<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Development of a solid-phase microextraction method for the determination of phthalic acid esters in water Original Research Article
2
Development of a solid-phase microextraction method for the determination of short-ethoxy-chain nonylphenols and their brominated analogs in raw and treated water
3
Development of a solid-phase microextraction method with micellar desorption for the determination of chlorophenols in water samples: Comparison with conventional solid-phase microextraction method
4
Development of a solid-phase microextraction–gas chromatography–tandem mass spectrometry method for the analysis of chlorinated toluenes in environmental waters
5
Development of a solid-state 100 mK refrigerator for user-supplied microelectronics
6
Development of a solid-state 100 mK refrigerator for user-supplied microelectronics
7
Development of a solid-state thick film calcium ion-selective electrode
8
Development of a solid-supported biotinylation reagent for efficient biotin labeling of SH groups on small molecules
9
Development of a solution method for the differential equations arising in the biosphere module of the BNFLʹs suite of codes MONDRIAN
10
Development of a solution model to correlate solubilities of inorganic compounds in water vapor under high temperatures and pressures
11
Development of a solvent extraction process for production of nuclear grade dysprosium oxide from a crude concentrate Original Research Article
12
Development of a solvent extraction system with 1,2-bis(2-methoxyethylthio)benzene for the selective separation of palladium(II) from secondary raw materials
13
Development of a solvent-free method for the simultaneous identification/quantification of drugs of abuse and their metabolites in environmental water by LC–MS/MS
14
Development of a sorbitol alkaline Cu–Sn plating bath and chemical, physical and morphological characterization of Cu–Sn films
15
Development of a sound-assisted fluidized bed filter/afterburner for particle-laden gas clean-up
16
Development of a Soundproof Device for 950 Watt rated Portable Generators
17
Development of a source emission model for atmospheric pollutants in the Barcelona area
18
Development of a source–drain electrode coated with an insulation layer for detecting concentration changes in a nitrate ion solution
19
Development of a source-to-outcome model for dietary exposures to insecticide residues: An example using chlorpyrifos
20
Development of a sous-vide packaging process for Korean seasoned beef
21
Development of a spatial data infrastructure for coastal management in the Amirante Islands, Seychelles
22
Development of a spatial Decision Support System (DSS) for the Spencer Gulf penaeid prawn fishery, South Australia
23
Development of a spatial decision support system for monitoring earthquake-induced landslides based on aerial photographs and the finite element method
24
Development of a spatial decision support system for post-emergency management of radioactively contaminated land
25
Development of a spatial knowledge base system for environment protection: the ARSEN project
26
Development of a spatial stochastic multimedia exposure model to assess population exposure at a regional scale Original Research Article
27
Development of a spatial terrestrial nitrogen model for application to Douglas-fir forest ecosystems
28
Development of a spatial terrestrial nitrogen model for application to Douglas-fir forest ecosystems
29
Development of a spatially explicit inventory of methane emissions from Australia and its verification using atmospheric concentration data
30
Development of a spatio-temporal disaggregation method (DisNDVI) for generating a time series of fine resolution NDVI images
31
Development of a SPE/HPLC/DAD method for the determination of antileishmanial 2-substituted quinolines and metabolites in rat plasma
32
Development of a Special Multi-Wavelength Pyrometer for Temperature Distribution Measurements in Rocket Engines
33
Development of a specialised finite element for the analysis of composite structures with ply drop-off
34
Development of a specialised finite element for the analysis of composite structures with ply drop-off
35
Development of a species specific fouling index using principal component analysis of fluorescence excitation–emission matrices for the ultrafiltration of natural water and drinking water production
36
Development of a species-specific and sensitive detection assay for Phytophthora infestans and its application for monitoring of inoculum in tubers and soil
37
Development of a specific and highly sensitive optical chemical sensor for determination of Hg(II) based on a new synthesized ionophore
38
Development of a specific assay using RISA for detection of the bacterial agent of ‘basses richesses’ syndrome of sugar beet and confirmation of a Pentastiridius sp. (Fulgoromopha, Cixiidae) as the economic vector
39
Development of a specific inhibitor for the placental protease, cathepsin P
40
Development of a specific real-time PCR assay targeting the poly-γ-glutamic acid synthesis gene, pgsB, for the quantification of Bacillus amyloliquefaciens in solid-state fermentation
41
Development of a specific TaqMan® real-time PCR assay for quantification of Fusarium graminearum clade 7 and comparison of fungal biomass determined by PCR with deoxynivalenol content in wheat and barley
42
Development of a Specification for Bridge Seismic Retrofit with Carbon Fiber Reinforced Polymer Composites
43
Development of a specimen holder for in situ generation of pure in-plane magnetic fields in a transmission electron microscope
44
Development of a specimen holder for in situ generation of pure in-plane magnetic fields in a transmission electron microscope
45
Development of a specimen holder for in situ generation of pure in-plane magnetic fields in a transmission electron microscope
46
Development of a spectral model based on charge transport for the Swift/BAT 32K CdZnTe detector array
47
Development of a spectral model based on charge transport for the Swift/BAT 32K CdZnTe detector array
48
Development of a spectrofluorimetry-based device for determining the acetylene content in the oils of power transformers
49
Development of a Spectrophotometric Method for Monitoring Angiotensin-Converting Enzyme in Dairy Products
50
Development of a spherical bearing with uni-directional carbon/epoxy composite
51
Development of a spherical reaction wheel actuator using electromagnetic induction
52
Development of a spiral-flow jet mill with improved classification performance
53
Development of a Spiritual Health Curriculum: An Applied Study in Iran
54
Development of a split-type tensile-strength tester and analysis of mechanism of increase of adhesion behavior of inorganic fine powder bed at high-temperature conditions
55
Development of a spontaneous immersion process for deposition of cerium oxide coatings on copper substrates
56
Development of a spring loaded micro-pivot bearing
57
Development of a sputter-deposited nanocarbon thin film electrode for use as a biosensor
58
Development of a square wave voltammetric method for dopamine determination using a biosensor based on multiwall carbon nanotubes paste and crude extract of Cucurbita pepo L.
59
Development of a stabilised Petrov–Galerkin formulation for conservation laws in Lagrangian fast solid dynamics
60
Development of a stability model for a vertical single band recirculated air curtain sealing a refrigerated cavity
61
Development of a stable cell line,overexpressing human T-cell immunoglobulin mucin 1
62
Development of a stable high-aluminum austenitic stainless steel for hydrogen applications
63
Development of a stable hydrogel network based on agar–kappa-carrageenan blend cross-linked with genipin
64
Development of a stack having an optimized flow field structure with low cross transport effects
65
Development of a stack simulation model for control study on direct reforming molten carbonate fuel cell power plant
66
Development of a stainless steel check valve for cryogenic applications Original Research Article
67
Development of a stakeholder-driven spatial modeling framework for strategic landscape planning using Bayesian networks across two urban-rural gradients in Maine, USA
68
Development of a stakeholder-driven spatial modeling framework for strategic landscape planning using Bayesian networks across two urban-rural gradients in Maine, USA
69
Development of a Stand-alone Solar Powered Bus Stop
70
Development of a Standard Infection Prevention and Control Preceptor Program
71
DEVELOPMENT OF A STANDARD METHOD - ANALYSIS OF COMPOUNDS CAUSING TASTES AND ODORS IN DRINKING WATER
72
DEVELOPMENT OF A STANDARD METHOD - ANALYSIS OF COMPOUNDS CAUSING TASTES AND ODORS IN DRINKING WATER
73
Development of a standard treatment protocol for severe acute respiratory syndrome
74
Development of a standardised human in vitro digestion protocol based on macronutrient digestion using response surface methodology
75
Development of a standardized boating sobriety test
76
Development of a standardized procedure for the characterization of interlaminar delamination propagation in advanced composites under fatigue mode I loading conditions
77
Development of a standardized training program for the Hamilton Depression Scale using internet-based technologies: results from a pilot study
78
Development of a Staphylococcus aureus vaccine against mastitis in dairy cows. II. Field trial
79
Development of a Staphylococcus aureus vaccine against mastitis in dairy cows. II. Field trial
80
Development of a Staphylococcus aureus vaccine against mastitis in dairy cows: I. Challenge trials
81
Development of a Staphylococcus aureus vaccine against mastitis in dairy cows: I. Challenge trials
82
Development of a statewide highway safety data warehouse: Massachusetts data warehouse and web-based access
83
Development of a Statewide Protocol for the Prehospital Identification of DNR Patients in Connecticut Including New DNR Regulations
84
Development of a static headspace gas chromatographic procedure for the routine analysis of volatile fatty acids in wastewaters
85
Development of a static headspace gas chromatographic/mass spectrometric method to analyze the level of volatile contaminants biodegradation
86
Development of a statistical and mathematical hybrid model to predict membrane fouling and performance Original Research Article
87
Development of a statistical parameter-based surface model for the simulation of variation of surface roughness with contact pressure
88
Development of a stepwise primary diagnosis method of a beam using a force identification and optimization approach
89
Development of a stereovision sensing system for 3D crop row structure mapping and tractor guidance
90
Development of a stiffness measurement accessory for ultrasound in breast cancer diagnosis
91
Development of a stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry method for determination of flavor compounds in grilled beef
92
Development of a stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry method for determining synthetic musks in water samples
93
Development of a stir bar sorptive extraction and thermal desorption–gas chromatography–mass spectrometry method for the simultaneous determination of several persistent organic pollutants in water samples
94
Development of a stir bar sorptive extraction method coupled to gas chromatography-mass spectrometry for the analysis of volatile compounds in Sherry brandy Original Research Article
95
Development of a stochastic detection efficiency calibration procedure for studying collimation effects on a broad energy germanium detector
96
Development of a stochastic detection efficiency calibration procedure for studying collimation effects on a broad energy germanium detector
97
Development of a stochastic dynamic model for ecological indicators’ prediction in changed Mediterranean agroecosystems of north-eastern Portugal
98
Development of a stochastic individual path (SIP) model for predicting the tracheobronchial deposition of pharmaceutical aerosols: Effects of transient inhalation and sampling the airways
99
Development of a stochastic model for the efficacy of NRTIs using known mechanisms of action
100
Development of a stochastic simulation–optimization model for planning electric power systems – A case study of Shanghai, China
101
Development of a Stokes flow solver robust to large viscosity jumps using a Schur complement approach with mixed precision arithmetic
102
Development of a strain-smoothed three-node triangular flat shell element with drilling degrees of freedom
103
Development of a Strategic Plan of the Handball Federation of Iran
104
Development of a strategic plan through SWOT analysis to control trafficborne air pollutants using CALINE4 model
105
Development of a strategy and process parameters for a green process in counter-current chromatography: Purification of tanshinone IIA and cryptotanshinone from Salvia miltiorrhiza Bunge as a case study
106
Development of a strategy for the foaming of polystyrene dissolutions in scCO2
107
Development of a strategy for the management of PBMR spent fuel in South Africa Original Research Article
108
Development of a straw tube chamber with pickup-pad readout
109
Development of a straw tube chamber with pickup-pad readout
110
Development of a stream–aquifer numerical flow model to assess river water management under water scarcity in a Mediterranean basin Original Research Article
111
Development of a stress scale for pregnant women in the South Asian context: the A-Z Stress Scale
112
DEVELOPMENT OF A STRICT FEEDBACK TWO-MASS HORIZONTAL AXIS WIND TURBINE MODEL WITH EMPIRICAL POWER COEFFICIENT AND EXTERNAL STIFFNESS
113
Development of a strontium-containing hydroxyapatite bone cement
114
Development of a Structural Model of Risk Issues Involved in E-Supply Chain Adoption in Indian Mechanical Industries
115
Development of a structurally dynamic model for ecosystem health prognosis of Baiyangdian Lake, China
116
Development of a structurally dynamic model for forecasting the effects of restoration of Lake Fure, Denmark
117
Development of a structurally dynamic model for forecasting the effects of restoration of Lake Fure, Denmark
118
Development of a structure-based model for the competitive growth of Listeria innocua in minced chicken breasts
119
Development of a subchannel void sensor and two-phase flow measurement in 10 × 10 rod bundle
120
Development of a subcritical fluid extraction and GC–MS validation method for polychlorinated biphenyls (PCBs) in marine samples
121
Development of a subglacial drainage system and its effect on glacitectonism within the polydeformed Middle Pleistocene (Anglian) glacigenic sequence of north Norfolk, Eastern England
122
Development of a subject search filter to find information relevant to palliative care in the general medical literature
123
Development of a sub-lethal pollution bioassay using the estuarine amphipod Gammarus duebeni
124
Development of a submerged membrane fungi reactor for textile wastewater treatment Original Research Article
125
Development of a submerged-liquid sporulation medium for the potential smartweed bioherbicide Septoria polygonorum
126
Development of a submersible small fiber LDV probe and its application to flows in a 4 × 4 rod bundle
127
Development of a sub-picoampere scanning tunneling microscope for oxide surfaces
128
Development of a substitutive light source for indoor daylight calculations
129
Development of a suction-pump-assisted thermal and electrical hybrid adsorption heat pump
130
Development of a sugar cane residue feeding system for a cyclone gasifier
131
Development of a sugarcane leaf gasifier for electricity generation
132
Development of a suicidal DNA vaccine for infectious hematopoietic necrosis virus (IHNV)
133
Development of a Suitable Culture Medium for the Production of Tubificid Worms
134
Development of a suitable model for characterizing photovoltaic arrays with shaded solar cells
135
DEVELOPMENT OF A SUITABLE PLANTER FOR HYBRID RICE CROP
136
Development of a super B-factory monolithic active pixel detector—the Continuous Acquisition Pixel (CAP) prototypes
137
Development of a super B-factory monolithic active pixel detector—the Continuous Acquisition Pixel (CAP) prototypes
138
Development of a super ductile diecast Al–Mg–Si alloy
139
Development of a Superabrasive Grinding Wheel With Defined Grain Structure Using Kinematic Simulation
140
Development of a super-conducting levitated coil system in the RT-1 magnetospheric confinement device
141
Development of a superconducting radio frequency photoelectron injector
142
Development of a superconducting radio frequency photoelectron injector
143
Development of a superconducting transformer using self-resonant techniques for DC/DC power conversion
144
Development of a superconducting transverse holding magnet for the HIγS frozen spin target
145
Development of a superconducting transverse holding magnet for the HIγS frozen spin target
146
Development of a superconducting X-ray microcalorimeter with a titanium/gold thin film as a thermometer
147
Development of a superconducting X-ray microcalorimeter with a titanium/gold thin film as a thermometer
148
Development of a superconducting-phase-transition thermometer (SPT) for the application in a time-of-flight mass spectrometer (TOF-MS) for heavy-mass molecules
149
Development of a superconducting-phase-transition thermometer (SPT) for the application in a time-of-flight mass spectrometer (TOF-MS) for heavy-mass molecules
150
Development of a supercritical fluid chromatography high-resolution separation method suitable for pharmaceuticals using cyanopropyl silica
151
Development of a supercritical fluid chromatography–tandem mass spectrometry method for the determination of lacidipine in beagle dog plasma and its application to a bioavailability study
152
Development of a super-fluid 4He target system for an experimental search for nuclear states
153
Development of a super-fluid 4He target system for an experimental search for nuclear states
154
Development of a superlattice (Ti,Hf,Cr)N coating for cold metal forming applications
155
Development of a superoxide sensor by immobilization of superoxide dismutase
156
Development of a support for a NiO catalyst for selective adsorption and post-adsorption catalytic steam gasification of thermally converted asphaltenes
157
Development of a support skill scale in insulin therapy: A nationwide study in Japan
158
Development of a Support System for Parents of Premature Infants
159
Development of a supported liquid membrane process for separating enantiomers of N-protected amino acid derivatives
160
Development of a supported tri-metallic catalyst and evaluation of the catalytic activity in biomass steam gasification
161
Development of a surface plasmon resonance-based assay for the detection of Corynebacterium pseudotuberculosis infection in sheep Original Research Article
162
Development of a surface profiler for optical elements
163
Development of a surface profiler for optical elements
164
Development of a surface roughness measurement system using reflected laser beam
165
Development of a surface roughness model in end milling of nHAP using PCD insert
166
Development of a sustainability policy model for promoting cleaner production: a knowledge integration approach
167
Development of a sustainability reporting scheme for biofuels: A UK case study
168
Development of a sustainable balanced scorecard framework
169
Development of a sustainable tourism hospitality human resources management module: a template for teaching sustainability across the curriculum
170
Development of a sustainable, green, and solar-powered filtration system for E. coli removal and greywater treatment
171
Development of a switchable multidimensional/comprehensive two-dimensional gas chromatographic analytical system
172
Development of a SYBR green based real-time polymerase chain reaction assay for specific detection and quantification of Vibrio parahaemolyticus from food and environmental samples
173
Development of a symmetrical spiral inlet to improve cyclone separator performance
174
DEVELOPMENT OF A SYMPLECTIC SCHEME WITH OPTIMIZED NUMERICAL DISPERSION-RELATION EQUATION TO SOLVE MAXWELLʹS EQUATIONS IN DISPERSIVE MEDIA
175
Development of a synovial fluid analogue with bio-relevant rheology for wear testing of orthopaedic implants
176
Development of a synthesis method of beryllides as advanced neutron multiplier for DEMO reactors
177
Development of a synthetic diamond radiation detector with a boron doped CVD diamond contact
178
Development of a synthetic diamond radiation detector with a boron doped CVD diamond contact
179
Development of a synthetic phantom for the selection of optimal scanning parameters in CAD–CT colonography
180
Development of a synthetic record of fire probability and proportion of late fires from simulated growth of ground stratum and annual rainfall in the Australian tropical savanna zone
181
Development of a Synthetic Sediment Graph Using Hydrological D
182
Development of a syringe pump assisted dynamic headspace sampling technique for needle trap device
183
Development of a system by atomization for the formation of polymeric particles in micro and sub-micro scales
184
Development of a System Dynamics Model for Prediction of Karaj Reservoir Share in Tehran Water Supply
185
Development of a system for automatic measurements of force and visual stance variables for objective lameness detection in sows: SowSIS
186
Development of a System for Directed Evolution of Arabidopsis Formate Dehydrogenase to Utilize NADP as a Cofactor
187
Development of a System for Directed Evolution of Arabidopsis Formate Dehydrogenase to Utilize NADP as a Cofactor
188
Development of a system for measuring calcitonin in the stingray Dasyatis akajei (a cartilaginous fish): the possible involvement of stingray calcitonin in gonadal development
189
Development of a system for measuring the complex impedance of borosilicate glasses at high pressures and temperatures: Application to the study of Li- and Na-doped borosilicate glasses Original Research Article
190
Development of a system for neutron radiography and tomography
191
Development of a system for neutron radiography and tomography
192
Development of a system for predicting snow distribution in built-up environments: Combining a mesoscale meteorological model and a CFD model
193
Development of a system for the continuous monitoring of odours from a composting plant: Focus on training, data processing and results validation methods
194
Development of a system for the in-situ characterisation of thoroughbred horse racing track surfaces
195
Development of a system model for a hydrogen production process on a solar tower
196
Development of a system of indicators for sustainable port management
197
Development of a system to measure hygroscopic growth of aerosol particles at relative humidities greater than 90%
198
Development of a system to produce maps of agricultural profit on a continental scale: An example for Australia
199
Development of a system to quantify muscle fibre destructuration
200
Development of a system to rapidly measure sampler penetration up to 20 μm aerodynamic diameter in calm air, using the aerodynamic particle sizer
201
Development of a Systematic Approach to Project Selection for Rural Economic Development
202
Development of a systematic classification scheme of marine habitats to facilitate regional management and mapping of Caribbean coral reefs Original Research Article
203
Development of a systematic method for intelligent compaction data analysis and management
204
Development of a systematic methodology of fuzzy logic modeling
205
Development of a tagged neutron facility at intermediate energies
206
Development of a tagged neutron facility at intermediate energies
207
Development of a tagged neutron facility for neutron scattering experiments at intermediate energies Original Research Article
208
Development of a tailored, telehealth intervention to address chronic pain and heavy drinking among people with HIV infection: integrating perspectives of patients in HIV care
209
Development of a Taiwanese computerized database for psychiatric consultation in a general hospital
210
Development of a tandem cyclization mediated by samarium(II) iodide: sequential intramolecular conjugate addition/nucleophilic acyl substitution
211
Development of a tandem thin-layer chromatography–high-performance liquid chromatography method for the identification and determination of corticosteroids in cosmetic products Original Research Article
212
Development of a tank bioleaching process for the treatment of complex Cu-polymetallic concentrates
213
Development of a tannase biocatalyst based on bio-imprinting for the production of propyl gallate by transesterification in organic media
214
Development of a tape casting process for making thin layers of Si3N4 and Si3N4 + TiN
215
Development of a targeted method for twenty-three metabolites related to polyphenol gut microbial metabolism in biological samples, using SPE and UHPLC–ESI-MS/MS
216
Development of a Tc-99m labeled sigma-2 receptor-specific ligand as a potential breast tumor imaging agent
217
Development of a technical scale PERMCAT reactor for processing of highly tritiated water
218
Development of a technique based on multi-spectral imaging for monitoring the conservation of cultural heritage objects Original Research Article
219
Development of a technique for on-line detection of shorts in field windings of turbine-generator rotors: circuit design and testing
220
Development of a technique for the measurement of the radon exhalation rate using an activated charcoal collector
221
Development of a technique for using 99mTc as an adsorbable tracer for hydrodynamic studies of fine sediments in suspension
222
Development of a technique to determine adequate sample size using subsampling and return interval estimation
223
Development of a technique to measure the residual strength of woodworm infested timber
224
Development of a technique to prepare porous materials from glasses
225
Development of a technique to prevent radiation damage of chromate conversion coatings during X-ray photoelectron spectroscopic analysis
226
Development of a technique using MCNPX code for determination of nitrogen content of explosive materials using prompt gamma neutron activation analysis method
227
Development of a technique using MCNPX code for determination of nitrogen content of explosive materials using prompt gamma neutron activation analysis method
228
Development of a technology for commercial phytoextraction of nickel: economic and technical considerations
229
Development of a technology of silicon production by recycling phosphorous industry wastes
230
Development of a temperature control model used in HVAC systems in school spaces in Mediterranean climate
231
Development of a temperature sensitive drug release system for polymeric implant devices
232
Development of a temperature-controlled car-seat system utilizing thermoelectric device
233
Development of a temperature-responsive agarose-based ion-exchange chromatographic resin
234
Development of a tensiometric model for surface energy characterization of raw coffee beans Original Research Article
235
Development of a terbium-lithium glass for slow neutron detection
236
Development of a termination for the 77 kV-class high Tc superconducting power cable
237
Development of a terrestrial vertebrate model for assessing bioavailability of cadmium in the fence lizard (Sceloporus undulatus) and in ovo effects on hatchling size and thyroid function
238
Development of a tertiary motion generator for elliptical vibration texturing
239
Development of a test facility for photovoltaic-diesel hybrid energy systems
240
Development of a test for the analysis of the harmfulness of a 3D thermal fatigue loading in tubes
241
Development of a test method for Chironomus riparius using a formulated sediment
242
Development of a test method for the rheological characterization of polymers under the injection molding process conditions
243
Development of a test method to assess the sludge reduction potential of aquatic organisms in activated sludge
244
Development of a testing method for control HVAC systems by emulation
245
Development of a test-rig for a modern motorcycle engine
246
Development of a tetramethylrhodamine-labeled probe for a capillary electrophoresis-based competitive immunoassay of staphylococcal enterotoxin B Original Research Article
247
Development of a textile-optoelectronic pH meter based on hybrid xerogel doped with Methyl Red
248
Development of a textural index for the prediction of acid rock drainage
249
Development of a texture averaged Reynolds equation
250
Development of a theoretical decoupled Stirling cycle engine
251
Development of a theoretical model for predicting the thermal performance characteristics of a vertical pin-fin array heat sink under combined forced and natural convection with impinging flow
252
DEVELOPMENT OF A THEORETICAL MODEL FOR TRACING FACILITATORS AND BARRIERS IN ADAPTIVE IMPLEMENTATION OF INNOVATIVE PRACTICES IN DEMENTIA CARE
253
Development of a theoretical process map for laser cladding using two-dimensional conduction heat transfer model
254
Development of a theory-based internet program promoting maintenance of diet and physical activity change to 8-year-old African American girls
255
Development of a Theory-Based Intervention to Improve Patient Adherence to Outpatient Pelvic Inflammatory Disease Treatment
256
Development of a thermal barrier material using combustion synthesis
257
Development of a thermal barrier material using combustion synthesis
258
Development of a thermal desorption gas chromatography–mass spectrometry method for quantitative determination of haloanisoles and halophenols in wineries’ ambient air
259
Development of a thermal desorption-gas chromatography–mass spectrometry method for determining personal care products in air
260
Development of a thermal energy storage model for EnergyPlus
261
Development of a thermal lattice Boltzmann method to simulate heat transfer problems with variable thermal conductivity
262
Development of a thermal model for automotive twin-tube shock absorbers
263
Development of a thermal neutron sensor for Humanitarian Demining
264
Development of a thermal oil operated waste heat exchanger within the off-gas of an electric arc furnace at steel mills
265
Development of a thermal precipitator for sensitive mass measurement of aerosol particles
266
Development of a thermal switch for faster cool-down by two-stage cryocooler Original Research Article
267
Development of a thermal-hydraulic analysis code for CARR
268
Development of a thermal–hydraulic analysis code for the Pebble Bed Water-cooled Reactor
269
Development of a thermal-hydraulic analysis software for the Chinese advanced pressurized water reactor Original Research Article
270
Development of a thermal–hydraulic system code, TAPINS, for 10 MW regional energy reactor
271
Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings
272
Development of a Thermodynamic Database for Cemented Carbides for Design and Processing Simulations
273
Development of a thermodynamic model for hydrogen and hydrogen containing mixtures
274
Development of a thermodynamic performance-analysis program for CO2 geothermal heat pump system
275
Development of a thermodynamically consistent, robust and efficient phase equilibrium solver and its validations
276
Development of a thermoeconomic methodology for optimizing biodiesel production. Part II: Manufacture exergetic cost and biodiesel production cost incorporating carbon credits, a Brazilian case study
277
Development of a thermoeconomic methodology for the optimization of biodiesel production—Part I: Biodiesel plant and thermoeconomic functional diagram
278
Development of a thermoelectric battery-charger with microcontroller-based maximum power point tracking technique
279
Development of a thermoelectric refrigerator with two-phase thermosyphons and capillary lift
280
Development of a thermoelectric self-powered residential heating system
281
Development of a Thermofluid Model for Axial Field Permanent-Magnet Machines
282
Development of a thermogravimetric analysis (TGA) method for quantitative analysis of wood flour and polypropylene in wood plastic composites (WPC)
283
Development of a thermo-hydraulic bypass leakage test method for the Wendelstein 7-X target element cooling structure
284
Development of a thermomechanical cutting process model for machining process simulations
285
Development of a Thermophysical Handy Tester for Non-Destructive Evaluation of Engineering Materials
286
Development of a thermostable firefly luciferase Original Research Article
287
Development of a thick gas electron multiplier for microdosimetry
288
Development of a thick gas electron multiplier for microdosimetry
289
Development of a thin drift chamber for the double beta decay experiment
290
Development of a thin film solar cell interconnect for the PowerSphere concept
291
Development of a thin section device for space exploration: Overview and system performance estimates Original Research Article
292
Development of a thin section device for space exploration: Rock cutting mechanism Original Research Article
293
Development of a thinned back-illuminated CMOS active pixel sensor for extreme ultraviolet spectroscopy and imaging in space science
294
Development of a thinned back-illuminated CMOS active pixel sensor for extreme ultraviolet spectroscopy and imaging in space science
295
DEVELOPMENT OF A THREE BAND RADAR SYSTEM FOR DETECING TRAPPED ALIVE HUMANS UNDER BUILDING RUINS
296
Development of a three dimensional four mirror optical cavity for laser-Compton scattering
297
Development of a three dimensional four mirror optical cavity for laser-Compton scattering
298
Development of a three-dimensional computational slag flow model for coal combustion and gasification
299
Development of a three-dimensional data acquisition method for standardization of beta-emitting nuclides
300
Development of a three-dimensional in vitro model system to study orthodontic tooth movement
301
Development of a three-dimensional inventory of aircraft NOx emissions over China
302
Development of a three-dimensional jaw-tracking system implanted in the freely moving mouse
303
Development of a three-dimensional microfluidic system for long-term tumor spheroid culture
304
Development of a three-dimensional mixed variational model for woven composites. I. Mathematical formulation
305
Development of a three-dimensional mixed variational model for woven composites. II. Numerical solution and validation
306
Development of a three-dimensional multiscale agent-based tumor model: Simulating gene-protein interaction profiles, cell phenotypes and multicellular patterns in brain cancer
307
Development of a three-dimensional simulation system for micro-inkjet and its experimental verification
308
Development of a three-dimensional simulation system for micro-inkjet and its experimental verification
309
Development of a three-dimensional unit cell to model the micromechanical response of a collagen-based extracellular matrix
310
Development of a three-dimensional vibrating tactile probe for miniature CMMs
311
DEVELOPMENT OF A THREE-DIMENSIONAL VISCOUS AEROELASTIC SOLVER FOR NONLINEAR PANEL FLUTTER
312
Development of a three-echelon SC model to optimize coordination costs
313
Development of a three-phase fluidized bed reactor with enhanced oxygen transfer
314
Development of a three-point bending fatigue testing methodology at 20 kHz frequency
315
Development of a three-stage system for the treatment and reclamation of wastewater containing nano-scale particles Original Research Article
316
Development of a three-stage, light-gas gun at the University of Dayton Research Institute
317
Development of a three-steps derivatization assay for the localization of double bond in monounsaturated monomers of poly-beta-hydroxyalkanoates by GC–MS
318
Development of a thyristor valve for next generation 500 kV HVDC transmission systems
319
Development of a TiAl turbocharger for passenger vehicles
320
Development of a TiAl turbocharger for passenger vehicles
321
Development of a Time Projection Chamber using CF4 gas for relativistic heavy ion experiments
322
Development of a Time Projection Chamber using CF4 gas for relativistic heavy ion experiments
323
Development of a time projection chamber using gas electron multipliers (GEM–TPC)
324
Development of a time projection chamber using gas electron multipliers (GEM–TPC)
325
Development of a time projection chamber with micro-pixel electrodes
326
Development of a time projection chamber with micro-pixel electrodes
327
Development of a time-of-flight mass spectrometer for ion desorption studies at HiSOR
328
Development of a time-of-flight mass spectrometer for ion desorption studies at HiSOR
329
Development of a timesaving leak detection method for brick-type packages Original Research Article
330
Development of a time–temperature indicator (TTI) label by rotary printing technologies
331
Development of a time-to-detect growth model for heat-treated Bacillus cereus spores
332
Development of a TiO2/AC Composite Photocatalyst by Dry Impregnation for the Treatment of Methanol in Humid Airstreams
333
Development of a tissue-engineered vascular graft combining a biodegradable scaffold, muscle-derived stem cells and a rotational vacuum seeding technique
334
Development of a titania nanotube (TNT) loaded site-selectively with Pt nanoparticles and their photocatalytic activities Original Research Article
335
Development of a titanium alloy suitable for an optimized coating with hydroxyapatite
336
Development of a titanium dioxide nanoparticle pipette-tip for the selective enrichment of phosphorylated peptides
337
Development of a titanium tungstate-based 188W/188Re gel generator using tungsten of natural isotopic abundance
338
Development of a T-joint for covalent molecular construction based on 2,2′-bipyridine and phenanthroline isocyanide metal complexes
339
Development of a ToF version of the desktop MiniSIMS utilising a continuous primary ion beam
340
Development of a tokamak reactor system code and its application for concept development of a demo reactor
341
Development of a tool for assessing the ecological quality status of intertidal coastal rocky assemblages, within Atlantic Iberian coasts
342
Development of a Tool for Environmental Performance Evaluation in Ports: A Case Study based on the Delphi Technique in Port Environment
343
Development of a Tool for evaluating the Social Capital of the academic system in Mashhad University of Medical Sciences in 2020
344
Development of a tool for measuring the concept of good care among patients and staff in relation to Swedish legislation Original Research Article
345
Development of a tool for measuring the degradation capacity of microorganisms for a xenobiotic
346
Development of a tool for selecting mobile shopping site: A customer perspective
347
Development of a TOP counter for the Super B factory
348
Development of a TOP counter for the Super B factory
349
DEVELOPMENT OF A TOPPING MACHINE TO SUIT MECHANICAL HARVESTING OF SUGAR BEET
350
Development of a total analytical system by interfacing membrane extraction, pervaporation and high-performance liquid chromatography
351
Development of a total maximum daily load (TMDL) for acid-impaired lakes in the Adirondack region of New York
352
Development of a total quality scoring system based on consumer preference weightings and sensory profiles: application to fruit dates (Tamr)
353
Development of a tourism sustainability assessment procedure: a conceptual approach
354
Development of a Toxicological Gene Array and Quantitative Assessment of This Technology
355
Development of a TPC detector for the ALICE experiment
356
Development of a TPC detector for the ALICE experiment
357
Development of a TPC detector for the ALICE experiment
358
Development of a TPC detector for the ALICE experiment
359
Development of a Tracked Climbing Robot
360
Development of a tracking and steering system in a network environment
361
Development of a tracking detector system with multichannel scintillation fibers and PPD
362
Development of a tracking detector system with multichannel scintillation fibers and PPD
363
Development of a tractor dynamic stability index calculator utilizing some tractor specifications
364
DEVELOPMENT OF A TRACTOR-TRAILED RICE CLEANING AND MILLING MACHINE
365
Development of a Training Software to Improve Speechin- Noise Perception in the Elderly with Noise-Induced Hearing Loss
366
Development of a trajectory generation method for a five-axis NC machine
367
Development of a transgenic mouse for hepatitis C virus core protein-induced liver disease
368
Development of a transient CD4+CD8+ T cell subset in the cervical lymph nodes following intratracheal instillation with an adenovirus vector
369
Development of a transient response technique for heterogeneous catalysis in liquid phase, Part 2: Applying membrane inlet mass spectrometry (MIMS) for detection of dissolved gasses
370
Development of a transient response technique for heterogeneous catalysis in the liquid phase, Part 1: Applying an electrospray ionization mass spectrometry (ESI-MS) detector
371
Development of a transit network from a street map database with spatial analysis and dynamic segmentation
372
Development of a Transition Process Scale for High-risk Infant’s Caregiver
373
Development of a transmission geometry X-ray diffraction system for measuring the austenite to martensite phase transformation in 304 L stainless steel
374
Development of a transmission geometry X-ray diffraction system for measuring the austenite to martensite phase transformation in 304 L stainless steel
375
Development of a transmission positron microscope
376
Development of a transmission positron microscope
377
Development of a transverse to orogen parallel extension lineation in a complex collisional setting, Trans-Hudson Orogen, Manitoba, Canada
378
Development of a trauma and emergency database in Kigali, Rwanda
379
Development of a traveling wave resonant ring of the JNC high-power, high-duty electron linac
380
Development of a traveling wave resonant ring of the JNC high-power, high-duty electron linac
381
Development of a traveling wave resonant ring of the JNC high-power, high-duty electron linac
382
Development of a treatment system for molasses wastewater: The effects of cation inhibition on the anaerobic degradation process
383
DEVELOPMENT OF A TRI-AXIAL LOAD CELL BASED ON STRAIN GAGES
384
Development of a triazole-cure resin system for composites: Evaluation of alkyne curatives
385
Development of a tribolelectric procedure for the measurement of mixing and drying in a vibrated fluidized bed
386
Development of a trigger system with scintillating fibers and SiPM readout for the AMADEUS experiment
387
Development of a trigger system with scintillating fibers and SiPM readout for the AMADEUS experiment
388
Development of a Tripeptide Mimetic Strategy for the Inhibition of Protein Farnesyltransferase
389
Development of a triple GEM UV-photon detector operated in pure CF4 for the PHENIX experiment
390
Development of a triple GEM UV-photon detector operated in pure CF4 for the PHENIX experiment
391
Development of a triple hyphenated HPLC–radical scavenging detection–DAD–SPE–NMR system for the rapid identification of antioxidants in complex plant extracts
392
Development of a triple well CMOS MAPS device with in-pixel signal processing and sparsified readout capabilities
393
Development of a triple well CMOS MAPS device with in-pixel signal processing and sparsified readout capabilities
394
Development of a tritium fuel processing system using an electrolytic reactor for ITER
395
Development of a tritium separation process using SDGC
396
Development of a Trypanosoma cruzi (TcI) isolate in the digestive tract of an unfamiliar vector, Triatoma brasiliensis (Hemiptera, Reduviidae)
397
Development of a Tuberculosis Vaccine Seed: Construction of Resuscitation- Promoting Factor B DNA Vaccine and its Expression in Vitro and in Vivo
398
Development of a tube-type solar still equipped with heat accumulation for irrigation
399
Development of a tubular fluoride potentiometric detector for flow analysis: Evaluation and analytical applications Original Research Article
400
Development of a tubular high-density plasma reactor for water treatment
401
Development of a tundra-specific snow water equivalent retrieval algorithm for satellite passive microwave data
402
DEVELOPMENT OF A TUNGSTEN HEAVY ALLOY, W-Ni-Mn, USED AS KINETIC ENERGY PENETRATOR
403
Development of a turbulence-free casting technique for titanium aluminides
404
Development of a two dimensional scanning Seebeck coefficient measurement system by a micro-probe method
405
DEVELOPMENT OF A TWO PHASE ANAEROBIC DIGESTER FOR THE TREATMENT OF MIXED ABATTOIR WASTES
406
DEVELOPMENT OF A TWO PHASE ANAEROBIC DIGESTER FOR THE TREATMENT OF MIXED ABATTOIR WASTES
407
Development of a two separate phase submerged biocatalytic membrane reactor for the production of fatty acids and glycerol from residual vegetable oil streams
408
Development of a two-band enhanced vegetation index without a blue band
409
Development of a two-band spectral imaging system for real-time citrus canker detection Original Research Article
410
Development of a two-body wet abrasion test method with attention to the effects of reused abradant
411
Development of a two-color laser fluorescence detector: On-line detection of internal standards and unknowns by capillary electrophoresis within the same sample
412
Development of a two-color picosecond optical parametric oscillator, pumped by a Nd:YAG laser mode locked using a nonlinear mirror, for doubly-resonant sum frequency generation spectroscopy
413
Development of a two-dimensional ASIC for hard X-ray spectroscopy and imaging with a CdTe pixel detector
414
Development of a two-dimensional ASIC for hard X-ray spectroscopy and imaging with a CdTe pixel detector
415
Development of a two-dimensional coupled-implicit numerical tool for analysis of the CDI operation Original Research Article
416
Development of a two-dimensional coupled-implicit numerical tool for the optimal design of CDI electrodes Original Research Article
417
Development of a two-dimensional high-performance liquid chromatography system coupled with on-line reduction as a new efficient analytical method of 3-nitrobenzanthrone, a potential human carcinogen
418
Development of a two-dimensional liquid chromatography system with trapping and sample enrichment capabilities
419
Development of a two-dimensional liquid species concentration measurement technique based on absorptiometry
420
Development of a two-dimensional model for the thermohydraulic analysis of the hot pool in liquid metal reactors
421
Development of a two-dimensional model of a compliant non-pneumatic tire
422
Development of a two-dimensional multi-grid-type microstrip gas chamber for spallation neutron source
423
Development of a two-dimensional multi-grid-type microstrip gas chamber for spallation neutron source
424
Development of a two-dimensional nuclear-thermal-coupled analysis code for conceptual blanket design of fusion reactors
425
Development of a two-dimensional phase-grating mask for fabrication of an analog-resist profile
426
Development of a two-dimensional protein–peptide separation protocol for comprehensive proteome measurements
427
Development of a two-dimensional strip radiation sensor fabricated with normal silicon processes
428
Development of a two-dimensional strip radiation sensor fabricated with normal silicon processes
429
Development of a two-fold segmented detection system for near horizontally cosmic-ray muons to probe the internal structure of a volcano
430
Development of a two-fold segmented detection system for near horizontally cosmic-ray muons to probe the internal structure of a volcano
431
Development of a two-leaf light use efficiency model for improving the calculation of terrestrial gross primary productivity
432
Development of a two-stage electrodialysis set-up for economical desalination of sea-type artesian and surface waters
433
Development of a two-stage inspection process for the assessment of deteriorating infrastructure
434
Development of a two-stage inspection process for the assessment of deteriorating infrastructure
435
Development of a two-stage magnetic electron-guide
436
Development of a two-stage magnetic electron-guide
437
Development of a two-stage metal hydride system as topping cycle in cascading sorption systems for cold generation
438
Development of a two-step injector for GC–MS with on-column derivatization, and its application to the determination of amphetamine-type stimulants (ATS) in biological specimens
439
Development of a two-step segregated model for the optimization of plant cell growth
440
Development of a type of a one-dimensional position-sensitive scintillator–fiber detector for X-ray backscatter imaging
441
Development of a type of a one-dimensional position-sensitive scintillator–fiber detector for X-ray backscatter imaging
442
Development of a typology for transitional waters in the Mediterranean ecoregion: The case of the islands
443
Development of a tyre traction testing facility
444
Development of a tyrosinase biosensor based on gold nanoparticles-modified glassy carbon electrodes: Application to the measurement of a bioelectrochemical polyphenols index in wines Original Research Article
445
Development of a UBFC biocatalyst fuel cell to generate power and treat industrial wastewaters
446
Development of a unified data meta-model for CAD-CAPP-MRP-NC verification integration
447
Development of a unified framework for calculating molecular weight distribution in diffusion controlled free radical bulk homo-polymerization
448
Development of a unified model for the steady-state operation of single-phase natural circulation loops
449
Development of a Unifying Theory for Data Mining Using Clustering Technique
450
Development of a Unique Biometric-based Cryptographic Key Generation with Repeatability using Brain Signals
451
Development of a Unique Biometric-based Cryptographic Key Generation with Repeatability using Brain Signals
452
Development of a unit risk factor for nickel and inorganic nickel compounds based on an updated carcinogenic toxicity assessment
453
Development of a universal book and journal donation resource
454
Development of a universal chemiluminometric genotyping method for high-throughput detection of 7 LDLR gene mutations in greek population
455
Development of a Universal Law Classification: A Retrospective on Library of Congress Class K
456
Development of a universal modeling tool for rechargeable lithium batteries
457
Development of a universal plate-agglutination test for detecting Haemophilus parasuis
458
Development of a Universal Safety Behavior Management System for Coal Mine Workers
459
Development of a urea biosensor based on a polymeric membrane including zeolite Original Research Article
460
Development of a urinary biomarker of human exposure to deoxynivalenol
461
Development of a user-friendly expert system for composite laminate design
462
Development of a UV-based Imaging System for Real-Time Detection and Separation of Dried Figs Contaminated with Aflatoxins
463
Development of a vaccine against Schistosoma japonicum in China: a review
464
Development of a vacuum heat pump dryer for drying chilli
465
Development of a vacuum ultraviolet laser source and its application to the evaluation of phosphor materials for a plasma display panel Original Research Article
466
Development of a Valid and Reliable Diabetes Empowerment Scale: An Iranian Version
467
Development of a valid and reliable malnutrition screening tool for adult acute hospital patients
468
Development of a Valid and Reliable Questionnaire to Identify Professional Opinion Regarding Organ Transplantation System
469
Development of a valid, cost-effective laparoscopic training program
470
Development of a validated capillary electrophoresis method for enantiomeric purity testing of dexchlorpheniramine maleate
471
Development of a validated HPLC method for determination of an active component in Pycnocycla spinosa and tablets prepared from its extract
472
Development of a validated HPLC method for the determination of iodotyrosines and iodothyronines in pharmaceuticals and biological samples using solid phase extraction
473
Development of a validated HPLC method for the determination of sennoside A and B, two major constituents of Cassia obovata Coll.
474
Development of a validated HPLC method for the simultaneous determination of flavonoids in Cuscuta chinensis Lam. by ultra-violet detection
475
Development of a Validated HPLC/Photodiode Array Method for the Determination of Isomenthone in the Aerial Parts of Ziziphora tenuior L.
476
Development of a validated liquid chromatographic method for the quality control of Prunellae Spica: Determination of triterpenic acids Original Research Article
477
Development of a validated liquid chromatography method for the simultaneous determination of eight fat-soluble vitamins in biological fluids after solid-phase extraction
478
Development of a validated liquid chromatography tandem mass spectrometry assay for a PEGylated adnectin in cynomolgus monkey plasma using protein precipitation and trypsin digestion
479
Development of a Validated Model for English Learners’ Cultural Identity: Using Their Perceptions and Attitudes
480
Development of a Validated Model for English Learners’ Cultural Identity: Using their Perceptions and Attitudes
481
Development of a validated model to describe the individual and combined water activity depressing effects of water soluble salt, sugar and fat replacers Original Research Article
482
Development of a validated UPLC-qTOF-MS Method for the determination of curcuminoids and their pharmacokinetic study in mice
483
Development of a value-added soil conditioner from high shear co-granulation of organic waste and limestone powder
484
Development of a valved linear compressor for a satellite borne J–T cryocooler Original Research Article
485
Development of a valve-regulated lead−acid battery with thin tubular positive plates for improved specific energy and optimization for low charge-factor operation
486
Development of a vapor-dominated reservoir with a “high-temperature” component Original Research Article
487
Development of a vapor–liquid phase change model for volume-of-fluid method in FLUENT
488
Development of a variable configuration cascade impactor for aerosol size distribution measurement
489
Development of a variable-path-length diffusive sampler for ammonia and evaluation of ammonia pollution in the urban area of Rome, Italy
490
Development of a variational scheme for model inversion of multi-area model of brain. Part I: Simulation evaluation
491
Development of a variational scheme for model inversion of multi-area model of brain. Part II: VBEM method
492
Development of a vehicle to study the tractive performance of integrated steering-drive systems
493
Development of a ventilation system utilizing thermal energy storage for granules containing phase change material
494
Development of a versatile and modular test system for ATLAS hybrid pixel detectors
495
Development of a versatile and modular test system for ATLAS hybrid pixel detectors
496
Development of a versatile intra-articular pressure sensing array
497
Development of a versatile, easy and rapid atmospheric monitor for benzene, toluene, ethylbenzene and xylenes determination in air
498
Development of a vertical gradient freeze process for low EPD GaAs substrates
499
Development of a very fast spectral response measurement system for analysis of hydrogenated amorphous silicon solar cells and modules
500
Development of a very large area microstrip gas chamber for the CMS central tracking system
501
Development of a very sensitive electrochemical magneto immunosensor for the direct determination of ochratoxin A in red wine
502
Development of a Vibrating Wire Strain Gauge for Measuring Small Strains in Concrete Beams
503
Development of a vibration based method to update axial shortening of vertical load bearing elements in reinforced concrete buildings
504
Development of a view-invariant representation of the human head
505
Development of a virtual active fire product for Africa through a synthesis of geostationary and polar orbiting satellite data
506
Development of a virtual learning environment to enhance undergraduate nursing students’ effectiveness and interest in working with older people
507
Development of a virtual linearizer for correcting transducer static nonlinearity
508
Development of a virtual power market model to investigate strategic and collusive behavior of market players
509
Development of a virtual reality simulator for the ITER blanket remote handling system
510
Development of a Virus-Induced Gene-Silencing System for Hexaploid Wheat and Its Use in Functional Analysis of the Lr21-Mediated Leaf Rust Resistance Pathway
511
Development of a visual test kit for estimation of total polyphenols in tea
512
Development of a visualization method suitable to present tendencies of changes in precipitation
513
Development of a volatile amine sensor for the monitoring of fish spoilage
514
Development of a voltage-behavior model for NiMH batteries using an impedance-based modeling concept
515
Development of a voltammetric procedure for assay of the antihistamine drug hydroxyzine at a glassy carbon electrode: Quantification and pharmacokinetic studies
516
Development of a voltammetric sensor for catechol in nanomolar levels using a modified electrode with Cu(phen)2(TCNQ)2 and PLL
517
Development of a voltammetric sensor for chromium(VI) determination in wastewater sample
518
Development of a voltammetric sensor for diospyrin determination in nanomolar concentrations
519
Development of a volumetric method—experimental test bench for hydrogen storage characterisation
520
Development of a VRLA battery with improved separators, and a charge controller, for low cost photovoltaic and wind powered installations
521
Development of a V-shape bis(tetraoxacalix[2]arene[2]triazine) stationary phase for High performance liquid chromatography
522
Development of a walk-behind type hand tractor powered vegetable transplanter for paper pot seedlings
523
Development of a walkway for the simultaneous measurement of bilateral ground reaction forces and temporo-spatial determinants of gait
524
DEVELOPMENT OF A WALL PLUME FROM A BOUNDARY LAYER ALONG A PARTIALLY HEATED VERTICAL WALL
525
Development of a Washer-Dryer with Kansei Ergonomics
526
Development of a Waste Load Allocation Model for the Charleston Harbor Estuary, Phase II: Water Quality
527
Development of a water clear of sea ice detection algorithm from enhanced SeaWinds/QuikSCAT and AMSR-E measurements
528
Development of a water detritiation facility for JET
529
Development of a water hyacinth based vermireactor using an epigeic earthworm Eisenia foetida
530
Development of a water industry manual for biosolids use in short rotation forestry
531
Development of a water quality modeling system for river pollution index and suspended solid loading evaluation
532
Development of a water-jet assisted laser paint removal process
533
Development of a Water-Optional Healthcare Personnel Handwash May Allow for Increased Compliance
534
Development of a waveguide NbN-based SIS mixer in the 900-GHz band
535
Development of a wavenumber-preserving scheme for solving Maxwell’s equations in curvilinear non-staggered grids
536
Development of a WD-XRF analysis method of minor and trace elements in liquid petroleum products
537
Development of a wear model for the analysis of complex railway networks
538
Development of a wear model for the prediction of wheel and rail profile evolution in railway systems
539
Development of a wear prediction tool for steel railway wheels using three alternative wear functions
540
Development of a Wearable Device for Motion Capturing Based on Magnetic and Inertial Measurement Units
541
Development of a Web Application for Management of Learning Styles
542
Development of a web application for water resources based on open source software
543
Development of a Web Based Education Program for Infection Prevention and Control New Employee and Annual Training in a Large Multispecialty Clinic and Hospital Setting
544
Development of a web GIS application for emissions inventory spatial allocation based on open source software tools
545
Development of a Web GIS System Based on the MaxEnt Approach for Wildfire Management: A Case Study of East Azerbaijan
546
Development of a web-based 3D virtual reality program for hydrogen station
547
Development of a web-based decision support system (DSS) for managing large international rivers
548
Development of a web-based decision support system for supporting integrated water resources management in Daegu city, South Korea
549
Development of a web-based Geographic Information System for the management of borehole and geological data
550
Development of a web-based laboratory for control experiments on a coupled tank apparatus
551
Development of a web-based learning medium on mechanism of labour for nursing students
552
Development of a web-based sorption database (KAERI-SDB) and application to the safety assessment of a radioactive waste disposal
553
Development of a Web-based visualization platform for climate research using Google Earth
554
Development of a weighted leanness measurement method in modular construction companie
555
Development of a well-defined silica-supported tungstenocarbyne complex as efficient heterogeneous catalyst for alkyne metathesis
556
Development of a well-of-the-well system-based embryo culture plate with an oxygen sensing photoluminescent probe
557
Development of a Western Blot Assay for Detection of Antibodies against HSV Using Purified HSV Virions Prepared by Sucrose Density Gradient
558
Development of a Wideband and High Gain ESIW H-plane Horn Antenna
559
Development of a Wideband Bi-layered Mantle-Cloak for Perfect Electric Conductor Cylindrical Objects under Obliquely Incident Plane Wave
560
Development of a wide-range paired scintillator with optical fiber neutron monitor for BNCT irradiation field study
561
Development of a wide-range paired scintillator with optical fiber neutron monitor for BNCT irradiation field study
562
Development of a wind environment database in Tokyo for a comprehensive assessment system for heat island relaxation measures
563
Development of a wind forced chiller and its efficiency analysis
564
Development of a wind forced chiller and its efficiency analysis
565
Development of a Windows-based indoor air quality simulation software package
566
Development of a winter snow water equivalent algorithm using in situ passive microwave radiometry over snow-covered first-year sea ice
567
Development of a wireless radioactive material sensor network
568
Development of a wireless radioactive material sensor network
569
Development of a wireless sensor network system for suspension bridge health monitoring
570
Development of a Wittrick–Williams algorithm for the spectral element model of elastic–piezoelectric two-layer active beams
571
Development of a Wittrick–Williams algorithm for the spectral element model of elastic–piezoelectric two-layer active beams
572
Development of a Wittrick–Williams algorithm for the spectral element model of elastic–piezoelectric two-layer active beams
573
Development of a WO3 thick-film-based sensor for the detection of VOC
574
Development of a Wöhler-like approach to quantify the Ti(CxNy) coatings durability under oscillating sliding conditions
575
Development of a workforce management system for a customer hotline service
576
Development of a world-wide web based contour integration test
577
Development of a wrinkling algorithm for orthotropic membrane materials Original Research Article
578
Development of a yeast strain for xylitol production without hydrolysate detoxification as part of the integration of co-product generation within the lignocellulosic ethanol process
579
Development of a yellow ceramic pigment based on silver nanoparticles
580
Development of a Yersinia ruckeri O1 biotype 2 waterborne challenge model for future ERM vaccine testing in rainbow trout
581
Development of a yield sensor for measuring individual weights of onion bulbs
582
Development of a young coconut fruit trimming machine Original Research Article
583
Development of a Young’s modulus model for Gilsocarbon graphites irradiated in inert environments
584
Development of a zebrafish 4-day embryo-larval bioassay to assess toxicity of chemicals
585
Development of A zeolites-supported noble-metal catalysts for CO preferential oxidation: H2 gas purification for fuel cell
586
Development of a zero emission coal-fired power plant by means of mixed ion conducting high temperature membranes Original Research Article
587
Development of a zero-dimensional Diesel combustion model. Part 1: Analysis of the quasi-steady diffusion combustion phase
588
Development of a zero-dimensional Diesel combustion model: Part 2: Analysis of the transient initial and final diffusion combustion phases
589
Development of a β-spectrometer using PIPS technology
590
Development of a γ-γ-perturbed angular correlation one-detector method (1-PAC) for investigation of physico-chemical properties of matter
591
Development of a μ-turbulent flow chromatography focus mode method for drug quantitation in discovery bioanalysis
592
Development of a,b-plane-oriented hydroxyapatite ceramics as models for living bones and their cell adhesion behavior
593
Development of Abelmoschus esculentus (Okra)-Based Mucoadhesive Gel for Nasal Delivery of Rizatriptan Benzoate
594
Development of abnormal tissue architecture in transplanted neonatal rat myocytes
595
Development of Abraham model correlations for solvation characteristics of linear alcohols
596
Development of Abraham model correlations for solvation characteristics of secondary and branched alcohols
597
Development of Academic Skills from Preschool Through Second Grade: Family and Classroom Predictors of Developmental Trajectories
598
Development of accelerated processing techniques for cement-bonded wood particleboard
599
Development of accident dose consequences simulation software for nuclear emergency response applications
600
Development of accidental collapse limit state criteria for offshore structures
601
Development of accounting information system quality in local government: mediating role of accounting competency
602
DEVELOPMENT OF ACCUMULATED SEMI-ACTIVE HYDRAULIC DAMPER
603
Development of accurate classification method based on the analysis of volatile organic compounds from human exhaled air
604
Development of accurate solutions for a classical oscillator
605
Development of acetylated HDD kit for preparation of 188Re-HDD/lipiodol
606
Development of acetylcholinesterase biosensor based on CdTe quantum dots modified cysteamine self-assembled monolayers
607
Development of acetylcholinesterase biosensor based on platinum–carbon aerogels composite for determination of organophosphorus pesticides
608
Development of AChE biosensor for the determination of methyl parathion and monocrotophos in water and fruit samples: A cyclic voltammetric study
609
Development of achievement goals across the transition out of secondary school
610
Development of achiral and chiral 2D HPLC methods for analysis of albendazole metabolites in microsomal fractions using multivariate analysis for the in vitro metabolism
611
Development of acid phosphatase based amperometric biosensors for the inhibitive determination of As(V)
612
Development of acid stable, hyper-crosslinked, silica-based reversed-phase liquid chromatography supports for the separation of organic bases
613
Development of acrylonitrile copolymers for scale control in cooling water systems Original Research Article
614
Development of activated carbon pore structure via physical and chemical activation of biomass fibre waste
615
Development of activation foils method for the IFMIF neutron flux characterization
616
Development of active and stable supported noble metal catalysts for hydrogenation of carbon dioxide to methanol
617
Development of active biofilms of quinoa (Chenopodium quinoa W.) starch containing gold nanoparticles and evaluation of antimicrobial activity
618
Development of active catalysts for low Pt loading cathodes of PEMFC by surface tailoring of nanocarbon materials
619
Development of active control systems on ASDEX upgrade in view of ITER discharge scenarios
620
Development of active edge pixel sensors and four-side buttable modules using vertical integration technologies
621
Development of active edge pixel sensors and four-side buttable modules using vertical integration technologies
622
Development of active films of chitosan isolated by mild extraction with added protein concentrate from shrimp waste
623
development of active learning model type reading guide assisted with macromedia flash in learning reading exposition text for grade 8th mts / smp students
624
Development of active magnetic bearings and ferrofluid seals toward oil free sodium pumps
625
Development of activity coefficient model based on COSMO method for prediction of solubilities of solid solutes in supercritical carbon dioxide
626
Development of activity standard for 90Y microspheres
627
Development of activity-based probes for trypsin-family serine proteases
628
Development of activity-based probes with tunable specificity for protein tyrosine phosphatase subfamilies
629
Development of actual water repellency in a grass-covered dune sand during a dehydration experiment
630
Development of acute dystonia in three brothers due to metoclopramide
631
Development of acute exposure guideline levels for airborne exposures to hazardous substances
632
Development of Acute Lymphoblastic Leukemia with Translocation (4;11) in a Young Girl with Familial Pericentric Inversion 12
633
Development of Acute Promyelocytic Leukemia with Isochromosome 17q after BCR/ABL Positive Chronic Myeloid Leukemia
634
Development of ADAMTS13 inhibitor in a patient with hepatitis C virus-related liver cirrhosis causes thrombotic thrombocytopenic purpura
635
Development of adaptive algorithm for active sound quality control
636
Development of adaptive immunity in rainbow trout, Oncorhynchus mykiss (Walbaum) surviving an infection with Yersinia ruckeri
637
Development of adaptive modeling techniques for non-linear hysteretic systems
638
Development of Adaptive Protection Scheme for Distribution Systems With High Penetration of Distributed Generation
639
Development of additives in negative active-material to suppress sulfation during high-rate partial-state-of-charge operation of lead–acid batteries
640
Development of adenoviral-vector-based pandemic influenza vaccine against antigenically distinct human H5N1 strains in mice
641
Development of adherence techniques for collecting kidney phagocytes from marine fish (Limanda limanda L.)
642
Development of adhesive bonds with reduced fracture strength as NDE benchmarks
643
Development of adiabatic shear band in cold-rolled titanium
644
Development of adsorbents from used tire rubber: Their use in the adsorption of organic and inorganic solutes in aqueous solution
645
Development of Adsorbents-based Cellulose Acetate Mixed Matrix Membranes for Removal of Pollutants from Textile Industry Effluent
646
Development of adsorption air-conditioning technology using modified activated carbon – A review
647
Development of Adsorptive Stripping Voltammetric Procedure for the Determination of Josamycin, a Macrolide Antibiotic
648
Development of advanced Al coating processes for future application as anti-corrosion and T-permeation barriers
649
Development of advanced arresters for GIS with new zinc-oxide elements
650
Development of advanced blanket performance under irradiation and system integration through JUPITER-II project
651
Development of advanced built-in surge arresters for distribution system with new zinc-oxide elements
652
Development of advanced composite ceramic tool material
653
DEVELOPMENT OF ADVANCED CONTROL STATE TECHNOLOGY OF TRANSFORMER AND ELECTRIC MOTOR WINDINGS BASED ON PULSED METHOD
654
Development of advanced CRDM without canopy seal welds Original Research Article
655
Development of advanced duplex surface systems by combining CrAlN multilayer coatings with plasma nitrided steel substrates
656
Development of advanced electrolyte retainers for improvement of the life cycle of valve-regulated lead–acid batteries
657
Development of advanced FDD and FTC techniques with application to an unmanned quadrotor helicopter testbed
658
Development of advanced I&C in nuclear power plants: ADIOS and ASICS
659
Development of advanced I&C in nuclear power plants: ADIOS and ASICS Original Research Article
660
Development of advanced materials for spallation neutron sources and radiation damage simulation based on multi-scale models
661
Development of advanced nickel/metal hydride batteries for electric and hybrid vehicles
662
Development of advanced nuclear fuel cycle system “flexible fuel cycle initiative” for LWR and FBR
663
Development of advanced parking assistance system
664
Development of advanced practice nurses in South Korea
665
Development of advanced quantitative analysis methods for wear particle characterization and classification to aid tribological system diagnosis
666
Development of advanced rechargeable Ni/MH and Ni/Zn batteries
667
Development of advanced scanning electron microscopy techniques for characterization of submicron ash
668
Development of advanced solar assisted drying systems
669
Development of advanced technology for biomass combustion—CFD as an essential tool
670
Development of advanced tritium breeding material with added lithium for ITER-TBM
671
Development of advanced zeolite catalysts for the vapor phase Beckmann rearrangement of cyclohexanone oxime
672
Development of AE Monitoring Method for Corrosion Damage of the Bottom Plate in Oil Storage Tank on the Neutral Sand under Loading
673
Development of Aerobic Granular Sludge for Chemical Industries Wastewater Treatment
674
Development of aerogel Cherenkov counters with wavelength shifters and phototubes
675
Development of aerogel Cherenkov counters with wavelength shifters and phototubes
676
Development of aerogel Cherenkov detectors at Novosibirsk
677
Development of aerogel Cherenkov detectors at Novosibirsk
678
Development of AFEX-based consolidated bioprocessing on wheat straw for biohydrogen production using anaerobic microflora
679
Development of affinity chromatography using a bioactive peptide as a ligand Original Research Article
680
DEVELOPMENT OF AFFITOPE VACCINES FOR ALZHEIMER’S DISEASE (AD) – FROM CONCEPT TO CLINICAL TESTING
681
Development of AFLP markers linked to stem nematode resistance gene in sweet potato (Ipomoea batatas (L.) Lam.)
682
Development of AFM potentiometry for potential mapping of organic conductors
683
Development of Ag-(BaO)0.11(Bi2O3)0.89 composite cathodes for intermediate temperature solid oxide fuel cells
684
Development of agents for reinforcement of fluorescence on near-infrared ray excitation for immunohistological staining Original Research Article
685
Development of Age-Specific Adolescent Metabolic Syndrome Criteria That Are Linked to the Adult Treatment Panel III and International Diabetes Federation Criteria Original Research Article
686
Development of aggregates after application of maize residues in the presence of mycorrhizal and non-mycorrhizal pea plants
687
Development of aggressive phenotypes in zebrafish: interactions of age, experience and social status
688
Development of AgNPs-tragacanth Conjugated Gel as a Novel Green Membrane in Electro-membrane Extraction: Tenofovir Disoproxil Fumarate Assay in Human Plasma Samples
689
Development of Agricultural Machinery Sector: Investigation in Konya Business
690
Development of agri-environmental indicators to assess dairy farm sustainability in Quebec, Eastern Canada
691
Development of agri-pellet production cost and optimum size
692
Development of agro-environmental scenarios to support pesticide risk assessment in Europe Original Research Article
693
Development of air cells in a batch ice cream freezer Original Research Article
694
Development of air purification device through application of thin-film photocatalyst
695
Development of air transportation in the context of globalization in the World and Turkey
696
Development of Air Treatment Technology Using Plasma Method
697
Development of airborne oil thickness measurements
698
Development of Airport-Related Zones (The Construction of The Airport City) as An Element of The Interdependent Development of Airports, Agglomerations and Regions – Gdańsk Airport Case Study
699
Development of Al 6063–TiB2 in situ composites
700
Development of Al added high-Cr ODS steels for fuel cladding of next generation nuclear systems
701
Development of Al2O3 based ceramics for dry friction systems
702
Development of Al2O3/glass-based multi-layer composite seals for planar intermediate-temperature solid oxide fuel cells
703
Development of Al2O3–SiC composite tool for machining application
704
Development of Al356/SiCp cast composites by injection of SiCp containing composite powders
705
Development of alarm-call responses in Beldingʹs ground squirrels: the role of dams
706
Development of albendazole sulfoxide-loaded Eudragit microparticles: A potential strategy to improve the drug bioavailability
707
Development of albumen/soy biobased plastic materials processed by injection molding Original Research Article
708
Development of Alcohol Control Policy in Vietnam: Transnational Corporate Interests at the Policy Table, Global Public Health Largely Absent
709
Development of alcohol dehydrogenase–polypyrrole electrodes by adsorption and crosslinking for ethanol oxidation
710
Development of alcoholic and malolactic fermentations in highly acidic and phenolic apple musts
711
Development of Al-containing zinc-rich paints for corrosion resistance
712
Development of alginate wound dressings linked with hybrid peptides derived from laminin and elastin
713
Development of Alginate/Chitosan Microparticles for Dust Mite Allergen
714
Development of algorithms and approximations for rapid operational air quality modelling
715
DEVELOPMENT OF ALGORITHMS FOR A NEW TOPOLOGICAL METHOD FOR CALCULATING CURRENT DISTRIBUTION COEFFICIENTS IN COMPLEX ELECTRICAL NETWORKS
716
Development of ALICE microstrip detectors at IRST
717
Development of ALICE microstrip detectors at IRST
718
Development of aligned carbon nanotubes layers over stainless steel mesh monoliths
719
Development of aligned-hemp yarn-reinforced green composites with soy protein resin: Effect of pH on mechanical and interfacial properties
720
Development of alkali activated borosilicate inorganic polymers (AABSIP)
721
Development of alkali activated cement from mechanically activated silico-manganese (SiMn) slag
722
Development of alkali-activated binder using hwangtoh without calcination
723
Development of alkali-induced electronic states at GaAs(0 0 1) surfaces and their electron-transfer interaction with helium metastable atoms
724
Development of alkali-induced electronic states at GaAs(0 0 1) surfaces and their electron-transfer interaction with helium metastable atoms
725
Development of alkaline direct methanol fuel cells based on crosslinked PVA polymer membranes
726
Development of allergen-specific T-cell memory in atopic and normal children
727
Development of alloy-film coated dispenser cathode for terahertz vacuum electron devices application
728
Development of all-solid lithium-ion battery using Li-ion conducting glass-ceramics
729
Development of Al–Ni–Mg–(Cu) aluminum P/M alloys
730
Development of alpha lithium aluminate matrix for molten carbonate fuel cell
731
Development of alpha plaster from phosphogypsum for cementitious binders
732
Development of Al–Si–Mg alloys reinforced with diboride particles
733
Development of Al–Si–Zn–Sr filler metals for brazing 6061 aluminum alloy
734
Development of alternative as-rolled alloys to replace quenched and tempered steels with tensile strength in the range of 600–800 MPa
735
Development of alternative broadband infrastructures – Case studies from Denmark
736
Development of alternative energy sources for GHG emissions reduction in the textile industry by energy recovery from cotton ginning waste
737
Development of alternative fuel assembly for WWER-1000 reactor Original Research Article
738
Development of alternative methods for surface thermal loading simulation
739
Development of alumina supported ternary mixed matrix membranes for separation of H2/light-alkane mixtures
740
Development of aluminium composites with in situ formed AlTiSi reinforcements through infiltration
741
Development of aluminum (Al5083)-clad ternary Ag–In–Cd alloy for JSNS decoupled moderator
742
Development of aluminum hydroxides in Al–Mg–Si/SiCp in infiltrated composites exposed to moist air
743
Development of aluminum load-carrying space frame for building structures
744
Development of aluminum-alloy coating on type 316SS for nuclear systems using liquid lead–bismuth
745
Development of Ambient Intelligence Applications using Components and Aspects
746
Development of Ambient Intelligence Systems Based on Collaborative Task Models
747
Development of amine functionalized co-polymeric resins for selective fluoride sorption
748
Development of amino acid and amino acid-complex based solid sorbents for CO2 capture
749
Development of amino acid composition database for Korean foods
750
Development of amino acid composition database for Korean foods
751
Development of AML with t(8;21)(q22;q22) and RUNX1-RUNX1T1 fusion following Philadelphia-negative clonal evolution during treatment of CML with Imatinib
752
Development of ammonium tartrate as an ESR dosimeter material for clinical purposes
753
Development of amorphous and nanocrystalline Al65Cu35−xZrx alloys by mechanical alloying
754
Development of amorphous and nanocrystalline Al65Cu35−xZrx alloys by mechanical alloying
755
Development of amorphous and nanocrystalline Al65Cu35−xZrx alloys by mechanical alloying
756
Development of amorphous carbon coating with luminescent silica/CdSe/ZnS quantum dots underlayer for wear monitoring
757
Development of amorphous phase dispersed Al-rich composites by rolling of mechanically alloyed amorphous Al–Ni–Ti powders with pure Al
758
Development of amorphous PLA-montmorillonite nanocomposites
759
Development of amperometric arsine gas sensor using gold-modified diamond electrodes
760
Development of amperometric biosensors based on the immobilization of enzymes in polymer films electrogenerated from a series of amphiphilic pyrrole derivatives
761
Development of amperometric biosensors using thiolated tetrathiafulvalene-derivatised self-assembled monolayer modified electrodes
762
Development of amperometric glucose biosensor based on glucose oxidase co-immobilized with multi-walled carbon nanotubes at low potential
763
Development of amperometric glucose biosensor through immobilizing enzyme in a Pt nanoparticles/mesoporous carbon matrix
764
Development of amperometric immunoassays (AIAs) for calpastatin and μ-calpain with possible applications in the biomedical field
765
Development of amperometric laccase biosensor through immobilizing enzyme in copper-containing ordered mesoporous carbon (Cu-OMC)/chitosan matrix
766
Development of amperometric l-tyrosine sensor based on Fe-doped hydroxyapatite nanoparticles
767
Development of amphiphilic, enzymatically-degradable PEG-peptide conjugate as cell crosslinker for spheroid formation
768
Development of an "Electroptode" Immunosensor: Indium Tin Oxide-Coated Optical Fiber Tips Conjugated with an Electropolymerized Thin Film with Conjugated Cholera Toxin B Subunit
769
Development of an “electrically wired” amperometric immunosensor for the determination of biotin based on a non-diffusional redox osmium polymer film containing an antibody to the enzyme label horseradish peroxidase
770
Development of an 123I-metaiodobenzylguanidine Myocardial Three-Dimensional Quantification Method for the Diagnosis of Lewy Body Disease
771
Development of an 8×8 array of LaBr3(Ce) scintillator pixels for a gaseous Compton gamma-ray camera
772
Development of an 8×8 array of LaBr3(Ce) scintillator pixels for a gaseous Compton gamma-ray camera
773
Development of an 80-year-old mixed stand with retained Pinus sylvestris in Northern Sweden
774
Development of an ab initio MO-MD program based on fragment MO method – an attempt to analyze the fluctuation of protein
775
Development of an abrasion resistant steel composite with in situ TiC particles
776
Development of an absolute quantification method targeting growth hormone biomarkers using liquid chromatography coupled to isotope dilution mass spectrometry
777
Development of an Academic Course in Person-Centred Care for Students in Higher Education: Teachers’ Perspectives
778
Development of an accelerated low-pH reversed-phase liquid chromatography column stability test
779
Development of an accelerator based determination of aluminum burden in peripheral bone by neutron activation analysis
780
Development of an accelerator driven neutron activator for medical radioisotope production
781
Development of an accelerator driven neutron activator for medical radioisotope production
782
Development of an Accident Reproduction Simulator System Using a Hemodialysis Extracorporeal Circulation System
783
Development of an accommodating intra-ocular lens—In vitro prevention of re-growth of pig and rabbit lens capsule epithelial cells
784
Development of an Accommodation-Dependent Eye Model and Studying the Effects of Accommodation on Electron and Proton Dose Conversion Coefficients
785
Development of an Accommodation-Dependent Eye Model and Studying the Effects of Accommodation on Electron and Proton Dose Conversion Coefficients
786
Development of an accreditation model for health education and promotion programs in the Iranian primary healthcare system: a Delphi study
787
Development of an accurate and reliable hourly flood forecasting model using wavelet–bootstrap–ANN (WBANN) hybrid approach
788
Development of an accurate cavitation coupled spray model for diesel engine simulation
789
Development of an Accurate Positioning System Using Low-Cost L1 GPS Receivers
790
Development of an accurate procedure for the determination of arsenic in fish tissues of marine origin by inductively coupled plasma mass spectrometry
791
Development of an accurate procedure for the determination of arsenic in fish tissues of marine origin by inductively coupled plasma mass spectrometry
792
Development of an acetylcholinesterase immobilized flow through amperometric detector based on thiocholine detection at a silver electrode
793
DEVELOPMENT OF AN ACHIEVEMENT TEST ABOUT SOLUTIONS AND THEIR PHYSICAL PROPERTIES BASED ON BLOOM’S REVISED TAXONOMY: VALIDITY AND RELIABILITY
794
DEVELOPMENT OF AN ACID RESISTANT CONCRETE: A REVIEW
795
Development of an Acoustic Metamaterials for Aero Acoustic Noise Control
796
Development of an acoustic transceiver for the KM3NeT positioning system
797
Development of an acoustic transceiver for the KM3NeT positioning system
798
Development of an activated carbon-packed microbial bioelectrochemical system for azo dye degradation
799
Development of an active clamping system for noise and vibration reduction
800
Development of an active Ga2O3 supported palladium catalyst for the synthesis of methanol from carbon dioxide and hydrogen Original Research Article
801
Development of an active platine-based catalyst for the reaction of H2 production from NaBH4
802
Development of an Active Solar Crop Dryer - Design Analysis and Performance Evaluation
803
Development of an active sorbent from fly ash for dry desulphurization of simulated flue gas in a fluidized-bed reactor
804
Development of an active target for search
805
Development of an active target for search
806
Development of an actively cooled periscope head suitable for divertor observation during quasi-continuous operation of the W7-X stellarator
807
Development of an activity based costing model for a government hospital
808
Development of an adapted empirical drought index to the Mediterranean conditions for use in forestry
809
Development of an adaptive Discontinuous-Galerkin finite element method for advection–reaction equations Original Research Article
810
Development of an adaptive fuzzy behavioural control system with experimental and industrial applications
811
Development of an adaptive fuzzy logic-based inverse dynamic model for laser cladding process
812
Development of an adaptive fuzzy logic-based inverse dynamic model for laser cladding process
813
Development of an adaptive learning case recommendation approach for problem-based e-learning on mathematics teaching for students with mild disabilities
814
Development of an adaptive marine ecosystem management and co-management plan at the Shiretoko World Natural Heritage Site
815
Development of an adaptive multimedia program to collect patient health data
816
Development of an adaptive neuro-fuzzy classifier using linguistic hedges: Part 1
817
Development of an adaptive response surface method for optimization of computation-intensive models
818
Development of an adaptive Smith predictor-based self-tuning PI controller for an HVAC system in a test room
819
Development of an adjective checklist to measure five FACES of fatigue and sleepiness: Data from a national survey of insomniacs
820
Development of an adjustable beam flattening system for modification of passive beam delivery technique in proton therapy
821
Development of an adjustable beam flattening system for modification of passive beam delivery technique in proton therapy
822
Development of an Admittance Sensor for Isoniazid using Differential Coulometric FFT Admittance Voltammetry in a Flow Injection Analysis System
823
Development of an adsorption chiller and heat pump for domestic heating and air-conditioning applications
824
Development of an adsorption procedure for the direct separation and purification of prodigiosin from culture broth
825
Development of an advanced antineutrino detector for reactor monitoring
826
Development of an advanced antineutrino detector for reactor monitoring
827
Development of an advanced A-TIG (AA-TIG) welding method by control of Marangoni convection
828
Development of an advanced biological treatment system applied to the removal of nitrogen and phosphorus using the sludge ceramics
829
Development of an advanced ceramic tool material—functionally gradient cutting ceramics
830
Development of an advanced ceramic tool material—functionally gradient cutting ceramics
831
Development of an advanced Compton camera with gaseous TPC and scintillator
832
Development of an advanced Compton camera with gaseous TPC and scintillator
833
Development of an advanced computer simulation technique for the modeling of rubber curing process
834
Development of an advanced human–machine interface for next generation nuclear power plants
835
Development of an advanced MEA to use high-concentration methanol fuel in a direct methanol fuel cell system
836
Development of an advanced one-dimensional stem heating model for application in surface fires
837
Development of an Advanced Optical Coherence Tomography System for Radiation Dosimetry
838
Development of an advanced power system stabilizer using a strict linearization approach
839
Development of an Advanced Public Transportation System for captive commuters on urban arterials in Ilorin, Nigeria
840
Development of an advanced X-ray detector for inspecting inner microscopic structural details in industrial applications
841
Development of an advanced X-ray detector for inspecting inner microscopic structural details in industrial applications
842
Development of an advanced, thermally stable, coal-based jet fuel
843
Development of an aerosol challenge for smoke detectors used in semiconductor clean rooms
844
Development of an Aerosol Chemiluminescent Detector Coupled to Capillary Electrophoresis for Saccharide Analysis
845
Development of an aerosol shock tube for kinetic studies of low-vapor-pressure fuels
846
Development of an affinity silica monolith containing α1-acid glycoprotein for chiral separations
847
Development of an affinity-driven cross-linker: isolation of a vitamin D receptor associated factor
848
Development of an affordable, sensitive and rapid screening method for mutation detection in UK FH subjects
849
Development of an agent-based system for manufacturing control and coordination with ontology and RFID technology
850
Development of an aggregate indicator to assess the machinability of steels
851
Development of an Air Assisted Fuel Atomizer (Liquid Siphon Type) for a Continuous Combustor
852
Development of an air bleeding technique and specific duration to improve the CO tolerance of proton-exchange membrane fuel cells
853
Development of an air bubble curtain to reduce underwater noise of percussive piling
854
Development of an Air Force Warehouse Logistics Index to continuously improve logistics capabilities
855
Development of an air recirculating tray dryer for high moisture biological materials Original Research Article
856
Development of an air servo displacement sensor
857
Development of an air staging technology to reduce NOx emissions in grate fired boilers
858
Development of an air-breathing direct methanol fuel cell with the cathode shutter current collectors
859
Development of an alcohol fermentation control system based on biosensor measurements interpreted by neural networks
860
Development of an alcohol sensor based on ZnO nanorods synthesized using a scalable solvothermal method
861
Development of an algebraic reaction rate closure for the numerical calculation of turbulent premixed methane, ethylene, and propane/air flames for pressures up to 1.0 MPa
862
Development of an algebraic-closure-based moment method for unsteady Eulerian simulations of particle-laden turbulent flows in very dilute regime
863
Development of an algerian material montmorillonite clay — Intercalation with selective long chain alkylammonium cations (Octadecytrimethylammonium, Cetylpyridium and Tetrabutylammonium) and with tellerium complexes Development of an algerian material mon
864
Development of an Algerian material montmorillonite clay. Adsorption of phenol, 2-dichlorophenol and 2,4,6-trichlorophenol from aqueous solutions onto montmorillonite exchanged with transition metal complexes Original Research Article
865
Development of an algorithm for an EEG-based driver fatigue countermeasure
866
Development of an algorithm for automatic detection and rating of squeak and rattle events
867
Development of an algorithm for online measurement of percent residue cover
868
Development of an algorithm for peak detection in comprehensive two-dimensional chromatography
869
Development of an Algorithm for the Diagnosis of Otitis Media
870
Development of an Algorithm for the Diagnosis of Otitis Media
871
Development of an algorithm to discriminate between valid and false alarms in a loose-parts monitoring system
872
Development of an algorithm to extract thermal diffusivity for the radial converging wave technique
873
Development of an all-atoms force field from ab initio calculations for alternative refrigerants
874
Development of an allele-specific functional marker for studying Hd1 effect on flowering time of rice
875
Development of an Allogeneic Cultured Dermal Substitute Using a Standard Human Fibroblast Bank
876
Development of an Allometric Model for Biomass Estimation of Pinus roxburghii, Growing in Subtropical Pine Forests of Khyber Pakhtunkhwa, Pakistan
877
Development of an allometric model to estimate above-ground biomass of forests using MLPNN algorithm, case study: Hyrcanian forests of Iran
878
Development of an all-polymer, axial force electrochemical actuator
879
Development of an alternative culture medium for the selective enumeration of Lactobacillus casei in fermented milk Original Research Article
880
Development of an alternative laboratory method to determine thermal fragmentation of coal sources during pyrolysis in the gasification process
881
DEVELOPMENT OF AN ALTERNATIVE PROCESS TECHNOLOGY FOR FOAM INJECTION MOULDING WITH PHYSICAL BLOWING AGENTS
882
Development of an alternative setup for the estimation of microcarbon residue for heavy oil and fractions: Effects derived from air presence
883
Development of an alternative to magnetite for use as heavy media in coal washeries
884
Development of an alternative to the Olsen bicarbonate-extraction test for determining plant-available phosphorus in basaltic soils
885
Development of an alternative to the olsen test for determining corn plant-available phosphorus in calcareous soils
886
Development of an alternative, time and cost saving method of creating pseudoternary diagrams using the example of a microemulsion
887
Development of an aluminide coating layer on Alloy 617 by Al sputtering and inter-diffusion heat treatments
888
Development of an aluminum hull panel for high-speed craft
889
Development of an Aluminum-laminated Lithium-ion battery for Hybrid electric vehicle application
890
Development of an Alu-PCR Amplified YAC Probe Suitable for Enumeration of Chromosome 13 on Uncultured Lymphocytes and Amniocytes by Fluorescence in situ Hybridization
891
Development of an ambient temperature alkaline electrolyser for dynamic operation with renewable energy sources
892
Development of an aminocarboxylic acid-modified infrared chemical sensor for selective determination of copper ions in aqueous solutions Original Research Article
893
Development of an aminocarboxylic acid-modified infrared chemical sensor for selective determination of tyrosine in urine Original Research Article
894
Development of an ammonium ISFET sensor with a polymeric membrane including zeolite
895
Development of an amperometric assay for NH+4 based on a chemically modified screen-printed NADH sensor Original Research Article
896
Development of an amperometric biosensor based on glucose oxidase immobilized through silica sol–gel film onto Prussian Blue modified electrode
897
Development of an amperometric biosensor for glucose based on electrocatalytic reduction of hydrogen peroxide at the single-walled carbon nanotube/nile blue A nanocomposite modified electrode
898
Development of an amperometric enzyme electrode biosensor for sterigmatocystin detection
899
Development of an amperometric immunosensor based on flow injection analysis for the detection of red blood cells
900
Development of an amperometric indole-3-acetic acid sensor based on carbon nanotubes film coated glassy carbon electrode
901
Development of an amperometric L-ascorbic acid (Vitamin C) sensor based on electropolymerised aniline for pharmaceutical and food analysis
902
Development of an amperometric l-ascorbic acid (Vitamin C) sensor based on electropolymerised aniline for pharmaceutical and food analysis Original Research Article
903
Development of an amperometric l-lactate biosensor based on l-lactate oxidase immobilized through silica sol–gel film on multi-walled carbon nanotubes/platinum nanoparticle modified glassy carbon electrode
904
Development of an amperometric sensor for phenol compounds using a Nafion® membrane doped with copper dipyridyl complex as a biomimetic catalyst
905
Development of an amperometric sulfite biosensor based on sulfite oxidase with cytochrome c, as electron acceptor, and a screen-printed transducer
906
Development of an amperometric, screen-printed, single-enzyme phosphate ion biosensor and its application to the analysis of biomedical and environmental samples
907
Development of an amphiphilic resin-dispersion of nanopalladium catalyst: Design, preparation, and its use in aquacatalytic hydrodechlorination and aerobic oxidation
908
Development of an Anaglyph Anatomical Atlas of Rabbit as a New Generation of Printable 3D Anatomical Atlases
909
Development of an analog LSI for readout of X-ray CCDs
910
Development of an analog LSI for readout of X-ray CCDs
911
Development of an analogue optical link for the front-end read-out of the ATLAS electromagnetic calorimeter
912
Development of an analogue optical link for the front-end read-out of the ATLAS electromagnetic calorimeter
913
Development of an analysis support system for man-machine system design information
914
Development of an Analytic Model for Flux Switching Motors
915
Development of an analytical 3D-simulation model of the levelling process
916
Development of an analytical method and its quick algorithm to calculate the solar energy collected by a heliostat field in a year
917
Development of an Analytical Method for Dibutyl Phthalate Determination Using Surrogate Analyte Approach
918
Development of an analytical method for organotin compounds in fortified flour samples using microwave-assisted extraction and normal-phase HPLC with UV detection
919
Development of an analytical method for polycyclic aromatic hydrocarbons and their derivatives
920
Development of an analytical method for the determination of anthracyclines in hospital effluents
921
Development of an analytical method for the determination of arsenic in gasoline samples by hydride generation–graphite furnace atomic absorption spectrometry
922
Development of an analytical method for the determination of arsenic in gasoline samples by hydride generation–graphite furnace atomic absorption spectrometry
923
Development of an analytical method for the determination of tert-butylhydroquinone in soybean biodiesel
924
Development of an analytical method to break logical loops at the system level
925
Development of an analytical method to break logical loops at the system level
926
Development of an analytical method to confirm toxic trimethylated tin in human urine
927
Development of an analytical method to determine avermectins in water, sediments and soils using liquid chromatography–tandem mass spectrometry
928
Development of an analytical method to monitor industrial degreasing and rinsing baths
929
Development of an analytical method using microchip capillary electrophoresis for the measurement of fluorescein-labeled salivary components in response to exercise stress
930
Development of an analytical method using reversed-phase HPLC-PDA for a semipurified extract of Paullinia cupana var. sorbilis (guaranل)
931
Development of an analytical methodology for sarin (GB) and soman (GD) in various military-related wastes
932
Development of an analytical methodology for the determination of the antiparasitic drug toltrazuril and its two metabolites in surface water, soil and animal manure Original Research Article
933
Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC
934
Development of an analytical model for warm deep drawing of aluminum alloys
935
Development of an analytical model useful for micro heat engine analysis
936
Development of an analytical protocol for detecting antibiotic residues in various foods
937
Development of an analytical protocol for the determination of V (IV) and V (V) in seawater: Application to coastal environments
938
Development of an analytical protocol for the estimation of vitamin D2 in fortified toned milk
939
Development of an analytical reversed-phase high-performance liquid chromatography–electrospray ionization mass spectrometry method for characterization of recombinant antibodies
940
Development of an analytical technique for the detection of alteration minerals formed in bentonite by reaction with alkaline solutions
941
Development of an Android-Based Breast Cancer Risk Detector
942
Development of an Angiosperm Quality Assessment Index (AQuA-Index) for ecological quality evaluation of Portuguese water bodies—A multi-metric approach
943
Development of an anhydrotetracycline-inducible gene expression system for solvent-producing Clostridium acetobutylicum: A useful tool for strain engineering
944
Development of an ANN based system identification tool to estimate the performance-emission characteristics of a CRDI assisted CNG dual fuel diesel engine
945
Development of an annular denuder sampling system for the determination of lower aliphatic aldehydes and amines in stack gas.
946
Development of an anodic stripping voltammetric assay, using a disposable mercury-free screen-printed carbon electrode, for the determination of zinc in human sweat
947
Development of an antenna coil type sensor device for hydrogen leakage detection
948
Development of an anthraquinone process for the production of hydrogen peroxide in a trickle bed reactor—From bench scale to industrial scale
949
Development of an anthropogenic emissions processing system for Asia using SMOKE
950
Development of an anti-acne cream based on natural oils: Investigation of the effect of ingredients on rheology, texture properties, and physical stability
951
Development of an anti-angiogenic therapeutic model combining scAAV2-delivered siRNAs and noninvasive photoacoustic imaging of tumor vasculature development
952
Development of an antibacterial copper (II)-chelated polyacrylonitrile ultrafiltration membrane
953
Development of an Antibody-Based Assay for Determination of Baculovirus Titers in 10 Hours
954
Development of an anti-Compton veto for HPGe detectors operated in liquid argon using silicon photo-multipliers
955
Development of an anti-Compton veto for HPGe detectors operated in liquid argon using silicon photo-multipliers
956
Development of an antigen-presenting cell-targeted DNA vaccine against melanoma by mannosylated liposomes
957
Development of an antimicrobial microporous polyurethane membrane
958
Development of an antimicrobial resin—A pilot study
959
Development of an antimicrobial sachet containing encapsulated allyl isothiocyanate to inactivate Escherichia coli O157:H7 on spinach leaves
960
Development of an anti-porcine CD34 monoclonal antibody that identifies hematopoietic stem cells
961
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
962
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
963
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
964
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
965
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
966
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
967
Development of an Anxiety Management Package for Mothers with Children Preparing for University Entrance Exams
968
Development of an apertureless near-field optical microscope for fluorescence imaging and spectroscopy
969
Development of an apparatus for seaborgium studies by high temperature gas chromatography
970
Development of an apparatus for seaborgium studies by high temperature gas chromatography
971
Development of an Apparatus for the Determination of Spectral Reflectivity at High Temperatures in the Visible
972
Development of an application for creation and learning of neural networks to utilize in environmental sciences
973
Development of an application specific scintimammography detector based on a crystal scintillator array and a PSPMT
974
Development of an application specific scintimammography detector based on a crystal scintillator array and a PSPMT
975
Development of an applied roll forming pass design expert system based on the shape element idea
976
Development of an Approach for Disambiguating Ambiguous Hindi postposition
977
Development of an approach for generation of temporally complete daily nadir MODIS reflectance time series
978
Development of an approach to automatic language identification based on phone recognition
979
Development of an approach to estimating mid- to long-term critical loads for radiocaesium contamination of cow milk in western Europe
980
Development of an approach to the synthesis of the plakortones
981
Development of an appropriate model for the optional lane-changing rate in weaving segments with short lengths
982
Development of an Appropriate Model in the Preparation of Knowledge Management Software in Iran
983
Development of an appropriate procedure for estimation of RUSLE EI30 index and preparation of erosivity maps for Pulau Penang in Peninsular Malaysia
984
Development of an approximate empirical-CFD model estimating coupled heat and water transfers of stacked food products placed in airflow Original Research Article
985
Development of an aptasensor for electrochemical detection of tetracycline
986
Development of an aqueous two-phase partitioning system for fractionating therapeutic proteins from tobacco extract
987
Development of an Arabidopsis thaliana-based bioassay for investigating seed colonization by mycotoxigenic Aspergillus species
988
Development of an arCagA Antigen-Based Assay for the Detection of Helicobacter pylori in Stool Specimens
989
Development of an Arcellacea (testate lobose amoebae) based transfer function for sedimentary Phosphorus in lakes
990
Development of an arginine-based cationic hydrogel platform: Synthesis, characterization and biomedical applications
991
Development of an aromatic triamine-based flame-retardant benzoxazine and its high-performance copolybenzoxazines
992
Development of an array of calorimetric low-temperature detectors for heavy ion physics
993
Development of an array of calorimetric low-temperature detectors for heavy ion physics
994
Development of an array of polymer/MnO2/Fe2O3 mixtures for use in gas sensing applications
995
Development of an array of transition edge sensors for application in X-ray astronomy
996
Development of an array of transition edge sensors for application in X-ray astronomy
997
Development of an artificial insemination protocol in llamas using cooled semen
998
Development of an artificial intelligence program for flexible neuropsychological test selection
999
Development of An Artificial Male Germ Cell Niche Using Electrospun Poly Vinyl Alcohol/Human Serum Albumin/Gelatin Fibers
1000
Development of an artificial market model based on a field study
