ليست عنوان مقالات لاتين Microstructure and optical absorption property of the Cu/SiO2 nano-films Microstructure distribution and mechanical properties prediction of boron alloy during hot forming using FE simulation

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Microstructure and optical absorption property of the Cu/SiO2 nano-films

2

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

3

Microstructure and optical characterizations of mechanosynthesized nanocrystalline (Ti0.9Si0.1)N

4

Microstructure and optical limiting properties of multicomponent inorganic gel-glasses: A focus on SiO2, TiO2 and PbO gel-glasses

5

Microstructure and optical properties of (Pb,Ca)TiO3 films grown on Si(1 0 0) substrates by a simple sol–gel process

6

Microstructure and optical properties of Al2O3/ZrO2 nano multilayer thin films prepared by pulsed laser deposition

7

Microstructure and optical properties of amorphous and crystalline PbZrO3 thin films grown on Si(100) substrates by a sol–gel process

8

Microstructure and optical properties of CdI2 doped silver vanadate glass-nanocomposites

9

Microstructure and optical properties of electrodeposited Al-doped ZnO nanosheets

10

Microstructure and optical properties of GaAs/SiO2 nanogranular films prepared by magnetron co-sputtering

11

Microstructure and optical properties of GaN films on sapphire substrates

12

Microstructure and optical properties of lustre glazes produced on a copper body

13

Microstructure and optical properties of MgO films synthesized by closed-field unbalanced magnetron sputtering with additional electron emission

14

Microstructure and optical properties of nanocrystalline GaN embedded in silica matrix

15

Microstructure and optical properties of nanocrystalline ZnO and ZnO:(Li or Al) thin films

16

Microstructure and optical properties of nanostructured silicon thin films and artificial dielectrics

17

Microstructure and optical properties of phase-change Ge–Sb–Te nanoparticles grown by pulsed-laser ablation

18

Microstructure and optical properties of sodium caseinate films containing oleic acid–beeswax mixtures

19

Microstructure and optical properties of transparent alumina Original Research Article

20

Microstructure and optical properties of zinc nitride films deposited by magnetron sputtering method

21

Microstructure and optical properties of ZnO/porous silicon nanocomposite films

22

Microstructure and orientation variation during cell/dendrite transition in directional solidification of a single crystal nickel-base superalloy

23

Microstructure and origin of faults in siliceous mudstone at the Horonobe Underground Research Laboratory site, Japan

24

Microstructure and osteoblast response of gradient bioceramic coating on titanium alloy fabricated by laser cladding

25

Microstructure and oxidation behavior of Al and Hf co-deposition coatings on nickel-based superalloys

26

Microstructure and oxidation behavior of Al + Si co-deposited coatings on nickel-based superalloys

27

Microstructure and oxidation behavior of in situ formed TaSi2–Si3N4 nanocomposite coating grown on Ta substrate

28

Microstructure and Oxidation Behavior of Mechanically Alloyed Nb-Based Multi-Phase Superalloy Original Research Article

29

Microstructure and Oxidation Behavior of Modified Aluminide Coating on Ni3Al-based Single Crystal Superalloy

30

Microstructure and oxidation behavior of Nb-based multi-phase alloys

31

Microstructure and oxidation behavior of Nb–Mo–Si–B alloys

32

Microstructure and oxidation behavior of NiCoCrAl/YSZ microlaminates produced by EB–PVD

33

Microstructure and oxidation behavior of Ti–6Al–2Zr–1Mo–1V-based alloys with Sc addition

34

Microstructure and oxidation behavior of Ti–Si–B alloys

35

Microstructure and oxidation behavior of Ti–Si–B alloys

36

Microstructure and oxidation behaviour of chromium–molybdenum silicides

37

Microstructure and oxidation behaviour of chromium–molybdenum silicides

38

Microstructure and oxidation behaviour of Euro IV diesel engine soot: a comparative study with synthetic model soot substances

39

Microstructure and oxidation kinetics of intermetallic TiAl after Si- and Mo- ion implantation

40

Microstructure and oxidation of hot-dip aluminized titanium at high temperature

41

Microstructure and oxidation properties of 16Cr–5Al–ODS steel prepared by sol–gel and spark plasma sintering methods

42

Microstructure and oxidation property of NbSi2/Si3N4 nanocomposite coating formed on Nb substrate by nitridation process followed by pack siliconizing process

43

Microstructure and oxidation resistance of a plasma sprayed Mo–Si–B multiphase alloy coating

44

Microstructure and oxidation resistance of C-AlPO4–mullite coating prepared by hydrothermal electrophoretic deposition for SiCC/C composites

45

Microstructure and oxidation resistance of carbon/silicon carbide composites infiltrated with chromium silicide

46

Microstructure and oxidation resistance of carbon/silicon carbide composites infiltrated with chromium silicide

47

Microstructure and oxidation resistance of cryomilled NiCrAlY coating by laser induction hybrid rapid cladding

48

Microstructure and oxidation resistance of Mo–Si and Mo–Si–Al alloy coatings prepared by electro-thermal explosion ultrahigh speed spraying

49

Microstructure and oxidation resistance of nanocrystalline 304 SS-Al coatings

50

Microstructure and oxygen permeability of a La0.6Sr0.4Fe0.9Ga0.1O3−δ membrane containing magnesia as dispersed second phase particles

51

Microstructure and percolation threshold characteristics of reactive sputtered Au–TiO2 granular composite films

52

Microstructure and performance in diffusion-welded joints of Fe3Al/Q235 carbon steel

53

Microstructure and performance of a cermet material heat-treated in nitrogen Original Research Article

54

Microstructure and performance of crumb rubber modified asphalt

55

Microstructure and performance of CVD κ-Al2O3 multilayers

56

Microstructure and performance of CVD κ-Al2O3 multilayers

57

Microstructure and performance of electroformed Cu/nano-SiC composite

58

Microstructure and performance of energetically modified cement (EMC) with high filler content

59

Microstructure and performance of fly ash micro-beads in cementitious material system

60

Microstructure and performance of micro-tubular solid oxide fuel cells made by aqueous electrophoretic deposition

61

Microstructure and performance of novel Ni anode for hollow fibre solid oxide fuel cells

62

Microstructure and performance of sludge-ceramisite concrete

63

Microstructure and permittivity of sintered BaTiO3: influence of particle surface chemistry in an aqueous medium

64

Microstructure and phase composition dependent tribological properties of TiC/a-C nanocomposite thin films

65

Microstructure and phase composition of mechanically alloyed and hot pressed Ti-Al alloys

66

Microstructure and phase composition of microarc oxidation surface layers formed on aluminium and its alloys 2214-T6 and 7050-T74

67

Microstructure and phase composition of ZrO2–MgO structural ceramic after high-temperature deformation

68

Microstructure and phase constituents near the fusion zone of Fe3Al/Cr–Ni alloys joints produced by MAW

69

Microstructure and phase decomposition of quasi-crystal Zn60Mg30Y10 alloy

70

Microstructure and phase diagrams of polymer gels

71

Microstructure and phase equilibria in Ni–Al–Cr–Co alloys

72

Microstructure and phase equilibria in the Ni–Al–W system

73

Microstructure and phase evolution in laser rapid forming of a functionally graded Ti–Rene88DT alloy Original Research Article

74

Microstructure and phase evolution of alumina–spinel self-flowing refractory castables containing nano-alumina particles

75

Microstructure and phase morphology during thermochemical processing of α2-based titanium aluminide castings

76

Microstructure and phase morphology during thermochemical processing of α2-based titanium aluminide castings

77

Microstructure and phase morphology of wood derived biomorphous SiSiC-ceramics

78

MICROSTRUCTURE AND PHASE OF POLY(VINYLIDEN FLUORIDE) FILMS BY ELECTROPHORETIC DEPOSITION: EFFECT OF POLYMER DISPERSION STIRRING CONDITIONS

79

Microstructure and phase solubility extension in injection cast NiAl–28Cr–5.7Mo–0.3Hf alloy

80

Microstructure and phase stability in a Nb–Mo–Cr–Al–Si alloy

81

Microstructure and phase stability of TiAl–W ternary alloy

82

Microstructure and phase transformation behavior of doped nanostructured titania

83

Microstructure and phase transformation of WC/Ni60B laser cladding coatings during dry sliding wear

84

Microstructure and phase transformation of wear resistant ductile iron grinding balls by continuous cooling process

85

Microstructure and phase transformation of zirconia-based ternary oxides for thermal barrier coating applications

86

Microstructure and phase transformations in a Ni50Mn29Ga16Gd5 alloy with a high transformation temperature

87

Microstructure and phase transformations in the AlN–Al2O3 pseudo-binary system

88

Microstructure and photoactivity of titania nanoparticles prepared in nonionic W/O microemulsions

89

Microstructure and photoactivity of titania nanoparticles prepared in nonionic W/O microemulsions

90

Microstructure and photocatalytic activity of APS coatings obtained from different TIO2 nanopowders

91

Microstructure and photocatalytic activity of natural rutile from China for oxidation of methylene blue in water

92

Microstructure and photocatalytic activity of suspension plasma sprayed TiO2 coatings on steel and glass substrates

93

Microstructure and photocatalytic properties of nanostructured TiO2 and TiO2-Al coatings elaborated by HVOF spraying for the nitrogen oxides removal

94

Microstructure and photocatalytic properties of nanostructured TiO2 and TiO2–Al coatings elaborated by HVOF spraying for the nitrogen oxides removal

95

Microstructure and photocatalytic properties of WO3/TiO2 composite films by plasma electrolytic oxidation

96

Microstructure and photoluminescence properties of as-deposited and annealed Si-rich a-Si1−xCx:H films

97

Microstructure and photoluminescence properties of ZnO thin films grown by PLD on Si(1 1 1) substrates

98

Microstructure and photoluminescent properties of BaY2ZnO5:Tb3+ phosphors with addition of lithium carbonate

99

Microstructure and photoluminescent properties of Sr2SiO4:Eu3+ phosphors with various NH4Cl flux concentrations

100

Microstructure and photovoltaic properties of low temperature polycrystalline silicon solar cells fabricated by VHF-GD CVD using fluorinated gas

101

Microstructure and physical properties of arc ion plated TiAlN/Cu thin film

102

Microstructure and physical properties of laser Zn modified amorphous–nanocrystalline coating on a titanium alloy

103

Microstructure and physical properties of microbial cellulose produced during fermentation of black tea broth (Kombucha). II.

104

Microstructure and physical properties of sol gel derived SnO2:Sb thin films for optoelectronic applications

105

Microstructure and physical properties of some oxide eutectic composites processed by directional solidification Original Research Article

106

Microstructure and physico-chemical evaluation of nano-emulsion-based antimicrobial peptides embedded in bioactive packaging films

107

Microstructure and physicomechanical properties of pressureless sintered multiwalled carbon nanotube/alumina nanocomposites

108

Microstructure and piezoelectric properties of Bi0.5(Na0.82K0.18)0.5TiO3−NaSbO3 ceramics Original Research Article

109

Microstructure and piezoelectric properties of CuO added (K, Na, Li)NbO3 lead-free piezoelectric ceramics

110

Microstructure and piezoelectric properties of CuO-doped 0.95(K0.5Na0.5)NbO3–0.05Li(Nb0.5Sb0.5)O3 lead-free ceramics

111

Microstructure and piezoelectric properties of PMS–PZT ceramics

112

Microstructure and piezoelectric properties of textured (Na0.84K0.16)0.5Bi0.5TiO3 lead-free ceramics

113

Microstructure and pitting corrosion in simulated heat-affected zones of duplex stainless steels

114

Microstructure and plastic deformation behavior of Ni3(Ti,X) (X = Nb,Al) single crystals with long-period geometrically closely packed crystal structures

115

Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying

116

Microstructure and pore structure of concrete mixed with superfine phosphorous slag and superplasticizer

117

Microstructure and porosity evolution during experimental carbonation of a natural peridotite

118

Microstructure and porosity in thixomolded Mg alloys and minimizing adverse effects on formability

119

Microstructure and Precipitation Behavior in HAZ of V and Ti Microalloyed Steel Original Research Article

120

Microstructure and Precipitation Behavior in Heat Affected Zone of Nitrogen-Enhanced Microalloyed Steel Containing V and Ti Original Research Article

121

Microstructure and preferred orientation of Au–Sn alloy plated deposits

122

Microstructure and properties at elevated temperature of a nano-Al2O3 particles dispersion-strengthened copper base composite

123

Microstructure and properties characterisation of the double layered glass–ceramic coating on near-α titanium alloy

124

Microstructure and properties development of copper during severe plastic deformation

125

Microstructure and properties evaluation of TiO2 ceramics with multi-oxides glass additions

126

Microstructure and properties of (SiC, TiB2)/B4C composites by reaction hot pressing

127

Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06N super martensitic stainless steel

128

Microstructure and properties of 17-4PH steel plasma nitrocarburized with a carrier gas containing rare earth elements

129

Microstructure and properties of 3D needle-punched carbon/silicon carbide brake materials

130

Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding

131

Microstructure and properties of a creep-resistant, cast γ-titanium aluminide

132

Microstructure and properties of a creep-resistant, cast γ-titanium aluminide

133

Microstructure and properties of a Cu–Cr–Zr alloy

134

Microstructure and properties of a Cu–Ti–Co alloy

135

Microstructure and properties of a laser fabricated burn-resistant Ti alloy

136

Microstructure and properties of a low-carbon steel processed by equal-channel angular pressing

137

Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy

138

Microstructure and properties of a TiAl alloy prepared by mechanical milling and subsequent reactive sintering

139

Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing

140

Microstructure and properties of Ag/N dual ions implanted titanium

141

Microstructure and properties of Ag/SnO2 coatings prepared by cold spraying

142

Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys

143

Microstructure and Properties of Al0.5CoCrCuFeNiTix (x=0–2.0) High-Entropy Alloys

144

Microstructure and properties of Al2O3–TiC nanocomposites fabricated by spark plasma sintering from high-energy ball milled reactants

145

Microstructure and properties of AlB2-type WB2 thin films deposited by direct-current magnetron sputtering

146

Microstructure and properties of Al-based metal matrix composites reinforced by Al60Cu20Ti15Zr5 glassy particles by high pressure hot pressing consolidation

147

Microstructure and properties of AlCrFeCuNix (0.6 ≤ x ≤ 1.4) high-entropy alloys

148

Microstructure and properties of alendronate-loaded calcium phosphate cement

149

Microstructure and properties of an electroconductive SiC-based composite

150

Microstructure and properties of an oxide dispersion-strengthened iron aluminide

151

Microstructure and properties of an oxide dispersion-strengthened iron aluminide

152

Microstructure and properties of annealed IrO2 thin films prepared by pulsed laser deposition

153

Microstructure and properties of austenitic stainless steel reinforced with in situ TiC particulate

154

Microstructure and properties of borided 41Cr4 steel after laser surface modification with re-melting

155

Microstructure and properties of borocarburized 15CrNi6 steel after laser surface modification

156

Microstructure and properties of bulk Ta2AlC ceramic synthesized by an in situ reaction/hot pressing method

157

Microstructure and properties of CaO–ZrO2–SiO2 glass–ceramics prepared by sintering

158

Microstructure and properties of carbon nanotube/zirconia composite

159

Microstructure and properties of cement mortars containing organo-modified reservoir sludge

160

Microstructure and properties of ceramic particulate reinforced metallic glassy matrix composites fabricated by spark plasma sintering

161

Microstructure and properties of ceramics and composites joined by plastic deformation

162

Microstructure and properties of Cf/SiC composites with thin SiCN layer as fiber-protecting coating

163

Microstructure and properties of Co-, Ni-, Zn-, Nb- and W-modified multiferroic BiFeO3 ceramics

164

Microstructure and properties of coatings with rare earth formed by DC-plasma jet surface metallurgy

165

Microstructure and Properties of Colloidal Silica Bonded Magnesite Castable Refractories

166

Microstructure and properties of composite polyetheretherketone/Bioglass® coatings deposited on Ti–6Al–7Nb alloy for medical applications

167

Microstructure and properties of concrete using bottom ash and waste foundry sand as partial replacement of fine aggregates

168

Microstructure and properties of continuously cast, lead-alloy strip for lead/acid battery grids

169

Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting

170

Microstructure and properties of Cr3C2-modified nickel-based alloy coating deposited by plasma transferred arc process

171

Microstructure and properties of Cu–1.0Cr–0.2Zr–0.03Fe alloy

172

Microstructure and properties of Cu–Al–Fe high-temperature shape memory alloys

173

Microstructure and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of argon atomized powder preforms

174

Microstructure and properties of DC magnetron sputtered NiAl–Hf coatings

175

Microstructure and properties of diffusion bonded Ti–6Al–4V parts using brazing-assisted hot isostatic pressing

176

Microstructure and properties of duplex (Ti:N)-DLC/MAO coating on magnesium alloy

177

Microstructure and properties of ecoceramics/metal composites with interpenetrating networks

178

Microstructure and properties of electron beam welded joint of Ti–22Al–25Nb/TC11

179

Microstructure and properties of extruded rapidly solidified AlCr4.7Fe1.1Si0.3 (at.%) alloys

180

Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting

181

Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting

182

Microstructure and properties of Fe3Al–Fe3AlC0.5 composites prepared by self-propagating high temperature synthesis casting

183

Microstructure and properties of Fe–C–Cr–Cu coating deposited by plasma transferred arc process

184

Microstructure and properties of fine-grained orthorhombic transformed Ti-25Al-10Nb-3V-1Mo (Super α2) Ti aluminide

185

Microstructure and properties of fine-grained orthorhombic transformed Ti-25Al-10Nb-3V-1Mo (Super α2) Ti aluminide

186

Microstructure and properties of fly ash-based geopolymeric material with 5A zeolite as a filler

187

Microstructure and properties of friction stir butt-welded AE42 magnesium alloy

188

Microstructure and properties of friction stir butt-welded AZ31 magnesium alloy

189

Microstructure and properties of friction stir welded high strength Fe–36 wt%Ni alloy

190

Microstructure and properties of glycerol plasticized soy protein plastics containing castor oil Original Research Article

191

Microstructure and properties of hercynite–magnesia–calcium zirconate refractory mixtures

192

Microstructure and properties of HfC and TaC-based ceramics obtained by ultrafine powder

193

Microstructure and properties of high chrome steel roller after laser surface melting

194

Microstructure and properties of highly filled rubber/clay nanocomposites prepared by melt blending

195

Microstructure and properties of highly porous Y2SiO5 ceramics produced by a new water-based freeze casting

196

Microstructure and properties of hot extruded Cu–1 wt% Al2O3 nano-composites synthesized by various techniques

197

Microstructure and Properties of Hot Rolled Ti-23Al-17Nb Alloy Sheets Original Research Article

198

Microstructure and Properties of Hot Working Die Steel H13MOD Original Research Article

199

Microstructure and properties of HVOF-sprayed chromium alloyed WC–Co and WC–Ni coatings

200

Microstructure and properties of in situ generated MgAl2O4 spinel whisker reinforced aluminum matrix composites

201

Microstructure and properties of in situ nanometric Al2O3 reinforced α-Fe(Al)–Fe3Al-based composites

202

Microstructure and properties of indium tin oxide films produced by electrostatic spray assisted vapour deposition process

203

Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures

204

Microstructure and Properties of La0.7Sr0.3MnO3 Films Deposited on LaAlO3(100), (110), and (111) Substrates

205

Microstructure and properties of laser clad coatings studied by orientation imaging microscopy Original Research Article

206

Microstructure and properties of laser clad TiC+NiCrBSi+rare earth composite coatings

207

Microstructure and properties of laser clad Zr-based alloy coatings on Ti substrates

208

Microstructure and properties of laser treated arc sprayed and plasma sprayed coatings

209

Microstructure and properties of laser-borided Inconel 600-alloy

210

Microstructure and properties of laser-clad high-temperature wear-resistant alloys 1

211

Microstructure and properties of layers on chromium steel

212

Microstructure and properties of lead-free (Bi1/2Na1/2)TiO3 based piezoelectric ceramics doped with different cations

213

Microstructure and properties of low friction TiCC nanocomposite coatings deposited by magnetron sputtering

214

Microstructure and properties of low manganese and niobium containing HIC pipeline steel

215

Microstructure and properties of LZSA glass-ceramic foams

216

Microstructure and properties of magnesium AZ31B–aluminum 7075 explosively welded composite plate

217

Microstructure and properties of manganese dioxide films prepared by electrodeposition

218

Microstructure and Properties of Mg-10% Al-(0 ∼ 3%) Di Alloys

219

Microstructure and properties of Mg–3Sn–1Mn (wt%) alloy processed by a novel continuous shearing and rolling and heat treatment

220

Microstructure and properties of Mg–5.21Li–3.44Zn–0.32Y–0.01Zr alloy

221

Microstructure and properties of Mg–5.6%Sn–4.4%Zn–2.1%Al alloy

222

Microstructure and properties of Mg–Zn ferrite as a result of sintering temperature

223

Microstructure and Properties of Mo Microalloyed Cold Rolled DP1000 Steels Original Research Article

224

Microstructure and properties of monazite (LaPO4) coated saphikon fiber/alumina matrix composites

225

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

226

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

227

Microstructure and properties of MoSi2–MoB and MoSi2–Mo5Si3 molybdenum silicides

228

Microstructure and properties of nano-Al2O3 particle reinforced Ni–Cr–Mo–Cu composite alloying layer

229

Microstructure and properties of nanocrystalline copper–niobium alloy with high strength and high conductivity

230

Microstructure and properties of nanocrystalline Fe–Zr–Nb–B soft magnetic alloys with low magnetostriction Original Research Article

231

Microstructure and properties of nanocrystalline titanium monoxide films synthesized by inductively coupled plasma assisted reactive direct current magnetron sputtering

232

Microstructure and properties of nanostructured Cu28 wt%Ag microcomposite deformed after solidifying under a high magnetic field

233

Microstructure and properties of nickel prepared by electrolyte vacuum boiling electrodeposition

234

Microstructure and properties of Ni–Co/nano-Al2O3 composite coatings by pulse reversal current electrodeposition

235

Microstructure and properties of novel wear and corrosion resistant CrON/NbON nano-scale multilayer coatings

236

Microstructure and properties of organosoluble polyimide/silica hybrid films

237

Microstructure and properties of oxygen controlled melt textured NdBaCuO superconductive ceramics

238

Microstructure and properties of oxygen controlled melt textured NdBaCuO superconductive ceramics

239

Microstructure and properties of particle reinforced silicon carbide and silicon nitride ceramic matrix composites prepared by chemical vapor infiltration

240

Microstructure and properties of Pb(Mg1/3Nb2/3)O3–Portland cement composites

241

Microstructure and properties of Pb(Mg1/3Nb2/3)O3–Portland cement composites

242

Microstructure and properties of pipeline steel with a ferrite/martensite dual-phase microstructure

243

Microstructure and Properties of Plasma Spraying Boron Carbide Coating

244

Microstructure and properties of plasma-sprayed bio-coatings on a low-modulus titanium alloy from milled HA/Ti powders

245

Microstructure and properties of poly(vinyl alcohol-co-vinyl acetate)-g-ε-caprolactone

246

Microstructure and properties of polyamideimide/silica hybrids compatibilized with 3-aminopropyltriethoxysilane

247

Microstructure and properties of polyester-based polyurethane/titania hybrid films prepared by sol–gel process

248

Microstructure and properties of polyimide/poly(vinylsilsesquioxane) hybrid composite films

249

Microstructure and properties of polypropylene composites filled with co-incorporation of MCM-41(with template) and OMMT nanoparticles prepared by melt-compounding

250

Microstructure and properties of polypropylene composites filled with silver and carbon nanotube nanoparticles prepared by melt-compounding

251

Microstructure and properties of pore-created SiC ceramics with calcium chloride as pore former

252

Microstructure and properties of porous silicon carbide ceramics fabricated by carbothermal reduction and subsequent sintering process

253

Microstructure and properties of porous silicon nitride ceramics prepared by gel-casting and gas pressure sintering

254

Microstructure and properties of porous β-SiC templated from soft woods

255

Microstructure and properties of pure Ti processed by ECAP and cold extrusion

256

Microstructure and properties of pure Ti processed by ECAP and cold extrusion

257

Microstructure and properties of PZT53/47 thick films derived from sols with submicron-sized PZT particle

258

Microstructure and properties of recycled concretes using ceramic sanitary ware industry waste as coarse aggregate

259

Microstructure and properties of SA 106B carbon steel after treatment of the melt with nano-sized TiC particles

260

Microstructure and properties of self-reinforced α-sialon ceramics doped with Lu2O3

261

Microstructure and properties of Sip/Al–Si surface composites prepared by ultrasonic method

262

Microstructure and properties of Sm-substituted BiFeO3 ceramics

263

Microstructure and properties of solvent-resistant fluorine-contained thermoplastic vulcanizates prepared through dynamic vulcanization

264

Microstructure and properties of spark plasma sintered AlN ceramics

265

Microstructure and properties of spark plasma sintered Fe–Cr–Mo–Y–B–C bulk metallic glass

266

Microstructure and properties of spray formed Cr12MoV steel for rolls

267

Microstructure and Properties of Superplastic Welding between 40Cr and CrWMn Steels

268

Microstructure and properties of the compound layer obtained by pulsed plasma nitriding in steel gears

269

Microstructure and properties of the high-nitrogen Fe–Cr austenite

270

Microstructure and properties of the high-nitrogen Fe–Cr austenite

271

Microstructure and properties of the new Pt–Rh based alloys for high-temperature applications

272

Microstructure and properties of the sintered composites from zeolite 4A and magnesium oxide

273

Microstructure and properties of the Ti(C,N)–xMo2C–Ni cermet/steel joint by a novel diffusion bonding method

274

Microstructure and properties of the TiC/Fe-based alloy hardfacing layers

275

Microstructure and properties of thin wall by laser cladding forming

276

Microstructure and Properties of Ti and Ti+Nb Ultra-Low-Carbon Bake Hardened Steels Original Research Article

277

Microstructure and properties of Ti3AlC2 prepared by the solid–liquid reaction synthesis and simultaneous in-situ hot pressing process Original Research Article

278

Microstructure and properties of Ti3SiC2/SiC nanocomposites fabricated by spark plasma sintering

279

Microstructure and properties of Ti-48Al-2Cr after thermomechanical treatment

280

Microstructure and properties of Ti-48Al-2Cr after thermomechanical treatment

281

Microstructure and properties of TiB2-containing coatings prepared by arc spraying

282

Microstructure and properties of TiC–Fe cermet coatings by reactive flame spraying using asphalt as carbonaceous precursor

283

Microstructure and properties of TiC–Fe36Ni cermet coatings by reactive plasma spraying using sucrose as carbonaceous precursor

284

Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process

285

Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process

286

Microstructure and properties of titanium aluminides on Ti6Al4V titanium alloy produced by chemical vapor deposition method

287

Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming

288

Microstructure and properties of titanium boride dispersed Cu alloys fabricated by spray forming

289

Microstructure and properties of translucent Mg–sialon ceramics prepared by spark plasma sintering

290

Microstructure and properties of tungsten–samarium oxide composite prepared by a novel wet chemical method and spark plasma sintering

291

Microstructure and properties of ultrafine cemented carbides—Differences in spark plasma sintering and sinter-HIP

292

Microstructure and properties of ultra-fine grain Cu–Cr alloy prepared by equal-channel angular pressing

293

Microstructure and properties of ultra-fine TiC0.7N0.3 cermet

294

Microstructure and properties of ultrafine-grained and dispersion-strengthened titanium materials for implants

295

Microstructure and properties of various fluorine-containing SiAlON ceramics synthesized by HIPing

296

Microstructure and properties of WC–Co coatings, modified by sub-microcrystalline carbides, obtained by different methods of high velocity spray processes

297

Microstructure and properties of zirconia-based nanocomposites derived from a powder containing TiC crystallised in situ and carbon

298

Microstructure and properties of Zr65Al10Ni10Cu15 amorphous plates rolled in the supercooled liquid region

299

Microstructure and properties of Zr65Al10Ni10Cu15 amorphous plates rolled in the supercooled liquid region

300

Microstructure and properties of ZrB2–SiC composites prepared by spark plasma sintering using TaSi2 as sintering additive

301

Microstructure and properties stability of Al-alloyed MoSi2 matrix composites

302

Microstructure and property analysis of DC magnetron sputtered NiAl–0.6Hf coatings

303

Microstructure and property changes induced by substrate rotation in titanium/silicon dual-doped a-C:H films deposited by mid-frequency magnetron sputtering

304

Microstructure and property evaluation of barium aluminosilicate glass–ceramic sealant for anode-supported solid oxide fuel cell

305

Microstructure and property evolution during the sintering of stainless steel alloy with Si3N4

306

Microstructure and property investigation of paste boronized pure nickel and Nimonic 90 superalloy

307

Microstructure and property measurements on in situ TiB2/70Si–Al composite for electronic packaging applications

308

Microstructure and property modifications in a near α Ti alloy induced by pulsed electron beam surface treatment

309

Microstructure and property of a functionally graded aluminum silicon alloy fabricated by semi-solid backward extrusion process

310

Microstructure and property of Fe–Co–B–Si–C–Nb amorphous composite coating fabricated by laser cladding process

311

Microstructure and Property of HD Die Steel With Unsmoothed Surface With Various Laser Parameters Original Research Article

312

Microstructure and property of micro-plasma-sprayed Cu coating

313

Microstructure and property of micro-plasma-sprayed Cu coating

314

Microstructure and property of nitrogen-alloyed high manganese austenitic steel under high strain rate tension

315

Microstructure and property of SiC coating for carbon materials

316

Microstructure and property of the composite laminate cladded by explosive welding of CuAlMn shape memory alloy and QBe2 alloy

317

Microstructure and property relationships in hipped Stellite powders

318

Microstructure and property relationships in hipped Stellite powders

319

Microstructure and reaction mechanism of SiC ceramic with mullite-zircon as a new liquid-phase sintering additives system

320

Microstructure and reaction phases in Si3N4/Si3N4 joint brazed with Cu–Pd–Ti filler alloy

321

Microstructure and reactivity effects on the performance of Nd2NiO4+δ oxygen electrode on Ce0.9Gd0.1O1.95 electrolyte

322

Microstructure and reactivity of rich husk ash

323

Microstructure and refractory properties of spinel containing castables

324

Microstructure and relaxor ferroelectric properties of Bi2O3-doped strontium barium niobate ceramics

325

Microstructure and residual stress distribution of similar and dissimilar electron beam welds – Maraging steel to medium alloy medium carbon steel

326

Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling

327

Microstructure and residual stresses in surface layer of simultaneously laser alloyed and burnished steel

328

Microstructure and Resisting Thermal Shock Behaviors of TiC-Al2O3/Fe Functionally Graded Materials Prepared by SHS/PHIP

329

Microstructure and rheological behavior of grain refined and modified semi-solid A356 Al–Si slurries Original Research Article

330

Microstructure and rheological behavior of hypereutectic semi-solid Al–Si alloy under low shear rates compression test

331

Microstructure and rheological behaviour of alginate/pectin mixed gels

332

Microstructure and rheological behaviour of electrosterically stabilized silica particle suspensions

333

Microstructure and rheological properties of pH-responsive core–shell particles

334

Microstructure and rheological properties of psyllium polysaccharide gel

335

Microstructure and rheological properties of thermo-responsive poly(N-isopropylacrylamide) microgels

336

Microstructure and rheology of an AA2024 aluminium alloy in the semi-solid state, and mechanical properties of a back-extruded part

337

Microstructure and rheology of an acid-coagulated cheese (Karish) made with an exopolysaccharide-producing Streptococcus thermophilus strain and its exopolysaccharide non-producing genetic variant

338

Microstructure and rheology of phase-separated gels of gelatin + oxidized starch

339

Microstructure and rheology of stimuli-responsive microgel systems—effect of cross-linked density

340

Microstructure and rheology of β-lactoglobulin–galactomannan aqueous mixtures

341

Microstructure and rolling capability of modified AZ31–Ce–Gd alloys

342

Microstructure and room temperature deformation of Nbss/Nb5Si3 in situ composites alloyed with Mo

343

Microstructure and room temperature fracture toughness of directionally solidified NiAl–Mo eutectic in situ composites

344

Microstructure and room temperature fracture toughness of Nbss/Nb5Si3 in situ composites

345

Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling

346

Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling

347

Microstructure and room temperature hardening of ultra-fine-grained oxide-dispersion strengthened copper prepared by cryomilling

348

Microstructure and room temperature mechanical properties of mullite fibers after heat-treatment at elevated temperatures

349

Microstructure and room temperature strength of Fe-40Al containing nanocrystalline oxide particles Original Research Article

350

Microstructure and room-temperature fracture toughness of directionally solidified Nb–Si–Ti–Cr–Al–Hf alloy

351

Microstructure and room-temperature mechanical properties of Fe30Ni20Mn35Al15

352

Microstructure and room-temperature mechanical properties of β sialon/SiC nanocomposites

353

Microstructure and roughness of photopolymerized poly(ethylene glycol) diacrylate hydrogel as measured by atomic force microscopy in amplitude and frequency modulation mode

354

Microstructure and selected properties of hot-work tool steel with PVD coatings after laser surface treatment

355

Microstructure and self-sharpening of the magnetite cap in chiton tooth

356

Microstructure and self-solidification/stabilization (S/S) of heavy metals of nano-modified CFA–MSWIFA composite geopolymers

357

Microstructure and sensory properties of high pressure processed dressings stabilized by different whey proteins

358

Microstructure and shape memory behavior of annealed Ti–36.8 at.% Ni–11.6 at.% Cu thin film

359

Microstructure and shape memory behavior of Ti51.2(Pd27.0Ni21.8) and Ti49.5(Pd28.5Ni22.0) thin films

360

Microstructure and shape memory behavior of Ti51.2(Pd27.0Ni21.8) and Ti49.5(Pd28.5Ni22.0) thin films

361

Microstructure and shape memory effect of Ti–20Zr–10Nb alloy

362

Microstructure and shape memory properties of Fe–15Mn–5Si–9Cr–5Ni melt-spun ribbons

363

Microstructure and shape-memory characteristics of Ni56Mn25−xCoxGa19 (x = 4, 8) high-temperature shape-memory alloys

364

Microstructure and shear fracture characteristics of porous anodic TiO2 layer before and after hot water treatment

365

Microstructure and shear strength of a Au–In microjoint

366

Microstructure and shear strength of a Cu–Ta interface

367

Microstructure and shear strength of sintered Cu–Al2O3 composite joined to Cu using Ag–Cu and Cu–Zn filler alloys

368

Microstructure and silver nanoparticles in ion-exchanged and deformed soda-lime silicate glasses

369

Microstructure and size effects in Pt/C and Pt3Ni/C electrocatalysts synthesized in solutions based on binary organic solvents Original Research Article

370

Microstructure and sliding wear behavior of AA6360/(TiC + B4C) hybrid surface composite layer synthesized by friction stir processing on aluminum substrate

371

Microstructure and sliding wear behavior of nanostructured Ni60–TiB2 composite coating sprayed by HVOF technique

372

Microstructure and sliding wear behavior of pure titanium surface modified by double-glow plasma surface alloying with Nb

373

Microstructure and sliding wear behaviour of Tribaloy T-800 coatings deposited by laser cladding

374

Microstructure and sliding wear resistance of an Al–12 wt.% Si/TiC laser clad coating

375

Microstructure and solidification behavior of Cu–Ni–Si alloys

376

Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel

377

Microstructure and some dynamic performances of hydrogen storage electrode alloys

378

Microstructure and some magnetic properties of amorphous and nanocrystalline Fe–Cu–Nb–Si–B alloys

379

Microstructure and some magnetic properties of amorphous and nanocrystalline Fe–Cu–Nb–Si–B alloys

380

Microstructure and some magnetic properties of annealed Vitrovac® 6025X amorphous ribbons

381

Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting

382

Microstructure and sound absorption of snow

383

Microstructure and spin polarization of quaternary Co2Cr1−xVxAl, Co2V1−xFexAl and Co2Cr1−xFexAl Heusler alloys Original Research Article

384

Microstructure and Stability of Fe73.5Cu1Nb3Si13.5B9 Alloy at Different Stages of Phase Transformation

385

Microstructure and stability of medieval glass bracelets from Drastar Castle, Bulgaria (11th–13th cent. AD): Four case studies

386

Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining

387

Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining Original Research Article

388

Microstructure and strain distribution in freestanding Si membrane strained by SixNy deposition

389

Microstructure and strength of B2-ordered NiAl containing L21-Ni2AlHf precipitates

390

Microstructure and strength of B2-ordered NiAl containing L21-Ni2AlHf precipitates

391

Microstructure and strength of binary and tantalum alloyed two-phase Nbss/Nb3Al base alloys

392

Microstructure and strength of binary and tantalum alloyed two-phase Nbss/Nb3Al base alloys

393

Microstructure and strength of brazed joints of Ti3Al-base alloy with different filler metals

394

Microstructure and strength of brazed joints of Ti3Al-base alloy with NiCrSiB

395

Microstructure and strength of brazed joints of Ti3Al-base alloy with TiZrNiCu filler metal

396

Microstructure and strength of brazed joints of Ti3Al-base alloy with TiZrNiCu filler metal

397

Microstructure and strength of commercial purity aluminium (AA 1200) cold-rolled to large strains Original Research Article

398

Microstructure and strength of Cu–Fe–Ag in situ composites

399

Microstructure and strength of diffusion-bonded joints of TiAl base alloy to steel

400

Microstructure and strength of friction-welded Fe–28Al and 316 L stainless steel

401

Microstructure and strength of needle coke modified ceramic casting molds

402

Microstructure and strength of nickel at large strains Original Research Article

403

Microstructure and strength of pure Cu with large grains processed by equal channel angular pressing

404

Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application

405

Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application

406

Microstructure and strength of quasicrystal containing extruded Mg–Zn–Y alloys for elevated temperature application

407

Microstructure and strength of severely deformed fcc metals

408

Microstructure and strengthening mechanism of a thermomechanically treated Mg–10Gd–3Y–1Sn–0.5Zr alloy

409

Microstructure and strengthening mechanism of carbon nanotubes reinforced magnesium matrix composite

410

Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire Original Research Article

411

Microstructure and strengthening mechanisms in Cu/Fe multilayers Original Research Article

412

Microstructure and strengthening of metal matrix composites

413

Microstructure and strengthening of metal matrix composites

414

Microstructure and stress development in magnetron sputtered TiAlCr(N) films

415

Microstructure and stress rupture property of titanium-containing 11Cr ferritic/martensitic steels

416

Microstructure and stresses in a keatite solid–solution glass–ceramic

417

Microstructure and Stress-Rupture Life of Polycrystal, Directionally Solidified, and Single Crystal Castings of Nickel-Based IN 939 Superalloy

418

Microstructure and stress—strain responses of AlMgSi alloy matrix composites reinforced with 10 vol.% Al2O3 particulates

419

Microstructure and stress—strain responses of AlMgSi alloy matrix composites reinforced with 10 vol.% Al2O3 particulates

420

Microstructure and structural behavior of ion-nitrided AISI 8620 steel

421

Microstructure and structural fatigue of ultra-fine grained NiTi-stents

422

Microstructure and structure characteristics of cubic WNx compounds

423

Microstructure and structure characteristics of cubic WNx compounds

424

Microstructure and structure of NiO–SnO2 and Fe2O3–SnO2 systems

425

Microstructure and super high strength of cast Mg-8.5Gd-2.3Y-1.8Ag-0.4Zr alloy

426

Microstructure and superconductivity of MgB2 single crystals

427

Microstructure and superconductivity of V-based Laves-phase superconductor tape synthesized by a rapidly-heating/quenching process

428

Microstructure and superelasticity of in situ synthesized (TiB + La2O3)/Ti-alloy composites with different mass fraction of LaB6

429

Microstructure and superior mechanical properties of cast Mg–12Gd–2Y–0.5Sm–0.5Sb–0.5Zr alloy

430

Microstructure and superplastic behavior of TiO2-doped Al2O3–ZrO2 (3Y) composite ceramics

431

Microstructure and superplasticity of a Ti-25Al-10Nb-3V-1Mo intermetallic alloy

432

Microstructure and superplasticity of a Ti-25Al-10Nb-3V-1Mo intermetallic alloy

433

Microstructure and superplasticity of laser welded Ti–6Al–4V alloy

434

Microstructure and superplasticity of Mg–Al–Ca electromagnetic casting alloys after hot extrusion

435

Microstructure and superplasticity of TA15 alloy

436

Microstructure and surface characteristics of hydroxyapatite coating on titanium and Ti-30Nb-1Fe-1Hf alloy by anodic oxidation and hydrothermal treatment

437

Micro-structure and surface layer properties of 18CrNiMo7-6 steel after multistep shot peening

438

Microstructure and surface mechanical properties of electrodeposited Ni coating on Al 2014 alloy

439

Microstructure and surface mechanical properties of pulse electrodeposited nickel

440

Microstructure and surface morphology of YSZ thin films deposited by e-beam technique

441

Microstructure- and surface orientation-dependent mechanical behaviors of Ag nanowires under bending

442

Microstructure and surface plasmon absorption of sol-gel-prepared Au nanoclusters in TiO2 thin films

443

Microstructure and surface properties of chromium-doped diamond-like carbon thin films fabricated by high power pulsed magnetron sputtering

444

Microstructure and surface properties of laser-remelted titanium nitride coatings on titanium

445

Microstructure and surface properties of lignocellulosic-based activated carbons

446

Microstructure and surface wear resistance in rapidly quenched Fe–Cr–B alloy spray coatings

447

Microstructure and technological properties of porcelain stoneware tiles moulded at different pressures and thicknesses

448

Microstructure and temperature dependence of intergranular strains on diffractometric macroscopic residual stress analysis

449

Microstructure and temperature dependence of properties of morphotropic phase boundary Bi(Mg1/2Ti1/2)O3-PbTiO3 piezoceramics processed by conventional routes

450

Microstructure and temperature-dependent magnetic properties of Co/Pt multilayered nanowires

451

Microstructure and tensile behavior of a friction stir processed magnesium alloy Original Research Article

452

Microstructure and tensile behavior of Cu–Al multi-layered composites prepared by plasma activated sintering

453

Microstructure and tensile behavior of Fe–16Al-based alloy after severe plastic deformation

454

Microstructure and tensile behavior of multiply needled C/SiC composite fabricated by chemical vapor infiltration

455

Microstructure and tensile behavior of novel laminated Ti–TiBw/Ti composites by reaction hot pressing

456

Microstructure and tensile behavior of Sn–5Sb lead-free solder alloy containing Bi and Cu

457

Microstructure and tensile behaviour of cold-rolled TRIP-aided steels

458

Microstructure and tensile creep behavior of Mg–4Al based magnesium alloys with alkaline-earth elements Sr and Ca additions

459

Microstructure and tensile deformation of nanocrystalline Cu produced by pulse electrodeposition

460

Microstructure and tensile properties after thermohydrogen processing of Ti–6Al–4V

461

Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration

462

Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration

463

Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration

464

Microstructure and tensile properties of 45WCrV7 tool steel after deep cryogenic treatment

465

Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion

466

Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion

467

Microstructure and tensile properties of a commercial 5052 aluminum alloy processed by equal channel angular extrusion

468

Microstructure and tensile properties of a continuous-cast Al–Li–Hf alloy

469

Microstructure and tensile properties of Al–Mn alloy processed by accumulative roll bonding

470

Microstructure and tensile properties of as-cast and as-aged Mg–6Al–4Zn alloys with Sn addition

471

Microstructure and tensile properties of bulk nanostructured Al-5083/SiCp composites prepared by cryomilling

472

Microstructure and tensile properties of bulk nanostructured aluminum/graphene composites prepared via cryomilling

473

Microstructure and tensile properties of cast Al–15%Mg2Si composite: Effects of phosphorous addition and heat treatment

474

Microstructure and tensile properties of cast Ti-44Al-4Nb-4Hf-0.1Si-0.1B alloy with refined lamellar microstructures

475

Microstructure and tensile properties of consolidated magnesium chips

476

Microstructure and tensile properties of FeMnNiCuCoSnx high entropy alloys

477

Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy

478

Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6

479

Microstructure and tensile properties of high strength duplex ferrite–martensite (DFM) steels

480

Microstructure and tensile properties of high strength duplex ferrite–martensite (DFM) steels

481

Microstructure and tensile properties of high-strength high-ductility Ti-based amorphous matrix composites containing ductile dendrites Original Research Article

482

Microstructure and tensile properties of hot-rolled Zr50–Ti50 binary alloy

483

Microstructure and tensile properties of in situ (TiB+TiC)/Ti6242 (TiB:TiC=1:1) composites prepared by common casting technique

484

Microstructure and tensile properties of in situ (TiB+TiC)/Ti6242 (TiB:TiC=1:1) composites prepared by common casting technique

485

Microstructure and tensile properties of in situ synthesized (TiB+Y2O3)/Ti composites at elevated temperature

486

Microstructure and tensile properties of in situ synthesized (TiB+Y2O3)/Ti composites at elevated temperature

487

Microstructure and tensile properties of in situ synthesized (TiC + TiB + Nd2O3)/Ti-alloy composites at elevated temperature

488

Microstructure and tensile properties of in situ TiCp/Al–4.5 wt.% Cu composites obtained by direct reaction synthesis

489

Microstructure and tensile properties of Inconel 718 pulsed Nd-YAG laser welds

490

Microstructure and tensile properties of laser beam welded Ti–22Al–27Nb alloys

491

Microstructure and tensile properties of laser melting deposited Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy

492

Microstructure and Tensile properties of Laser Welded Joints between DP590 Steel and Plain Low Carbon Steel

493

Microstructure and tensile properties of mechanically alloyed Ti–6A1–4V with boron additions

494

Microstructure and tensile properties of mechanically alloyed Ti–6A1–4V with boron additions

495

Microstructure and tensile properties of micro-SiC particles reinforced magnesium matrix composites produced by semisolid stirring assisted ultrasonic vibration

496

Microstructure and tensile properties of nanostructured Cu-25wt%Ag Original Research Article

497

Microstructure and tensile properties of nickel-based superalloy K417G bonded using transient liquid-phase infiltration

498

Microstructure and tensile properties of orthorhombic Ti–Al–Nb–Ta alloys

499

Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V

500

Microstructure and tensile properties of Si3N4p/2024Al composite fabricated by pressure infiltration method

501

Microstructure and tensile properties of Sn–1Cu lead-free solder alloy produced by directional solidification

502

Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surface melting

503

Microstructure and tensile properties of thixoformed A356 alloy

504

Microstructure and tensile properties of Ti–6Al–4V–0.1B alloys of direct rolling in the near β phase region

505

Microstructure and tensile properties of Y2O3-dispersed titanium produced by arc melting

506

Microstructure and tensile properties of ZnO-coated magnesium borate whisker reinforced AZ31B composite

507

Microstructure and tensile property characterization of a nickel-containing zinc-based alloy: effects of heat treatment and test conditions

508

Microstructure and tensile property characterization of a nickel-containing zinc-based alloy: effects of heat treatment and test conditions

509

Microstructure and tensile strength of friction stir welded joints between interstitial free steel and commercially pure aluminium

510

Microstructure and textural properties of Kareish cheese manufactured by various ways

511

Microstructure and texture analysis of YBCO thick film with peritectic growth on unoriented silver substrate

512

Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles

513

Microstructure and texture development in hydrostatically extruded Mg–Al–Zn alloys during tensile testing at intermediate temperatures Original Research Article

514

Microstructure and texture development in Ti50Ni25Cu25 melt-spun ribbon Original Research Article

515

Microstructure and texture evolution after twin roll casting and subsequent cold rolling of Al–Mg–Mn aluminium alloys

516

Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086

517

Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure Original Research Article

518

Microstructure and texture evolution during cold rolling and annealing of a high Mn TWIP steel Original Research Article

519

Microstructure and texture evolution during cold rolling and annealing of Ni3Fe alloy

520

Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling

521

Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: Effects of die angle and processing route Original Research Article

522

Microstructure and texture evolution during hot rolling and subsequent annealing of Mg–1Gd alloy

523

Microstructure and texture evolution during solidification processing of Ti–6Al–4V

524

Microstructure and texture evolution during the drawing of tungsten wires

525

Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB)

526

Microstructure and texture evolution during β extrusion of boron modified Ti–6Al–4V alloy

527

Microstructure and texture evolution for dynamic plastic deformed pure magnesium during isothermal annealing

528

Microstructure and texture evolution in 21Mn–2.5Si–1.6Al–Ti steel subjected to dynamic impact loading

529

Microstructure and texture evolution in a twinning-induced-plasticity steel during uniaxial tension Original Research Article

530

Microstructure and texture evolution in dual-phase steels: Competition between recovery, recrystallization, and phase transformation

531

Microstructure and texture evolution in ECAE processed A5056

532

Microstructure and texture evolution in ECAE processed A5056

533

Microstructure and texture evolution in the tension of superplastic Al-6Cu-0.4Zr

534

Microstructure and texture evolution in the tension of superplastic Al–6Cu–0.4Zr Original Research Article

535

Microstructure and texture evolution of a near-α titanium alloy during hot deformation

536

Microstructure and texture evolution of bcc and fcc metals subjected to equal channel angular extrusion

537

Microstructure and texture evolution of commercial pure titanium deformed at elevated temperatures

538

Microstructure and texture evolution of copper processed by differential speed rolling with various speed asymmetry coefficient

539

Microstructure and texture evolution of Cu–Nb composite wires

540

Microstructure and texture evolution of Mg3Zn3Ce magnesium alloys sheets and associated restoration mechanisms during annealing

541

Microstructure and texture formation in extruded lead sulfide (galena)

542

Microstructure and texture gradient in copper deformed by equal channel angular pressing Original Research Article

543

Microstructure and texture of a lightly deformed TRIP-assisted steel characterized by means of the EBSD technique

544

Microstructure and texture of cementitious porous materials

545

Microstructure and texture of coarse-grained Mg–Gd–Y–Nd–Zr alloy after hot compression

546

Microstructure and texture of duplex stainless steel after melt-spinning processing

547

Microstructure and texture of EB-PVD TBCs grown under different rotation modes

548

Microstructure and texture of EB-PVD TBCs grown under different rotation modes

549

Microstructure and texture of hydrated cement-based materials: A proton field cycling relaxometry approach

550

Microstructure and texture of Nb + Ti stabilized ferritic stainless steel

551

Microstructure and texture of pitch-based ribbon fibers for thermal management Original Research Article

552

Microstructure and texture of rolled and annealed β titanium alloy Ti–10V–4.5Fe–1.5Al

553

Microstructure and texture of rolled and annealed β titanium alloy Ti–10V–4.5Fe–1.5Al

554

Microstructure and texture of twin-roll cast Mg–3Al–1Zn–0.2Mn magnesium alloy

555

Microstructure and texture studies on twin-roll cast AZ31 (Mg–3 wt.%Al–1 wt.%Zn) alloy and the effect of thermomechanical processing

556

Microstructure and the development of fatigue cracks at notches

557

Microstructure and the development of fatigue cracks at notches

558

Microstructure and the dielectric properties of SiCN–Si3N4 ceramics fabricated via LPCVD/CVI

559

Microstructure and the properties of FeCoCuNiSnx high entropy alloys

560

Microstructure and the wear mechanism of grain-refined aluminum during dry sliding against steel disc

561

Microstructure and thermal change of texture of calcite crystals in ostrich eggshell Struthio camelus

562

Microstructure and thermal conductivity of Mo–TiC cermets processed by hot isostatic pressing

563

Microstructure and thermal conductivity of porous ZrO2 ceramics Original Research Article

564

Microstructure and thermal conductivity of spark plasma sintering AlN ceramics

565

Microstructure and thermal conductivity of surfactant-free NiO nanostructures

566

Microstructure and thermal cycle resistance of plasma sprayed mullite coatings made from secondary mullitized natural andalusite powder

567

Microstructure and thermal cyclic performance of laser-glazed plasma-sprayed ceria–yttria-stabilized zirconia thermal barrier coatings

568

Microstructure and thermal cycling behavior of nanostructured yttria partially stabilized zirconia (YSZ) thermal barrier coatings

569

Microstructure and Thermal Diffusivity of Ceramic Powders

570

Microstructure and thermal expansion of Al2TiO5–MgTi2O5 solid solutions obtained by reaction sintering

571

Microstructure and thermal oxidation behavior of yttria-stabilized hafnia nanostructured coatings deposited on alumina

572

Microstructure and thermal properties of copper matrix composites reinforced by chromium-coated discontinuous graphite fibers

573

Microstructure and thermal properties of diamond/aluminum composites with TiC coating on diamond particles

574

Microstructure and thermal properties of dysprosium and thulium co-doped barium titanate ceramics for high performance multilayer ceramic capacitors

575

Microstructure and thermal properties of the GeS2–In2S3–CsI glassy system

576

Microstructure and thermal property of tungsten coatings prepared by vacuum plasma spraying technology

577

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

578

Microstructure and thermal shock property of liquid phase sintered Cf/SiC composites

579

Microstructure and thermal stabilities in various atmospheres of SiB0.5C1.5N0.5 nano-sized powders fabricated by mechanical alloying technique

580

Microstructure and thermal stability of Al/Ti0.5Al0.5N/Ti0.25Al0.75N/AlN solar selective coating

581

Microstructure and thermal stability of MoSi2–CoNiCrAlY nanocomposite feedstock prepared by high energy ball milling

582

Microstructure and thermal stability of nickel layers electrodeposited from an additive-free sulphamate-based electrolyte

583

Microstructure and thermal stability of ultra fine grained Mg-based alloys prepared by high-pressure torsion

584

Microstructure and thermal stability of superplastic aluminium—lithium alloy after severe plastic deformation

585

Microstructure and thermal/mechanical properties of short carbon fiber-reinforced natural graphite flake composites with mesophase pitch as the binder Original Research Article

586

Microstructure and thermo mechanical properties of a talc doped stoneware composition containing illitic clay

587

Microstructure and thermoelectric properties of CoSb2.75Ge0.25−xTex prepared by rapid solidification Original Research Article

588

Microstructure and thermoelectric properties of extruded n-type 95%Bi2Te2–5%Bi2Se3 alloy along bar length

589

Microstructure and thermoelectric properties of n-type 95%Bi2Te3–5%Bi2Se3 alloy produced by rapid solidification and hot extrusion

590

Microstructure and thermoelectric properties of p-type Fe0.9Mn0.1Si2 compounds prepared by pressureless sintering

591

Microstructure and thermoelectric properties of p-type Fe0.9Mn0.1Si2 compounds prepared by pressureless sintering

592

Microstructure and thermoelectric properties of SiGe-added higher manganese silicides

593

Microstructure and thermoelectric properties of Zn1−xAlxO ceramics fabricated by spark plasma sintering Original Research Article

594

Microstructure and thermo-electrical transport properties of Cd–Sn alloys

595

Microstructure and thermo-mechanical properties of pressureless infiltrated SiCp/Cu composites

596

Microstructure and thermophysical properties of B4C/graphite composites containing substitutional boron Original Research Article

597

Microstructure and thermophysical properties of graphite foam/glass composites Original Research Article

598

Microstructure and thermo-physical properties of yttria stabilized zirconia coatings with CMAS deposits

599

Microstructure and thermo-responsive behavior of poly(N-isopropylacrylamide) brushes grafted in nanopores of track-etched membranes

600

Microstructure and tool electrode erosion in EDMed of TiN/Si3N4 composites

601

Microstructure and tool electrode erosion in EDMed of TiN/Si3N4 composites

602

Microstructure and toughness of nitrogen-doped TiAl alloys

603

Microstructure and Transformation Characteristics of Acicular Ferrite in High Niobium-Bearing Microalloyed Steel Original Research Article

604

Microstructure and transformation of Al-containing nanostructured 316L stainless steel coatings processed using spark plasma sintering

605

Microstructure and transformation related behaviors of a Ni45.3Ti29.7Hf20Cu5 high temperature shape memory alloy

606

Microstructure and transformation temperature in alloys with a large magnetocrystalline anisotropy under external fields

607

Microstructure and transport behavior of grain boundaries in YBa2Cu3Oy: A comparison between thin films and bulk bicrystals

608

Microstructure and transport behavior of grain boundaries in YBa2Cu3Oy: A comparison between thin films and bulk bicrystals

609

Microstructure and transport current path in Ag-sheathed (Bi,Pb)2 Sr2Ca2Cu3Ox monofilamentary tapes rolled at different pressures

610

Microstructure and transport properties of [0 0 1]-tilt bicrystal grain boundaries in iron pnictide superconductor, cobalt-doped BaFe2As2

611

Microstructure and transport properties of Bi1.6Pb0.5Sr2−xLuxCa1.1Cu2.1O8+δ superconductor

612

Microstructure and transport properties of ceria and samaria doped ceria thin films prepared by EBE–IBAD

613

Microstructure and transport properties of wet poly-disperse particle assemblies

614

Microstructure and transport properties of Y-doped zirconia and Gd-doped ceria

615

Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy

616

Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy

617

Microstructure and tribological behavior of a peak aged Cu–Cr–Zr alloy

618

Microstructure and tribological behavior of amorphous and crystalline composite coatings using laser melting

619

Microstructure and tribological behavior of pulsed laser deposited a-CNx films

620

Microstructure and tribological behavior of spark plasma sintered iron-based amorphous coatings

621

Microstructure and tribological behavior of suspension plasma sprayed Al2O3 and Al2O3–YSZ composite coatings

622

Microstructure and tribological behaviors of C/C–BN composites fabricated by chemical vapor infiltration

623

Microstructure and tribological behaviors of Ti6Al4V alloy treated by plasma Ni alloying

624

Microstructure and tribological behaviour of liquid nitrocarburised tool steels

625

Microstructure and tribological behaviour of nano-structured metal matrix composite boride coatings synthesized by combined laser and sol–gel technology

626

Microstructure and tribological characteristics of aged Co–28Cr–5Mo–0.3C alloy

627

Microstructure and tribological characteristics of nitrided layer on 2Cr13 steel in air and vacuum

628

Microstructure and tribological characteristics of Ti–6Al–4V alloy against GCr15 under high speed and dry sliding

629

Microstructure and tribological characteristics of ZrO2–Y2O3 ceramic coatings deposited by laser-assisted plasma hybrid spraying

630

Microstructure and tribological characterization of magnetron sputtered MoS2 film deposited using nested structure material

631

Microstructure and tribological characterizations of Ni-based self-lubricating coating

632

Microstructure and tribological performance of an aluminium alloy based hybrid composite produced by friction stir processing

633

Microstructure and tribological performance of CNx–TiNx composite films prepared by pulsed laser deposition

634

Microstructure and tribological performance of self-lubricating diamond/tetrahedral amorphous carbon composite film

635

Microstructure and tribological performance of Ti–6Al–4V cladding with SiC powder

636

Microstructure and tribological properties of advanced carbon/silicon carbide aircraft brake materials

637

Microstructure and tribological properties of anodic oxide layer formed on Al–Si alloy produced by semisolid processing

638

Microstructure and tribological properties of complex nitrocarburized steel

639

Microstructure and tribological properties of CrN and CrSiCN coatings

640

Microstructure and tribological properties of Cu–Zn/TiN multilayers fabricated by dual magnetron sputtering

641

Microstructure and tribological properties of diamond-like carbon and TiAlSiCN nanocomposite coatings

642

Microstructure and tribological properties of Fe-Mo alloy-coated steel specimens prepared by low-pressure plasma spraying

643

Microstructure and tribological properties of in situ synthesized TiC, TiN, and SiC reinforced Ti3Al intermetallic matrix composite coatings on pure Ti by laser cladding

644

Microstructure and tribological properties of in situ synthesized TiN/Ti3Al intermetallic matrix composite coatings on titanium by laser cladding and laser nitriding

645

Microstructure and tribological properties of laser clad Ti2Ni3Si/NiTi intermetallic coatings Original Research Article

646

Microstructure and tribological properties of laser-clad Ni–Cr/TiB2 composite coatings on copper with the addition of CaF2

647

Microstructure and tribological properties of LaxCeyO1 − x − y composite nanofilms

648

Microstructure and tribological properties of low-pressure plasma-sprayed ZrO2–CaF2–Ag2O composite coating at elevated temperature

649

Microstructure and tribological properties of magnetron sputtered nc-TiC/a-C nanocomposite

650

Microstructure and tribological properties of plasma sprayed Al–Cu–Fe quasicrystalline coatings after laser post-treatment processing

651

Microstructure and tribological properties of plasma-sprayed chromium oxide–molybdenum oxide composite coatings

652

Microstructure and tribological properties of pulsed electric current sintered alumina–zirconia nanocomposites with different solid lubricants

653

Microstructure and tribological properties of reactive hot pressed TiN–TiB2 composites incorporated with or without MoSi2 from room temperature to 800 °C

654

Microstructure and tribological properties of SiOx/DLC films grown by PECVD

655

Microstructure and tribological properties of solution-treated Tribaloy alloy

656

Microstructure and tribological properties of stainless steel coatings sprayed by two methods based on spraying

657

Microstructure and tribological properties of the a-C:H films deposited by magnetron sputtering with CH4/Ar mixture

658

Microstructure and tribological properties of TiAg intermetallic compound coating

659

Microstructure and tribological properties of Ti–Cu intermetallic compound coating

660

Microstructure and tribological properties of TiCu2Al intermetallic compound coating

661

Microstructure and tribological properties of TiN, TiC and Ti(C, N) thin films prepared by closed-field unbalanced magnetron sputtering ion plating

662

Microstructure and tribological properties of WS2/MoS2 multilayer films

663

Microstructure and tribological properties of ZrO2(Y2O3) matrix composites doped with different solid lubricants from room temperature to 800 °C

664

Microstructure and tribological properties of electrodeposited Ni–Co alloy deposits

665

Microstructure and tribological property of HVOF-sprayed adaptive NiMoAl–Cr3C2–Ag composite coating from 20 °C to 800 °C

666

Microstructure and tribological property of nanocrystalline Co–W alloy coating produced by dual-pulse electrodeposition

667

Microstructure and tribology of TiC(Ag)/a-C:H nanocomposite coatings deposited by unbalanced magnetron sputtering

668

Microstructure and type IV cracking behavior of HAZ in P92 steel weldment

669

Microstructure and vacuum tribological properties of 1Cr18Ni9Ti steel with combined surface treatments

670

Microstructure and vacuum tribology of TiC–Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition

671

Microstructure and variable emittance property of annealed La-Sr-Mn-O films

672

Microstructure and varistor properties of Y2O3-doped ZnO–Pr6O11–CoO–Cr2O3–La2O3 ceramics

673

Microstructure and varistor properties of ZnO–V2O5–MnO2 ceramics with Ta2O5 addition Original Research Article

674

Microstructure and varistor properties of ZnO–V2O5–MnO2-based ceramics

675

Microstructure and Vickers hardness of Co/Cu multilayers fabricated by electrodeposition

676

Microstructure and visible-photoluminescence of titanium dioxide thin films fabricated by dual cathodic arc and nitrogen plasma deposition

677

Microstructure and water-lubricated friction and wear properties of CrN(C) coatings with different carbon contents

678

Microstructure and wear assessment of TIG surface alloying of CP-titanium with silicon

679

Microstructure and wear behavior of (Cr,Fe)7C3 reinforced composite coating produced by plasma transferred arc weld-surfacing process

680

Microstructure and wear behavior of a porous nanocrystalline nickel-free austenitic stainless steel developed by powder metallurgy

681

Microstructure and wear behavior of Al2024\SiFe and Al2024\SiFe\Al2O3 composites

682

Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys Original Research Article

683

Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrate

684

Microstructure and wear behavior of laser-textured and micro-alloyed Co-based WC and TiC composite sintered-carbide coating

685

Microstructure and wear behavior of spark plasma sintered Ti3SiC2 and Ti3SiC2–TiC composites

686

Microstructure and wear behavior of spray-formed and conventionally cast rolls of 18Cr–2.5Mo–Fe alloy

687

Microstructure and wear behavior of spray-formed and conventionally cast rolls of 18Cr–2.5Mo–Fe alloy

688

Microstructure and wear behavior of γ/Al4C3/TiC/CaF2 composite coating on γ-TiAl intermetallic alloy prepared by Nd:YAG laser cladding

689

Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coating

690

Microstructure and wear behaviors of WC–12%Co coating deposited on ductile iron by electric contact surface strengthening

691

Microstructure and wear behaviour of a vanadium carbide reinforced weld coating

692

Microstructure and wear behaviour of aluminium alloys containing embedded nanoscaled lead dispersoids Original Research Article

693

Microstructure and wear behaviours of laser-clad Cr13Ni5Si2-based metal-silicide coatings on a titanium alloy

694

MICROSTRUCTURE AND WEAR CHARACTERISTICS OF A HYPEREUTECTIC Al-Si ALLOY PRODUCED BY SPRAY DEPOSITION

695

MICROSTRUCTURE AND WEAR CHARACTERISTICS OF A HYPEREUTECTIC Al-Si ALLOY PRODUCED BY SPRAY DEPOSITION

696

Microstructure and wear characteristics of cobalt-based alloy deposited by plasma transferred arc weld surfacing

697

Microstructure and wear characteristics of high-carbon Cr-based alloy claddings formed by gas tungsten arc welding (GTAW)

698

Microstructure and wear characteristics of hypereutectic Fe–Cr–C cladding with various carbon contents

699

Microstructure and wear characteristics of rapidly solidified Al–Pb–Cu alloys

700

Microstructure and wear characteristics of rapidly solidified Al–Pb–Cu alloys

701

Microstructure and wear mechanisms in C/C composites

702

Microstructure and wear performance of arc-deposited Ti–N–O coatings on AISI 304 stainless steel

703

Microstructure and wear performance of gradient Ti/TiN metal matrix composite coating synthesized using a gas nitriding technology

704

Microstructure and wear performance of Ni–20 wt.% Pb hypomonotectic alloys

705

Microstructure and wear properties of AISI M2 tool steel on RF plasma nitriding at different N2–H2 gas compositions

706

Microstructure and wear properties of Al–Pb–Cu alloys prepared by mechanical alloying

707

Microstructure and wear properties of aluminum/aluminum–silicon composite coatings prepared by cold spraying

708

Microstructure and wear properties of Fe–15Cr–2.5Ti–2C–xB wt.% hardfacing alloys

709

Microstructure and wear properties of Fe-based hardfacing coating reinforced by TiC particles

710

Microstructure and wear properties of Fe–TiC surface composite coating by laser cladding

711

Microstructure and wear properties of Fe–VC–Cr7C3 composite coating on surface of cast steel

712

Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding

713

Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding

714

Microstructure and wear properties of laser clad Cuss/Cr5Si3 metal silicide composite coatings

715

Microstructure and wear properties of laser clad TiCo/Ti2Co intermetallic coatings on titanium alloy

716

Microstructure and wear properties of laser cladding Ti–Al–Fe–B coatings on AA2024 aluminum alloy

717

Microstructure and Wear Properties of Laser Coating Reinforced by Ti(CxN1-x on Adamite Roller Original Research Article

718

Microstructure and wear properties of laser deposited WC–12%Co composites

719

Microstructure and wear properties of laser surface-cladded Mo–WC MMC on AA6061 aluminum alloy

720

Microstructure and wear properties of laser-deposited functionally graded Inconel 690 reinforced with TiC

721

Microstructure and wear properties of the Fe–Ti–V–Mo–C hardfacing alloy

722

Microstructure and wear properties of the surface of 2205 duplex stainless steel reinforced with Al2O3 particles by the plasma transferred arc technique

723

Microstructure and wear properties of TiC/FeCrBSi surface composite coating prepared by laser cladding

724

Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc method

725

Microstructure and wear properties of WC–TiC–Co/CuZnNi composite surface coating

726

Microstructure and wear property of carbon nanotube carburizing carbon steel by laser surface remelting

727

Microstructure and wear property of Fe–Mn–Cr–Mo–V alloy cladding by submerged arc welding

728

Microstructure and wear property of laser-clad Co3Mo2Si/Coss wear resistant coatings

729

Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr–Cr3C2

730

Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating

731

Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating

732

Microstructure and wear resistance of a laser clad reinforced Cr3Si metal silicide composite coating

733

Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating

734

Microstructure and wear resistance of a laser clad TiC reinforced nickel aluminides matrix composite coating

735

Microstructure and wear resistance of Al–SiC composites coatings on ZE41 magnesium alloy

736

Microstructure and wear resistance of composite layers on a ductile iron with multicarbide by laser surface alloying

737

Microstructure and wear resistance of CVD TiN-coated and induction surface hardened steels

738

Microstructure and wear resistance of double-layer TiN/PSZ coatings from alkoxide solutions by H2O-containing thermal plasma CVD

739

Microstructure and wear resistance of laser clad cobalt-based alloy multi-layer coatings

740

Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy

741

Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy

742

Microstructure and wear resistance of laser clad Ti5Si3/NiTi2 intermetallic composite coating on titanium alloy

743

Microstructure and wear resistance of laser clad TiC reinforced FeAl intermetallic matrix composite coatings

744

Microstructure and wear resistance of laser-melted TiC reinforced nickel aluminide dual-phase matrix in situ composite

745

Microstructure and wear resistance of low carbon steel surface strengthened by plasma melt injection of SiC particles

746

Microstructure and wear resistance of low temperature hot pressed TiB2

747

Microstructure and wear resistance of nanostructured Al2O3–8wt.%TiO2 coatings plasma-sprayed with nanopowders

748

Microstructure and Wear Resistance of N-Doped TiO2 Coatings Grown on Stainless Steel by Plasma Surface Alloying Technology Original Research Article

749

Microstructure and wear resistance of NiCrBSi laser clad layer on titanium alloy substrate

750

Microstructure and wear resistance of oxide coatings on Ti–6Al–4V produced by plasma electrolytic oxidation in an inexpensive electrolyte

751

Microstructure and wear resistance of spray formed high chromium white cast iron

752

Microstructure and wear resistance of spray formed high chromium white cast iron

753

Microstructure and wear resistance of steel matrix composite coating reinforced by multiple ceramic particulates using SHS reaction of Al–TiO2–B2O3 system during plasma transferred arc overlay welding

754

Microstructure and wear resistance of TaC reinforced Ni-based coating by laser cladding

755

Microstructure and wear resistance of thermal sprayed steel coatings ion beam implanted with nitrogen

756

Microstructure and wear studies of laser clad Al-Si/SiC(p) composite coatings

757

Microstructure and wear-resistance of Fe–(Ti,V)C composite

758

Microstructure and X-ray analysis on LaCaMnO thin film

759

Microstructure and XRD analysis in the brazing zone of a new WC–TiC–Co hard alloy

760

Microstructure and XRD analysis in the interface zone of Mg/Al diffusion bonding

761

Microstructure and XRD analysis of brazing joint for duplex stainless steel using a Ni–Si–B filler metal

762

Microstructure and yield strength of ultrafine grained aluminum processed by hot isostatic pressing

763

Microstructure array on Si and SiOx generated by micro-contact printing, wet chemical etching and reactive ion etching

764

Microstructure associated with crack initiation during low-cycle fatigue in a low nitrogen duplex stainless steel

765

Microstructure at submicron scale of the white layer produced by EDM technique

766

Microstructure based and temperature dependent model of flow behavior of a polycrystalline nickel based superalloy

767

Microstructure based model for permeability predictions of open-cell metallic foams via homogenization

768

Microstructure based modeling for the mechanical behavior of ferrite–pearlite steels suitable to capture isotropic and kinematic hardening

769

Microstructure based modeling of β phase influence on mechanical response of cast AM series Mg alloys

770

Microstructure based prediction of strain hardening behavior of dual phase steels

771

Microstructure based three-dimensional finite element modeling of particulate reinforced metal–matrix composites

772

Microstructure based three-dimensional finite element modeling of particulate reinforced metal–matrix composites

773

Microstructure based three-dimensional finite element modeling of particulate reinforced metal–matrix composites

774

Microstructure based two-scale modelling of soft tissues Original Research Article

775

Microstructure behavior of Al–Mg–Sc alloy processed by ECAP at elevated temperature Original Research Article

776

Microstructure change and deuterium permeation behavior of erbium oxide coating

777

Microstructure change and deuterium permeation behavior of the yttrium oxide coating prepared by MOCVD

778

Microstructure change and helium release due to tensile loading on austenitic stainless steel implanted with low energy helium ions

779

Microstructure change and shape memory characteristics in welded Fe–28Mn–6Si–5Cr–0.53Nb–0.06C alloy

780

Microstructure change caused by (Cr,Fe)23C6 carbides in high chromium Fe–Cr–C hardfacing alloys

781

Microstructure change in Co46Al19O35 granular thin films by annealing

782

Microstructure changes and properties of TiC-coated carbon fiber-reinforced carbon composites

783

Microstructure Changes during Cavitation Erosion for a Steel with Metastable Austenite

784

Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy Original Research Article

785

Microstructure changes in mortars attacked by sulphates at 5 °C

786

Microstructure changes in nanoparticulate gold films under different thermal atmospheres and the effects on bondability Original Research Article

787

Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling: Part I. Mechanical model

788

Microstructure changes in the catalyst layers of PEM fuel cells induced by load cycling: Part II. Simulation and understanding

789

Microstructure changes induced by capillary condensation in catalyst layers of PEM fuel cells

790

Microstructure changes of on the extruded high-amylose bionanocomposites as affected by moisture content via synchrotron radiation studies

791

Microstructure changes of polyimide/MMT-AlN composite hybrid films under corona aging

792

Microstructure changes of polyurethane by inclusion of chemically modified carbon nanotubes at low filler contents

793

Microstructure changes of sodium carbonate-soluble pectin of peach by AFM during controlled atmosphere storage

794

Microstructure Changes of Steel Materials under Isothermal Heat Treatment in Salt Bath

795

Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel

796

Microstructure characterisation and stress analysis of the Ti48Al2Ag coating on the near-α titanium alloy

797

Microstructure characterisation of a low density steel by transmission electron microscopic study

798

Microstructure characterisation of irradiated Am-containing MgAl2O4 (EFTTRA-T4)

799

MICROSTRUCTURE CHARACTERISTIC OF ALUMINUM TITANATE SYNTHESIED BY BOTH SOLID- STATE AND SOL-GEL PROCESSES

800

Microstructure characteristic of ceramic coatings fabricated on magnesium alloys by micro-arc oxidation in alkaline silicate solutions

801

Microstructure Characteristic of In-situ Ti/TiC Composites

802

Microstructure characteristic, mechanical properties and sintering mechanism of nanocrystalline copper obtained by SPS process

803

Microstructure characteristics and a deformation mechanism of fine-grained tungsten heavy alloy under high strain rate compression

804

Microstructure characteristics and compressive properties of NiAl-based multiphase alloy during heat treatments

805

Microstructure characteristics and fatigue properties of welded HSLA with and without buffer layer

806

Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting

807

Microstructure characteristics and mechanical properties of cold metal transfer welding Mg/Al dissimilar metals

808

Microstructure characteristics and mechanical properties of laser weld bonding of magnesium alloy to aluminum alloy

809

Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process

810

Microstructure characteristics and temperature-dependent high cycle fatigue behavior of advanced 9% Cr/CrMoV dissimilarly welded joint

811

Microstructure characteristics during the multi-pass hot rolling and their effect on the mechanical properties of AM50 magnesium alloy sheet

812

Microstructure characteristics for anorthite composite glass with nucleating agents of TiO2 under non-isothermal crystallization

813

Microstructure characteristics of a rapidly solidified Al-Si-Ti-Pb alloy

814

Microstructure characteristics of Al2O3–13 wt.% TiO2 coating plasma spray deposited with nanocrystalline powders

815

Microstructure Characteristics of an Fe-Mn-C TWIP Steel After Deformation Original Research Article

816

Microstructure characteristics of blue-and-white porcelain from the folk kiln of Ming and Qing Dynasties

817

Microstructure characteristics of Cu–Mn alloys during laser surface remelting

818

Microstructure characteristics of Cu–Mn alloys during laser surface remelting

819

Microstructure characteristics of Cu–Mn alloys during laser surface remelting

820

Microstructure characteristics of FeMo–Sialon ceramic composite

821

Microstructure characteristics of laser–MIG hybrid welded mild steel

822

Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding

823

Microstructure Characteristics of Ni-Nb Near Eutectic Alloy during EBFZM Directional Solidification

824

Microstructure characteristics of silicon carbide coatings fabricated on C/C composites by plasma spraying technology

825

Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding

826

Microstructure characterization and cation distribution of nanocrystalline magnesium ferrite prepared by ball milling

827

Microstructure characterization and deposition mechanism studies of ZrO2 thin films deposited by LI-MOCVD

828

Microstructure characterization and dynamic recrystallization in an Alloy 800H

829

Microstructure characterization and dynamic recrystallization in an Alloy 800H

830

Microstructure characterization and electrical conductivity of electroless nano Ni coated 8YSZ cermets

831

Microstructure characterization and electrical transport of nanocrystalline ZrO2–CeO2 solid solution

832

Microstructure characterization and mechanical behaviors of a hot forged high Nb containing PM-TiAl alloy

833

Microstructure Characterization and Mechanical Properties of FGH 95 Turbine Blade Retainers Original Research Article

834

Microstructure characterization and mechanical properties of TiB2/TiAl in situ composite by induction skull melting process

835

Microstructure Characterization and Mechanical Properties of TiSi2-SiC-Ti3SiC2 Composites Prepared by Spark Plasma Sintering

836

Microstructure characterization and nanomechanics of cold-sprayed pure Al and Al-Al2O3 composite coatings

837

Microstructure characterization and NO2-sensing properties of porous silicon with intermediate pore size

838

Microstructure characterization and NO2-sensing properties of tungsten oxide nanostructures

839

Microstructure characterization and phase transformation kinetic study of ball-milled m-ZrO2–30 mol% a-TiO2 mixture by Rietveld method

840

Microstructure characterization and phase transformation kinetics of ball-mill prepared nanocrystalline Mg–Zn-ferrite by Rietveldʹs analysis and electron microscopy

841

Microstructure characterization and phase transformation kinetics of ball-milled prepared nanocrystalline Zn2TiO4 by Rietveld method

842

Microstructure characterization and phase transformation kinetics of polymorphic transformed ball milled a-TiO2–10 mol% m-ZrO2 mixture by Rietveld method

843

Microstructure characterization and photocatalytic activity of mesoporous TiO2 films with ultrafine anatase nanocrystallites

844

Microstructure characterization and polymorphic transformation kinetic study of ball-milled nanocrystalline a-TiO2–20 mol% m-ZrO2 mixture by X-ray diffraction and electron microscopy

845

Microstructure characterization and properties of chemically synthesized Co2Z hexaferrite

846

Microstructure characterization and thermal analysis of hybrid block copolymer α-methoxy-poly(ethylene glycol)-block-poly[ε-(benzyloxycarbonyl)-l-lysine] for biomedical applications

847

Microstructure characterization based on the type of deformed grains in cold-rolled, Cu-added, bake-hardenable steel

848

Microstructure characterization in cryomilled Al 5083

849

Microstructure characterization of 7050 aluminum alloy during dynamic recrystallization and dynamic recovery

850

Microstructure characterization of a cobalt-oxide-doped cerium-gadolinium-oxide by analytical and high-resolution TEM Original Research Article

851

Microstructure characterization of a food-grade U-type microemulsion system by differential scanning calorimetry and electrical conductivity techniques

852

Microstructure characterization of acetylenic polymers by Curie-point pyrolysis/capillary gas chromatography/mass spectrometry

853

Microstructure characterization of asphaltenes from atmospheric residue before and after hydroprocessing

854

Microstructure characterization of austenitic Fe–25Mn–22Cr–2Si–0.7N alloy processed by twin roll strip casting

855

Microstructure characterization of ball milled prepared nanocrystalline perovskite CaTiO3 by Rietveld method

856

Microstructure characterization of ball-mill-prepared nanocrystalline CaCu3Ti4O12 by Rietveld method

857

Microstructure characterization of bulk nanocrystalline Fe–0.8C alloy produced by mechanical milling and spark plasma sintering

858

Microstructure characterization of bulk nanocrystalline Fe–0.8C alloy produced by mechanical milling and spark plasma sintering

859

Microstructure characterization of Cu processed by compression with oscillatory torsion

860

Microstructure characterization of Cu-rich nanoprecipitates in a Fe–2.5 Cu–1.5 Mn–4.0 Ni–1.0 Al multicomponent ferritic alloy Original Research Article

861

Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions

862

Microstructure characterization of D-gun sprayed Fe–Al intermetallic coatings

863

Microstructure characterization of granular materials

864

Microstructure characterization of heat affected zone after welding in Mod.9Cr–1Mo steel

865

Microstructure characterization of high energy ball-milled nanocrystalline V2O5 by Rietveld analysis

866

Microstructure characterization of hot-pressed β-silicon nitride containing β-Si3N4 seeds

867

Microstructure characterization of in situ synthesized porous Si2N2O ceramics using spodumene additive

868

Microstructure characterization of in situ synthesized porous Si3N4–Si2N2O composites using feldspar additive

869

Microstructure characterization of InAs0.93Sb0.07 films grown by ramp-cooled liquid phase epitaxy

870

Microstructure characterization of laser welded Ti-6Al-4V fusion zones

871

Microstructure characterization of mechanically activated hematite using XRD line broadening

872

Microstructure characterization of mechanosynthesized nanocrystalline NiFe2O4 by Rietveldʹs analysis

873

Microstructure characterization of nanocrystalline TiC synthesized by mechanical alloying

874

Microstructure characterization of nanometer carbides heterogeneous precipitation in Ti–Nb and Ti–Nb–Mo steel

875

Microstructure characterization of oxidation of aluminized coating prepared by a combined process

876

Microstructure characterization of polyamide fibre/latex-filled plaster composites

877

Microstructure characterization of polymorphic transformed ball-milled anatase TiO2 by Rietveld method

878

Microstructure characterization of porous silicon as studied by positron annihilation measurements at low temperatures and high vacuum

879

Microstructure characterization of precursor-derived Si-C-N ceramics before and after creep testing Original Research Article

880

Microstructure characterization of SiCl4-based microcrystalline silicon films by effusion of implanted helium

881

Microstructure characterization of the NiAl intermetallic compound with Fe, Ga and Mo additions obtained by mechanical alloying

882

Microstructure characterization of the NiAl intermetallic compound with Fe, Ga and Mo additions obtained by mechanical alloying

883

Microstructure characterization of the non-modulated martensite in Ni–Mn–Ga alloy

884

Microstructure characterization of the stir zone of submerged friction stir processed aluminum alloy 2219

885

Microstructure characterization of thermal barrier coating systems after controlled exposure to a high temperature

886

Microstructure characterization of ZrB2–SiC composite fabricated by spark plasma sintering with TaSi2 additive

887

Microstructure characterization through mechanical, electrokinetic and spectroscopic methods of polyampholyte gelatin hydrogels crosslinked with poly(vinyl alcohol)

888

Microstructure consideration with plastic spin and multiple back-stresses for large strain problems in soils

889

Microstructure control and deuterium permeability of erbium oxide coating on ferritic/martensitic steels by metal-organic decomposition

890

Microstructure control and ductility improvement of La-Al-(Cu, Ni) composites by Bridgman solidification

891

Microstructure control and ductility improvement of La–Al–(Cu, Ni) composites by Bridgman solidification Original Research Article

892

Microstructure control and ductility improvement of the two-phase γ-Fe/κ-(Fe, Mn)3AlC alloys in the Fe–Mn–Al–C quaternary system

893

Microstructure control and ductility in Ni3Al polycrystals

894

Microstructure control and ductility in Ni3Al polycrystals

895

Microstructure control and mechanical properties of porous silicon nitride ceramics

896

Microstructure control and mechanical properties of Ti44Al6Nb1.0Cr2.0V alloy by cold crucible directional solidification

897

Microstructure control and tensile properties of three-phase alloys based on the E21 Co3AlC and B2 CoAl

898

Microstructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel

899

Microstructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel

900

Microstructure control and wear resistance of grain boundary allotriomorphic ferrite/granular bainite duplex steel

901

Microstructure control by thermomechanical processing in β-Ti–15–3 alloy

902

Microstructure control during severe plastic deformation of Al–Cu–Li and the influence on strength and ductility

903

Microstructure control for high strength 9Cr ferritic–martensitic steels

904

Microstructure control in the growth of large area Tl-2212 thin films

905

Microstructure control in two-phase (B2+L12) Ni–Al–Fe alloys by addition of carbon

906

Microstructure control in two-phase (B2+L12) Ni–Al–Fe alloys by addition of carbon

907

Microstructure control in two-phase Al–21Ti–23Cr alloy

908

Microstructure control of ceramic membrane support from corundum-rutile powder mixture

909

Microstructure control of continuously porous t-ZrO2 bodies fabricated by multi-pass extrusion process

910

Microstructure control of CrNx films during high power impulse magnetron sputtering

911

Microstructure control of Cu-base metallic glass powder composites by extrusion

912

Microstructure control of SOFC cathodes using the self-organizing behavior of LSM/ScSZ composite powder material prepared by spray pyrolysis

913

Microstructure control of TCP/TCP-(t-ZrO2)/t-ZrO2 composites for artificial cortical bone

914

Microstructure control of TiAl alloys containing β stabilizers by directional solidification

915

Microstructure control of TiAl alloys containing β stabilizers by directional solidification

916

Microstructure control of TiO2 nanotubular films for improved VOC sensing

917

Microstructure control of unidirectional growth of η-Cu6Sn5 in microbumps on 〈1 1 1〉 oriented and nanotwinned Cu Original Research Article

918

Microstructure control of very thin polycrystalline silicon layers on glass substrate by plasma enhanced CVD

919

Microstructure control on thermoelectric properties of Ca0.96Sm0.04MnO3 synthesised by co-precipitation technique

920

Microstructure control to improve mechanical properties of vanadium alloys for fusion applications

921

Microstructure controlled bending response in AA6016 Al alloys

922

Microstructure controlling by heat treatment and complex processing for Ti2AlNb based alloys

923

Microstructure controlling by heat treatment and complex processing for Ti2AlNb based alloys

924

Microstructure degradation of an anode/electrolyte interface in SOFC studied by transmission electron microscopy

925

Microstructure degradation of EB-PVD TBCs on Pd–Pt-modified aluminide coatings under cyclic oxidation conditions

926

Microstructure degradation of LSM-YSZ cathode in SOFCs operated at various conditions

927

Microstructure degradation of simple, Pt- and Pt + Pd-modified aluminide coatings on CMSX-4 superalloy under cyclic oxidation conditions

928

Microstructure degradation of YSZ in Ni/YSZ anodes of SOFC operated in phosphine-containing fuels

929

Microstructure dependence of a Cu–38Zn alloy on processing conditions of constrained groove pressing Original Research Article

930

Microstructure dependence of diffusional transport

931

Microstructure dependent erosion in Cr3C2–20(NiCr) coating deposited by a detonation gun

932

Microstructure dependent fatigue crack growth in aged hardened aluminium alloys

933

Microstructure dependent fatigue crack growth in Al–Mg–Sc alloy

934

Microstructure dependent hardness and fracture behavior in liquid-phase-sintered Al2O3

935

Microstructure dependent viscoplastic damage modelling of tin–lead solder

936

Microstructure design and dissolution behavior between 2024 Al/Sn with the ultrasonic-associated soldering

937

Microstructure design and mechanical properties of thermal barrier coatings with layered top and bond coats

938

Microstructure design by mechanical alloying

939

Microstructure design in mixed biopolymer composites

940

Microstructure design of lead-free piezoelectric ceramics

941

Micro-structure detection of a glossy granite surface machined by the grinding process

942

Microstructure determination of 2-hydroxy ethyl methacrylate and methyl acrylate copolymers by NMR spectroscopy

943

Microstructure determination of 9-ethyl-3-hydroxymethylcarbazolyl acrylate/methacrylonitrile using two-dimensional NMR spectroscopy

944

Microstructure determination of poly(acrylonitrile-co-methyl methacrylate-co-methyl acrylate) terpolymers by 2D HMBC

945

Microstructure developed in the surface layer of Ti-6Al-4V alloy after sliding wear in vacuum

946

Microstructure development and densification of ultrafine Y-TZP monoliths obtained by seeding-assisted chemical coprecipitation

947

Microstructure development and dielectric properties of hydrothermal BaTiO3 thin films

948

Microstructure development and hardening during high pressure torsion of commercially pure aluminium: Strain reversal experiments and a dislocation based model

949

Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloy

950

Microstructure development and helium behavior in nickel and vanadium base alloys

951

Microstructure development and mechanical properties of quenching and partitioning (Q&P) steel and an incorporation of hot-dipping galvanization during Q&P process

952

Microstructure development and metallurgical analysis of the Al–Si contact reaction

953

Microstructure development and nonlinear electrical characteristics of the SnO2·CuO·Ta2O5 based varistors

954

Microstructure development and phase evolution of alumina–mullite nanocomposite

955

Microstructure development and properties of alumina–Ti aluminide interpenetrating composites

956

Microstructure development and properties of alumina–Ti aluminide interpenetrating composites

957

Microstructure development and properties of novel Ba-doped phase Sialon ceramics

958

Microstructure development and properties of the AlCuFe quasicrystalline coating on near-α titanium alloy

959

Microstructure development and solute redistribution in aluminium alloys under low and moderate shear rates during rheo processing

960

Microstructure development and tensile mechanical properties of Mg–Zn–RE–Zr magnesium alloy

961

Microstructure development during dissimilar welding: Case of laser welding of Ti with Ni involving intermetallic phase formation

962

Microstructure development during equal-channel angular pressing of titanium Original Research Article

963

Microstructure development during isothermal brazing of Ni/BNi-2 couples

964

Microstructure development during NiAl intermetallic synthesis in reactive Ni–Al nanolayers: Numerical investigations vs. TEM observations

965

Microstructure development during sintering and heat-treatment of cemented carbides and cermets

966

Microstructure development in (LaxSr1−x)MnO3 ceramics

967

Microstructure development in a thermomechanically processed Ti15V3Cr3Sn3Al alloy

968

Microstructure development in a thermomechanically processed Ti15V3Cr3Sn3Al alloy

969

Microstructure development in alloy splats during rapid solidification

970

Microstructure development in alloy splats during rapid solidification

971

Microstructure development in alloy splats during rapid solidification

972

Microstructure development in calcium hexaluminate

973

Microstructure development in Cr–Al–Si–N nanocomposites deposited by cathodic arc evaporation

974

Microstructure development in electrospun carbon nanotube reinforced polyvinylidene fluoride fibers and its influence on tensile strength and dielectric permittivity

975

Microstructure development in electrospun carbon nanotube reinforced polyvinylidene fluoride fibers and its influence on tensile strength and dielectric permittivity

976

Microstructure development in gamma alloy mill products by thermomechanical processing

977

Microstructure development in gamma alloy mill products by thermomechanical processing

978

Microstructure development in hot deformed AA6082

979

Microstructure development in hot-pressed silicon carbide: effects of aluminum, boron, and carbon additives Original Research Article

980

Microstructure development in mechanically alloyed yttria dispersed austenitic steels Original Research Article

981

Microstructure development in Nb3Sn(Ti) internal tin superconducting wire

982

Microstructure development of Al2O3–13wt.%TiO2 plasma sprayed coatings derived from nanocrystalline powders Original Research Article

983

Microstructure development of alkali-activated fly ash cement: a descriptive model

984

Microstructure development of chars derived from high-temperature pyrolysis of barley (Hordeum vulgare L.) hulls

985

Microstructure development of creep resistant ferritic steel during creep

986

Microstructure development of creep resistant ferritic steel during creep

987

Microstructure development of creep resistant ferritic steel during creep

988

Microstructure development of different orientated nickel-base single crystal superalloy in directional solidification

989

Microstructure development of mesoporous silica thin films with pore channels aligned perpendicularly to electrode surfaces and application to proton conducting composite electrolyte membranes

990

Microstructure development of plasma-sprayed yttria-stabilized zirconia and its effect on electrical conductivity

991

Microstructure development of proton-conducting La-based metaphosphate during heat-treatment

992

Microstructure development of thermoplastic polyurethanes under compression: The influence from first-order structure to aggregation structure and a structural optimization

993

Microstructure development of unidirectionally solidified (Nb)/Nb3Si eutectic alloys

994

Microstructure development, hardness, toughness and creep behaviour of pressureless sintered alumina/SiC micro–nanocomposites obtained by slip-casting

995

Microstructure development, mechanical properties and formability of Mg–Zn–Y–Zr magnesium alloy

996

Microstructure devices for process intensification: Influence of manufacturing tolerances and design

997

Microstructure devices for water evaporation

998

Microstructure difference between core and skin of T700 carbon fibers in heat-treated carbon/carbon composites Original Research Article

999

Microstructure Diffusion Models with Secondary Flux

1000

Microstructure distribution and mechanical properties prediction of boron alloy during hot forming using FE simulation

بازگشت