<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Application of significance tests in quantitative metallographic analysis of a C–Mn–B steel
2
Application of silacyclic allylsilanes to the synthesis of β-hydroxy-δ-lactones: synthesis of Prelactone B
3
Application of silica aerogel encapsulated lipases in the synthesis of biodiesel by transesterification reactions
4
Application of silica as a catalyst support at high concentrations of methanol for direct methanol fuel cells
5
Application of silica gel organofunctionalized with 3(1-imidazolyl)propyl in an on-line preconcentration system for the determination of copper by FAAS
6
Application of silica gel-supported polyphosphoric acid (PPA/SiO2) as a reusable solid acid catalyst to the synthesis of 3-benzoylisoxazoles and isoxazolines
7
Application of silica vanadic acid as a dual Lewis and Bronsted acid catalytic ability in Dakin West reaction
8
Application of silica-based hyper-crosslinked sulfonate-modified reversed stationary phases for separating highly hydrophilic basic compounds
9
Application of silica-based monolith as solid phase extraction cartridge for extracting polar compounds from urine
10
Application of silicon strip detectors to small-animal imaging
11
Application of silicon strip detectors to small-animal imaging
12
Application of silicon strip detectors to X-ray computed tomography
13
Application of silicon strip detectors to X-ray computed tomography
14
Application of silicone membrane technology to increase quality and shelf life of fruits and vegetables: a review
15
Application of silver ion in the separation of macrolide antibiotic components by high-speed counter-current chromatography
16
Application of silver N-heterocyclic carbene complexes in O-glycosidation reactions Original Research Article
17
Application of Silver Sulfadiazine Cream With Early Surgical Intervention in Patients Suffering From Combined Burn-Blast Injury Facial Tattoos
18
Application of SIM-air modeling tools to assess air quality in Indian cities
19
Application of similarity coefficients to SIFT-MS data for livestock emission characterization
20
Application of similarity theory in the laser forming process
21
Application of simple negative feedback model for avalanche photodetectors investigation
22
Application of simple negative feedback model for avalanche photodetectors investigation
23
Application of simple practical models for early stage ageing precipitation kinetics and hardening in aluminium alloys
24
Application of simple practical models for early stage ageing precipitation kinetics and hardening in aluminium and magnesium composites
25
Application of simple sequence repeat (SSR) markers for molecular diversity and heterozygosity analysis in maize inbred lines
26
Application of simplest equations of Bernoulli and Riccati kind for obtaining exact traveling-wave solutions for a class of PDEs with polynomial nonlinearity
27
Application of simplified in vitro screening tests to detect genotoxicity of aristolochic acid
28
Application of simplified rapid equilibrium models in simulating experimental breakthrough curves from fixed bed biosorption reactors
29
Application of SIMPLISMA for the assessment of peak purity in liquid chromatography with diode array detection
30
Application of SIMPLISMA purity function for variable selection in multivariate regression analysis: A case study of protein secondary structure determination from infrared spectra
31
Application of SIMS analyses on oxygen transport in SOFC materials
32
Application of SIMS in microelectronics
33
Application of SIMS nano-analysis to the development of new metallurgical solutions
34
Application of simulated annealing algorithm for multi-criteria operation planning in flexible manufacturing systems
35
Application of Simulated Annealing and Genetic Algorithms in Solving Single Level Lot-Sizing Problems
36
Application of simulated annealing for estimating BAEPs in endocochlear pathologies
37
Application of simulated annealing for multispectral tomography Original Research Article
38
Application of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines
39
Application of simulated annealing for simultaneous retrieval of particle size distribution and refractive index
40
Application of simulated annealing fuzzy model tuning to umbilical cord acid-base interpretation
41
Application of simulated annealing method to pressure and force loading optimization in tube hydroforming process
42
Application of simulated annealing method to pressure and force loading optimization in tube hydroforming process
43
Application of Simulated Annealing Technique to Non-Linear Optimization of PC-SAFT for Petroleum Reservoir Fluids
44
Application of simulation models to the diagnosis of MSW landfills: An example
45
Application of simulation program to specific urban situation
46
Application of simulation technique to activity-based costing of agricultural systems: a case study
47
Application of simultaneous active and reactive power modulation of SMES unit under unequal α-mode for power system stabilization
48
Application of Simultaneous Morcellation in situ in Laparoscopic Myomectomy of Larger Uterine Leiomyomas
49
Application of simultaneous saccharification and fermentation (SSF) from viscosity reducing of raw sweet potato for bioethanol production at laboratory, pilot and industrial scales
50
Application of Sinc-collocation method for solving an inverse problem
51
Application of single and sequential extraction procedures to polluted and unpolluted soils
52
Application of single asperity abrasion process for surface micro-machining
53
Application of single drop liquid–liquid–liquid microextraction for the determination of fluoroquinolones in human urine by capillary electrophoresis
54
Application of single immunoaffinity clean-up for simultaneous determination of regulated mycotoxins in cereals and nuts
55
APPLICATION OF SINGLE OBJECTIVE GENETIC ALGORITHM TO OPTIMIZE HEAT TRANSFER ENHANCEMENT FROM A FLAT PLATE
56
Application of single pan thermal analysis to Cu–Sn peritectic alloys Original Research Article
57
Application of single point imaging (SPI) to solid state materials
58
Application of Single Program K° - Factor for Instrumental Neutron Activation Analysis )INAA)
59
Application of single step with three generalized hybrid points block method for solving third order ordinary differential equations
60
Application of Single Strand Conformation Polymorphism — PCR method for distinguishing cheese bacterial communities that inhibit Listeria monocytogenes
61
Application of single-drop microextraction and comparison with solid-phase microextraction and solid-phase extraction for the determination of α- and β-endosulfan in water samples by gas chromatography–electron-capture detection
62
Application of single-drop microextraction combined with in-microvial derivatization for determination of acidic herbicides in water samples by gas chromatography–mass spectrometry
63
Application of single-drop microextraction coupled with gas chromatography for the determination of multiclass pesticides in vegetables with nitrogen phosphorus and electron capture detection
64
Application of single-drop microextraction to the determination of dialkyl phthalate esters in food simulants
65
Application of single-sided silicon strip detector to energy and charge state measurements of medium energy ions in space
66
Application of single-sided silicon strip detector to energy and charge state measurements of medium energy ions in space
67
Application of single-strand conformation polymorphism to the study of bovine viral diarrhea virus isolates
68
Application of Single-Walled Carbon Nanotube and Poly (3-Methylthiophene) Modified Sensors for Electrochemical Determination of Levodopa and Benserazide
69
Application of single-walled carbon nanotube body to unique emitter: a first-principles study
70
Application of Single–Walled Carbon Nanotubes (SWCNT) in the Production of Glucose Biosensors and Improving Their Performance Using Gold Colloidal Nanoparticles and Usage of Polyaniline Nanostructure–Based Biosensors for Detecting Glucose and Cholesterol
71
Application of singular elements for fully Lagrangian modeling of dynamics of MEMS with thin beams
72
Application of singular spectrum analysis to the smoothing of raw kinematic signals
73
Application of singular value decomposition to the analysis of alpha-particle spectra
74
Application of singular value decomposition to the analysis of alpha-particle spectra
75
Application of Sinusoidal Functions to Partitioning Crude Protein and Metabolizable Energy Intake between Maintenance and Growth in Parent Stock of Broiler Chickens
76
Application of SiO2–poly(dimethylsiloxane) hybrid material in the fabrication of amperometric biosensor Original Research Article
77
Application of siRNA in targeting protein expression in kidney disease
78
Application of Si-strip technology to X-ray diffraction instrumentation
79
Application of Si-strip technology to X-ray diffraction instrumentation
80
Application of Six Sigma methodology for process design
81
Application of size-exclusion chromatography in the investigation of the in vitro stability of proinsulin and its cleaved metabolites in human serum and plasma
82
Application of size-exclusion chromatography to the analysis of shrimp for sulfonamide residues Original Research Article
83
Application of size-exclusion chromatography–inductively coupled plasma mass spectrometry for fractionation of element species in seeds of legumes
84
Application of sliding surface-enhanced fuzzy control for dynamic state estimation of a power system
85
Application of sliding-mode control to the design of a buck-basedsinusoidal generator
86
Application of slightly acidic electrolyzed water as a potential non-thermal food sanitizer for decontamination of fresh ready-to-eat vegetables and sprouts
87
Application of slightly overlapped circular particles assembly in numerical simulation of rocks with high friction angles
88
Application of SLM extraction for investigation of metal-humic acid bindings Original Research Article
89
Application of Sluice Gate in Different Positions and Its Effect on Hydraulic Parameters in Free-Flow Conditions
90
Application of slurry sample introduction to a low-power inductively coupled plasma atomic emission spectrometer incorporating a mini-torch
91
Application of small and micro cogeneration units
92
Application of small angle X-ray scattering (SAXS) for differentiation between normal and cancerous breast tissues
93
Application of small punch creep testing to a thermally sprayed CoNiCrAlY bond coat
94
Application of small-angle scattering for the identification of small amounts of platinum supported on porous silica Original Research Article
95
Application of small-angle scattering to the study of graphite-adsorbed hydrocarbons
96
Application of small-angle X-ray and neutron scattering techniques to the characterisation of starch structure: A review
97
Application of small-hole dry drilling in bimetal part
98
APPLICATION OF SMALL-SCALE EXPERIMENTAL MODELS FOR THERMAL COMFORT ASSESSMENT OF SUSTAINABLE BUILDING MATERIALS
99
Application of Smalltalk language for accelerator control
100
Application of Smalltalk language for accelerator control
101
Application of Smart Card security technology in manufacturing
102
Application of S-model learning automata for multi-objective optimal operation of power systems
103
Application of smoothed nite element method in coupled hydro-mechanical analyses
104
Application of Smoothing Methods for Determining of the Effecting Factors on the Survival Rate of Gastric Cancer Patients
105
Application of smoothing technique on twin support vector machines
106
Application of snakes and dynamic programming optimisation technique in modeling of buildings in informal settlement areas
107
Application of SnO2/Alumina Nanocatalyst in Removal of Naphthenic Acids from Crude Oil
108
Application of Snyder–Dolan classification scheme to the selection of “orthogonal” columns for fast screening of illicit drugs and impurity profiling of pharmaceuticals – I. Isocratic elution
109
Application of SO42−/TiO2 solid superacid in decontaminating radioactive pollutants
110
Application of Sobolev gradient method to Poisson–Boltzmann system
111
Application of social cognition principles to treatment recommendations for ethnic minority clients: The case of Asian Americans
112
Application of Social Cognitive Theory to Prevent Waterpipe Use in Male High-school Students in Kerman, Iran
113
Application of Social Marketing in Assisting Program Managers to Tackle Public Health Concerns
114
Application of socialscience on cardiorespiratory specialist courses
115
APPLICATION OF SODIUM C APRYLATE AS A STABILIZER DURING PASTEURIZATION OF INFUSIBLE PLATELET MEMBRANE AND EVALUATION OF ITS EFFECTIVENESS BY TURBIDITY ASSAY
116
Application of sodium dodecyl sulfate and humic acid as surfactants on electrokinetic remediation of cadmium-contaminated soil Original Research Article
117
Application of sodium dodecylsulfate (SDS) micellar solution as an organized medium for electropolymerization of thiophene derivatives in water
118
Application of soft and hard modeling methods to resolve the three competitive complex formation of 13 lanthanide-Arsenazo III complexes
119
Application of soft- and hard-modelling approaches to resolution of kinetics of electron donor–acceptor complex formation of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone with imipramine in different solutions Original Research Article
120
Application of soft computing approaches for modeling saturation pressure of reservoir oils
121
Application of Soft Computing in Forecasting Wave Height (Case Study: Anzali)
122
Application of Soft Computing in the Design and Optimization of Tuned Liquid Column–Gas Damper for Use in Offshore Wind Turbines
123
Application of Soft Computing Methods in the Analysis of Velocity Field in Dividing Channel
124
Application of soft computing models to hourly weather analysis in southern Saskatchewan, Canada
125
Application of Soft Computing to Automatic Music Information Retrieval
126
Application of soft operations research methods in healthcare: A systematic re- view
127
Application of Soft Sets to Determine Hamilton Cycles in a Graph
128
Application of soft systems methodology to trigger solar energy in Iranian buildings
129
Application of soft tissue modelling to image-guided surgery
130
Application of soft X-ray absorption spectroscopy and two-dimensional correlation spectroscopy to the electrochemical reaction in the Li1+xV3O8/Li cell
131
Application of soil enzyme activity test kit in a field experiment
132
Application of soil enzyme activity test kit in a field experiment
133
Application of soil mulches on establishment and growth of native and commercial tall fescue (Festuca arundinacea Schreb.) in an arid environment
134
Application of soil properties, auxiliary parameters, and their combination for prediction of soil classes using decision tree model
135
Application of sol gel spin coated yttria-stabilized zirconia layers for the improvement of solid oxide fuel cell electrolytes produced by atmospheric plasma spraying
136
Application of solar assisted heating and desiccant cooling systems for a domestic building
137
Application of solar collectors to control the visible plume from wet cooling towers of a commercial building in Hong Kong: A case study
138
Application of solar energy for water supply and sanitation in Arsenic affected rural areas: a study for Kaudikasa village, India
139
Application of solar light for degradation of ammonia in petrochemical wastewater by a floating TiO2/LECA photocatalyst
140
Application of solar thermal desorption to remediation of mercury-contaminated soils
141
Application of solar-powered desalination in a remote town in South Australia Original Research Article
142
Application of sol–gel based octyl-functionalized mesoporous materials coated fiber for solid-phase microextraction
143
Application of solid oxide fuel cell for flare gas recovery as a new approach; a case study for Asalouyeh gas processing plant, Iran
144
Application of solid oxide fuel cell technology for power generation—A review
145
Application of solid phase extraction and high-performance liquid chromatography to qualitative and quantitative analysis of nucleotides and nucleosides in human cerebrospinal fluid
146
Application of solid phase extraction and two-dimensional gas chromatography coupled with time-of-flight mass spectrometry for fast analysis of polycyclic aromatic hydrocarbons in vegetable oils
147
Application of solid phase extraction with the use of silica modified with polyaniline film for pretreatment of samples from plant material before HPLC determination of triterpenic acids
148
Application of Solid Phase Microextraction (SPME) Sampler for Determination of Carbon Disulfide in Air
149
Application of Solid Phase Microextraction followed by Chromatograph-Flame Ionization Detector for Sampling and Analysis of Acetonitrile in Air
150
Application of solid phase microextraction on dental composite resin analysis
151
Application of solid phase microextraction to the determination of strychnine in blood
152
Application of solidified floating organic drop microextraction method for biomonitoring of chlorpyrifos and its oxon metabolite in urine samples
153
Application of solid–liquid phase transfer catalysis system for peroxyester synthesis: A kinetic study of hydroperoxides acylation in the presence of solid sodium carbonate Original Research Article
154
Application of solid-phase extraction and liquid chromatography–mass spectrometry to the determination of neonicotinoid pesticide residues in fruit and vegetables
155
Application of solid-phase extraction and micellar electrokinetic capillary chromatography to the study of hydrolytic and photolytic degradation of phenoxy acid and phenylurea herbicides
156
Application of solid-phase extraction coupled with freezing-lipid filtration clean-up for the determination of endocrine-disrupting phenols in fish Original Research Article
157
Application of solid-phase extraction to brewed coffee caffeine and organic acid determination by UV/HPLC
158
Application of solid-phase extraction to brewed coffee caffeine and organic acid determination by UV/HPLC
159
Application of solid-phase extraction to quantitatively determine cyproconazole and tebuconazole in treated wood using liquid chromatography with UV detection
160
Application of solid-phase extraction to the analysis of the isomers generated in biodesulfurization against methylated dibenzothiophenes
161
Application of solid-phase microextraction and gas chromatography–mass spectrometry for measuring chemicals in saliva of synthetic leather workers
162
Application of solid-phase microextraction and gas chromatography–mass spectrometry to the determination of volatile organic compounds in end-exhaled breath samples
163
Application of solid-phase microextraction combined with gas chromatography–mass spectrometry to the determination of butylated hydroxytoluene in bottled drinking water
164
Application of solid-phase microextraction for determination of organic vapours in gaseous matrices
165
Application of solid-phase microextraction for determination of pyrethroids in groundwater using liquid chromatography with post-column photochemically induced fluorimetry derivatization and fluorescence detection
166
Application of solid-phase microextraction for determining phenylurea herbicides and their homologous anilines from vegetables
167
Application of solid-phase microextraction for monitoring the photocatalytic decomposition of fenthion and parathion in aqueous TiO2 suspensions Original Research Article
168
Application of solid-phase microextraction for the determination of organophosphorous pesticides in aqueous samples by gas chromatography with flame photometric detector
169
Application of solid-phase microextraction for the determination of organophosphorus pesticides in textiles by gas chromatography with mass spectrometry Original Research Article
170
Application of solid-phase microextraction in the investigation of protein binding of pharmaceuticals
171
Application of solid-phase microextraction in the monitoring of priority pesticides in the Kalamas River (N.W. Greece)
172
Application of solid-phase microextraction to the analysis of volatile compounds in virgin olive oils
173
Application of solid-phase microextraction to the analysis of volatile compounds in virgin olive oils from five new cultivars
174
Application of solid-phase microextraction to the quantitative analysis of 1,8-cineole in blood and expired air in a Eucalyptus herbivore, the brushtail possum (Trichosurus vulpecula)
175
Application of solid-phase microextraction to the recovery of explosives and ignitable liquid residues from forensic specimens
176
Application of solid-phase microextraction to the study of the photochemical behaviour of five priority pesticides: “on-fiber” and aqueous photodegradation
177
Application of solid-phase microextraction to virgin olive oil quality control
178
Application of solid-phase microextraction–gas chromatography–mass spectrometry to characterize intermediates in a joint solar–microbial process for total mineralization of Aroclor 1254
179
Application of Solid-State 13C NMR Spectroscopy and Dipolar Dephasing Technique to Determine the Extent of Condensation in Technical Lignins
180
Application of solid-state fermentation to food industry—A review Original Research Article
181
Application of solid-state galvanic cells to the thermodynamic study of the CaO–SiO2–ZrO2 system
182
Application of soluble bio-organic substances (SBO) as photocatalysts for wastewater treatment: Sensitizing effect and photo-Fenton-like process
183
Application of soluble poly(3-alkylpyrrole) polymers on textiles
184
Application of solution structure theorem to non-Fourier heat conduction problems: Analytical approach
185
Application of solvent extraction for the removal of amoxicillin drug residues in environmental waters
186
Application of solvent microextraction in a single drop for the determination of new antifouling agents in waters
187
Application of solvent microextraction to the analysis of nitroaromatic explosives in water samples
188
Application of solvent-assisted dispersive solid phase extraction combined with flame atomic absorption spectroscopy for the determination of trace amounts of Cadmium
189
Application of some anisotropic damage model to the prediction of the failure of some complex industrial concrete structure
190
Application of Some Antifungal and Antioxidant Compounds Extracted from Some Herbs to Be Used in Cakes as Biopreservatives
191
Application of some combined adsorbents to remove salinity parameters from drainage water Original Research Article
192
Application of some damage identification methods in offshore platforms
193
Application of Some Herbal Medicine Used for the Treatment of Osteoarthritis and Chondrogenesis
194
Application of sonic and radar tests on the piers and walls of the Cathedral of Noto
195
Application of sonication and mixing for nanoencapsulation of the cyanobacterium Spirulina platensis in liposomes
196
Application of Sonocatalyst and Sonophotocatalyst for Degradation of Acid Red 14 in Aqueous Environment
197
Application of Sonoelastography in Differential Diagnosis of Benign and Malignant Thyroid Nodules
198
Application of Sono–photo‑Fenton process for degradation of phenol derivatives in petrochemical wastewater using full factorial design of experiment
199
Application of Sorbent materials in Oil Spill management: A review
200
Application of Sorbent Waste Material for Porous Ceramics Production
201
Application of sorbents for mercury control for utilities burning lignite coal
202
Application of Sorghum, Sunflower and Rice Water Extract Combinations Helps in Reducing Herbicide Dose for Weed Management in Rice
203
Application of sorption heat recovery systems in heating appliances—Feasibility study
204
Application of source encoding to incoherent Talbot imaging and the Lau effect
205
Application of space periodic variation of light polarization in imaging polarimetry
206
Application of space–time CE/SE method to shallow water magnetohydrodynamic equations
207
Application of Space-time Conservation Element and Solution Element Method in Intake and Exhaust Flows of High Power Density Diesel Engine
208
Application of space–time conservation element and solution element method in streamline simulation
209
Application of space-time transmit diversity to single-carrier transmission with frequency-domain equalisation and receive antenna diversity in a frequency-selective fading channel
210
Application of spallation neutron sources in support of radiation hardness studies
211
Application of spallation neutron sources in support of radiation hardness studies
212
Application of Sparse Linear Discriminant Analysis and Elastic Net for Diagnosis of IgA Nephropathy: Statistical and Biological Viewpoints
213
Application of Spatial and Network Analysis to Evaluate Shelter Plan for Tsunami Evacuation
214
Application of spatial Besag, York and Mollie method in estimating interprovincial neck pain prevalence in the National Disease and Health Survey in Iran
215
Application of spatial EOF and multivariate time series model for evaluating agricultural drought vulnerability in Korea
216
Application of spatial multi-criteria analysis to site selection for a local park: A case study in the Bergamo Province, Italy
217
Application of Spatial Structures in Bridges Deck
218
Application of Spatio-temporal Model to Estimate Burden of Diseases, Injuries and Risk Factors in Iran 1990 – 2013
219
Application of sPC-SAFT and group contribution sPC-SAFT to polymer systems—Capabilities and limitations
220
Application of SPCTRAL2 parametric model in estimating spectral solar irradiances over polluted Athens atmosphere
221
Application of special finite elements for determination of the parameters of fracture mechanics of nonlinear elastomers with cracks
222
Application of Special Granular Structures for semi-active damping of lateral beam vibrations
223
Application of species-specific PCR for the identification of dried bonito product (Katsuobushi)
224
Application of species-specific polymerase chain reaction assays to verify the labeling of quail (Coturnix coturnix), pheasant (Phasianus colchicus) and ostrich (Struthio camelus) in pet foods
225
Application of specific exergy to macrophytes as an integrated index of environmental quality for coastal lagoons
226
Application of Specific Monoclonal Antibodies for Characterization of Leishmania spp. Promastigotes Using Indirect Immunofluorescent and Immunoperoxidase Tests
227
Application of Specific Primers and Polymerase Chain Reaction for Identification of Ralstonia Solanacearum Biovar2
228
Application of Spectral Analysis in Mapping Hydrothermal Alteration of the Northwestern Part of the Kerman Cenozoic Magmatic Arc, Iran
229
Application of spectral analysis of daily water level and spring discharge hydrographs data for comparing physical characteristics of karstic aquifers
230
Application of Spectral Analysis of Surface Waves (SASW) Method: Rock Mass Characterization
231
Application of spectral analysis to meteorological and soil solution chemistry data
232
Application of spectral beam finite element with a crack and iterative search technique for damage detection
233
Application of spectral collocation method to a class of nonlinear PDEs
234
Application of Spectral Computed Tomography (CT) Combined with Conventional CT Features in Differentiating Malignant Pulmonary Mass-Like Lesions
235
Application of spectral conjugate gradient methods for solving unconstrained optimization problems
236
Application of spectral decomposition algorithm for mapping water quality in a turbid lake (Lake Kasumigaura, Japan) from Landsat TM data
237
Application of spectral decomposition analysis to in vivo quantification of aluminum by neutron activation analysis
238
Application of spectral decomposition of Greenʹs function to linear inverse problem
239
Application of spectral fluorescence microscopy for the characterization of Athabasca bitumen vacuum bottoms
240
Application of spectral forcing in lattice-Boltzmann simulations of homogeneous turbulence
241
Application of spectral karyotyping to the analysis of the human chromosome complement of interspecies somatic cell hybrids
242
Application of spectral libraries for high-performance liquid chromatography–atmospheric pressure ionisation mass spectrometry to the analysis of pesticide and explosive residues in environmental samples
243
Application of spectral methods for high-frequency financial data to quantifying states of market participants
244
Application of Spectral Mixture Analysis and Image Fusion Techniques for Image Sharpening
245
Application of spectral reflectance to the monitoring of ZnO nanorod growth
246
Application of Spectral Signatures and Colour Ratios to Estimate Chlorophyll in Singaporeʹs Coastal Waters
247
Application of spectrally resolved scanning photoluminescence to assess relaxation processes of InGaAs and InAlAs layers strained in compression and tension
248
Application of spectrally resolved scanning photoluminescence to assess relaxation processes of InGaAs and InAlAs layers strained in compression and tension
249
Application of spectrofluorimetric techniques to the study of marine mucilages in the Adriatic Sea: preliminary results
250
Application of spectrometric nuclear borehole logging for reserves estimation and mine planning at Callide coalfields open-cut mine
251
Application of spectroscopic ellipsometry to probe the environmental and photo-oxidative degradation of poly(p-phenylenevinylene) (PPV)
252
Application of spectroscopic ellipsometry to the investigation of the optical properties of cobalt-nanostructured silica thin layers
253
Application of spectroscopic method to predict sugar content of sugarcane internodes
254
Application of spectroscopic photoemission and low energy electron microscope to high-k gate dielectrics: Relationship between surface morphology and electronic states during Hf-silicide formation
255
Application of spectroscopic techniques for the identification of organic and inorganic constituents of salvadora persica from Saudi Arabia
256
Application of spectroscopic techniques for the study of paper documents: A survey
257
Application of spectroscopic techniques for the study of paper documents: A survey
258
Application of spectroscopic techniques to the study of illuminated manuscripts: A survey
259
Application of spectroscopic techniques to the study of illuminated manuscripts: A survey
260
Application of spectroscopy in herbal metabolomics
261
Application of spectrum-volume fractal modeling for detection of mineralized zones
262
Application of Speed estimation Techniques for Induction Motor Drives and Electric Traction industries and vehicle
263
Application of spent Agaricus subrufescens compost in integrated production of seedlings and plants of tomato
264
Application of spent grains to increase porosity in bricks
265
Application of spherical and cylindrical wrapping algorithms in a musculoskeletal model of the upper limb
266
Application of spherical harmonics derived space rotation invariant indices to the analysis of multiple sclerosis lesionsʹ geometry by MRI
267
Application of Spherical Mesoporous Silica MCM-41 for Adsorption of Dibenzothiophene (A Sulfur Containing Compound) from Model Oil
268
Application of Spherical Statistics to Change Vector Analysis of Landsat Data: Southern Appalachian Spruce–Fir Forests
269
Application of spherical subset simulation method and auxiliary domain method on a benchmark reliability study
270
Application of SPI for Modeling energy consumption in Sarcheshmeh SAG and ball mills
271
Application of SPICE simulation to study WDM and SCM systems using EDFAs with chirping
272
Application of spindle speed variation for chatter suppression in turning
273
Application of spline element for large-amplitude free vibrations of laminated orthotropic straight/curved beams
274
Application of spline to approximate the solution of singularly perturbed boundary-value problems
275
Application of spline wavelet self-convolution in processing capillary electrophoresis overlapped peaks with noise
276
Application of spline wavelet self-convolution in processing capillary electrophoresis overlapped peaks with noise Original Research Article
277
Application of SPR biosensor for medical diagnostics of human hepatitis B virus (hHBV)
278
Application of spray combustion simulation in DI diesel engine
279
Application of Sr isotopes in secondary silicate minerals to paleogroundwater hydrology: An example from K-metasomatized rocks in the western U.S.
280
Application of Sr isotopes to geochemical mapping and provenance analysis: The case of Aichi Prefecture, central Japan
281
Application of SRXRFM to geoscience
282
Application of Srβ-alumina solid electrolyte to a CO2 gas sensor
283
Application of SSH and a macroarray to investigate altered gene expression in Mytilus edulis in response to exposure to benzo[a]pyrene
284
Application of SSIIM numerical model in simulation of local scouring around the aerodynamic bridge pier located in 90 ° bend
285
Application of SSR Markers for Purity Testing of Commercial Hybrid Soybean (Glycine max L.)
286
Application of SSR markers in the construction of Australian barley genetic maps
287
Application of Stability Indicating HPLC Method for Quantitative Determination of Etoricoxib and Paracetamol in Pharmaceutical Dosage Form
288
Application of stabilized biosolids and fly ash mixtures as soil amendments and their impact on free living nematodes and carrot (Daucus carota) yield
289
Application of stable carbon isotope analysis to the detection of 17β-estradiol administration to cattle
290
Application of stable isotope analysis to quantify the retention of eroded carbon in grass filters at the North Appalachian experimental watersheds
291
Application of stable isotope dilution assays based on liquid chromatography–tandem mass spectrometry for the assessment of folate bioavailability
292
Application of Stacked Ensemble Techniques in Head and Neck Squamous Cell Carcinoma Prognostic Feature Subsets
293
Application of staggered undersampling to power quality monitoring
294
Application of standard addition methodology for the determination of banned azo dyes in different leather types Original Research Article
295
Application of standardized mistletoe extracts augment immune response and down regulates metastatic organ colonization in murine models
296
Application of standardized principal component analysis to land-cover characterization using multitemporal AVHRR data
297
Application of Starch Foams Containing Plant Essential Oils to Prevent Mold Growth and Improve Shelf Life of Packaged Bread
298
Application of STATCOMs to wind farms
299
Application of static analyses for state-space reduction to the microcontroller binary code
300
Application of static and dynamic liquid-phase microextraction in the determination of polycyclic aromatic hydrocarbons
301
Application of static headspace gas chromatography for determination of acetaldehyde in beer
302
Application of static headspace gas chromatography for determination of acetaldehyde in beer
303
Application of static liquid-phase microextraction to the analysis of organochlorine pesticides in water
304
Application of static microcoils and WURST pulses for solid-state ultra-wideline NMR spectroscopy of quadrupolar nuclei
305
Application of Static Pressure Change in Estimation of Elastic Parameters of Rabbit's Artery by Doppler Ultrasound
306
Application of static var system auxiliary controllers to improve the transient performance of series compensated long transmission lines
307
Application of statically indeterminate fracture mechanics, SIFM, to a circumferentially cracked cylinder problem
308
Application of statically indeterminate fracture mechanics, SIFM, to a circumferentially cracked cylinder problem Original Research Article
309
Application of statistical experimental design to the optimisation of microextraction by packed sorbent for the analysis of nonsteroidal anti-inflammatory drugs in human urine by ultra-high pressure liquid chromatography
310
Application of statistical experimental designs for the optimization of medium constituents for the production of citric acid from pineapple waste
311
Application of statistical experimental methods to optimize production of poly(γ-glutamic acid) by Bacillus licheniformis CCRC 12826
312
Application of statistical formulas to hydrodynamic torque converter modelling
313
Application of statistical information criteria for optimal fuzzy model construction
314
Application of statistical mechanics to collective motion in biology
315
Application of statistical mechanics to stochastic transport
316
Application of statistical mechanics to the analysis of various physical properties of elastomeric networks — a review
317
Application of statistical mechanics to the wetting of complex liquids
318
Application of statistical method for FBR plant transient computation
319
APPLICATION OF STATISTICAL METHODS IN ANALYSIS OF AGRICULTURE - CORRELATION AND REGRESSION ANALYSIS
320
Application of statistical models in proportioning lightweight self-consolidating concrete with expanded clay aggregates
321
Application of statistical moment method to thermodynamic quantities of metals and alloys
322
Application of statistical moment method to thermodynamic quantities of metals and alloys
323
Application of statistical physics formalism to the modeling of adsorption isotherms of ibuprofen on activated carbon
324
Application of statistical physics methods and conceptsto the study of science & technology systems
325
Application of statistical physics to heartbeat diagnosis
326
Application of statistical physics to impact fragmentation
327
Application of statistical physics to politics
328
Application of statistical physics to the Internet traffics
329
Application of statistical power analysis – How to determine the right sample size in human health, comfort and productivity research
330
Application of statistical process control, sampling, and validation for producing Listeria monocytogenes-free chicken leg quarters processed in steam followed by impingement cooking Original Research Article
331
Application of statistical quality control measures for near-surface geochemical petroleum exploration
332
Application of statistical techniques and artificial neural network to estimate force from sEMG signals
333
Application of statistically based experimental designs for the optimization of exo-polysaccharide production by Cordyceps militaris NG3
334
Application of statistically similar representative volume element in numerical simulations of crash box stamping
335
Application of statistics and machine learning for risk stratification of heritable cardiac arrhythmias
336
Application of Statistics to Evaluate Iranian Analytical Laboratories Proficiency: Case of Aflatoxins in Pistachio
337
Application of steady-state and dynamic modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill: Part I. Linear approaches
338
Application of steady-state and dynamic modeling for the prediction of the BOD of an aerated lagoon at a pulp and paper mill: Part II. Nonlinear approaches
339
Application of Steam Enhanced Extraction method on BTEX contaminated soil in a Nigerian petroleum depot and Automobile workshop sites in Ilorin metropolis, Nigeria.
340
Application of steam explosion to the fractionation and rapid vapor-phase alkaline pulping of wheat straw
341
Application of steel fibers in beam–column joints of rigid-framed railway bridges to reduce longitudinal and shear rebars
342
Application of steel fibre concrete for underwater concrete slabs
343
Application of steel thin film electrical resistance sensor for in situ corrosion monitoring
344
Application of Stefan–Maxwell approach to azeotropic separation by membrane distillation
345
Application of stem cell markers in search for neoplastic germ cells in dysgenetic gonads, extragonadal tumours, and in semen of infertile men
346
Application of Stem Cell Technology for Treatment of Diabetes Mellitus: Ethical Considerations
347
Application of Stepwise Discriminant Analysis for the Identification of Salinity Sources of Groundwater
348
Application of step-wise gradient high-performance counter-current chromatography for rapid preparative separation and purification of diterpene components from Pseudolarix kaempferi Gordon
349
Application of stepwise gradients in counter-current chromatography: A rapid and economical strategy for the one-step separation of eight coumarins from Seseli resinosum
350
Application of stereo vision to the study of mixed-mode crack-tip deformations
351
Application of stereocontrolled aldol coupling to synthesis of segments of immunosuppressants FK-506 and rapamycin
352
Application of stereological methods to estimate post-mortem brain surface area using 3 T MRI
353
Application of stereology on microstructure of neodymium-doped yttrium aluminum garnet (Nd:YAG) transparent ceramics
354
Application of Stereology on Neodymium-Doped Yttrium Aluminum Garnet (Nd:YAG) Transparent Ceramics
355
Application of stereology to the statistical description of the spatial distribution of composition and other scalar properties in three dimensional space Original Research Article
356
Application of stereoscopic tracking velocimetry for experimental and numerical investigation of directional solidification
357
Application of Stereovision to the Mechanical Characterisation of Ceramic Refractories Reinforced with Metallic Fibres
358
Application of stir bar sorptive extraction in combination with column liquid chromatography for the determination of polycyclic aromatic hydrocarbons in water samples
359
Application of stir bar sorptive extraction in combination with column liquid chromatography for the determination of polycyclic aromatic hydrocarbons in water samples Original Research Article
360
Application of stir bar sorptive extraction to the determination of polycyclic aromatic hydrocarbons in aqueous samples
361
Application of Stirling cooler to food processing: Feasibility study on butter churning Original Research Article
362
Application of stochastic algorithms for parameter estimation in the liquid–liquid phase equilibrium modeling
363
Application of stochastic filtering for lifetime prediction
364
Application of stochastic filtering for lifetime prediction
365
Application of Stochastic Optimal Control, Game Theory and Information Fusion for Cyber Defense Modelling
366
Application of stochastic parameter optimization to the Sacramento Soil Moisture Accounting model
367
Application of stochastic programming for iron ore quality control
368
Application of Stochastic Programming to Determine Operating Reserves with Considering Wind and Load Uncertainties
369
Application of stochastic resonance in target detection in shallow-water reverberation
370
Application of Stochastic Simulation in Assessing Effect of Particle Morphology on Fracture Characteristics of Sandstone
371
Application of stochastic wave approach to the problem of backscattering from the surfaces of airless cosmic bodies
372
Application of stochastic weighted algorithms to a multidimensional silica particle model
373
Application of stop and play models to the representation of magnetic characteristics of silicon steel sheet
374
APPLICATION OF STORYTELLING ELEMENTS IN LEARNING TECHNIQUES OF ASPERGER SYNDROME CHILDREN
375
Application of strain echocardiography in valvular heart diseases
376
Application of strain gradient elasticity theory for buckling analysis of protein microtubules
377
Application of strain gradient plasticity theory to model Charpy impact energy of functionally graded steels
378
Application of strain gradient plasticity theory to model Charpy impact energy of functionally graded steels using modified stress–strain curve data
379
Application of strain rate potentials with multiple linear transformations to the description of polycrystal plasticity
380
Application of strain–time correspondence as a tool for structural analysis of acrylonitrile–butadiene copolymer nanocomposites with various organoclay loadings
381
Application of strand meshes to complex aerodynamic flow fields
382
Application of strategic fuzzy games to wage increase negotiation and decision problems
383
Application of strategic sample composition to the screening of anti-inflammatory drugs in water samples using solid-phase microextraction
384
Application of strategic sample composition to the screening of anti-inflammatory drugs in water samples using solid-phase microextraction Original Research Article
385
Application of strategies for sanitation management in wastewater treatment plants in order to control/reduce greenhouse gas emissions
386
Application of strength properties determined by nanoindentations to describe the material response in micro- and macro-indentation
387
Application of Stress Diffusers to Beam-to-Column Connection
388
Application of stress intensity to design of anisotropic/isotropic bi-materials with a wedge
389
Application of stripping voltammetry and microelectrodes in vitro biocompatibility and in vivo toxicity tests of AISI 316L corrosion products
390
Application of stripping voltammetry at a static mercury drop electrode for the determination of aluminium and iron in Portland cement
391
Application of Strong Fluctuation Theory to Microwave Emission from Dry Snow
392
Application of strontium doped calcium polyphosphate bioceramic as scaffolds for bone tissue engineering
393
Application of strontium isotopes to understanding the hydrology and paleohydrology of the Altiplano, Bolivia–Peru
394
Application of structural dynamic approach to estimate space variability of primary producers in shallow marine water
395
Application of structural dynamic approach to estimate space variability of primary producers in shallow marine water
396
Application of structural equation modeling to evaluate the intention of shippers to use Internet services in liner shipping
397
Application of Structural Equation Modeling to Scrutinize the Causes of Grape Losses in Production Chain
398
Application of Structural Equations Modeling to Assess Relationship among Emotional Intelligence, General Health and Occupational Accidents
399
Application of structure preserving energy margin sensitivity to determine the effectiveness of shunt and series FACTS devices
400
Application of structured singular value theory for robust stability and control analysis in multimachine power systems. II. Numerical simulations and results
401
Application of Structured Total Least Squares for System Identification and Model Reduction
402
APPLICATION OF STUB LOADED FOLDED STEPPED IMPEDANCE RESONATORS TO DUAL BAND FILTERS
403
Application of subcritical water liquefaction as pretreatment for supercritical water gasification system in domestic wastewater treatment plant
404
Application of subjective global assessment as a screening tool for malnutrition in surgical patients in Vietnam
405
Application of submerged hollow fiber membrane in membrane bioreactors: Filtration principles, operation, and membrane fouling Original Research Article
406
Application of submerged membrane bioreactor for aquaculture effluent reuse Original Research Article
407
Application of subset simulation in reliability estimation of underground pipelines
408
Application of subset simulation methods to reliability benchmark problems
409
Application of subspace projection approaches for reduced-order modeling of electromagnetic systems
410
Application of substituted 2-(trimethylsilyl)ethyl esters to suppress diketopiperazine formation
411
APPLICATION OF SUBSYSTEMS CHANGE RANKING METHODOLOGY IN AIRCRAFT REDESIGN PROCESS
412
Application of successive interference cancellation to the GPS pseudolite nearfar problem
413
Application of successive principles of repair to correct supravalvular aortic stenosis
414
Application of successive projections algorithm for variable selection to determine organic acids of plum vinegar
415
Application of sugar foam to a pyrite-contaminated soil
416
Application of sugaring-out extraction for the determination of sulfonamides in honey by high-performance liquid chromatography with fluorescence detection
417
Application of sulfate reduction for the biological conversion of anglesite (PbSO4) to galena (PbS)
418
Application of sulfonic acid functionalized MCM-41 materials—Selectivity changes in various probe reactions Original Research Article
419
Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO 3H) in the Green Strecker Reaction under Solvent Free Condition
420
Application of Sulfonic Acid Functionalized Nanoporous Silica (SBA-Pr-SO3H) in the Green One-pot Synthesis of Polyhydroacridine Libraries
421
Application of Sulfonic Acid Functionalized SBA-15 as a Nanoporous Acid Catalyst in Microwave Assisted Synthesis of 2-Aryl Benzoxazoles
422
Application of sulfur microparticles for solid-phase extraction of polycyclic aromatic hydrocarbons from sea water and wastewater samples Original Research Article
423
Application of Sulfur Nanoparticles as a Solid Phase Extraction Sorbent for the Preconcentration of Lead(II) and Palladium(II) in Environmental Samples Prior to Flame Atomic Absorption Spectrometry Determination
424
Application of sulfur ylide mediated epoxidations in the asymmetric synthesis of β-hydroxy-δ-lactones. Synthesis of a mevinic acid analogue and (+)-prelactone B
425
Application of sulfuric acid doped poly (m-aminophenol) as aliphatic alcohol vapor sensor material
426
Application of Sulfur-Modified Magnetic Nanoparticles for Cadmium Removal from Aqueous Solutions
427
Application of Sumudu Transform in Fractional Kinetic Equations
428
Application of Sumudu Transform in Fractional Kinetic Equations
429
Application of Sumudu Transform in Generalized Fractional Reaction–Diffusion Equation
430
APPLICATION OF SUPER ELEMENTS TO FREE VIBRATION ANALYSIS OF LAMINATED STIFFENED PLATES
431
Application of Superabsorbent and Mulch on Some Traits of African Marigold (Tagetes erecta) under Irrigation Intervals
432
Application of superconducting magnetic energy storage unit for damping of subsynchronous oscillations in power systems
433
Application of Superconducting Magnetic Energy Storage unit in multi-machine power systems
434
Application of superconducting quantum interference devices to nuclear magnetic resonance
435
Application of supercritical carbon dioxide (scCO2) for the extraction of glycolipids from Lactobacillus plantarum B-01
436
Application of supercritical carbon dioxide (scCO2) for the extraction of lipopolysaccharides (LPS) from Salmonella enterica subsp. enterica PCM 2266
437
Application of supercritical carbon dioxide for the extraction of alkylresorcinols from rye bran
438
Application of Supercritical Carbon Dioxide in Energetic Materials Processes: A Review
439
Application of supercritical carbon dioxide–co-solvent mixtures for removal of organic material from archeological artifacts for radiocarbon dating
440
Application of supercritical CO2 in lipid extraction – A review Review Article
441
Application of supercritical fluid extraction for fractionation of enantiomers
442
Application of Supercritical Fluid Technology for Preparation of Drug Loaded Solid Lipid Nanoparticles
443
Application of supercritical fluid to preparation of powders of high-molecular weight drugs for inhalation
444
Application of superelastic NiTi wires for mandibular distraction
445
Application of superelastic NiTi wires for mandibular distraction
446
Application of superfluid shock tube facility to experiments of highly transient low-temperature thermo-fluid dynamic phenomena Original Research Article
447
Application of superheated emulsion in neutron spectrometry at 45 MeV electron linac
448
Application of superheated emulsion in neutron spectrometry at 45 MeV electron linac
449
Application of superhypergraphs-based domination number in real world
450
Application of superparamagnetic iron oxide to imaging of hepatocellular carcinoma
451
Application of superparamagnetic nanoparticles in purification of plasmid DNA from bacterial cells
452
Application of Support Vector Machine and Gene Expression Programming on Tropospheric ozone Prognosticating for Tehran Metropolitan
453
Application of support vector machine combined with K-nearest neighbors in solar flare and solar proton events forecasting Original Research Article
454
Application of Support Vector Machine method in Hyperspectral mapping of Ophiolite mélanges-a Case study from eastern Iran
455
Application of Support Vector Machine Regression for Predicting Critical Responses of Flexible Pavements
456
Application of support vector machines for fault diagnosis in power transmission system
457
Application of support vector machines in financial time series forecasting
458
Application of support vector machines in scour prediction on grade-control structures
459
Application of support vector machines in scour prediction on grade-control structures
460
Application of support vector machines to b،width reservation in sectored cellular communications
461
Application of support vector machines to corporate credit rating prediction
462
Application of support vector regression in predicting thickness strains in hydro-mechanical deep drawing and comparison with ANN and FEM
463
Application of supported liquid membrane probe for extraction and preconcentration of organotin compounds from environmental water samples
464
Application of supported liquid membrane probe for extraction and preconcentration of organotin compounds from environmental water samples Original Research Article
465
Application of supported liquid membranes containing methyl cholate in cyclohexane for the carrier-mediated transport of sugars Original Research Article
466
Application of support-vector-machine-based method for feature selection and classification of thyroid nodules in ultrasound images
467
Application of suppression subtractive hybridization (SSH) to cloning differentially expressed cDNA in Dunaliella salina (chlorophyta) under hyperosmotic shock
468
Application of surface acoustic waves for optimisation of biocompatibility of carboxymethylated dextran surfaces
469
Application of surface analytical and modification techniques to biomaterial research
470
Application of surface enzyme treatments using laccase and a hydrophobic compound to paper-based media
471
Application of surface impedance concept to inverse problems of reconstructing transient currents
472
Application of surface modifying macromolecules for the preparation of membranes for membrane distillation Original Research Article
473
Application of surface molecular imprinting adsorbent in expanded bed for the adsorption of Ni2+ and adsorption model
474
Application of surface photovoltage technique in photocatalysis studies on modified TiO2 photo-catalysts for photo-reduction of CO2
475
Application of surface plasmon resonance for the detection of carbohydrates, glycoconjugates, and measurement of the carbohydrate-specific interactions: A comparison with conventional analytical techniques. A critical review Review Article
476
Application of surface plasmon resonance sensing to studying elastohydrodynamic lubricant films
477
Application of surface plasmon resonance spectroscopy for adsorption studies of different types of components on poly(dimethylsiloxane) Original Research Article
478
Application of Surface Plasmon Resonance toward Studies of LowMolecular-Weight Antigen–Antibody Binding Interactions
479
Application of surface response analysis to the optimisation of nitric passivation of cp titanium and Ti6Al4V
480
Application of surface response analysis to the optimization of penicillin acylase purification in aqueous two-phase systems
481
Application of surfacederived attributes in determining boundaries of potentialfield sources
482
Application of surfaces of ultimate strength for thin-walled beams
483
Application of surfactant assisted dispersive liquid–liquid microextraction as an efficient sample treatment technique for preconcentration and trace detection of zonisamide and carbamazepine in urine and plasma samples
484
Application of surfactant assisted dispersive liquid–liquid microextraction for sample preparation of chlorophenols in water samples
485
Application of surfactant modified zeolite membrane electrode towards potentiometric determination of perchlorate
486
Application of surfactants and microemulsions to the extraction of pyrene and phenanthrene from soil with three different extraction methods Original Research Article
487
Application of surge arresters for the protection of SF6 substations
488
Application of surrogate based particle swarm optimization to the reliability-based robust design of composite pressure vessels
489
Application of surrogate methods for assessing the bioavailability of PAHs in sediments to a sediment ingesting bivalve
490
Application of survival analysis methods to long-term care insurance
491
Application of Survival Tree Model in Determining Affecting Factors in Breastfeeding Duration
492
Application of sustainability indicators, soil organic matter and electrical conductivity, to resource management in the northern grains region
493
Application of sustainable development concepts to an alluvial mineral extraction project in Lower Caroni River, Venezuela
494
APPLICATION OF SVD NOISE-REDUCTION TECHNIQUE TO PCA BASED RADAR TARGET RECOGNITION
495
Application of SVM and ANN for image retrieval
496
Application of SVM and ANN for intrusion detection
497
Application of SVM for investigation of factors affecting compressive strength and consistency of geopolymer concretes
498
Application of SVM on satellite images to detect hotspots in Jharia coal field region of India Original Research Article
499
Application of SVM to predict membrane protein types
500
Application of SVM-RFE on EEG signals for detecting the most relevant scalp regions linked to affective valence processing
501
Application of Swarm Based Optimization Algorithms for Solving Dynamic Economic Load Dispatch Problem
502
Application of SWAT model to investigate nitrate leaching in Hamadan–Bahar Watershed, Iran
503
Application of SWAT model to simulate nitrate and phosphate leaching from agricultural lands to the rivers
504
Application of sweet sorghum for biodiesel production by heterotrophic microalga Chlorella protothecoides
505
Application of switchable glazing to high-rise residential buildings in Hong Kong
506
Application of switched adaptive system to load forecasting
507
Application of SYBR green real-time PCR assay for specific detection of Salmonella spp. in dairy farm environmental samples
508
Application of symbolic computer algebra in high-level data-flow synthesis
509
Application of symbolic data analysis for structural modification assessment
510
Application of symbolic dynamics to characterize coordinated activity in the context of biological neural networks
511
Application of symbolic mathematics in modelling fire for providing a safe environment
512
Application of symmetric fuzzy linear programming in life cycle assessment
513
Application of symmetric indirect Trefftz method to free vibration problems in 2D
514
Application of symmetrized covariances in space confliction prediction Original Research Article
515
Application of syn-[2.5]Metacyclophane to the Extended Biaryl Structure by Suzuki Coupling Reaction
516
APPLICATION OF SYNCHRONOUS AVERAGING TO VIBRATION MONITORING OF ROLLING ELEMENT BEARINGS
517
Application of synchronous fluorescence scan spectroscopy for size dependent simultaneous analysis of CdTe nanocrystals and their mixtures
518
Application of synchrotron microtomography for pore structure characterization of deteriorated cementitious materials due to leaching
519
Application of synchrotron radiation for the study of nonstoichiometric oxygen-permeable perovskites by means of X-ray diffraction
520
Application of synchrotron radiation for the study of nonstoichiometric oxygen-permeable perovskites by means of X-ray diffraction
521
Application of synchrotron radiation to ablation of frozen acetone targets
522
Application of synchrotron radiation to analyze the precipitation in ODS materials before irradiation in Fe–9%Cr single grain of powder and consolidated Fe–18%Cr
523
Application of synchrotron radiation to in situ characterization of catalysts
524
Application of synchrotron X-ray diffraction and nanoindentation for the determination of residual stress fields around scratches Original Research Article
525
Application of synchrotron X-ray fluorescent analysis to studies of the records of paleoclimates of Eurasia stored in the sediments of Lake Baikal and Lake Teletskoye
526
Application of synchrotron X-ray fluorescent analysis to studies of the records of paleoclimates of Eurasia stored in the sediments of Lake Baikal and Lake Teletskoye
527
Application of synopsys’ taurus TCAD in developing CMOS fabrication process modules
528
Application of synoptic weather typing to an investigation of nocturnal ozone concentration at a maritime location, New Zealand
529
Application Of Synthesised Zeolite A From Kankara Kaolin For Solar Adsorption Refrigeration
530
Application of Synthesized Nanoscale Zero-Valent Iron in the Treatment of Dye Solution Containing Basic Yellow 28
531
APPLICATION OF SYNTHETIC BANDWIDTH APPROACH IN SAR POLAR FORMAT ALGORITHM USING THE DERAMP TECHNIQUE
532
Application of synthetic fluid inclusions to simultaneous temperature–pressure logging in high-temperature (sub- to supercritical) geothermal systems
533
Application of synthetic polymers as adsorbents for the removal of cadmium from aqueous solutions: Batch experimental studies
534
Application of system dynamics and fuzzy logic to forecasting of municipal solid waste Original Research Article
535
Application of System Dynamics in Forecasting: A Systematic Review
536
Application of System Dynamics model as decision making tool in urban planning process toward stabilizing carbon dioxide emissions from cities
537
Application of system identification modelling to solar hybrid systems for predicting radiation, temperature and load
538
Application of system identification techniques to aircraft gas turbine engines
539
Application of System of Rice Intensification (SRI) Methods on Productivity of Jasmine Rice Variety in Southern Iraq
540
Application of systems biology for bioprocess development
541
Application of Systems Modeling Language (SySML) for Cognitive Work Analysis in Systems Engineering Design Process
542
Application of Systems Thinking in Health: Opportunities for Translating Theory into Practice; Comment on “Constraints to Applying Systems Thinking Concepts in Health Systems: A Regional Perspective f
543
APPLICATION OF TABU SEARCH FOR SOLVING THE
544
Application of tabu search in optimal system design and operation of MRT power supply systems
545
Application of tabu search strategy for finding low energy structure of protein
546
Application of Taguchi and regression analysis on surface roughness in machining hardened AISI D2 steel
547
Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene
548
Application of Taguchi approach to optimize of FSSW parameters on joint properties of dissimilar AA2024-T3 and AA5754-H22 aluminum alloys
549
Application of Taguchi Design and Response Surface Methodology for Improving Conversion of Isoeugenol into Vanillin by Resting Cells of Psychrobacter sp. CSW4
550
Application of Taguchi Design for Optimization of Corrosion Behavior of Amorphous Silica Thin Film Deposited Through Sol-Gel Dipping Technique
551
Application of Taguchi experimental design in optimization of desalination using purified carbon nanotubes as adsorbent
552
Application of Taguchi method in optimization of cervical ring cage
553
Application of Taguchi method in optimization of desalination by vacuum membrane distillation Original Research Article
554
Application of Taguchi Method in Optimization of Shallow PN Junction Formation
555
Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning
556
Application of Taguchi method in the optimization of end milling parameters
557
Application of taguchi method in the optimization of wastewater treatment using spiral-wound reverse osmosis element
558
Application of Taguchi method on optimization of testing parameters for erosion of glass fiber reinforced epoxy composite materials
559
Application of Taguchi method to determine the optimal water depth and glass cooling rate in solar stills
560
Application of Taguchi Method to Investigate the Effects of Process Factors on the Production of Industrial Piroxicam Polymorphs and Optimization of Dissolution Rate of Powder
561
Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3
562
Application of Taguchi Methodology in adsorption of Malachite Green dye using chemically enhanced Bambusa Tulda (Indian Timber Bamboo)
563
Application of Taguchi methods to DEM calibration of bonded agglomerates
564
Application of Taguchi optimization technique in determining aluminum to brass friction stir welding parameters
565
Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part
566
Application of Taguchi technique to investigation of geometry and position of V-ring indenter in fine-blanking process
567
Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites
568
Application of Taguchi techniques to study friction and wear properties of MoS2 coatings deposited on laser textured surface
569
Application of Taguchi’s Design of Experiment in Performance Analysis of Destination Sequence Distance Vector (DSDV) Routing Protocol in Mobile Ad Hoc Networks
570
Application of Taguchi’s experimental design method for optimization of Acid Red 18 removal by electrochemical oxidation process
571
Application of Taguchi’s methods to investigate some factors affecting microporosity formation in A360 aluminium alloy casting
572
APPLICATION OF TAGUCHIʹS OPTIMIZATION METHOD AND SELF-ADAPTIVE DIFFERENTIAL EVOLUTION TO THE SYNTHESIS OF LINEAR ANTENNA ARRAYS
573
Application of tailor-made membranes in a multi-stage process for the purification of sweeteners from Stevia rebaudiana Original Research Article
574
Application of Talc Formulations of Pseudomonas fluorescens Migula and Trichoderma viride Pers. ex S.F. Gray Decrease the Sheath Blight Disease and Enhance the Plant Growth and Yield in Rice
575
Application of Tandem Cascade to Design of Fan Stator with Supersonic Inflow
576
Application of tandem column solid phase extraction and flame atomic absorption spectrometry for the determination of inorganic and organically bound forms of iron in wine
577
Application of tandem Ugi reaction/ring-closing metathesis in multicomponent synthesis of unsaturated nine-membered lactams
578
Application of tartarate derived bidentate bioxazolines in enantioselective addition of terminal alkynes to imines
579
Application of Task Complexity Along +/- single Task Dimension and its Effect on Fluency in Writing Performance of Iranian EFL Learners
580
Application of taste sensing system for characterisation of enzymatic hydrolysates from shrimp processing by-products
581
Application of Tau Approach for Solving Integro-Differential Equations with a Weakly Singular Kernel
582
Application of Taylor transformation to nonlinear predictive control problem
583
Application of Taylor transformation to optimize rectangular fins with variable thermal parameters
584
APPLICATION OF TAYLOR TRANSFORMATION TO THE THERMAL STRESSES IN ISOTROPIC ANNULAR FINS
585
Application of TDA technique to estimate the hydrocarbon saturation using MRIL Data: A Case study for a Southern Iranian Oilfield
586
Application of T-DNA insertional mutagenesis for improving cellulase production in the filamentous fungus Trichoderma reesei
587
Application of TDR Technology to Water Content Monitoring of Capillary Barriers Made of Pulp and Paper Residues
588
Application of TDR Technology to Water Content Monitoring of Capillary Barriers Made of Pulp and Paper Residues
589
Application of TDR to water level measurement
590
Application of TDS technique to developed reservoirs
591
Application of TDS technique to developed reservoirs
592
APPLICATION OF TECHNIQUES ASSISTING THE COMMUNICATION WITH DEMENTIA PATIENTS BY STUDENTS – SOCIAL WORK
593
Application of Technology and Science of Intellectual Property Rights in the Papua Traditional Culture Perspective
594
application of technology in educating nursing students during covid-19: a systematic review
595
Application of telluric-telluric profiling combined with magnetotelluric and self-potential methods to geothermal exploration in the Fujian Province, China
596
Application of temperature fuzzy controller in an indirect resistance furnace
597
Application of Temperature Inference Method Based on Soft Sensor Technique to Plate Production Process Original Research Article
598
Application of temperature modified titanate nanotubes for removal of an azo dye from water in a hybrid photocatalysis-MD process
599
Application of Temperature Parallel Simulated Annealing to Loading Pattern Optimizations of Pressurized Water Reactors
600
Application of temperature rising elution fractionation in polyolefins
601
Application of temperature-controlled attenuated total reflectance-mid-infrared (ATR-MIR) spectroscopy for rapid estimation of butter adulteration
602
Application of temperature-induced phase partition of proteins for the detection of smoked paprika adulteration by free zone capillary electrophoresis (FZCE)
603
Application of temperature-programmed oxidation, multinuclear MAS NMR and DRIFT spectroscopy to the surface characterization of modified silica nanoparticles
604
Application of temperature-programmed reduction to the characterization of anionic clays
605
Application of temporal temperature gradient gel electrophoresis for characterisation of fungal endophyte communities of Salix caprea L. in a heavy metal polluted soil Original Research Article
606
Application of tephrochronology to the timing and correlation of palaeoceanographic events recorded in Holocene and Late Glacial shelf sediments off North Iceland
607
Application of ternary diagrams in the design of methanation systems
608
Application of TERRA/MODIS images, TM images and weather data to assess the effect of cold damage on rice yield
609
Application of test reactions to study micromixing in the rotor-stator mixer (test reactions for rotor-stator mixer)
610
Application of tests of goodness of fit in determining the probability density function for spacing of steel sets in tunnel support system
611
Application of tetracyclic polyprenoids as indicators of input from fresh-brackish water environments
612
Application of tetramer technology in studies on autoimmune diseases
613
Application of tetraoxadiaza-crown ether derivatives as chiral selector modifiers in capillary electrophoresis
614
Application of Text Mining to Extract Hotel Attributes and Construct Perceptual Map of Five Star Hotels from Online Review: Study of Jakarta and Singapore Five-Star Hotels
615
Application of Text Summarization techniques to the Geographical Information Retrieval task
616
Application of Texture Analysis Method for Classification of Benign and Malignant Thyroid Nodules in Ultrasound Images
617
Application of Texture Analysis Method for Classification of Benign and Malignant Thyroid Nodules in Ultrasound Images
618
Application of texture image analysis for the classification of bovine meat
619
Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y Original Research Article
620
Application of TG-DTA to study of Ancient Potteries from Kaveripakkam, Vellore district, Tamilnadu, India
621
Application of TG–DTA to the study of Amynteon lignites, northern Greece
622
Application of TG–DTG analysis and centrifugal separation in the investigation of less combustible constituents in coals
623
Application of TG-FTIR to study SO2 evolved during the thermal decomposition of coal-derived pyrite
624
Application of TG–FTIR to the determination of organic oxygen and its speciation in the Argonne premium coal samples
625
Application of TG-FTIR to the determination of oxygen content of coals
626
Application of thallium(I) as an internal standard redox process in voltammetric measurements
627
Application of Thau Observer for Fault Detection of Micro Parallel Plate Capacitor Subjected to Nonlinear Electrostatic Force
628
APPLICATION OF THE "EQUIVALENT CABLE BUNDLE METHOD" FOR MODELING CROSSTALK OF COMPLEX CABLE BUNDLES WITHIN UNIFORM STRUCTURE WITH ARBITRARY CROSS-SECTION
629
Application of the .G0 G /-expansion method to (3 C1)-dimensional nonlinear evolution equations
630
Application of the `double spikeʹ technique to Pb-isotope geochronology
631
Application of the ‘waste to water’ concept to Sharm El Sheikh through a CFD simulation Original Research Article
632
Application of the “Hybrid Approach” to Chronic Total Occlusions in Patients With Previous Coronary Artery Bypass Graft Surgery (from a Contemporary Multicenter US Registry)
633
Application of the “MBWC” two-dimensional position readout technique to a multiwire proportional counter
634
Application of the “threshold of toxicological concern” to derive tolerable concentrations of “non-relevant metabolites” formed from plant protection products in ground and drinking water
635
Application of the “trimethyl lock”1 to Ganciclovir, a pro-prodrug with increased oral bioavailability
636
Application of the “VARICOL” process to the separation of the isomers of the SB-553261 racemate
637
Application of the 1,2-Dihydroxybenzene-3,5-Disulfonic Acid for Separation and Preconcentration of Trace Iron and Determination by Eight Order Derivative Spectrophotometry
638
Application of the 15N technique to determine the contributions of nitrification and denitrification to the flux of nitrous oxide from aerated pig slurry
639
Application of the 29Si NMR 2D INEPT spin-flip J-resolved technique to the structural analysis of trimethylsilylated glycosides
640
Application of the 2-D constant strain assumption to FEM elements consisting of an arbitrary number of nodes
641
Application of the 3-D boundary element method to delaminated composite structures
642
Application of the 6-aminoquinolyl-N-hydroxysccinimidyl carbamate (AQC) reagent to the RP-HPLC determination of amino acids in infant foods
643
Application of the accelerated failure time model to lung cancer data
644
Application of the accident consequence analysis in the emergency system design of an SI cycle hydrogen production plant
645
Application of the accurate mass and time tag approach in studies of the human blood lipidome
646
Application of the acoustic emission technique to characterise liquid transfer in a porous ceramic during drying
647
Application of the adaptive cross approximation technique for the coupled BE-FE solution of symmetric electromagnetic problems
648
APPLICATION OF THE ADAPTIVE MATRIX FILTER TO INVERSE HEAT CONDUCTION PROBLEMS
649
Application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Sobol Approaches for Modeling and Sensitivity Analysis of the Biosorption of Triglyceride from the Blood Serum
650
Application of the addition of triorganozincates to N-(tert-butanesulfinyl)imines to the enantioselective synthesis of α-amino acids
651
Application of the ADM1 model to advanced anaerobic digestion
652
Application of the Adomian decomposition method for the Fokker–Planck equation
653
Application of the adsorption effect of optical fibres for the determination of critical micelle concentration
654
Application of the airflow control by electro-hydrodynamic actuator
655
Application of the AMBUR R package for spatio-temporal analysis of shoreline change: Jekyll Island, Georgia, USA
656
Application of the Analytic Hierarchy Process (AHP) in Multi- Criteria Analysis of the Selection of Cranes
657
Application of the analytic hierarchy process (AHP) in multi-criteria analysis of the selection of intelligent building systems
658
Application of the analytic hierarchy process in agriculture in developing countries
659
Application of the analytic hierarchy process to compare alternatives for the long-term management of surplus mercury
660
Application of the Analytic Hierarchy Process to irrigation project improvement: Part I. Impacts of irrigation project internal processes on crop yields
661
Application of the Analytic Hierarchy Process to irrigation project improvement: Part II. How professionals evaluate an irrigation project for its improvement
662
Application of the analytical hierarchy process (AHP) for landslide susceptibility mapping: A case study from the Tinau watershed, west Nepal
663
Application of the analytical hierarchy process in the selection of desalination plants Original Research Article
664
Application of the analytical hierarchy process to establish health care waste management systems that minimise infection risks in developing countries
665
Application of the Anderko–Pitzer EoS to the calculation of thermodynamical properties of systems involved in the supercritical water oxidation process
666
Application of the ANOVA-PCA method to stability studies of reference materials Original Research Article
667
Application of the Ant Colony Search Algorithm to Reactive Power Pricing in an Open Electricity Market
668
Application of the antibunching in dye fluorescence: measuringthe excitation rates in solution Original Research Article
669
Application of the Antipodal Grasp Theorem to Cable-Driven Robots
670
Application of the aqueous two-phase systems of ethylene and propylene oxide copolymer-maltodextrin for protein purification
671
Application of the arbitrarily primed polymerase chain reaction for the detection of DNA damage
672
Application of the Arbitrary Lagrangian Eulerian formulation to the numerical simulation of cold roll forming process
673
Application of the arc-length method for the stability analysis of solid unreinforced masonry walls under lateral loads
674
Application of the arc-length method in nonlinear frequency response
675
Application of the area under the curve of carboplatin in predicting toxicity and efficacy
676
Application of the Armstrong friction model to study dynamic transient response in Tworkpiece–fixture systems
677
Application of the Arrhenius equation to solid state kinetics: can this be justified?
678
Application of the assay of aflatoxins by liquid chromatography with fluorescence detection in food analysis
679
Application of the asymmetric aminohydroxylation reaction for the syntheses of HIV-protease inhibitor, hydroxyethylene dipeptide isostere and γ-amino acid derivative
680
Application of the Australian river bioassessment system (AUSRIVAS) in the Brantas River, East Java, Indonesia
681
Application of the authigenic 10Be/9Be dating method to continental sediments: Reconstruction of the Mio-Pleistocene sedimentary sequence in the early hominid fossiliferous areas of the northern Chad Basin
682
APPLICATION OF THE AUTO- AND CROSS-POWER SPECTRA TO HYDRO- AND AEROACOUSTICS
683
Application of the average field method to the prediction of stable shapes of coherent precipitates under uniaxial stresses
684
Application of the average field method to the prediction of stable shapes of coherent precipitates under uniaxial stresses
685
Application of the Avrami Theory for Wax Crystallisation of Synthetic Crude Oil
686
Application of the Avrami, Tobin, Malkin, and Urbanovici–Segal macrokinetic models to isothermal crystallization of syndiotactic polypropylene
687
Application of the aza-Wittig reaction to the synthesis of pyrazinothienotriazolopyrimidinones: a new tetracyclic ring system
688
Application of the background-field method to the electroweak standard model Original Research Article
689
Application of the Baheʹs pseudolattice theory to water–1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) mixtures at 298.15 K: Part II. Acidity scales
690
Application of the Baheʹs pseudolattice-theory to water—1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4) mixtures at 298.15 K: Part I. Autoprotolysis constants
691
Application of the ballistic plasmatron of superadiabatic compression for surface treatment
692
Application of the ball-spine algorithm to design an axial-flow comprssor blade
693
Application of the Barker lattice theory to modeling of thermodynamic properties of PbO–B2O3–SiO2 melts
694
Application of the Base Isolation Systems to a Reinforced Concrete Building and Cost Analysis
695
Application of the bayer immuno I AFP and HCG-ER assays in a multi-centre maternal serum screening program
696
Application of the Bayesian calibration methodology for the parameter estimation in CoupModel
697
Application of the Beck model to stock markets: Value-at-Risk and portfolio risk assessment
698
Application of the Bellman and Zadeh's principle for identifying the fuzzy decision in a network with intermediate storage
699
Application of the BEM for numerical modelling of continuous casting
700
Application of the BEM in biopotential problems
701
Application of the BEM to chromium electroplating simulation and to identification of experimental polarisation laws
702
Application of the BHQ benzannulation reaction to the synthesis of benzo-fused coumarins
703
Application of the bilinear compression function to calorimetry
704
Application of the bilinear compression function to calorimetry
705
Application of the biomarker responses in scallop (Chlamys farreri) to assess metals and PAHs pollution in Jiaozhou Bay, China
706
Application of the biorefinery concept to produce l-lactic acid from the soybean vinasse at laboratory and pilot scale
707
Application of the biotin–dUTP chromosome labelling technique to study the role of 5-bromo-2′-deoxyuridine in the formation of UV-induced sister chromatid exchanges in CHO cells
708
Application of the bispectrum for detection of small nonlinearities excited sinusoidally
709
Application of the blackbody radiation source for characteristics measurement of submillimeter low-temperature direct detectors
710
Application of the blackbody radiation source for characteristics measurement of submillimeter low-temperature direct detectors
711
Application of the block backward differential formula for numerical solution of Volterra integro-differential equations
712
Application of the boundary element method for the numerical modelling of the solidification of cylindrical and spherical castings
713
Application of the boundary element method to rubber-like elasticity
714
Application of the boundary integral equation method to the coupled bending-torsional vibrations of elastic beams
715
Application of the boundary-domain element method to the pre/post-buckling problem of von Kármán plates
716
Application of the boundary-domain integral equation in elastic inclusion problems
717
Application of the boundary-layer theory to the analysis of composite shells of revolution
718
Application of the Box-Behnken Design for Optimizing Biodiesel Output from Castor Oil: Analysis and Characterization
719
Application of the Box–Behnken design to the optimization of process parameters in foam cup molding
720
Application of the Box-Wilson experimental design method for the spherical oil agglomeration of coal
721
Application of the bridgehead fragments for the design of conformationally restricted melatonin analogues
722
Application of the broad-spectrum bacteriocin enterocin AS-48 to inhibit Bacillus coagulans in canned fruit and vegetable foods
723
Application of the BTEM family of algorithms to reconstruct individual UV–Vis spectra from multi-component mixtures
724
Application of the Building Environmental Performance Model (BEPM) in Hong Kong
725
Application of the bulk properties of a silicone PSA to peeling
726
Application of the C4.5 classifier to building an expert system for ion chromatography
727
Application of the Callaway theory to analysis of thermal transport by phonons in ceramic and biomorphic composites
728
Application of the CALPHAD approach to Mg-alloys design
729
Application of the CALPHAD approach to Mg-alloys design
730
Application of the CALPHAD method to predict the thermal conductivity in dielectric and semiconductor crystals
731
Application of the CAMEL process simulator to the dynamic simulation of gas turbines
732
Application of the Campbell–Magaard theorem to higher-dimensional physics
733
Application of the can technique and radon gas analyzer for radon exhalation measurements
734
Application of the CARLIT index along a biogeographical gradient in the Alboran Sea (European Coast)
735
Application of the Catalytic Friedel-Crafts Acylation Reaction and Regioselectivity Correlations
736
Application of the cause–consequence diagram method to static systems
737
Application of the cause–consequence diagram method to static systems
738
Application of the cavity model to lossy power-return plane structures in printed circuit boards
739
Application of the CBM-CFS3 model to estimate Italyʹs forest carbon budget, 1995–2020
740
Application of the CBM-CFS3 model to estimate Italyʹs forest carbon budget, 1995–2020
741
Application of the CBSM method for selected ternary and pseudo-ternary L + L systems, and novel criterion for extractants capability
742
Application of the CEN (European Committee for Standardization) small punch creep testing code of practice to a representative repair welded P91 pipe
743
Application of the Central Encryption System in the Dynamic Secret Sharing Scheme (II)
744
Application of the Central Limit Theorem in microbial risk assessment: High number of servings reduces the Coefficient of Variation of food-borne burden-of-illness
745
APPLICATION OF THE CENTRE MANIFOLD THEORY IN NON-LINEAR AEROELASTICITY
746
Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. I. Plane flow between two parallel plates
747
Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. II. Slip and jump coefficients
748
Application of the Cercignani–Lampis scattering kernel to calculations of rarefied gas flows. III. Poiseuille flow and thermal creep through a long tube
749
Application of the Characteristic Bisection Method for locating and computing periodic orbits in molecular systems Original Research Article
750
Application of the characteristic root index model to the estimation of N-octanol/water partition coefficients. polychlorinated biphenyls
751
Application of the charged polymeric materials as additional permselective membranes for improvement of the performance characteristics of urea-sensitive ENFETs 2. Urea determination in blood serum
752
Application of the Chebyshev polynomial in solving Fredholm integral equations
753
Application of the Chebyshev pseudospectral method to van der Waals fluids
754
Application of the chemical vapor infiltration and reaction (CVI-R) technique for the preparation of highly porous biomorphic SiC ceramics derived from paper
755
Application of the chemical vapor-etching in polycrystalline silicon solar cells
756
Application of the chemiluminescence systems to evaluate the role of Fcγ and complement receptors in stimulating the oxidative burst in neutrophils
757
Application of the Cheng-Finnie method to the calculation of stress intensity factors in thin-walled pipes with long axial cracks with allowance for geometric nonlinearity
758
Application of the chiral base desymmetrisation of imides to the synthesis of the alkaloid jamtine and the antidepressant paroxetine
759
Application of the chromatographic retention index system for the estimation of the calibration constants of permeation passive samplers with polydimethylsiloxane membranes
760
Application of the CIE test cases to assess the accuracy of lighting computer programs
761
Application of the cluster variation method to ε-Fe2N1-z and ζ-Fe2N: ordering of interstitial atoms Original Research Article
762
Application of the cluster/site approximation to fcc phases in Ni-Al-Cr system
763
Application of the cluster/site approximation to fcc phases in Ni–Al–Cr system Original Research Article
764
Application of the cluster/site approximation to fcc phases in the Ni–Al–Cr–Re system Original Research Article
765
Application of the cluster/site approximation to the calculation of coherent interphase boundary energies
766
Application of the cluster/site approximation to the calculation of coherent interphase boundary energies Original Research Article
767
Application of the cluster/site approximation to the calculation of multicomponent alloy phase diagrams
768
Application of the cluster/site approximation to the calculation of multicomponent alloy phase diagrams Original Research Article
769
Application of the cluster-site approximation (CSA) model to the f.c.c. phase in the Ni–Al system Original Research Article
770
Application of the CN Intermediate-term Earthquake Prediction Algorithm to the Area of the Southern External Dinarides
771
Application of the coastal and marine ecological classification standard using satellite-derived and modeled data products for pelagic habitats in the Northern Gulf of Mexico
772
Application of the cohesive model for predicting the residual strength of a large scale fuselage structure with a two-bay crack
773
Application of the cohesive zone model for the evaluation of stiffness losses in a rotor with a transverse breathing crack
774
Application of the Cole-Hopf transformation for finding the analytical solutions of the dynamics of a gravitating system of spherical gas-dust cloud
775
APPLICATION OF THE COLLOCATION METHOD IN THREE DIMENSIONS TO A MODEL SEMICONDUCTOR PROBLEM
776
Application of the colloidal stability of TiO2 particles for recovery and reuse in solar photocatalysis
777
Application of the colorimetric method to chloride diffusion evaluation in concrete structures
778
Application of the combined nonlinear-condensation transformation to problems in statistical analysis and theoretical physics Original Research Article
779
Application of the combined RWG basis functions to the MFIE for the scattering analysis of small sharp-edged objects
780
Application of the comet and micronucleus assays to butterfish (Pholis gunnellus) erythrocytes from the Firth of Forth, Scotland
781
Application of the competing risks analysis to fracture toughness of silicon-killed C-Mn plate steels
782
Application of the complete multiple reciprocity method for 3D impedance extraction with multiple frequency points
783
Application of the complex network method in solid-state sintering
784
Application of the complex step method to chemistry-transport modeling
785
Application of the componential method for ecological footprint calculation of a Chinese university campus
786
Application of the computational method for predicting NOx reduction within large scale coal-fired boiler
787
Application of the computational theory of perceptions to human gait pattern recognition
788
Application of the computer code TOUGH2 to the simulation of supercritical conditions in geothermal systems
789
Application of the concept of acoustic influence coefficients for the optimization of a vehicle roof
790
Application of the Concept of Defamiliarization in Translation Studies: Case Studies of the Translation of Film Titles
791
Application of the concept of evolving structure tensors to the modeling of initial and induced anisotropy at large deformation
792
Application of the concept of traceability to the management of nuclear data
793
Application of the concept synthetic lethality toward anticancer therapy: A promise fulfilled?
794
Application of the concepts of fracture mechanics to the failure of conductive cracks in piezoelectric ceramics
795
Application of the conductimetry to the study of the transformation of KCl and Na2SO4 into K2SO4 between 5 and 30 °C
796
Application of the constant stoichiometry grouping concept to the Raman spectra of Pb(PO3)2-TeO2 glasses
797
Application of the constrained finite strip method for the buckling design of cold-formed steel columns and beams via the direct strength method
798
Application of the Constrained Interpolation Profile (CIP) scheme to two-dimensional single-phase hydrothermal reservoir simulations
799
Application of the Continuity Equation and Valve Resistance to the Evaluation of St. Jude Medical Prosthetic Aortic Valve Dysfunction
800
Application of the continuous variation method to cooperative interactions: mechanism of Fe(II)–ferrozine chelation and conditions leading to anomalous binding ratios Original Research Article
801
Application of the continuous wavelet transform on the free vibrations of a steel–concrete composite railway bridge
802
Application of the control methods for radiant floor cooling system in residential buildings
803
Application of the controllable series compensator in damping power system oscillations
804
Application of the core-shell-type granulation process for the preparation of compression molding granules containing fibrous material and powders
805
Application of the correlation theory of thermal regime and thermal radio emission for atmosphere
806
Application of the correlation-crystal-field delta-function model in analyses of Pr3+(4f2) energy-level structures in crystalline hosts Original Research Article
807
Application of the Cosford cross-coupling protocol for the stereoselective synthesis of (R)-(+)-goniothalamin, (R)-(+)-kavain and (S)-(+)-7,8-dihydrokavain
808
Application of the cos-Fourier expansion to data transformation between different latitude–longitude grids
809
Application of the COSMO-SAC-BP Solvation Model to Predictions of Normal Boiling Temperatures for Environmentally Significant Substances
810
Application of the coupled channels approach to the intermediate coupling description of photodisintegration of 1d2s-shell nuclei Original Research Article
811
Application of the coupled MIKE SHE/MIKE 11 modelling system to a lowland wet grassland in southeast England
812
Application of the coupled model to the Somme river basin
813
Application of the covering function method in quantum hydrodynamics for two-dimensional scattering problems
814
Application of the CPA equation of state to glycol/hydrocarbons liquid–liquid equilibria
815
Application of the CPA equation of state to organic acids
816
Application of the CPA equation of state to reservoir fluids in presence of water and polar chemicals
817
Application of the Cplex-isoelectronic theory to electrocyclisations, sigmatropic rearrangements, cheletropic reactions and antiaromaticity: Consistent with Santilliʹs hadronic chemistry
818
Application of the crack compliance method to long axial cracks in pipes with allowance for geometrical nonlinearity and shape imperfections (dents)
819
Application of the Cramer rule in the solution of sparse systems of linear algebraic equations
820
Application of the cross entropy method to the GLVQ algorithm
821
Application of the Cubic-Plus-Association (CPA) Equation of State to Complex Mixtures with Aromatic Hydrocarbons
822
Application of the Cubic-Plus-Association (CPA) Equation of State to Cross-Associating Systems
823
Application of the cubic-plus-association (CPA) equation of state to model the fluid phase behaviour of binary mixtures of water and tetrahydrofuran
824
Application of the Cubic-Plus-Association Equation of State to Mixtures with Polar Chemicals and High Pressures
825
Application of the cyclic phase transformation concept for determining the effective austenite/ferrite interface mobility
826
Application of the cyclic phase transformation concept for investigating growth kinetics of solid-state partitioning phase transformations
827
Application of the cyclic semi-integral voltammetry and cyclic semi-differential voltammetry to the determination of the reduction mechanism of a Ni–porphyrin
828
Application of the Danckwerts method in a bubble column: Effects of surfactants on mass transfer coefficient and interfacial area
829
Application of the Dang-Van criterion for life determination under uniaxial random tension–compression with different mean values
830
Application of the Davidon-Fletcher-Powell algorithm to the resolution of multicomponent mixtures using UV-vis spectrophotometry
831
Application of the DDM and fracture mechanics model on the simulation of rock breakage by mechanical tools
832
Application of the decomposition method to identify the distributed parameters of an elliptical equation
833
Application of the decomposition technique for forecasting the load of a large electric power network
834
Application of the deletion/substitution/addition algorithm to selecting land use regression models for interpolating air pollution measurements in California
835
Application of the denaturing gradient gel electrophoresis (DGGE) technique as an efficient diagnostic tool for ciliate communities in soil
836
Application of the density functional method to study phase transitions in an associating Lennard-Jones fluid adsorbed in energetically heterogeneous slit-like pores
837
Application of the density functional theory derived orbital-free embedding potential to calculate the splitting energies of lanthanide cations in chloroelpasolite crystals
838
Application of the design of experiments procedure to the behaviour of adhesively bonded joints with plastically deformable adherends to enable further understanding of strain rate sensitivity
839
Application of the detrended fluctuation analysis (DFA) method for describing cloud breaking
840
Application of the deuterium tracing method for the estimation of tree sap flow and stand transpiration of a beech forest (Fagus silvatica L.) in a mountainous Mediterranean region
841
Application of the DFT-based embedding scheme using an explicit functional of the kinetic energy to determine the spin density of Mg+ embedded in Ne and Ar matrices
842
Application of the dibromohydroxyphenylfluorone–molybdenum(VI) complex to the sensitive spectrophotometric determination of protein Original Research Article
843
Application of the Difference Gaussian Rules to Solution of Hyperbolic Problems
844
Application of the Difference Gaussian Rules to Solution of Hyperbolic Problems: II. Global Expansion
845
Application of the different boundary elements to spur gears Original Research Article
846
Application of the differential colorimetry and polyphenolic profile to the evaluation of the chromatic quality of Tempranillo red wines elaborated in warm climate. Influence of the presence of oak wood chips during fermentation
847
Application of the differential equations method for identifying communities in sparse networks Original Research Article
848
Application of the differential impedance analysis for investigation of electroceramics
849
Application of the differential transformation method for the solution of the hyperchaotic Rِssler system
850
Application of the differential transformation method to the solution of a damped system with high nonlinearity Original Research Article
851
Application of the Diffusion–Collision Model to the Folding of Three-helix Bundle Proteins
852
Application of the digital moiré method in fracture analysis of a cracked rubber sheet
853
APPLICATION OF THE DIRECT COMPLEX STIFFNESS METHOD TO ENGINE MOUNTS
854
Application of the direct Lyapunov method to improve damping of power swings by control of UPFC
855
Application of the direct quadrature method of moments to polydisperse gas–solid fluidized beds
856
Application of the discontinuity factor theory to accelerate routine rod worth calculations for modular HTRs Original Research Article
857
Application of the discontinuous spectral Galerkin method to groundwater flow
858
Application of the discrete element method for modeling of rock crack propagation and coalescence in the step-path failure mechanism
859
Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material
860
Application of the Discrete Element Method to crack propagation and crack branching in a vitreous dense biopolymer material
861
Application of the discrete Fourier transform to solving the Cauchy integral equation
862
Application of the dissipated energy criterion to predict fatigue crack growth of Type 304 stainless steel following a tensile overload
863
Application of the distance function to nonmarket valuation of environmental goods and services: An illustrative example
864
Application of the distinct element method and the extended finite element method in modelling cracks and coalescence in brittle materials
865
Application of the distributed activation energy model to the kinetic study of pyrolysis of the fresh water algae Chlorococcum humicola
866
Application of the distributed database (Data-Free-Way) on the analysis of mechanical properties in neutron irradiated 316 stainless steel
867
Application of the distributed dislocation technique for calculating cyclic crack tip plasticity effects
868
Application of the distribution of citations among publications in scientometric evaluations
869
Application of the DLVO theory for particle deposition problems
870
Application of the DNDC model to predict emissions of N2O from Irish agriculture
871
Application of the double intramolecular hetero-Michael addition (DIHMA) approach in spiroketal synthesis: total synthesis of (±)-(4S*,6S*)-4-hydroxy-1,7-dioxaspiro[5.5]undecane, a Dacus oleae olive fly pheromone
872
Application of the double Laplace Adomian decomposition method for solving linear singular one dimensional thermo-elasticity coupled system
873
Application of the Dozier retrieval to wildfire characterization: a sensitivity analysis
874
Application of the DRBEM to model ablation characteristics of a thrust vector control vane
875
Application of the DRS chip for fast waveform digitizing
876
Application of the DRS chip for fast waveform digitizing
877
Application of the DSC model for nonlinear analysis of reinforced concrete frames
878
Application of the DSC-Element method to flexural vibration of skew plates with continuous and discontinuous boundaries
879
Application of the DTC control in the photovoltaic pumping system
880
Application of the dual reciprocity boundary integral equation technique to solve the nonlinear Klein–Gordon equation Original Research Article
881
Application of the dual-CGPS concept to monitoring vertical land movements at tide gauges
882
Application of the dual-kinetic-balance sets in the relativistic many-body problem of atomic structure Original Research Article
883
Application of the Dubois-model using experimental synthetic aperture radar data for the determination of soil moisture and surface roughness
884
Application of the Duplex Reactor—An Unusual and Forgotten Technique to Reduce Short Circuit Duty
885
Application of the duplex TiN coatings to improve the tribological properties of Electro Hydrostatic Actuator pump parts
886
Application of the Dynamic Cone Penetrometer (DCP) for determination of the engineering parameters of sandy soils
887
Application of the dynamic Wilhelmy plate to identification of slippage at a liquid-liquid-solid three-phase line of contact
888
Application of the dynamical flexural resonance technique to industrial materials characterisation
889
Application of the dynamical flexural resonance technique to industrial materials characterisation
890
Application of the EBSD technique for the characterisation of deformation zones in metal cutting
891
Application of the edge of chaos domain of the Zhabotinskii CNN to explore insights to hydrothermal deposit-forming processes
892
Application of the effective potentials technique for investigation of two-dimensional electron mirrors with curvilinear axial trajectory
893
Application of the effective potentials technique for investigation of two-dimensional electron mirrors with curvilinear axial trajectory
894
Application of the EGEM model to predict ephemeral gully erosion in Sicily, Italy
895
APPLICATION OF THE ELASTIC BOUNDARY INDUCED BY SHEAR HISTORY ON SATURATED COHESIVE SOIL
896
Application of the electrochemical machining technique for the characterization of zinc coatings
897
Application of the electrodeposited multilayers amorphous wires in magnetometric sensors
898
Application of the electromeniscus phenomenon to carbon nanotube erection and surface modification
899
Application of the electron channeling contrast imaging technique to the study of dislocations associated with cracks in bulk specimens
900
Application of the electron channeling contrast imaging technique to the study of dislocations associated with cracks in bulk specimens
901
Application of the electron energy loss fine structure technique to the investigation of the Al Ag binary system
902
Application of the electron-counting method to low-Z elemental analysis
903
Application of the electron-counting method to low-Z elemental analysis
904
Application of the electronic nose for uremia diagnosis
905
Application of the electrostatic mean value theorem to electrostatic sensor electrodes
906
Application of the element free Galerkin method to the simulation of plane strain rolling
907
Application of the element-free Galerkin meshless method to 3-D fracture mechanics problems
908
Application of the Elevation and Residual Static Correction methods on a selected Seismic data of West Luhais area in the South of Iraq
909
Application of the elliptic conditional moment closure model to a two-dimensional nonpremixed methanol bluff-body flame
910
Application of the EM algorithm for the multitarget/multisensor tracking problem
911
Application of the emission inventory model TEAM: Uncertainties in dioxin emission estimates for central Europe
912
Application of the EMIT 2000 Tacrolimus assay on the Abbott Architect c8000 high volume clinical chemistry analyzer
913
Application of the empirical mode decomposition and wavelet transform to seismic reflection frequency attenuation analysis
914
Application of the EN 1788 European standard for the control of saffron, pepper and blends
915
APPLICATION OF THE END POINT POLYMERASE CHAIN REACTION METHOD TO THE DETECTION OF CERTAIN MILK-BORNE BACTERIA
916
Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steel
917
Application of the endurance time method in seismic analysis of concrete gravity dams
918
Application of the energy balance method to a nonlinear oscillator arising in the microelectromechanical system (MEMS)
919
Application of the energy flow method to vibration control of buildings with multiple tuned liquid dampers
920
Application of the energy release rate approach for delamination growth in Glare
921
Application of the Englert–Schwinger model to the equation of state and the fullerene molecule
922
APPLICATION OF THE ENVELOPE AND WAVELET TRANSFORM ANALYSES FOR THE DIAGNOSIS OF INCIPIENT FAULTS IN BALL BEARINGS
923
Application of the environmental isotope δ18O to study water flow in unsaturated soils planted with different crops: Case study of a weighable lysimeter from the research field in Neuherberg, Germany
924
Application of the Eötvos and Guggenheim empirical rules for predicting the density and surface tension of ionic liquids analogues
925
Application of the equilibrium theory to ternary moving bed configurations (4+4, 5+4, 8 and 9 zones): II. Langmuir case
926
Application of the equivalency factor concept to the phototoxicity and –genotoxicity of furocoumarin mixtures
927
Application of the ERAS model to HE and VE of 1-alkanol + 1-alkene and 1-alkanol + 1-alkyne mixtures
928
Application of the ERAS-Model to binary mixtures of diethylamine and s-butylamine with acetonitrile in the temperature range (288.15–303.15) K
929
Application of the ERICA Integrated Approach to the Drigg coastal sand dunes
930
Application of the EROSION 3D model to the CATSOP watershed, The Netherlands
931
Application of the error propagation theory in estimates of static formation temperatures in geothermal and petroleum boreholes
932
Application of the essential work of fracture concept to nanostructured polymer materials
933
Application of the essential work of fracture method in ranking the performance in service of high-density polyethylene resins employed in pressure pipes
934
Application of the European flaw assessment procedure SINTAP to thin wall structures subjected to biaxial and mixed mode loadings
935
Application of the European flaw assessment procedure SINTAP to thin wall structures: Analytical assessment levels
936
Application of the European reference soil set (EUROSOILS) to a HPLC-screening method for the estimation of soil adsorption coefficients of organic compounds
937
Application of the european SINTAP procedure to the failure analysis of a broken forklift
938
Application of the evaporative light scattering detector to analytical problems in polymer science
939
Application of the exact muffin-tin orbitals theory: the spherical cell approximation
940
Application of the Exact Operational Matrices Based on the Bernstein Polynomials
941
Application of the exact operational matrices for solving the Emden-Fowler equations, arising in Astrophysics
942
Application of the exergetic cost theory to the LiBr/H2O vapour absorption system
943
Application of the exergy concept in the petroleum refining and petrochemical industry
944
Application of the exergy index as ecological indicator of organically enrichment areas in the Mar Menor lagoon (south-eastern Spain)
945
Application of the -expansion method for the complex KdV equation
946
Application of the experiment design method to the study of the performance of the electrochlorination cells Original Research Article
947
Application of the experimental design of experiments (DoE) for the determination of organotin compounds in water samples using HS-SPME and GC–MS/MS
948
Application of the Exp-function method for solving the combined KdV-mKdV and Gardner-KP equations
949
Application of the explosive method for creating nitrogen layers
950
Application of the extended Brenner potential to the Si(111)7×7:H system I: cluster calculations
951
Application of the extended Brenner potential to the Si(111)7×7:H system: II: periodic calculations
952
Application of the Extended Corresponding States Method to the Calculation of the Ammonia–Water Mixture Thermodynamic Surface
953
Application of the extended Kalman filter to a lysine hydrochlorination process
954
Application of the extended Kantorovich method to the bending of clamped cylindrical panels
955
Application of the Extended Langmuir model to surface tension data of binary liquid mixtures
956
Application of the extended P + Q Q force model to N ~ Z f p shell nuclei
957
Application of the extended P+QQ force model to N≈Z fp shell nuclei Original Research Article
958
Application of the extended pairing model to heavy isotopes
959
Application of the Extended Planned Behavior Theory to Predict COVID-19 Preventive Behaviors
960
Application of the extended RSA models in studies of particle deposition at partially covered surfaces
961
Application of the extended solvation theory to study the interaction of β-CD with interpolymer of PEO and PAA
962
Application of the extraction induced by emulsion breaking for the determination of chromium and manganese in edible oils by electrothermal atomic absorption spectrometry
963
Application of the extraction induced by emulsion breaking for the determination of Cu, Fe and Mn in used lubricating oils by flame atomic absorption spectrometry
964
Application of the extreme learning machine algorithm for the prediction of monthly Effective Drought Index in eastern Australia
965
Application of the Extreme Learning Machine for Modeling the Bead Geometry in Gas Metal Arc Welding Process
966
Application of the factor method to maintenance decision support for stone cladding
967
Application of the factor method to the estimation of the service life of natural stone cladding
968
Application of the factorial design of experiments to biodiesel production from lard
969
Application of the factorization method to the characterization of weak inclusions in electrical impedance tomography
970
Application of the Faddeev-Jackiw formalism to the gauged WZW model
971
Application of the Falcon Concentrator for fine coal cleaning
972
Application of the Fast Controlled Precipitation method to assess the scale-forming ability of raw river waters Original Research Article
973
Application of the fast fourier transform to interpret geoelectric anomalies: Preliminary results
974
Application of the Fast Gauss Transform to Option Pricing
975
Application of the fast multipole method for the evaluation of magnetostatic fields in micromagnetic computations
976
Application of the fast multipole method to hybrid finite element–boundary element models
977
Application of the fault tree analysis for assessment of power system reliability
978
Application of the fault tree analysis for assessment of power system reliability
979
Application of the FCM-based neuro-fuzzy inference system and genetic algorithm-polynomial neural network approaches to modelling the thermal conductivity of alumina–water nanofluids
980
Application of the feature selection method to discriminate digitized wheat varieties
981
Application of the feature-detection rule to the Negative Selection Algorithm
982
Application of the FEM for the prediction of the surface layer characteristics after shot peening
983
Application of the FEM with adaptivity for electromagnetic inverse medium scattering problems
984
Application of the Fenton process to the dissolution and mineralization of ion exchange resins
985
Application of the ferroelectric materials to ULSI memories
986
Application of the FETI method to ASCI problems - scalability results on 1000 processors and discussion of highly heterogeneous problems
987
Application of the Feynman–Kac path integral method in finding excited states of quantum systems Original Research Article
988
Application of the Feynman-Kac path integral method in finding the ground state of quantum systems Original Research Article
989
Application of the field emitter array to the vacuum measurements
990
Application of the field method to the non-linear theory of vibrations
991
Application of the field theoretic method of Bohm and Pines to the determination of the activity coefficients of strong 1:1 electrolytes
992
Application of the fields of objects formed on the basis of unit tensor objects to describe the tensile and compression failure stresses of pine wood in the principal orthotropy plane
993
Application of the final state Auger parameter imperfect screening model for the Si L VV spectrum of porous silicon
994
Application of the finite element method for localized failure analysis in dynamic loading
995
Application of the finite element method in self-consistent relativistic mean field calculations Original Research Article
996
Application of the finite element method in the tensileshear test of adhesive technology
997
Application of the finite element method in the tensile-shear test of adhesive technology
998
Application of the finite element method to gravity data case study: Western Turkey
999
Application of the Finite Element Method to mixed-mode cyclic crack propagation calculations in specimens
1000
Application of the finite element method to predict microstructure evolution in the hot forging of steel
