بر اساس عنوان

1
Development of an automated phase behaviour measurement system for lean hydrocarbon fluid mixtures, using re-entrant rf/microwave resonant cavities
2
Development of an automated procedure for estimation of the spatial variation of runoff in large river basins
3
Development of an automated region-of-interest-setting method based on a deep neural network for brain perfusion single photon emission computed tomography quantification methods
4
Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry Original Research Article
5
Development of an automated synthesis apparatus for image-[3-11C] labeled aromatic amino acids
6
Development of an automated system for fuel reload patterns design
7
Development of an automated system for fuel reload patterns design
8
Development of an automated system for fuel reload patterns design Original Research Article
9
Development of an automated system for synthesizing 18F-labeled compounds using [18F]fluoroethyl bromide as a synthetic precursor
10
Development of an automated system for the quick production of 13N-labeled compounds with high specific activity using anhydrous [13N]NH3
11
Development Of An Automated Tool For Detecting Errors In Tenses
12
Development of an automatic and mobile X-ray robot: An innovative approach to medical imaging through mechatronics
13
Development of an automatic blowing-snow station
14
Development of an automatic chamber system for long-term measurements of CO2 flux from roots
15
Development of an automatic characterisation system for silicon detectors
16
Development of an automatic characterisation system for silicon detectors
17
Development of an automatic continuous analyzer for water-soluble gases in air by combining an artificial lung with an ion chromatograph
18
Development of an automatic customer service system on the internet
19
Development of an automatic high-throughput assay for tetracycline determination by using Eu2O3 nanoparticles and dry-reagent technology
20
Development of an Automatic Land Use Extraction System in Urban Areas using VHR Aerial Imagery and GIS Vector Data
21
Development of an Automatic Mold Polishing System
22
Development of an automatic multi-channel ink-jet ejection chemiluminescence system and its application to the determination of horseradish peroxidase Original Research Article
23
Development of an automatic multiple dynamic hollow fibre liquid-phase microextraction procedure for specific migration analysis of new active food packagings containing essential oils
24
Development of an Automatic Pallet Handling System for Seeded Trays
25
Development of an automatic rice-quality inspection system
26
Development of an Automatic Rolling System for Rice Seedlings
27
Development of an automatic sample changer for iMATERIA
28
Development of an automatic sample changer for iMATERIA
29
Development of an automatic self balancing control system for a tree climbing robot
30
Development of an automatic solid phase extraction and liquid chromatography mass spectrometry method by using a monolithic column for the analysis of Cyclosporin A in human plasma
31
Development of an automatic subsea blowout preventer stack control system using PLC based SCADA
32
Development of an automatic torque test to measure the shear bond strength between asphalt
33
Development of an Automation and Control Design System for Lowland Tropical Greenhouses
34
Development of an automation system to evaluate the three-dimensional oxygen distribution in wastewater biofilms using microsensors
35
Development of an autonomous detector for sensing of nerve agents based on functionalized silicon nanowire field-effect transistors
36
Development of an autonomous navigation system for an outdoor vehicle
37
Development of an Autonomous Navigation System using a Two-dimensional Laser Scanner in an Orchard Application
38
Development of an autonomous, wireless pH and temperature sensing system for monitoring pig meat quality
39
Development of an autonomous, wireless pH and temperature sensing system for monitoring pig meat quality
40
Development of an AutoWEP distributed hydrological model and its application to the upstream catchment of the Miyun Reservoir
41
Development of an avian influenza virus inactivation evaluation method using dialysis cassette in animal manure and mortality disposal systems
42
Development of an avian model for restenosis Original Research Article
43
Development of an axisymmetric wave packet in rotating-disk flow
44
Development of an EAM potential for simulation of radiation damage in Fe–Cr alloys
45
Development of an early intervention to prevent long-term incapacity for work: using an online RAND/UCLA appropriateness method to obtain the views of general practitioners
46
Development of an early warning system for a broiler house using computer vision
47
Development of an earthquake loss model for Turkish catastrophe insurance
48
Development of an Easy-to-Use Tool for the Assessment of Emergency Department Physical Design
49
Development of an eco-friendly agar extraction technique from the red seaweed Gracilaria lemaneiformis
50
Development of an Eco-Friendly Method for Iron Extraction and Determination in Pharmaceuticals Using Ciprofloxacin Drug as Chelating agent
51
Development of an eco-friendly optical sensor element based on tetraphenylporphyrin derivatives dispersed in biodegradable polymer: Effects of substituents of tetraphenylporphyrins on HCl detection and biodegradation
52
Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods
53
Development of an ecological mapping methodology for urban areas in New Zealand
54
Development of an ecological security evaluation method based on the ecological footprint and application to a typical steppe region in China
55
Development of an E-Commerce Chatbot for a University Shopping Mall
56
Development of an economical model to determine an appropriate feed-in tariff for grid-connected solar PV electricity in all states of Australia
57
Development of an e-Diagnostics/Maintenance framework for semiconductor factories with security considerations
58
Development of an edible coating based on chitosan-glycerol to delay ‘Berangan’ banana (Musa sapientum cv. Berangan) ripening process
59
Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner
60
Development of an Educational Model in Stimulating the Growth and Development of Children Aged 2-5 Years: Dick and Carey s Intervention Design
61
Development of an Educational Model of Emotional Regulation Based on Gross Emotional Regulation (ERT), Emotional Schema Therapy (EST), and Emotional Transformation Therapy (ETT) and its Effectiveness in Internet Addiction with Different Roles of Brain/ Behavioral Systems
62
Development of an Educational Software for Diagnosis in Oral Medicine and Evaluation of Dental Students’ Attitudes: An Educational Intervention
63
Development of an effective acidogenically digested swine manure-based algal system for improved wastewater treatment and biofuel and feed production
64
Development of an effective and practical Process Alteration Index (PAI) for predicting metallurgical responses of Cu porphyries
65
Development of an effective data-driven model for hourly typhoon rainfall forecasting
66
Development of an effective Edwardsiella tarda vaccine for cultured turbot (Scophthalmus maximus)
67
DEVELOPMENT OF AN EFFECTIVE ENERGY MANAGEMENT SYSTEM IN POWER PLANTS OF PAKISTAN
68
Development of an Effective Rent (Lease) Index for the Chicago CBD
69
Development of an effective sample preparation approach for proteomic analysis of silkworm eggs using two-dimensional gel electrophoresis and mass spectrometry
70
Development of an effective screening method for partial resistance to Alternaria brassicicola (dark leaf spot) in Brassica rapa
71
Development of an effective single-electron model of the electronic structure of hydronium and hydronium–water clusters
72
Development of an efficient aerodynamic shape optimization framework Original Research Article
73
Development of an efficient and low-cost protocol for the manual PNA synthesis by Fmoc chemistry
74
Development of an efficient and selective radioligand for bradykinin B1 receptor occupancy studies
75
Development of an Efficient and Sensitive Magnetic Dispersive Solid-phase Extraction Technique for Preconcentration of Amphetamine and Methamphetamine Determined by High-performance Liquid Chromatography and Liquid Chromatography-Tandem Mass Spectrometry in Sports Supplements
76
Development of an Efficient Approach for Reliability Analysis Using the Comparative Study of Several Static and Dynamic Methods; Case Study of an Unmanned Aerial Vehicle
77
Development of an efficient bioprocess for turanose production by sucrose isomerisation reaction of amylosucrase
78
Development of an efficient catalyst from magnetite ore: Characterization and catalytic potential in the ozonation of water toxic contaminants Original Research Article
79
Development of an efficient coherent optical source at 6.04 μm
80
Development of an Efficient Connector System for Fiber Reinforced Polymer Bridge Decks to Steel Girders
81
Development of an efficient grain refiner for Al–7Si alloy
82
Development of an efficient grain refiner for Al–7Si alloy
83
Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium
84
Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium
85
Development of an Efficient Hybrid Method for Motif Discovery in DNA Sequences
86
Development of an efficient hybrid model for range sidelobe suppression in pulse compression radar
87
Development of an efficient liquid-phase peptide synthesis protocol using a novel fluorene-derived anchor support compound with Fmoc chemistry; AJIPHASE®
88
Development of an efficient method for preparation of 1,3,5-trihydroxyisocyanuric acid (THICA) and its use as aerobic oxidation catalyst
89
Development of an efficient neural-based segmentation technique for Arabic handwriting recognition
90
Development of an efficient pretreatment process for enzymatic saccharification of Eastern redcedar
91
Development of an efficient process for the treatment of residual sludge discharged from an anaerobic digester in a sewage treatment plant
92
Development of an efficient protein phosphatase-based colorimetric test for okadaic acid detection Original Research Article
93
Development of an efficient scanning and purging magnet system for IMRT with narrow high energy photon beams
94
Development of an efficient scanning and purging magnet system for IMRT with narrow high energy photon beams
95
Development of an efficient simulation tool for multiproduct batch plant design
96
Development of an efficient Tissue Culture after Crossing (TCC) system for transgenic improvement of barley as a bioenergy crop
97
DEVELOPMENT OF AN EFFICIENT T-TYPE STRAINER WITH ITS PERFORMANCE EVALUATION
98
Development of an ejector cooling system with thermal pumping effect
99
Development of an electric field sensor based on second harmonic generation with electro-optic materials
100
DEVELOPMENT OF AN ELECTRIC SPRAYER FOR GREENHOUSE AND SMALL OPEN FIELD
101
Development of an electrical model for a PV/battery system for performance prediction
102
Development of an electrical tomographic system for operation in a remote, acidic and radioactive environment
103
Development of an electrochemical cell for the removal of Reactive Black 5 Original Research Article
104
Development of an electrochemical flow injection immunoassay (FIIA) for the real-time monitoring of biospecific interactions Original Research Article
105
Development of an Electrochemical Immunosensor for Direct Detection of Interferon-gamma at the Attomolar Level
106
Development of an electrochemical membrane-based nanobiosensor for ultrasensitive detection of dengue virus Original Research Article
107
Development of an electrochemical sensor based on nanostructured hausmannite-type manganese oxide for detection of sodium ions
108
Development of an Electrochemical Sensor for a Sensitive Determination of Metanil Yellow
109
Development of an electrochemical sensor for determination of dissolved oxygen by nickel–salen polymeric film modified electrode
110
Development of an electrochemical sulfite biosensor by immobilization of sulfite oxidase on conducting polyaniline film
111
Development of an electrochemically reduced graphene oxide modified disposable bismuth film electrode and its application for stripping analysis of heavy metals in milk
112
Development of an electrode for lead-acid batteries possessing a high electrochemical utilization factor and invariable cycling characteristics
113
Development of an electrodeionization process for removal of nitrate from drinking water Part 1: Single-species testing Original Research Article
114
Development of an electrodeionization process for removal of nitrate from drinking water Part 2: Multi-species testing Original Research Article
115
Development of an electromachining method for machining curved holes
116
Development of an electromagnetic fields risk communication plan
117
Development of an electromagnetic micro-generator
118
Development of an electromagnetic phase shifter using a pair of cut-core coils for a cross undulator
119
Development of an electromagnetic phase shifter using a pair of cut-core coils for a cross undulator
120
Development of an electron microprobe method for the determination of phosphorus and associated elements in sediments
121
Development of an electron optics simulator to consider the 3-D magnetic deflection field in CRTs
122
Development of an electronic board for a neutrino telescope project
123
Development of an electronic board for a neutrino telescope project
124
Development of an Electronic Information System for the Management of Laboratory Data of Tuberculosis and Atypical Mycobacteria at the Pasteur Institute in Côte d’Ivoire
125
Development of an electronic nose for fire detection
126
Development of an electronic nose for fire detection
127
Development of an electronic nose to identify and quantify volatile hazardous compounds
128
Development of an Electron-Tracking Compton Camera using CF4 gas at high pressure for improved detection efficiency
129
Development of an Electron-Tracking Compton Camera using CF4 gas at high pressure for improved detection efficiency
130
Development of an electro-optical system for small UAV
131
Development of an electroosmotic pump for high performance actuation
132
Development of an electroplating solution for codepositing Au–Sn alloys
133
Development of an electroplating solution for codepositing Au–Sn alloys
134
Development of an electrospray-63Ni-differential ion mobility spectrometer for the analysis of aqueous samples
135
Development of an electrospun nano-apatite/PCL composite membrane for GTR/GBR application
136
Development of an electrostatic beam focus lens equipped with electron suppression grids for a microwave ion source to inject high-current ion beams into a linac
137
Development of an electrostatic beam focus lens equipped with electron suppression grids for a microwave ion source to inject high-current ion beams into a linac
138
Development of an ELISA Based Method for the Detection of Pemphigus vulgaris Autoantibodies
139
Development of an ELISA for bovine IL-10
140
Development of an ELISA for bovine IL-10
141
Development of an ELISA for quantification of the antimicrobial peptide piscidin 4 and its application to assess stress in fish
142
Development of an ELISA for the detection of autoantibodies to BP230
143
Development of an ELISA procedure to study sorption of atrazine onto a sewage sludge-amended luvisol soil
144
Development of an ELISA sandwich assay for quantifying IFN-gamma in salmonids
145
Development of an ELISA screening test for nitroimidazoles in egg and chicken muscle Original Research Article
146
Development of an ELISA technique for the detection of Babesia ovis and serological survey of the parasite in Khouzestan province, southern Iran
147
Development of an ELISA Test for Detection of Anti FMD Virus Type A87/IRN Antibody Using Irradiated Antigen
148
Development of an ELISA to measure soluble CD163 in porcine biological fluids
149
Development of an ELISA to measure soluble CD163 in porcine biological fluids
150
Development of an ELISA to measure soluble CD163 in porcine biological fluids
151
Development of an ELISA to measure soluble CD163 in porcine biological fluids
152
Development of an ELISA to measure soluble CD163 in porcine biological fluids
153
Development of an ELISA to measure soluble CD163 in porcine biological fluids
154
Development of an ELISA to measure the humoral immune response of hybrid striped bass Morone chrysops*M. saxatilis to Streptococcus iniae
155
Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures
156
development of an embedded moisture sensing device for a distributive network to control irrigation using iot
157
Development of an embryo toxicity test with the pond snail Lymnaea stagnalis using the model substance tributyltin and common solvents Original Research Article
158
Development of an Emergency Department Trigger Tool
159
Development of an Emergency Department—Based Injury Surveillance System, , ,
160
Development of an emission factor for ammonia emissions from US swine farms based on field tests and application of a mass balance method
161
Development of an emission inventory system from transport in Greece
162
Development of an emission processing system for the Pearl River Delta Regional air quality modeling using the SMOKE model: Methodology and evaluation
163
Development of an emissions inventory model for mobile sources
164
Development of an emitter for industrial silicon solar cells using the doped oxide solid source diffusion technique
165
Development of an Emotional Divorce Model in Iranian Muslim Women Using Happiness, Religious Attitude, and Marital Satisfaction
166
Development of an emotional processing scale
167
Development of an empirical correlation for combustion durations in spark ignition engines
168
Development of an empirical dynamic model for a Nexa PEM fuel cell power module
169
Development of an Empirical Kinetics Model for Sono-Degradation of Malachite Green: Evaluation of Electrical Energy Per Order
170
Development of an empirical model for calculating sediment-transport capacity in shallow overland flows: Model calibration
171
Development of an empirical model for determining G*/sin δ in crumb rubber modified binders
172
Development of an empirical model to predict losses in eggplant (Solanum melongena L.) production caused by Verticillium wilt
173
Development of an empirical model to predict nitrogen dioxide concentrations from weather variables for sites across the UK
174
Development of an emulsion imaging system for cosmic-ray muon radiography to explore the internal structure of a volcano, Mt. Asama
175
Development of an emulsion imaging system for cosmic-ray muon radiography to explore the internal structure of a volcano, Mt. Asama
176
Development of an emulsion liquid membrane system for extraction of a neutral species
177
Development of an emulsion liquid membrane system for separation of acetic acid from succinic acid
178
Development of an encapsulated scintillating fiber detector as a 14-MeV neutron sensor
179
Development of an encapsulated scintillating fiber detector as a 14-MeV neutron sensor
180
Development of an Endcap DIRC for PANDA
181
Development of an Endcap DIRC for PANDA
182
Development of an end-game strategy towards apoptolidin: a sequential Suzuki coupling approach
183
Development of an energetic diagnosis method for the buildings: example of the Perugia University
184
Development of an energy boundary element formulation for computing high-frequency sound radiation from incoherent intensity boundary conditions
185
Development of an energy consumption monitoring procedure for machine tools
186
Development of an energy function reflecting the transfer conductances for direct stability analysis in power systems
187
Development of an energy management system for a naphtha reforming plant: A data mining approach
188
Development of an energy rating system for existing houses
189
Development of an energy selector system for laser-driven proton beam applications
190
Development of an energy selector system for laser-driven proton beam applications
191
Development of an energy-binned photon-counting detector for X-ray and gamma-ray imaging
192
Development of an energy-binned photon-counting detector for X-ray and gamma-ray imaging
193
Development of an engine control system using city gas and biogas fuel mixture
194
Development of an engine simulation program and its application to stratified charge SI engines
195
Development of an engine simulation program and its application to stratified charge SI engines
196
Development of an engineering model for nickel loading onto an iminodiacetic resin for resin-in-pulp applications: Part II — Evaluation of existing models and their extension into a hybrid correlation
197
Development of an engineering model for nickel loading onto an iminodiacetic resin for resin-in-pulp applications: Part III — Verification of hybrid correlation
198
Development of an engineering model for nickel loading onto an iminodiacetic resin for resin-in-pulp applications: Part I—Method development and discussion of rate limiting factors
199
Development of an engineering system for unburned carbon prediction
200
Development of an Enhanced Core Catcher for Improving In-Vessel Retention Margins
201
Development of an enhanced formulation for delivering sustained release of buprenorphine hydrochloride
202
Development of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte
203
Development of an enhanced MHD micromixer based on axial flow modulation
204
Development of an enrofloxacin immunosensor based on label-free electrochemical impedance spectroscopy
205
Development of an ensemble learning-based intelligent model for stock market forecasting
206
Development of an Ensemble Multi-stage Machine for Prediction of Breast Cancer Survivability
207
Development of an Ensemble Multi-stage Machine for Prediction of Breast Cancer Survivability
208
DEVELOPMENT OF AN ENTROPY- BASED FUZZY EUTROPHICATION INDEX FOR RESERVOIR WATER QUALITY EVALUATION
209
Development of an Environment and energy Geographical Information System (E-GIS) construction model to support environmentally friendly urban planning
210
Development of an Environmental Curriculum Model Based on Self- Management in High School: A Qualitative Study
211
Development of an environmental flows decision support system
212
Development of an environmental impact assessment evaluation model and its application: Taiwan case study
213
Development of an environmental virtual field laboratory
214
Development of an environmentally benign process for the production of fatty acid methyl esters
215
Development of an environmentally safe corrosion, scale, and microorganism inhibitor for open recirculating cooling systems
216
Development of an environmentally safe corrosion, scale, and microorganism inhibitor for open recirculating cooling systems
217
Development of an environmentally safe corrosion, scale, and microorganism inhibitor for open recirculating cooling systems
218
Development of an Environment-Friendly and Solvent-Free Synthetic Route for the Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones/Thiones Using La(NO3)3.6H2O as an Efficient Catalyst
219
Development of an environment-friendly microextraction method for the determination of aliphatic and aromatic aldehydes in water Original Research Article
220
Development of an Enzymatic Detergent Treatment Protocol That Significantly Reduces Protease Resistant Prion Protein Load and Infectivity from Prion-Contaminated Surgical-Steel Monofilaments
221
Development of an enzymatic flow-injection chemiluminescence system for determining inorganic pyrophosphate ion
222
Development of an enzymatic flow-injection chemiluminescence system for determining inorganic pyrophosphate ion Original Research Article
223
Development of an enzymatic microreactor based on microencapsulated laccase with off-line capillary electrophoresis for measurement of oxidation reactions
224
Development of an enzyme immuno assay for the determination of porcine haptoglobin in various body fluids: testing the significance of meat juice measurements for quality monitoring programs
225
Development of an enzyme immuno assay for the determination of porcine haptoglobin in various body fluids: testing the significance of meat juice measurements for quality monitoring programs
226
Development of an enzyme immunoassay for linoleic acid diols in urine Original Research Article
227
Development of an enzyme immunoassay for the detection of plant growth regulator inabenfide in rice Original Research Article
228
Development of an enzyme linked receptor assay (ELRA) for estrogens and xenoestrogens Original Research Article
229
Development of an enzymeless biosensor for the determination of phenolic compounds Original Research Article
230
Development of an enzymeless electroanalytical method for the indirect detection of creatinine in urine samples
231
Development of an enzyme-linked immunoassay for carbamylated plasma albumin
232
Development of an enzyme-linked immunoassay for the detection of gentamicin in swine tissues
233
Development of an enzyme-linked immunosorbent assay (ELISA) for antitumor agent MKT 077
234
Development of an enzyme-linked immunosorbent assay (ELISA) for the herbicide trifluralin Original Research Article
235
Development of an enzyme-linked immunosorbent assay (ELISA) using highly-specific monoclonal antibodies against plumbagin Original Research Article
236
Development of an enzyme-linked immunosorbent assay (ELISA)-like fluorescence assay to investigate the interactions of glycosaminoglycans to cells Original Research Article
237
Development of an enzyme-linked immunosorbent assay based on anti-puerarin monoclonal antibody and its applications
238
Development of an enzyme-linked immunosorbent assay for 2,3-dinor-6-keto-prostagland in F1α in urine using a monoclonal antibody
239
Development of an enzyme-linked immunosorbent assay for 2,3-dinor-6-keto-prostagland in F1α in urine using a monoclonal antibody
240
Development of an enzyme-linked immunosorbent assay for benalaxyl and its application to the analysis of water and wine Original Research Article
241
Development of an Enzyme-Linked Immunosorbent Assay for Detection of the Gregarious Hymenopteran Parasitoid Muscidifurax raptorellus in House Fly Pupae
242
Development of an enzyme-linked immunosorbent assay for diniconazole in agricultural samples
243
Development of an enzyme-linked immunosorbent assay for equine neutrophil elastase measurement in blood: Preliminary application to colic cases
244
Development of an enzyme-linked immunosorbent assay for equine neutrophil elastase measurement in blood: Preliminary application to colic cases
245
Development of an enzyme-linked immunosorbent assay for pentachlorophenol Original Research Article
246
Development of an enzyme-linked immunosorbent assay for the detection of nitrofurantoin metabolite, 1-amino-hydantoin, in animal tissues
247
Development of an enzyme-linked immunosorbent assay for toosendanin Original Research Article
248
Development of an enzyme-linked immunosorbent assay, using a monoclonal antibody against (alpha)2-macroglobulin, for the diagnosis of systemic lupus erythematosus
249
Development of an enzyme-linked immunosorbent assay, using a monoclonal antibody against α2-macroglobulin, for the diagnosis of systemic lupus erythematosus
250
Development of an enzyme-linked immunosorbent assay, using a monoclonal antibody against α2-macroglobulin, for the diagnosis of systemic lupus erythematosus
251
Development of an EOS based on lattice cluster theory for pure components
252
Development of an epoxy-based monolith used for the affinity capturing of Eschericha coli bacteria
253
Development of an equation for calculating vertebral shear failure tolerance without destructive mechanical testing using iterative linear regression
254
Development of an equation of state for the square-well chain molecules of variable well width based on a modified coordination number model
255
DEVELOPMENT OF AN EQUIVALENCE RELATION AND A NEW DISADVANTAGE FACTOR APPLICABLE TO BOTH FAST AND THERMAL ENERGY REGIONS
256
Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current
257
Development of an equivalent force method and an application in simulating the radiated noise from an operating diesel engine
258
Development of an equivalent force method and an application in simulating the radiated noise from an operating diesel engine
259
Development of an equivalent-circuit model for the lithium/iodine battery
260
Development of an ergonomic evaluation facility for Indian tractors
261
Development of an ergonomics guideline for the furniture manufacturing industry
262
Development of an error-minimizing adaptive grid method Original Research Article
263
Development of an estimation model for the evaluation of the energy requirement of dilute acid pretreatments of biomass
264
Development of an estuarine multi-metric fish index and its application to Irish transitional waters
265
Development of an estuarine quality index based on key physical and biogeochemical features
266
Development of an ethanol model using social insects: V. Honeybee foraging decisions under the influence of alcohol
267
Development of an evapotranspiration index from Aqua/MODIS for monitoring surface moisture status
268
Development of an event-specific assay for the qualitative and quantitative detection of the genetically modified flax CDC Triffid (FP967)
269
Development of an Evidence-Based Policy for the Prevention of Ventilator Associated Pneumonia by Building on Existing Systems
270
Development of an Evidence-Based Progressive Web App to Promote Exercise Therapy and Telemonitoring for Individuals with Patello-Femoral Pain Syndrome: A Usability Study
271
Development of an evolutionary fuzzy expert system for estimating future behavior of stock price
272
Development of an ex vivo model of endovenous laser ablation of the great saphenous vein in a pilot study
273
Development of an exact dynamic stiffness matrix for free vibration analysis of a twisted Timoshenko beam
274
Development of an exergy-electrical analogy for visualizing and modeling building integrated energy systems
275
Development of an experimental facility for a liquid breeder in Korea
276
Development of an experimental facility for measuring pressure waves generated by high-speed trains
277
Development of an experimental glass ionomer cement containing niobium and fluoride
278
Development of an experimental loop heat pipe for application in future space missions
279
Development of an experimental procedure for energy evaluation of forest communities by calorimetry and thermal analysis
280
Development of an experimental prototype of an integrated thermal management controller for internal-combustion-engine-based cogeneration systems
281
Development of an experimental system for greywater reuse Original Research Article
282
Development of an experimental tool for measuring electrical properties of materials from liquid nitrogen temperature up to 1000°C
283
Development of an experimentally validated abrasive-grain cutting model using a hybrid Euler–Lagrange finite element formulation
284
Development of an expert multitask gadget controlled by voluntary eye movements
285
Development of an expert selection system to choose ideal cities for medical service ventures
286
Development of an expert system for evaluation of the strength of matrix shape memory composites
287
Development of an expert system for fault diagnosis in scooter engine platform using fuzzy-logic inference
288
Development of an expert system for tackling the publicʹs perception to climate-change impacts on petroleum industry
289
Development of an expert system for the determination of injection moulding parameters of thermoplastic materials: EX-PIMM
290
Development of an expert system for the evaluation of conventional and innovative technologies in the intermodal transport area
291
Development of an expert system for the process design of axisymmetric hot steel forging
292
Development of an expert system for turning and rotating tool selection in a dynamic environment
293
Development of an expert system for underbalanced drilling using fuzzy logic
294
Development of an expert system rulebase for the prospective identification of photoallergens
295
Development of an expert system to aid engineers in the selection of design for environment methods and tools
296
Development of an expert system to select materials for the main structure of a transfer crane designed for disabled people
297
Development of an expert tool using Principal Component Analysis (PCA) approach: for identifying human diseases , its severity
298
Development of an explicit algebraic turbulence model for buoyant flows – Part 1: DNS analysis
299
Development of an explicit Eulerian method for treating particle-laden turbulent flow in dust collectors
300
Development of an Extended Corresponding States Principle Method for Volumetric Property Predictions Based on a Lee–Kesler Reference Fluid
301
Development of an extended thermo-hydraulic simulation tool for fusion magnet design study – Application to the initial versions of JT-60SA TF coils layout Original Research Article
302
Development of an extensive database of mechanical and physical properties for reduced-activation martensitic steel F82H
303
Development of an external-type microinjection molding module for thermoplastic polymer
304
Development of an extraction and cleanup procedure for a liquid chromatographic–mass spectrometric method to analyze octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine in eggs
305
Development of an Extraction Method Based on a Zirconium-based Metal Organic Framework for the Detection and Determination of some Pesticides in Juice Samples Using GC-FID
306
Development of an extraction method for the determination of prostaglandins in biological tissue samples using liquid chromatography–tandem mass spectrometry: Application to gonads of Atlantic cod (Gadus morhua) Original Research Article
307
Development of an extraction method for the determination of zearalenone in corn using less organic solvents
308
Development of an extraction method for the determination of zearalenone in corn using less organic solvents
309
Development of an extreme ultraviolet imaging spectrometer for the BepiColombo mission Original Research Article
310
Development of an extremely flexible automatic analyzer with integrated biosensors for on-line control of fermentation processes
311
Development of an extremely thin grinding-tool for grinding microgrooves in optical glass
312
Development of an extrusion system for Bori and force characteristics of its batter during extrusion Original Research Article
313
Development of an extrusion system for producing fine-celled HDPE/wood-fiber composite foams using CO2 as a blowing agent
314
Development of an HAPD with 144 channels for the aerogel RICH of the Belle upgrade
315
Development of an HAPD with 144 channels for the aerogel RICH of the Belle upgrade
316
Development of an high resolution neutron spectroscopy system using a diamond detector and a remote digital acquisition methodology
317
Development of an HPLC fluorescence method for determination of boldine in plasma, bile and urine of rats and identification of its major metabolites by LC–MS/MS
318
Development of an HPLC method for monitoring of Photofrin II therapy
319
Development of an HPLC method for the determination of doripenem in human and mouse serum
320
Development of an HPLC method for the determination of mexiletine in human plasma and urine by solid-phase extraction
321
Development of an HPLC method for the determination of nifedipine in human plasma by solid-phase extraction
322
Development of an HPLC method with electrochemical detection of femtomoles of 8-oxo-7,8-dihydroguanine and 8-oxo-7,8-dihydro-2′-deoxyguanosine in the presence of uric acid
323
Development of an HPLC–MS procedure for the quantification of N-acetyl-S-(n-propyl)-l-cysteine, the major urinary metabolite of 1-bromopropane in human urine
324
Development of an HPLC–UV method for the simultaneous determination of tetracyclines in muscle and liver of porcine, chicken and bovine with accelerated solvent extraction
325
Development of an HPLC–UV/Vis method for the determination of dyes in a gasoline sample employing different pre-treatments
326
Development of an HPV Educational Protocol for Adolescents
327
Development of an HRTEM image analysis method to quantify carbon nanostructure
328
Development of an HS-SPME-GC method to determine the methyl anthranilate in Citrus honeys
329
Development of an ice container system for temporary space cooling
330
Development of an ICP-MS immunoassay for the detection of anti-erythropoietin antibodies
331
Development of an Idiotypic Network in Shape Space
332
Development of an IgG/IgY Sandwich-ELISA for the Detection of Cholera Toxin Subunit B
333
Development of an IL-6 Inhibitor Based on the Functional Analysis of Murine IL-6Rα1 Original Research Article
334
Development of an ILP model for optimal site selection and sizing of electric vehicle charging station using GA: a case study of Tehran
335
Development of an image analysis procedure for identifying protozoa and metazoa typical of activated sludge system
336
Development of an image based integrated method for determining and mapping aerosol optical thickness (AOT) over urban areas using the darkest pixel atmospheric correction method, RT equation and GIS: A case study of the Limassol area in Cyprus
337
Development of an image recognition system for RFX first wall maintenance
338
Development of an image-processing technique for soil tilth sensing
339
Development of an image-processing technique for soil tilth sensing
340
Development of an imaging microstrip gas chamber with a 5 cm × 5 cm area based on multi-chip module technology
341
Development of an imaging microstrip gas chamber with a 5 cm × 5 cm area based on multi-chip module technology
342
Development of an Imaging Time-of-Propagation (iTOP) prototype detector
343
Development of an Imaging Time-of-Propagation (iTOP) prototype detector
344
Development of an immersed boundary-phase field-lattice Boltzmann method for Neumann boundary condition to study contact line dynamics
345
Development of an immobilization and detection method of Enterobacter sakazakii from powdered infant formula Original Research Article
346
Development of an immobilization method by encapsulating inorganic metal salts forming hollow microcapsules
347
Development of an immobilized brain glutamine synthetase liquid chromatographic stationary phase for on-line biochemical studies
348
Development of an immobilized brain glutamine synthetase liquid chromatographic stationary phase for on-line biochemical studies
349
Development of an immobilized P-glycoprotein stationary phase for on-line liquid chromatographic determination of drug-binding affinities
350
Development of an immobilized-antigen immunofluorescence glass slide system that exploits fluorescent silica nanoparticles
351
Development of an immunoaffinity chromatography column for selective extraction of a new agonist phenylethylamine A from feed, meat and liver samples
352
Development of an immunoaffinity column method using broad-specificity monoclonal antibodies for simultaneous extraction and cleanup of quinolone and sulfonamide antibiotics in animal muscle tissues
353
Development of an Immunoaffinity Method for Purification of Streptokinase
354
Development of an immunoaffinity-based solid-phase extraction for diazinon
355
Development of an immunoaffinity-based solid-phase extraction for diazinon Original Research Article
356
Development of an immunoassay and a sol–gel-based immunoaffinity cleanup method for coplanar polychlorinated biphenyls from soil and sediment samples Original Research Article
357
Development of an immunoassay based on impedance measurements utilizing an antibody–nanosilver probe, silver enhancement, and electro-microchip
358
Development of an immunoassay for a quaternary ammonium compound, benzyldimethyldodecylammonium chloride
359
Development of an immunoassay for diagnosis of exposure to toxic organophosphorus compounds
360
Development of an immunoassay for larch arabinogalactan and its use in the detection of larch arabinogalactan in rat blood
361
Development of an immunoassay for rapid screening of vardenafil and its potential analogues in herbal products based on a group specific monoclonal antibody Original Research Article
362
Development of an immunoassay for terbutryn: Study of the influence of the immunization protocol
363
Development of an immunoassay for the measurement of skeletal troponin I using isoform-specific monoclonal antibodies
364
Development of an immunoassay to measure the humoral immune response of hybrid striped bass Morone chrysops×M. saxatilis
365
Development of an immunoassay to measure the humoral immune response of hybrid striped bass Morone chrysops×M. saxatilis
366
Development of an immunoblotting assay for serodiagnosis of Burkholderia mallei infection: the wholecell proteomebased paradigm
367
Development of an immunochromatographic assay for detection of aflatoxin B1 in foods
368
Development of an immunochromatographic assay for rapid and quantitative detection of clenbuterol in swine urine
369
Development of an immunochromatographic assay for the rapid detection of bromoxynil in water
370
Development of an immunochromatographic method to determine β-lactoglobulin at trace levels Original Research Article
371
Development of an immunochromatographic strip and its application in the simultaneous determination of Hg(II), Cd(II) and Pb(II)
372
Development of an immunochromatographic strip test for the rapid detection of deoxynivalenol in wheat and maize
373
Development of an immunochromatographic strip test for the rapid simultaneous detection of deoxynivalenol and zearalenone in wheat and maize
374
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
375
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
376
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
377
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
378
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
379
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
380
Development of an immunoenzymatic assay for the detection of human antibodies against Trypanosoma cruzi calreticulin, an immunodominant antigen
381
Development of an immunoenzyme test system for diagnosis if rabies
382
Development of an immunofluorescence technique for detecting Pfiesteria piscicida
383
Development of an immunofluorometric assay for human kallikrein 15 (KLK15) and identification of KLK15 in tissues and biological fluids
384
Development of an immuno-immobilized androgen receptor assay (IRA) and its application for the characterization of the receptor binding affinity of different pesticides
385
Development of an immunomagnetic bead-based time-resolved fluorescence immunoassay for rapid determination of levels of carcinoembryonic antigen in human serum Original Research Article
386
Development of an immunomagnetic separation method for efficient enrichment of Escherichia coli O157:H7
387
Development of an immunosensor based on the measurement of fluorescence
388
Development of an immunosensor for human ferritin, a nonspecific tumor marker, based on a quartz crystal microbalance Original Research Article
389
Development of an immunosensor for the detection of testosterone in bovine urine Original Research Article
390
Development of an immunosensor for the determination of allergy antibody (IgE) in blood samples
391
Development of an immunosensor for the determination of allergy antibody (IgE) in blood samples Original Research Article
392
Development of an immunosensor for the determination of rabbit IgG using streptavidin modified screen-printed carbon electrodes
393
Development of an impedance-based sensor for detection of catalyst coking in fuel reforming systems
394
Development of an impedimetric immunosensor based on electropolymerized polytyramine films for the direct detection of Salmonella typhimurium in pure cultures of type strains and inoculated real samples Original Research Article
395
Development of an impedimetric immunosensor for the determination of 3-amino-2-oxazolidone residue in food samples Original Research Article
396
Development of an Implantable Ventricular Assist System
397
Development of an implementation plan for a geographic information system: case of Lincoln County
398
Development of an implicit air pollution model for regions of variable topography
399
Development of an implicit least squares optimisation scheme for the determination of Kihara potential parameters using gas hydrate equilibrium data
400
DEVELOPMENT OF AN IMPLICIT NUMERICAL MODEL FOR CALCULATION OF SUB-AND SUPER-CRITICAL FLOWS
401
Development of an imprinted polymeric sensor with dual sensing property for trace level estimation of zinc and arginine
402
Development of an improved adhesive test method for composite assembly design
403
Development of an improved anaerobic filter for municipal wastewater treatment
404
Development of an improved analytical method for the determination of carcinogenic polycyclic aromatic hydrocarbons in transformer oil
405
Development of an Improved Chemical Model for the Estimation of CaSO4 Solubilities in the HCl-CaCl2-H2O System up to 100 °C
406
Development of an improved continuous hydrogenation process for the production of 1,3-propanediol using titania supported ruthenium catalysts Original Research Article
407
Development of an improved dry and wet deposition collector and the atmospheric deposition of PAHs onto Ulsan Bay, Korea
408
Development of an improved dynamic model of a Stirling engine and a performance analysis of a cogeneration plant
409
Development of an improved falling ball viscometer for high-pressure measurements with supercritical CO2
410
Development of an Improved Gas-Kinetic BGK Scheme for Inviscid and Viscous Flows
411
Development of an improved ground-based prototype of space plant-growing facility Original Research Article
412
Development of an improved heated interface for coupling solid-phase microextraction to high-performance liquid chromatography
413
Development of an improved heating system for industrial tunnel baking ovens Original Research Article
414
Development of an improved high resolution mass spectrometry based multi-residue method for veterinary drugs in various food matrices Original Research Article
415
Development of an improved LPCE column for the TLK facility with the help of the channeling stage model
416
Development of an improved method for the determination of polycyclic aromatic hydrocarbons in mainstream tobacco smoke
417
Development of an improved method for trace analysis of chloramphenicol using molecularly imprinted polymers
418
Development of an improved method of cultivation to obtain high biomass of the red alga Gelidiella acerosa (Gelidiales, Rhodophyta) in the open sea
419
Development of an improved method to extract pesticide residues in foods using acetontrile with magnesium sulfate and chloroform
420
Development of an improved method to perform single particle analysis by TIMS for nuclear safeguards Original Research Article
421
Development of an improved on-line chromatographic monitor with new methods for environmental and process control
422
Development of an improved optical transmission technique for black carbon (BC) analysis
423
Development of an improved PCR–ICT hybrid assay for direct detection of Legionellae and Legionella pneumophila from cooling tower water specimens
424
Development of an improved physical modelling of a forest area in a wind tunnel
425
Development of an improved positron emission particle tracking system
426
Development of an improved positron emission particle tracking system
427
Development of an improved procedure for extraction and quantitation of safranal in stigmas of Crocus sativus L. using high performance liquid chromatography
428
Development of an improved RNA interference vector system for Agrobacterium-mediated plant transformation
429
Development of an improved spatial reconstruction technique for the HLL method and its applications
430
Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite
431
Development of an improved switched reluctance motor drive using a soft-switching converter
432
Development of an improved synthetic sludge: a possible surrogate for studying activated sludge dewatering characteristics
433
Development of an improved target for [18F]F2 production
434
Development of an improved tube galvanizing process by prior metallic coating
435
Development of an improved voltage and current measurement system for studying spark characteristics with application to electrodischarge machining
436
Development of an in situ ITER dust diagnostic based on extinction spectrometry: Dedicated light scattering models
437
Development of an in situ neutron-scattering facility for research and education in the mechanical behavior of materials
438
Development of an in situ rheological method to characterize fatty acid crystallization in complex fluids
439
Development of an in situ root caries model B. In situ investigations
440
Development of an in situ root caries model. A. In vitro investigations
441
Development of an in situ soil binding agent
442
Development of an in vitro Endotoxin Test for Monoolein–Water Liquid Crystalline Gel for Use as an Implant
443
Development of an in vitro incubation procedure for screening of CYP2D6 intrinsic clearance
444
Development of an in vitro index to characterize fertilizing capacity of boar ejaculates
445
Development of an in vitro method for determination of methane production kinetics using a fully automated in vitro gas system—A modelling approach
446
Development of an in vitro method to assess the availability of soil-associated radionuclides for uptake by ruminants
447
Development of an in Vitro Model for Investigating the Formation of the Nuclear Ah Receptor Complex in Mouse Hepa 1c1c7 Cells
448
Development of an in vitro model of fish skin and gill
449
Development of an in vitro model system for studying the interaction of Equus caballus IgE with its high-affinity receptor FcɛRI
450
Development of an in vitro model system for studying the interaction of Equus caballus IgE with its high-affinity receptor FcɛRI
451
Development of an in vivo computer for the SAT problem
452
Development of an in vivo method for determining material properties of passive myocardium
453
Development of an inconel self powered neutron detector for in-core reactor monitoring
454
Development of an inconel self powered neutron detector for in-core reactor monitoring
455
Development of an Increased Signal Intensity in Fat-Suppressed Images into a Navicular Cyst of an 11-Year-Old Warmblood Horse Evidenced by Six Follow-Up Standing Low-Field Magnetic Resonance Imaging Examinations Over 2 Years
456
Development of an Index of Aquifer Water Quality within GIS Environment
457
Development of an Index of Balsam Fir Vigor by Foliar Spectral Reflectance
458
Development of an indicator for the emission control of diesel passenger cars
459
Development of an Indigenous Depression Scale for Adolescent Schoolgirls
460
Development of an Indigenous Microwave Absorber
461
Development of an Indigenous Obsessive Compulsive Disorder Scale for Pakistan
462
Development of an indirect competitive ELISA for detection of danofloxacin residue in milk
463
Development of an indirect competitive ELISA for the determination of papaverine
464
Development of an indirect competitive immunoassay for parathion in vegetables
465
Development of an indirect competitive immunoassay for walnut protein component in food
466
Development of an indirect ELISA for bovine mastitis using Sip protein of Streptococcus agalactiae
467
Development of an Indirect ELISA Using Different Fragments of Recombinant Ncgra7 for Detection of Neospora caninum Infection in Cattle and Water Buffalo.
468
Development of an Indirect Enzymelinked Immunosorbent Assay to Detect Antibodies against Serotype A2013 of Foot and Mouth Disease Virus in Cattle
469
Development of an Indirect Fluorescent Antibody (IFA) Assay for the Detection of Leishmania RNA Virus 2 (LRV2) in Leishmania Parasites
470
Development of an Indirect Forced Flow Greenhouse Solar Dryer for Barberry Drying
471
Development of an Indium bump bond process for silicon pixel detectors at PSI
472
Development of an Indium bump bond process for silicon pixel detectors at PSI
473
Development of an individual exposure model for application to the Southern California childrenʹs health study
474
Development of an individual tree-based mechanical model to predict wind damage within forest stands
475
Development of an individual-based model to evaluate elk (Cervus elaphus nelsoni) movement and distribution patterns following the Cerro Grande Fire in north central New Mexico, USA
476
Development of an individual-based model to evaluate elk (Cervus elaphus nelsoni) movement and distribution patterns following the Cerro Grande Fire in north central New Mexico, USA
477
Development of an industrial characterisation method for naphtha reforming bimetallic Pt-Sn/Al2O3 catalysts through n-heptane reforming test reactions
478
Development of an industrial ecology toolbox for the introduction of industrial ecology in enterprises—I
479
Development of an industrial ethanol-producing yeast strain for efficient utilization of cellobiose
480
Development of an industrial medium and a novel fed-batch strategy for high-level expression of recombinant β-mananase by Pichia pastoris
481
Development of an industrial medium for economical 2,3-butanediol production through co-fermentation of glucose and xylose by Klebsiella oxytoca
482
Development of an industrial tool to make passivation layers for UV sensors improvement
483
Development of an industrialised DLC duplex treatment process
484
Development of an Inertial Measurement Unit for Unmanned Aerial Vehicles
485
Development of an inexact optimization model for coupled coal and power management in North China Development of an inexact optimization model for coupled coal and power management in North China
486
Development of an inexpensive and sensitive method for the determination of low quantity of arsenic species in water samples by CPE–FAAS
487
Development of an influenza vaccination protocol for use in an intervention trial to measure the effect of inulin-type fructans on immune function in humans
488
Development of an Information and Database System for the IERS: Status and outlook
489
Development of an information engineering and management program
490
Development of an information system on inherent bioactive compounds in food plants
491
Development of an Informed Consent Form for Intrauterine Device (IUD) Insertion Using the Delphi Method
492
Development of an ingenious method for determination of Dynabeads protein A based on a giant magnetoimpedance sensor
493
Development of an in-house fast real-time PCR method for detection of fish allergen in foods and comparison with a commercial kit
494
development of an in-house indirect elisa test as a diagnostic tool for bovine leptospirosis
495
Development of an InHouse TaqMan Real Time RTPCR Assay to Quantify Hepatitis C Virus RNA in Serum and Peripheral Blood Mononuclear Cells in Patients With Chronic Hepatitis C Virus Infection
496
Development of an injectable grout for concrete repair and strengthening
497
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 1. Encapsulation of marrow stromal osteoblasts in surface crosslinked gelatin microparticles
498
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 2. Viability of encapsulated marrow stromal osteoblasts cultured on crosslinking poly(propylene fumarate)
499
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 3. Proliferation and differentiation of encapsulated marrow stromal osteoblasts cultured on crosslinking poly(propylene fumarate)
500
Development of an innovative 3-stage steady-bed gasifier for municipal solid waste and biomass
501
Development of an innovative and “green” stir bar sorptive extraction–thermal desorption–gas chromatography–tandem mass spectrometry method for quantification of polycyclic aromatic hydrocarbons in marine biota
502
Development of an innovative interlocking load bearing hollow block system in Malaysia
503
Development of an innovative soil remediation: “Cyclodextrin-enhanced combined technology”
504
Development of an innovative tool to assess hospital learning environments
505
Development of an innovative vertical submerged membrane bioreactor (VSMBR) for simultaneous removal of organic matter and nutrients
506
Development of an innovative wheel–rail contact model for the analysis of degraded adhesion in railway systems
507
Development of an inorganic cations retention model in ion chromatography by means of artificial neural networks with different two-phase training algorithms
508
Development of an inshore fringing coral reef using textural, compositional and stratigraphic data from Magnetic Island, Great Barrier Reef, Australia
509
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique — Optimization of process parameters
510
Development of an instrument for measuring cognitive conflict in secondary-level science classes
511
Development of an instrument for measuring inter-particle forces
512
Development of an instrument for simultaneous detection of positive and negative scanning ion images
513
Development of an Instrument for the Online Evaluation of Orthodontic-Treated Cases: A Pilot Study
514
Development of an instrument for time–activity curve measurements during PET imaging of rodents
515
Development of an instrument for time–activity curve measurements during PET imaging of rodents
516
Development of an instrument to measure cardiac illness dependency
517
Development of an instrument to measure caring behaviors in nursing students in Taiwan
518
Development of an instrument to measure classroom community
519
Development of an Instrument to Measure Parents’ Preferences and Goals for the Treatment of Attention Deficit–Hyperactivity Disorder
520
Development of an instrument to measure professional attitudes in nursing students in Turkey
521
Development of an Instrument to Measure Self-Efficacy for Social Participation of People With Mental Illness
522
Development of an instrument to measure the responses and management of Chinese primary caregivers in caring of children with minor upper respiratory disorders
523
Development of an instrumented blade system for mapping soil mechanical resistance represented as a second-order polynomial
524
Development of an instrumented indentation device for further characterization of irradiated steels at high temperature
525
Development of an instrumented pole test for use as a gait laboratory quality check
526
Development of an integrally skinned ultrafiltration membrane for wastewater treatment: effect of different formulations of PSf/NMP/PVP on flux and rejection Original Research Article
527
Development of an integrated air conditioner with thermosyphon and the application in mobile phone base station
528
Development of an Integrated Air Quality Monitoring System for Temperature, Humidity, CO, and PM10 Measurement
529
Development of an integrated and open-architecture precision motion control system
530
Development of an integrated approach for the stability testing of flavonoids and ascorbic acid in powders
531
Development of an integrated CAD tool for switching power supply design with EMC performance evaluation
532
Development of an integrated CAD/CAE/CAM system on taper-tipped thread-rolling die-plates
533
Development of an integrated CAD–FEA process for below-knee prosthetic sockets
534
Development of an integrated chromatographic system for on-line digestion and characterization of phosphorylated proteins
535
Development of an integrated CMOS DNA detection biochip
536
Development of an integrated coastal management plan for the Gulf of San Miguel and Darien Province, Panama: Lessons from the experience
537
Development of an integrated computer-aided process planning system for press working products
538
Development of an integrated data storage and retrieval system for TEC
539
Development of an integrated data-acquisition system for renewable energy sources systems monitoring
540
Development of an integrated decision-support model for density management within jack pine stand-types
541
Development of an integrated decision-support model for density management within jack pine stand-types
542
Development of an integrated digital health intervention to promote engagement in and adhe
543
Development of an integrated direct-contacting optical-fiber microchip with light-emitting diode-induced fluorescence detection
544
Development of an integrated dynamic thermal bridging assessment environment
545
Development of an integrated economic and ecological framework for ecosystem-based fisheries management in New England
546
Development of an integrated electrochemical biosensor for sucrose and its implementation in a continuous flow system for the simultaneous monitoring of sucrose, fructose and glucose
547
Development of an integrated fission product release and transport code for spatially resolved full-core calculations of V/HTRs
548
Development of an integrated flow injection system for the electro-oxidative leaching of uranium from geological samples and its spectrophotometric determination with Arsenazo III Original Research Article
549
Development of an Integrated Framework for Facility Relocation Problem: A Case Study
550
Development of an Integrated Fuzzy-Logic-Based Missile Guidance Law Against High Speed Target
551
Development of an integrated geographical information system prototype for coastal habitat monitoring
552
Development of an integrated Grey–fuzzy-based electricity management system for enterprises
553
Development of an integrated information model for computer integrated manufacturing
554
Development of an integrated information resource base for 4D/VR construction processes simulation
555
Development of an integrated knowledge-based system for mold-base design
556
Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects
557
Development of an integrated method for fully characterizing multiphase inclusions and its application to calcium-treated steels
558
Development of an integrated methodology for the energy needs of a major urban city: The case study of Athens, Greece
559
Development of an integrated methodology in support of remaining life assessment of Co-60 based gamma irradiation facilities
560
Development of an integrated microfluidic device for evaluating of in vivo chemo-sensing of intact Caenorhabditis elegans
561
Development of an integrated model for airflow in building spaces
562
Development of an integrated model for assessing the impact of diffuse and point source pollution on coastal waters
563
Development of an integrated model for heat transfer and dynamic growth of Clostridium perfringens during the cooling of cooked boneless ham
564
Development of an Integrated Model for Maintenance Planning and Statistical Process Control
565
Development of an integrated model of personality, personality disorders and severe axis I disorders, with special reference to major affective disorders
566
Development of an integrated neural network system for prediction of process parameters in metal injection moulding
567
Development of an integrated NSOM probe
568
Development of an integrated NSOM probe
569
Development of an integrated onsite earthquake early warning system and test deployment in Zhaotong, China
570
Development of an Integrated Performance Measurement (PM) Model for Pharmaceutical Industry
571
Development of an integrated pretreatment fractionation process for fermentable sugars and lignin: Application to almond (Prunus dulcis) shell
572
Development of an integrated reduced fuel oxidation and soot precursor formation mechanism for CFD simulations of diesel combustion
573
Development of an integrated reflow soldering control system using incremental hybrid process knowledge
574
Development of an integrated response generator for Si/CdTe semiconductor Compton cameras
575
Development of an integrated response generator for Si/CdTe semiconductor Compton cameras
576
Development of an integrated simulation model for treatment and distribution of reclaimed water Original Research Article
577
Development of an integrated single-fiber SERS sensor
578
Development of an integrated solar home system
579
Development of an Integrated Structure of CHP and Heavy Hydrocarbons Liquids Using Fischer-Tropsch Synthesis
580
Development of An Integrated Surface and Sub-Surface Simulation Model in A Single Simulation Platform
581
Development of an integrated water resources management plan for the Lake Manyara sub-basin, Northern Tanzania
582
Development of an Integrated Watershed Management strategy for Resource Conservation in Balochistan Province of Pakistan Original Research Article
583
Development of an integrated wireless sensor network micro-environmental monitoring system
584
Development of an intelligent decision support system for air pollution control at coal-fired power plants
585
Development of an Intelligent Energy Management Network for Building Automation
586
Development of an intelligent indoor environment and energy management system for greenhouses
587
Development of an Intelligent Polymerized Crystalline Colloidal Array Colorimetric Reagent
588
Development of an intelligent quality management system using fuzzy association rules
589
Development of an intelligent system for ultrasonic flaw classification in weldments Original Research Article
590
Development of an Intelligent System to Synthesize Petrophysical Well Logs
591
Development of an intelligent task management system in a manufacturing information network
592
Development of an intelligent technique for traffic network incident detection
593
Development of an interactive computer-based learning strategy to assist in teaching water quality modelling
594
Development of an interactive rule-based system for bulk power system restoration
595
Development of an interfacial thermal lens technique: monitoring the dissolving process of amphiphilic molecules at the hexane–water interface
596
Development of an interference-free biosensor for glucose-6-phosphate using a bienzyme-based Clark-type electrode
597
Development of an interference-free biosensor for l-glutamate using a bienzyme salicylate hydroxylase/l-glutamate dehydrogenase system
598
Development of an interference-free chemiluminescence method for monitoring acetylcholine and choline based on immobilized enzymes Original Research Article
599
Development of an interferent free amperometric biosensor for determination of l-lysine in food Original Research Article
600
Development of an Internal Monostandard Instrumental Neutron Activation Analysis Method Based on In Situ Detection Efficiency for Analysis of Large and Nonstandard Geometry Samples
601
Development of an international standard for shear testing
602
Development of an internet atlas of Switzerland
603
Development of an interoperability model for different construction drawing standards based on ISO 10303 STEP
604
Development of an inter-process linkage technology for fluoro-nitric acid washing-agent and its LCA evaluation
605
Development of an interrupting chamber for 1000 kV high-speed grounding switches
606
Development of an Interview for Anxiety-Relevant Interpersonal Styles: Preliminary Support for Convergent and Discriminant Validity
607
Development of an intra-cavity gas detection system based on L-band erbium-doped fiber ring laser
608
Development of an intra-lamellar microdialysis method for laminitis investigations in horses
609
Development of an intrument to ae viion-related quality of life in young children
610
Development of an intuitive user interface for a hydraulic backhoe
611
Development of an invasive species distribution model with fine-resolution remote sensing
612
Development of an Inventory Control Model for Reusable Items: Economic Quantities of Order and Recovery
613
Development of an inverse diffusion partial oxidation flame and model burner contributing to the development of 3rd generation coal gasifiers
614
Development of an inverse finite element method with an initial guess of linear unfolding
615
Development of an investment decision tool for biogas production from agricultural waste
616
Development of an in-vitro mouth model to quantify salt release from gels
617
Development of an in-vivo method of wrist joint motion analysis
618
Development of an ion chromatographic gradient retention model from isocratic elution experiments
619
Development of an Ion Chromatographic Method for Determination of Inorganic Anions in Surface Water by Using Computer-Assisted Gradient Optimization Methodology
620
Development of an ion exchange system for plating wastewater treatment Original Research Article
621
Development of an ion-beam sputtering system for depositing thin films and multilayers of alloys and compounds
622
Development of an ion-channel sensor for heparin detection Original Research Article
623
Development of an ionic liquid based dispersive liquid–liquid microextraction method for the analysis of polycyclic aromatic hydrocarbons in water samples
624
Development of an ionic liquid-based dispersive liquid–liquid microextraction method for the determination of nifurtimox and benznidazole in human plasma
625
Development of an ionic liquid-based microwave-assisted method for simultaneous extraction and distillation for determination of proanthocyanidins and essential oil in Cortex cinnamomi
626
Development of an ionic liquid-based ultrasonic-assisted liquid–liquid microextraction method for sensitive determination of biogenic amines: Application to the analysis of octopamine, tyramine and phenethylamine in beer samples
627
Development of an Iranian CPB Based Risk Stratification Score Model, an Iranian Risk Stratification Model
628
Development of an Iranian Sexual Satisfaction Model: A Qualitative Research
629
Development of an iridium–tantalum modified aluminide coating as a diffusion barrier on nickel-base single crystal superalloy TMS-75
630
Development of an iron oxide-impregnated paper strip technique for the determination of bioavailable phosphorus in runoff
631
Development of an irrigation vulnerability assessment model in agricultural reservoirs utilizing probability theory and reliability analysis
632
Development of an isotope dilution mass spectrometry assay for HbA1c based on enzyme-cleaved peptide analysis
633
Development of an isotope labeling ultra-high performance liquid chromatography mass spectrometric method for quantification of acylglycines in human urine Original Research Article
634
Development of an isotope-coded activity-based probe for the quantitative profiling of cysteine proteases
635
Development of an ITER relevant inspection robot
636
Development of an LC-ESI–MS/MS method for the determination of histamine: Application to the quantitative measurement of histamine degranulation by KU812 cells
637
Development of an LC–MS method for determination of three active constituents of Shuang-huang-lian injection in rat plasma and its application to the drug interaction study of Shuang-huang-lian freeze-dried powder combined with levofloxacin injection
638
Development of an LC–MS/MS assay to determine plasma pharmacokinetics of the radioprotectant octadecyl thiophosphate (OTP) in monkeys
639
Development of an LC–MS/MS method for the quantitation of 55 compounds prescribed in combined cardiovascular therapy
640
Development of an LEFM dynamic crack criterion for correlated size and rate effects in concrete beams
641
Development of an LENA instrument for planetary missions by numerical simulations
642
Development of an l-glutamate biosensor using the coimmobilization of l-glutamate dehydrogenase and p-hydroxybenzoate hydroxylase on a Clark-type electrode
643
Development of an MSE-based chemical model for the solubility of calcium sulphate in mixed chloride–sulphate solutions
644
Development of an MSFIA-MPFS pre-treatment method for radium determination in water samples
645
Development of an n-3 fatty acid and α-tocopherol enriched dry fermented sausage
646
Development of an n-channel CCD, CCD-NeXT1, for Soft X-ray Imager onboard the NeXT satellite
647
Development of an n-channel CCD, CCD-NeXT1, for Soft X-ray Imager onboard the NeXT satellite
648
Development of an n-heptane-n-butanol-PAH mechanism and its application for combustion and soot prediction
649
Development of an N-heterocyclic carbene ligand based on concept of chiral mimetic
650
Development of an N-hydroxysuccinimidyl fluorescein-O-acetate-labeled probe for competitive capillary electrophoretic immunoassay of bovine serum albumin
651
Development of an N-sulfinyl prolinamide for the asymmetric aldol reaction
652
Development of an OAPCP-micropump liquid cooling system in a laptop
653
Development of an objective instrument to assess quality of life in social services: Reliability and validity in Spain
654
Development of an Objective Tool for Predicting Obstructive Sleep Apnea among Adults: PAN Apnea Index
655
Development of an object-oriented finite element program: application to metal-forming and impact simulations
656
Development of an object-oriented scheduling model for construction projects
657
Development of an observational error model
658
Development of an obstacle-avoiding mobile robotic platform using a low-end Tbudget PIC microcontroller
659
Development of an occupational exposure limit for n-propylbromide using benchmark dose methods
660
Development of an oceanographic towing vehicle adapted for fishing craft: Prototype and protocol for use
661
Development of an off-line capillary column IMAC phosphopeptide enrichment method for label-free phosphorylation relative quantification
662
Development of an Oil Field’s Conceptual Model
663
Development of an Oligidic Diet forin VitroRearing ofTrichogramma galloiZucchi andTrichogramma pretiosumRiley
664
Development of an oligosorbent for detection of ochratoxin A
665
Development of an on-board charge and discharge management system for electric-vehicle batteries
666
Development of an on-column affinity smart polymer gel glucose sensor Original Research Article
667
Development of an on-column enrichment technique based on C18-functionalized magnetic silica nanoparticles for the determination of lidocaine in rat plasma by high performance liquid chromatography
668
Development of an online analyzer of atmospheric H2O2 and several organic hydroperoxides for field campaigns
669
Development of an on-line electrochemical analyser for trace level aluminium Original Research Article
670
Development of an on-line extraction turbulent flow chromatography tandem mass spectrometry method for cassette analysis of Caco-2 cell based bi-directional assay samples
671
Development of an on-line high performance liquid chromatography detection system for human cytochrome P450 1A2 inhibitors in extracts of natural products
672
Development of an on-line Irish food composition database for nutrients
673
Development of an on-line Irish food composition database for nutrients
674
Development of an on-line isotope dilution laser ablation inductively coupled plasma mass spectrometry (LA–ICP-MS) method for determination of boron in silicon wafers
675
Development of an on-line matrix solid-phase dispersion/fast liquid chromatography/tandem mass spectrometry system for the rapid and simultaneous determination of 13 sulfonamides in grass carp tissues
676
Development of an on-line optical method for assessment of the bubble size and morphology in aerated food products
677
Development of an on-line preconcentration system for zinc determination in biological samples
678
Development of an online preparation system for multitracer solutions
679
Development of an on-line procedure for the indirect determination of iodide by flow-injection cold-vapor atomic absorption spectrometry
680
Development of an on-line size exclusion chromatographic — reversed-phase liquid chromatographic two-dimensional system for the quantitative determination of peptides with concentration prior to reversed-phase liquid chromatographic separation Original Re
681
Development of an on-line size exclusion chromatographic -reversed-phase liquid chromatographic two-dimensional system for the quantitative determination of peptides with concentration prior to reversed-phase liquid chromatographic separation
682
Development of an on-line tar measurement method based on photo ionization technique
683
Development of an online tool for tsunami inundation simulation and tsunami loss estimation
684
Development of an online two-dimensional nano-scale liquid chromatography/mass spectrometry method for improved chromatographic performance and hydrophobic peptide recovery
685
Development of an on-line weak-cation exchange liquid chromatography–tandem mass spectrometric method for screening aldehyde products in biological matrices
686
Development of an online-SPE-LC-MS method for the investigation of the intestinal absorption of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PHIP) and its bacterial metabolite PHIP-M1 in a Caco-2 Transwell system
687
Development of an on-site screening system for amphetamine-type stimulant tablets with a portable attenuated total reflection Fourier transform infrared spectrometer Original Research Article
688
Development of an on-time logger for irrigation systems
689
Development of an on-time logger for irrigation systems
690
Development of an operational model-based warning system for tropospheric ozone concentrations in Bordeaux, France
691
Development of an operational procedure to estimate surface albedo from the SEVIRI/MSG observing system by using POLDER BRDF measurements: I. Data quality control and accumulation of information corresponding to the IGBP land cover classes
692
Development of an operational procedure to estimate surface albedo from the SEVIRI/MSG observing system by using POLDER BRDF measurements: II. Comparison of several inversion techniques and uncertainty in albedo estimates
693
Development of an operational synaptobrevin-based fluorescent substrate for tetanus neurotoxin quantification
694
Development of an operations evaluation system for sinking EDM
695
Development of an optical ammonia sensor based on polyaniline/epoxy resin (SU-8) composite
696
Development of an optical biosensor assay for detection of (beta)-lactam antibiotics in milk using the penicillin-binding protein 2x
697
Development of an optical biosensor assay for detection of β-lactam antibiotics in milk using the penicillin-binding protein 2x* Original Research Article
698
Development of an optical biosensor using gold nanoparticles and quantum dots for the detection of Porcine Reproductive and Respiratory Syndrome Virus
699
Development of an optical chemical sensor based on 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol in Nafion for determination of nickel ion
700
Development of an optical current transducer with a bulk type Faraday sensor for metering
701
Development of an optical current transformer for adjustable speed pumped storage systems
702
Development of an optical device for thermal neutrons by amorphous perfluoropolymer
703
Development of an optical device for thermal neutrons by amorphous perfluoropolymer
704
Development of an optical fibre reflectance sensor for copper (II) detection based on immobilised salicylic acid
705
Development of an optical fibre reflectance sensor for lead detection based on immobilised arsenazo III
706
Development of an optical fibre reflectance sensor for p-aminophenol detection based on immobilised bis-8-hydroxyquinoline
707
Development of an optical flow-through biosensor for the determination of sulphite in environmental samples
708
Development of an optical hydrogen sulphide sensor
709
Development of An Optical Sensor Based on Sol-gel Doped with 2,6-Dichlorophenol Indophenol for Analysis of Ascorbic Acid
710
Development of an optical sensor for 2D multi-point alignment
711
Development of an optical sensor for 2D multi-point alignment
712
Development of an optical sensor for determination of zinc by application of PC-ANN
713
Development of an optical sensor for determination of zinc by application of PC-ANN
714
Development of an optical sensor for dynamic monitoring of off-round and eccentric errors of cylindrical parts
715
Development of an Optical Sensor for the Measurement of the Material Flow in Deep Drawing Processes
716
Development of an optical sensor probe for the detection of dissolved carbon dioxide
717
Development of an optical surface plasmon resonance biosensor assay for (fluoro)quinolones in egg, fish, and poultry meat Original Research Article
718
Development of an optical voltage transformer for power protection relays
719
Development of an optimal bacterial medium based on the growth inhibition assay with Vibrio fischeri
720
Development of an optimal charging algorithm of a Ni-MH battery for stationary fuel cell/battery hybrid system application
721
Development of an optimal contracting strategy using genetic algorithms in the England and Wales standing reserve market
722
Development of an optimal daylighting controller
723
Development of an optimal formulation for oxidative stability of walnut-beverage emulsions based on gum arabic and xanthan gum using response surface methodology
724
Development of an optimal hybrid finite volume/element method for viscoelastic flows
725
Development of An Optimal Low-Noise Voice-Coil Actuator for Precision Motion Control Applications
726
Development of an Optimal Medium for Continuous Ferrous Iron Oxidation by Immobilized Acidothiobacillus ferrooxidans Cells
727
Development of an optimal preventive maintenance model based on the reliability assessment for air-conditioning facilities in office buildings
728
Development of an optimal X-ray beam for dual-mode emission and transmission mammotomography
729
Development of an optimal X-ray beam for dual-mode emission and transmission mammotomography
730
DEVELOPMENT OF AN OPTIMISATION MODEL FOR AUTOMOTIVE COMPONENT REUSE
731
Development of an optimised irrigation system selection model using analytical hierarchy process
732
Development of an Optimised Losartan Potassium Press-Coated Tablets for Chronotherapeutic Drug Delivery
733
Development of an optimised papaya pulp nectar using a combination of irradiation and mild heat
734
Development of an optimised, standard-compliant procedure to calculate sound transmission loss: design of transmission rooms
735
Development of an optimised, standard-compliant procedure to calculate sound transmission loss: numerical measurements
736
Development of an optimization model for water resources systemsplanning
737
Development of an optimization model for water resources systemsplanning
738
Development of an optimization strategy for insulation thickness of a domestic refrigerator-freezer
739
Development of an optimized artificial neural network model for combined heat and power micro gas turbines
740
Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance
741
Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance
742
Development of an optimized dextran retention test for large pore size hollow fiber ultrafiltration membranes
743
Development of an Optimized Feeding Technology for Dairy Cows
744
Development of an optimized multi-biomarker panel for the detection of lung cancer based on principal component analysis and artificial neural network modeling
745
Development of an optimized peptide map for recombinant activated human protein C by means of an experimental design strategy
746
Development of an optimized, simple chemically defined medium for bacterial cellulose production by Acetobacter sp. A9 in shaking cultures
747
Development of an optimum design program (SUSB-OPTIMUM) for the life cycle CO2 assessment of an apartment house in Korea
748
Development of an Optoelectrostatic Micropump Using a Focused Laser Beam in a High-Frequency Electric Field
749
Development of an opto-hydrodynamic process to remove nanoparticles from solid surfaces
750
Development of an optrode membrane for the determination of picric acid based on fluorescence energy transfer
751
Development of an oral cancer slope factor for Aroclor 1268
752
Development of an oral tolerance model in rats for investigation of bioactive food components
753
Development of an orange juice in-house reference material and its application to guarantee the quality of vitamin C determination in fruits, juices and fruit pulps
754
Development of an orexin-2 receptor selective agonist, [Ala11, -Leu15]orexin-B
755
Development of an organically bound tritium standard
756
Development of an organo- and enzyme-catalysed one-pot, sequential three-component reaction
757
Development of an original active thermography method adapted to ITER plasma facing components control
758
Development of an original model for the synthesis of silicon nanodots by Low Pressure Chemical Vapor Deposition
759
Development of an orthogonal method for mometasone furoate impurity analysis using supercritical fluid chromatography
760
Development of an oscillating/rotating/pulsating toothbrush: The Oral-B professionalCare™ series
761
Development of an outerdirected style of problem solving in individuals with and without mental retardation
762
Development of an oxazolopyridine series of dual thrombin/factor Xa inhibitors via structure-guided lead optimization
763
Development of an oxidase-based glucose sensor using thickness-shear-mode quartz crystals
764
Development of an oxidative dehydrogenation-based fluorescent probe for Cu2+ and its biological imaging in living cells Original Research Article
765
Development of an oxide dispersion strengthened, reduced-activation steel for fusion energy
766
Development of an oxycoal swirl burner operating at low O2 concentrations
767
Development of an oxygen sensor for molter 44.5% lead–55.5% bismuth alloy
768
Development of an ozone gas sensor using single-walled carbon nanotubes
769
Development of an r.f. driven negative hydrogen ion source
770
Development of an RF-input coupler with a multi-loop antenna for the RFQ linac in IFMIF project
771
Development of an RNA detection system using bioluminescence resonance energy transfer
772
Development of an RNA isolation procedure for the characterisation of human endothelial cell interactions with polyurethane cardiovascular bypass grafts
773
Development of an RP-HPLC method for the simultaneous determination of benzoic acid, sorbic acid, natamycin and lysozyme in hard and pasta filata cheeses
774
Development of an RP-HPLC-UV Method for Simultaneous Detection of Nimodipine and its Metabolite in Cerebrospinal Fluid of Rat
775
Development of an RSA calibration system with improved accuracy and precision
776
Development of an RT-PCR for the detection of little cherry virus and characterization of some isolates occurring in Europe
777
Development of an SNP Marker for Sugar Beet Resistance/Susceptible Genotyping to Root-Knot Nematode
778
Development of an SPME–GC–MS/MS method for the determination of pesticides in rainwater: Laboratory and field experiments
779
Development of an SPME–GC–MS/MS procedure for the monitoring of 2-phenoxyethanol in anaesthetised fish
780
Development of an UAS for post-earthquake disaster surveying and its application in Ms7.0 Lushan Earthquake, Sichuan, China
781
Development of an ultra low field-ripple electromagnet
782
Development of an ultra low field-ripple electromagnet
783
Development of an ultra sonic phased array system for nondestructive tests of nuclear power plant components Original Research Article
784
Development of an ultrafine grained ferrite in a low C–Mn and Nb–Ti microalloyed steels after warm torsion and intercritical annealing
785
Development of an ultra-fine grained V-1.7 mass% Y alloy dispersed with yttrium compounds having superior ductility and high strength
786
Development of an ultra-fine grained V–1.7 mass% Y alloy dispersed with yttrium compounds having superior ductility and high strength
787
Development of an ultra-high performance liquid chromatography analytical methodology for the profiling of olive (Olea europaea L.) pulp proteins Original Research Article
788
Development of an ultra-high-performance liquid chromatography–tandem mass spectrometry method for high throughput determination of organophosphorus flame retardants in environmental water
789
Development of an ultra-high-pressure liquid chromatography–tandem mass spectrometry multi-residue sulfonamide method and its application to water, manure slurry, and soils from swine rearing facilities
790
Development of an ultrahigh-resolution Si-PM-based dual-head GAGG coincidence imaging system
791
Development of an ultrahigh-resolution Si-PM-based dual-head GAGG coincidence imaging system
792
Development of an ultra-high-speed scanning neutron tomography system for high-quality and four-dimensional visualizations
793
Development of an ultra-high-speed scanning neutron tomography system for high-quality and four-dimensional visualizations
794
Development of an ultra-low temperature scanning tunneling microscope and applications for low temperature physics Original Research Article
795
Development of an ultra-performance liquid chromatography–mass spectrometry method for the detection of lipophilic marine toxins
796
Development of an ultrasensitive electrochemiluminescence inhibition method for the determination of tetracyclines Original Research Article
797
Development of an ultrasensitive enzyme immunoassay for human proadrenomedullin N-terminal 20 peptide and direct measurement of two molecular forms of PAMP in plasma from healthy subjects and patients with cardiovascular disease
798
Development of an ultrasonic elliptic-vibration shoe centerless grinding technique
799
Development of an ultrasonic experimental device to characterise concrete for structural repair
800
Development of an ultrasonic motor as a fine-orienting stage
801
Development of an ultrasonic test method for the non-destructive examination of ITER divertor components
802
Development of an ultrasound-assisted emulsification–microextraction method for the determination of the main compounds causing cork taint in wines
803
Development of an ultrasound-assisted extraction method for biomonitoring of vanadium and nickel in the coastal environment under the influence of the Prestige fuel spill (North east Atlantic Ocean) Original Research Article
804
Development of an ultrathin BD-PCD wheel-tool for in situ microgroove generation on NAK80 mold steel
805
Development of an ultra-violet digital camera for volcanic SO2 imaging
806
Development of an unannounced standardized patient protocol to evaluate opioid use disorder treatment in pregnancy for American Indian and rural communities
807
Development of an unbalanced switching scheme for a current source inverter
808
Development of an undergraduate course – Internet-based instrumentation and control
809
Development of an underground radon detector using an optical fiber
810
Development of an universal group contribution equation of state: I. Prediction of liquid densities for pure compounds with a volume translated Peng–Robinson equation of state
811
DEVELOPMENT OF AN UNIVERSAL PAINT STRIPPER FOR METALS
812
DEVELOPMENT OF AN UNMANNED UNDERWATER REMOTELY OPERATED CRAWLER (ROC) FOR MONITORING APPLICATION
813
Development of an urban energy demand forecasting system to support environmentally friendly urban planning
814
Development of an urban inventory for road transport emissions of NO2 and comparison with estimates derived from ambient measurements
815
Development of an X-ray detector using surface plasmon resonance
816
Development of an X-ray detector using surface plasmon resonance
817
Development of an X-ray imaging microcalorimeter with a pixel-type Ir transition edge sensor
818
Development of an X-ray imaging microcalorimeter with a pixel-type Ir transition edge sensor
819
Development of an xspec-based spectral analysis system for the coded-aperture hard X-ray balloon payload EXITE2
820
Development of anaerobic digestion methods for palm oil mill effluent (POME) treatment
821
Development of anaerobic migrating blanket reactor (AMBR), a novel anaerobic treatment system
822
Development of analysis of volatile polyfluorinated alkyl substances in indoor air using thermal desorption-gas chromatography–mass spectrometry
823
Development of analysis tools for social, economic and ecological effects of water reuse Original Research Article
824
Development of analytic microdevices for the detection of phenol using polymer hydrogel particles containing enzyme–QD conjugates
825
Development of analytical and preparative chromatographic separations of novel growth hormone secretagogue compounds
826
Development of Analytical Method for Detection of Some Pharmaceuticals in Surface Water
827
Development of analytical methodology for quantitation of organic and inorganic compounds in air particulate matters
828
Development of analytical methods for multiresidue determination of quinolones in pig muscle samples by liquid chromatography with ultraviolet detection, liquid chromatography–mass spectrometry and liquid chromagraphy–tandem mass spectrometry
829
Development of analytical methods for the assessment of ecotoxicological relevant soil contamination : Part B — Ecotoxicological Analysis in Soil and Soil Extracts
830
Development of analytical methods for the assessment of ecotoxicological relevant soil contamination- Part A - Development and improvement of soil extraction methods for the determination of the bioavailable parts of contaminants
831
Development of analytical methods for the determination of tenuazonic acid analogues in food commodities
832
Development of Analytical Probabilistic Model Parameters for Urban Stormwater Management
833
Development of analytical procedure for the determination of methyltin, butyltin, phenyltin and octyltin compounds in landfill leachates by gas chromatography–inductively coupled plasma mass spectrometry Original Research Article
834
Development of analytical procedures to study changes in the composition of meat phospholipids caused by induced oxidation
835
Development of analytical systems for the simultaneous determination of the speciation of arsenic [As(III), methylarsonic acid, dimethylarsinic acid, As(V)] and selenium [Se(IV), Se(VI)] Original Research Article
836
Development of analytical techniques for ultra trace amounts of nuclear materials in environmental samples using ICP-MS for safeguards
837
Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films
838
Development of Androgen Receptor Antagonists with Promising Activity in Castration-Resistant Prostate Cancer
839
Development of aneuploidy and nuclear pleomorphism in thyroid follicular cells of TGCT transgenic mice
840
DEVELOPMENT OF ANFIS-PSO, SVR-PSO, an‎d ANN-PSO HYBRID INTELLIGENT MODELS FOR PREDICTING THE COMPRESSIVE STRENGTH OF CONCRETE
841
Development of angle indexes for soil moisture estimation, dry matter detection and land-cover discrimination
842
Development of Animal Drawn Groundnut Planting Machine for Small Holdings Farmers in North Kordofan of Sudan
843
Development of animal feeding additives from mushroom waste media of shochu lees
844
Development of Animal Recognition: A Difference between Parts and Wholes
845
Development of anion selective polymer membrane electrodes based on lutetium(III) porphyrins Original Research Article
846
Development of anion-exchange/reversed-phase high performance liquid chromatography–inductively coupled plasma-mass spectrometry methods for the speciation of bio-available iodine and bromine from edible seaweed
847
Development of anisotropic microstructure in uniaxially pressed alumina compacts
848
Development of anisotropic particle morphology in an isotropically transforming matrix
849
Development of anisotropic permeability during coalbed methane production
850
Development of ANN model for geothermal district heating system and a novel PID-based control strategy
851
Development of annealing process for solution-derived high performance InGaZnO thin-film transistors
852
Development of annular-type virtual impactor
853
Development of anodic film on Mg alloy AZ91D
854
Development of anodic stripping voltammetry for determination of gallium in U–Ga alloy
855
Development of Antarctic herb tundra vegetation near Arctowski station, King George Island
856
Development of anthropomorphic multi-D.O.F master-slave arm for mutual telexistence
857
Development of anti-atherosclerotic tissue-engineered blood vessel by A20-regulated endothelial progenitor cells seeding decellularized vascular matrix
858
Development of antibacterial polyamide reverse osmosis membrane modified with a covalently immobilized enzyme
859
Development of Antibiotic Activity Profile Screening for the Classification and Discovery of Natural Product Antibiotics Original Research Article
860
Development of Antibiotic Releasing Electrospun Nanofibrous Mats Based on Gelatin
861
Development of antibody-based microarray assay for quantitative detection of aflatoxin B1
862
Development of anti-corrosion coating on low activation materials against fluoridation and oxidation in Flibe blanket environment
863
Development of antifouling properties and performance of nanofiltration membranes modified by interfacial polymerisation Original Research Article
864
Development of antifouling thin-film-composite membranes for seawater desalination
865
Development of anti-fungal mortar and concrete using Zeolite and Zeocarbon microcapsules
866
Development of antifungal packaging for berries extruded from recycled PET
867
Development of anti-Helicobacter pylori immunoglobulins Y (IgYs) in quail
868
DEVELOPMENT OF ANTILOCK BRAKING SYSTEM USING ELECTRONIC WEDGE BRAKE MODEL
869
Development of antimicrobial cellulose packaging through laccase-mediated grafting of phenolic compounds
870
Development of antimicrobial chitosan based nanofiber dressings for wound healing applications
871
Development of antimicrobial cotton fabrics using herb loaded nanoparticles
872
Development of antimicrobial defatted soybean meal-based edible films incorporating the lactoperoxidase system by heat pressing Original Research Article
873
Development of antimicrobial films for microbiological control of packaged salad
874
Development of anti-microbial jute fabrics via in situ formation of cellulose–tannic acid–metal ion complex
875
Development of anti-microbial jute fabrics via in situ formation of cellulose–tannic acid–metal ion complex
876
Development of antimicrobial jute packaging using chitosan and chitosan–metal complex
877
Development of antimicrobial jute packaging using chitosan and chitosan–metal complex
878
Development of antimicrobial resistance in Campylobacter jejuni and Campylobacter coli adapted to biocides
879
Development of Antimicrobial Therapy Methods to Overcome the Antibiotic Resistance of Acinetobacter baumannii
880
Development of antioxidant active films containing tocopherols to extend the shelf life of fish
881
Development of Antioxidant Activity during Milk Fermentation by Wild Isolates of Lactobacillus helveticus
882
Development of antioxidant food packaging materials with controlled release properties Original Research Article
883
Development of antioxidant rich peptides from milk protein by microbial proteases and analysis of their effects on lipid peroxidation in cooked beef
884
Development of anti-phenylurea antibody purification techniques for improved environmental applications Original Research Article
885
Development of antiproliferative phenylmaleimides that activate the unfolded protein response Original Research Article
886
Development of antireflection coatings with a 6LiF/62Ni multilayer converter for ultracold neutron detectors
887
Development of antireflection coatings with a 6LiF/62Ni multilayer converter for ultracold neutron detectors
888
Development of antischistosomal drugs in China, with particular consideration to praziquantel and the artemisinins
889
Development of antitaxial strain fringes during non-coaxial deformation: an experimental study
890
Development of antitubercular compounds based on a 4-quinolylhydrazone scaffold. Further structure–activity relationship studies Original Research Article
891
Development of anti-wear and anti-bacteria TaN-(Ag,Cu) thin films — a review
892
Development of anti-zearalenone monoclonal antibody and detection of zearalenone in corn products from China by ELISA
893
Development of Anxiety and Depression Inventory for Secondary School Students in Iran (A & D Inventory)
894
Development of anxiety disorders in a traumatized pediatric population: A preliminary longitudinal evaluation
895
Development of Aortic Valves With 2 and 3 Leaflets
896
Development of APD readout for pure-CsI crystals at cryogenic temperatures
897
Development of APD readout for pure-CsI crystals at cryogenic temperatures
898
Development of apothecia of the eyespot pathogen Tapesia on cereal crop stubble residue in England
899
Development of apparatus for magnetic measurements of Charpy impact test pieces
900
Development of apparatus for multiple energy X-ray holography at SPring-8
901
Development of apparatus for multiple energy X-ray holography at SPring-8
902
Development of apple certified reference material for quantification of organophosphorus and pyrethroid pesticides
903
Development of applications of industrial enzymes from Malaysian indigenous microbial sources
904
Development of approach for reliability assessment of pipeline network systems
905
Development of appropriate thickness ceramic coatings on 316 L stainless steel for biomedical applications
906
Development of approximate formula for LDL-chol, LDL-apo B and LDL-chol/LDL-apo B as indices of hyperapobetalipoproteinemia and small dense LDL Original Research Article
907
Development of aptamer-conjugated magnetic graphene/gold nanoparticle hybrid nanocomposites for specific enrichment and rapid analysis of thrombin by MALDI-TOF MS
908
Development of aqua epoxy for repair and strengthening of RC structural members in underwater
909
Development of aqueous oxidative Ugi-type reactions by copper-catalyzed surfactant-promoted C(sp3)–H direct functionalization in water
910
Development Of Arabic Language And Literature In India
911
Development of arbitrary-order multioperators-based schemes for parallel calculations. 1: Higher-than-fifth-order approximations to convection terms
912
Development of arbitrary-order multioperators-based schemes for parallel calculations.: Part 2: Families of compact approximations with two-diagonal inversions and related multioperators
913
Development of arching action in longitudinally-restrained reinforced concrete beams
914
Development of arcing horn device for interrupting ground-fault current of 77 kV overhead lines
915
Development of ARMS-PCR Method to Detect Two Mutations of MTHFR Gene (C677T, A1298C) in Suspected Cases of Thrombosis
916
Development of aromatic polyamide membranes for pervaporation and vapor permeation
917
Development of aromatic ring size in bituminous coals during heat treatment in the plastic temperature range
918
Development of arrays of transition edge sensors for application in X-ray astronomy
919
Development of arrays of transition edge sensors for application in X-ray astronomy
920
Development of artemisinin and its structurally simplified trioxane derivatives as antimalarial drugs
921
Development of arthrosis following dislocation of the shoulder: A case-control study
922
Development of Artificial Hand Gripper by using Microcontroller
923
Development of Artificial Intelligence as a Conversion Tool for Cine Electronic Portal Imaging Device Images to Radiotherapy Dosimetry: Preliminary Study
924
Development of artificial neural network models for predicting water saturation and fluid distribution
925
Development of Artificial Neural Networks (ANNs) to Synthesize Petrophysical Well Logs
926
Development of ARX model based off-line FDD technique for energy efficient buildings
927
Development of A-scan ultrasound technique for measuring local particle concentration in slurry flows
928
Development of as-cast dual matrix structure (DMS) ductile iron
929
Development of a-Si:H/c-Si heterojunctions for the i2-module concept: Low-temperature passivation and emitter formation on wafers bonded to glass
930
Development of Asiaʹs emerging capital market: What lies ahead
931
Development of Assays for Assessing Induced Systemic Resistance by Plant Growth-Promoting Rhizobacteria against Blue Mold of Tobacco
932
Development of assemblages associated with alvinellid colonies on the walls of high-temperature vents at the East Pacific Rise
933
Development of assessing generic and specific technical skills in laparoscopic surgery
934
Development of assessment model for demand-side management investment programs in Korea
935
Development of asymmetric 6FDA-2,6 DAT hollow fiber membranes for CO2/CH4 separation: 1. The influence of dope composition and rheology on membrane morphology and separation performance
936
Development of asymmetric 6FDA-2,6DAT hollow fiber membranes for CO2/CH4 separation: Part 2. Suppression of plasticization
937
Development of asymmetric BTDA-TDI/MDI (P84) copolyimide flat sheet and hollow fiber membranes for ultrafiltration: Morphology transition and membrane performance Original Research Article
938
Development of asymmetric BTDA-TDI/MDI (P84) co-polyimide hollow fiber membranes for ultrafiltration: the influence of shear rate and approaching ratio on membrane morphology and performance
939
Development of asymmetric gradational-changed porous chitosan membrane for guided periodontal tissue regeneration
940
Development of Asymmetric Rolling as a Severe Plastic Deformation Method: A Review
941
Development of asymmetrical flow field-flow fractionation–multi angle laser light scattering analysis for molecular mass characterization of cationic potato amylopectin
942
Development of athermal ε-martensite in atomized Co–Cr–Mo–C implant alloy powders
943
Development of atherosclerosis in Balb/c apolipoprotein E-deficient mice
944
Development of atherosclerosis in the diabetic BALB/c mice: Prevention with Vitamin E administration
945
Development of atherosclerosis over a 25 year period: an epidemiological autopsy study in males of 11 towns
946
Development of atherosclerotic plaque with endothelial disruption in Watanabe heritable hyperlipidemic rabbit aortas
947
Development of Atlantic cod (Gadus morhua) exposed to produced water during early life stages: Effects on embryos, larvae, and juvenile fish
948
Development of atmospheric monitoring system at Akeno Observatory for the Telescope Array project
949
Development of atmospheric monitoring system at Akeno Observatory for the Telescope Array project
950
Development of atmospheric NO analyzer by using a laser-induced fluorescence NO2 detector
951
Development of atom probe specimen preparation techniques for specific regions in steel materials
952
Development of atom probe specimen preparation techniques for specific regions in steel materials
953
Development of atomic beam probe for tokamaks
954
DEVELOPMENT OF ATTITUDE SCALE DEVOTED TO THE USAGE OF TECHNOLOGY IN PRE-SCHOOL EDUCATİON
955
Development Of Attitude Scale Towards Proof and Proving: The Case Of Mathematics Student Teachers
956
Development of A-type olivine fabric in water-rich deep upper mantle
957
Development of Au/La1−xSrxMnO3 nanocomposites for further application in a solid oxide fuel cell type reactor
958
Development of Au-coated THGEM for single photon, charged particle, and neutron detection
959
Development of Au-coated THGEM for single photon, charged particle, and neutron detection
960
Development of audible locating signals for use at pedestrian crossings
961
Development of audit system for intellectual property management excellence
962
Development of auditory evoked fields in human fetuses and newborns: A longitudinal MEG study
963
Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process
964
Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process
965
Development of austenite free ADI (austempered ductile cast iron)
966
development of autograph-based learning tools to improve mathematical communication skills students in vocational high school
967
Development of Autologous T Lymphocytes in Two Males with X-Linked Severe Combined Immune Deficiency: Molecular and Cellular Characterization
968
Development of automated communication of system for managing site information using internet technology
969
Development of Automated Intravenous Blood Infusion Monitoring System using Load Cell Sensor
970
Development of automated online gel permeation chromatography–gas chromatograph mass spectrometry for measuring multiresidual pesticides in agricultural products
971
Development of automated operating procedure system using fuzzy colored petri nets for nuclear power plants
972
Development of automated surface seawater nitrate mapping systems for use in open ocean and coastal waters
973
Development of Automatic Feeding Machine for Aquaculture Industry
974
Development of automatic grading machine prototype for citrus using image processing
975
Development of Automatic/Manual Power Off, Power Change over Device
976
Development of autonoetic autobiographical memory in school-age children: Genuine age effect or development of basic cognitive abilities?
977
Development of autonomous bio-production vehicle for agriculture
978
Development of Autonomous Cruise Control System for Convoy Vehicle
979
Development of Auxotrophic Agrobacterium tumefaciens for Gene Transfer in Plant Tissue Culture
980
Development of avalanche-drift and avalanche-pixel detectors for single photon detection and imaging in the optical regime
981
Development of avalanche-drift and avalanche-pixel detectors for single photon detection and imaging in the optical regime
982
Development of AZ31 Mg alloy wrought process route without protective gas
983
Development of azithromycin–PLGA nanoparticles: Physicochemical characterization and antibacterial effect against Salmonella typhi
984
DEVELOPMENT OF BACKGROUND VALUES FOR INORGANICS IN GROUND WATER
985
DEVELOPMENT OF BACKGROUND VALUES FOR INORGANICS IN GROUND WATER
986
Development of badlands and gullies in the Sneeuberg, Great Karoo, South Africa
987
Development of Ba-hexaferrite coatings for electromagnetic wave absorption applications
988
Development of bainitic rail steels with potential resistance to rolling contact fatigue
989
Development of Barkhausen noise calibration blocks for reliable grinding burn detection
990
Development of Ba-SAPO-34 Zeolite Membrane for Separation of CO2 in the Binary Gas Mixtures
991
Development of base-dopable polymers
992
Development of Basic Prequisites of Quality Education System in PhD Studies at the Faculties of Health Sciences in Bosnia and Herzegovina
993
Development of Batch Injection Analysis for Electrochemical Measurements of Trace Metal Ions in Ecotoxicological Test Media
994
Development of battery management system for nickel–metal hydride batteries in electric vehicle applications
995
Development of Bayesian Inference to Predict household Trip Production (Case Study of Isfahan City)
996
Development of B-cell memory and effector function
997
Development of BCU classifiers for on-line dynamic contingency screening of electric power systems
998
Development of Be/DSCu HIP bonding and thermo-mechanical evaluation
999
Development of beam probe diagnostics and recent measurements on the TJ-1 and T-10 tokamaks
1000
Development of beam source and bushing for ITER NB system