<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Surface modification of carbon nanotubes for enhancing BTEX adsorption from aqueous solutions
2
Surface Modification of Carbon Nanotubes Using Acid Treatment to Enhance Gas Separation Performance of Hybrid Nanocomposite Mixed Matrix Membrane
3
Surface modification of carbon nanotubes with ethylene glycol plasma Original Research Article
4
Surface modification of carbon/carbon composites to improve their wettability by copper Original Research Article
5
Surface modification of carbon/epoxy prepreg using oxygen plasma and its effect on the delamination resistance behavior of carbon/epoxy composites
6
Surface modification of carbonaceous materials and their use in polymer electrolyte fuel cells and hydrogen-air secondary batteries
7
Surface modification of carbons for enhanced electrochemical activity
8
Surface modification of carbons for enhanced electrochemical activity
9
Surface modification of cardiovascular materials and implants
10
Surface modification of cardo polyetherketone ultrafiltration membrane by photo-grafted copolymers to obtain nanofiltration membranes
11
Surface Modification of Cast Iron Containing 6 mass% Aluminum and Its Wear Property
12
Surface modification of cathodes with nanosized amorphous MnO2 coating for high-power application in lithium-ion batteries
13
Surface modification of Ca-α-SiAlON: Eu2+ phosphor particles by SiO2 coating and fabrication of its deposit by electrophoretic deposition (EPD) process
14
Surface modification of cell culture carriers: Routes to anhydride functionalization of polystyrene
15
Surface modification of cellulose by PCL grafts Original Research Article
16
Surface modification of cellulose membranes with zwitterionic polymers for resistance to protein adsorption and platelet adhesion
17
Surface modification of cellulose nanowhisker throughout graft polymerization of 2-ethyl-2-oxazoline
18
Surface modification of cellulose using silane coupling agent
19
Surface modification of cellulose via atmospheric pressure plasma processing in air and ammonia–nitrogen gas
20
Surface modification of cellulose with triazine derivative to improve printability with reactive dyes
21
Surface modification of cellulose with triazine derivative to improve printability with reactive dyes
22
Surface modification of cellulosic fibers using dielectric-barrier discharge
23
Surface modification of cellulosic fibres for multi-purpose TiO2 based nanocomposites
24
Surface modification of cemented carbide by EB polishing
25
Surface modification of cemented carbide using plasma nitriding and metal ion implantation
26
Surface Modification of Ceramic Materials Using Excimer Laser
27
Surface modification of ceramic matrix composites induced by laser treatment
28
Surface modification of ceramic powders by titanate coupling agent for injection molding using partially water soluble binder system
29
Surface modification of ceramics for improved tribological properties
30
Surface modification of ceria nanoparticles and their chemical mechanical polishing behavior on glass substrate
31
Surface modification of chalcogenide glasses by N2 plasma treatment
32
Surface modification of chitosan films.: Effects of hydrophobicity on protein adsorption Original Research Article
33
Surface modification of chitosan for selective surface–protein interaction
34
Surface modification of chromatography adsorbents by low temperature low pressure plasma
35
Surface modification of CIGS film by annealing and its effect on the band structure and photovoltaic properties of CIGS solar cells
36
Surface modification of Cl-adsorbed Si(1 1 1)-7 × 7 by the irradiation of infrared pulsed laser
37
Surface modification of clay minerals
38
Surface modification of clays and clay–rubber composite
39
Surface modification of CNTs and enhanced photocatalytic activity of TiO2 coated on hydrophilically modified CNTs
40
Surface modification of cobalt–chromium–tungsten–nickel alloy using octadecyltrichlorosilanes
41
Surface modification of coconut-based activated carbon by liquid-phase oxidation and its effects on lead ion adsorption Original Research Article
42
Surface modification of co-evaporated thin films upon oxygen and air exposure
43
Surface modification of coir fibre involving oxidation of lignins followed by reaction with furfuryl alcohol: Characterization and stability
44
Surface modification of commercial aromatic polyamide reverse osmosis membranes by graft polymerization of 3-allyl-5,5-dimethylhydantoin
45
Surface modification of commercial cellulose acetate membranes using surface-initiated polymerization of 2-hydroxyethyl methacrylate to improve membrane surface biofouling resistance
46
Surface modification of commercial polyamide desalination membranes using poly(ethylene glycol) diglycidyl ether to enhance membrane fouling resistance
47
Surface modification of conjugated polymers: an application of near-field optical microscopy in sub-micron photochemistry
48
Surface modification of constructional steels by irradiation with high intensity pulsed nitrogen plasma beams
49
Surface Modification of Copper Current Collector to Improve the Mechanical and Electrochemical Properties of Graphite Anode in Lithium-Ion Battery
50
Surface modification of copper using high intensity, 1015 W/cm2, femtosecond laser in vacuum
51
Surface modification of copper with 2-dodecylpropane-1,3-dithiol: The key effect of the solvent
52
Surface modification of core–shell nanowire with protein adsorption
53
Surface modification of Corynebacterium glutamicum for enhanced Reactive Red 4 biosorption
54
Surface modification of cotton fabric by grafting of polyurethane
55
Surface modification of cotton fabrics for antibacterial application by coating with AgNPs–alginate composite
56
Surface modification of cotton yarn with a DC glow discharge in ambient air
57
Surface modification of CP-Ti to improve the fretting-corrosion resistance: Thermal oxidation vs. anodizing
58
Surface Modification of CTA-FO Membrane by CO2 Plasma Treatment
59
Surface modification of Cu metal particles by the chemical reaction between the surface oxide layer and a halogen surfactant Original Research Article
60
Surface modification of cyclic olefin copolymer substrate by oxygen plasma treatment
61
Surface modification of DF-2 tool steel under the scan of a YAG laser in continuously moving mode
62
Surface modification of diamond-like carbon films to graphene under low energy ion beam irradiation
63
Surface modification of diamond-like carbon films with perfluorooctyl functionalities and their surface properties
64
Surface modification of diamond-like carbon films with protein via polydopamine inspired coatings
65
Surface modification of diatomite using polyaniline
66
Surface modification of doped ZnO thin films
67
Surface modification of Dy2O3–Nb2O5 dope mix for dielectric materials in aqueous dispersion
68
Surface modification of elastomerrcarbon composite by Ndq:YAG laser and KrF excimer laser ablation
69
Surface modification of electrical contacts by cold gas dynamic spraying process
70
Surface modification of electrospun cellulose acetate nanofibers via RAFT polymerization for DNA adsorption
71
Surface modification of electrospun PLLA nanofibers by plasma treatment and cationized gelatin immobilization for cartilage tissue engineering
72
Surface modification of electrospun polyacrylonitrile nanofiber towards developing an affinity membrane for bromelain adsorption Original Research Article
73
Surface modification of electrospun spherical activated carbon for a high-performance biosensor electrode
74
Surface modification of epoxy resin by polyether–polydimethylsiloxanes–polyether triblock copolymers
75
Surface modification of EVA copolymer by UV treatment
76
Surface modification of exchange-coupled Co/NiOx magnetic bilayer by bias sputtering
77
Surface modification of Fe3O4@SiO2 microsphere by silane coupling agent
78
Surface modification of ferromagnetics for polymer composites
79
Surface modification of fibrillar silicate and its reinforcing mechanism on FS/rubber composites
80
Surface modification of filter medium particles with silane coupling agent KH550
81
Surface modification of fluorinated aluminas: Application of solid state NMR spectroscopy to the study of acidity and surface structure
82
Surface modification of fluorosilicone acrylate RGP contact lens via low-temperature argon plasma
83
Surface modification of fly ash - characterisation and evaluation as reinforcing filler in polyisoprene
84
Surface modification of fly ash - characterisation and evaluation as reinforcing filler in polyisoprene
85
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
86
Surface modification of GaAs during argon ionic cleaning and nitridation: EELS, EPES and XPS studies
87
Surface modification of gas diffusion layers by inorganic nanomaterials for performance enhancement of proton exchange membrane fuel cells at low RH conditions
88
Surface Modification of Glassy Carbon Electrode by Ni-Cu Nanoparticles as a Competitive Electrode for Ethanol Electro-Oxidation
89
Surface modification of goethite by phosphate for enhancement of Cu and Cd adsorption
90
Surface modification of gold nanoparticles and their monolayer behavior at the air/water interface
91
Surface modification of gold nanoparticles with 6- mercapto-1-hexanol to facilitate dual conjugation of protoporphyrin IX and folic acid for improving the targeted photochemical internalization
92
Surface modification of gold nanorods using layer-by-layer technique for cellular uptake
93
Surface modification of gold nanotubules via microwave radiation, sonication and chemical etching
94
Surface modification of graphene and graphite by nitrogen plasma: Determination of chemical state alterations and assignments by quantitative X-ray photoelectron spectroscopy
95
Surface modification of graphite anodes by combination of high temperature gas treatment and silylation in nonaqueous solution
96
Surface modification of graphite by coke coating for reduction of initial irreversible capacity in lithium secondary batteries
97
Surface modification of graphitized carbonaceous materials by electropolymerization of thiophene and their effects on electrochemical properties Original Research Article
98
Surface modification of g-TiAl alloys by acetylene plasma deposition
99
Surface modification of hafnia with polyelectrolytes based on the spin-coating electrostatic self-assembly method
100
Surface modification of halogenated polymers. 4. Functionalisation of poly(tetrafluoroethylene) surfaces by diazonium salts
101
Surface modification of halogenated polymers. 6. Graft copolymerization of poly(tetrafluoroethylene) surfaces by polyacrylic acid
102
Surface modification of halogenated polymers. 9. Etching of polytetrafluoroethylene with the scanning electrochemical microscope
103
Surface modification of halogenated polymers: 5. Localized electroless deposition of metals on poly(tetrafluoroethylene) surfaces
104
Surface modification of hard alloy by Y ion implantation under different atmosphere
105
Surface modification of Hastelloy C-276 by SiC addition and electron beam melting
106
Surface modification of heterogeneous cation exchange membrane through simultaneous using polymerization of PAA and multi walled carbon nano tubes
107
Surface modification of high calcium fly ash for its application in oil spill clean up
108
Surface modification of high heat resistant UV cured polyurethane dispersions
109
Surface modification of high performance PBO fibers using radio frequency argon plasma
110
Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded joints
111
Surface modification of highly oriented pyrolytic graphite by reaction with atomic nitrogen at high temperatures
112
Surface modification of high-performance polymeric fibers by an oxygen plasma. A comparative study of poly(p-phenylene terephthalamide) and poly(p-phenylene benzobisoxazole)
113
Surface modification of high-speed steel by intense pulsed ion beam irradiation
114
Surface modification of HMS material with silica sol leading to a remarkable enhanced catalytic performance of Cu/SiO2
115
Surface modification of HSA containing magnetic PLGA nanoparticles by poloxamer to decrease plasma protein adsorption
116
Surface modification of hydroturbine steel using friction stir processing
117
Surface modification of hydroxyapatite nanoparticles by poly(l-phenylalanine) via ROP of l-phenylalanine N-carboxyanhydride (Pha-NCA)
118
Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP
119
Surface modification of hydroxyapatite. Part I. Dodecyl alcohol
120
Surface modification of hydroxyapatite. Part II. Silica
121
Surface modification of III–V semiconductors: chemical processes and electronic properties
122
Surface modification of imide containing polymers I: Catalytic groups
123
Surface modification of imide containing polymers II: Co-reactive groups
124
Surface modification of indium tin oxide anode with self-assembled monolayer modified Ag film for improved OLED device characteristics
125
Surface modification of indium tin oxide films by amino ion implantation for the attachment of multi-wall carbon nanotubes
126
Surface modification of indium tin oxide films with Au ions implantation: Characterization and application in bioelectrochemistry
127
Surface modification of indium tin oxide films with NH2+ ion implantation: Surface properties and gold nanoparticles attachment
128
Surface modification of inorganic layer compound with organic compound and preparation of thin films
129
Surface modification of investment cast-316L implants: Microstructure effects
130
Surface modification of ion exchange membrane using amines
131
Surface modification of iron containing aluminum alloys by treatment with copper plasma produced with cathodic arc
132
Surface modification of iron particles with polystyrene and surfactants under high-energy ball milling
133
Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites
134
Surface modification of La0.3Sr0.7CoO3−δ ceramic membranes
135
Surface modification of laser ablated YBCO target
136
Surface modification of layered double hydroxides and incorporation of hydrophobic organic compounds
137
Surface modification of LDPE by a DC corona discharge generated in a point-to-grid system: the influence of geometric parameters of the system on modification power
138
Surface modification of LDPE film by CO2 pulsed laser irradiation
139
Surface modification of lead silicate glass under X-ray irradiation
140
Surface modification of Lexan treated by RF plasma
141
Surface modification of Li[Li0.2Ni0.2Mn0.6]O2 nanoparticles with polydopamine-assisted MgF2 coating
142
Surface modification of Li1.03Mn1.97O4 spinels for improved capacity retention
143
Surface modification of LiCoO2 with Li3xLa2/3−xTiO3 for all-solid-state lithium ion batteries using Li2S–P2S5 glass–ceramic
144
Surface modification of LiMn2O4 thin films at elevated temperature
145
Surface modification of LiNi0.8Co0.2O2 with La2O3 for lithium-ion batteries
146
Surface modification of LiNi1/2Mn3/2O4 thin-films by zirconium alkoxide/PMMA composites and their effects on electrochemical properties
147
Surface modification of lipid nanocapsules with polysaccharides: From physicochemical characteristics to in vivo aspects
148
Surface modification of low and high temperature co-fired ceramics for enzymatic microreactor fabrication
149
Surface modification of low carbon steel substrate by Al-rich clad layer applied by GTAW
150
Surface modification of low cost carbons for their application in the environmental protection
151
Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment
152
Surface modification of lyocell fibres by graft copolymerization of thermo-sensitive poly-N-isopropylacrylamide
153
Surface modification of macroporous glycidyl methacrylate based copolymers for selective sorption of heavy metals
154
Surface modification of magnesium alloys using triazine dithiols
155
Surface modification of magnesium aluminum hydroxide nanoparticles with poly(methyl methacrylate) via one-pot in situ polymerization
156
Surface modification of magnetic metal nanoparticles through irradiation graft polymerization
157
Surface Modification of Magnetic MnFe2O4@SiO2 Core-shell Nanoparticles with deposited Layer of 3-Aminopropyl Triethoxysilane
158
Surface Modification of Magnetic Nanoparticles Using Gum Arabic
159
Surface modification of magnetic nanoparticles with oleylamine and gum Arabic
160
Surface modification of magnetite nanoparticles using gluconic acid and their application in immobilized lipase
161
Surface modification of magnetite nanoparticles using lactobionic acid and their interaction with hepatocytes
162
Surface modification of magnetron-sputtered hydroxyapatite thin films via silicon substitution for orthopaedic and dental applications
163
Surface modification of maize starch films by low-pressure glow 1-butene plasma
164
Surface modification of MAl2O4:Eu2+,Dy3+ (M = Sr, Ca, Ba) phosphors to enhance water resistance by combustion method
165
Surface modification of M-Ba-ferrite powders by polyaniline: Towards improving microwave electromagnetic response
166
Surface modification of m-BiVO4 with wide band-gap semiconductor BiOCl to largely improve the visible light induced photocatalytic activity
167
Surface modification of membranes for the separation of volatile organic compounds from water by pervaporation Original Research Article
168
Surface modification of mesoporous membranes by fluoro-silane coupling reagent for CO2 separation
169
Surface Modification of Mesoporous Nanosilica with [3-(2-Aminoethylamino) propyl] trimethoxysilaneand Its Application in Drug Delivery
170
Surface modification of metal alloys by plasma immersion ion implantation and subsequent plasma nitriding
171
Surface modification of Mg67–Zn30–Y3 quasicrystal alloy by high current pulsed electron beam
172
Surface modification of mica due to titanium sputtering as studied by positron annihilation
173
Surface modification of micro- and nanocarriers for anticancer, anti-diabetic, antimicrobial, and anti-neurodegenerative applications: PEGylation strategy
174
Surface modification of microfibrillated cellulose for epoxy composite applications
175
Surface modification of microporous polypropylene membranes by the grafting of poly(γ-stearyl-l-glutamate)
176
Surface modification of microporous polyurethane membrane with poly(ethylene glycol) to develop a novel membrane
177
Surface modification of microporous PVDF membranes by ATRP
178
Surface modification of microporous PVDF membranes for neuron culture
179
Surface Modification of Mild Steel Using Tungsten Inert Gas Torch Surface Cladding
180
Surface modification of Mitoxantrone-loaded PLGA nanospheres with chitosan
181
Surface modification of monodisperse hydroxyl functionalized polymeric microspheres using ceric ammonium nitrate
182
Surface Modification of Multilayer Coatings Ti-Al-Cr and Hydroxyapatite on Calcium Phosphate Cement with Sol-Gel Method
183
Surface modification of multi-walled carbon nanotubes by a sol–gel reaction to increase their compatibility with PMMA resin
184
Surface modification of multi-walled carbon nanotubes by O2 plasma
185
Surface modification of multi-walled carbon nanotubes using 3-aminopropyltriethoxysilane
186
Surface modification of nano-apatite by grafting organic polymer
187
Surface modification of nanocast ordered mesoporous carbons through a wet oxidation method Original Research Article
188
Surface modification of nanocolloidal silica for use as polishing abrasive particles
189
Surface modification of nanocomposite ceramic membranes by PDMS for condensable hydrocarbons separation Original Research Article
190
Surface modification of nanocrystalline anatase with CTAB in the acidic condition and its effects on photocatalytic activity and preferential growth of TiO2
191
Surface modification of nanocrystalline calcium phosphate bioceramic by low energy nitrogen ion implantation
192
Surface modification of nanofibrous poly(acrylonitrile-co-acrylic acid) membrane with biomacromolecules for lipase immobilization
193
Surface modification of nanofibrous polycaprolactone/gelatin composite scaffold by collagen type I grafting for skin tissue engineering
194
Surface modification of nanofiltration membranes by ion implantation
195
Surface modification of nanofiltration membranes to improve the removal of organic micro-pollutants (EDCs and PhACs) in drinking water treatment: Graft polymerization and cross-linking followed by functional group substitution
196
Surface modification of nanophase hydroxyapatite with chitosan
197
Surface modification of nano-porous anodic alumina membranes and its use in electroosmotic flow
198
Surface modification of nanoporous materials for electric double layer capacitors application
199
Surface modification of nanosheet oxide photocatalysts
200
Surface modification of nanosilica with 3-mercaptopropyl trimethoxysilane: Experimental and theoretical study on the surface interaction
201
Surface modification of nano-SiO2 particles using polyaniline
202
Surface modification of nano-sized HZSM-5 and HFER by pre-coking and silanization
203
Surface modification of nanostructured ceramic membranes for direct contact membrane distillation
204
Surface modification of nano-TiO2 with trimellitylimido-amino acid-based diacids for preventing aggregation of nanoparticles
205
Surface modification of natural graphite particles for lithium ion batteries
206
Surface modification of natural halloysite clay nanotubes with aminosilanes. Application as catalyst supports in the atom transfer radical polymerization of methyl methacrylate Original Research Article
207
Surface modification of natural leather using low-pressure parallel plate plasma
208
Surface modification of natural Na-montmorillonite in alkane solvents using a quaternary ammonium surfactant
209
Surface modification of natural rubber by TiO2 film
210
Surface modification of natural rubber film by polymerisation of methyl methacrylate in water-based system
211
Surface modification of natural rubber latex films by graft copolymerization
212
Surface modification of natural zeolite by chitosan and its use for nitrate removal in cold regions
213
Surface modification of Ni catalysts with trace Pd and Rh for oxidative steam reforming of methane Original Research Article
214
Surface modification of Ni catalysts with trace Pt for oxidative steam reforming of methane
215
Surface modification of Ni/Al2O3 with Pt: Highly efficient catalysts for H2 generation via selective decomposition of hydrous hydrazine
216
Surface modification of nickel hydroxide particles by micro-sized cobalt oxide hydroxide and properties as electrode materials
217
Surface modification of NiTi alloy with tantalum to improve its biocompatibility and radiopacity
218
Surface modification of NiTi by plasma based ion implantation for application in harsh environments
219
Surface modification of NiTi for orthopaedic braces by plasma immersion ion implantation
220
Surface modification of NiTi/PZT heterostructure thin films using various protective layers for potential MEMS applications
221
Surface modification of nodular cast iron: A comparative study on graphite elimination
222
Surface modification of nonporous glass beads with chitosan and their adsorption property for transition metal ions
223
Surface modification of non-woven fabric by DC pulsed plasma treatment and graft polymerization with acrylic acid
224
Surface modification of oil fly ash and its application in selective capturing of carbon dioxide
225
Surface modification of OPC-based cement using a frequency doubled Nd:YAG laser system
226
Surface modification of P(EMA-co-HEA)/SiO2 nanohybrids for faster hydroxyapatite deposition in simulated body fluid?
227
Surface modification of paclitaxel-loaded polymeric nanoparticles: Evaluation of in vitro cellular behavior and in vivo pharmacokinetic
228
Surface modification of paper and cellulose by plasma-assisted deposition of fluorocarbon films
229
Surface modification of PDMS by atmospheric-pressure plasma-enhanced chemical vapor deposition and analysis of long-lasting surface hydrophilicity
230
Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate
231
Surface modification of PDMS using atmospheric glow discharge polymerization of tetrafluoroethane for immobilization of biomolecules
232
Surface modification of PE film by DBD plasma in air
233
Surface modification of PE porous membranes based on the strong adhesion of polydopamine and covalent immobilization of heparin
234
Surface modification of Penicillium chrysogenum mycelium for enhanced anionic dye removal
235
Surface modification of perfluorosulfonic acid membranes with perfluoroheptane (C7F16)/argon plasma
236
Surface modification of PET film by a DBD device at atmospheric pressure
237
Surface modification of PET films by atmospheric pressure plasma-induced acrylic acid inverse emulsion graft polymerization
238
Surface modification of piezoelectric aluminum nitride with functionalizable organosilane adlayers
239
Surface modification of pitch-based spherical activated carbon by CVD of NH3 to improve its adsorption to uric acid
240
Surface modification of plastic, glass and titanium by photoimmobilization of polyethylene glycol for antibiofouling
241
Surface modification of plasticized PVC by dry cleaning methods: Consequences for artworks
242
Surface modification of platinum quartz crystal microbalance by controlled electroless deposition of gold nanoparticles and its enhancing effect on the HS-DNA immobilization
243
Surface modification of PLGA nanoparticles via human serum albumin conjugation for controlled delivery of docetaxel
244
Surface modification of PLGA/β-TCP scaffold for bone tissue engineering: Hybridization with collagen and apatite
245
Surface modification of PMMA by DC glow discharge and microwave plasma treatment for the improvement of coating adhesion
246
Surface modification of PMMA polymer in the interaction with oxygen-argon RF plasma
247
Surface modification of PMMA/O-MMT composite microfibers by TiO2 coating
248
Surface modification of poly(acrylonitrile-co-maleic acid) membranes by the immobilization of poly(ethylene glycol)
249
Surface modification of poly(amidoamine) (PAMAM) dendrimer as antimicrobial agents
250
Surface modification of poly(dimethylsiloxane) by atmospheric pressure high temperature plasma torch to prepare high-performance gas separation membranes
251
Surface modification of poly(dimethylsiloxane) by two-step plasma treatment for further grafting with chitosan–Rose Bengal photosensitizer
252
Surface modification of poly(dimethylsiloxane) for microfluidic assay applications
253
Surface modification of poly(dimethylsiloxane) microchips using a double-chained cationic surfactant for efficiently resolving fluorescent dye adsorption
254
Surface modification of poly(ethylene terephthalate) (PET) by magnet enhanced dielectric barrier discharge air plasma
255
Surface modification of poly(ethylene terephthalate) fabric via photo-chemical reaction of dimethylaminopropyl methacrylamide
256
Surface modification of poly(ethylene terephthalate) fibers induced by radio frequency air plasma treatment
257
Surface modification of poly(ethylene-co-vinyl alcohol): hydroxyapatite immobilization and control of periodontal ligament cells differentiation
258
Surface modification of poly(hydroxybutyrate) films to control cell–matrix adhesion
259
Surface modification of poly(lactide-co-glycolide) nanoparticles by d-α-tocopheryl polyethylene glycol 1000 succinate as potential carrier for the delivery of drugs to the brain
260
Surface modification of poly(l-lactic acid) to improve its cytocompatibility via assembly of polyelectrolytes and gelatin
261
Surface modification of poly(l-lactide) electrospun fibers with nanocrystal hydroxyapatite for engineered scaffold applications
262
Surface modification of poly(oligoethylene oxide methacrylate) for resisting protein adsorption
263
Surface modification of poly(propylene carbonate) by aminolysis and layer-by-layer assembly for enhanced cytocompatibility
264
Surface modification of poly(propylene carbonate) by oxygen ion implantation
265
Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)
266
Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via UV-induced graft polymerization of N-vinyl pyrrolidone
267
Surface modification of poly(tetrafluoroethylene) by excimer laser processing: enhancement of adhesion
268
Surface modification of poly(tetrafluoroethylene) by saddle field fast atom beam source
269
Surface modification of poly(tetrafluoroethylene) films by plasma polymerization of glycidyl methacrylate for adhesion enhancement with evaporated copper
270
Surface modification of poly(tetrafluoroethylene) films via plasma treatment and graft copolymerization of acrylic acid Original Research Article
271
Surface modification of poly(tetramethylene adipate-co-terephthalate) membrane via layer-by-layer assembly of chitosan and dextran sulfate polyelectrolyte multiplayer
272
Surface modification of poly(vinylidene fluoride) by alkaline treatment Part 2. Process modification by the use of phase transfer catalysts
273
Surface modification of poly(vinylidene fluoride) film by remote Ar, H2, and O2 plasmas
274
Surface modification of poly(vinylidenefluoride) to improve the osteoblast adhesion
275
Surface modification of poly(ε-caprolactone) using a dielectric barrier discharge in atmospheric pressure glow discharge mode
276
Surface modification of poly[2-methoxy,5-(2-ethyl-hexyloxy)-1,4-phenylenevinylene] in the optical near field
277
Surface modification of polyacrylonitrile fiber for immobilization of antibodies and detection of analyte Original Research Article
278
Surface modification of polyacrylonitrile film by anchoring conductive polyaniline and determination of uricase adsorption capacity and activity
279
Surface modification of polyacrylonitrile nanofibrous membranes with superior antibacterial and easy-cleaning properties through hydrophilic flexible spacers
280
Surface modification of polyacrylonitrile-based carbon fiber and its interaction with imide
281
Surface modification of polyamide 66 fabric by microwave induced grafting with 2-hydroxyethyl methacrylate
282
Surface modification of polyamide fibers and films using atmospheric plasmas
283
Surface modification of polyaniline film by grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion
284
Surface modification of polycaprolactone scaffolds fabricated via selective laser sintering for cartilage tissue engineering
285
Surface modification of polycaprolactone with poly(methacrylic acid) and gelatin covalent immobilization for promoting its cytocompatibility
286
Surface modification of polycrystalline iron surfaces by n-dodecanethiol: an XPS investigation
287
Surface modification of polydimethylsiloxane with photo-grafted poly(ethylene glycol) for micropatterned protein adsorption and cell adhesion
288
Surface modification of polyester fabric by corona discharge irradiation
289
Surface modification of polyester fabrics for inkjet printing with atmospheric-pressure air/Ar plasma
290
Surface modification of polyester to produce a bacterial cellulose-based vascular prosthetic device
291
Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)–polyurethane–methoxyl poly(ethylene glycol)
292
Surface modification of polyethersulfone ultrafiltration membranes by corona air plasma for separation of oil/water emulsions
293
Surface modification of polyethersulfone ultrafiltration membranes by corona plasma-assisted coating TiO2 nanoparticles
294
Surface modification of polyethylene balloon catheters for local drug delivery
295
Surface modification of polyethylene by Ag+ and Au+ ion implantation observed by phase imaging atomic force microscopy
296
Surface modification of polyethylene film by acrylamide graft and alcoholysis for improvement of antithrombogenicity
297
Surface modification of polyethylene for improving the adhesion of a highly fluorinated UV-cured coating
298
Surface modification of polyethylene terephthalate by plasma immersion ion implantation
299
Surface modification of polyethylene terephthalate with albumin and gelatin for improvement of anticoagulation and endothelialization
300
Surface modification of polyethyleneterephthalate by an atmospheric-pressure plasma source
301
Surface modification of polyimide (PI) film using water cathode atmospheric pressure glow discharge plasma
302
Surface modification of polyimide alignment films by ion beams for liquid crystal displays
303
Surface modification of polyimide film by coupling reaction for copper metallization
304
Surface modification of polyimide films using unipolar nanosecond-pulse DBD in atmospheric air
305
Surface modification of polyimide films via plasma polymerization and deposition of allylpentafluorobenzene
306
Surface modification of polyimide membranes by diethylenetriamine (DETA) vapor for H2 purification and moisture effect on gas permeation
307
Surface modification of polyimide using dielectric barrier discharge treatment
308
Surface modification of poly-l-lactic acid fibrous scaffolds by a molecular-designed multi-walled carbon nanotube multilayer for enhancing cell interactions Original Research Article
309
Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet
310
Surface modification of polymer latex particles by AGET ATRP of a styrene derivative bearing a lactose residue
311
Surface modification of polymer nanofibres by plasma treatment
312
Surface modification of polymer using AC-pulsed plasma: Optimization of the electrical parameters and characterization by contact angle and probe-tack tests
313
Surface modification of polymer-based microfluidic devices Original Research Article
314
Surface modification of polymeric blends by nitrogen plasma implantation
315
Surface modification of polymeric microspheres using glycopolymers for biorecognition
316
Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release
317
Surface modification of polymers VII.: Photochemical grafting of acrylamide and N-isopropylacrylamide onto polyethylene initiated by anthraquinone-2-sulfonate adsorbed at the surface of the polymer
318
Surface modification of polymethyl methacrylate intraocular lenses by plasma for improvement of antithrombogenicity and transmittance
319
Surface modification of polypropylene and compatibilization of interfaces in incompatible blends of polypropylene with polystyrene by plasma of CO2
320
Surface modification of polypropylene films by chitosan and chitosan/pectin multilayer
321
Surface modification of polypropylene macroporous membrane by marrying RAFT polymerization with click chemistry
322
Surface modification of polypropylene macroporous membrane to improve its antifouling characteristics in a submerged membrane-bioreactor: H2O plasma treatment
323
Surface modification of polypropylene membrane by polyethylene glycol graft polymerization
324
Surface modification of polypropylene membranes by γ-ray induced graft copolymerization and their solute permeation characteristics
325
Surface modification of polypropylene microfiltration membrane via entrapment of an amphiphilic alkyl oligoethyleneglycolether
326
Surface modification of polypropylene microfiltration membranes by graft polymerization of N-vinyl-2-pyrrolidone
327
Surface modification of polypropylene microfiltration membranes by the immobilization of poly(N-vinyl-2-pyrrolidone): a facile plasma approach
328
Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: Air plasma treatment
329
Surface modification of polypropylene microporous membrane to improve its antifouling characteristics in an SMBR: N2 plasma treatment
330
Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment
331
Surface modification of polypropylene non-woven fabric using atmospheric nitrogen dielectric barrier discharge plasma
332
Surface modification of polypropylene using argon plasma: Statistical optimization of the process variables
333
Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture
334
Surface Modification of Polypropylene Yarns with SiO2 Sol-Gel: A Novel Approach to Enhance Thermal and Hydrophilic Properties for Depth Filter Applications
335
Surface modification of polypyrrole films via grafting of poly(ethylene glycol) for improved biocompatibility
336
Surface Modification of Polystyrene Beads by Ultraviolet/Ozone Treatment and its Effect on Gelatin Coating
337
Surface modification of polystyrene particles for specific antibody adsorption
338
Surface modification of polystyrene with atomic oxygen radical anions-dissolved solution
339
Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment
340
Surface modification of polytetrafluoroethylene by microwave plasma treatment of H2O/Ar mixture at low pressure
341
Surface modification of polytetrafluoroethylene by nitrogen ion implantation
342
Surface modification of polytetrafluoroethylene for adhesive bonding
343
Surface modification of polytetrafluoroethylene membranes by radio frequency methane/nitrogen mixture plasma polymerization
344
Surface modification of polytetrafluoroethylene using atmospheric pressure plasma jet for medical application
345
Surface modification of polyurethane and silicone for therapeutic medical technics by means of electron beam
346
Surface modification of polyurethane films by plasma and ultraviolet light to improve haemocompatibility for artificial heart valves
347
Surface modification of polyurethane membranes using acrylic acid vapour plasma and its effects on the pervaporation processes
348
Surface modification of polyurethane membranes using RF-plasma treatment with polymerizable and non-polymerizable gases
349
Surface modification of polyvalent element-containing glasses
350
Surface modification of polyvinylidene fluoride-co-hexafluoropropylene (PVDF–HFP) hollow fiber membrane for membrane gas absorption
351
Surface modification of porous antireflective coatings for solar glass covers
352
Surface modification of porous poly(tetrafluoraethylene) film by a simple chemical oxidation treatment
353
Surface modification of porous poly(tetrafluoroethylene) film via cold plasma treatment
354
Surface modification of PP under different electrodes of DC glow discharge and its physicochemical characteristics
355
Surface modification of precipitated calcium carbonate using aqueous fluosilicic acid
356
Surface modification of pre-sintered BaTiO3 particles
357
Surface modification of protein nanocontainers and their self-directing character in polymer blends
358
Surface modification of PTFE by synchrotron radiation under the O2 gas atmosphere
359
Surface modification of PTFE using an atmospheric pressure plasma jet in argon and argon + CO2
360
Surface modification of pure niobium by plasma nitriding
361
Surface modification of pure titanium by pulsed electron beam
362
Surface modification of pure titanium treated with B4C at high temperature
363
Surface modification of PVDF hollow fiber membrane and its application in membrane aerated biofilm reactor (MABR)
364
Surface modification of PVDF membrane via AGET ATRP directly from the membrane surface
365
Surface modification of PVDF porous membranes via poly(DOPA) coating and heparin immobilization
366
Surface modification of Raw and Frit glazes by non-thermal helium plasma jet
367
Surface modification of recycled carbon fiber and its reinforcement effect on nylon 6 composites: Mechanical properties, morphology and crystallization behaviors
368
Surface modification of resistance welding electrode by electro-spark deposited composite coatings: Part I. Coating characterization
369
Surface modification of resistance welding electrodes by electro-spark deposited composite coatings: Part II. Metallurgical behavior during welding
370
Surface modification of SAE 1070 by chromium using plasma immersion ion implantation and deposition
371
Surface modification of SCM420 steel by plasma electrolytic treatment
372
Surface modification of seawater reverse osmosis (SWRO) membrane using methyl methacrylate-hydroxy poly(oxyethylene) methacrylate (MMA-HPOEM) comb-polymer and its performance Original Research Article
373
Surface modification of self-healing poly(urea-formaldehyde) microcapsules using silane-coupling agent
374
Surface modification of semiconductor photoelectrode for improved solar cell performance
375
Surface modification of sepiolite nanofibers with PEG based compounds to prepare polymer electrolytes
376
Surface modification of several carbon-based materials: comparison between CF4 rf plasma and direct F2-gas fluorination routes
377
Surface modification of several dental substrates by non-thermal, atmospheric plasma brush
378
Surface modification of Si/Ge multi-layers by MeV Si ion bombardment
379
Surface modification of Si/SiO2 by polymeric anion-exchanging membrane: Effect on interfacial morphology and electrochemical properties
380
Surface modification of SiC powders by hydrolysed aluminium coating
381
Surface modification of silica aerogels by hexamethyldisilazane–carbon dioxide mixtures and their phase behavior
382
Surface modification of silica by two-step method and properties of solution styrene butadiene rubber (SSBR) nanocomposites filled with modified silica
383
Surface modification of silica glass by CHF3 plasma treatment and carbon negative-ion implantation for cell pattern adhesion
384
Surface modification of silica membranes in a tubular-type module
385
Surface modification of silica nanoparticles with hydrophilic polymers
386
Surface modification of silica particles assisted by CO2
387
Surface modification of silica particles by dry coating: Characterization and powder ageing
388
Surface modification of silica particles using polyimide
389
Surface modification of silica particles with polyimide by ultrasonic wave irradiation
390
Surface modification of silica: 1. Thermodynamic aspects and effect on elastomer reinforcement
391
Surface modification of silica-coated zirconia by chemical treatments
392
Surface modification of silicate glasses by nanoimprint using nanostriped NiO thin film molds
393
Surface modification of silicon with single ion irradiation
394
Surface Modification of Silicone Rubber Membrane by Microwave Discharge to Improve Biocompatibility
395
Surface modification of silicone sheets and tubes using plasma-based ion implantation
396
Surface modification of SiLK1 by graft copolymerization with 4-vinylpyridine for reduction in copper diffusion
397
Surface modification of single crystal silicon by Ar+ ion implantation and vacuum deposition of amorphous carbon coating
398
Surface modification of SiO2 beads with multiple hydrophobic quantum dots for bioapplications
399
Surface modification of SiO2 nanoparticles for bacterial decontaminations of blood products
400
Surface modification of SnO2 nanoparticles containing Mg or Fe: Effects on sintering
401
Surface modification of sodium caseinate films by zein coatings
402
Surface modification of sol gel TiO2 surface with sputtered metallic silver for Sun light photocatalytic activity: Initial studies
403
Surface modification of sol–gel derived nano zinc oxide (ZnO) and the study of its effect on the properties of styrene–butadiene rubber (SBR) nanocomposites
404
Surface modification of sol–gel synthesized TiO2 nanoparticles induced by La-doping
405
Surface modification of solution combustion synthesized Ni/Al2O3 catalyst for aqueous-phase reforming of ethanol
406
Surface modification of sphalerite with sodium alginate
407
Surface modification of spin-coated high-density polyethylene films by argon and oxygen glow discharge plasma treatments
408
Surface Modification of SPK NL Steel: Relevance to Tribological and Electrochemical Potency
409
Surface modification of spray dried food and emulsion powders with surface-active proteins: A review Review Article
410
Surface Modification of Sputtered Ga.5In.5Sb Thin Films
411
Surface modification of stainless steel by grafting of poly(ethylene glycol) for reduction in protein adsorption
412
Surface modification of stainless steel in plasma environments
413
Surface modification of stainless steel in plasma environments
414
Surface modification of stainless steel powders for microfabrication
415
Surface modification of stainless steels by TEA CO2 laser
416
Surface Modification of Stainless-Steel Membrane using a Closed-Batch iCVD Reactor for Oil/Water Separation
417
Surface modification of steel and cast iron to improve corrosion resistance in molten aluminium
418
Surface modification of steels by complex diffusion saturation in low pressure arc discharge
419
Surface modification of sulfonated poly(ether ether ketone) membranes using Nafion solution for direct methanol fuel cells
420
Surface modification of sulphur prevulcanized natural rubber latex sheet via layer-by-layer assembled PMMA particles
421
Surface modification of superparamagnetic iron nanoparticles with calcium salt of poly(γ-glutamic acid) as coating material
422
Surface modification of superparamagnetic magnetite nanoparticles and their intracellular uptake
423
Surface modification of Sylgard 184 polydimethylsiloxane by 254 nm excimer radiation and characterization by contact angle goniometry, infrared spectroscopy, atomic force and scanning electron microscopy
424
Surface modification of TA2 pure titanium by low energy high current pulsed electron beam treatments
425
Surface modification of the MoSiON phase shift mask to reduce critical dimension variation
426
Surface modification of the nanoparticles by an atmospheric room-temperature plasma fluidized bed
427
Surface modification of the patterned Al6061/SUS304 metal plates using the large electron beam
428
Surface modification of the polyethyleneimine layer on silicone oxide film via UV radiation
429
Surface modification of the pure iron by the pulse plasma nitriding: Application of a kinetic model
430
Surface Modification of the SnO2 Layer Using UV-Ozone in a Perovskite Solar Cell with a Planar Structure
431
Surface modification of the titanium implant using TEA CO2 laser pulses in controllable gas atmospheres – Comparative study
432
Surface modification of the γ-TiAl alloys by the nitridation
433
Surface modification of thermally expandable microspheres by grafting poly(glycidyl methacrylate) using ARGET ATRP
434
Surface modification of thermoplastic poly(vinyl alcohol)/saponite nanocomposites via surface-initiated atom transfer radical polymerization enhanced by air dielectric discharges barrier plasma treatment
435
Surface modification of thermoplastics by atomic layer deposition of Al2O3 and TiO2 thin films
436
Surface modification of thick SiC gradient coatings on doped graphite under long pulse plasma irradiation
437
Surface modification of thin film composite membrane support layers with polydopamine: Enabling use of reverse osmosis membranes in pressure retarded osmosis
438
Surface modification of thin film composite polyamide membrane using atomic layer deposition method
439
Surface modification of thin film composite RO membrane for enhanced anti-biofouling performance
440
Surface modification of thin polyion complex film for surface plasmon resonance immunosensor
441
Surface modification of thin polymeric films by air-plasma or UV-irradiation
442
Surface modification of thin-film composite polyamide reverse osmosis membranes by coating N-isopropylacrylamide-co-acrylic acid copolymers for improved membrane properties
443
Surface modification of thin-film-composite polyamide membranes for improved reverse osmosis performance
444
Surface modification of three-dimensional poly(d,l-lactic acid) scaffolds with baicalin: A histological study
445
Surface modification of Ti dental implants by Nd:YVO4 laser irradiation
446
Surface modification of Ti implants by plasma oxidation in hollow cathode discharge
447
Surface modification of Ti-4Al-2V alloy by nitrogen implantation
448
Surface modification of Ti–6Al–4V alloy using an oxygen glow-discharge plasma to suppress the elution of toxic elements into physiological environment
449
Surface modification of Ti–6Al–4V alloy using laser-assisted deposition of a Ti–Si compound
450
Surface modification of Ti–6Al–4V alloy via friction-stir processing: Microstructure evolution and dry sliding wear performance
451
Surface modification of Ti–6Al–4V alloys using triode plasma oxidation treatments
452
Surface modification of TiAl alloy via current heating technique
453
Surface modification of Ti–Al targets during cathodic arc evaporation
454
Surface modification of TiFe hydrogen storage alloy by metal-organic chemical vapour deposition of palladium
455
Surface modification of tin oxide ultrafine particle thin films
456
Surface modification of Ti–Nb–Zr–Sn alloy by thermal and hydrothermal treatments
457
Surface modification of TiNi alloy through tantalum immersion ion implantation
458
Surface modification of TiO2 (rutile) by metal negative ion implantation for improving catalytic properties
459
Surface modification of TiO2 by a ruthenium(II) polypyridyl complex via silyl-linkage for the sensitized photocatalytic degradation of carbon tetrachloride by visible irradiation
460
Surface modification of TiO2 electrode by various over-layer coatings and O2 plasma treatment for dye sensitized solar cells
461
Surface modification of TiO2 film by iron doping using reactive magnetron sputtering
462
Surface modification of TiO2 nanoparticles and its effect on the properties of fluoropolymer/TiO2 nanocomposite coatings
463
Surface modification of TiO2 nanoparticles by polyaniline
464
Surface modification of TiO2 nanoparticles through plasma polymerization of acrylic acid
465
Surface modification of TiO2 nanoparticles via photocataliticaly induced reaction: Influence of functionality of silane coupling agent
466
Surface modification of TiO2 nanoparticles with silane coupling agents
467
Surface modification of TiO2 nanotubes by low temperature thermal treatment in C2H2 atmosphere
468
Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method
469
Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method
470
SURFACE MODIFICATION OF TITANIUM ALLOY THROUGH ELECTRICAL DISCHARGE MACHINING (EDM)
471
Surface modification of titanium alloy Ti6Al4V by plasma niobium alloying process
472
Surface modification of titanium by a diffusional carbo-nitriding method Original Research Article
473
Surface modification of titanium by etching in concentrated sulfuric acid
474
Surface modification of titanium by nano-TiO2/HA bioceramic coating
475
Surface modification of titanium by nitrogen ion implantation
476
Surface modification of titanium by nitrogen ion implantation
477
Surface modification of titanium membrane by chemical vapor deposition and its electrochemical self-cleaning
478
Surface modification of titanium oxide nanocrystals with PEG
479
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
480
Surface modification of tool steel by MOS2 powder shooting
481
Surface modification of tricalcium phosphate for improvement of the interfacial compatibility with biodegradable polymers
482
Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension
483
Surface modification of UHMWPE with infrared femtosecond laser
484
Surface modification of UHMWPE with γ-ray radiation for improving interfacial bonding strength with bone cement (II)
485
Surface modification of ultra high molecular weight polyethylene fibers via the sequential photoinduced graft polymerization
486
Surface modification of ultra thin poly ( -caprolactone) films using acrylic acid and collagen
487
Surface modification of ultrafiltration membranes by preadsorption of a negatively charged polymer: I. Permeation of water soluble polymers and inorganic salt solutions and fouling resistance properties
488
Surface modification of ultrafine precipitated silica with 3-methacryloxypropyltrimethoxysilane in carbonization process
489
Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma
490
Surface modification of vulcanized EPDM rubber by Ag(II): Kinetic study of Ag(II) generation and surface characterization
491
Surface modification of vulcanized styrene–butadiene rubber with trichloroisocyanuric acid solutions of different active chlorine contents
492
Surface modification of W9Cr4V2Mo high-temperature bearing steel by rare earth ion implantation
493
Surface modification of water treatment equipment for reducing CaSO4 scale formation Original Research Article
494
Surface modification of waterborne polyurethane
495
Surface Modification of Wood Fibers Using the Polyelectrolyte Multilayer Technique: Effects on Fiber Joint and Paper Strength Properties
496
Surface modification of Y3Al5O12:Ce3+ phosphor by hydrofluoric acid wet etching
497
Surface modification of zeolite Y and mechanism for reducing naphtha olefin formation in catalytic cracking reaction Original Research Article
498
Surface modification of zinc oxide nanoparticle by PMAA and its dispersion in aqueous system
499
Surface modification of zinc oxide nanorods for potential applications in organic materials
500
Surface modification of zinc-containing hydroxyapatite by tartaric acid
501
Surface modification of Zircaloy-4 substrates with nickel zirconium intermetallics
502
Surface modification of ZnO nanocrystals
503
Surface modification of ZnO nano-particles with Trimetoxyvinyl Silane and Oleic Acid and studying their dispersion in organic media
504
Surface modification of ZnO with Ag improves its photocatalytic efficiency and photostability
505
Surface modification of Zr-based alloys applicable for tritium processing
506
Surface modification of α-alumina support in synthesis of silica membrane for hydrogen purification
507
Surface modification of γ-Al2O3 nano-particles with gum arabic and its applications in adsorption and biodesulfurization
508
Surface modification of γ-Al2O3/TiO2 multilayer membranes for applications in non-polar organic solvents
509
Surface modification of γ-alumina by NaNO2, NaNO3, HNO2, HNO3 and H2SO4: A DFT-D approach
510
Surface modification on a glass surface with a combination technique of sol–gel and air brushing processes
511
Surface modification on highly oriented pyrolytic graphite by slow highly charged ions
512
Surface modification on microfluidic devices with 2-methacryloyloxyethyl phosphorylcholine polymers for reducing unfavorable protein adsorption
513
Surface modification on poly (EGDMA-co-HEMA) synthetic matrices to be used as specific adsorbents
514
Surface modification on polyethylene terephthalate films with 2-methacryloyloxyethyl phosphorylcholine
515
Surface modification on polyurethanes by using bioactive carboxymethylated fungal glucan from Poria cocos
516
Surface modification on silver nanoparticles for enhancing vapor selectivity of localized surface plasmon resonance sensors
517
Surface modification on time-resolved fluorescences of Fe2O3 nanocrystals Original Research Article
518
Surface modification process by electrical discharge machining with a Ti powder green compact electrode
519
Surface modification processes by hypervelocity plasma pulses
520
Surface modification produced by a nitrogen operated plasma focus device: the role of the ion beam in the heating of a substrate
521
Surface modification studies on sulphide minerals using bioreagents
522
Surface modification study of borate materials from B K-edge X-ray absorption spectroscopy
523
Surface modification study of low energy electron beam irradiated polycarbonate film
524
Surface modification technologies IX: Edited by T.S. Sudarshan, W. Reitz and J.J. Stiglich (The Institute of Materials, London, 1996), 608+ pages, $220.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, VT)
525
Surface modification technologies IX: Edited by T.S. Sudarshan, W. Reitz and J.J. Stiglich (The Institute of Materials, London, 1996), 608+ pages, $220.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, VT)
526
Surface Modification Technologies VII: Edited by T. S. Sudarshan, K. Ishizaki, M. Takata, and K. Kamata (The Institute of Materials, London, 1994), 1017 pages, $220.00 (hardback) (available from the Ashgate Publishing Company, Brookfield, VT)
527
surface modification technologies VII: T. S. Sudarshan, Kozo Ishizaki, Masasuke Takata, and Kiichiro Karnata (eds.) (The Institute of Materials, London, 1994), 1003+ pages, $220.00 (available in the U.S.A. from the Ashgate Publishing Company, Brookfield,
528
Surface modification technologies VIII: Edited by T. S. Sudarshan and M. Jeandin (The Institute of Materials, London, 1995), 976 pages, $200.00 (hardcover) (available in the USA from Ashgate Publishing Co., Brookfield, Vermont)
529
Surface modification to improve friction and galling properties of forming tools
530
Surface modification using silanated poly(ethylene glycol)s
531
Surface modification with an antithrombin–heparin complex for anticoagulation: Studies on a model surface with gold as substrate
532
Surface modification with both phosphorylcholine and stearyl groups to adjust hydrophilicity and hydrophobicity
533
Surface modification with BSA blocking based on in situ synthesized gold nanoparticles in poly(dimethylsiloxane) microchip
534
Surface modification with cold plasma application on kaolin and its effects on the adsorption of methylene blue
535
Surface modification with EDTA molecule: A feasible method to enhance the adsorption property of ZnO Original Research Article
536
Surface modification with fibronectin or collagen to improve the cell adhesion
537
Surface modification with multiphilic ligands at detectable well defined active positions of nano-object of giant wheel shaped molybdenum blue showing third-order nonlinear optical properties
538
Surface modification with nitrogen-containing plasmas to produce hydrophilic, low-fouling membranes
539
Surface modification with PEG and hirudin for protein resistance and thrombin neutralization in blood contact
540
Surface modification with peptide for enhancing chondrocyte adhesion and cartilage regeneration in porous scaffolds
541
Surface modification with polyethylene glycol–corn trypsin inhibitor conjugate to inhibit the contact factor pathway on blood-contacting surfaces
542
Surface modification with well-defined biocompatible triblock copolymers: Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface
543
Surface Modification With Zinc and Zn-Ni Alloy Compositionally Modulated Multilayer Coatings Original Research Article
544
Surface modification, characterization and adsorptive properties of a coconut activated carbon
545
Surface Modification, Characterization and Photocatlytic Performance of Nano-Sized Titania modified with Silver and Bentonite clay
546
Surface modification, corrugation and nanostructure formation of high speed railway tracks
547
Surface modification/alloying using intense pulsed electron beam as a tool for improving the corrosion resistance of steels exposed to heavy liquid metals
548
Surface modification-assisted bonding of polymer-based microfluidic devices
549
Surface modifications and adhesion of SBS rubber containing calcium carbonate filler by treatment with UV radiation
550
Surface modifications and cell–materials interactions with anodized Ti
551
Surface modifications and deuterium depth profiles in molybdenum irradiated with low-energy D ions
552
Surface modifications and optical variations of (−1 1 1) lattice oriented CuO nanofilms for solar energy applications
553
Surface modifications by gas plasma control osteogenic differentiation of MC3T3-E1 cells
554
Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers Review Article
555
Surface modifications in the chalcopyrite-sulphite ion system, II. Dithiophosphate collector adsorption study
556
Surface modifications in the chalcopyrite-sulphite ion system. I. collectorless flotation, XPS and dissolution study
557
Surface modifications in tribological contacts
558
Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates
559
Surface modifications induced by ns and sub-ps excimer laser pulses on titanium implant material
560
Surface modifications induced by pulsed-laser texturing—Influence of laser impact on the surface properties
561
Surface modifications induced by shot peening and their effect on the plane bending fatigue strength of a Cr–Mo steel produced by powder metallurgy
562
Surface modifications induced by the friction of graphites against steel
563
Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance
564
Surface modifications induced in 316L steel by laser peening and shot-peening. Influence on pitting corrosion resistance
565
Surface modifications of 316 stainless steel for the improvement of its interface properties with RFGD-deposited fluorocarbon coating
566
Surface modifications of a glass and a glass-ceramic of the MgO-3CaO · P2O5-SiO2 system in a simulated body fluid
567
Surface modifications of a titanium implant by a picosecond Nd:YAG laser operating at 1064 and 532 nm
568
Surface modifications of activated carbon by gamma irradiation
569
Surface modifications of AISI 1045 steel created by high intensity 1064 and 532 nm picosecond Nd:YAG laser pulses
570
Surface modifications of alginate/ poly(L-lysine) microcapsular membranes with poly(ethylene glycol) and poly(vinyl alcohol)
571
Surface modifications of aluminum alloy 5052 for bipolar plates using an electroless deposition process
572
Surface modifications of Al–Zn–Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric
573
Surface modifications of carbon nanotube/polyacrylonitrile composite films by proton beams
574
Surface modifications of crystalline silicon created by high intensity 1064 nm picosecond Nd:YAG laser pulses
575
Surface modifications of EVA copolymers by using RF oxidizing and non-oxidizing plasmas
576
Surface modifications of functional electrodes of a light addressable potentiometric sensor (LAPS): non-dependency of pH sensitivity on the surface functional group
577
Surface modifications of Ga2O3 thin film sensors with Rh, Ru and Ir clusters
578
Surface modifications of gasketless carbon composite bipolar plates for gas tightness of PEM fuel cells
579
Surface modifications of glass-reinforced hydroxyapatite composites
580
Surface modifications of ITO electrodes for polymer light-emitting devices
581
Surface modifications of nanocarriers for effective intracellular delivery of anti-HIV drugs
582
Surface modifications of Nitinol for biomedical applications
583
Surface modifications of photocrosslinked biodegradable elastomers and their influence on smooth muscle cell adhesion and proliferation
584
Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma
585
Surface modifications of polypropylene membranes used for blood filtration
586
Surface modifications of TiN coating by the pulsed TEA CO2 and KrCl laser
587
Surface modifications of TiN coating by pulsed TEA CO2 and XeCl lasers
588
Surface modifications of vulcanized SBR rubber by treatment with atmospheric pressure plasma torch
589
Surface modifications of γ-Al2O3, SiO2 and SnO2 supports by titania grafting and their influence in the catalytic combustion of methane
590
Surface modifications on InAs decrease indium and arsenic leaching under physiological conditions
591
Surface modified and functionalized polyaniline and polypyrrole films
592
Surface modified and medicated polyurethane materials capable of controlling microorganisms causing foot skin infection in athletes
593
Surface modified BaTiO3 nanoparticles as the matrix for phospholipids and as extracting probes for LLME of hydrophobic proteins in Escherichia coli by MALDI–MS
594
Surface modified BaTiO3 thick film resistors as H2S gas sensors
595
Surface modified bimetallic catalysts: Preparation, characterization, and applications Review Article
596
Surface modified capillary electrophoresis combined with in solution isoelectric focusing and MALDI-TOF/TOF MS: A gel-free multidimensional electrophoresis approach for proteomic profiling—Exemplified on human follicular fluid
597
Surface modified carbon cloth for use in electrochemical capacitor
598
Surface Modified Carvacrol-rich Satureja khuzestanica Essential Oil Nanoemulsion: A Novel Paclitaxel Formulation Induced Apoptosis on Paclitaxel-Resistant Breast Cancer Cells
599
Surface Modified Cobalt Ferrite Nanoparticles with Cationic Surfactant: Synthesis, Multicomponent Dye Removal Modeling and Selectivity Analysis
600
Surface modified Fe3O4 nanoparticles as a protein delivery vehicle
601
Surface modified fluorescent quantum dots with neurotransmitter ligands for potential targeting of cell signaling applications
602
Surface modified glass beads as model carriers in dry powder inhalers—Influence of drug load on the fine particle fraction
603
Surface modified ground rubber tire by grafting acrylic acid for paving applications
604
Surface modified latex particles: Synthesis and self-assembling into photonic crystals
605
Surface modified long-life electrode for resistance spot welding of Zn-coated steel
606
Surface modified microelectrodes for selective electroanalysis of metal ions in environmental components
607
Surface modified microfiltration membranes with molecularly recognising properties
608
Surface modified multifunctional nanomedicines for simultaneous imaging and therapy of cancer
609
Surface modified multiwalled carbon nanotube based molecularly imprinted polymer for the sensing of dopamine in real samples using potentiometric method
610
Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites
611
Surface modified Nafion® membrane by ion beam bombardment for fuel cell applications
612
Surface modified nano-hydroxyapatite/poly(lactide acid) composite and its osteocyte compatibility
613
Surface Modified Nanomagnetite-Assisted Hollow Fiber Solid/ Liquid Phase Microextraction for Pre-concentration and Determination of Palladium in Water Samples by Differential Pulse Voltammetry
614
Surface modified Ni foam as current collector for syngas solid oxide fuel cells with perovskite anode catalyst
615
Surface modified nonwoven polysulphone (PSU) fiber mesh by electrospinning: A novel affinity membrane
616
Surface modified polymeric membranes to reduce (bio)fouling: a microbiological study using E. coli Original Research Article
617
Surface modified silver selinide nanoparticles as extracting probes to improve peptide/protein detection via nanoparticles-based liquid phase microextraction coupled with MALDI mass spectrometry
618
Surface modified silver-carbonate mixed conducting membranes for high flux CO2 separation with enhanced stability
619
Surface modified tool fabricated by radical nitriding
620
Surface modifying of microporous PTFE capillary for bilirubin removing from human plasma and its blood compatibility
621
Surface moisture and energy exchange from a restored peatland, Québec, Canada
622
Surface molecular diffusion in latex films observed by atomic force microscopy
623
Surface molecular dynamics simulation with two orthogonal surface steps: how to beat the particle conservation problem
624
Surface molecular dynamics simulation with two orthogonal surface steps: how to beat the particle conservation problem
625
Surface molecular orientation of poly(2-vinylnaphalene) thin films: ARUPS and NEXAFS studies
626
Surface molecularly imprinted polymers with synthetic dummy template for simultaneously selective recognition of nine phthalate esters
627
Surface Molecules Essential for Positive Selection Are Retained but Interfered in Thymic Epithelial Cells after Monolayer Culture
628
Surface molybdenizing on titanium by halide-activated pack cementation
629
Surface morphological changes induced in catalysts by acoustic waves
630
Surface morphological features of boulders on Asteroid 25143 Itokawa
631
Surface morphological influence on charging at metal–insulator interface in XPS depth profiling
632
Surface morphological response of crystalline solids to mechanical stresses and electric fields
633
Surface morphological structures and electrochemical activity properties of iridium–niobium binary alloy electrodes
634
Surface morphological studies of green InGaN/GaN multi-quantum wells grown by using MOCVD
635
Surface morphological, mechanical and thermal characterization of electron beam irradiated fibers
636
Surface morphological, microstructural, and electrochromic properties of short-range ordered and crystalline nickel oxide thin films
637
Surface Morphological, Topological and Crystallinity Characteristics of Sputtered BariumStrontium Titanate Thin Films on Sapphire Substrates
638
Surface morphologies and electrical properties of antimony-doped tin oxide films deposited by plasma-enhanced chemical vapor deposition
639
Surface morphologies and floatability of sand-blasted quartz particles
640
Surface morphologies and properties of pure and antimony-doped tin oxide films derived by sol–gel dip-coating processing
641
Surface morphologies due to grooves at moving grain boundaries having stress-driven fluxes
642
Surface morphologies of anthracene single crystals grown from vapor phase
643
Surface morphologies of excimer-laser annealed BF2+ implanted Si diodes
644
Surface morphologies of homoepitaxial ZnO thin films on non-miscut ZnO substrates
645
Surface morphologies of III-V based magnetic semiconductor Ga,Mn/As grown by molecular beam epitaxy
646
Surface morphologies of MOCVD-grown GaN films on sapphire studied by scanning tunneling microscopy
647
Surface morphologies of SnO2(1 1 0)
648
Surface morphologies of spectrally selective and polarization-dependent angular optical reflectors of SnOx:F-coated anodized aluminum
649
Surface morphologies, tribological properties, and formation mechanism of the Ni–CeO2 nanocrystalline coatings on the modified surface of TA2 substrate
650
Surface morphologies—Equilibria and transient states
651
Surface morphology alignment of block copolymers induced by injection molding
652
Surface morphology and calcium control in myocytes from a rat MI model of heart failure
653
Surface morphology and chemical composition of lamb’s lettuce (Valerianella locusta) after exposure to a low-pressure oxygen plasma
654
Surface morphology and chemical ordering in FePd/Pd(0 0 1) thin layers
655
Surface morphology and chemical states of highly oriented PbZrO3 thin ®lms prepared by a sol±gel process
656
Surface morphology and composition of c-, a- and m-sapphire surfaces in O2 and H2 environments
657
Surface morphology and composition of some ‘‘lustro’’ decorated fragments of ancient ceramics from Deruta Central Italy/q
658
Surface morphology and compositional variations in molecular beam epitaxy grown GaNxAs1−x alloys
659
Surface morphology and conductivity of zirconium-doped nanostructured indium oxide films with various crystallographic features
660
Surface morphology and crystal growth mechanism of gibbsite in industrial Bayer liquors
661
Surface morphology and crystalline structure of high-stable polycrystalline transparent conductive zinc oxide films
662
Surface Morphology and Crystallinity of Metal Oxides in Nickel-Cobalt Binary System (Morfologi Permukaan dan Kehabluran Oksida Logam dalam Sistem Biner Nikel-Kobalt)
663
Surface morphology and current–voltage characteristics of monolayer Langmuir–Blodgett films of conjugated organic molecules
664
Surface morphology and deuterium retention in tungsten oxide layers exposed to low-energy, high flux D plasma
665
Surface morphology and dewettability of self-organized thermosets involving epoxy and POSS-capped poly(ethylene oxide) telechelics
666
Surface morphology and electron transport correlation in thin iron films
667
Surface morphology and electronic state characterization of Ni–P amorphous alloy films
668
Surface morphology and electronic structure of Ge/Si(1 1 1) 7 7 system
669
Surface morphology and ferroelectric properties of compositional gradient PZT thin films prepared by chemical solution deposition process
670
Surface morphology and field emission characteristics of carbon nanofiber films grown by chemical vapor deposition on alloy catalyst
671
Surface morphology and Flory–Huggins interaction strength in UCST blend system comprising poly(4-methyl styrene) and isotactic polystyrene
672
Surface morphology and formation of GaAs nanocrystals by laser-induced etching: SEM, PL and Raman studies
673
Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs
674
Surface morphology and helium retention on tungsten exposed to low energy and high flux helium plasma
675
Surface morphology and in vitro release performance of double-walled PLLA/PLGA microspheres entrapping a highly water-soluble drug
676
Surface morphology and in-situ observation on the oxidation behavior of carbon materials by laser microscopy
677
Surface morphology and interaction between water and MgO, CaO and SrO surfaces Periodic HF and DFT calculations
678
Surface morphology and interdiffusion of LiF in Alq3-based organic light-emitting devices
679
Surface morphology and interdiffusion of LiF in Alq3-based organic light-emitting devices
680
Surface morphology and local magnetic properties of electrodeposited thin iron layers
681
Surface morphology and luminescence characterization of β-FeSi2 thin films prepared by pulsed laser deposition
682
Surface morphology and mechanical properties of nanoscale TiAlN/SiNx multilayer coating deposited by reactive magnetron sputtering
683
Surface morphology and mechanical properties of new-generation flowable resin composites for dental restoration
684
Surface morphology and nucleation of infinite-layer (Sr,Ca)CuO2 films on atomically flat SrTiO3 (100) substrates studied by atomic force microscopy
685
Surface morphology and optical properties of ZnO epilayers grown on Si(1 1 1) by metal organic chemical vapor deposition
686
Surface morphology and optical property of 1.3 μm In0.5Ga0.5As/GaAs self-organized quantum dots grown by MBE
687
Surface morphology and pervaporation performance of electric field enhanced multilayer membranes
688
Surface morphology and phase transformations of femtosecond laser-processed sapphire
689
Surface morphology and photoelectric properties of fluorine-doped tin oxide thin films irradiated with 532 nm nanosecond laser
690
Surface morphology and photoluminescence of InAs quantum dots grown on [11~0]-oriented streaked islands under ultra-low V/III ratio
691
Surface morphology and photoluminescence of InAs quantum dots grown on [11~0]-oriented streaked islands under ultra-low V/III ratio
692
Surface morphology and property of UV‑cured flm containing photopolymerizable polysiloxane‑based nanogels with initiating capability
693
Surface morphology and Raman scattering in GaAs/InAs(111) heterostructures grown by MOVPE
694
Surface morphology and Raman scattering in GaAs/InAs(111) heterostructures grown by MOVPE
695
Surface morphology and reaction at Cu/Si interface—Effect of native silicon suboxide
696
Surface morphology and reconstruction changes during heteroepitaxial growth of InAs on GaAs(0 0 1)-(2×4)
697
Surface morphology and reconstruction changes during heteroepitaxial growth of InAs on GaAs(0 0 1)-(2×4)
698
Surface morphology and removal rates for dry- and wet-etched novel resonator materials Part I: La Ga Ta O 3 5.5 0.5 14
699
Surface morphology and removal rates for dry- and wet-etched novel resonator materials Part II. La Ga Nb O 3 5.5 0.5 14
700
Surface morphology and step fluctuations on Ag nanowires
701
Surface morphology and strain relaxation of InAlAs buffer layers grown lattice mismatched on GaAs with inverse steps
702
Surface morphology and structural observation of laser interference crystallized a-Si:Hra-SiN :H multilayers
703
Surface morphology and structure modification of silicon layers induced by nanosecond laser radiation
704
Surface morphology and structure of Ni–P, Ni–P–ZrO2, Ni–W–P, Ni–W–P–ZrO2 coatings deposited by electroless method
705
Surface morphology and structure of the bare and InAs-covered GaAs(3̄ 1̄ 5̄)B surface
706
Surface morphology and the phase formation at Cr/Si system
707
Surface morphology and the response of piezoelectric gas sensors
708
Surface morphology and tribological behavior of AlSi10 alloys treated by plasma immersion ion implantation for automotive applications
709
Surface morphology and tribological properties of DC sputtered nanoscale multilayered TiAlN/CNx coatings
710
Surface morphology and wetting properties of surfaces coated with an amphiphilic diblock copolymer
711
Surface morphology changes due to adsorbates and due to electron bombardment
712
Surface morphology changes during initial usage of hydrophobic, microporous polypropylene membranes
713
Surface morphology changes during Pb deposition on Cu(1 0 0): evidence for surface alloyed Cu(1 0 0)–c(2×2) Pb
714
Surface morphology changes in polythiophene and polythiophene derivative films after being oxidized with iodine. A scanning probe microscopy study
715
Surface morphology changes on silica-coated gold colloids
716
Surface morphology characterization of pentacene thin film and its substrate with under-layers by power spectral density using fast Fourier transform algorithms
717
Surface morphology control of epitaxial silicon films grown by hot wire chemical vapor deposition using hydrogen dilution
718
Surface morphology control of immiscible polymer-blend thin films
719
Surface morphology due to enhanced migration in heteroepitaxial growth of compound semiconductors
720
Surface morphology due to enhanced migration in heteroepitaxial growth of compound semiconductors
721
Surface morphology effects on the light-controlled wettability of ZnO nanostructures
722
Surface morphology evolution and properties of silicon coating on silicon carbide ceramics by advanced plasma source ion plating
723
Surface morphology evolution during electrodeposition of amorphous CoP films
724
Surface morphology evolution of CeO2/YSZ (001) buffer layers fabricated via magnetron sputtering
725
Surface morphology evolution of poly(styrene-block-4-vinylpyridine) (PS-b-P4VP)(H+) and poly(methyl methacrylate)-dibenzo-18-crown-6-poly(methyl methacrylate) (PMCMA) supramolecular film
726
Surface morphology for ion-beam sputtered Al layer with varying sputtering conditions
727
Surface morphology in amorphous Fe–Mo–Cu–B ribbon system
728
Surface morphology in engineering applications: Influence of roughness on sliding and wear in dry fretting
729
Surface morphology manipulation and wear property of bioceramic oxide coatings on titanium alloy
730
Surface morphology of (Hg,Re)Ba/sub 2/CaCu/sub 2/O/sub y/ thin films prepared by pulsed laser deposition
731
Surface morphology of a die-cast Mg alloy
732
Surface morphology of a laser surface nitrided and etched Ti–6Al–4V alloy
733
Surface morphology of active normal faults in hard rock: Implications for the mechanics of the Asal Rift, Djibouti
734
Surface morphology of antiferromagnetic Fe50Mn50 layers on Cu(0 0 1)
735
Surface morphology of as-deposited and illuminated As–Se chalcogenide thin films
736
Surface morphology of cellulose films prepared by spin coating on silicon oxide substrates pretreated with cationic polyelectrolyte
737
Surface morphology of commercial carbon blacks and carbon blacks from pyrolysis of used tyres by small-angle X-ray scattering Original Research Article
738
Surface morphology of c-plane sapphire (α-alumina) produced by high temperature anneal
739
Surface morphology of cubic and wurtzite GaN films
740
Surface Morphology of Cus Thin Films Observed by Atomic Force Microscopy
741
Surface morphology of DyxOy films grown on Si
742
Surface morphology of epitaxial lattice-matched Ba0.7Sr0.3O on Si(0 0 1) and vicinal Si(0 0 1)-4°[1 1 0] substrates
743
Surface morphology of Ga adsorbed Si(1 1 3) surface
744
Surface morphology of GaN grown by molecular beam epitaxy
745
Surface morphology of GaN nanorods grown by catalyst-free hydride vapor phase epitaxy
746
Surface morphology of Ge layers epitaxially grown on bare and oxidized Si(001) and Si(111) substrates
747
Surface morphology of Hägg iron carbide (χ-Fe5C2) from ab initio atomistic thermodynamics
748
Surface morphology of Hg0.8Cd0.2Te epilayers grown by LPE using horizontal slider
749
Surface morphology of hybrids of double-stranded DNA and single-walled carbon nanotubes studied by atomic force microscopy
750
Surface Morphology of In0.5Ga0.5 Quantum Dots Grown using Stranski-Krastanov Growth Mode
751
Surface morphology of iron dendrites in the Yanzhuang H6 meteorite
752
Surface morphology of laser tracks used for forming the non-smooth biomimetic unit of 3Cr2W8V steel under different processing parameters
753
Surface morphology of low temperature grown GaAs on singular and vicinal substrates
754
Surface morphology of magnesium alloy irradiated by high-intensity pulsed ion beam
755
Surface morphology of metal films deposited on mica at various temperatures observed by atomic force microscopy
756
Surface morphology of Mn+ implanted Ge(1 0 0): A systematic investigation as a function of the implantation substrate temperature
757
Surface morphology of MnAs overlayers grown by MBE on GaAs 111/B substrates
758
Surface morphology of MnSi thin films grown on Si(111)
759
Surface morphology of nanostructured anatase thin films prepared by pulsed liquid injection MOCVD
760
Surface morphology of NiMo/Al2O3 catalysts incorporated with boron and phosphorus: Experimental and simulation Original Research Article
761
Surface morphology of NiO layers on MgO(0 0 1), MgO(1 1 0) and MgO(1 1 1)
762
Surface morphology of organic thin films
763
Surface morphology of organic thin films at various vapor flux
764
Surface morphology of polyethylene glycol films produced by matrix-assisted pulsed laser evaporation (MAPLE): Dependence on substrate temperature
765
Surface morphology of PS–PDMS diblock copolymer films
766
Surface morphology of S or Se terminated GaAs(111)B
767
Surface morphology of self-assembled vertically stacked InAs quantum dots by atomic force microscopy
768
Surface morphology of self-assembled vertically stacked InAs quantum dots by atomic force microscopy
769
Surface morphology of self-assembled vertically stacked InAs quantum dots by atomic force microscopy
770
Surface morphology of Si layers grown on SiO2
771
Surface morphology of silica nanowires at the nanometer scale
772
Surface morphology of SiO2 on a Si(1 1 1) 7×7 surface formed after alternating exposure to caesium and oxygen and subsequent annealing
773
Surface morphology of spatiotemporal stripe patterns formed by Ag/Sb co-electrodeposition
774
Surface morphology of spin-coated As–S–Se chalcogenide thin films
775
Surface morphology of sputter deposited W–Si–N composite coatings characterized by atomic force microscopy
776
Surface morphology of sputtered NiTi-based shape memory alloy thin films
777
Surface morphology of the {0 0 1} cleavage faces of potassium bichromate single crystals
778
Surface morphology of thin lysozyme films produced by matrix-assisted pulsed laser evaporation (MAPLE)
779
Surface morphology of three-dimensional Si islands on Si(0 0 1) surfaces
780
Surface morphology of yttrium silicides epitaxially grown on Si(1 1 1) by STM
781
Surface morphology of yttrium silicides epitaxially grown on Si(1 1 1) by STM
782
Surface morphology of α-SIC coatings deposited by RF magnetron sputtering
783
Surface morphology reconstruction of free falling films at high Reynolds numbers
784
Surface morphology studies of laser irradiated and chemically metalized polyamide composites
785
Surface Morphology Studies of Low Carbon Steel Treated in Aqueous Lignin
786
Surface Morphology Study of Chemical Vapor Transport ofZnO Crystals
787
Surface morphology study of fluorocarbon macromolecule deposited on polyimide substrates
788
Surface Morphology Study on Aluminum Alloy after Treated with Silicate-Based Corrosion Inhibitor from Paddy Residue
789
Surface morphology study on chromium oxide growth on Cr films by Nd-YAG laser oxidation process
790
Surface morphology, chemical contrast, and ferroelectric domains in TGS bulk single crystals differentiated with UHV non-contact force microscopy
791
Surface morphology, cohesive and adhesive properties of amorphous hydrogenated carbon nanocomposite films
792
Surface morphology, growth rate and quality of diamond films synthesized in hot filament CVD system under various methane concentrations
793
Surface morphology, nano-indentation and TEM analysis of tantalum carbide–graphite composite film synthesized by hot-filament chemical vapor deposition
794
Surface morphology, structure, magnetic and electrical transport properties of reactive sputtered polycrystalline Ti1−xFexN films
795
Surface mosaic map unit development for a desert pavement surface
796
Surface motion of mountain glaciers derived from satellite optical imagery
797
Surface mould growth on five modified wood substrates coated with three different coating systems when exposed outdoors
798
Surface movement errors in shank kinematics and knee kinetics during gait
799
Surface movement ground control by means of a GPS–GIS system
800
Surface movements in Bologna (Po Plain — Italy) detected by multitemporal DInSAR
801
Surface multifragmentation investigated with a finite temperature spherical TDHF model
802
Surface multifragmentation investigated with a finite temperature spherical TDHF model Original Research Article
803
Surface muscle pressure as a measure of active and passive behavior of muscles during gait
804
Surface mycobiota on Argentinean dry fermented sausages
805
Surface mycoflora of a Spanish fermented meat sausage and toxigenicity of Penicillium isolates
806
Surface NADH Oxidase of HeLa Cells Lacks Intrinsic Membrane Binding Motifs
807
Surface nano/micro functionalization of PMMA thin films by 157 nm irradiation for sensing applications
808
Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants
809
Surface nanocrystal hydrogen-bonded complex for photochemical water splitting
810
Surface nanocrystallization and its properties of a rare earth magnesium alloy induced by HVOF–SMB
811
Surface nanocrystallization by surface mechanical attrition treatment and its effect on structure and properties of plasma nitrided AISI 321 stainless steel Original Research Article
812
Surface nanocrystallization induced by shot peening and its effect on corrosion resistance of 1Cr18Ni9Ti stainless steel
813
Surface nanocrystallization mechanism of a rare earth magnesium alloy induced by HVOF supersonic microparticles bombarding
814
Surface nanocrystallization modification of anhydrite
815
Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening
816
Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening
817
Surface nanocrystallization of Al-plated steel for application in the exhaust system of vehicles
818
Surface nanocrystallization of aluminium alloy by controlled ball impact technique
819
Surface nanocrystallization of Cu and Ta by sliding friction
820
Surface nanocrystallization of hydroxyapatite coating
821
Surface nanocrystallization of iron induced by ultrasonic shot peening
822
Surface nanocrystallization of Ni3Al by surface mechanical attrition treatment
823
Surface nanocrystallization, austenization and hardening of medium carbon steel by an explosive impact technique
824
Surface nanodeformations caused by ultrashort laser pulse
825
Surface nano-functionalization of biomaterials
826
Surface nanoporosity of β-type Ti–25Nb–25Zr alloy for the enhancement of protein adsorption and cell response
827
Surface nanoscale imaging of collagen thin films by Atomic Force Microscopy
828
Surface nano-structural modifications and characteristics in nitrogen ion implanted W as a function of temperature and N+ energy
829
Surface nanostructure and amorphous state of a low carbon steel induced by high-current pulsed electron beam
830
Surface nanostructure of a directionally solidified Ni-based superalloy DZ4 induced by high intensity pulsed ion beam irradiation
831
Surface nanostructure of Hevea brasiliensis natural rubber latex particles
832
Surface nano-structured particles and characterization
833
Surface nano-structuring of reverse osmosis membranes via atmospheric pressure plasma-induced graft polymerization for reduction of mineral scaling propensity
834
Surface nature of nanoparticle gold/iron oxide aerogel catalysts
835
Surface nature of nanoparticle zinc-titanium oxide aerogel catalysts
836
Surface nitridation induced AlN nano-columnar growth on c-sapphire
837
Surface nitridation of nickel using hydrazoic acid (HN3) and nitrogen ion implantation
838
Surface nitridation of titanium by pulsed Nd:YAG laser irradiation
839
Surface nitriding influence on the fatigue life behavior of ASTM A743 steel type CA6NM
840
Surface nitriding of graphite substrate by plasma focus device towards synthesis of carbon nitride coating
841
Surface nitriding of Ti–6Al–4V alloy with a high power CO2 laser
842
Surface nitriding of titanium in arc plasma
843
Surface nitriding on Ti–6Al–4V alloy via friction stir processing method under nitrogen atmosphere
844
Surface NMR measurement of proton relaxation times in medium to coarse-grained sand aquifer
845
Surface NMR sounding and inversion to detect groundwater in key aquifers in England: comparisons with VES–TEM methods
846
Surface noble gas recycling to the terrestrial mantle
847
Surface nuclear magnetic relaxation and dynamics of water and oil in granular packings and rocks
848
Surface nucleation and growth in Anorthite glass
849
Surface Nucleation of Superconductivity in 3-Dimensions
850
Surface nutrient enrichment in the California Current off Southern California: description and possible causes
851
Surface observation and measurement techniques to study the fatigue damage micromechanisms in a duplex stainless steel
852
Surface observation of Langmuir—Blodgett films of polyamic acid alkylamine salts and polyimide by atomic force microscopy and friction force microscopy
853
Surface observation of LaNiO3/MgO (100) structure
854
Surface observation of P-Sic substrate after negative bias treatment in diamond deposition
855
Surface observations of a powder layer during the damage process under particulate lubrication
856
Surface ocean pH response to variations in pCO2 through two full glacial cycles
857
Surface oceanic fronts between Africa and Antarctica
858
Surface oceanography of BROKE-West, along the Antarctic margin of the south-west Indian Ocean ()
859
Surface octanoylation of high-amylose potato starch films
860
Surface of a calcium aluminosilicate glass by classical and ab initio molecular dynamics simulations
861
surface of crystalline Si
862
Surface of TiO during atomic layer deposition as determined by 2 incremental dielectric reflection
863
Surface of water films and nonodroplets: Structure, dynamics and forces
864
Surface of Zn–Mn–O and its role in room temperature ferromagnetism: An XPS analysis
865
Surface operator content of the AL face models
866
Surface order and structure studies of polymer–solid interface
867
Surface order dependent magnetic thin film growth: Fe on GaN(0 0 0 1)
868
Surface order large deviations for 2D FK-percolation and Potts models
869
Surface order large deviations of phase interfaces for the continuum Widom-Rowlinson model in high density limit
870
Surface ordering near the smectic-A-smectic-C transition in thin, free-standing, liquid-crystal films
871
Surface ordering of a rod-coil block molecule on the water subphase
872
Surface organic modification of inorganic substrates by plasma deposition of tin oxide organic-like thin films and grafting polymerization
873
Surface organization of single hyperbranched polymer molecules, as studied by atomic force microscopy
874
Surface Organometallic Chemistry of Tin: Grafting Reaction of Sn(CH3)4 in HY Zeolite Supercage
875
Surface organometallic chemistry of vanadium(V): reactivity of (ButN)VNp3 towards silica
876
Surface Organometallic Chemistry on Metals Applied to the Environment: Hydrogenolysis of AsPh3 with Nickel Supported on Alumina
877
Surface organometallic chemistry: Facile μ2-carbene to μ3-carbyne transformation of organocobalt carbonyls on silica surface
878
Surface organometallic chemistry: reaction of alkyne vapours with [Ru3(CO)12] supported on inorganic oxides
879
Surface orientation and complex formation of new calixarene derivatives containing sulfur ligands
880
Surface orientation dependent oxidation behavior of aluminized DS CM 247 LC nickel-base superalloy
881
Surface orientation effect of asymmetric polyimide hollow fibers on their gas transport properties
882
Surface orientation in ionic liquids
883
Surface oscillation and jetting from surface attached acoustic driven bubbles
884
Surface oscillation and jetting from surface attached acoustic driven bubbles
885
Surface oscillations in channeled snow flows
886
Surface Oscillations of an Electromagnetically Levitated Droplet
887
Surface oxidability of pure liquid metals and alloys
888
Surface oxidation and effect of electric field on dispersion and colloids stability of multiwalled carbon nanotubes
889
Surface oxidation and thin film preparation of AlCuFe quasicrystals
890
Surface oxidation behavior of MgNd alloys
891
Surface oxidation inside of macroscopic porous polymeric materials
892
Surface oxidation kinetics of Cr film by Nd-YAG laser
893
Surface oxidation kinetics of Cr film by Nd-YAG laser
894
Surface oxidation of a Melinex 800 PET polymer material modified by an atmospheric dielectric barrier discharge studied using X-ray photoelectron spectroscopy and contact angle measurement
895
Surface oxidation of a Nb(100) single crystal by scanning tunneling microscopy
896
Surface oxidation of activated carbon pellets by hydrogen peroxide for preparation of CO2 adsorbent
897
Surface oxidation of activated electrospun carbon nanofibers and their adsorption performance for benzene, butanone and ethanol
898
Surface oxidation of Al masks for deep dry-etch of silica optical waveguides
899
Surface oxidation of Al±Cr±Fe alloys characterized by X-ray photoelectron spectroscopy
900
Surface oxidation of amorphous Zr65Cu17.5Ni10Al7.5 and Zr46.75Ti8.25Cu7.5Ni10Be27.5
901
Surface oxidation of amorphous Zr65Cu17.5Ni10Al7.5 and Zr46.75Ti8.25Cu7.5Ni10Be27.5
902
Surface oxidation of basalt glass/liquid
903
Surface oxidation of CdTe nanocrystals—A high resolution core-level photoelectron spectroscopy study
904
Surface oxidation of Co2+ and its dependence on ligand coordination number in silica polyamine composites
905
Surface oxidation of donor heteroatoms in crystalline fullerene-donor compounds
906
Surface oxidation of iron nanoparticles
907
Surface oxidation of liquid Sn
908
Surface oxidation of monodisperse SnOx nanoparticles
909
Surface oxidation of NiCo alloy: A comparative X-ray photoelectron spectroscopy study in a wide pressure range
910
Surface oxidation of NiTi shape memory alloy
911
Surface oxidation of NiTi shape memory alloy in a boiling aqueous solution containing hydrogen peroxide
912
Surface oxidation of NiTi shape memory alloy in a boiling aqueous solution containing hydrogen peroxide
913
Surface oxidation of pyrite under ambient atmospheric and aqueous (pH = 2 to 10) conditions: electronic structure and mineralogy from X-ray absorption spectroscopy
914
Surface Oxidation of Synthetic Pyrrhotite During Wetting-Drying Treatment
915
Surface oxidation of Zircaloy-4 at 600 K by adsorbed oxygen, nitric oxide, and sulfur dioxide
916
Surface oxidation state of combustion-synthesized γ-Fe2O3 nanoparticles determined by electron energy loss spectroscopy in the transmission electron microscope
917
Surface oxide cracking associated with oxidation-induced grain boundary sliding in the underlying alloy Original Research Article
918
Surface oxide debonding in field assisted powder sintering
919
Surface oxide debonding in field assisted powder sintering
920
Surface oxide fracture in cold aluminium rolling Original Research Article
921
Surface oxide in replicated microcellular aluminium and its influence on the plasticity size effect Original Research Article
922
Surface oxide net charge of a titanium alloy: Comparison between effects of treatment with heat or radiofrequency plasma glow discharge
923
Surface oxide net charge of a titanium alloy: Modulation of fibronectin-activated attachment and spreading of osteogenic cells
924
Surface oxides of Ir(111) prepared by gas-phase oxygen atoms
925
Surface oxides of Ir(111) prepared by gas-phase oxygen atoms
926
Surface oxides of the oxygen–copper system: Precursors to the bulk oxide phase?
927
Surface oxides on carbon and their analysis: a critical assessment Original Research Article
928
Surface oxides on supported Rh particles: thermal decomposition of Rh oxide under high vacuum conditions
929
Surface oxidized carbon fibers: II. Chemical modification Original Research Article
930
Surface oxygen and electrical resistance of YBa2Cu4O8
931
Surface oxygen complexes as governors of neopentane sorption in multiwalled carbon nanotubes Original Research Article
932
Surface oxygen exchange between yttria-stabilised zirconia and a low-temperature oxygen rf-plasma
933
Surface oxygen in catalysts based on transition metal oxides: What can we learn from cluster DFT calculations?
934
Surface oxygenation of polypropylene using an air dielectric barrier discharge: the effect of different electrode–platen combinations
935
Surface oxygenation studies on (1 0 0)-oriented diamond using an atom beam source and local anodic oxidation
936
Surface ozone and NOx concentrations at a high altitude Mediterranean site, Greece
937
Surface ozone at four remote island sites and the preliminary assessment of the exceedances of its critical level in Japan
938
Surface ozone at the Devils Postpile National Monument receptor site during low and high wildland fire years
939
Surface ozone at the Swiss Alpine site Arosa: the hemispheric background and the influence of large-scale anthropogenic emissions
940
Surface ozone background in the United States: Canadian and Mexican pollution influences
941
Surface ozone behaviour at rural sites in Portugal
942
Surface ozone concentration and its behaviour with aerosols in the northwestern Himalaya, India
943
Surface ozone concentration trends and its relationship with weather types in Spain (2001–2010)
944
Surface ozone concentrations in Eastern Highlands of Zimbabwe
945
Surface ozone during a winter when coal fired heat was used in the urban area of Jinan, China
946
Surface ozone enhancements in the south of Brazil owing to large-scale air mass transport
947
Surface ozone in Joshua Tree National Park
948
Surface ozone in Spain
949
Surface ozone in the Indian region
950
Surface ozone in the White Mountains of California
951
Surface ozone in Yosemite National Park
952
Surface ozone measurements at tropical rural coastal station Tranquebar, India
953
Surface ozone mixing ratio increase with altitude in a transect in the Catalan Pyrenees
954
Surface ozone over southern Africa: synthesis of monitoring results during the Cross border Air Pollution Impact Assessment project
955
Surface ozone photolysis rate trends in the Eastern Mediterranean: Modeling the effects of aerosols and total column ozone based on Terra MODIS data
956
Surface ozone study in campinas, Sao Paulo, Brazil
957
Surface Ozone Trend in Major Rice Growing Areas in Malaysia
958
Surface ozone: A likely threat to crops in Yangtze delta of China
959
Surface ozone-temperature relationships in the eastern US: A monthly climatology for evaluating chemistry-climate models
960
Surface particle motions in rotating cylinders: Validation and similarity for an industrial scale kiln
961
Surface particularities in pulsed laser ablation/deposition of the ferromagnetic alloy NiMnSb
962
Surface partition of ion energy during the growth of TiNx thin films
963
Surface passivant effects on electronic states of the band edge in Si-nanocrystals
964
Surface passivation and characterization of cobalt–ferrite nanoparticles
965
Surface passivation and enhanced quantum-size effect and photo stability of coated CdSe/CdS nanocrystals
966
Surface passivation and morphology of GaAs(1 0 0) treated in HCl-isopropanol solution
967
Surface passivation at low temperature of p- and n-type silicon wafers using a double layer a-Si:H/SiNx:H
968
Surface passivation by L-arginine and enhanced optical properties of CdS quantum dots co-doped with Nd3+–Li+
969
Surface passivation for germanium photovoltaic cells
970
Surface passivation function of indium-tin-oxide-based nanorod structural sensors
971
Surface passivation in high efficiency silicon solar cells
972
Surface passivation of a microfluidic device to glial cell adhesion: a comparison of hydrophobic and hydrophilic SAM coatings
973
Surface passivation of crystalline silicon wafer via hydrogen plasma pre-treatment for solar cells
974
Surface passivation of epoxy resin with a covalently adhered poly(tetrafluoroethylene) layer
975
Surface passivation of GaAs by ultra-thin cubic GaN layer
976
Surface passivation of GaAs with ultrathin Si3N4/Si interface control layer formed by MBE and in situ ECR plasma nitridation
977
Surface passivation of III–V semiconductors for future CMOS devices—Past research, present status and key issues for future
978
Surface passivation of In0.83Ga0.17As photodiode with high-quality SiN layer fabricated by ICPCVD at the lower temperature
979
Surface passivation of InGaP/GaAs HBT using silicon-nitride film deposited by ECR–CVD plasma
980
Surface passivation of silicon with the Plasmodul®
981
Surface passivation optimization using DIRECT
982
Surface passivation technology for III–V semiconductor nanoelectronics
983
Surface passivation using oligo(ethylene glycol) in ATRP-assisted DNA detection
984
Surface passivation: The effects of CDCA co-adsorbent and dye bath solvent on the durability of dye-sensitized solar cells
985
Surface pasteurisation of chicken carcasses using hot water Original Research Article
986
Surface pasteurisation of poultry meat using steam at atmospheric pressure Original Research Article
987
Surface pasteurisation of shell eggs Original Research Article
988
Surface pattern recording in amorphous chalcogenide layers
989
Surface pattern recording in Sb2Se3 thin films
990
Surface patterning and its application in wetting/dewetting studies
991
Surface patterning of micron-sized aluminum flakes by seeded dispersion polymerization: Towards waterborne colored pigments by gold nanoparticles adsorption
992
Surface patterning on insulators upon femtosecond laser ablation
993
Surface patterning with carbon thin films by nanosphere lithography
994
Surface patterns due to step flow anisotropy formed in crystal growth process
995
Surface patterns induced by laser irradiation on thin polymer bilayer films
996
Surface patterns of block copolymers in thin layers after vapor treatment
997
Surface patterns of zooplankton spatial variability detected by high frequency sampling in the NW Mediterranean. Role of density fronts
998
Surface peaks observed for medium energy He ions backscattered from amorphous solids
999
Surface Peierls transition on Cu(001) covered with heavier p-block metals
1000
Surface perception and the generic view principle
