<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Modeling and analysis of software rejuvenation in a server virtualized system with live VM migration
2
Modeling and analysis of startup of a loop heat pipe
3
Modeling and analysis of static and dynamic characteristics for buck-type three-phase PWM rectifier by circuit DQ transformation
4
Modeling and analysis of stoichiometric two-patch consumer–resource systems
5
Modeling and analysis of supercritical flow instability in parallel channels
6
Modeling and analysis of the dynamic behavior of mechanisms that result in the development of inner radial humps in the concentration of a single adsorbate in the adsorbed phase of porous adsorbent particles observed in confocal scanning laser microscopy
7
Modeling and Analysis of the Dynamics of an Omni-directional Mobile Manipulators System
8
Modeling and analysis of the electrical properties of PZT through neural networks
9
Modeling and analysis of the electrical resistance measurement of carbon fiber polymer–matrix composites
10
Modeling and analysis of the forced Fisher equation Original Research Article
11
Modeling and analysis of the induced signal detected in electrostatic ion beam trap for mass spectrometry
12
Modeling and analysis of the induced signal detected in electrostatic ion beam trap for mass spectrometry
13
Modeling and analysis of the in-plane vibration of a complex cable-stayed bridge
14
Modeling and analysis of the latent period of osteosarcomas induced by incorporated 239Pu: The role of immune responses
15
Modeling and analysis of the material removal depth for stone polishing
16
Modeling and analysis of the material removal profile for free abrasive polishing with sub-aperture pad
17
Modeling and analysis of the meta-population dynamics of lymphocyte repertoires
18
Modeling and analysis of the product assignment problem in single stage electronic assembly systems
19
Modeling and analysis of the pyrolysis of bio-oil aqueous fraction in a fixed-bed reactor
20
Modeling and analysis of the rapidly resolidified layer of SG cast iron in the EDM process through the response surface methodology
21
Modeling and analysis of the spread of computer virus
22
Modeling and analysis of the unilateral contact of a piezoelectric body with a conductive support
23
Modeling and analysis of the vibration behavior of a shape memory alloy beam
24
Modeling and analysis of the vibration behavior of a shape memory alloy beam
25
Modeling and analysis of the vibration behavior of a shape memory alloy beam
26
Modeling and analysis of thermal damping in heat exchanger tube bundles Original Research Article
27
Modeling and Analysis of Thermoelectric Modules
28
Modeling and analysis of thrust force for EPB shield tunneling machine
29
Modeling and analysis of tilt-rotor aeromechanical phenomena
30
Modeling and analysis of timed Petri nets using heaps of pieces
31
Modeling and analysis of two-flow interactions in wireless networks
32
Modeling and analysis of two-location algorithm with implicit registration in CDMA personal communication network
33
Modeling and analysis of unbalanced distribution system using object-oriented methodology
34
Modeling and analysis of vacuum membrane distillation for the recovery of volatile aroma compounds from black currant juice
35
Modeling and analysis of variable speed single phase induction motors with iron loss
36
Modeling and Analysis of Vehicles Flows on the Road
37
Modeling and Analysis of Viscous Dissipation Phenomenon on Temperature Distribution in the Process of Injection Explosive Fluid
38
Modeling and analysis of water-hammer in coaxial pipes
39
Modeling and analysis of wireless networks: Selected papers from MSWiM 2007
40
Modeling and analysis of wound integrated LCT structure for single stage resonant PFC rectifier
41
Modeling and analysis using hybrid Petri nets
42
Modeling and analytic problems for a generalized Boltzmann equation for a multicomponent reacting gas
43
Modeling and Analytical Simulation of Anterior Polymerization in the Presence of an Inert Material
44
Modeling and analytical simulation of rotating disk ultrafiltration module
45
Modeling and Analyzing a Complex Real-World Conflict Using the Graph Model for Conflict Resolution
46
Modeling and analyzing a physician clinic environment using discrete-event (visual) simulation
47
Modeling and Analyzing Adaptive User-Centric Systems in Real-Time Maude
48
Modeling and analyzing finite state automata in the finite field F2 Original Research Article
49
Modeling and Analyzing Hydrocyclone Performances
50
Modeling and Analyzing Incremental Quantity Discounts in Transportation Costs for a Joint Economic Lot Sizing Problem
51
Modeling and analyzing of botnet interactions
52
Modeling and analyzing pricing and inventory problem in a closed-loop supply chain with return policy and multiple manufacturers and multiple sales channels using game theory
53
Modeling and Analyzing Stem-Cell Therapy toward Cancer: Evolutionary Game Theory Perspective
54
Modeling and Analyzing Supporting Systems for Smart Manufacturing Systems with Stochastic, Technical and Economic Dependences
55
Modeling and analyzing the correctness of geographic face routing under realistic conditions
56
Modeling and analyzing the effects of heat treatment on the characteristics of magnesium alloy joint welded by the tungsten-arc inert gas welding
57
Modeling and analyzing the hydriding kinetics of Mg–LaNi5 composites by Chou model
58
Modeling and analyzing the performance of adaptive hierarchical networks
59
Modeling and application of a stochastic drag for fibers in turbulent flows
60
Modeling and application of coalbed methane recovery performance based on a triple porosity/dual permeability model
61
Modeling and application of direct-expansion solar-assisted heat pump for water heating in subtropical Hong Kong
62
Modeling and application of MR dampers in semi-adaptive structures
63
Modeling and assessing hydrologic processes for historical and potential land-cover change in the Duoyingping watershed, southwest China
64
Modeling and Assessing the Consequences of Oil Pipeline Leakage Using PHAST Software: A Case Study; Jarahi River in Southwest of Iran
65
Modeling and assimilation of root zone soil moisture using remote sensing observations in Walnut Gulch Watershed during SMEX04
66
Modeling and Automated Containment of Worms
67
Modeling and availability analysis of internet data center with various maintenance policies
68
Modeling and Backstepping-based Nonlinear Control Strategy for a 6 DOF Quadrotor Helicopter
69
Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities
70
Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities
71
Modeling and bending vibration control of nonuniform thin-walled rotating beams incorporating adaptive capabilities
72
Modeling and Biokinetics in Anaerobic Acidogenesis of Starch-Processing Wastewater to Acetic Acid
73
Modeling and broadening temporal user interest in personalized news recommendation
74
Modeling and calculating the effect of treatment at baseline from panel outcomes
75
Modeling and calculation of electromagnetic field in the surroundings of a large power transformer
76
Modeling and calculation of field emission enhancement factor for carbon nanotubes array
77
Modeling and calculation of field emission enhancement factor for carbon nanotubes array
78
Modeling and calculation of open carbon dioxide refrigeration system
79
Modeling and characterization of a bimorph impedance transducer
80
Modeling and characterization of a chemomechanical actuator using protein transporter
81
Modeling and characterization of a radiation sensitive p-channel transistor in a floating n-well
82
Modeling and characterization of a radiation sensitive p-channel transistor in a floating n-well
83
Modeling and Characterization of Air Pollution: Perspectives and Recent Developments with a focus on the Campania Region (Southern Italy)
84
Modeling and characterization of atomically sharp “perfect” Ge/SiO2 interfaces
85
Modeling and characterization of damping in carbon nanofiber/polypropylene composites
86
Modeling and characterization of damping in carbon nanofiber/polypropylene composites
87
Modeling and characterization of dynamic failure of borosilicate glass under compression/shear loading
88
Modeling and characterization of fiber-reinforced (FRP) plastic honeycomb sandwich panels for bridge deck
89
Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications
90
Modeling and characterization of metal droplets generation by using a pneumatic drop-on-demand generator
91
Modeling and characterization of piezoelectric cantilever in fluids at different temperatures
92
Modeling and characterization of polyelectrolyte complex of polyaniline and sulfonated polystyrene produced by palm tree peroxidase
93
Modeling and characterization of sigma-delta analog-to-digital converters
94
Modeling and characterization of strengthened concrete tension members
95
Modeling and Characterization of the 3rd Order Charge-Pump PLL: a Fully Event-driven Approach
96
Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites
97
Modeling and characterization of the magnetocaloric effect in Ni2MnGa materials
98
Modeling and characterization of the polymer stud grid array (PSGA) package: electrical, thermal and thermo-mechanical qualification
99
Modeling and characterization of three kinds of MEMS resonators fabricated with a thick polysilicon technology
100
Modeling and characterization of two-phase composites by Voronoi diagram in the Laguerre geometry based on random close packing of spheres
101
Modeling and characterization of viscoelasticity of PI/SiO2 nanocomposite films under constant and fatigue loading
102
Modeling and classifying color textures using random fields in a random environment
103
Modeling and classifying color textures using random fields in a random environment^
104
Modeling and classifying color textures using random fields in a random environment^
105
Modeling and comparative thermal performance of ground air collector and earth air heat exchanger for heating of greenhouse
106
Modeling and Comparison of Optimized Isotherm Models for H2, N2, CO, CH4 and CO2 Adsorption Using Cuckoo Search Optimization Algorithm
107
Modeling and compensating non-uniformity in push-broom NIR hyperspectral imaging system
108
Modeling and Computation of Boundary-Layer Flows – Solutions Manual and Computer Programs: by T. Cebeci and J. Cousteix (Springer-Verlag, Berlin, Germany, 2001, 288 pp.) Euro 94,95 hardcover, ISBN 3-540-41227-1
109
Modeling and computation of cavitation in vortical flow
110
Modeling and computation of fluid–membrane interaction Original Research Article
111
Modeling and Computation of Random Thermal Fluctuations and Material Defects in the Ginzburg–Landau Model for Superconductivity
112
Modeling and computation of two phase geometric biomembranes using surface finite elements
113
Modeling and computational simulation of adsorption based chemical heat pumps
114
Modeling and computer simulation of the identification problem related to the sludge concentration in a settler
115
Modeling and computing throughput capacity of wireless multihop networks
116
Modeling and control approach to a distinctive quadrotor helicopter
117
Modeling and control design for governing hydroelectric turbines with leaky Wicket gates
118
Modeling and control design of a static synchronous series compensator
119
Modeling and control design of hydrogen production process for an active hydrogen/wind hybrid power system
120
Modeling and Control Electric and Heating Sources in a Building Using MPC
121
Modeling and Control for HIV/AIDS Transmission in China Based on Data from 2004 to 2016
122
Modeling and control for nonlinear structural systems via a NN-based approach
123
Modeling and control for thermal balancing of multi-core processors
124
Modeling and control in bioprocesses
125
Modeling and control issues for autonomous aerial refueling for UAVs using a probe–drogue refueling system
126
Modeling and control of a cascaded doubly-fed induction generator based on dynamical equivalent circuits Original Research Article
127
Modeling and control of a direct laser powder deposition process for Functionally Graded Materials (FGM) parts manufacturing
128
Modeling and control of a flexible rotor system with AMB-based sustentation
129
Modeling and control of a flexible solar array paddle as a clamped-free-free-free rectangular plate
130
Modeling and control of a helicopter slung-load system
131
Modeling and control of a mixed-flow rice dryer with emphasis on breakage quality Original Research Article
132
Modeling and Control of a Naphtha Thermal Cracking Pilot Plant
133
Modeling and control of a natural circulation loop
134
Modeling and control of a new horizontal-shaft hybrid-type magnetic bearing
135
Modeling and Control of a Nonlinear Active Suspension Using Multi-Body Dynamics System Software
136
Modeling and Control of a Novel Six-Leg Three-Phase High-Power Converter for Low Voltage Fuel Cell Applications
137
Modeling and control of a PEM fuel cell based hybrid multilevel inverter
138
Modeling and Control of a Photovoltaic Energy System Using the State-Space Averaging Technique
139
Modeling and control of a piezoelectric actuator driven system with asymmetric hysteresis
140
Modeling and control of a pneumatically actuated inverted pendulum
141
Modeling and control of a push–pull converter for photovoltaic microinverters operating in island mode
142
Modeling and control of a semiconductor manufacturing process with an automata network: An example in plasma etch processing
143
Modeling and control of a SOFC-GT-based autonomous power system
144
MODELING AND CONTROL OF A VARIABLE SPEED VARIABLE PITCH ANGLE PROTOTYPE WIND TURBINE
145
Modeling and Control of a Variable-Speed Constant-Frequency Synchronous Generator With Brushless Exciter
146
Modeling and control of a web-fed machine
147
Modeling and control of a wind fuel cell hybrid energy system
148
Modeling and control of a wind turbine driven doubly fed induction generator
149
MODELING AND CONTROL OF ACETYLENE HYDROGENATION PROCESS
150
Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—I. Control-oriented modeling
151
Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system—II. Linear and adaptive nonlinear control
152
Modeling and control of an atomic force microscope using a piezoelectric tuning fork for force sensing
153
Modeling and control of an eddy current brake
154
Modeling and control of an industrial pressure screen
155
Modeling and control of an LDPE autoclave reactor
156
Modeling and Control of Autonomous Underwater Vehicle (AUV) In Heading and Depth Attitude via PPD Controller with State Feedback
157
Modeling and control of cement grinding processes
158
Modeling and Control of Compliant Assembly Systems
159
Modeling and Control of Contact Between Constrained Rigid Bodies
160
Modeling and Control of Cooperative Teleoperation Systems
161
Modeling and control of C-UPFC for power system transient studies
162
Modeling and control of DFIG-based variable-speed wind-turbine
163
Modeling and control of discrete event systems using finite state machines with variables and their applications in power grids
164
Modeling and control of distributed generation systems including PEM fuel cell and gas turbine
165
MODELING AND CONTROL OF DISTRIBUTED GENERATION SYSTEMS INCLUDING WIND AND GAS TURBINE ON AZARBAIJAN ELECTRIC NETWORK
166
Modeling and control of distributed thermal systems
167
Modeling and control of expressiveness in music performance
168
Modeling and control of flow problems by adaptation-based linear parameter varying models
169
Modeling and control of formations of nonholonomic mobile robots
170
MODELING AND CONTROL OF GAS TURBINE COMBUSTOR WITH DYNAMIC AND ADAPTIVE NEURAL NETWORKS
171
Modeling and control of hierarchical systems with fuzzy systems
172
Modeling and control of high-throughput screening systems in a max-plus algebraic setting
173
Modeling and control of high-throughput screening systems in a max-plus algebraic setting
174
Modeling and control of HVOF thermal spray processing of WC–Co coatings
175
Modeling and control of hybrid photovoltaic wind power system with battery storage
176
Modeling and control of hysteresis in magnetostrictive actuators
177
Modeling and control of impact in mechanical systems: theory and experimental results
178
Modeling and Control of Linear Two-time Scale Systems: Applied to Single-Link Flexible Manipulator
179
Modeling and control of MEMS with high speed synchronous micromotors and controllers/drivers-on-VLSI-chip Ics
180
Modeling and control of microgrid: An overview
181
MODELING AND CONTROL OF MULTI-LEVEL INVERTER FOR THREE-PHASE GRID-CONNECTED PHOTOVOLTAIC SOURCES
182
Modeling and control of nonlinear micro-distributed systems Original Research Article
183
Modeling and control of nonlinear systems using novel fuzzy wavelet networks: The output adaptive control approach
184
Modeling and Control of Oxygen Transfer in High Purity Oxygen Activated Sludge Process
185
Modeling and control of PEMFC based on least squares support vector machines
186
Modeling and control of physical processes using proper orthogonal decomposition
187
Modeling and control of power flow in a double-beam system
188
Modeling and control of quasi-keyhole arc welding process
189
Modeling and Control of Robot Manipulators [Book Reviews]
190
Modeling and control of robot manipulators: L. Sciavicco and B. Siciliano; Springer, Berlin, 2000, ISBN: 1-85233-221-2
191
Modeling and control of robot manipulators: Lorenzo Sciavicco and Bruno Siciliano; Mc Graw-Hill, New York, 1996, ISBN 0-07-114726-8
192
Modeling and control of thawing phenomena in solute-impregnated frozen foods Original Research Article
193
Modeling and control of the agitation–sedation cycle for critical care patients
194
Modeling and control of the doubly fed induction generator wind turbine
195
Modeling and control of the high damping behavior in Ti–Nb–O alloys
196
Modeling and control of the magnetic suspension system
197
Modeling and Control of Three-Phase Shunt Active Power Filter
198
Modeling and control of two manipulators handling a flexible object
199
Modeling and control of unbalanced three-phase systems containing PWM converters
200
Modeling and control of unified power flow controller for transient stability
201
Modeling and control of unified power flow controller for transient stability
202
Modeling and control of V/f controlled induction motor using genetic-ANFIS algorithm
203
Modeling and Control of Vinyl Chloride in Drinking Water Distribution Systems
204
Modeling and Control of Water Level in Boiler Drum for Nassiriyah Thermal Power Plant
205
Modeling and Control of Welding Flexible Manufacturing Cell Using Petri Net
206
MODELING AND CONTROL OF WIND TURBINE AND FAULT
207
Modeling and control tuning of a hydro station with units sharing a common penstock section
208
Modeling and controllability for a class of hybrid mechanical systems
209
Modeling and Controller Design for a Coupled-Tank Liquid Level System: Analysis and Comparison
210
Modeling and controller design for complex flexible nonlinear systems via a fuzzy singularly perturbed approach
211
Modeling and controller design of a Maglev guiding system for application in precision positioning
212
Modeling and controller design of inner-formation flying system with two proof-masses
213
Modeling and controller performance assessment for a switched reluctance motor drive based on setpoint relay
214
Modeling and controllers design of the China CLEAR-IB
215
Modeling and controlling clarifier–thickeners fed by suspensions with time-dependent properties
216
Modeling and controlling variation propagation in mechanical assemblies using state transition models
217
Modeling and coordinate control of photovoltaic DC building module based BIPV system
218
Modeling and copying human head movements
219
Modeling and correction of soil penetration resistance for varying soil water content
220
Modeling and co-simulation of a parabolic trough solar plant for industrial process heat
221
Modeling and Cost Minimization of Weight Reduction Process of a Polyethylene Terephthalate Fabric by Sodium Hydroxide
222
Modeling and coupling of soil respiration and soil water content in fenced Leymus chinensis steppe, Inner Mongolia
223
Modeling and coupling of soil respiration and soil water content in fenced Leymus chinensis steppe, Inner Mongolia
224
Modeling and cycling control of carbonate fuel cell power plants
225
Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact
226
Modeling and data analysis of a Forbush decrease Original Research Article
227
Modeling and decoding motor cortical activity using a switching Kalman filter
228
Modeling and deformation analyzing of InSb focal plane arrays detector under thermal shock
229
Modeling and deformation characteristics of a circular beam with asymmetric piezoelectric actuators
230
Modeling and design considerations of a photovoltaic energy source feeding a synchronous reluctance motor suitable for pumping systems
231
Modeling and design for electrical performance of wideband flip-chip transition
232
Modeling and Design of a Disk-Type Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini)
233
Modeling and Design of a DiskType Furrow Opener’s Coulter Its Mechanical Analysis and Study for No-Till Machinery (Combination and Bertini)
234
Modeling and design of a fully integrated gas analyzer using a μGC and NEMS sensors
235
Modeling and design of a solar thermal system for hybrid cooking application
236
Modeling and Design of Controllers for Switched Reluctance Motor Based on Asymmetrical -Source Inverters
237
Modeling and Design of DC Boost and AC Side Voltage Controllers in Asymmetrical ?-Source Inverter.
238
Modeling and design of global logistics systems: A review of integrated strategic and tactical models and design algorithms
239
Modeling and design of hydrogen gas sensors based on a membrane-supported surface plasmon waveguide
240
Modeling and design of multi-layered and graded materials
241
Modeling and design of phase shift anti-islanding method using non-detection zone
242
Modeling and design of tape transport mechanism Original Research Article
243
MODELING AND DESIGN OF THERMAL POWER PLANTS USING CONCENTRATED SOLAR POWER SYSTEMS
244
Modeling and design of ultraviolet reactors for disinfection by-product precursor removal Original Research Article
245
Modeling and designing heating and ventilation system with underfloor air distribution
246
Modeling and Designing Indices of Talent Identification in the Field of Basketball Based on Physical‑Motor, Psychological, Anthropometric, and Physiological Parameters
247
Modeling and detecting the stator winding fault of permanent magnet synchronous motors
248
Modeling and detection of damage using smeared crack model
249
Modeling and detection of demagnetization fault in permanent magnet vernier machine using flexible magnetic equivalent circuit method
250
Modeling and determination of heat transfer coefficient in a basin solar still using CFD Original Research Article
251
Modeling and determination of relationship between kernel yield and its related traits in maize inbred lines and their hybrids using multiple regression and path coefficient analysis
252
Modeling and development of a decision support system for supplier selection in the process industry
253
Modeling and development of an ANN-based smart pressure sensor in a dynamic environment
254
Modeling and development of an ANN-based smart pressure sensor in a dynamic environment
255
Modeling and direct simulation of near-field granular flows
256
Modeling and discretization errors in hyperelasto-(visco-)plasticity with a view to hierarchical modeling Original Research Article
257
Modeling and discretization errors in large eddy simulations of hydrodynamic and magnetohydrodynamic channel flows
258
Modeling and distributed gain scheduling strategy for load frequency control in smart grids with communication topology changes
259
Modeling and dose calculations of a pure beta emitting 32P coated stent for intracoronary brachytherapy by Monte Carlo code
260
Modeling and dynamic analysis of a planetary mechanism with an elastic belt
261
Modeling and dynamic assessment of urban economy–resource–environment system with a coupled system dynamics – geographic information system model
262
Modeling and dynamic characteristics analysis on a three-stage fast-response and large-flow directional valve
263
Modeling and dynamic characteristics of spinning Rayleigh beams
264
Modeling and dynamic characteristics of spinning Rayleigh beams
265
Modeling and dynamic control simulation of unitary gas engine heat pump
266
Modeling and Dynamic Properties of a Four-Parameter Zener Model Vibration Isolator
267
Modeling and dynamic simulation of ultraviolet induced growing interfaces
268
Modeling and dynamic simulation of ultraviolet induced growing interfaces
269
Modeling and dynamical analysis of a COVID-19 epidemic model with time-delay
270
Modeling and dynamics analysis of shells of revolution by partially active constrained layer damping treatment
271
Modeling and dynamics of an autothermal JP5 fuel reformer for marine fuel cell applications
272
Modeling and Economic Analysis of MED-TVC Desalination with Allam Power Plant Cycle in Kish Island
273
Modeling and economic evaluation of the integration of carbon capture and storage technologies into coal to liquids plants
274
Modeling and effect of leakages on heat transfer performance of fixed matrix regenerators
275
Modeling and Efficient Control of Microturbine Generation System With Battery Energy Storage for Sensitive Loads
276
Modeling and efficient optimization for object-based scalability and some related problems
277
Modeling and Elimination of Atenolol on Granular Activated Carbon in Fixed Bed Column
278
Modeling and energy efficiency optimization of belt conveyors
279
Modeling and environmental risk assessment of Eastern Alborz Coal washing plant
280
Modeling and Estimating the COVID-19 Incidence and Fatality in Europe
281
Modeling and estimating the jump risk of exchange rates: Applications to RMB
282
Modeling and estimation of ambiguities in linear arrays
283
Modeling and Estimation of Banana Slice Browning during Drying using Artificial Neural Network.
284
Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite
285
Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite
286
Modeling and estimation of deformation behavior of particle-reinforced metal–matrix composite
287
Modeling and estimation of rheological properties of food products for manufacturing simulations Original Research Article
288
Modeling and estimation of the cardiac electromechanical activity
289
Modeling and estimation of the natural gas consumption for residential and commercial sectors in Iran
290
Modeling and Estimation Problems for Structured Heterogeneous Populations
291
Modeling and evaluating ecosystem in 1980s and 1990s for American lobster (Homarus americanus) in the Gulf of Maine
292
Modeling and evaluating ecosystem in 1980s and 1990s for American lobster (Homarus americanus) in the Gulf of Maine
293
Modeling and evaluating of typical advanced peer-to-peer botnet
294
Modeling and evaluating the ecosystem of sea-grass beds, shallow waters without sea-grass, and an oxygen-depleted offshore area
295
Modeling and evaluating the effect of forest fire control on the CO2 cycle in Siberia
296
Modeling and Evaluating the Energy Hub Effects on a Price Responsive Load
297
Modeling and evaluating the security threats of transient errors in firewall software
298
Modeling and evaluating the strategic effects of improvement programs on the manufacturing performance using neural networks
299
Modeling and Evaluation of a Policy Provisioning Architecture for Mobile Ad-Hoc Networks
300
Modeling and evaluation of boundary layer resistance at feed in the permeation of VOC/N2 mixtures through PDMS membrane
301
Modeling and evaluation of curved layer fused deposition
302
Modeling and evaluation of information systems using coloured petri network
303
Modeling and Evaluation of Stochastic Discrete-Event Systems with RayLang Formalism
304
Modeling and evaluation of the environmental consequences of fire in atmospheric storage tanks using PHAST software
305
Modeling and evaluation of the filling stage of injection/compression moulding
306
Modeling and evaluation of the filling stage of injection/compression moulding
307
Modeling and evaluation of the indoor power line transmission medium
308
Modeling and evaluation of trust with an extension in semantic web
309
Modeling and Evaluation of Web Services in Mobile Networks Using Stochastic Colored Petri Nets
310
Modeling and Evolutionary Optimization on Multilevel Production Scheduling: A Case Study
311
Modeling and experiment of shuttling speed effects on the OSTRYCH
312
Modeling and experimental analysis of a self-excited six-phase induction generator for stand-alone renewable energy generation
313
Modeling and experimental analysis of polydispersed particles coating in spouted bed
314
Modeling and experimental assessment of Nafion membrane properties used in SO2 depolarized water electrolysis for hydrogen production
315
Modeling and experimental characterization of peak tailing in DNA gel electrophoresis
316
Modeling and Experimental Design for Metabolic Flux Analysis of Lysine-Producing Corynebacteria by Mass Spectrometry
317
Modeling and experimental evaluation of an automotive air conditioning system with a variable capacity compressor
318
Modeling and Experimental Investigation a Solar Tray Dryer with Indirect Forced Convection using Phase Change Materials
319
Modeling and Experimental Investigation of a Variable Speed Drive Water Source Heat Pump
320
Modeling and experimental investigation of accumulators for automotive air conditioning systems
321
Modeling and Experimental Investigation of Laser Drilling with Jet Electrochemical Machining
322
Modeling and experimental investigation of looped separate heat pipe as waste heat recovery facility
323
Modeling and experimental investigation on water-driven steam injector for waste heat recovery
324
Modeling and experimental observation of evaporation from oxidizing molybdenum particles entrained in a thermal plasma jet
325
Modeling and Experimental Prediction of Wastewater Treatment Efficiency in Oil Refineries Using Activated Sludge Process
326
Modeling and Experimental Studies on Pre-Loaded Reinforced Concrete Beams Strengthened by External Reinforcement
327
Modeling and experimental studies on single particle coal devolatilization and residual char combustion in fluidized bed
328
Modeling and experimental study of birefringence in injection molding of semicrystalline polymers
329
Modeling and experimental study of CO2 absorption in a hollow fiber membrane contactor
330
Modeling and experimental study of grinding forces in surface grinding
331
Modeling and experimental study of microfiltration using a composite module
332
Modeling and experimental study of nucleate boiling on a vertical array of horizontal plain tubes
333
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process
334
Modeling and Experimental Study of Static Recovery and Mechanical Behavior of AA5052 Alloy During Cold-Working and Subsequent Annealing
335
Modeling and experimental study of the 27-day variation of galactic cosmic-ray intensity for a solar wind velocity depending on heliolongitude Original Research Article
336
Modeling and experimental study of vapor phase-diffusion driven sessile drop evaporation
337
Modeling and experimental study on an innovative passive cooling system—NVP system
338
Modeling and experimental study on multi-level humidifying of the underfeed circulating spouted bed for flue gas desulfurization
339
Modeling and experimental study on performance of inverter air conditioner with variation of capillary tube using R-22 and R-407C
340
Modeling and experimental study on sensing response of an AlGaN/GaN HEMT-based hydrogen sensor
341
Modeling and experimental study on the performance of an inverter air conditioner using R-410A with evaporatively cooled condenser
342
Modeling and experimental study on the sealing gasket of proton exchange membrane fuel cells
343
Modeling and Experimental Testing of Asymmetric Information Problems in Lease and Hire Contracts: A Study Based on Contract Theory
344
Modeling and experimental testing of the effect of solvent absorption on the electric properties of styrene butadiene rubber/carbon black chemical sensors
345
Modeling and Experimental Validation for Hammer-Driven Type Penetrators under Horizontal Condition
346
Modeling and experimental validation of a 1.2 MW DC transferred well-type plasma torch Original Research Article
347
Modeling and experimental validation of a greenhouse with evaporative cooling by moving water film over external shade cloth
348
Modeling and experimental validation of H2 gas bubble humidifier for a 50 kW stationary PEMFC system
349
Modeling and experimental validation of internal faults in salient pole synchronous machines including space harmonics Original Research Article
350
Modeling and experimental validation of mass transfer from carbonated beverages in polyethylene terephthalate bottles Original Research Article
351
Modeling and experimental validation of overpotentials of a direct ethanol fuel cell
352
Modeling and experimental validation of sharpening mechanism based on thermal oxidation for fabrication of ultra-sharp silicon nanotips
353
Modeling and experimental validation of solid oxide fuel cell materials and stacks
354
Modeling and experimental validation of the desiccant wheel in a hybrid desiccant air conditioning system
355
Modeling and experimental validation of the dispersion of 222Rn released from a uranium mine ventilation shaft
356
Modeling and experimental validation of the solar loop for absorption solar cooling system using double-glazed collectors
357
Modeling and experimental validation of trabecular bone damage, softening and densification under large compressive strains
358
Modeling and experimental validation of unsteady impinging flames
359
Modeling and experimental verification of dielectric constants for three-dimensional woven composites
360
Modeling and Experimental Verification of Grid Interaction of a DFIG Wind Turbine
361
Modeling and experimental verification of martensitic transformation plastic behavior in carbon steel for quenching process
362
Modeling and experimental verification of partial slip for multiple frictional contact problems
363
Modeling and experimental verification of simultaneous tension and torsion in a cylindrical element with a surface layer
364
Modeling and experimental verification of the 300 mm Ar anneal process
365
Modeling and experimental verification of the kinetics of reacting polymer systems
366
Modeling and experimental verification of the performance of TIRF-sensing systems for oligonucleotide microarrays based on bulk and integrated optical planar waveguides
367
Modeling and experimental verification of thermo-mechanical coupled behavior of face-centered-cubic polycrystals
368
MODELING AND EXPERIMENTAL WORK OF LECTROCHEMICAL TURNING PROCESS
369
Modeling and experimenting combined smart sleep and power scaling algorithms in energy-aware data center networks
370
Modeling and experiments in plasticity
371
Modeling and experiments on energy loss in horizontal connecting pipe of vertical ground source heat pump system
372
Modeling and experiments on the indentation deformation and recrystallization of a single-crystal nickel-base superalloy
373
Modeling and experiments on the influence of biofilm size and mass transfer in a fluidized bed reactor for anaerobic digestion
374
MODELING AND EXPERT EVALUATION OF SHAPING DURING ROLLING OF A WIDE RANGE OF ALLOY STEELS
375
Modeling and Exploring Multivariate Spatial Variation: A Test Procedure for Isotropy of Multivariate Spatial Data
376
Modeling and fabrication of micro tools by pulsed electrochemical machining
377
Modeling and fault diagnosis of a photovoltaic system
378
Modeling and FE analysis of column to beam end-plate bolted connection
379
Modeling and Finite Difference Numerical Analysis of Reaction-Diffusion Dynamics in a Microreactor
380
Modeling and finite element analysis on GTAW arc and weld pool
381
Modeling and flowsheet simulation of continuous fluidized bed dryers
382
Modeling and forecasting cointegrated relationships among heavy oil and product prices
383
Modeling and forecasting crude oil markets using ARCH-type models
384
Modeling and Forecasting Electricity Prices with Input/Output Hidden Markov Models .
385
Modeling and forecasting extreme hot events in the central Ebro valley, a continental-Mediterranean area
386
Modeling and forecasting from trend-stationary long memory models with applications to climatology
387
Modeling and forecasting industrial end-use natural gas consumption
388
Modeling and forecasting MODIS-based Fire Potential Index on a pixel basis using time series models
389
Modeling and forecasting monthly movement of annual average solar insolation based on the least-squares Fourier-model
390
Modeling and forecasting natural gas demand in Bangladesh
391
Modeling and Forecasting of Bohai Sea Ice
392
Modeling and forecasting of electrical power demands for capacity planning
393
MODELING AND FORECASTING OF ENERGY SCENARIO IN PAKISTAN WITH APPLICATION OF DECENTRALIZED ENERGY PLANNING
394
Modeling and Forecasting of Food Imports in Albania
395
Modeling and Forecasting of Paraffin Settings on an Existing Extractive Fund of Oil Deposits
396
Modeling and forecasting of Turkey’s energy consumption using socio-economic and demographic variables
397
Modeling and forecasting petroleum futures volatility
398
Modeling and Forecasting Primary Commodity Prices, W. Labys. Ashgate Publishing Co., Burlington VT (2006). US $99.95, 235pp., ISBN-13 978-0-7546-4629-7.
399
Modeling and forecasting river flow rate from the Melen Watershed, Turkey
400
Modeling and Forecasting the Electricity Price in Iran Using Wavelet-based GARCH Model
401
Modeling and forecasting tourism demand for arrivals with stochastic nonstationary seasonality and intervention
402
Modeling and forecasting tourist traffic in the Maua and Alba Posse Harbors
403
Modeling and forecasting trend of COVID-19 epidemic in Iran until May 13, 2020
404
Modeling and forecasting U.S. Patent application filings
405
Modeling and forecasting US presidential election using learning algorithms
406
Modeling and Forecasting Volatility of the Malaysian and the Singaporean Stock Indices using Asymmetric GARCH Models and Non-normal Densities
407
Modeling and Formal Verification of IMPP
408
Modeling and Fuzzy Control Strategy Design for the Hydraulic Hybrid Refuse Truck
409
Modeling and generating context-aware agent-based applications with amended colored Petri nets
410
Modeling and generating parallel flexure elements
411
Modeling and generating realistic streaming media server workloads
412
Modeling and genetic algorithm-based multi-objective optimization of the MED-TVC desalination system Original Research Article
413
Modeling and H/sub (infinity)/ control for switched linear parameter-varying missile autopilot
414
Modeling and harmonic suppression for power distribution systems
415
Modeling and heuristics for scheduling of distributed job shops
416
Modeling and Hierarchical Neuro-Fuzzy Control for Flexure-Based Micropositioning Systems
417
Modeling and high-precision control of a ball-screw-driven stage
418
Modeling and Hybrid Pareto Optimization of Cyclone Separators Using Group Method of Data Handling (GMDH) and Particle Swarm Optimization (PSO)
419
Modeling and Identification Based On CAN Network Information in Iranian Cars
420
Modeling and identification of an arbitrarily shaped scatterer using dynamic XFEM with cubic splines
421
Modeling and identification of an electromechanical internal combustion engine throttle body
422
Modeling and identification of an electro-mechanical system: The LISA grabbing positioning and release mechanism case Original Research Article
423
Modeling and identification of an electrostatic motor
424
Modeling and Identification of an Industrial Robot for Machining Applications
425
Modeling and identification of freeplay nonlinearity
426
Modeling and identification of frictional forces at a contact interface experiencing micro-vibro-impacts
427
Modeling and identification of induction micromachines in microelectromechanical systems applications
428
Modeling and identification of solar energy water heating system incorporating nonlinearities
429
Modeling and identification of systems with backlash
430
Modeling and identification of Wiener systems with two-segment nonlinearities
431
Modeling and impact of metal accumulation in bottom sediments of wet ponds
432
Modeling and implementation of an artificial electricity market using agent-based technology
433
Modeling and implementation of the vegetable supply chain traceability system
434
Modeling and implementing a real-time scheduler for dual-armed cluster tools
435
Modeling and implementing an agent-based environmental health impact decision support system
436
Modeling and implementing an agent-based system for prediction of protein relative solvent accessibility
437
Modeling and imprint fabrication of an infrared wire-grid polarizer with an antireflection grating structure
438
Modeling and Improvement of Function of Solar Resources using Comparative Multipurpose Algorithm of PSO
439
Modeling and improvement of silicon ingot directional solidification for industrial production systems
440
Modeling and in situ identification of material parameters for layered structures based on carbon nanotube arrays
441
Modeling and inference for troubleshooting with interventions applied to a heavy truck auxiliary braking system
442
Modeling and inference for troubleshooting with interventions applied to a heavy truck auxiliary braking system
443
Modeling and Inferential Thoughts for Consecutive Gap Times Observed with Death and Censoring
444
Modeling and initial assessment of the inter-frequency clock bias for COMPASS GEO satellites Original Research Article
445
Modeling and Intelligent Control of a Robotic Gas Metal Arc Welding System
446
Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles
447
Modeling and intellligent chatter control strategies for a lathe machine
448
Modeling and interactions analysis of the novel antagonist agent flibanserin with 5-hydroxytryptamine 2A (5-HT2A) serotonin receptor as a HSDD treatment in premenopausal women
449
Modeling and interactions analysis of the novel antagonist agent flibanserin with 5-hydroxytryptamine 2A (5-HT2A) serotonin receptor as a HSDD treatment in premenopausal women
450
Modeling and interactions of Aspergillus fumigatus lanosterol 14-α demethylase `Aʹ with azole antifungals Original Research Article
451
Modeling and interpretations by the statistical physics formalism of hydrogen adsorption isotherm on LaNi4.75Fe0.25
452
Modeling and interpreting bioavailability of organic contaminant mixtures in subsurface environments Review Article
453
Modeling and interpreting the seismic-reflection expression of sandstone in an ancient mass-transport deposit dominated deep-water slope environment
454
Modeling and inverse simulation of somersaults on the trampoline
455
Modeling and Investigating Lightning Wave Transfer through Distribution Transformer to Watercraft Power System
456
Modeling and Investigating the Production of Carbon Dioxide Gas Using HSC Software in the Tile Industry
457
Modeling and Investigation of Gas Turbines Heat Recovery in the Semnan Oil Pumping Station for Heating Gas-Oil to Reduce Energy Consumption of Pumping
458
Modeling and investigation of Gulf El-Zayt wind farm for stability studying during extreme gust wind occurrence
459
Modeling and investigation of neural activity in the thalamus
460
Modeling and investigation of submerged fermentation process to produce extracellular polysaccharide using Lactobacillus confusus
461
Modeling and investigation of the channeling phenomenon in downdraft stratified gasifers
462
Modeling and investigation of the wind resource in the gulf of Tunis, Tunisia
463
Modeling and investigation start-up procedures of a combined cycle power plant
464
Modeling and investigation start-up procedures of a combined cycle power plant
465
Modeling and IPC control of interactive mechanical systems: a coordinate-free approach: Stefano Stramigioli; LNCIS 266, Springer, London, 2001, ISBN 1-85233-395-2
466
Modeling and Kinetic Determination in Affinity Precipitation of Trypsin
467
MODELING AND LAYOUT OPTIMIZATION TECHNIQUES FOR SILICON-BASED SYMMETRICAL SPIRAL INDUCTORS
468
Modeling and limits of strength of nanoporous foams
469
Modeling and linguistic knowledge extraction from systems using fuzzy relational models
470
Modeling and machining evaluation of microstructure fabrication by fast tool servo-based diamond machining
471
Modeling and magnetic measurements of TNK synchrotron radiation source magnets
472
Modeling and magnetic measurements of TNK synchrotron radiation source magnets
473
Modeling and Management of Urban Stormwater Runoff Quality: A Review
474
Modeling and managing the evolutionary component of biological systems
475
Modeling and managing the evolutionary component of biological systems
476
Modeling and managing the interactions between hydrology, ecology and economics
477
Modeling and manipulating the structure of hierarchical schemas for the web
478
Modeling and measurement approaches for electrostatic discharge in semiconductor devices and ICs: an overview
479
Modeling and measurement approaches for electrostatic discharge in semiconductor devices and ICs: an overview
480
Modeling and measurement issues have been considered the heart of information technology (IT) productivity paradox problem. By collecting data from seven mortgage firms, this research attempts to shed light on the causal relationships and complementarity
481
Modeling and measurement methodology in consumer perceptions, preference, consideration, and choice behavior
482
Modeling and measurement of aerosol deposition on a heated substrate
483
Modeling and measurement of CO2 solubility in salty aqueous solutions and application in the Erdos Basin
484
Modeling and measurement of flow effects on tracheal sounds
485
Modeling and measurement of granule attrition during pneumatic conveying in a laboratory scale system
486
Modeling and measurement of interfacial area concentration in two-phase flow Original Research Article
487
Modeling and measurement of temperature sensitivity in birefringent photonic crystal holey fibers
488
Modeling and measurement of the wavelength-dependent output properties of quantum-well optical amplifiers: effects of a carrier-dependent escape time
489
Modeling and measurements of a 16-kW turbulent nonadiabatic syngas diffusion flame in a cooled cylindrical combustion chamber
490
Modeling and measurements of solid–liquid and vapor–liquid equilibria of polyols and carbohydrates in aqueous solution Original Research Article
491
Modeling and measurements of soot and species in a laminar diffusion flame
492
Modeling and measurements of the radiative characteristics of high-power (alpha)-DFB lasers
493
Modeling and measurements of water–vapor flow and icing at low pressures with application to pharmaceutical freeze-drying
494
Modeling and measuring double-frequency jitter in one-way master–slave networks
495
Modeling and measuring product development cycle time across industries
496
Modeling and Measuring Productivity in the Agri-Food Sector: Trends, Causes
497
Modeling and measuring the effects of disturbance history and climate on carbon and water budgets in evergreen needleleaf forests
498
Modeling and measuring the effects of imprecision in accident management
499
Modeling and measuring the indoor radon concentrations in high-rise buildings in Hong Kong
500
Modeling and measuring the spatial relation “along”: Regions, contours and fuzzy sets
501
Modeling and mechanical performance of carbon nanotube/epoxy resin composites
502
Modeling and mechanism of the adsorption of copper ion onto natural bamboo sawdust
503
Modeling and mechanism of the adsorption of proton onto natural bamboo sawdust
504
Modeling and microstructural analysis of temperature effects in fused silica viewport
505
Modeling and microstructural characterization of incubation, time-dependent drift and saturation during electromigration in AI-Si-Cu stripes
506
Modeling and microstructural characterization of incubation, time-dependent drift and saturation during electromigration in AI-Si-Cu stripes
507
Modeling and Minimization of Extinction in Volterra–Lotka Type Equations with Free Boundaries
508
Modeling and minimizing process time of combined convective and vacuum drying of mushrooms and parsley Original Research Article
509
Modeling and mining of dynamic trust in complex service-oriented systems
510
Modeling and mitigation of pad scratching in chemical–mechanical polishing
511
Modeling and Model Predictive Control of Composition and Conversion in an ETBE Reactive Distillation Column
512
Modeling and modification of the parallel plate variable MEMS capacitors considering deformation issue
513
Modeling and monitoring for handling nonlinear dynamic processes
514
Modeling and monitoring of construction supply chains
515
Modeling and monitoring of E-commerce workflows
516
Modeling and monitoring of long-term acidification in an upland catchment of the Western Ore Mountains, SE Germany
517
Modeling and monitoring of suspended particulate matter from Badarpur thermal power station, Delhi
518
Modeling and monitoring of the acclimatization of conventional activated sludge to a biohydrogen producing culture by biokinetic control
519
Modeling and Monitoring Social Ntwork in term of Longitudinal Data
520
Modeling and Monitoring Social Ntwork in term of Longitudinal Data
521
Modeling and Monte Carlo simulation of TCDD transport in a river
522
MODELING AND MULTI-OBJECTIVE DESIGN OPTIMIZATION OF QUASI-CONTINUOUS HIGH MAGNETIC FIELD SYSTEMS
523
Modeling and multi-objective exergy based optimization of a combined cycle power plant using a genetic algorithm
524
Modeling and multi-objective optimization of low-frequency vibration-assisted chemical machining using central composite design in response surface methodology
525
Modeling and Multi-Objective Optimization of Operating Parameters in Semi Autogenous Grinding Mill
526
Modeling and multi-objective optimization of parallel flow condenser using evolutionary algorithm
527
MODELING AND MULTI-OBJECTIVE OPTIMIZATION OF STALL CONTROL ON NACA0015 AIRFOIL WITH A SYNTHETIC JET USING GMDH TYPE NEURAL NETWORKS AND GENETIC ALGORITHMS
528
Modeling and multi-response optimization of Inconel 718 on machining of CNC WEDM process
529
Modeling and multivariable active disturbance rejection control of a hydraulic looper multivariable system
530
Modeling and Neuro-fuzzy Controller Design of a Wind Turbine in Full-load Region Based on Operational Data
531
Modeling and nonlinear control of magnetic levitation systems
532
Modeling and nonlinear hunting stability analysis of high-speed railway vehicle moving on curved tracks
533
Modeling and nonlinear parameter estimation with Kronecker product representation for coupled oscillators and spatiotemporal systems
534
Modeling and Non-modeling Genre-based Approach to Writing Argument-led Introduction Paragraphs: A Case of English Students in Iran
535
Modeling and Numerical Analysis in 3D of Anisotropic and Nonlinear Mechanical Behavior of Tournemire Argillite under High Temperatures and Dynamic Loading
536
Modeling and numerical analysis of counter-current dialyzer at steady state
537
Modeling and numerical analysis of fractional-order Bloch equations
538
Modeling and numerical analysis of granite rock specimen under mechanical loading and fire
539
Modeling and Numerical Analysis of Revenue Sharing Contract Based on the Stackelberge Game Theory
540
Modeling and numerical approximation of a 2.5D set of equations for mesoscale atmospheric processes
541
Modeling and numerical investigation of erosion rate for turbulent two-phase gas–solid flow in horizontal pipes
542
Modeling and numerical issues in hyperelasto-plasticity with anisotropy
543
Modeling and Numerical Prediction on Mechanical Behaviors of Hybrid Fiber Reinforced Polymer Bio Composites Using Fuzzy Logic Algorithm
544
Modeling and Numerical Simulation of a Brushless Permanent-Magnet DC Motor in Dynamic Conditions by Time-Stepping Technique
545
Modeling and numerical simulation of bioheat transfer and biomechanics in soft tissue
546
Modeling and numerical simulation of biotin carboxylase kinetics: Implications for half-sites reactivity
547
Modeling and numerical simulation of linear and nonlinear spacecraft attitude dynamics and gravity gradient moments: A comparative study
548
Modeling and numerical simulation of oscillatory two-phase flows, with application to boiling water nuclear reactors Original Research Article
549
Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach
550
Modeling and numerical simulation of residual stresses and birefringence in injection molded center-gated disks
551
Modeling and numerical simulation of solar chimney power plants
552
Modeling and numerical simulation of the mechanical behavior of woven SiC/SiC regarding a three-dimensional unit cell
553
Modeling and Numerical Solution of the Fate of Multi-component Substrate in Porous Media
554
Modeling and numerical study of actuator and sensor effects for a laminated piezoelectric plate
555
Modeling and numerical treatment of elastic rods with frictionless self-contact
556
Modeling and observations of the north–south ionospheric asymmetry at low latitudes at long deep solar minimum Original Research Article
557
Modeling and online parameter estimation of intake manifold in gasoline engines using sliding mode observer
558
Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor
559
Modeling and Optimal Active Control with Delay of the Dynamics of a Strongly Nonlinear Beam
560
Modeling and Optimal Control of 4 Wheel Steering Vehicle Using LQR and its Comparison with 2 Wheel Steering Vehicle
561
Modeling and Optimal Control of a 3-Axis Motion Simulator
562
Modeling and optimal control of a nonlinear dynamical system in microbial fed-batch fermentation
563
Modeling and Optimal Control of a Sport Utility Cable Suspended Robot
564
Modeling and Optimal Control of Batch Processes Using Recurrent Neuro-Fuzzy Networks
565
Modeling and optimal controllers design for a stand-alone photovoltaic-diesel generating unit
566
Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System
567
Modeling and optimal design of cyclic processes for hydrogen purification using hydride-forming metals
568
Modeling and optimal design of evaporative cooling system in controlled environment greenhouse
569
Modeling and optimal design of ground air collector for heating in controlled environment greenhouse
570
Modeling and Optimization for Disassembly Planning
571
Modeling and optimization for microstructural properties of Al/SiC nanocomposite by artificial neural network and genetic algorithm
572
Modeling and Optimization for Piercing Energy Consumption Original Research Article
573
Modeling and optimization for the secondary reaction of FCC gasoline based on the fuzzy neural network and genetic algorithm
574
Modeling and optimization I: Usability of response surface methodology Original Research Article
575
Modeling and optimization II: Comparison of estimation capabilities of response surface methodology with artificial neural networks in a biochemical reaction Original Research Article
576
Modeling and optimization III: Reaction rate estimation using artificial neural network (ANN) without a kinetic model Original Research Article
577
Modeling and Optimization in Early Detection Programs with a Single Exam
578
Modeling and Optimization in VSC-HVDC Transmission Lines in Chemical Industry, A review
579
Modeling and optimization IV: Investigation of reaction kinetics and kinetic constants using a program in which artificial neural network (ANN) was integrated Original Research Article
580
Modeling and optimization of a 1 kWe HT-PEMFC-based micro-CHP residential system
581
Modeling and optimization of a fluidized catalytic cracking process under full and partial combustion modes
582
Modeling and optimization of a hybrid system for the energy supply of a “Green” building
583
Modeling and optimization of a multi-product biosynthesis factory for multiple objectives
584
Modeling and optimization of a non-isothermal two phase flow in the cathode gas diffusion layer of PEM fuel cell
585
Modeling and optimization of a nuclear power plant secondary loop Original Research Article
586
Modeling and optimization of a propeller-type tribocharger for granular materials
587
Modeling and Optimization of a Semi Regenerative Catalytic Reforming of Naphtha in the Presence of Catalyst Coking
588
Modeling and optimization of a sequence of chemical cleaning cycles in dead-end ultrafiltration
589
Modeling and optimization of a solar assisted heat pump using ice slurry as a latent storage material
590
Modeling and optimization of a thermoplastic composites stamping process
591
Modeling and Optimization of a Tri-objective Transportation-Location-Routing Problem considering route reliability: using MOGWO, MOPSO, MOWCA, and NSGA-II
592
Modeling and Optimization of Aloe-Vera Static Shearing by Response Surface Methodology (RSM) and Artificial Neural Network (ANN) Methods
593
Modeling and optimization of an energy generation island based on renewable technologies and hydrogen storage systems
594
Modeling and optimization of an industrial hydrocracker plant
595
Modeling and optimization of an industrial hydrocracking unit to improve the yield of diesel or kerosene
596
Modeling and optimization of an oversaturated signalized network
597
Modeling and Optimization of Anethole Ultrasound-Assisted Extraction from Fennel Seeds using Artificial Neural Network
598
Modeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology Document Type : Original Research Paper
599
Modeling and Optimization of B-Cyclodextrin Production by Bacillus
600
Modeling and optimization of catalytic partial oxidation methane reforming for fuel cells
601
Modeling and Optimization of Charge Materials Ranges in Converter Furnace with Enhanced Passivation Time in Copper Electrorefining Process: A Mixture Design Approach
602
Modeling and Optimization of Colloidal Nanosilver Pretreatment on Acid-Free Dyeing, Antibacterial, and Hydrophilicity of Polyamide-6,6 Using Response Surface Methodology
603
Modeling and optimization of combined cytostatic and cytotoxic cancer chemotherapy
604
Modeling and optimization of cross-flow ultrafiltration using hybrid neural network-genetic algorithm approach
605
Modeling and optimization of degree of folate grafted on chitosan and carboxymethyl-chitosan
606
Modeling and optimization of designing parameters for a parallel-plain fin heat sink with confined impinging jet using the response surface methodology
607
Modeling and Optimization of Diesel-Natural Gas RCCI Engine Performance, Combustion Noise and Emissions using Response Surface Method
608
Modeling and Optimization of Different Acid Gas Enrichment Structures via Coupling of Response Surface Method with Genetic Algorithm
609
Modeling and Optimization of Electrocoagulation Processfor the Removal of Yellow145 dye Based on CentralComposite Design
610
Modeling and optimization of electron linac exit systems for nuclear technologies
611
Modeling and optimization of electron linac exit systems for nuclear technologies
612
Modeling and optimization of energy consumption and performance characteristics of a solar assisted fluidized bed dryer
613
Modeling and Optimization of Energy Inputs and Greenhouse Gas Emissions for Eggplant Production Using Artificial Neural Network and MultiObjective Genetic Algorithm
614
Modeling and optimization of existing beam port facility of PSBR
615
Modeling and optimization of fermentative hydrogen production
616
Modeling and optimization of Fischer–Tropsch products hydrocracking
617
Modeling and optimization of Fischer–Tropsch synthesis in the presence of Co (III)/Al2O3 catalyst using artificial neural networks and genetic algorithm
618
Modeling and Optimization of Fixed-Bed Fischer-Tropsch Synthesis Using Genetic Algorithm
619
Modeling and Optimization of Flux Assisted Tungsten Inert Gas Welding Process Using Taguchi Method and Statistical Analysis
620
Modeling and optimization of foam-filled thin-walled columns for crashworthiness designs
621
Modeling and optimization of friction stir welding parameters in joining 5086 H32 aluminium alloy.
622
Modeling and optimization of high chromium alloy wear in phosphate laboratory grinding mill with fuzzy logic and particle swarm optimization technique
623
Modeling and optimization of hollow fiber DCMD module for desalination
624
Modeling and optimization of HVAC energy consumption
625
Modeling and Optimization of Hybrid HIR Drying Variables for Processing of Parboiled Paddy Using Response Surface Methodology
626
Modeling and optimization of hybrid solar thermoelectric systems with thermosyphons
627
Modeling and optimization of hybrid wind–solar-powered reverse osmosis water desalination system in Saudi Arabia
628
Modeling and optimizatıon of hydrocyclone processıng of low grade bentonites
629
Modeling and Optimization of Industrial Multi-Stage Compressed Air System Using Actual Variable Effectiveness in Hot Regions
630
Modeling and optimization of InGaAs infrared photovoltaic detectors
631
Modeling and optimization of InGaAs infrared photovoltaic detectors
632
Modeling and optimization of ITO/Al/ITO multilayer films characteristics using neural network and genetic algorithm
633
Modeling and optimization of laser direct structuring process using artificial neural network and response surface methodology
634
Modeling and optimization of lipase-catalyzed synthesis of phytosteryl esters of oleic acid by response surface methodology
635
Modeling and Optimization of Mass and Spring Based Vibration String Using Modal Analysis and Imperialist Competition Optimization Algorithm Methods
636
Modeling and optimization of mechanical behavior of bonded composite–steel single lap joints by response surface methodology
637
Modeling and Optimization of Mechanical Properties of PA6/NBR/Graphene Nanocomposite Using Central Composite Design
638
Modeling and optimization of membrane lifetime in dead-end ultra filtration
639
Modeling and optimization of microwave devices and circuits using genetic algorithms
640
Modeling and optimization of Multi-Gravity Separator to produce celestite concentrate
641
Modeling and optimization of multi-tubular metal hydride beds for efficient hydrogen storage
642
Modeling and Optimization of Nano-bubble Generation Process Using Response Surface Methodology
643
Modeling and optimization of Nitrate and total Iron removal from wastewater by TiO2/SiO2 nanocomposites
644
Modeling and optimization of oil refinery wastewater chemical oxygen demand removal in dissolved air flotation system by response surface methodology
645
Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design
646
Modeling and optimization of photocatalytic/photoassisted-electro-Fenton like degradation of phenol using a neural network coupled with genetic algorithm
647
Modeling and optimization of polygeneration energy systems
648
Modeling and Optimization of Precipitation Hardening Heat Treatment Factors of the Al2024 Alloy Using a Two-Level Full Factorial Design
649
Modeling and optimization of preparative reversed-phase liquid chromatography for insulin purification
650
MODELING AND OPTIMIZATION OF PROCESS PARAMETERS USING NEURAL NETWORKS AND SIMULATED ANNEALING ALGORITHM FOR ELECTRICAL DISCHARGE MACHINING OF AISI2312 HOT WORKED STEEL
651
Modeling and Optimization of Product Appearance: Application to Injection-Molded Plastic Panels
652
Modeling and optimization of Q-switched double-clad fiber lasers
653
Modeling and optimization of resonant cavity enhanced-separated absorption graded charge multiplication-avalanche photodetector (RCE-SAGCM-APD)
654
Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm
655
Modeling and optimization of short Er/sup 3+/-Yb/sup 3+/ codoped fiber lasers
656
Modeling and optimization of solar thermoelectric generators for terrestrial applications
657
Modeling and optimization of spiral concentrator for separation of ultrafine chromite
658
Modeling and optimization of stencil printing operations: A comparison study
659
Modeling and optimization of supercritical fluid processes
660
Modeling and optimization of surface quality of copper deposits recovered from brass scrap by direct electrowinning
661
Modeling and Optimization of Surface Roughness of AISI2312 Hot Worked Steel in EDM based on Mathematical Modeling and Genetic Algorithm
662
Modeling and optimization of sweeping gas membrane distillation Original Research Article
663
Modeling and optimization of synergistic effect of Cyanex 302 and D2EHPA on separation of zinc and manganese
664
Modeling and optimization of the air system in polymer exchange membrane fuel cell systems
665
Modeling and optimization of the bi-substrate peroxidase-enzyme catalyzed potentiometric assay of hydrogen peroxide by response surface methodology with a central composite rotatable design
666
Modeling and Optimization of the Coagulation–Flocculation Process in Turbidity Removal from Aqueous Solutions Using Rice Starch
667
Modeling and optimization of the combined carbon dioxide reforming and partial oxidation of natural gas Original Research Article
668
Modeling and Optimization of the Condensing Steam Turbine Network of a Chemical Plant
669
Modeling and optimization of the dilute-sulfuric-acid pretreatment of corn stover, poplar and switchgrass
670
Modeling and Optimization of the Drug Extraction Production Process
671
Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm
672
Modeling and Optimization of the Electrochemical Process for Cefixime Removal from Water
673
Modeling and optimization of the growth rate for ZnO thin films using neural networks and genetic algorithms
674
Modeling and Optimization of the Magnetohydrodynamic Conduction Pump by Particle Swarm Method
675
Modeling and optimization of the mixed reforming of methane: Maximizing CO2 utilization for non-equilibrated reaction
676
Modeling and optimization of the molten salt cleaning process
677
Modeling and optimization of the moving granular bed for combined hot gas desulfurization and dust removal
678
Modeling and optimization of the multi-objective single-buyer multi-vendor integrated inventory problem with multiple quantity discounts
679
Modeling and optimization of the NOx emission characteristics of a tangentially fired boiler with artificial neural networks
680
Modeling and optimization of the sequential brakeforming processes
681
Modeling and optimization of the supercritical wood impregnation process—Focus on pressure and temperature
682
Modeling and optimization of threading process for shape control in tandem cold rolling
683
Modeling and Optimization of Transmission Schemes in Energy-Constrained Wireless Sensor Networks
684
Modeling and Optimization of Truck-Shovel Allocation to Mining Faces in Cement Quarry
685
Modeling and Optimization of Ultrasound Assisted Osmotic Dehydration of Cranberry Using Response Surface Methodology
686
Modeling and optimization of ultrasound-assisted extraction of polyphenolic compounds from Aronia melanocarpa by-products from filter-tea factory
687
Modeling and optimization of ultrasound-assisted extraction of polyphenolic compounds from Aronia melanocarpa by-products from filter-tea factory
688
Modeling and optimization of ultrasound-assisted extraction of polysaccharide from Cucurbita moschata
689
Modeling and Optimization of Ultrasound-Assisted Osmotic Dehydration with Finished Freeze Drying on Black Cherries – The Effect on Antioxidant Activities
690
Modeling and optimization of variable retort temperature (VRT) thermal processing using coupled neural networks and genetic algorithms Original Research Article
691
Modeling and Optimization of Vehicle Suspension Employing a Nonlinear Fluid Inerter
692
Modeling and optimization of voltage and treatment time for electrocoagulation removal of hexavalent chromium Original Research Article
693
Modeling and Optimization of Wind Turbine Driving Permanent Magnet Synchronous Generator
694
Modeling and optimization of wire electrical discharge machining of γ-TiAl in trim cutting operation
695
Modeling and optimization of wireless local area network
696
Modeling and optimization of zone-based registration considering cell-by-cell location area for mobile communication networks
697
Modeling and optimization process parameters of acid activation of bentonite by response surface methodology
698
MODELING AND OPTIMIZATION RESEARCH FOR DYNAMIC TRANSMISSION PROCESS OF BALISE TELE-POWERING SIGNAL IN HIGH-SPEED RAILWAYS
699
Modeling and optimization studies for a sequential flow based bio-analytical system
700
Modeling and optimization study by response surface methodology on magnesium ions removal from hard water through a biosorbent
701
Modeling and optimization study of industrial n-type high-efficiency back-contact back-junction silicon solar cells
702
Modeling and Optimization: Isomerization Reaction Rate using Response Surface Methodology with Two Kinetic Model Over Bi-Porous Catalysts
703
Modeling and optimizing a sub-centralized LED lamps provision system for rural communities
704
Modeling and optimizing a vendor managed replenishment system using machine learning and genetic algorithms
705
Modeling and Optimizing Aluminum Hydroxide Precipitation Process in Industrial Scale; case study: Iran Alumina Plant
706
Modeling and optimizing bacterial leaching process parameters to increase copper extraction from a low-grade ore
707
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method
708
Modeling and optimizing irradiance on planar, folded, and honeycomb shapes to maximize photocatalytic air purification
709
Modeling and Optimizing Lead Ions Adsorption by Walnut Shell modified by Sepiolite from Aqueous Solution by Response Surface Methodology
710
Modeling and optimizing of electrochemical oxidation of C.I. Reactive Orange 7 on the Ti/Sb–SnO2 as anode via response surface methodology
711
Modeling and optimizing of factors affecting erosion–corrosion of AA6063–(TiC/Al2O3) hybrid composites by experimental design method
712
Modeling and optimizing of photovoltaic-wind-diesel hybrid systems for electri cation of remote villages in Iran
713
Modeling and optimizing of steam pyrolysis of dimethyl formamide by using response surface methodology coupled with Box-Behnken design
714
Modeling and optimizing of steam pyrolysis of dimethyl formamide by using response surface methodology coupled with Box-Behnken design
715
Modeling and optimizing parabolic trough solar collector systems using the least squares support vector machine method
716
Modeling and optimizing passive valve designs for the implantable Gold Micro-Shunt used in glaucoma treatment
717
Modeling and optimizing Random Walk content discovery protocol over mobile ad-hoc networks
718
Modeling and Optimizing the Charge of Electric Vehicles with Genetic Algorithm in the Presence of Renewable Energy Sources
719
MODELING AND OPTIMIZING THE CORROSIVE WEAR OF STEEL BALLS IN BALL GRINDING MILL
720
Modeling and Optimizing the Costs of Electronic Systems
721
Modeling and Optimizing the Hardness of the Melted Zone in Submerged Arc Welding Process using Taguchi Method
722
Modeling and optimizing the performance of a passive direct methanol fuel cell
723
Modeling and optimizing transportation decisions in a manufacturing supply chain
724
Modeling and optimum design of hybrid solid oxide fuel cell-gas turbine power plants
725
Modeling and output tracking of transverse flux permanent magnet machines using high gain observer and RBF Neural network
726
Modeling and parameter analysis of plasma cleaning
727
Modeling and parameter estimation of two-phase endogenous respirograms and COD measurements during aerobic digestion of biological sludge
728
Modeling and parameter identification of a maltodextrin DE 12 drying process in a convection oven
729
Modeling and parameter identification of granular plastomer conglomerate submitted to internal underpressure
730
Modeling and parameter identification of systems with multisegment piecewise-linear characteristics
731
Modeling and parameter optimization of agile beam radar tracking
732
Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming
733
Modeling and parametric studies for thermal performance of an earth to air heat exchanger integrated with a greenhouse
734
Modeling and parametric studies of the effect of inhomogeneity on fission gas release in LWR MOX fuel
735
Modeling and parametric study of a 1 kWe HT-PEMFC-based residential micro-CHP system
736
Modeling and Pareto optimization of gas cyclone separator performance using RBF type artificial neural networks and genetic algorithms
737
Modeling and passivity analysis of nonholonomic Hamiltonian systems with rheonomous affine constraints
738
Modeling and performance analyses of evaporators in frozen-food supermarket display cabinets at low temperatures
739
Modeling and performance analysis for IPv6 traffic with multiple QoS classes
740
Modeling and performance analysis for security aspects
741
Modeling and performance analysis for wireless mobile networks: a new analytical approach
742
Modeling and performance analysis of a hybrid driver model
743
Modeling and performance analysis of a solar desalination unit with double-glass cover cooling
744
Modeling and performance analysis of a solar desalination unit with double-glass cover cooling Original Research Article
745
Modeling and performance analysis of ad hoc broadcasting schemes
746
Modeling and performance analysis of networking and collaborative systems
747
Modeling and performance analysis of QoS-aware load balancing of Web-server clusters
748
Modeling and performance analysis of realizable optical queue with service differentiation capability
749
Modeling and performance analysis of resource allocation strategies for real-time services in UMTS using TIPPtool
750
Modeling and Performance Analysis of Restaurantʹs Service Delivery Process Using Colored Petri Nets
751
Modeling and Performance Characteristics of Nanofiltration by DSPM and ARX Model
752
Modeling and performance evaluation of a cellular mobile network
753
Modeling and Performance Evaluation of a Contract-based Electronic Signature Process
754
Modeling and performance evaluation of a flexure-based XY parallel micromanipulator
755
Modeling and Performance Evaluation of a full scale Petrochemical Waste water Treatment Process
756
MODELING AND PERFORMANCE EVALUATION OF DISTRIBUTED SYSTEMS WITH COORDINATOR
757
Modeling and Performance Evaluation of Energy Consumption in S-MAC Protocol Using Generalized Stochastic Petri Nets
758
Modeling and performance evaluation of ground source (geothermal) heat pump systems
759
Modeling and Performance Evaluation of Supply Chains Using Batch Deterministic and Stochastic Petri Nets
760
Modeling and performance evaluation of transport protocols for firewall control
761
Modeling and performance of a power distribution system for hybrid fiber/coax networks
762
Modeling and performance of a SRM drive with improved ride-through capability
763
Modeling and performance of a static frequency converter starting a 300 MVA synchronous machine
764
Modeling and performance of microscale thermophotovoltaic energy conversion devices
765
Modeling and performance of uncoated microcantilever-based chemical sensors
766
Modeling and Performance of Waste Tires as Media in Fixed Bed Sequence Batch Reactor
767
Modeling and performance prediction for water production in CBM wells of an Eastern India coalfield
768
Modeling and performance study of a beam microgyroscope
769
Modeling and performance study of restoration framework in WDM optical networks
770
Modeling and physical interpretation of photocatalytic oxidation efficiency in indoor air applications
771
Modeling and predicting buildingʹs energy use with artificial neural networks: Methods and results
772
Modeling and predicting emerging inference-based decisions in complex and ambiguous legal settings
773
Modeling and predicting microstructure evolution in lead/tin alloy via correlation functions and stochastic material reconstruction Original Research Article
774
Modeling and predicting non-isothermal microbial growth using general purpose software
775
Modeling and predicting of surface roughness for generating grinding gear
776
Modeling and predicting solubility of n-alkanes in water
777
Modeling and predicting spoilage of cooked, cured meat products by multivariate analysis
778
Modeling and predicting the Henryʹs law constants of methyl ketones in aqueous sodium sulfate solutions with artificial neural network
779
Modeling and Predicting the Important Properties of the PVC/Glass Fiber Composite Laminates in the Production Process by the TLBO-ANFIS Approach
780
Modeling and Predicting the Survival of Breast Cancer Patients via Deep Neural Networks and Bayesian Algorithm
781
Modeling and predicting trends of heat stress based on climate change phenomenon: A case study in a semi-arid climate
782
Modeling and prediction (correction) of partition coefficients of bile acids and their derivatives by multivariate regression methods
783
Modeling and prediction by using WHIM descriptors in QSAR studies: submitochondrial particles (SMP) as toxicity blosensors of chlorophenols
784
Modeling and prediction by using whim descriptors in QSAR studies: toxicity of heterogeneous chemicals on Daphnia magna
785
Modeling and prediction for multivariate spatial factor analysis
786
Modeling and prediction of activity coefficient ratio of electrolytes in aqueous electrolyte solution containing amino acids using artificial neural network
787
Modeling and prediction of bulk properties of open-cell carbon foam
788
Modeling and prediction of C dynamics in soil chronosequences of the critical zone observatory (CZO) Marchfeld/Austria
789
Modeling and prediction of distribution system voltage distortion caused by nonlinear residential loads
790
Modeling and prediction of driver behavior by foot gesture analysis
791
Modeling and prediction of extraction profile for microwave-assisted extraction based on absorbed microwave energy
792
Modeling and Prediction of FRP Composite Cylinder tubes Crashworthiness Characteristics
793
Modeling and prediction of geothermal reservoir temperature behavior using evolutionary design of neural networks
794
Modeling and prediction of hybrid-coded variable bit rate video sources in fuzzy logic perspectives
795
Modeling and prediction of long-term performance of solar stills
796
Modeling and prediction of molecular properties. Theory of grid-weighted holistic invariant molecular (G-WHIM) descriptors
797
Modeling and prediction of multivariate space–time random fields
798
Modeling and prediction of photolysis half-lives of polycyclic aromatic hydrocarbons in aerosols by quantum chemical descriptors
799
Modeling and prediction of surface roughness in turning operations using artificial neural network and multiple regression method
800
Modeling and Prediction of the Dynamic Behaviour of Microbeams Under Electrostatic Load
801
Modeling and prediction of the effective thermal conductivity of random open-cell porous foams
802
Modeling and prediction of time-series of monthly copper prices
803
Modeling and prediction of Turkey’s electricity consumption using Artificial Neural Networks
804
Modeling and prediction of Turkey’s electricity consumption using Support Vector Regression
805
Modeling and predictions of solid–liquid equilibria for citalopram oxalate as a representative of a solid solution forming system
806
Modeling and preparation of activated carbon for methane storage I. Modeling of activated carbon characteristics with neural networks and response surface method
807
Modeling and preparation of activated carbon for methane storage II. Neural network modeling and experimental studies of the activated carbon preparation
808
Modeling and pricing long memory in stock market volatility
809
Modeling and pricing of block flexible electricity contracts
810
Modeling and Prioritizing Ecotourism Potential in National Park and Protected Area of Sarigol with Fuzzy-AHP in GIS
811
Modeling and probabilistic design optimization of a nanofiber-enhanced composite cylinder for buckling
812
Modeling and Process Analysis of a Biomass Gasifier-Molten Carbonate Fuel Cell-Gas Turbine-Steam Turbine Cycle as a Green Hybrid Power Generator
813
Modeling and process disturbance detection of autocorrelated data Original Research Article
814
Modeling and process simulation of controlled microwave heating of foods by using of the resonance phenomenon
815
Modeling and processing of functionally graded materials for rapid prototyping
816
Modeling and Product Grade Optimization of Fischer-Tropsch Synthesis in a Slurry Reactor
817
Modeling and Production of High Strength Al Strips by Equal Channel Multi Angular Pressing Method
818
MODELING AND PROJECTION OF FISH SUPPLY AND DEMAND IN MALAYSIA, 2000-2020
819
Modeling and prospects for a solid-state quantum computer
820
Modeling and protection of a three-phase power transformer using wavelet packet transform
821
Modeling and qualitative analysis of continuous-time neural networks under pure structural variations Original Research Article
822
Modeling and quality assessment of halftoning by error diffusion
823
Modeling and querying approximate direction relations
824
Modeling and querying fuzzy spatiotemporal databases
825
Modeling and querying graphical representations of statistical data
826
Modeling and random vibration analysis of SDOF systems with asymmetric hysteresis
827
Modeling and Rating Financial Soundness Indicators of Commercial Banks Using Confirmatory Factor Analysis and TOPSIS method
828
Modeling and real time mapping of phases during GTA welding of 1005 steel
829
Modeling and real time mapping of phases during GTA welding of 1005 steel
830
Modeling and real-time cartesian impedance control of 3-DOF robotic arm in contact with the surface
831
Modeling and real-time fault identification in transformers
832
Modeling and Real-Time Prediction of Classical Swine Fever Epidemics
833
Modeling and Reasoning over Distributed Systems using Aspect-Oriented Graph Grammars
834
Modeling and Reasoning with Bayesian Networks, A. Darwiche. Cambridge (2009)
835
Modeling and recognition of cursive words with hidden Markov models
836
Modeling and reducing edge effects in laser bending
837
Modeling and reduction of shocks on electronic components within a projectile
838
Modeling and Rendering Escher-Like Impossible Scenes
839
Modeling and Rendering of Heterogeneous Granular Materials: Granite Application
840
Modeling and rendering of points with local geometry
841
Modeling and retrieving images by content
842
Modeling and Rietveld-Refinement of the Crystal Structure of Bi4Ta2O11Based on That of Bi7Ta3O18
843
Modeling and Robust Control of a 5 DOF Model for Rowing Motion by Inverse Dynamics Method
844
Modeling and robust control of worm-gear driven systems
845
Modeling and Scale-Up of Mixing- and Temperature-Sensitive Chemical Reactions
846
Modeling and Scale-up of Sitosterol Hydrogenation Process: From Laboratory Slurry Reactor to Plant Scale
847
Modeling and scaling of the impulse turbine for wave power applications
848
Modeling and scheduling a case of flexible flowshops: Total weighted tardiness minimization
849
Modeling and Scheduling No-idle Hybrid Flow Shop Problems
850
Modeling and Scheduling No-idle Hybrid Flow Shop Problems
851
Modeling and scheduling of ratio-driven FMS using unfolding time Petri nets
852
Modeling and Scheduling Optimization for Bulk Ore Blending Process Original Research Article
853
Modeling and Scheduling University Course Timetabling Problems
854
Modeling and segmentation of floating foreground and background in videos
855
Modeling and seismic response of structures with concrete rocking columns and viscous dampers
856
Modeling and sensitivity analysis of a pneumatic vibration isolation system with two air chambers
857
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000
858
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000
859
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000
860
Modeling and sensitivity analysis of fire emissions in southern Africa during SAFARI 2000*1
861
Modeling and sensitivity analysis of multibody systems using new solid, shell and beam elements Original Research Article
862
Modeling and sensitivity analysis of neural networks Original Research Article
863
Modeling and sharing geographic data with INTERLIS
864
Modeling and simulating combustion and generation of NOx
865
Modeling and simulating coverage in sensor networks
866
Modeling and Simulating Dynamics of Missiles with Deflectable Nose Control
867
Modeling and simulating motions of human bodies in a futuristic distributed tele-immersive collaboration system for synthesizing transient input traffic
868
Modeling and simulating of the fast roll casting process
869
Modeling and simulating Poisson processes having trends or nontrigonometric cyclic effects
870
Modeling and Simulation a Catalytic Fixed Bed Reactor to Produce Ethyl Benzene from Ethanol
871
Modeling and simulation for damage analysis of intelligent, self-reconfigurable ship fluid systems in early design phase
872
Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior
873
Modeling and simulation for ductile fracture prediction of crystalline polymer based on craze behavior
874
Modeling and simulation for performance estimation of open distributed energy management systems
875
Modeling and simulation for the field emission of carbon nanotubes array
876
Modeling and simulation gas separation by membrane of poly dimethyl siloxane
877
Modeling and simulation gas separation by membrane of poly dimethyl siloxane
878
Modeling and simulation in the production process control and material property calculation of complex structured EB-PVD TBCs
879
Modeling and simulation of 1 MWe solar tower plant’s solar flux distribution on the central cavity receiver
880
Modeling and Simulation of 3-Phase Voltage and Current Source Inverter using MATLAB/SIMULINK for Various Loads
881
Modeling and simulation of 5-axis milling processes
882
Modeling and Simulation of 6DOF Robot Manipulators with Tactile Position-Force Control
883
Modeling and simulation of a 100 kWe HT-PEMFC subsystem integrated with an absorption chiller subsystem
884
Modeling and Simulation of a 12 MW Wind Farm
885
Modeling and simulation of a class of coupled thermo-chemo-mechanical processes in multiphase solids Original Research Article
886
Modeling and simulation of a cycloconverter drive system for harmonic studies
887
Modeling and simulation of a direct methanol fuel cell anode
888
Modeling and Simulation of a Divided Wall Column for 1,3 Butadiene Purification
889
Modeling and simulation of a double auction artificial financial market
890
Modeling and simulation of a downdraft biomass gasifier 1. Model development and validation
891
Modeling and simulation of a freight train brake system
892
Modeling and simulation of a fully air swept ball mill in a raw material grinding circuit
893
Modeling and Simulation of a Gasoline-Electric Vehicle
894
Modeling and simulation of a grid connected PV system based on the evaluation of main PV module parameters
895
Modeling and simulation of a grid-connected PV generation system for electromagnetic transient analysis
896
Modeling and simulation of a hybrid actuator
897
Modeling and simulation of a hybrid dynamic system used in haptic interfaces Original Research Article
898
Modeling and simulation of a hydrostatic transmission with variable-displacement pump Original Research Article
899
Modeling and Simulation of a Jumping Four-legged Robot on Staircases
900
Modeling and simulation of a MOSFET gas sensor with platinum gate for hydrogen gas detection
901
Modeling and simulation of a new architecure stack applied on the PEM Fuel Cell
902
Modeling and simulation of a new Bridgeless SEPIC power factor correction circuit
903
Modeling and simulation of a PEM fuel cell stack considering temperature effects
904
Modeling and simulation of a root-zone heating in greenhouse using solar collectors
905
Modeling and Simulation of a Side-Port Regenerative Glass Furnace
906
Modeling and simulation of a simple glass window
907
Modeling and simulation of a single direct carbon fuel cell
908
Modeling and simulation of a SMB chromatographic process designed for enantioseparation
909
Modeling and simulation of a solar powered two bed adsorption air conditioning system
910
Modeling and Simulation of a Spherical Mobile Robot
911
Modeling and simulation of a stand-alone photovoltaic system using an adaptive artificial neural network: Proposition for a new sizing procedure
912
MODELING AND SIMULATION OF A TRAFFIC FLOW MODEL CONSIDERING THE INFLUENCE OF TRAFFIC INTERRUPTION
913
Modeling and simulation of absorption–desorption cyclic processes for hydrogen storage-compression using metal hydrides
914
Modeling and simulation of ac–dc buck-boost converter fed dc motor with uniform PWM technique
915
Modeling and Simulation of Acoustic Signal Transmission Losses in Shallow Water Channels Using Neural Networks
916
Modeling and simulation of active suspensions containing large numbers of interacting micro-swimmers
917
Modeling and simulation of aerial refueling by finite element method
918
Modeling and Simulation of Alternative Injections of CO2 and Water into Porous Carbonate Formations
919
Modeling and simulation of AlxGayIn1−x−yAs/InP quaternary structure for photovoltaic
920
Modeling and simulation of an activated carbon-based botanical air filtration system for improving indoor air quality
921
Modeling and simulation of an activated carbon–CO2 four bed based adsorption cooling system
922
Modeling and simulation of an impact test using wavelets, analytical solutions and finite elements
923
Modeling and Simulation of an Industrial Fluid Catalytic Cracking Riser Reactor Using a Lump-Kinetic Model for a Distinct Feedstock
924
Modeling and simulation of an industrial secondary reformer reactor in the fertilizer plants
925
Modeling and simulation of an integrated multi-shell fixed bed membrane reactor with well-mixed catalyst pattern for production of styrene and cyclohexane
926
Modeling and simulation of an oilseed meal desolventizing process Original Research Article
927
Modeling and Simulation of an Oxygen-Blown Bubbling Fluidized Bed Gasifier using the Computational Particle- Fluid Dynamics (CPFD) Approach
928
Modeling and simulation of asphaltene precipitation by normal pressure depletion
929
Modeling and simulation of asymmetrical three-roll bending process
930
Modeling and simulation of autonomous underwater vehicles: design and implementation
931
Modeling and simulation of buckling of embedded carbon nanotubes
932
Modeling and simulation of butanol separation from aqueous solutions using pervaporation
933
Modeling and simulation of carbon black synthesis in an aerosol flame reactor
934
Modeling and simulation of catalytic partial oxidation of methane to synthesis gas by using a plasma-assisted gliding arc reactor
935
Modeling and simulation of C-E deep bowl pulverizer
936
Modeling and simulation of cell populations interaction
937
Modeling and simulation of cement clinkering process with compact internal burning of carbon
938
Modeling and simulation of cement hydration kinetics and microstructure development Review Article
939
Modeling and simulation of centerless grinding of ball bearings
940
Modeling and simulation of circulating fast fluidized bed reactors and circulating fast fluidized bed membrane reactors for production of hydrogen by oxidative reforming of methane
941
Modeling and simulation of circulating fluidized bed reactor with catalytic ozone decomposition reaction
942
Modeling and Simulation of Claus Unit Reaction Furnace
943
Modeling and simulation of clean fuel production by Enterobacter cloacae IIT-BT 08
944
Modeling and simulation of co-gasification of coal and petcoke in a bubbling fluidized bed coal gasifier
945
Modeling and simulation of cogeneration nuclear power plant for seawater desalination
946
Modeling and simulation of combined gas turbine engine and heat pipe system for waste heat recovery and utilization
947
Modeling and simulation of combined pyrolysis and reduction zone for a downdraft biomass gasifier
948
Modeling and Simulation of Common Mode Voltage in a Three-Phase Delta Connection STATCOM with Parasitic Capacitors
949
Modeling and simulation of communication systems: an overview
950
Modeling and simulation of compressed air storage in caverns: A case study of the Huntorf plant
951
MODELING AND SIMULATION OF CONDENSED SULFUR IN CATALYTIC BEDS OF CLAUS PROCESS: RAPID ESTIMATION
952
Modeling and simulation of consumer response to dynamic pricing with enabled technologies
953
Modeling and simulation of corporate lifecycle using system dynamics
954
Modeling and simulation of corrosion product activity in pressurized water reactors under power perturbations
955
Modeling and simulation of coupled nuclear heat energy deposition and transfer in the fuel assembly of the Ghana Research Reactor-1 (GHARR-1)
956
Modeling and simulation of curing kinetics for the cardanol-based vinyl ester resin by means of non-isothermal DSC measurements
957
Modeling and simulation of cylindrical electro-chemical magnetic abrasive machining of AISI-420 magnetic steel
958
Modeling and simulation of damage in elastomer structures at high strains
959
Modeling and simulation of data transmission on a hybrid fiber coax cable network
960
Modeling and Simulation of DC Electric Railway System with Regenerative Braking: A Case Study of Isfahan Metro Line 1
961
Modeling and simulation of DC motors in dynamic conditions allowing for the armature reaction
962
Modeling and simulation of deadbeat-based PI controller in a single-phase H-bridge inverter for stand-alone applications
963
Modeling and simulation of deformation behavior, orientation gradient development and heterogeneous hardening in thin sheets with coarse texture
964
Modeling and simulation of deformation of hydrogels responding to electric stimulus
965
Modeling and simulation of desiccant wheel for air conditioning
966
Modeling and Simulation of Diimide Hydrogenation of Nitrile Butadiene Rubber Latex
967
Modeling and simulation of direct output current control for LCL-interfaced grid-connected inverters with parallel passive damping
968
Modeling and simulation of directional hardening in metals during non-proportional loading
969
Modeling and simulation of dissolved lead in groundwater influenced by porosity and seepage velocity in homogeneous formation
970
Modeling and Simulation of Distillation of a Binary Non-Reacting Mixture Using Rate-Based Approach in Packed Column under Total Reflux
971
Modeling and simulation of distributed systems and networks
972
Modeling and simulation of drug release from multi-layer biodegradable polymer microstructure in three dimensions
973
Modeling and simulation of drying operations in PVC powder production line: Experimental and theoretical study of drying kinetics on particle scale
974
Modeling and simulation of effective forces in the manipulation of cylindrical nanoparticles in a liquid medium
975
Modeling and simulation of electric machines, converters and systems
976
Modeling and simulation of electrification delivery in functionalized textiles in electromagnetic fields
977
Modeling and simulation of electronic structure, material interface and random doping in nano-electronic devices
978
Modeling and simulation of entric -virus transport in deltaic environment rivers state of Nigeria
979
Modeling and simulation of enzymatic membrane reactor for kinetic resolution of ibuprofen ester
980
Modeling and simulation of equation of state for nonadditive hard disk mixtures
981
Modeling and simulation of evaporation–pyrolysis processes of a naturally smoldering cylindrical cellulosic materials rod: Effect of smoldering rate on product concentrations
982
Modeling and Simulation of Fed-Batch Protein Refolding Process
983
Modeling and Simulation of Finite State Machine Memory Built-in Self Test Architecture for Embedded Memories
984
Modeling and Simulation of FIR Filters and Comparison of Frequency Response in Time Domain and Frequency Domain for UMTS
985
Modeling and simulation of fire spreading through the activity tracking paradigm
986
Modeling and simulation of fire spreading through the activity tracking paradigm
987
Modeling and simulation of fish-like swimming
988
Modeling and simulation of flexible needles
989
Modeling and simulation of flexible slider-crank mechanism with clearance for a closed high speed press system
990
Modeling and simulation of FPGA-based variable-speed drives using Simulink Original Research Article
991
Modeling and simulation of galvanic corrosion pit as a moving boundary problem
992
Modeling and simulation of gene regulation and metabolic pathways
993
Modeling and simulation of genetic algorithm using meta-models
994
Modeling and simulation of GPR wave propagation through wet snowpacks: Testing the sensitivity of a method for snow water equivalent estimation
995
Modeling and simulation of grain growth in Si3N4. III. Tip shape evolution Original Research Article
996
Modeling and simulation of gravitational solid–solid separation for optimum performance
997
Modeling and simulation of grid-connected photovoltaic energy conversion systems
998
Modeling and Simulation of Hamburger Cooking Process Using Finite Difference and CFD Methods
999
Modeling and simulation of heat transfer phenomena during investment casting
1000
Modeling and Simulation of Heat Transfer Phenomenon in Steel Belt Conveyer Sulfur Granulating Process
