based PI controller in a single-phase H-bridge inverter for stand-alone applications

901

Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture

902

Modeling and simulation of deformation of hydrogels responding to electric stimulus

903

Modeling and simulation of desiccant wheel for air conditioning

904

Modeling and Simulation of Diimide Hydrogenation of Nitrile Butadiene Rubber Latex

905

Modeling and simulation of direct output current control for LCL-interfaced grid-connected inverters with parallel passive damping

906

Modeling and simulation of directional hardening in metals during non-proportional loading

907

Modeling and simulation of dissolved lead in groundwater influenced by porosity and seepage velocity in homogeneous formation

908

Modeling and Simulation of Distillation of a Binary Non-Reacting Mixture Using Rate-Based Approach in Packed Column under Total Reflux

909

Modeling and simulation of distributed systems and networks

910

Modeling and simulation of drug release from multi-layer biodegradable polymer microstructure in three dimensions

911

Modeling and simulation of drying operations in PVC powder production line: Experimental and theoretical study of drying kinetics on particle scale

912

Modeling and simulation of effective forces in the manipulation of cylindrical nanoparticles in a liquid medium

913

Modeling and simulation of electric machines, converters and systems

914

Modeling and simulation of electrification delivery in functionalized textiles in electromagnetic fields

915

Modeling and simulation of electronic structure, material interface and random doping in nano-electronic devices

916

Modeling and simulation of entric -virus transport in deltaic environment rivers state of Nigeria

917

Modeling and simulation of enzymatic membrane reactor for kinetic resolution of ibuprofen ester

918

Modeling and simulation of equation of state for nonadditive hard disk mixtures

919

Modeling and simulation of evaporation–pyrolysis processes of a naturally smoldering cylindrical cellulosic materials rod: Effect of smoldering rate on product concentrations

920

Modeling and Simulation of Fed-Batch Protein Refolding Process

921

Modeling and Simulation of Finite State Machine Memory Built-in Self Test Architecture for Embedded Memories

922

Modeling and Simulation of FIR Filters and Comparison of Frequency Response in Time Domain and Frequency Domain for UMTS

923

Modeling and simulation of fire spreading through the activity tracking paradigm

924

Modeling and simulation of fire spreading through the activity tracking paradigm

925

Modeling and simulation of fish-like swimming

926

Modeling and simulation of flexible needles

927

Modeling and simulation of flexible slider-crank mechanism with clearance for a closed high speed press system

928

Modeling and simulation of FPGA-based variable-speed drives using Simulink Original Research Article

929

Modeling and simulation of galvanic corrosion pit as a moving boundary problem

930

Modeling and simulation of gene regulation and metabolic pathways

931

Modeling and simulation of genetic algorithm using meta-models

932

Modeling and simulation of GPR wave propagation through wet snowpacks: Testing the sensitivity of a method for snow water equivalent estimation

933

Modeling and simulation of grain growth in Si3N4. III. Tip shape evolution Original Research Article

934

Modeling and simulation of gravitational solid–solid separation for optimum performance

935

Modeling and simulation of grid-connected photovoltaic energy conversion systems

936

Modeling and Simulation of Hamburger Cooking Process Using Finite Difference and CFD Methods

937

Modeling and simulation of heat transfer phenomena during investment casting

938

Modeling and Simulation of Heat Transfer Phenomenon in Steel Belt Conveyer Sulfur Granulating Process

939

Modeling and simulation of HgCdTe based p+–n–n+ LWIR photodetector

940

Modeling and simulation of high speed sliding

941

Modeling and simulation of hydraulic buffering valve for power-shift transmission

942

Modeling and Simulation of Hydraulic Roll Bending System Based on CMAC Neural Network and PID Coupling Control Strategy Original Research Article

943

Modeling and simulation of hydrogen combustion in engines

944

Modeling and simulation of hydrogen generation from high-temperature and low-temperature water gas shift reactions

945

Modeling and simulation of IEEE 802.11 WLAN mobile ad hoc networks using topology broadcast reverse-path forwarding (TBRPF)

946

Modeling and simulation of inertial drop break-up in a turbulent pipe flow downstream of a restriction

947

Modeling and simulation of inorganic shell and tube membranes for vapor permeation

948

Modeling and Simulation of Interfacial Turbulent Flows

949

Modeling and Simulation of Ionic Currents in Three-Dimensional Microfluidic Devices with Nanofluidic Interconnects

950

Modeling and simulation of irradiation effects on martensitic transformations in shape memory alloys Original Research Article

951

Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors

952

Modeling and Simulation of Kuhni Extraction Column Using a Rate-based Model

953

Modeling and simulation of large scale hydrogen production

954

Modeling and simulation of large-scale ductile fracture in plates and shells

955

Modeling and simulation of large-scale ductile fracture in plates and shells

956

Modeling and simulation of Li-ion conduction in poly(ethylene oxide)

957

Modeling and simulation of liquid pulsed particulate fluidized beds

958

Modeling and simulation of load heating in heat treatment furnaces

959

Modeling and simulation of long-wave infrared InAs/GaSb strained layer superlattice photodiodes with different passivants

960

Modeling and simulation of loose spring skirt damping and control of vibrations in a multi-segment hanging cantilever Original Research Article

961

Modeling and simulation of low-cycle fatigue life of steel reinforcing bars using artificial neural network

962

Modeling and simulation of magnetic-shape-memory polymer composites

963

Modeling and simulation of maintenance operations at Kuwait public transport company

964

Modeling and Simulation of Manufacturing Systems and Extended Enterprises

965

Modeling and simulation of martensitic phase transitions with a triple point

966

Modeling and simulation of materials synthesis: Chemical vapor deposition and infiltration of pyrolytic carbon

967

Modeling and simulation of matrix converter/induction motor drive Original Research Article

968

Modeling and simulation of mechanical properties of nano-particle filled materials

969

Modeling and simulation of membrane bioreactors by incorporating simultaneous storage and growth concept: an especial attention to fouling while modeling the biological process Original Research Article

970

Modeling and simulation of metabolic networks for estimation of biomass accumulation parameters Original Research Article

971

Modeling and simulation of methane steam reforming in a thermally coupled membrane reactor

972

MODELING AND SIMULATION OF MHD CONVECTIVE HEAT TRANSFER OF CHANNEL FLOW HAVING A CAVITY

973

Modeling and simulation of microwave double absorption on methanol steam reforming for hydrogen production

974

Modeling and simulation of mid-IR amplifying characteristics of Tm3+-doped chalcogenide Photonic Crystal Fibers

975

Modeling and simulation of mixed-signal electronic designs - Enabling analog and discrete subsystems to be represented uniformly within a single framework

976

Modeling and Simulation of Modern Industrial Screens using Discrete Element Method

977

Modeling and simulation of multicellular tumor growth using a nonlinear matter wave equation

978

Modeling and Simulation of Multilevel Inverters used in Hybrid Systems (PV/Wind) Connected to Smart Grid

979

Modeling and simulation of multiple impacts of falling rigid bodies

980

Modeling and simulation of muscle forces of trans-tibial amputee to study effect of prosthetic alignment

981

Modeling and simulation of net energy gain by dark fermentation

982

Modeling and simulation of next-generation multimode fiber links

983

Modeling and simulation of nitrogen regulation in Corynebacterium glutamicum Original Research Article

984

Modeling and simulation of nonsolvent vapor-induced phase separation

985

Modeling and Simulation of Olefin Polymerization at Microstructure Level

986

Modeling and simulation of osmotic pressure controlled electro-ultrafiltration in a cross-flow system

987

Modeling and simulation of partial deposition of phosphorous and heavy metal influenced by permeability and void ratio in soil and water in Oyigbo, rivers state of Nigeria

988

Modeling and Simulation of Partial Oxidation of Methanol to Formaldehyde on FeO/MoO3 Catalyst in a Catalytic Fixed Bed Reactor

989

Modeling and simulation of performance analysis for a cluster-based Web server

990

Modeling and simulation of petroleum coke calcination in rotary kilns

991

Modeling and simulation of photonic devices by generalized space mapping technique

992

Modeling and simulation of photovoltaic (PV) system during partial shading based on a two-diode model

993

Modeling and simulation of piezocomposites Original Research Article

994

Modeling and simulation of pit chemistry of 304 austenitic stainless steel under applied stress in sodium chloride solution

995

Modeling and simulation of plasma jet by lattice Boltzmann method

996

Modeling and simulation of point-non-point source effluent trading in Taihu Lake area: perspective of non-point sources control in China

997

Modeling and simulation of pollutants transport in rivers

998

Modeling and simulation of polyhydroxybutyrate production by Protomonas extorquens in fed-batch culture

999

Modeling and Simulation of Pressure Equalization Step Between a Packed Bed and an Empty Tank in Pressure Swing Adsorption Cycles

1000

Modeling and simulation of productʹs surface design

بازگشت