بر اساس عنوان

1
Development of a fiber coating based on molecular sol–gel imprinting technology for selective solid-phase micro extraction of caffeine from human serum and determination by gas chromatography/mass spectrometry Original Research Article
2
Development of a fiber-in-tube microextraction protocol for gas chromatography–electron capture detection of hexachlorocyclohexanes in water samples Original Research Article
3
Development of a fiber-optic sensor based on surface plasmon resonance on silver film for monitoring aqueous media
4
Development of a fibre-optic sensor for partial discharges in oil-filled power transformers
5
Development of a Field Bioassay for the Side Effects of Pesticides on Decomposition
6
Development of a field test for evaluating aerobic fitness in middle-aged adults: Validity of a 15-m incremental shuttle walk and run test
7
Development of a field well head safety system for use with radiation generating devices
8
Development of a field-level geographic information system
9
Development of a field-portable fluorometer based on deep ultraviolet LEDs for the detection of phenanthrene- and tryptophan-like compounds in natural waters
10
Development of a FI-HG-ICP-OES solid phase preconcentration system for inorganic selenium speciation in Argentinean beverages
11
Development of a filled resin system for the TF coils of ITER
12
Development of a filter for operation of atmospheric Cherenkov telescopes close to the Moon
13
Development of a filter for operation of atmospheric Cherenkov telescopes close to the Moon
14
Development of a Finger Painting-Based Creativa Module for Writing Beginnings for Children with Attention Deficit Hyperactive Disorders
15
Development of a fingerprint of Salvia miltiorrhiza Bunge by high-performance liquid chromatography with a coulometric electrode array system
16
Development of a Finite Element Methodology for Flexible Track Models in Railway Dynamics Applications
17
Development of a finite element model for the identification of mechanical and piezoelectric properties through gradient optimisation and experimental vibration data
18
Development of a finite element simulation framework for the prediction of residual stresses in large welded structures
19
Development of a Finite Element Simulator for Crustal Deformation with Large Fault Slipping
20
Development of a finite element solution for the unsteady Navier–Stokes equations using projection method and fractional-θ-scheme Original Research Article
21
Development of a finite element solution module for the analysis of the dynamic behavior and balancing effects of an induction motor system
22
Development of a finite volume contact solver based on the penalty method
23
Development of a finite-element analysis methodology for the propagation of delaminations in composite structures
24
Development of a FINS- based method for the identification of skates species of commercial interest
25
Development of a Fire Safety Checklist for Dormitories
26
Development of a fish emulsion product (Pla Yor)
27
Development of a fish in vitro cell culture model to investigate oxidative stress and its modulation by dietary vitamin E
28
Development of a fish-based index (FBI) of biotic integrity for French lakes using the hindcasting approach
29
Development of a fish-based index to assess the ecological quality of transitional waters: The case of French estuaries
30
Development of a fish-based multimetric index to assess the ecological quality of marine habitats: the Marine Fish Community Index
31
Development of a Fissile Materials Irradiation Capability for Advanced Fuel Testing at the MIT Research Reactor
32
Development of a Five-axis Milling Tool Path Generation Algorithm based on Faceted Models
33
Development of a five-axis postprocessor system with a nutating head
34
Development of a fixed-bed continuous-flow high-throughput reactor for long-chain n-alkane hydroconversion Original Research Article
35
Development of a flashlamp-pumped Cr:LiSAF laser operating at 30 Hz
36
Development of a flat membrane based device for electromembrane extraction: A new approach for exhaustive extraction of basic drugs from human plasma
37
Development of a flexible high-speed EDM technology with geometrical transform optimization
38
Development of a flexible MAPMT photon-counting read-out system
39
Development of a flexible MAPMT photon-counting read-out system
40
Development of a flexible visualization tool
41
Development of a flexural plate-wave (FPW) immunoglobulin-E (IgE) allergy bio-sensing microsystem
42
Development of a flight simulator for the control of plasma discharges
43
Development of a Flooded Forest Anthropization Index (FFAI) applied to Amazonian areas under pressure from different human activities
44
Development of A Flow Amperometric Enzymatic Method for the Determination of Total Glucosinolates in Real Samples
45
Development of a flow cytometric, non-radioactive cytotoxicity assay in Eisenia fetida: An in vitro system designed to analyze immunosuppression of natural killer-like coelomocytes in response to 7, 12 dimethylbenz[a]anthracene (DMBA)
46
Development of a flow injection analysis (FIA) immunosensor for the detection of Escherichia coli
47
Development of a flow injection analysis method for the determination of acrylamide copolymers in brines
48
Development of a Flow Injection Capillary Chemiluminescent ELISA Using an Imprinted Polymer Instead of the Antibody
49
Development of a flow manifold for Fe(III) ion determination with a fluoride ion-selective electrode
50
Development of a flow method for the determination of phosphate in estuarine and freshwaters—Comparison of flow cells in spectrophotometric sequential injection analysis Original Research Article
51
Development of a Flow Model for the Design of a Momentum Type Beet Mass Flow Sensor
52
Development of a flow solver using the adaptive Cartesian mesh algorithm for wind environment assessment
53
Development of a flow solver using the adaptive Cartesian mesh algorithm for wind environment assessment
54
Development of a flow system for the determination of cadmium in fuel alcohol using vermicompost as biosorbent and flame atomic absorption spectrometry
55
Development of a flow-injection liposome immunoanalysis system for fumonisin B1 Original Research Article
56
Development of a flowsheet for iodine–sulfur thermo-chemical cycle based on optimized Bunsen reaction
57
Development of a flow-through enzyme-linked immunosorbent assay and a dipstick assay for the rapid detection of the insecticide carbaryl Original Research Article
58
Development of a flow-through system for cleaning and dissolving foraminiferal tests
59
Development of a fluctuating plume model for odour dispersion around buildings
60
Development of a fluid bed granulation process control strategy based on real-time process and product measurements
61
Development of a fluorescence analysis method for N-acetylneuraminic acid and its oxidized product ADOA
62
Development of a fluorescence lifetime-based sol–gel humidity sensor Original Research Article
63
Development of a fluorescence polarization based assay for histone deacetylase ligand discovery
64
Development of a fluorescence quenching assay to measure the fraction of organic carbon present in self-assembled gels in seawater
65
Development of a fluorescence-based method for evaluation of self-cleaning properties of photocatalytic layers
66
Development of a fluorescence-based microplate method for the determination of volatile fatty acids in anaerobically digested and sewage sludges
67
Development of a fluorescence-based microtiter plate method for the measurement of glutathione in yeast
68
Development of a fluorescent antibody method for the detection of Enterococcus faecium and its potential for coastal aquatic environment monitoring
69
Development of a fluorescent anti-factor Xa assay to monitor unfractionated and low molecular weight heparins
70
Development of a fluorescent chelating ligand for gallium ion having a quinazoline structure with two Schiff base moieties Original Research Article
71
Development of a fluorescent imaging sensor for the detection of human body sweat odor
72
Development of a fluorescent intercalator displacement assay (G4-FID) for establishing quadruplex-DNA affinity and selectivity of putative ligands
73
Development of a fluorescent light technique for evaluating microdamage in bone subjected to fatigue loading
74
Development of a fluorescent optode membrane for sodium ion based on the calix[4]arene and tetraphenylporphine
75
Development of a fluorescent probe for nitric oxide detection based on difluoroboradiaza-s-indacene fluorophore Original Research Article
76
Development of a fluorescent probe for the study of the sponge-derived simplexide immunological properties Original Research Article
77
Development of a fluoroimmunosensor for theophylline using immobilised antibody
78
Development of a fluorosiloxane polymer-coated optical fibre sensor for detection of organic volatile compounds
79
Development of a Fluvial Egg Drift Simulator to evaluate the transport and dispersion of Asian carp eggs in rivers
80
Development of a Fluvial Egg Drift Simulator to evaluate the transport and dispersion of Asian carp eggs in rivers
81
Development of a flux-less soldering method by ultrasonic modulated laser
82
Development of a focused ion beam (FIB) technique to minimize X-ray fluorescence during energy dispersive X-ray spectroscopy (EDS) of FIB specimens in the transmission electron microscope (TEM)
83
Development of a focused ion beam (FIB) technique to minimize X-ray fluorescence during energy dispersive X-ray spectroscopy (EDS) of FIB specimens in the transmission electron microscope (TEM)
84
Development of a focused ultrasonic-assisted extraction of polycyclic aromatic hydrocarbons in marine sediment and mussel samples Original Research Article
85
DEVELOPMENT OF A FODDER BALES CHOPPER
86
DEVELOPMENT OF A FODDER BEET CHOPPING MACHINE
87
Development of a folate-modified curcumin loaded micelle delivery system for cancer targeting
88
Development of a folded waveguide antenna for ICRF heating in the large helical device
89
Development of a food composition database for the estimation of dietary intakes of glucosinolates, the biologically active constituents of cruciferous vegetables
90
Development of a food composition database: methods and goals for the future
91
Development of a food spoilage indicator for monitoring freshness of skinless chicken breast
92
Development of a food-grade organogel with high bioaccessibility and loading of curcuminoids
93
Development of a foot scanner for assessing the mechanical properties of plantar soft tissues under different bodyweight loading in standing
94
Development of a foraminifera-based transfer function in the Basque marshes, N. Spain: Implications for sea-level studies in the Bay of Biscay
95
Development of a force field for some copper(II) Schiff-base complexes
96
Development of A Forecasting Model for Investment in Tehran Stock Exchange Based on Seasonal Coefficient
97
Development of a Forensically Important Fly, Megaselia scalaris (Loew) (Diptera: Phoridae) on Cow’s Liver and Various Agar-based Diets
98
Development of a formulation of Pseudomonas fluorescens PfALR2 for management of rice sheath blight
99
Development of a forward chain approach for calculating self-delay of project activities
100
Development of a four electrode sensor array for impedance spectroscopy in high content screenings of fermentation processes
101
Development of a four-grade and four-segment electrodialysis setup for desalination of polymer-flooding produced water Original Research Article
102
Development of a fourth generation energy recovery device. A ‘CTOʹs notebook’ Original Research Article
103
Development of a four-zone carousel process packed with metal ion-imprinted polymer for continuous separation of copper ions from manganese ions, cobalt ions, and the constituent metal ions of the buffer solution used as eluent
104
Development of a FPW allergy biosensor for human IgE detection by MEMS and cystamine-based SAM technologies
105
Development of a fractionation method for the detection and identification of oak ellagitannins in red wines Original Research Article
106
Development of a fragility model for low-rise steel and reinforced concrete buildings in Iran
107
Development of a framework and tool to asses on-farm energy uses of cotton production
108
Development of a framework based on an ecosystem services approach for deriving specific protection goals for environmental risk assessment of pesticides Original Research Article
109
Development of a framework for a high-resolution, three-dimensional regional air quality simulation and its application to predicting future air quality over Japan
110
Development of a Framework for Assessing Professionalism in Medical Students
111
Development of a framework for customer co-creation in NPD through multi-issue negotiation with issue trade-offs
112
Development of a framework for landscape assessment of Taiwanese wetlands
113
Development of a framework for optimization of reservoir simulation studies
114
DEVELOPMENT OF A FRAMEWORK FOR QUANTIFYING THE REMOVAL OF HUMIC SUBSTANCES BY BIOLOGICAL FILTRATION
115
DEVELOPMENT OF A FRAMEWORK FOR QUANTIFYING THE REMOVAL OF HUMIC SUBSTANCES BY BIOLOGICAL FILTRATION
116
Development of a framework for the growth of technological entrepreneurship in FMCG companies
117
Development of a framework for the risk assessment of Na-Tech accidental events
118
Development of a framework for the risk assessment of Na-Tech accidental events
119
Development of a framework to assess and guide IT investments: An analysis based on a discretionary–mandatory classification
120
Development of a framework to evaluate service-oriented architecture governance using COBIT approach
121
Development of a free anthropomorphic voxel model of human body for wide-band computational electromagnetics dosimetry
122
Development of a freeze-dried radiopharmaceutical kit for dopamine transporters imaging
123
Development of a frequency-detuned interferometer as a prototype experiment for next-generation gravitational-wave detectors
124
Development of a Fresnel lens for cold neutrons based on neutron refractive optics
125
Development of a Fresnel lens for cold neutrons based on neutron refractive optics
126
Development of a Fresnel lens for cold neutrons based on neutron refractive optics
127
Development of a fretting wear test rig and preliminary studies for understanding the fretting wear properties of steels
128
Development of a fretting–fatigue mapping concept: The effect of material properties and surface treatments
129
Development of a friction energy capacity approach to predict the surface coating endurance under complex oscillating sliding conditions
130
Development of a fritless packed column for capillary electrochromatography–mass spectrometry
131
Development of a front end ASIC for Dark Matter directional detection with MIMAC
132
Development of a front end ASIC for Dark Matter directional detection with MIMAC
133
Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs
134
Development of a front-end analog circuit for multi-channel SiPM readout and performance verification for various PET detector designs
135
Development of a FTIR-ATR based model for typing clinically relevant Acinetobacter baumannii clones belonging to ST98, ST103, ST208 and ST218
136
Development of a full scale ECRH mm-wave launching system mock-up for ITER
137
Development of a full scale remote steerable ECRH mm-wave launching system test set-up for ITER
138
Development of a fully automated on-line solid phase extraction and high-performance liquid chromatography with diode array detection method for the pharmacokinetic evaluation of bavachinin: A study on absolute bioavailability and dose proportionality
139
Development of a fully automated sequential injection solid-phase extraction procedure coupled to liquid chromatography to determine free 2-hydroxy-4-methoxybenzophenone and 2-hydroxy-4-methoxybenzophenone-5-sulphonic acid in human urine Original Research
140
Development of a Fully Integrated Analysis System for Ions Based on Ion-Selective Optodes and Centrifugal Microfluidics
141
Development of a fully Lagrangian MPS-based coupled method for simulation of fluid–structure interaction problems
142
Development of a fully-distributed daily hydrologic feedback model addressing vegetation, land cover, and soil water dynamics (VELAS)
143
Development of a functional status assessment of seniors visiting emergency department
144
Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking of stainless steels in high temperature oxygenated water
145
Development of a fundamental equation of state for the liquid region of a pure fluid from speed of sound measurements. Application to water
146
Development of a fuzzy air quality performance indicator
147
Development of a fuzzy ANP based SWOT analysis for the airline industry in Turkey
148
Development of a Fuzzy Controller with UPFC’s For Damping of Oscillation in Multi-machine Integrated Power System
149
Development of a fuzzy decision support system for commodity acquisition using fuzzy analytic network process
150
Development of a fuzzy decision support system to determine the severity of obstructive pulmonary in chemical injured victims
151
Development of a fuzzy goal programming model for optimization of lead time and cost in an overlapped product development project using a Gaussian Adaptive Particle Swarm Optimization-based approach
152
Development of a fuzzy goal programming model for optimization of lead time and cost in an overlapped product development project using a Gaussian Adaptive Particle Swarm Optimization-based approach
153
Development of a fuzzy inference system based on genetic algorithm for high-impedance fault detection
154
Development of a fuzzy logic traffic system for isolated signalized intersections in the State of Kuwait
155
Development of a Fuzzy Model for Iranian Marine Casualties Management
156
Development of a fuzzy sales forecasting system for vending machines
157
Development of a fuzzy saturation index for sulfate scale prediction
158
Development of a fuzzy-expert system for incident detection and classification
159
Development of a fuzzy-nets-based in-process surface roughness adaptive control system in turning operations
160
Development of a fuzzy-nets-based surface roughness prediction system in turning operations
161
Development of a GA-based method for reliability-based optimization of structures with discrete and continuous design variables using OpenSees and Tcl
162
Development of a gadolinium-loaded liquid scintillator for solar neutrino detection and neutron measurements
163
Development of a gadolinium-loaded liquid scintillator for solar neutrino detection and neutron measurements
164
Development of a galling resistance test method with a uniform stress distribution
165
Development of a Gallium-Doped Germanium Far-Infrared Photoconductor Direct Hybrid Two-Dimensional Array
166
Development of a galvanic monitoring probe to improve service life prediction of reinforced concrete structures with respect to reinforcement corrosion
167
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structure: Part 2. Laboratory electrochemical testing of sensors in concrete
168
Development of a galvanic sensor system for detecting the corrosion damage of the steel embedded in concrete structures: Part 1. Laboratory tests to correlate galvanic current with actual damage
169
Development of a galvanostatic analysis technique as an in-situ diagnostic tool for PEMFC single cells and stacks
170
Development of a gamma compensated boron lined ionisation chamber for reactor safety and control applications
171
Development of a gamma compensated boron lined ionisation chamber for reactor safety and control applications
172
Development of a gamma-camera with a functional collimator
173
Development of a gamma-camera with a functional collimator
174
Development of a Gamma-Ray Box (GARBO)
175
Development of a Gamma-Ray Box (GARBO)
176
Development of a gas chromatographic method for the determination of Chlorpyrifos and its metabolite Chlorpyrifos-oxon in wine matrix
177
Development of a gas chromatographic test for the quantification of the biomarker 3-bromopropionic acid in human urine
178
Development of a gas chromatography compatible Sample Processing System (SPS) for the in-situ analysis of refractory organic matter in martian soil: preliminary results Original Research Article
179
Development of a gas chromatography/mass spectrometry method to quantify several urinary monohydroxy metabolites of polycyclic aromatic hydrocarbons in occupationally exposed subjects
180
Development of a gas chromatography–mass spectrometry method for the determination of household insecticides in indoor air
181
Development of a gas chromatography–mass spectrometry method for the determination of pesticides in gaseous and particulate phases in the atmosphere Original Research Article
182
Development of a gas diffusion probe for the rapid measurement of pCO2 in aquatic samples Original Research Article
183
Development of a gas filter against wire chamber ageing for the MDT chambers in ATLAS
184
Development of a gas filter against wire chamber ageing for the MDT chambers in ATLAS
185
Development of a gas layer to mitigate cavitation damage in liquid mercury spallation targets
186
Development of a gas phase combustion model suitable for low and high turbulence conditions
187
Development of a Gas Sampling Technique for Determining Trace Elements in Submarine Volcanic Exhalations
188
Development of a gas sensor by thick film technology for automotive applications: choice of materials—realization of a prototype
189
Development of a gas turbine fuel nozzle for DME and a design method thereof
190
Development of a gaseous PMT with micro-pattern gas detectors
191
Development of a gaseous PMT with micro-pattern gas detectors
192
Development of a gastight sealing material for ceramic components
193
Development of a Gastroretentive Drug Delivery System based on Superporous Hydrogel
194
Development of a GC-MS Method for Determination of various Polycyclic Aromatic Hydrocarbons in Iranian Traditional and Semi-industrial Taftoon Bread
195
Development of a GC–MS/MS strategy to determine 15 mycotoxins and metabolites in human urine
196
Development of a Gd loaded liquid scintillator for electron anti-neutrino spectroscopy
197
Development of a Gd loaded liquid scintillator for electron anti-neutrino spectroscopy
198
Development of a Geant4 solid for stereo mini-jet cells in a cylindrical drift chamber Original Research Article
199
Development of a gel monolithic column polydimethylsiloxane microfluidic device for rapid electrophoresis separation
200
Development of a gel-to-gel electro-kinetic pinched injection method for an integrated micro-fluidic based DNA analyser Original Research Article
201
Development of a GEM-based High Resolution TPC for the ILC
202
Development of a GEM-based High Resolution TPC for the ILC
203
Development of a general approach to the synthesis of a library of isoflavonoid derivatives
204
Development of a general ecosystem model for a range of scales and ecosystems
205
Development of a general ecosystem model for a range of scales and ecosystems
206
Development of a general intertrip monitoring system for the NGC network
207
Development of a General Potexvirus Detection Method
208
Development of a general river regime index (RRI) for intra-annual flow variation based on the unit river concept and flow variation end-points
209
Development of a general, enantioselective organocatalytic Mukaiyama–Michael reaction with α,β-unsaturated aldehydes
210
Development of a generalized coalescence and breakup closure for the inhomogeneous MUSIG model
211
Development of a generalized material interface for the simulation of finite elasto-plastic deformations
212
Development of a generalized neural network
213
Development of a generalized parameter window for cold spray deposition
214
Development of a generalized parameter window for cold spray deposition Original Research Article
215
Development of a generic assay for the determination of total trihydroxybenzoate derivatives based on gold-luminol chemiluminescence Original Research Article
216
Development of a generic computer-aided process planning support system
217
Development of a generic crop model template in the cropping system model APSIM
218
Development of a generic flow injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach I. Selection and evaluation of the FIA system parameters
219
Development of a generic flow injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: I. Selection and evaluation of the FIA system parameters Original Research Article
220
Development of a generic flow-injection analysis method for compounds with a secondary amine or amide function, using an experimental design approach: Part II. Selection and evaluation of the chemical reaction parameters Original Research Article
221
Development of a generic microelectrode array biosensing system Original Research Article
222
Development of a generic multipurpose tokamak plasma discharge flight simulator
223
Development of a generic repair joint for certification of bonded composite repairs
224
Development of a generic repair joint for certification of bonded composite repairs
225
Development of a Generic Risk Matrix to Manage Project Risks
226
Development of a Genetic Algorithm for Advertising Time Allocation Problems
227
Development of a genetic algorithm for component placement sequence optimization in printed circuit board assembly
228
Development of a genetic algorithm-based lookup table approach for efficient numerical integration in the method of finite spheres with application to the solution of thin beam and plate problems
229
Development of a genetic selection for catalytic antibodies
230
Development of a genetically tuned fuzzy dynamic model for nonlinear dynamical systems: Application to reaction section of Tennessee Eastman process
231
Development of a Geographic Database Infrastructure at the Atatürk Arboretum Using Free Open Source Software(s)
232
Development of a geography-referenced regional exposure assessment tool for European rivers - great-er contribution to great-er #1
233
DEVELOPMENT OF A GEOMATERIAL FROM DREDGED BAY MUD
234
Development of a geometric flight unloading model for flighted rotary dryers
235
Development of a geometric model for an all-reflective camera system
236
Development of a geomorphological instantaneous unit hydrograph model for scantily gauged watersheds
237
Development of a geospatial model to quantify, describe and map urban growth
238
Development of a GEP model to assess CERCHAR abrasivity index of rocks based on geomechanical properties
239
Development of a Ginkgo biloba fingerprint chromatogram with UV and evaporative light scattering detection and optimization of the evaporative light scattering detector operating conditions
240
Development of a GIS of the Moray Firth (Scotland, UK) and its application in environmental management (site selection for an `artificial reefʹ)
241
Development of a GIS-based decision support system for urban air quality management in the city of Istanbul
242
Development of a glass GEM
243
Development of a glass GEM
244
Development of a glass optical fiber containing ZnO–Al2O3–SiO2 glass-ceramics doped with Co2+ and its optical absorption characteristics
245
Development of a Global Backscatter Model in support to the Sentinel-1 mission design
246
Development of a global computable general equilibrium model coupled with detailed energy end-use technology
247
Development of a global evapotranspiration algorithm based on MODIS and global meteorology data
248
Development of a global MHD simulation model for the S-M-I coupling process in the substorm prediction program at CRL Original Research Article
249
Development of a global stochastic model relating the distribution of individual cell and population physiological states
250
Development of a global voltage security indicator (VSI) and role of SVC on it in longitudinal power supply (LPS) system
251
Development of a globally applicable model for near real-time prediction of seismically induced landslides
252
Development of a GNSS water vapour tomography system using algebraic reconstruction techniques Original Research Article
253
Development of a goal programming model for optimization of truck allocation in open pit mines
254
Development of a gold nanoparticles based chemiluminescence imaging assay and its application
255
Development of a gold nanoparticles based chemiluminescence imaging assay and its application Original Research Article
256
Development of a GPC-based sliding mode controller
257
Development of a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI)
258
Development of a gradient elution preparative high performance liquid chromatography method for the recovery of the antibiotic ertapenem from crystallization process streams
259
Development of a gradient reversed-phase HPLC method for the determination of sodium ferulate in beagle dog plasma
260
Development of a granular normal contact force model based on a non-Newtonian liquid filled dashpot
261
Development of a graphical interface for the Rietveld refinement program DBWS
262
Development of a graphical user interface for a real-time power system simulator
263
Development of a graphical user interface for the conformal finite-difference/time-domain (CFDTD) software package
264
Development of a green chromatographic method for determination of colorants in food samples
265
Development of a green chromatographic method for determination of fat-soluble vitamins in food and pharmaceutical supplement
266
Development of a Green Combat Armour from Rame-Kevlar-Polyester Composite
267
Development of a green extraction procedure with super/subcritical fluids to produce extracts enriched in oleuropein from olive leaves
268
Development of a green fluorescent tagged strain of Aspergillus carbonarius to monitor fungal colonization in grapes
269
Development of a green separation technique for recovery of Wilkinsonʹs catalysts from bulk hydrogenated nitrile butadiene rubber
270
Development of a greenhouse gas accounting GIS-based tool to support local policy making—application to an Italian municipality
271
Development of a Greenhouse Side-ventilation Controller driven by Photovoltaic Energy
272
Development of a ground displacement measurement method for failed slopes at the toes of landslides
273
Development of a ground-based radar for scattering measurements
274
Development of a ground-based space micro-algae photo-bioreactor Original Research Article
275
Development of a ground-water modeling system for military installation restoration
276
Development of a group contribution method for determination of thermal conductivity of ionic liquids
277
Development of a group contribution method for estimating the thermal decomposition temperature of ionic liquids
278
Development of a group contribution method for polymers within the PC-SAFT model
279
Development of a group selective molecularly imprinted polymers based solid phase extraction of malachite green from fish water and fish feed samples Original Research Article
280
Development of a group treatment for enhancing motivation to change PTSD symptoms Original Research Article
281
Development of a group-specific immunoassay for sulfonamides: Application to bee honey analysis
282
Development of a growth inhibition test with the marine and brackish water red alga Ceramium tenuicorne
283
Development of a growth medium suitable for exopolysaccharide production by Lactobacillus delbrueckii ssp. bulgaricus RR
284
Development of a GSO detector assembly for a continuous blood sampling system
285
Development of a GTM-based patent map for identifying patent vacuums
286
Development of a Guidance System for an Agricultural Wheeled Robotic Platform in Row Crop Fields
287
Development of a guinea pig model of chorioamnionitis and fetal brain injury
288
Development of a GVM-based ion beam energy stabilization system at the Bucharest Van de Graaff FN tandem accelerator
289
Development of a GVM-based ion beam energy stabilization system at the Bucharest Van de Graaff FN tandem accelerator
290
Development of a hand–arm mechanical analogue for evaluating chipping hammer vibration emission values
291
Development of a handheld 16 channel pen-type LAPS for electrochemical sensing
292
Development of a hand-held sensor probe for detection of sound components radiated from a specific device using surface intensity measurements
293
Development of a hard nano-structured multi-component ceramic coating by laser cladding
294
Development of a hashing-based data structure for the fast retrieval of 3D terrestrial laser scanned data
295
Development of a Hazard and Operability-based method for identifying safety management vulnerabilities in high risk systems
296
Development of a hazard assessment model for near surface caves in limestone
297
Development of a head scanner for proton CT
298
Development of a head scanner for proton CT
299
Development of a headspace gas chromatographic test for the quantification of 1- and 2-bromopropane in human urine
300
Development of a headspace gas chromatography method to determine residual aliphatic amines in oligonucleotides
301
Development of a headspace solid phase microextraction-gas chromatography method for monitoring volatile compounds in extended time–course experiments of olive oil Original Research Article
302
Development of a headspace solid-phase microextraction gas chromatography–mass spectrometric method for the determination of short-chain fatty acids from intestinal fermentation
303
Development of a headspace solid-phase microextraction method combined with gas chromatography mass spectrometry for the determination of phthalate esters in cow milk Original Research Article
304
Development of a headspace solid-phase microextraction procedure for the determination of free volatile fatty acids in waste waters
305
Development of a headspace solid-phase microextraction–gas chromatography–mass spectrometry method for the identification of odour-causing volatile compounds in packaging materials
306
Development of a headspace trap HRGC/MS method for the assessment of the relevance of certain aroma compounds on the sensorial characteristics of commercial apple juice
307
Development of a headspace-solid phase micro extraction method to monitor changes in volatile profile of rose (Rosa hybrida, cv David Austin) petals during processing
308
Development of a health care provider survey for domestic violence: Psychometric properties Original Research Article
309
Development of a health care systems curriculum
310
Development of a Health Literacy Program for Parents of Children with Cancer: A Mixed-Methods Study Protocol
311
Development of a Health Literacy Promotion Program (HeLPP) to Promote Self-Care Behaviors and Quality of Life among Rural Patients with Type 2 Diabetes: Preliminary Results
312
DEVELOPMENT OF A HEALTH PROMOTION QUESTIONNAIRE INDEX (HPQI) TO MEASURE DOKTOR MUDA (JUNIOR DOCTOR) PROGRAMME IMPACT ON SCHOOLCHILDREN’S ORAL HEALTH KNOWLEDGE, ATTITUDES AND BEHAVIOUR
313
Development of a health sciences library at a historically black college and university (HBCU): laying the foundation for increased minority health and health disparities
314
Development of a Healthcare Coalition for Emergency Preparedness
315
Development of a health-related lifestyle self-management intervention for patients with coronary heart disease
316
Development of a Heart Failure Palliative Care Educational Program for Nurses: A Multi Method Approach
317
Development of a heat exchanger for the cold side of a thermoelectric module
318
Development of a heat transfer correlation for a Scraped-Surface Heat Exchanger
319
Development of a heat transfer dimensionless correlation for spheres immersed in a wide range of Prandtl number fluids
320
Development of a Heat Transfer Model for Plant Tissue Culture Vessels
321
Development of a heat-sensor for the measurement of reaction enthalpy based on laser deflection
322
Development of a heavy demining machine
323
Development of a heavy metal sorption system through the PS functionalization of coconut (Cocos nucifera) fibers
324
Development of a heavy metals enzymatic-based assay using papain Original Research Article
325
Development of a helicopter-mounted eye-safe laser radar system for distance measurement between power transmission lines and nearby trees
326
Development of a helium atmosphere soil incubation technique for direct measurement of nitrous oxide and dinitrogen fluxes during denitrification
327
Development of a helium atmosphere soil incubation technique for direct measurement of nitrous oxide and dinitrogen fluxes during denitrification
328
Development of a helium-cooled divertor concept: design-related requirements on materials and fabrication technology
329
Development of a helium-cooled divertor: Material choice and technological studies
330
Development of a Hemilabile P-P=O Ligand Based on the Concept of ­Conformational Control
331
Development of a herbicide application map using artificial neural networks and fuzzy logic
332
Development of a herbicide biosensor using a peptide receptor screened from a combinatorial library
333
Development of a heterobimetallic Ru(II)–Cu(II) complex for highly selective and sensitive luminescence sensing of sulfide anions Original Research Article
334
Development of a heterogeneous catalytic cracking reactor utilizing online mass spectrometry analysis
335
Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds Original Research Article
336
Development of a hexavalent chromium ISFET sensor with a polymeric membrane including tributylphosphate
337
Development of a hierarchical Bayesian model to estimate the growth parameters of Listeria monocytogenes in minimally processed fresh leafy salads
338
Development of a hierarchical system for the teletransmission of environmental and energy data
339
Development of a Higee bioreactor (HBR) for production of polyhydroxyalkanoate: Hydrodynamics, gas–liquid mass transfer and fermentation studies
340
Development of a high current electron gun to generate single-bunch beams with the L-band linear accelerator in Osaka University
341
Development of a high current electron gun to generate single-bunch beams with the L-band linear accelerator in Osaka University
342
Development of a high current supersonic ion source for electromagnetic accelerators
343
Development of a high cycle fatigue testing system and its application to thin aluminum film
344
Development of a high density carbonaceous adsorbent from compressed wood Original Research Article
345
Development of a high efficiency and high resolution Compton probe for prostate imaging
346
Development of a high efficiency and high resolution Compton probe for prostate imaging
347
Development of a high efficiency annular detector system for RIB experiments at NSC
348
Development of a high efficiency annular detector system for RIB experiments at NSC
349
Development of a high efficiency radiation converter using a spiral heat exchanger
350
Development of a high efficient gas to hydrate (GTH) conversion process using SDS kinetic promoter for maximizing the CO2 recovery with minimum energy consumption
351
Development of a high energy pulsed plasma simulator for the study of liquid lithium trenches
352
Development of a high gradient permanent magnetic separator (HGPMS)
353
Development of a high lateral resolution TOF-SIMS apparatus for single particle analysis
354
Development of a high modulus paste fill using fine gold mill tailings
355
Development of a high performance anion exchange chromatography analysis for mapping of oligosaccharides
356
Development of a high performance Cu-based ternary oxide catalyst for oxidative steam reforming of methanol using an artificial neural network Original Research Article
357
Development of a high performance electrochemical cofactor regeneration module and its application to the continuous reduction of FAD
358
Development of a High Performance End Mill Based on the Analysis of Chip Flow Generated by Curved Rake Face
359
Development of a high performance liquid chromatography method and a liquid chromatography–tandem mass spectrometry method with pressurized liquid extraction for simultaneous quantification and confirmation of cyromazine, melamine and its metabolites in f
360
Development of a high performance liquid chromatography method and a liquid chromatography–tandem mass spectrometry method with the pressurized liquid extraction for the quantification and confirmation of sulfonamides in the foods of animal origin
361
Development of a high performance liquid chromatography method for quantification of isomers β-caryophyllene and α-humulene in copaiba oleoresin using the Box-Behnken design
362
Development of a high performance liquid chromatography/mass spectroscopy method for the determination of strychnine concentrations in insects used to assess potential risks to insectivores
363
Development of a high performance size exclusion chromatography method to determine the stability of Human Serum Albumin in a lyophilized formulation of Interferon alfa-2b
364
Development of a high power diplexer with short-slotted metal half mirrors for electron cyclotron current drive
365
Development of a high precision flexure-based microgripper
366
Development of a high repetition rate Nd:YAG slab laser and soft X-ray generation by cryogenic target
367
Development of a high resolution runoff routing model, calibration and application to assess runoff from the LMD TGCM
368
Development of a high resolution UV spectrophotometer for at-line monitoring of bioprocesses
369
Development of a high sensitive automatic setup for screening of microcystins in surface waters by employing a LED-based photometric detector
370
Development of a high spatial resolution SQUID magnetometer for biomagnetic measurement
371
Development of a high strength Al–Mg2Si–Mg–Zn based alloy for high pressure die casting
372
Development of a high strength high toughness ausferritic steel
373
Development of a high temperature Cf/XSi2–SiC (X = Mo, Ti) composite via reactive melt infiltration
374
Development of a high throughput 96-well plate sample preparation method for the determination of trileptal (oxcarbazepine) and its metabolites in human plasma
375
Development of a high throughput cross-flow filtration system for detailed investigation of fouling processes
376
Development of a high throughput screening tool for biotransformations utilising a thermophilic l-aminoacylase enzyme
377
Development of a high throughput, quantitative assay of the effects of fungal-derived griseofulvin and cordycepin, and butyrate on the cytoskeleton
378
Development of a high torque–high power spindle system equipped with a synchronous motor for high performance cutting
379
Development of a high yield and low cycle time biomass char production system
380
Development of a high-density position decoder circuit for GAPD-based PET with a large number of readout channels
381
Development of a high-density position decoder circuit for GAPD-based PET with a large number of readout channels
382
Development of a high-efficiency high-resolution imaging detector for 30–80 keV X-rays
383
Development of a high-efficiency high-resolution imaging detector for 30–80 keV X-rays
384
Development of a high-efficiency hydrogen generator for fuel cells for distributed power generation
385
Development of a high-efficiency modeling technique for weld-bonded steel joints in vehicle structures, Part II: Dynamic experiments and simulations
386
Development of a high-efficiency pulsed slow positron beam for measurements with orthopositronium in vacuum
387
Development of a high-efficiency pulsed slow positron beam for measurements with orthopositronium in vacuum
388
Development of a higher order finite element on a Winkler foundation
389
Development of a higher-order accurate kinetic wave/particle flux-splitting algorithm for the Euler equations Original Research Article
390
Development of a highly compact steam generator
391
Development of a highly efficient low-emission diesel engine-powered co-generation system and its optimization using Taguchi method
392
Development of a highly efficient system for assessing recombinant gene expression in plant cell suspensions via Agrobacterium tumefaciens transformation
393
Development of a Highly Flexible Incremental Roll Forming Process for the Manufacture of a Doubly Curved Sheet Metal
394
Development of a highly hydrophilic nanofiltration membrane for desalination and water treatment Original Research Article
395
Development of a highly intense state-selected CH radical beam source for the study on the collision energy dependent reaction dynamics
396
Development of a highly reliable helium refrigeration system––R&D of a highly reliable helium refrigeration system (conventional type) Original Research Article
397
Development of a highly reliable helium refrigeration system––R&D of a highly reliable helium refrigeration system (oil-free type) Original Research Article
398
Development of a highly robust solid phase microextraction fiber based on crosslinked methyl methacrylate–polyhedral oligomeric silsesquioxane hybrid polymeric coating Original Research Article
399
Development of a highly selective EP2-receptor agonist. Part 1: identification of 16-hydroxy-17,17-trimethylene PGE2 derivatives Original Research Article
400
Development of a highly selective EP2-receptor agonist. Part 2: identification of 16-Hydroxy-17,17-trimethylene 9β-chloro PGF derivatives Original Research Article
401
Development of a highly selective voltammetric sensor for nanomolar detection of mercury ions using glassy carbon electrode modified with a novel ion imprinted polymeric nanobeads and multi-wall carbon nanotubes
402
Development of a highly sensitive analytical technique for surfactants by time-of-flight secondary ion mass spectrometry
403
Development of a highly sensitive and robust Cor a 9 specific enzyme-linked immunosorbent assay for the detection of hazelnut traces Original Research Article
404
Development of a highly sensitive and selective hyphenated technique (molecularly imprinted micro-solid phase extraction fiber–molecularly imprinted polymer fiber sensor) for ultratrace analysis of folic acid Original Research Article
405
Development of a highly sensitive and selective mercury optical sensor based on immobilization of bis(thiophenal)-4,4′-methylenedianiline on a PVC membrane
406
Development of a highly sensitive and selective optical chemical sensor for batch and flow-through determination of mercury ion
407
Development of a highly sensitive and selective optical sensor for determination of ultra-trace amount of silver ions
408
Development of a highly sensitive and specific enzyme-linked immunosorbent assay (ELISA) for the detection of phenylethanolamine A in tissue and feed samples and confirmed by liquid chromatography tandem mass spectrometry (LC–MS/MS)
409
Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay (ELISA) for detection of Sudan I in food samples
410
Development of a highly sensitive and specific monoclonal antibody-based enzyme-linked immunosorbent assay for determination of doxycycline in chicken muscle, liver and egg
411
Development of a highly sensitive enzyme immunoassay for human calcitonin using solid phase coupled with multiple antibodies
412
Development of a highly sensitive enzyme-linked immunosorbent assay for atrazine Performance evaluation by flow injection immunoassay
413
Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone
414
Development of a highly sensitive inhibition immunoassay for microcystin-LR
415
Development of a highly sensitive inhibition immunoassay for microcystin-LR Original Research Article
416
Development of a highly sensitive method for the quantification of estrone and estradiol in serum by liquid chromatography tandem mass spectrometry without derivatization
417
Development of a highly sensitive MIP based-QCM nanosensor for selective determination of cholic acid level in body fluids
418
Development of a highly sensitive porous Si-based hydrogen sensor using Pd nano-structures
419
Development of a highly sensitive, field operable biosensor for serological studies of Ebola virus in central Africa
420
Development of a highly sensitive, second antibody format chemiluminescence enzyme immunoassay for the determination of 17β-estradiol in wastewater Original Research Article
421
Development of a highly water-soluble peptide-based human neutrophil elastase inhibitor; AE-3763 for treatment of acute organ injury Original Research Article
422
Development of a highly α-regioselective indium-mediated allylation reaction in water
423
Development of a highly α-selective galactopyranosyl donor based on a rational design
424
Development of a high-performance angle-resolving electron energy analyzer
425
Development of a high-performance gantry system for a new generation of optical slope measuring profilers
426
Development of a high-performance gantry system for a new generation of optical slope measuring profilers
427
Development of a high-performance immunolatex based on “soft landing” antibody immobilization mechanism
428
Development of a high-performance laser-guided deep-hole boring tool:: Optimal determination of reference origin for precise guiding
429
Development of a high-performance lead–acid battery for new-generation vehicles
430
Development of a high-performance liquid chromatographic method for bioanalytical applications with sulpiride
431
Development of a high-performance liquid chromatographic method for bioequivalence study of flavoxate tablets
432
Development of a high-performance liquid chromatographic method for the determination of 11-keto-β-boswellic acid in human plasma
433
Development of a high-performance liquid chromatographic method for the determination of a new potent radioiodinated melanoma imaging and therapeutic agent
434
Development of a high-performance liquid chromatographic method for the quantification of chlorpyrifos, pyridostigmine bromide, N,N-diethyl-m-toluamide and their metabolites in rat plasma and urine
435
Development of a high-performance liquid chromatographic method to determine the concentration of karenitecin, a novel highly lipophilic camptothecin derivative, in human plasma and urine
436
Development of a high-performance liquid chromatographic method with electrochemical detection for the determination of hyperforin
437
Development of a high-performance liquid chromatographic–mass spectrometric assay for the specific and sensitive quantification of Ro 64-0802, an anti-influenza drug, and its pro-drug, oseltamivir, in human and animal plasma and urine
438
Development of a high-performance liquid chromatographic–mass spectrometric method for the determination of cellular levels of the tyrosine kinase inhibitors lapatinib and dasatinib
439
Development of a high-performance liquid chromatographic–tandem mass spectrometric method for the determination of pharmacokinetics of Co 102862 in mouse, rat, monkey and dog plasma
440
Development of a high-performance liquid chromatography carbon column based method for the fractionation of dioxin-like polychlorinated biphenyls
441
Development of a high-performance liquid chromatography method for the determination of caspofungin with amperometric detection and its application to in vitro microdialysis experiments
442
Development of a high-performance liquid chromatography method for the simultaneous quantification of four organoarsenic compounds in the feeds of swine and chicken
443
Development of a high-performance liquid chromatography method for the simultaneous quantification of quinoxaline-2-carboxylic acid and methyl-3-quinoxaline-2-carboxylic acid in animal tissues
444
Development of a high-performance liquid chromatography method for warfarin detection in human plasma
445
Development of a high-performance liquid chromatography method to monitor the residues of benzimidazoles in bovine milk
446
Development of a high-performance liquid chromatography–electrospray ionization-quadrupole-time-of-flight-mass spectrometry methodology for the determination of three highly antihypertensive peptides in maize crops
447
Development of a high-performance liquid chromatography-fluorescence detection method for analyzing nonylphenol/dinonylphenol-polyethoxylate-based phosphate esters
448
Development of a high-performance liquid chromatography–tandem mass spectrometry method for the determination of flurogestone acetate in ovine plasma
449
Development of a High-Performance Magnetic Gear
450
Development of a high-performance microstrip gas chamber with a capability of track discrimination for neutron detection
451
Development of a high-performance microstrip gas chamber with a capability of track discrimination for neutron detection
452
Development of a high-performance PEFC module operated by reformed gas
453
Development of a High-Porosity Fixed-Abrasive Pad Utilizing Catalytic Effects of TiO2 on Polyurethane Matrix
454
Development of a high-power lithium-ion battery
455
Development of a high-power solid-state switch using static induction thyristors for a klystron modulator
456
Development of a high-power solid-state switch using static induction thyristors for a klystron modulator
457
Development of a high-power THz radiation source for plasma diagnostics
458
Development of a high-precision image-processing automatic measurement system for MRI visceral fat images acquired using a binomial RF-excitation pulse
459
Development of a high-precision, wear-resistant micro-holes structure
460
Development of a high-range gamma ion chamber for space critical applications
461
Development of a high-range gamma ion chamber for space critical applications
462
Development of a high-rate high-resolution detector for EXAFS experiments
463
Development of a high-resolution (1 km × 1 km, 1 h) emission model for Spain: The High-Elective Resolution Modelling Emission System (HERMES)
464
Development of a high-resolution alpha camera
465
Development of a high-resolution alpha camera
466
Development of a high-resolution emission inventory for Spain using the SMOKE modelling system: A case study for the years 2000 and 2010
467
Development of a high-resolution hyperbolic model on quadratic elements Original Research Article
468
Development of a high-resolution measurement technique of the interval between bunches in a linac with coherent transition radiation
469
Development of a high-resolution measurement technique of the interval between bunches in a linac with coherent transition radiation
470
Development of a high-resolution melt-based assay to rapidly detect the azole-resistant Candida auris isolates
471
Development of a High-resolution Melting Analysis Method Based on SYBR Green-I for rs7216389 Locus Genotyping in Asthmatic Child Patients
472
Development of a High-Resolution Melting Method for Screening R188H Polymorphism in XRCC2 Gene
473
Development of a High-Resolution Nested Air Pollution Model: The Numerical Approach
474
Development of a high-sensitivity chromatographic separation system for pyridylaminated aldopentoses and aldohexoses
475
Development of a high-sensitivity nested PCR assay for the detection of Clostridium piliforme in clinical samples
476
Development of a high-sensitivity quantitative analytical method for determining polycarbamate by gas chromatography-mass spectrometry incorporating temperature-programmable inlet on-column injection
477
Development of a high-speed camera system for neutron imaging at a pulsed neutron source
478
Development of a high-speed camera system for neutron imaging at a pulsed neutron source
479
Development of a high-speed CNC cutting machine using linear motors
480
Development of a high-speed cryogenic tribometer: Design concept and experimental results
481
Development of a High-Speed Manufacturing Method for Electroplated Diamond Wire Tools
482
Development of a high-speed single-photon pixellated detector for visible wavelengths
483
Development of a high-speed single-photon pixellated detector for visible wavelengths
484
Development of a high-speed switching system for distribution networks
485
Development of a high-temperature air-blown gasification system
486
Development of a high-throughput enzyme-linked immunosorbent assay for the routine detection of the carcinogen acrylamide in food, via rapid derivatisation pre-analysis Original Research Article
487
Development of a high-throughput LC/APCI-MS method for the determination of thirteen phytoestrogens including gut microbial metabolites in human urine and serum
488
Development of a high-throughput method for the determination of ethosuximide in human plasma by liquid chromatography mass spectrometry
489
Development of a high-throughput method for the determination of organochlorinated compounds, nitromusks and pyrethroid insecticides in indoor dust
490
Development of a high-throughput screening assay for stearoyl-CoA desaturase using rat liver microsomes, deuterium labeled stearoyl-CoA and mass spectrometry Original Research Article
491
Development of a high-throughput screening method for racemase activity and its application to the identification of alanine racemase variants with activity towards l-arginine
492
Development of a high-throughput thermoelectric screening tool for combinatorial thin film libraries
493
Development of a high-throughput ultra performance liquid chromatography–mass spectrometry assay to profile 18 eicosanoids as exploratory biomarkers for atherosclerotic diseases
494
Development of a highway noise prediction model using an Leq20 s measure of basic vehicular noise
495
Development of a highway traffic noise prediction model that considers various road surface types
496
Development of a High-Yield Process for Scalable Extraction of Beta-Glucan from Baker’s Yeast
497
Development of a hip wear simulation rig including micro-separation
498
Development of a hollow cylinder test for the elastic modulus distribution and the ultimate strength of bamboo
499
Development of a hollow fiber membrane module for using implantable artificial lung
500
Development of a hollow fibre liquid phase microextraction method to monitor the sonochemical degradation of explosives in water
501
Development of a hollow fibre liquid phase microextraction method to monitor the sonochemical degradation of explosives in water Original Research Article
502
Development of a holographic sensor for the detection of calcium dipicolinate—A sensitive biomarker for bacterial spores
503
Development of a home enteral nutrition (HEN) patient database for Sydney West Area Health Service
504
Development of a home-made extraction device for vortex-assisted surfactant-enhanced-emulsification liquid–liquid microextraction with lighter than water organic solvents
505
DEVELOPMENT OF A HOMOGENEOUS PHOSPHORESCENT IMMUNOASSAY FOR THE DETECTION OF POLYCHLORINATED DIBENZOp-DIOXINS
506
Development of a homogeneous pulse shape discriminating flow-cell radiation detection system
507
Development of a homogeneous pulse shape discriminating flow-cell radiation detection system
508
Development of a Hookah Smoking Obscenity Measurement Scale for Adolescents
509
Development of a horizontally and vertically focused neutron monochromator using stacked elastically bent Si single crystals
510
Development of a horizontally and vertically focused neutron monochromator using stacked elastically bent Si single crystals
511
Development of a hot tear indicator for steel castings
512
Development of a hot water reconstitutable appetizer soup mix from Coleus aromaticus using response surface methodology
513
Development of a housing performance evaluation model for multi-family residential buildings in Korea
514
Development of a HTS magnet and application to a beam scanner
515
Development of a HTS magnet and application to a beam scanner
516
Development of a Human Light Chain Variable Domain (VL) Intracellular Antibody Specific for the Amino Terminus of Huntingtin via Yeast Surface Display
517
Development of a Humidification–Dehumidification System in a Quonset Greenhouse for Sustainable Crop Production in Arid Regions
518
Development of a hybrid battery system for an implantable biomedical device, especially a defibrillator/cardioverter (ICD)
519
Development of a hybrid coating process as an advanced surface modification for cutting tools and moulds
520
Development of a hybrid coating process for deposition of diamond-like carbon films on microdrills
521
Development of a hybrid compressed gas engine/PEFC power system using the dissociation expansion characteristics of gas hydrate
522
Development of a hybrid computer model for simulating the complicated virtual sound field in enclosures
523
Development of a hybrid fermentation–enzymatic bioprocess for the production of ethyl lactate from dairy waste
524
Development of a hybrid finite element model for individual simulation of intertrochanteric osteotomies
525
Development of a hybrid helical microwiggler with four poles per period
526
Development of a hybrid image processing algorithm for automatic evaluation of intramuscular fat content in beef M. longissimus dorsi
527
Development of a hybrid margin angle controller for HVDC continuous operation
528
Development of a hybrid meta-heuristic algorithm for combinatorial optimisation and its application for optimal design of laminated composite cylindrical skirt
529
Development of a hybrid method for estimating land surface shortwave net radiation from MODIS data
530
Development of a hybrid methodology for dimensionality reduction in Mahalanobis–Taguchi system using Mahalanobis distance and binary particle swarm optimization
531
Development of a hybrid MSGC detector for thermal neutron imaging with a MHz data acquisition and histogramming system
532
Development of a hybrid MSGC detector for thermal neutron imaging with a MHz data acquisition and histogramming system
533
Development of a hybrid neural network system for prediction of process parameters in injection moulding
534
Development of a hybrid photo-diode and its front-end electronics for the BTEV experiment
535
Development of a hybrid photo-diode and its front-end electronics for the BTEV experiment
536
Development of a hybrid phototube with ZnO:Ga luminescent screen and GaN photocathode
537
Development of a hybrid phototube with ZnO:Ga luminescent screen and GaN photocathode
538
Development of a hybrid PIG-ECR ion source
539
Development of a hybrid pneumatic-power vehicle
540
Development of a hybrid refrigerator combining thermoelectric and vapor compression technologies
541
Development of a hybrid sectional quadrature-based moment method for solving population balance equations
542
Development of a hybrid vibration experiment system for determining wind-induced responses of buildings with tuned dampers
543
Development of a hybrid pneumatic-power vehicle
544
Development of a Hybridized Model for Predicting the Life Span of Power Transformers
545
Development of a Hydraulic Circulation Sub as a Tool to Prevent Mud Losses During Well Drilling
546
Development of a hydraulic control mechanism for cyclic pitch marine current turbines
547
Development of a hydrocarbon completion system for wells with low bottomhole temperatures for conditions of oil and gas fields in Eastern Siberia
548
Development of a hydrodynamic model of the Bay of Biscay. Validation of hydrology
549
Development of a hydrogen absorbing layer in the outer shell of high pressure hydrogen tanks
550
Development of a hydrogen catalytic heater for heating metal hydride hydrogen storage systems
551
Development of a hydrogen fuelling infrastructure in the Northeast U.S.A.
552
Development of a hydrogen permeation sensor for future tritium applications
553
Development of a Hydrogen Selective Ceramic Membrane and Its Application for the Conversion of Greenhouse Gases
554
Development of a hydrometallurgical route for the recovery of zinc and manganese from spent alkaline batteries
555
Development of a hydrophilic interaction chromatography–mass spectrometry assay for spectinomycin and lincomycin in liquid hog manure supernatant and run-off from cropland
556
Development of a hydrophilic interaction liquid chromatography–mass spectrometry method for detection and quantification of urea thermal decomposition by-products in emission from diesel engine employing selective catalytic reduction technology
557
Development of a hydrophilic PES ultrafiltration membrane containing SiO2@N-Halamine nanoparticles with both organic antifouling and antibacterial properties Original Research Article
558
Development of a hydrophilic polymer membrane containing silver nanoparticles with both organic antifouling and antibacterial properties
559
Development of a hydrothermal time seed germination model which uses the Weibull distribution to describe base water potential
560
Development of a hydrothermal time seed germination model which uses the Weibull distribution to describe base water potential
561
Development of a hydroxyl radical ratiometric nanoprobe
562
Development of a hyena immunology toolbox
563
Development of a hyena immunology toolbox
564
Development of a hyperparasitoid wasp in different stages of its primary parasitoid and secondary herbivore hosts
565
Development of a Hyphenated Method Called DLLME/TLM for Trace Analysis of Cd
566
Development of a hyphenated procedure of heat-reflux and ultrasound-assisted extraction followed by RP-HPLC separation for the determination of three flavonoids content in Scutellaria barbata D. Don
567
Development of a IRSN code for dust mobilisation problems in ITER
568
Development of a jar testing protocol for chemical phosphorus removal in activated sludge using statistical experimental design
569
Development of a Joint Economic Lot Size Model for Vendor-Buyer with Normal Demand and Empirical Delivery Time with Service level and Incremental Discount
570
Development of a joint economic lot size model with stochastic demand within non-equal shipments
571
Development of a J-shaped pneumatic valve to control the solid particle circulation rate in a circulating fluidized bed
572
Development of a KBS for personal financial planning guided by pragmatic KADS
573
Development of a kinematically focused neutron source with the p(7Li,n)7Be inverse reaction
574
Development of a kinematically focused neutron source with the p(7Li,n)7Be inverse reaction
575
Development of a kinetic basis for bioavailability of sorbed naphthalene in soil slurries
576
Development of a kinetic model for bainitic isothermal transformation in transformation-induced plasticity steels Original Research Article
577
Development of a kinetic model for Fischer–Tropsch synthesis over Co/Ni/Al2O3 catalyst
578
Development of a knowledge base as a tool for contextualized learning
579
Development of a knowledge base for ESOL teacher education
580
Development of a knowledge based hybrid neural network (KBHNN) for studying the effect of diafiltration during ultrafiltration of whey Original Research Article
581
Development of a knowledge based multimedia DBMS schema architecture
582
Development of a knowledge management initiative and system: A case study
583
Development of a knowledge scale about breast cancer and heredity (BCHK)
584
Development of a knowledge scale about breast cancer and heredity (BCHK)
585
Development of a knowledge-based expert system for solving metal cutting problems
586
Development of a knowledge-based self-assessment system for measuring organisational performance
587
Development of a Korean HyperthyroidismSpecific Health Status Scale
588
Development of a k–ε model for the determination of air exchange rates for street canyons
589
Development of a label-free electrochemical immunosensor based on carbon nanotube for rapid determination of clenbuterol
590
Development of a laboratory AC-DC simulator for on-line control study
591
Development of a Laboratory Clarifier Test to Predict Full Scale Primary Clarifier Performance
592
Development of a laboratory exposure system using marine fish to carry out realistic effect studies with produced water discharged from offshore oil production
593
Development of a laboratory method to predict plant flash flotation performance
594
Development of a laboratory model of activated charcoal–nitrogen adsorption cryocooler Original Research Article
595
Development of a laboratory model screw press for peanut oil expression Original Research Article
596
Development of a laboratory spectral backscattering instrument: design and simulation
597
Development of a laboratory system to investigate and store electrical energy from the vibrations of a piezoelectric beam
598
Development of a laboratory test to characterise the behaviour of free gold for use in a combined flash flotation and gravity concentrator model
599
Development of a lab-scale, high-resolution, tube-generated X-ray computed-tomography system for three-dimensional (3D) materials characterization
600
Development of a laccase/syringaldazine system for NAD(P)H oxidation
601
Development of a laccase-based flow injection electrochemical biosensor for the determination of phenolic compounds and its application for monitoring remediation of Kraft E1 paper mill effluent Original Research Article
602
Development of a Lake Eutrophication model
603
Development of a Lake Eutrophication model
604
Development of a land use extraction expert system through morphological and spatial arrangement analysis
605
Development of a land use extraction expert system through morphological and spatial arrangement analysis
606
Development of a Laplacian-based mesh generator for ALE calculations in rotary volumetric pumps and compressors Original Research Article
607
Development of a large area photodetector with a fast phosphor anode
608
Development of a large area photodetector with a fast phosphor anode
609
Development of a large area, curved two-dimensional detector for single-crystal neutron diffraction studies
610
Development of a large area, curved two-dimensional detector for single-crystal neutron diffraction studies
611
Development of a large format charge-coupled device (CCD) for applications in X-ray astronomy
612
Development of a large format charge-coupled device (CCD) for applications in X-ray astronomy
613
Development of a large high-performance 2-D array of GaAs-AlGaAs multiple quantum-well modulators
614
Development of a large sonochemical reactor at a high frequency
615
Development of a large titanium bone chamber to study in vivo bone ingrowth
616
Development of a large volume zero boil-off liquid xenon storage system for muon rare decay experiment (MEG) Original Research Article
617
Development of a large-area aerogel Čherenkov counter onboard BESS
618
Development of a large-area aerogel Čherenkov counter onboard BESS
619
Development of a large-area monolithic 4×4 MPPC array for a future PET scanner employing pixelized Ce:LYSO and Pr:LuAG crystals
620
Development of a large-area monolithic 4×4 MPPC array for a future PET scanner employing pixelized Ce:LYSO and Pr:LuAG crystals
621
Development of a large-scale TEG for evaluation and analysis of yield and variation
622
Development of a large-sized, long-life, valve-regulated lead–acid battery
623
Development of a large-volume, membrane-based injection system for gradient elution micro-liquid chromatography
624
Development of a Laser Ablation System Kit (LASK) for Tokamak in vessel tritium and dust inventory control
625
Development of a laser displacement probe to measure particle impact velocities in vibrationally fluidized granular flows
626
Development of a Laser IInterferometric Dilatometer for Measurements of Thermal Expansion of Solids in the Temperature Range 300 to 1300 K
627
Development of a laser in situ airborne hygrometer (LISAH)
628
Development of a laser Raman spectrometer for deep-ocean science
629
Development of a laser shock adhesion test for the assessment of weak adhesive bonded CFRP structures
630
Development of a laser wire beam profile monitor (2)
631
Development of a laser wire beam profile monitor (2)
632
Development of a laser-induced fluorescence imaging system for root activity and rhizosphere visualisation
633
Development of a laser-induced plasma probe to measure gas phase plasma signals at high pressures and temperatures
634
Development of a laser-induced plasma probe to measure gas phase plasma signals at high pressures and temperatures
635
Development of a laser-produced plasma target for beam–plasma interaction researches
636
Development of a laser-produced plasma target for beam–plasma interaction researches
637
Development of a Laser-Scattering-Based Probe for On-Line Measurement of Surface Roughness
638
Development of a Lateral Flow Immunoassay Using Recombinant Dense Granular Antigen (GRA) 7 to Detect AntiToxoplasma gondii IgG Antibodies
639
Development of a Latex Agglutination Test as a Simple and Rapid Method for Diagnosis of Trichomonas vaginalis Infection
640
Development of a LC/MS/MS method for the analysis of cannabinoids in human EDTA-plasma and urine after small doses of Cannabis sativa extracts
641
Development of a LC/MS/MS method to analyze butyrylcholinesterase inhibition resulting from multiple pesticide exposure
642
Development of a LC-MS/MS Method for the Determination of Narcotic Drugs and Psychotropic Substances in Human Hair
643
Development of a LC–MS/MS method to monitor palmitoyl peptides content in anti-wrinkle cosmetics Original Research Article
644
Development of a leaching protocol for concrete
645
Development of a lead-acid battery for a hybrid electric vehicle
646
Development of a Leaf-Level Canopy Assimilation Model for CERES-Maize
647
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method
648
Development of a lens-coupled CMOS detector for an X-ray inspection system
649
Development of a lens-coupled CMOS detector for an X-ray inspection system
650
Development of a Lesion-Mimic Phenotype in a Transgenic Wheat Line Overexpressing Genes for Pathogenesis-Related (PR) Proteins Is Dependent on Salicylic Acid Concentration
651
Development of a Level 1 Track Trigger for the CMS experiment at the high-luminosity LHC
652
Development of a Level 1 Track Trigger for the CMS experiment at the high-luminosity LHC
653
Development of a level set methodology to simulate grain growth in the presence of real secondary phase particles and stored energy – Application to a nickel-base superalloy
654
Development of a Life Cycle Assessment Program for building (SUSB-LCA) in South Korea
655
Development of a life cycle assessment tool for construction and maintenance of asphalt pavements
656
Development of a life cycle cost estimate system for structures of light rail transit infrastructure
657
Development of a light readout based on silicon photomultipliers for a wavelength-shifting fibre gamma camera
658
Development of a light readout based on silicon photomultipliers for a wavelength-shifting fibre gamma camera
659
Development of a light scatter sensor technology for on-line monitoring of milk coagulation and whey separation Original Research Article
660
Development of a lightweight and adaptable multiple-axis hand prosthesis
661
Development of a lightweight deployable/stowable radiator for interplanetary exploration
662
Development of a lightweight epoxy asphalt mixture for bridge decks
663
Development of a lightweight fuel cell vehicle
664
Development of a lightweight low-current 10 K 4 T magnet for space-flight ADRs Original Research Article
665
Development of a lightweight space debris shield using high strength fibers
666
Development of a Likert Type Attitude Scale in Health Sciences
667
Development of a linear brushless DC motor drive with robust position control
668
Development of a Linear Corona Torch Discharge
669
Development of a linear dominance hierarchy in nestling birds
670
Development of a linear electrostrictive servo motor
671
Development of a linear motion antenna for the JT-60SA ECRF system
672
Development of a linear predictive model for carbon dioxide sequestration in deep saline carbonate aquifers
673
Development of a line-narrowed and frequency-stabilized TDL system for sub-Doppler molecular spectroscopy
674
Development of a lion-specific interferon-gamma assay
675
Development of a lion-specific interferon-gamma assay
676
Development of a lipid profiling system using reverse-phase liquid chromatography coupled to high-resolution mass spectrometry with rapid polarity switching and an automated lipid identification software
677
Development of a lipid-rich, soft plaque in rabbits, monitored by histology and intravascular ultrasound
678
Development of a liquid 3He target for experimental studies of antikaon–nucleon interaction at J-PARC
679
Development of a liquid 3He target for experimental studies of antikaon–nucleon interaction at J-PARC
680
Development of a liquid chromatographic method for bioanalytical applications with sildenafil
681
Development of a liquid chromatographic–tandem mass spectrometric method with precolumn derivatization for the determination of dencichine in rat plasma Original Research Article
682
Development of a liquid chromatography method for the determination of linezolid and its application to in vitro and human microdialysis samples
683
Development of a liquid chromatography tandem mass spectrometry method for simultaneous determination of eight adulterants in slimming functional foods
684
Development of a liquid chromatography tandem mass spectrometry method for trace analysis of trisiloxane surfactants in the aqueous environment: An alternative strategy for quantification of ethoxylated surfactants
685
Development of a liquid chromatography/negative-ion electrospray tandem mass spectrometry assay for the determination of cilnidipine in human plasma and its application to a bioequivalence study
686
Development of a liquid chromatography/tandem mass spectrometry assay for the determination of bestatin in rat plasma and its application to a pharmacokinetic study
687
Development of a liquid chromatography-based screening methodology for proteolytic enzyme activity
688
Development of a liquid chromatography–electrospray chemical ionization tandem mass spectrometry analytical method for analysis of eleven hydroxylated polybrominated diphenyl ethers
689
Development of a liquid chromatography–electrospray ionization tandem mass spectrometry (LC–ESI MS/MS) method for the quantification of bioactive substances present in olive oil mill wastewaters Original Research Article
690
Development of a liquid chromatography–electrospray mass spectrometric method for the simultaneous analysis of benzoxazolinones and their degradation products
691
Development of a Liquid Chromatography-Electrospray-Tandem Mass Spectrometry Method for the Quantitative Determination of Benzoxazinone Derivatives in Plants
692
Development of a liquid chromatography–mass spectrometric method for measuring the binding of memantine to different melanins
693
Development of a liquid chromatography–mass spectrometry (LC/MS) assay method for the quantification of PSC 833 (Valspodar) in rat plasma
694
Development of a liquid chromatography–mass spectrometry method for monitoring the angiotensin-converting enzyme inhibitor lisinopril in serum
695
Development of a liquid chromatography–mass spectrometry method for the high-accuracy determination of creatinine in serum
696
Development of a liquid chromatography–tandem mass spectrometric method for the determination of methamphetamine and amphetamine using small volumes of rat serum
697
Development of a liquid chromatography–tandem mass spectrometry assay of six antimicrobials in plasma for pharmacokinetic studies in premature infants
698
Development of a liquid chromatography–tandem mass spectrometry method for the determination of 23 endogenous steroids in small quantities of primate urine
699
Development of a liquid chromatography–tandem mass spectrometry method for the identification of natural androgen steroids and their conjugates in urine samples
700
Development of a liquid chromatography–tandem mass spectrometry method for the identification of natural androgen steroids and their conjugates in urine samples Original Research Article
701
Development of a liquid chromatography–tandem mass spectrometry procedure for determination of endocrine disrupting compounds in fish from Mediterranean rivers
702
Development of a liquid chromatography-tandem mass spectrometry with pressurized liquid extraction for determination of glucocorticoid residues in edible tissues
703
Development of a liquid chromatography–tandem mass spectrometry with pressurized liquid extraction method for the determination of benzimidazole residues in edible tissues
704
Development of a liquid chromatography–tandem mass spectrometry with ultrasound-assisted extraction and auto solid-phase clean-up method for the determination of Fusarium toxins in animal derived foods
705
Development of a liquid chromatography–tandem mass spectrometry with ultrasound-assisted extraction method for the simultaneous determination of sudan dyes and their metabolites in the edible tissues and eggs of food-producing animals
706
Development of a liquid scintillator neutron multiplicity counter (LSMC)
707
Development of a liquid scintillator neutron multiplicity counter (LSMC)
708
Development of a liquid stub tuner for the KSTAR ICRF system
709
Development of a liquid stub tuner for the KSTAR ICRF system
710
Development of a liquid toner for electro-photographic solid freeform fabrication
711
Development of a liquid xenon scintillation detector for a new experiment to search for μ→eγ decays
712
Development of a liquid xenon scintillation detector for a new experiment to search for μ→eγ decays
713
Development of a liquid–chromatography tandem mass spectrometry and ultra-high-performance liquid chromatography high-resolution mass spectrometry method for the quantitative determination of zearalenone and its major metabolites in chicken and pig plasma
714
Development of a liquid–liquid extraction procedure for five 1,4-dihydropyridines calcium channel antagonists from human plasma using experimental design
715
Development of a liquid-xenon photon detector––towards the search for a muon rare decay mode at Paul Scherrer Institute Original Research Article
716
Development of A Literacy-Appropriate Health Education Package to Create Awareness of Periodontal Disease and Diabetes
717
Development of a live, attenuated, potential vaccine strain of R. equi expressing vapA and the virR operon, and virulence assessment in the mouse
718
Development of a live, attenuated, potential vaccine strain of R. equi expressing vapA and the virR operon, and virulence assessment in the mouse
719
Development of a Liver Phantom Based on Computed Tomography Images for Dosimetric Purpose
720
Development of a loading dock safety evaluation tool
721
Development of a load-insensitive ICRH antenna system on TEXTOR
722
Development of a LOCA analysis code for the supercritical-pressure light water cooled reactors
723
Development of a Local Model of Inclusive Education for Students with Special Needs in the Exceptional Education Organization
724
Development of a local real world driving cycle for motorcycles for emission factor measurements
725
Development of a local three-dimensional numerical simulation model for the laser forming process of aluminium components
726
Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser
727
Development of a localized probabilistic sensitivity method to determine random variable regional importance
728
Development of a localized probabilistic sensitivity method to determine random variable regional importance
729
Development of a locally designed and manufactured small-scale reverse osmosis desalination system Original Research Article
730
Development of a locking femur nail for mice
731
Development of a long life 35 Ah capacity VRLA battery for load-leveling applications
732
Development of a long reach articulated manipulator for ITER in vessel inspection under vacuum and temperature
733
Development of a long-lasting ventricular catheter impregnated with a combination of antibiotics
734
Development of a long-life capillary enzyme bioreactor for the determination of blood glucose
735
Development of a long-term monitoring system based on FBG sensors applied to concrete bridges
736
Development of a long-term stable organic membrane-based thin-film microsensor using new-type substrate surface treatment
737
Development of a long-wavelength fluorescent probe based on quinone–methide-type reaction to detect physiologically significant thiols Original Research Article
738
Development of A Loop-Mediated Isothermal Amplification (LAMP) Assay for Detection of Relapsing Fever Borreliae
739
Development of a loop-mediated isothermal amplification assay for rapid detection of Yersinia enterocolitica via targeting a conserved locus
740
Development of a loop-mediated isothermal amplification assay for the detection of Mycobacterium bovis
741
Development of a loop-mediated isothermal amplification method for rapid mass-screening of sand flies for Leishmania infection
742
Development of a low activation concrete shielding wall by multi-layered structure for a fusion reactor
743
Development of a Low Capital Investment Reactor System: Application for Plant Cell Suspension Culture
744
Development of a low charge-to-mass ratio injector for a RIB linac Original Research Article
745
DEVELOPMENT OF A LOW COST AND SAFE PIV FOR MEAN FLOW VELOCITY AND REYNOLDS STRESS MEASUREMENTS
746
Development of a Low Cost Fuel Cell Inverter System With DSP Control
747
Development of a low cost planar detector for positron emission tomography
748
Development of a low cost planar detector for positron emission tomography
749
Development of a low cost star tracker for the SHEFEX mission
750
Development of a low cost Touch Trigger Probe for CNC Lathes
751
Development of a low cost, GPS-based upgrade to a standard handheld gamma detector for mapping environmental radioactive contamination
752
Development of a low data event timer for monitoring an advancing crack in fracture
753
Development of a low energy particle detector using a superconducting transition edge sensor
754
Development of a low energy particle detector using a superconducting transition edge sensor
755
Development of a low pH cementitious material to enlarge bioreceptivity
756
Development of a low pH fermentation strategy for fumaric acid production by Rhizopus oryzae
757
Development of a low Reynolds number enhanced heat transfer surface using flow visualization techniques
758
Development of a low temperature light paraffin isomerization catalysts with improved resistance to water and sulphur by combinatorial methods Original Research Article
759
Development of a low temperature SQUID gradiometer for magnetic microcalorimeters
760
Development of a low temperature SQUID gradiometer for magnetic microcalorimeters
761
Development of a low-color, color stable, dual cure dental resin
762
Development of a low-cost agricultural remote sensing system based on an autonomous unmanned aerial vehicle (UAV)
763
Development of a low-cost dish solar concentrator and its application in zeolite desorption
764
Development of A Low-Cost Method for Determination of Sulfide Ions in Aluminate Solution of Bayer Process and Sulfide Removal Using Nitrate from It
765
Development of a low-cost portable colorimeter for the estimation of fluoride in drinking water
766
Development of a Low-Cost Trackside System for Weighing in Motion and Wheel Defects Detection
767
Development of a low-cost two-stage technique for production of low-sulphur purified konjac flour
768
Development of a low-energy beam transport system at KBSI heavy-ion accelerator
769
Development of a low-energy beam transport system at KBSI heavy-ion accelerator
770
Development of a low-energy monoenergetic neutron source for applications in low-dose radiobiological and radiochemical research
771
Development of a lower body negative pressure box with an environmental control system for physiological studies Original Research Article
772
Development of a lower confidence limit for the number of signals
773
Development of a low-expansion bond coating for Ni-base superalloys
774
Development of a low-expansion bond coating for Ni-base superalloys
775
Development of a low-level background gamma-ray spectrometer by KRISS
776
Development of a low-level RF control system for PET cyclotron CYCIAE-14
777
Development of a low-level RF control system for PET cyclotron CYCIAE-14
778
Development of a low-moisture-content storage system for brown rice: Storability at decreased moisture contents
779
Development of a low-noise analog front-end ASIC for APD-PET detectors
780
Development of a low-noise analog front-end ASIC for APD-PET detectors
781
Development of a low-noise analog front-end ASIC for CdTe detectors
782
Development of a low-noise analog front-end ASIC for CdTe detectors
783
Development of a low-noise, two-dimensional amplifier array
784
Development of a low-noise, two-dimensional amplifier array
785
Development of a low-power thick-film gas sensor deposited by screen-printing technique onto a micromachined hotplate
786
Development of a low-sodium ready-to-eat desalted cod Original Research Article
787
Development of a low-temperature 3He compressor for superfluid 3He–4He mixtures Original Research Article
788
Development of a low-temperature germanium detector via mechanical cooling with a compact pulse-tube refrigerator
789
Development of a low-temperature germanium detector via mechanical cooling with a compact pulse-tube refrigerator
790
Development of a low-temperature two-stage fluidized bed incinerator for controlling heavy-metal emission in flue gases
791
Development of a LPG fuel processor for PEFC systems: Laboratory scale evaluation of autothermal reforming and preferential oxidation subunits
792
Development of a luminol-based chemiluminescence flow-injection method for the determination of dichlorvos pesticide
793
Development of a lymphocyte-transformation-assay for peripheral blood lymphocytes of the harbor porpoise and detection of cytokines using the reverse-transcription polymerase chain reaction
794
Development of a lymphocyte-transformation-assay for peripheral blood lymphocytes of the harbor porpoise and detection of cytokines using the reverse-transcription polymerase chain reaction
795
Development of a M13 bacteriophage-based SPR detection using Salmonella as a case study
796
DEVELOPMENT OF A MACHINE FOR COLD PULPING OF TOMATO
797
Development of a machine for the automatic sorting of pomegranate (Punica granatum) arils based on computer vision Original Research Article
798
Development of a machine integrated strain-based contact force sensor for pad foot soil compactors
799
Development of a machine learning technique for automatic analysis of seafloor image data: Case example, Pogonophora coverage at mud volcanoes
800
Development of a machine troubleshooting expert system via fuzzy multiattribute decision-making approach
801
Development of a machine vision system for automatic date grading using digital reflective near-infrared imaging Original Research Article
802
Development of a macroinvertebrate multimetric index for the assessment of low-land streams in the neotropics
803
Development of a macrophyte-based index of biotic integrity for Minnesota lakes
804
Development of a maglev lens driving actuator for off-axis control and adjustment of the focal point in laser beam machining
805
Development of a magnesium secondary alloy system for mixed magnesium post-consumer scrap
806
Development of a magnet power supply with sub-ppm ripple performance for J-PARC with a novel common-mode rejection method with an NPC inverter
807
Development of a magnet power supply with sub-ppm ripple performance for J-PARC with a novel common-mode rejection method with an NPC inverter
808
Development of a magnetic bead fluorescence microscopy immunoassay to detect and quantify Leptospira in environmental water samples
809
Development of a magnetic field model and insertion into a commercial electromagnetic simulator
810
Development of a magnetic focusing device for pulsed neutrons
811
Development of a magnetic focusing device for pulsed neutrons
812
Development of a magnetic particle immunoassay for polybrominated diphenyl ethers and application to environmental and food matrices Original Research Article
813
Development of a Magnetic Suspension Densimeter and Measurement of the Density of Toluene
814
Development of a magnetohydrodynamic simulation code satisfying the solenoidal magnetic field condition Original Research Article
815
Development of a magnetospheric state-based trapped radiation database Original Research Article
816
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
817
Development of a Magnetostrictive Torque Sensor for Milling Process Monitoring
818
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study
819
Development of a Maize Breakage Test Method using a Commercial Food Processor
820
Development of a major polygonal fault system in Upper Cretaceous chalk and Cenozoic mudrocks of the Sable Subbasin, Canadian Atlantic margin
821
Development of a malaria vaccine
822
Development of a Management Model for a Surface Waterlogged and Drainage Congested Area
823
Development of a mandarin fish Siniperca chuatsi fry cell line suitable for the study of infectious spleen and kidney necrosis virus (ISKNV)
824
Development of a manual method for the determination of mineral oil in foods and paperboard
825
Development of a manufacturing process for Zr-based spacer grid materials
826
Development of a market penetration forecasting model for Hydrogen Fuel Cell Vehicles considering infrastructure and cost reduction effects
827
Development of a marketing information system for supporting sales in a Tea-beverage market
828
Development of a Marking Composition Based on Nanoaluminum and Iron Ore Concentrate for Mixed Explosives and Their Subsequent Identification
829
Development of a Mars dust characterization instrument
830
Development of a maskless electrochemical texturing method
831
Development of a mass spectrometry method for the determination of a melanoma biomarker, 5-S-cysteinyldopa, in human plasma using solid phase extraction for sample clean-up
832
Development of a mass-producible glucose biosensor and flow-injection analysis system suitable for on-line monitoring during fermentations
833
Development of a master sintering curve for ThO2
834
Development of a material balance equation for coalbed methane reservoirs accounting for the presence of water in the coal matrix and coal shrinkage and swelling
835
Development of a mathematical expression for the variation of amorphization phenomenon during intensive milling of minerals
836
Development of a Mathematical Framework for Comparison of Underlay and Overlay Systems
837
Development of a Mathematical Method for Classifying and Comparing Tree Architecture Using Parameters from a Topological Model of a Trifurcating Botanical Tree
838
Development of a mathematical model and simulation of mass transfer of solar ethanol distillation in modified brewery tank
839
Development of a mathematical model by means of experimental design for alkylation of m-cresol with cyclopentene
840
Development of a mathematical model for a curved slat venetian blind with thickness
841
Development of a Mathematical Model for MAP Systems Applied to Nonrespiring Foods
842
Development of a mathematical model for online microextraction by packed sorbent under equilibrium conditions and its application for polycyclic aromatic hydrocarbon determination in water by gas chromatography–mass spectrometry
843
Development of a mathematical model for simulating gas and water vapor exchanges in modified atmosphere packaging with macroscopic perforations Original Research Article
844
Development of a Mathematical Model for Simulation of Macroalgae Farming in the Coastal Areas
845
Development of a Mathematical Model for Sustainable Closed-loop Supply Chain with Efficiency and Resilience Systematic Framework
846
Development of a mathematical model for the growth associated Polyhydroxybutyrate fermentation by Azohydromonas australica and its use for the design of fed-batch cultivation strategies
847
Development of a mathematical model for vacuum cooling of cooked meats Original Research Article
848
Development of a mathematical model that predicts the outcome of hormone therapy for prostate cancer
849
Development of a mathematical model to describe the transport of monocyte chemoattractant protein-1 through a three-dimensional collagen matrix
850
Development of a mathematical model to design an offshore wind and wave hybrid energy system
851
Development of a mathematical model to predict clean water head losses in hydrocyclone filters in drip irrigation systems using dimensional analysis
852
Development of a mathematical model to predict head losses from disc filters in drip irrigation systems using dimensional analysis
853
Development of a mathematical model to study the impacts of production and management policies on the herd dynamics and profitability of dairy goats
854
Development of a Matrix Solid Phase Dispersion methodology for the determination of triazine herbicides in mussels
855
Development of a matrix solid-phase dispersion method for the determination of polycyclic aromatic hydrocarbons in sewage sludge samples Original Research Article
856
Development of a matrix solid-phase dispersion method for the screening of polybrominated diphenyl ethers and polychlorinated biphenyls in biota samples using gas chromatography with electron-capture detection
857
Development of a matrix solid-phase dispersion method for the simultaneous determination of pyrethroid and organochlorinated pesticides in cattle feed
858
Development of a matrix solid-phase dispersion-sonication extraction method for the determination of fungicides residues in ginseng extract
859
Development of a matrix-assisted laser desorption ionization mass spectrometric method for rapid process-monitoring of phthalocyanine compounds Original Research Article
860
Development of a mayonnaise with chitosan as natural antioxidant
861
Development of a McAb-based immunoassay for parathion and influence of the competitor structure
862
Development of a measure model for optimal planning of maintenance and improvement of roads
863
Development of a measure of attitude toward nutrition in patient care Original Research Article
864
Development of a measure to assess coping for auditory hallucinations
865
Development of a measure to assess invalidating childhood environments in the eating disorders
866
Development of a measure to assess quality management in certified firms
867
Development of a measurement system of gap between CSB and RV to shorten a nuclear reactor installation period Original Research Article
868
Development of a measuring method for several types of programmed tool paths for NC machine tools using a laser displacement interferometer and a rotary encoder
869
Development of a measuring technique for simultaneous in situ detection of nanoscaled particle size distributions and gas temperatures
870
Development of a Meat-Like Process Flavoring from Soybean-Based Enzyme-Hydrolyzed Vegetable Protein (E-HVP)
871
Development of a mechanical device for concealing underground urban solid residual containers
872
Development of a mechanical earth model in an Iranian off-shore gas field
873
DEVELOPMENT OF A MECHANICAL FEEDING UNIT SUITABLE FOR ONION SEEDLINGS
874
Development of a mechanical transducer for real-time soil tilth sensing
875
Development of a mechanism for ontology-based product lifecycle knowledge integration
876
Development of a mechanism for transplanting rice seedlings
877
Development of a mechanistic model (ERIMO-I) for analyzing the temporal dynamics of the benthic community of an intermittent Mediterranean stream
878
Development of a mechanistic model (ERIMO-I) for analyzing the temporal dynamics of the benthic community of an intermittent Mediterranean stream
879
Development of a mechanistic model for prediction of emission of trace elements from coal-fired power plants
880
Development of a mechanistic-empirical prediction model for joint spalling distress in concrete pavements
881
Development of a mechatronics laboratory-eliminating barriers to manufacturing instrumentation and control
882
Development of a media literacy education programme for children based on activity theory
883
Development of a Medical CAD/CAM System for Orthopedic Surgery
884
Development of a membrane anaerobic system (MAS) for palm oil mill effluent (POME) treatment Original Research Article
885
Development of a Membrane Disinfection System for Closed Hydroponics in a Greenhouse
886
Development of a membrane dispersion micro-absorber for CO2 capture
887
Development of a membrane filtration method for enumeration of Listeria monocytogenes from soft cheese
888
Development of a membrane inlet mass spectrometric method for analysis of air samples
889
Development of a membrane reactor for decomposing hydrogen sulfide into hydrogen using a high-performance amorphous silica membrane
890
Development of a membrane reactor for the partial oxidation of hydrocarbons: direct oxidation of propane to acrolein
891
Development of a membrane respirometer
892
Development of a Membrane-Assisted Fluidized Bed Reactor. 1. Gas Phase Back-Mixing and Bubble-toEmulsion Phase Mass Transfer Using Tracer Injection and Ultrasound Experiments
893
Development of a Membrane-Assisted Fluidized Bed Reactor. 2. Experimental Demonstration and Modeling for the Partial Oxidation of Methanol
894
Development of a membraneless extraction module for the extraction of volatile compounds: Application in the chromatographic analysis of vicinal diketones in beer
895
Development of a mercuric iodide detector array for medical imaging applications
896
Development of a mercury ion-selective optical sensor based on fluorescence quenching of 5,10,15,20tetraphenylporphyrin
897
Development of a mercury ion-selective optical sensor based on fluorescence quenching of 5,10,15,20-tetraphenylporphyrin Original Research Article
898
Development of a mercury optical sensor based on immobilization of 4-(2-pyridylazo)-resorcinol on a triacetylcellulose membrane
899
Development of a meshless hybrid boundary node method for Stokes flows
900
Development of a mesoscopic particle model for synthesis of uranium-ceramic nuclear fuel
901
Development of a Message-Oriented Middleware for a Heterogeneous Distributed Database Systems
902
Development of a metabolic network design and optimization framework incorporating implementation constraints: A succinate production case study
903
Development of a Metabolism Factor for Polycyclic Aromatic Hydrocarbons for Use in Multipathway Risk Assessments of Hazardous Waste Combustion Facilities
904
Development of a metal hydride refrigeration system as an exhaust gas-driven automobile air conditioner
905
Development of a metal recovery process from Li-ion battery wastes
906
Development of a metallic/ceramic composite for the deposition of thin-film oxygen transport membrane
907
Development of a metastable phase diagram to describe solidification in undercooled Fe–Co melts
908
Development of a metastable phase diagram to describe solidification in undercooled Fe–Co melts
909
Development of a meteorological illuminance model for daylight computations
910
Development of a methanogenic process to degrade exhaustively the organic fraction of municipal "grey waste" under thermophilic and hyperthermophilic conditions
911
Development of a methanol fuelled reformer for fuel cell applications
912
Development of a method based on inductively coupled plasma-dynamic reaction cell-mass spectrometry for the simultaneous determination of phosphorus, calcium and strontium in bone and dental tissue
913
Development of a method based on inductively coupled plasma-dynamic reaction cell-mass spectrometry for the simultaneous determination of phosphorus, calcium and strontium in bone and dental tissue
914
Development of a method based on on-line reversed phase liquid chromatography and gas chromatography coupled by means of an adsorption–desorption interface for the analysis of selected chiral volatile compounds in methyl jasmonate treated strawberries
915
Development of a method based on particle swarm optimization to solve resource constrained project scheduling problem
916
Development of a method based on sorbent trapping followed by solid-phase microextraction for the determination of synthetic musks in indoor air
917
Development of a Method Based on the Needle-trap Microextraction Filled with Hydroxyapatite and Polyaniline Nanocomposite for Determination of Volatile Organic Compounds in the Air
918
Development of a method employing stable isotope dilution tandem mass spectrometry for the simultaneous measurement of C13- and C12-thyroxine in human serum or plasma
919
DEVELOPMENT OF A METHOD FOR DETERMINING THE SIZE OF CLEARANCE IN SLIDING BEARINGS
920
Development of a Method for a Sensitive Simultaneous Determination of Acetaminophen and Tryptophan in Biological Samples
921
Development of a method for analysing energy, environmental and economic efficiency for an integrated steel plant
922
Development of a method for analysis of Iranian damask rose oil: Combination of gas chromatography–mass spectrometry with Chemometric techniques Original Research Article
923
Development of a method for automatic basso continuo playing
924
Development of a method for biohydrogen production from wheat straw by dark fermentation
925
Development of a method for butter type differentiation by electronic nose technology
926
Development of a method for calculating steady-state equipment sensible heat ratio of direct expansion air conditioning units
927
Development of a method for calculating steady-state equipment sensible heat ratio of direct expansion air conditioning units
928
Development of a method for comprehensive and quantitative analysis of plant hormones by highly sensitive nanoflow liquid chromatography–electrospray ionization-ion trap mass spectrometry Original Research Article
929
Development of a method for concentrating and detecting rotavirus in oysters
930
DEVELOPMENT OF A METHOD FOR DETERMINATION OF VOLATILE ORGANIC COMPOUNDS (C6-C9) BY THERMAL DESORPTION-GAS CHROMATOGRAPHY. APPLICATION TO URBAN AND RURAL ATMOSPHERES.
931
Development of a method for direct visual determination of aflatoxin production by colonies of the Aspergillus flavus group
932
Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions Original Research Article
933
Development of a method for estimating the likelihood of finger flow and lateral flow in Canadian agricultural landscapes
934
Development of a Method for Estimating Thermal Conductivity of Organic Deposits on the Wax Flow Loop Laboratory Installation
935
Development of a method for fast analysis of phenolic molecular markers in biomass burning particles using high performance liquid chromatography/atmospheric pressure chemical ionisation mass spectrometry
936
Development of a method for generating operational solar radiation maps from satellite data for a tropical environment
937
Development of a method for identification and accurate quantitation of aroma compounds in Chinese Daohuaxiang liquors based on SPME using a sol–gel fibre
938
Development of a method for liquid xenon purification using a cryogenic centrifugal pump Original Research Article
939
Development of a method for measurement of relative solubility of nonionic surfactants
940
Development of a Method for Pb Functionalization and Preparing Immunogenic Complex
941
Development of a method for quantification of hot-spots
942
Development of a method for sample preparation for subsequent identification and measurement of 1,2,3,4-tetrahydroisoquinolines and other potentially neurotoxic compounds by high-performance liquid chromatography with ultraviolet and fluorescence detectio
943
Development of a method for separation of PVC and PET using flame treatment and flotation
944
Development of a method for sequential Si extraction from soils
945
Development of a method for the analysis of drugs of abuse in vitreous humor by capillary electrophoresis with diode array detection (CE–DAD)
946
Development of a method for the analysis of nucleotides from the mantle tissue of the mussel Mytilus galloprovincialis
947
Development of a method for the analysis of PCB Congeners and organochlorine pesticides in blood/serum
948
Development of a method for the analysis of seven banned azo-dyes in chilli and hot chilli food samples by pressurised liquid extraction and liquid chromatography with electrospray ionization-tandem mass spectrometry
949
Development of a method for the analysis of underivatized amino acids by liquid chromatography/tandem mass spectrometry: Application on Standard Reference Material 1649a (urban dust)
950
Development of a method for the determination of 9 currently used cotton pesticides by gas chromatography with electron capture detection
951
Development of a Method for the Determination of Fusarium Fungi on Corn Using Mid-Infrared Spectroscopy with Attenuated Total Reflection and Chemometrics
952
Development of a Method for the Determination of Human Skin Moisture Using a Portable Near-Infrared System
953
Development of a method for the determination of low levels of technetium-99
954
Development of a method for the determination of UV filters in water samples using stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry
955
Development of a method for the efficient release of N-glycans from glycoproteins generating native deglycosylated proteins
956
Development of a method for the identification of azaspiracid in shellfish by liquid chromatography–tandem mass spectrometry
957
Development of a method for the identification of scombroid and common substitute species in seafood products by FINS
958
Development of a Method for the Preparation of α-Azido-Masked Acyl Cyanides, Synthetic Equivalents of N-Protected–C-Activated α-Amino Acids
959
Development of a method for the production of hemicellulosic gels from Sitka spruce
960
Development of a method for the quantification of d-glucaric acid in different varieties of grapefruits by high-performance liquid chromatography and mass spectra
961
Development of a method for the quantification of whey allergen traces in mixed-fruit juices based on liquid chromatography with mass spectrometric detection
962
Development of a method for the simultaneous analysis of anionic and non-ionic surfactants and their carboxylated metabolites in environmental samples by mixed-mode liquid chromatography–mass spectrometry
963
Development of a method for the simultaneous determination of phosphoric and amino acid group containing pesticides by gas chromatography with mass-selective detection: Optimization of the derivatization procedure using an experimental design approach
964
Development of a method for the systematic use of bilinear multivariate calibration methods for the correction of interferences in inductively coupled plasma-mass spectrometry
965
Development of a method for time-resolved measurement of airborne acrolein
966
Development of a method for total plasma thiols measurement using a disposable screen-printed carbon electrode coupled with a MnO2 reactor
967
Development of a method for water determination in lactose
968
Development of a method of evaluating an inventory of fission products for a pebble bed reactor
969
Development of a method of measuring cellular stress in cattle and sheep
970
Development of a method of measuring cellular stress in cattle and sheep
971
Development of a method predicting the oxidative stability of edible oils using 2,2-diphenyl-1-picrylhydrazyl (DPPH)
972
Development of a method to assay the microbial population in heap bioleaching operations
973
Development of a method to determine Ni and Cd in biodiesel by graphite furnace atomic absorption spectrometry
974
Development of a Method to Label Forages used in Passage Rate Studies in the Horse
975
Development of a method to manufacture uncured, no-nitrate/nitrite-added whole muscle jerky
976
Development of a method to measure free and bound ropivacaine in human plasma using equilibrium dialysis and Hydrophilic interaction chromatography coupled to high resolution mass spectrometry
977
Development of a Method to Obtain More Accurate General and Oral Health Related Information Retrospectively
978
Development of a method to predict the heat island potential using remote sensing and GIS data
979
Development of a method to quantify in vitro the synergistic activity of “natural” antimicrobials
980
Development of a method to quantify sucrose in soybean grains
981
Development of a method to recovery and amplification DNA by real-time PCR from commercial vegetable oils
982
Development of a Method to Risk Stratify Patients With Heart Failure for 30-Day Readmission Using Implantable Device Diagnostics
983
Development of a method which discriminates between endogenous and exogenous β-boldenone Original Research Article
984
Development of a Methodology Based on Metal-Catalyzed Oxidation Reactions and Mass Spectrometry To Determine the Metal Binding Sites in Copper Metalloproteins
985
Development of a methodology for a simplified finite element model and optimum design
986
Development of a methodology for assessing the environmental impact of radioactivity in Northern Marine environments
987
Development of a methodology for benchmarking public transportation organisations: a practical tool based on an industry sound methodology
988
Development of a methodology for cost determination of wastewater treatment based on functional diagram
989
Development of a methodology for determination of interface fracture toughness of laminate composites—the 0°/90° pair
990
Development of a methodology for evaluating air pollution options for improving the air quality in Mexico City
991
Development of a methodology for in situ assessment of topsoil dry bulk density
992
Development of a methodology for life cycle building energy ratings
993
Development of a methodology for non-contacting strain measurements in fluid environments using computer vision
994
Development of a methodology for selecting office building upgrading solutions based on a test survey in European buildings
995
Development of a Methodology for the Calculation of Youngʹs Modulus of Eggshell using Vibration Measurements
996
Development of a methodology for the quantification of particle number and gaseous concentrations in a bidirectional bus tunnel and the derivation of emission factors
997
Development of a methodology for the simultaneous determination of inorganic and organolead compounds using supercritical fluid extraction followed by gas chromatography–mass spectrometry and its application to environmental matrices
998
Development of a methodology to characterize radon entry in dwellings
999
Development of a methodology to estimate error in the on-line measurements of blend uniformity in a continuous powder mixing process
1000
Development of a Methodology to Identify Crucial Emergency Stations for Quick Relief Response to the Damaged Urban Areas Following an Earthquake (Case Study: Isfahan City Center)