بر اساس عنوان

1
Development of an amperometric biosensor based on glucose oxidase immobilized through silica sol–gel film onto Prussian Blue modified electrode
2
Development of an amperometric biosensor for glucose based on electrocatalytic reduction of hydrogen peroxide at the single-walled carbon nanotube/nile blue A nanocomposite modified electrode
3
Development of an amperometric enzyme electrode biosensor for sterigmatocystin detection
4
Development of an amperometric immunosensor based on flow injection analysis for the detection of red blood cells
5
Development of an amperometric indole-3-acetic acid sensor based on carbon nanotubes film coated glassy carbon electrode
6
Development of an amperometric L-ascorbic acid (Vitamin C) sensor based on electropolymerised aniline for pharmaceutical and food analysis
7
Development of an amperometric l-ascorbic acid (Vitamin C) sensor based on electropolymerised aniline for pharmaceutical and food analysis Original Research Article
8
Development of an amperometric l-lactate biosensor based on l-lactate oxidase immobilized through silica sol–gel film on multi-walled carbon nanotubes/platinum nanoparticle modified glassy carbon electrode
9
Development of an amperometric sensor for phenol compounds using a Nafion® membrane doped with copper dipyridyl complex as a biomimetic catalyst
10
Development of an amperometric sulfite biosensor based on sulfite oxidase with cytochrome c, as electron acceptor, and a screen-printed transducer
11
Development of an amperometric, screen-printed, single-enzyme phosphate ion biosensor and its application to the analysis of biomedical and environmental samples
12
Development of an amphiphilic resin-dispersion of nanopalladium catalyst: Design, preparation, and its use in aquacatalytic hydrodechlorination and aerobic oxidation
13
Development of an Anaglyph Anatomical Atlas of Rabbit as a New Generation of Printable 3D Anatomical Atlases
14
Development of an analog LSI for readout of X-ray CCDs
15
Development of an analog LSI for readout of X-ray CCDs
16
Development of an analogue optical link for the front-end read-out of the ATLAS electromagnetic calorimeter
17
Development of an analogue optical link for the front-end read-out of the ATLAS electromagnetic calorimeter
18
Development of an analysis support system for man-machine system design information
19
Development of an Analytic Model for Flux Switching Motors
20
Development of an analytical 3D-simulation model of the levelling process
21
Development of an analytical method and its quick algorithm to calculate the solar energy collected by a heliostat field in a year
22
Development of an Analytical Method for Dibutyl Phthalate Determination Using Surrogate Analyte Approach
23
Development of an analytical method for organotin compounds in fortified flour samples using microwave-assisted extraction and normal-phase HPLC with UV detection
24
Development of an analytical method for polycyclic aromatic hydrocarbons and their derivatives
25
Development of an analytical method for the determination of anthracyclines in hospital effluents
26
Development of an analytical method for the determination of arsenic in gasoline samples by hydride generation–graphite furnace atomic absorption spectrometry
27
Development of an analytical method for the determination of arsenic in gasoline samples by hydride generation–graphite furnace atomic absorption spectrometry
28
Development of an analytical method for the determination of tert-butylhydroquinone in soybean biodiesel
29
Development of an analytical method to break logical loops at the system level
30
Development of an analytical method to break logical loops at the system level
31
Development of an analytical method to confirm toxic trimethylated tin in human urine
32
Development of an analytical method to determine avermectins in water, sediments and soils using liquid chromatography–tandem mass spectrometry
33
Development of an analytical method to monitor industrial degreasing and rinsing baths
34
Development of an analytical method using microchip capillary electrophoresis for the measurement of fluorescein-labeled salivary components in response to exercise stress
35
Development of an analytical method using reversed-phase HPLC-PDA for a semipurified extract of Paullinia cupana var. sorbilis (guaranل)
36
Development of an analytical methodology for sarin (GB) and soman (GD) in various military-related wastes
37
Development of an analytical methodology for the determination of the antiparasitic drug toltrazuril and its two metabolites in surface water, soil and animal manure Original Research Article
38
Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC
39
Development of an analytical model for warm deep drawing of aluminum alloys
40
Development of an analytical model useful for micro heat engine analysis
41
Development of an analytical protocol for detecting antibiotic residues in various foods
42
Development of an analytical protocol for the determination of V (IV) and V (V) in seawater: Application to coastal environments
43
Development of an analytical protocol for the estimation of vitamin D2 in fortified toned milk
44
Development of an analytical reversed-phase high-performance liquid chromatography–electrospray ionization mass spectrometry method for characterization of recombinant antibodies
45
Development of an analytical technique for the detection of alteration minerals formed in bentonite by reaction with alkaline solutions
46
Development of an Android-Based Breast Cancer Risk Detector
47
Development of an Angiosperm Quality Assessment Index (AQuA-Index) for ecological quality evaluation of Portuguese water bodies—A multi-metric approach
48
Development of an anhydrotetracycline-inducible gene expression system for solvent-producing Clostridium acetobutylicum: A useful tool for strain engineering
49
Development of an ANN based system identification tool to estimate the performance-emission characteristics of a CRDI assisted CNG dual fuel diesel engine
50
Development of an annular denuder sampling system for the determination of lower aliphatic aldehydes and amines in stack gas.
51
Development of an anodic stripping voltammetric assay, using a disposable mercury-free screen-printed carbon electrode, for the determination of zinc in human sweat
52
Development of an antenna coil type sensor device for hydrogen leakage detection
53
Development of an anthraquinone process for the production of hydrogen peroxide in a trickle bed reactor—From bench scale to industrial scale
54
Development of an anthropogenic emissions processing system for Asia using SMOKE
55
Development of an anti-acne cream based on natural oils: Investigation of the effect of ingredients on rheology, texture properties, and physical stability
56
Development of an anti-angiogenic therapeutic model combining scAAV2-delivered siRNAs and noninvasive photoacoustic imaging of tumor vasculature development
57
Development of an antibacterial copper (II)-chelated polyacrylonitrile ultrafiltration membrane
58
Development of an Antibody-Based Assay for Determination of Baculovirus Titers in 10 Hours
59
Development of an anti-Compton veto for HPGe detectors operated in liquid argon using silicon photo-multipliers
60
Development of an anti-Compton veto for HPGe detectors operated in liquid argon using silicon photo-multipliers
61
Development of an antigen-presenting cell-targeted DNA vaccine against melanoma by mannosylated liposomes
62
Development of an antimicrobial microporous polyurethane membrane
63
Development of an antimicrobial resin—A pilot study
64
Development of an antimicrobial sachet containing encapsulated allyl isothiocyanate to inactivate Escherichia coli O157:H7 on spinach leaves
65
Development of an anti-porcine CD34 monoclonal antibody that identifies hematopoietic stem cells
66
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
67
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
68
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
69
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
70
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
71
Development of an anti-tick vaccine to protect cattle against tick-borne transmission of Theileria parva
72
Development of an Anxiety Management Package for Mothers with Children Preparing for University Entrance Exams
73
Development of an apertureless near-field optical microscope for fluorescence imaging and spectroscopy
74
Development of an apparatus for seaborgium studies by high temperature gas chromatography
75
Development of an apparatus for seaborgium studies by high temperature gas chromatography
76
Development of an Apparatus for the Determination of Spectral Reflectivity at High Temperatures in the Visible
77
Development of an application for creation and learning of neural networks to utilize in environmental sciences
78
Development of an application specific scintimammography detector based on a crystal scintillator array and a PSPMT
79
Development of an application specific scintimammography detector based on a crystal scintillator array and a PSPMT
80
Development of an applied roll forming pass design expert system based on the shape element idea
81
Development of an Approach for Disambiguating Ambiguous Hindi postposition
82
Development of an approach for generation of temporally complete daily nadir MODIS reflectance time series
83
Development of an approach to automatic language identification based on phone recognition
84
Development of an approach to estimating mid- to long-term critical loads for radiocaesium contamination of cow milk in western Europe
85
Development of an approach to the synthesis of the plakortones
86
Development of an appropriate model for the optional lane-changing rate in weaving segments with short lengths
87
Development of an Appropriate Model in the Preparation of Knowledge Management Software in Iran
88
Development of an appropriate procedure for estimation of RUSLE EI30 index and preparation of erosivity maps for Pulau Penang in Peninsular Malaysia
89
Development of an approximate empirical-CFD model estimating coupled heat and water transfers of stacked food products placed in airflow Original Research Article
90
Development of an aptasensor for electrochemical detection of tetracycline
91
Development of an aqueous two-phase partitioning system for fractionating therapeutic proteins from tobacco extract
92
Development of an Arabidopsis thaliana-based bioassay for investigating seed colonization by mycotoxigenic Aspergillus species
93
Development of an arCagA Antigen-Based Assay for the Detection of Helicobacter pylori in Stool Specimens
94
Development of an Arcellacea (testate lobose amoebae) based transfer function for sedimentary Phosphorus in lakes
95
Development of an arginine-based cationic hydrogel platform: Synthesis, characterization and biomedical applications
96
Development of an aromatic triamine-based flame-retardant benzoxazine and its high-performance copolybenzoxazines
97
Development of an array of calorimetric low-temperature detectors for heavy ion physics
98
Development of an array of calorimetric low-temperature detectors for heavy ion physics
99
Development of an array of polymer/MnO2/Fe2O3 mixtures for use in gas sensing applications
100
Development of an array of transition edge sensors for application in X-ray astronomy
101
Development of an array of transition edge sensors for application in X-ray astronomy
102
Development of an artificial insemination protocol in llamas using cooled semen
103
Development of an artificial intelligence program for flexible neuropsychological test selection
104
Development of An Artificial Male Germ Cell Niche Using Electrospun Poly Vinyl Alcohol/Human Serum Albumin/Gelatin Fibers
105
Development of an artificial market model based on a field study
106
Development of an artificial neural network correlation for prediction of overall gas holdup in bubble column reactors
107
Development of an artificial neural network model based thermal control logic for double skin envelopes in winter
108
Development of an artificial neural network model for adsorption and photocatalysis of reactive dye on TiO2 surface
109
Development of An Artificial Neural Network Model for Asphalt Pavement Deterioration Using LTPP Data
110
Development of an artificial neural network model for determination of longitudinal and transverse dispersivities in a convergent flow tracer test
111
Development of an artificial neural network model for predicting minimum miscibility pressure in CO2 flooding
112
Development of an artificial neural network model for the prediction of hydrocarbon density at high-pressure, high-temperature conditions
113
Development of an artificial neural network model for the steam process of a coal biomass cofired combined heat and power (CHP) plant in Sweden
114
Development of an Artificial Neural Network Model to Calculate Static Young’s Modulus Based on a Log-derived Data Base
115
Development of an artificial neural network-based software for prediction of power plant canal water discharge temperature
116
Development of an artificial vertebral body using a novel biomaterial, hydroxyapatite/collagen composite
117
Development of an ash particle deposition model considering build-up and removal mechanisms
118
Development of an ASIC for Si/CdTe detectors in a radioactive substance visualizing system
119
Development of an ASIC for Si/CdTe detectors in a radioactive substance visualizing system
120
Development of an Aspergillus oryzae whole-cell biocatalyst coexpressing triglyceride and partial glyceride lipases for biodiesel production
121
Development of an assay for rapid identification of meat from yak and cattle using polymerase chain reaction technique
122
Development of an assay for testing the antimicrobial activity of skin peptides against the amphibian chytrid fungus (Batrachochytrium dendrobatidis) using Xenopus laevis
123
Development of an Assay for Urinary Free Cortisol Determination on the Technicon Immuno 1® System
124
Development of an assay method for the detection and quantification of protease and non-nucleoside reverse transcriptase inhibitors in plasma and in peripherical blood mononuclear cells by liquid chromatography coupled with ultraviolet or tandem mass spec
125
Development of an Assessment Model for Evaluating the Performance of Nursing Services
126
Development of an at-line method for the identification of angiotensin-I inhibiting peptides in protein hydrolysates
127
Development of an atmospheric Cherenkov imaging camera for the CANGAROO-III experiment
128
Development of an atmospheric Cherenkov imaging camera for the CANGAROO-III experiment
129
Development of an attachment-informed measure of sexual behavior in late adolescence
130
Development of an attitude control system for a balloon-borne gamma ray telescope Original Research Article
131
Development of an Auditory-Perceptual Rating Instrument for the Operatic Singing Voice
132
Development of an austenitic structural steel
133
Development of an Australian Health Locus of Control scale
134
Development of an Austrian Carotenoid Database
135
Development of an autofluorescent organophosphates-degrading Stenotrophomonas sp. with dehalogenase activity for the biodegradation of hexachlorocyclohexane (HCH)
136
Development of an autoignition submodel for natural gas engines☆
137
Development of an automated cloud water collection system for use in atmospheric monitoring networks
138
Development of an automated controlled-pore glass flow-through immunosensor for carbaryl
139
Development of an automated electroplater and dosimetry system for the electrodeposition and quality control of radioactive stents
140
Development of an automated flow-based electrochemical aptasensor for on-line detection of Ochratoxin A
141
Development of an automated fuzzy-logic-based expert system for unmanned landing
142
Development of an automated immunoassay for advanced glycosylation end products in human serum
143
Development of an Automated Immunoturbidimetric Ferritin Assay
144
Development of an automated machine for PHC pile head grinding and crushing work
145
Development of an automated method for in situ measurement of the geometrical properties of the ITER bolometer diagnostic
146
Development of an automated method for mapping fire history captured in Landsat TM and ETM + time series across Queensland, Australia
147
Development of an Automated Method for Simultaneous Determination of Low Molecular Weight Aliphatic Amines and Ammonia in Ambient Air by Diffusion Scrubber Coupled to Ion Chromatography
148
Development of an automated microreaction system with integrated sensorics for process screening and production
149
Development of an Automated Microspotting System for Rapid Dielectrophoretic Fabrication of Bundled Carbon Nanotube Sensors
150
Development of an automated multisample scanning system for nuclear track etched detectors
151
Development of an automated multisample scanning system for nuclear track etched detectors
152
Development of an automated obstacle detector for blind people
153
Development of an automated on-line analysis system using flow injection, ultrasound filtration and CCD detection
154
Development of an automated on-line electrochemical chlorite ion sensor
155
Development of an automated on-line pepsin digestion–liquid chromatography–tandem mass spectrometry configuration for the rapid analysis of protein adducts of chemical warfare agents
156
Development of an automated on-line pre-column derivatization procedure for sensitive determination of histamine in food with high-performance liquid chromatography–fluorescence detection
157
Development of an automated on-line solid-phase extraction–high-performance liquid chromatographic method for the analysis of aniline, phenol, caffeine and various selected substituted aniline and phenol compounds in aqueous matrices
158
Development of an automated phase behaviour measurement system for lean hydrocarbon fluid mixtures, using re-entrant rf/microwave resonant cavities
159
Development of an automated procedure for estimation of the spatial variation of runoff in large river basins
160
Development of an automated region-of-interest-setting method based on a deep neural network for brain perfusion single photon emission computed tomography quantification methods
161
Development of an automated sequential injection on-line solvent extraction-back extraction procedure as demonstrated for the determination of cadmium with detection by electrothermal atomic absorption spectrometry Original Research Article
162
Development of an automated synthesis apparatus for image-[3-11C] labeled aromatic amino acids
163
Development of an automated system for fuel reload patterns design
164
Development of an automated system for fuel reload patterns design
165
Development of an automated system for fuel reload patterns design Original Research Article
166
Development of an automated system for synthesizing 18F-labeled compounds using [18F]fluoroethyl bromide as a synthetic precursor
167
Development of an automated system for the quick production of 13N-labeled compounds with high specific activity using anhydrous [13N]NH3
168
Development Of An Automated Tool For Detecting Errors In Tenses
169
Development of an automatic and mobile X-ray robot: An innovative approach to medical imaging through mechatronics
170
Development of an automatic blowing-snow station
171
Development of an automatic chamber system for long-term measurements of CO2 flux from roots
172
Development of an automatic characterisation system for silicon detectors
173
Development of an automatic characterisation system for silicon detectors
174
Development of an automatic continuous analyzer for water-soluble gases in air by combining an artificial lung with an ion chromatograph
175
Development of an automatic customer service system on the internet
176
Development of an automatic high-throughput assay for tetracycline determination by using Eu2O3 nanoparticles and dry-reagent technology
177
Development of an Automatic Land Use Extraction System in Urban Areas using VHR Aerial Imagery and GIS Vector Data
178
Development of an Automatic Mold Polishing System
179
Development of an automatic multi-channel ink-jet ejection chemiluminescence system and its application to the determination of horseradish peroxidase Original Research Article
180
Development of an automatic multiple dynamic hollow fibre liquid-phase microextraction procedure for specific migration analysis of new active food packagings containing essential oils
181
Development of an Automatic Pallet Handling System for Seeded Trays
182
Development of an automatic rice-quality inspection system
183
Development of an Automatic Rolling System for Rice Seedlings
184
Development of an automatic sample changer for iMATERIA
185
Development of an automatic sample changer for iMATERIA
186
Development of an automatic self balancing control system for a tree climbing robot
187
Development of an automatic solid phase extraction and liquid chromatography mass spectrometry method by using a monolithic column for the analysis of Cyclosporin A in human plasma
188
Development of an automatic subsea blowout preventer stack control system using PLC based SCADA
189
Development of an automatic torque test to measure the shear bond strength between asphalt
190
Development of an Automation and Control Design System for Lowland Tropical Greenhouses
191
Development of an automation system to evaluate the three-dimensional oxygen distribution in wastewater biofilms using microsensors
192
Development of an autonomous detector for sensing of nerve agents based on functionalized silicon nanowire field-effect transistors
193
Development of an autonomous navigation system for an outdoor vehicle
194
Development of an Autonomous Navigation System using a Two-dimensional Laser Scanner in an Orchard Application
195
Development of an autonomous, wireless pH and temperature sensing system for monitoring pig meat quality
196
Development of an autonomous, wireless pH and temperature sensing system for monitoring pig meat quality
197
Development of an AutoWEP distributed hydrological model and its application to the upstream catchment of the Miyun Reservoir
198
Development of an avian influenza virus inactivation evaluation method using dialysis cassette in animal manure and mortality disposal systems
199
Development of an avian model for restenosis Original Research Article
200
Development of an axisymmetric wave packet in rotating-disk flow
201
Development of an EAM potential for simulation of radiation damage in Fe–Cr alloys
202
Development of an early intervention to prevent long-term incapacity for work: using an online RAND/UCLA appropriateness method to obtain the views of general practitioners
203
Development of an early warning system for a broiler house using computer vision
204
Development of an earthquake loss model for Turkish catastrophe insurance
205
Development of an Easy-to-Use Tool for the Assessment of Emergency Department Physical Design
206
Development of an eco-friendly agar extraction technique from the red seaweed Gracilaria lemaneiformis
207
Development of an Eco-Friendly Method for Iron Extraction and Determination in Pharmaceuticals Using Ciprofloxacin Drug as Chelating agent
208
Development of an eco-friendly optical sensor element based on tetraphenylporphyrin derivatives dispersed in biodegradable polymer: Effects of substituents of tetraphenylporphyrins on HCl detection and biodegradation
209
Development of an eco-ideation tool to identify stepwise greenhouse gas emissions reduction options for consumer goods
210
Development of an ecological mapping methodology for urban areas in New Zealand
211
Development of an ecological security evaluation method based on the ecological footprint and application to a typical steppe region in China
212
Development of an E-Commerce Chatbot for a University Shopping Mall
213
Development of an economical model to determine an appropriate feed-in tariff for grid-connected solar PV electricity in all states of Australia
214
Development of an e-Diagnostics/Maintenance framework for semiconductor factories with security considerations
215
Development of an edible coating based on chitosan-glycerol to delay ‘Berangan’ banana (Musa sapientum cv. Berangan) ripening process
216
Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner
217
Development of an Educational Model in Stimulating the Growth and Development of Children Aged 2-5 Years: Dick and Carey s Intervention Design
218
Development of an Educational Model of Emotional Regulation Based on Gross Emotional Regulation (ERT), Emotional Schema Therapy (EST), and Emotional Transformation Therapy (ETT) and its Effectiveness in Internet Addiction with Different Roles of Brain/ Behavioral Systems
219
Development of an Educational Software for Diagnosis in Oral Medicine and Evaluation of Dental Students’ Attitudes: An Educational Intervention
220
Development of an effective acidogenically digested swine manure-based algal system for improved wastewater treatment and biofuel and feed production
221
Development of an effective and practical Process Alteration Index (PAI) for predicting metallurgical responses of Cu porphyries
222
Development of an effective data-driven model for hourly typhoon rainfall forecasting
223
Development of an effective Edwardsiella tarda vaccine for cultured turbot (Scophthalmus maximus)
224
DEVELOPMENT OF AN EFFECTIVE ENERGY MANAGEMENT SYSTEM IN POWER PLANTS OF PAKISTAN
225
Development of an Effective Rent (Lease) Index for the Chicago CBD
226
Development of an effective sample preparation approach for proteomic analysis of silkworm eggs using two-dimensional gel electrophoresis and mass spectrometry
227
Development of an effective screening method for partial resistance to Alternaria brassicicola (dark leaf spot) in Brassica rapa
228
Development of an effective single-electron model of the electronic structure of hydronium and hydronium–water clusters
229
Development of an efficient aerodynamic shape optimization framework Original Research Article
230
Development of an efficient and low-cost protocol for the manual PNA synthesis by Fmoc chemistry
231
Development of an efficient and selective radioligand for bradykinin B1 receptor occupancy studies
232
Development of an Efficient and Sensitive Magnetic Dispersive Solid-phase Extraction Technique for Preconcentration of Amphetamine and Methamphetamine Determined by High-performance Liquid Chromatography and Liquid Chromatography-Tandem Mass Spectrometry in Sports Supplements
233
Development of an Efficient Approach for Reliability Analysis Using the Comparative Study of Several Static and Dynamic Methods; Case Study of an Unmanned Aerial Vehicle
234
Development of an efficient bioprocess for turanose production by sucrose isomerisation reaction of amylosucrase
235
Development of an efficient catalyst from magnetite ore: Characterization and catalytic potential in the ozonation of water toxic contaminants Original Research Article
236
Development of an efficient coherent optical source at 6.04 μm
237
Development of an Efficient Connector System for Fiber Reinforced Polymer Bridge Decks to Steel Girders
238
Development of an efficient grain refiner for Al–7Si alloy
239
Development of an efficient grain refiner for Al–7Si alloy
240
Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium
241
Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium
242
Development of an Efficient Hybrid Method for Motif Discovery in DNA Sequences
243
Development of an efficient hybrid model for range sidelobe suppression in pulse compression radar
244
Development of an efficient liquid-phase peptide synthesis protocol using a novel fluorene-derived anchor support compound with Fmoc chemistry; AJIPHASE®
245
Development of an efficient method for preparation of 1,3,5-trihydroxyisocyanuric acid (THICA) and its use as aerobic oxidation catalyst
246
Development of an efficient neural-based segmentation technique for Arabic handwriting recognition
247
Development of an efficient pretreatment process for enzymatic saccharification of Eastern redcedar
248
Development of an efficient process for the treatment of residual sludge discharged from an anaerobic digester in a sewage treatment plant
249
Development of an efficient protein phosphatase-based colorimetric test for okadaic acid detection Original Research Article
250
Development of an efficient scanning and purging magnet system for IMRT with narrow high energy photon beams
251
Development of an efficient scanning and purging magnet system for IMRT with narrow high energy photon beams
252
Development of an efficient simulation tool for multiproduct batch plant design
253
Development of an efficient Tissue Culture after Crossing (TCC) system for transgenic improvement of barley as a bioenergy crop
254
DEVELOPMENT OF AN EFFICIENT T-TYPE STRAINER WITH ITS PERFORMANCE EVALUATION
255
Development of an ejector cooling system with thermal pumping effect
256
Development of an electric field sensor based on second harmonic generation with electro-optic materials
257
DEVELOPMENT OF AN ELECTRIC SPRAYER FOR GREENHOUSE AND SMALL OPEN FIELD
258
Development of an electrical model for a PV/battery system for performance prediction
259
Development of an electrical tomographic system for operation in a remote, acidic and radioactive environment
260
Development of an electrochemical cell for the removal of Reactive Black 5 Original Research Article
261
Development of an electrochemical flow injection immunoassay (FIIA) for the real-time monitoring of biospecific interactions Original Research Article
262
Development of an Electrochemical Immunosensor for Direct Detection of Interferon-gamma at the Attomolar Level
263
Development of an electrochemical membrane-based nanobiosensor for ultrasensitive detection of dengue virus Original Research Article
264
Development of an electrochemical sensor based on nanostructured hausmannite-type manganese oxide for detection of sodium ions
265
Development of an Electrochemical Sensor for a Sensitive Determination of Metanil Yellow
266
Development of an electrochemical sensor for determination of dissolved oxygen by nickel–salen polymeric film modified electrode
267
Development of an electrochemical sulfite biosensor by immobilization of sulfite oxidase on conducting polyaniline film
268
Development of an electrochemically reduced graphene oxide modified disposable bismuth film electrode and its application for stripping analysis of heavy metals in milk
269
Development of an electrode for lead-acid batteries possessing a high electrochemical utilization factor and invariable cycling characteristics
270
Development of an electrodeionization process for removal of nitrate from drinking water Part 1: Single-species testing Original Research Article
271
Development of an electrodeionization process for removal of nitrate from drinking water Part 2: Multi-species testing Original Research Article
272
Development of an electromachining method for machining curved holes
273
Development of an electromagnetic fields risk communication plan
274
Development of an electromagnetic micro-generator
275
Development of an electromagnetic phase shifter using a pair of cut-core coils for a cross undulator
276
Development of an electromagnetic phase shifter using a pair of cut-core coils for a cross undulator
277
Development of an electron microprobe method for the determination of phosphorus and associated elements in sediments
278
Development of an electron optics simulator to consider the 3-D magnetic deflection field in CRTs
279
Development of an electronic board for a neutrino telescope project
280
Development of an electronic board for a neutrino telescope project
281
Development of an Electronic Information System for the Management of Laboratory Data of Tuberculosis and Atypical Mycobacteria at the Pasteur Institute in Côte d’Ivoire
282
Development of an electronic nose for fire detection
283
Development of an electronic nose for fire detection
284
Development of an electronic nose to identify and quantify volatile hazardous compounds
285
Development of an Electron-Tracking Compton Camera using CF4 gas at high pressure for improved detection efficiency
286
Development of an Electron-Tracking Compton Camera using CF4 gas at high pressure for improved detection efficiency
287
Development of an electro-optical system for small UAV
288
Development of an electroosmotic pump for high performance actuation
289
Development of an electroplating solution for codepositing Au–Sn alloys
290
Development of an electroplating solution for codepositing Au–Sn alloys
291
Development of an electrospray-63Ni-differential ion mobility spectrometer for the analysis of aqueous samples
292
Development of an electrospun nano-apatite/PCL composite membrane for GTR/GBR application
293
Development of an electrostatic beam focus lens equipped with electron suppression grids for a microwave ion source to inject high-current ion beams into a linac
294
Development of an electrostatic beam focus lens equipped with electron suppression grids for a microwave ion source to inject high-current ion beams into a linac
295
Development of an ELISA Based Method for the Detection of Pemphigus vulgaris Autoantibodies
296
Development of an ELISA for bovine IL-10
297
Development of an ELISA for bovine IL-10
298
Development of an ELISA for quantification of the antimicrobial peptide piscidin 4 and its application to assess stress in fish
299
Development of an ELISA for the detection of autoantibodies to BP230
300
Development of an ELISA procedure to study sorption of atrazine onto a sewage sludge-amended luvisol soil
301
Development of an ELISA sandwich assay for quantifying IFN-gamma in salmonids
302
Development of an ELISA screening test for nitroimidazoles in egg and chicken muscle Original Research Article
303
Development of an ELISA technique for the detection of Babesia ovis and serological survey of the parasite in Khouzestan province, southern Iran
304
Development of an ELISA Test for Detection of Anti FMD Virus Type A87/IRN Antibody Using Irradiated Antigen
305
Development of an ELISA to measure soluble CD163 in porcine biological fluids
306
Development of an ELISA to measure soluble CD163 in porcine biological fluids
307
Development of an ELISA to measure soluble CD163 in porcine biological fluids
308
Development of an ELISA to measure soluble CD163 in porcine biological fluids
309
Development of an ELISA to measure soluble CD163 in porcine biological fluids
310
Development of an ELISA to measure soluble CD163 in porcine biological fluids
311
Development of an ELISA to measure the humoral immune response of hybrid striped bass Morone chrysops*M. saxatilis to Streptococcus iniae
312
Development of an embeddable sensor to monitor the corrosion process of new and existing reinforced concrete structures
313
development of an embedded moisture sensing device for a distributive network to control irrigation using iot
314
Development of an embryo toxicity test with the pond snail Lymnaea stagnalis using the model substance tributyltin and common solvents Original Research Article
315
Development of an Emergency Department Trigger Tool
316
Development of an Emergency Department—Based Injury Surveillance System, , ,
317
Development of an emission factor for ammonia emissions from US swine farms based on field tests and application of a mass balance method
318
Development of an emission inventory system from transport in Greece
319
Development of an emission processing system for the Pearl River Delta Regional air quality modeling using the SMOKE model: Methodology and evaluation
320
Development of an emissions inventory model for mobile sources
321
Development of an emitter for industrial silicon solar cells using the doped oxide solid source diffusion technique
322
Development of an Emotional Divorce Model in Iranian Muslim Women Using Happiness, Religious Attitude, and Marital Satisfaction
323
Development of an emotional processing scale
324
Development of an empirical correlation for combustion durations in spark ignition engines
325
Development of an empirical dynamic model for a Nexa PEM fuel cell power module
326
Development of an Empirical Kinetics Model for Sono-Degradation of Malachite Green: Evaluation of Electrical Energy Per Order
327
Development of an empirical model for calculating sediment-transport capacity in shallow overland flows: Model calibration
328
Development of an empirical model for determining G*/sin δ in crumb rubber modified binders
329
Development of an empirical model to predict losses in eggplant (Solanum melongena L.) production caused by Verticillium wilt
330
Development of an empirical model to predict nitrogen dioxide concentrations from weather variables for sites across the UK
331
Development of an emulsion imaging system for cosmic-ray muon radiography to explore the internal structure of a volcano, Mt. Asama
332
Development of an emulsion imaging system for cosmic-ray muon radiography to explore the internal structure of a volcano, Mt. Asama
333
Development of an emulsion liquid membrane system for extraction of a neutral species
334
Development of an emulsion liquid membrane system for separation of acetic acid from succinic acid
335
Development of an encapsulated scintillating fiber detector as a 14-MeV neutron sensor
336
Development of an encapsulated scintillating fiber detector as a 14-MeV neutron sensor
337
Development of an Endcap DIRC for PANDA
338
Development of an Endcap DIRC for PANDA
339
Development of an end-game strategy towards apoptolidin: a sequential Suzuki coupling approach
340
Development of an energetic diagnosis method for the buildings: example of the Perugia University
341
Development of an energy boundary element formulation for computing high-frequency sound radiation from incoherent intensity boundary conditions
342
Development of an energy consumption monitoring procedure for machine tools
343
Development of an energy function reflecting the transfer conductances for direct stability analysis in power systems
344
Development of an energy management system for a naphtha reforming plant: A data mining approach
345
Development of an energy rating system for existing houses
346
Development of an energy selector system for laser-driven proton beam applications
347
Development of an energy selector system for laser-driven proton beam applications
348
Development of an energy-binned photon-counting detector for X-ray and gamma-ray imaging
349
Development of an energy-binned photon-counting detector for X-ray and gamma-ray imaging
350
Development of an engine control system using city gas and biogas fuel mixture
351
Development of an engine simulation program and its application to stratified charge SI engines
352
Development of an engine simulation program and its application to stratified charge SI engines
353
Development of an engineering model for nickel loading onto an iminodiacetic resin for resin-in-pulp applications: Part II — Evaluation of existing models and their extension into a hybrid correlation
354
Development of an engineering model for nickel loading onto an iminodiacetic resin for resin-in-pulp applications: Part III — Verification of hybrid correlation
355
Development of an engineering model for nickel loading onto an iminodiacetic resin for resin-in-pulp applications: Part I—Method development and discussion of rate limiting factors
356
Development of an engineering system for unburned carbon prediction
357
Development of an Enhanced Core Catcher for Improving In-Vessel Retention Margins
358
Development of an enhanced formulation for delivering sustained release of buprenorphine hydrochloride
359
Development of an Enhanced Gain Substrate Integrated Waveguide H-plane Horn Antenna Using Thin Substarte
360
Development of an enhanced MHD micromixer based on axial flow modulation
361
Development of an enrofloxacin immunosensor based on label-free electrochemical impedance spectroscopy
362
Development of an ensemble learning-based intelligent model for stock market forecasting
363
Development of an Ensemble Multi-stage Machine for Prediction of Breast Cancer Survivability
364
Development of an Ensemble Multi-stage Machine for Prediction of Breast Cancer Survivability
365
DEVELOPMENT OF AN ENTROPY- BASED FUZZY EUTROPHICATION INDEX FOR RESERVOIR WATER QUALITY EVALUATION
366
Development of an Environment and energy Geographical Information System (E-GIS) construction model to support environmentally friendly urban planning
367
Development of an Environmental Curriculum Model Based on Self- Management in High School: A Qualitative Study
368
Development of an environmental flows decision support system
369
Development of an environmental impact assessment evaluation model and its application: Taiwan case study
370
Development of an environmental virtual field laboratory
371
Development of an environmentally benign process for the production of fatty acid methyl esters
372
Development of an environmentally safe corrosion, scale, and microorganism inhibitor for open recirculating cooling systems
373
Development of an environmentally safe corrosion, scale, and microorganism inhibitor for open recirculating cooling systems
374
Development of an environmentally safe corrosion, scale, and microorganism inhibitor for open recirculating cooling systems
375
Development of an Environment-Friendly and Solvent-Free Synthetic Route for the Synthesis of 3,4-Dihydropyrimidin-2-(1H)-Ones/Thiones Using La(NO3)3.6H2O as an Efficient Catalyst
376
Development of an environment-friendly microextraction method for the determination of aliphatic and aromatic aldehydes in water Original Research Article
377
Development of an Enzymatic Detergent Treatment Protocol That Significantly Reduces Protease Resistant Prion Protein Load and Infectivity from Prion-Contaminated Surgical-Steel Monofilaments
378
Development of an enzymatic flow-injection chemiluminescence system for determining inorganic pyrophosphate ion
379
Development of an enzymatic flow-injection chemiluminescence system for determining inorganic pyrophosphate ion Original Research Article
380
Development of an enzymatic microreactor based on microencapsulated laccase with off-line capillary electrophoresis for measurement of oxidation reactions
381
Development of an enzyme immuno assay for the determination of porcine haptoglobin in various body fluids: testing the significance of meat juice measurements for quality monitoring programs
382
Development of an enzyme immuno assay for the determination of porcine haptoglobin in various body fluids: testing the significance of meat juice measurements for quality monitoring programs
383
Development of an enzyme immunoassay for linoleic acid diols in urine Original Research Article
384
Development of an enzyme immunoassay for the detection of plant growth regulator inabenfide in rice Original Research Article
385
Development of an enzyme linked receptor assay (ELRA) for estrogens and xenoestrogens Original Research Article
386
Development of an enzymeless biosensor for the determination of phenolic compounds Original Research Article
387
Development of an enzymeless electroanalytical method for the indirect detection of creatinine in urine samples
388
Development of an enzyme-linked immunoassay for carbamylated plasma albumin
389
Development of an enzyme-linked immunoassay for the detection of gentamicin in swine tissues
390
Development of an enzyme-linked immunosorbent assay (ELISA) for antitumor agent MKT 077
391
Development of an enzyme-linked immunosorbent assay (ELISA) for the herbicide trifluralin Original Research Article
392
Development of an enzyme-linked immunosorbent assay (ELISA) using highly-specific monoclonal antibodies against plumbagin Original Research Article
393
Development of an enzyme-linked immunosorbent assay (ELISA)-like fluorescence assay to investigate the interactions of glycosaminoglycans to cells Original Research Article
394
Development of an enzyme-linked immunosorbent assay based on anti-puerarin monoclonal antibody and its applications
395
Development of an enzyme-linked immunosorbent assay for 2,3-dinor-6-keto-prostagland in F1α in urine using a monoclonal antibody
396
Development of an enzyme-linked immunosorbent assay for 2,3-dinor-6-keto-prostagland in F1α in urine using a monoclonal antibody
397
Development of an enzyme-linked immunosorbent assay for benalaxyl and its application to the analysis of water and wine Original Research Article
398
Development of an Enzyme-Linked Immunosorbent Assay for Detection of the Gregarious Hymenopteran Parasitoid Muscidifurax raptorellus in House Fly Pupae
399
Development of an enzyme-linked immunosorbent assay for diniconazole in agricultural samples
400
Development of an enzyme-linked immunosorbent assay for equine neutrophil elastase measurement in blood: Preliminary application to colic cases
401
Development of an enzyme-linked immunosorbent assay for equine neutrophil elastase measurement in blood: Preliminary application to colic cases
402
Development of an enzyme-linked immunosorbent assay for pentachlorophenol Original Research Article
403
Development of an enzyme-linked immunosorbent assay for the detection of nitrofurantoin metabolite, 1-amino-hydantoin, in animal tissues
404
Development of an enzyme-linked immunosorbent assay for toosendanin Original Research Article
405
Development of an enzyme-linked immunosorbent assay, using a monoclonal antibody against (alpha)2-macroglobulin, for the diagnosis of systemic lupus erythematosus
406
Development of an enzyme-linked immunosorbent assay, using a monoclonal antibody against α2-macroglobulin, for the diagnosis of systemic lupus erythematosus
407
Development of an enzyme-linked immunosorbent assay, using a monoclonal antibody against α2-macroglobulin, for the diagnosis of systemic lupus erythematosus
408
Development of an EOS based on lattice cluster theory for pure components
409
Development of an epoxy-based monolith used for the affinity capturing of Eschericha coli bacteria
410
Development of an equation for calculating vertebral shear failure tolerance without destructive mechanical testing using iterative linear regression
411
Development of an equation of state for the square-well chain molecules of variable well width based on a modified coordination number model
412
DEVELOPMENT OF AN EQUIVALENCE RELATION AND A NEW DISADVANTAGE FACTOR APPLICABLE TO BOTH FAST AND THERMAL ENERGY REGIONS
413
Development of an equivalent circuit model of a fuel cell to evaluate the effects of inverter ripple current
414
Development of an equivalent force method and an application in simulating the radiated noise from an operating diesel engine
415
Development of an equivalent force method and an application in simulating the radiated noise from an operating diesel engine
416
Development of an equivalent-circuit model for the lithium/iodine battery
417
Development of an ergonomic evaluation facility for Indian tractors
418
Development of an ergonomics guideline for the furniture manufacturing industry
419
Development of an error-minimizing adaptive grid method Original Research Article
420
Development of an estimation model for the evaluation of the energy requirement of dilute acid pretreatments of biomass
421
Development of an estuarine multi-metric fish index and its application to Irish transitional waters
422
Development of an estuarine quality index based on key physical and biogeochemical features
423
Development of an ethanol model using social insects: V. Honeybee foraging decisions under the influence of alcohol
424
Development of an evapotranspiration index from Aqua/MODIS for monitoring surface moisture status
425
Development of an event-specific assay for the qualitative and quantitative detection of the genetically modified flax CDC Triffid (FP967)
426
Development of an Evidence-Based Policy for the Prevention of Ventilator Associated Pneumonia by Building on Existing Systems
427
Development of an Evidence-Based Progressive Web App to Promote Exercise Therapy and Telemonitoring for Individuals with Patello-Femoral Pain Syndrome: A Usability Study
428
Development of an evolutionary fuzzy expert system for estimating future behavior of stock price
429
Development of an ex vivo model of endovenous laser ablation of the great saphenous vein in a pilot study
430
Development of an exact dynamic stiffness matrix for free vibration analysis of a twisted Timoshenko beam
431
Development of an exergy-electrical analogy for visualizing and modeling building integrated energy systems
432
Development of an experimental facility for a liquid breeder in Korea
433
Development of an experimental facility for measuring pressure waves generated by high-speed trains
434
Development of an experimental glass ionomer cement containing niobium and fluoride
435
Development of an experimental loop heat pipe for application in future space missions
436
Development of an experimental procedure for energy evaluation of forest communities by calorimetry and thermal analysis
437
Development of an experimental prototype of an integrated thermal management controller for internal-combustion-engine-based cogeneration systems
438
Development of an experimental system for greywater reuse Original Research Article
439
Development of an experimental tool for measuring electrical properties of materials from liquid nitrogen temperature up to 1000°C
440
Development of an experimentally validated abrasive-grain cutting model using a hybrid Euler–Lagrange finite element formulation
441
Development of an expert multitask gadget controlled by voluntary eye movements
442
Development of an expert selection system to choose ideal cities for medical service ventures
443
Development of an expert system for evaluation of the strength of matrix shape memory composites
444
Development of an expert system for fault diagnosis in scooter engine platform using fuzzy-logic inference
445
Development of an expert system for tackling the publicʹs perception to climate-change impacts on petroleum industry
446
Development of an expert system for the determination of injection moulding parameters of thermoplastic materials: EX-PIMM
447
Development of an expert system for the evaluation of conventional and innovative technologies in the intermodal transport area
448
Development of an expert system for the process design of axisymmetric hot steel forging
449
Development of an expert system for turning and rotating tool selection in a dynamic environment
450
Development of an expert system for underbalanced drilling using fuzzy logic
451
Development of an expert system rulebase for the prospective identification of photoallergens
452
Development of an expert system to aid engineers in the selection of design for environment methods and tools
453
Development of an expert system to select materials for the main structure of a transfer crane designed for disabled people
454
Development of an expert tool using Principal Component Analysis (PCA) approach: for identifying human diseases , its severity
455
Development of an explicit algebraic turbulence model for buoyant flows – Part 1: DNS analysis
456
Development of an explicit Eulerian method for treating particle-laden turbulent flow in dust collectors
457
Development of an Extended Corresponding States Principle Method for Volumetric Property Predictions Based on a Lee–Kesler Reference Fluid
458
Development of an extended thermo-hydraulic simulation tool for fusion magnet design study – Application to the initial versions of JT-60SA TF coils layout Original Research Article
459
Development of an extensive database of mechanical and physical properties for reduced-activation martensitic steel F82H
460
Development of an external-type microinjection molding module for thermoplastic polymer
461
Development of an extraction and cleanup procedure for a liquid chromatographic–mass spectrometric method to analyze octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine in eggs
462
Development of an Extraction Method Based on a Zirconium-based Metal Organic Framework for the Detection and Determination of some Pesticides in Juice Samples Using GC-FID
463
Development of an extraction method for the determination of prostaglandins in biological tissue samples using liquid chromatography–tandem mass spectrometry: Application to gonads of Atlantic cod (Gadus morhua) Original Research Article
464
Development of an extraction method for the determination of zearalenone in corn using less organic solvents
465
Development of an extraction method for the determination of zearalenone in corn using less organic solvents
466
Development of an extreme ultraviolet imaging spectrometer for the BepiColombo mission Original Research Article
467
Development of an extremely flexible automatic analyzer with integrated biosensors for on-line control of fermentation processes
468
Development of an extremely thin grinding-tool for grinding microgrooves in optical glass
469
Development of an extrusion system for Bori and force characteristics of its batter during extrusion Original Research Article
470
Development of an extrusion system for producing fine-celled HDPE/wood-fiber composite foams using CO2 as a blowing agent
471
Development of an HAPD with 144 channels for the aerogel RICH of the Belle upgrade
472
Development of an HAPD with 144 channels for the aerogel RICH of the Belle upgrade
473
Development of an high resolution neutron spectroscopy system using a diamond detector and a remote digital acquisition methodology
474
Development of an HPLC fluorescence method for determination of boldine in plasma, bile and urine of rats and identification of its major metabolites by LC–MS/MS
475
Development of an HPLC method for monitoring of Photofrin II therapy
476
Development of an HPLC method for the determination of doripenem in human and mouse serum
477
Development of an HPLC method for the determination of mexiletine in human plasma and urine by solid-phase extraction
478
Development of an HPLC method for the determination of nifedipine in human plasma by solid-phase extraction
479
Development of an HPLC method with electrochemical detection of femtomoles of 8-oxo-7,8-dihydroguanine and 8-oxo-7,8-dihydro-2′-deoxyguanosine in the presence of uric acid
480
Development of an HPLC–MS procedure for the quantification of N-acetyl-S-(n-propyl)-l-cysteine, the major urinary metabolite of 1-bromopropane in human urine
481
Development of an HPLC–UV method for the simultaneous determination of tetracyclines in muscle and liver of porcine, chicken and bovine with accelerated solvent extraction
482
Development of an HPLC–UV/Vis method for the determination of dyes in a gasoline sample employing different pre-treatments
483
Development of an HPV Educational Protocol for Adolescents
484
Development of an HRTEM image analysis method to quantify carbon nanostructure
485
Development of an HS-SPME-GC method to determine the methyl anthranilate in Citrus honeys
486
Development of an ice container system for temporary space cooling
487
Development of an ICP-MS immunoassay for the detection of anti-erythropoietin antibodies
488
Development of an Idiotypic Network in Shape Space
489
Development of an IgG/IgY Sandwich-ELISA for the Detection of Cholera Toxin Subunit B
490
Development of an IL-6 Inhibitor Based on the Functional Analysis of Murine IL-6Rα1 Original Research Article
491
Development of an ILP model for optimal site selection and sizing of electric vehicle charging station using GA: a case study of Tehran
492
Development of an image analysis procedure for identifying protozoa and metazoa typical of activated sludge system
493
Development of an image based integrated method for determining and mapping aerosol optical thickness (AOT) over urban areas using the darkest pixel atmospheric correction method, RT equation and GIS: A case study of the Limassol area in Cyprus
494
Development of an image recognition system for RFX first wall maintenance
495
Development of an image-processing technique for soil tilth sensing
496
Development of an image-processing technique for soil tilth sensing
497
Development of an imaging microstrip gas chamber with a 5 cm × 5 cm area based on multi-chip module technology
498
Development of an imaging microstrip gas chamber with a 5 cm × 5 cm area based on multi-chip module technology
499
Development of an Imaging Time-of-Propagation (iTOP) prototype detector
500
Development of an Imaging Time-of-Propagation (iTOP) prototype detector
501
Development of an immersed boundary-phase field-lattice Boltzmann method for Neumann boundary condition to study contact line dynamics
502
Development of an immobilization and detection method of Enterobacter sakazakii from powdered infant formula Original Research Article
503
Development of an immobilization method by encapsulating inorganic metal salts forming hollow microcapsules
504
Development of an immobilized brain glutamine synthetase liquid chromatographic stationary phase for on-line biochemical studies
505
Development of an immobilized brain glutamine synthetase liquid chromatographic stationary phase for on-line biochemical studies
506
Development of an immobilized P-glycoprotein stationary phase for on-line liquid chromatographic determination of drug-binding affinities
507
Development of an immobilized-antigen immunofluorescence glass slide system that exploits fluorescent silica nanoparticles
508
Development of an immunoaffinity chromatography column for selective extraction of a new agonist phenylethylamine A from feed, meat and liver samples
509
Development of an immunoaffinity column method using broad-specificity monoclonal antibodies for simultaneous extraction and cleanup of quinolone and sulfonamide antibiotics in animal muscle tissues
510
Development of an Immunoaffinity Method for Purification of Streptokinase
511
Development of an immunoaffinity-based solid-phase extraction for diazinon
512
Development of an immunoaffinity-based solid-phase extraction for diazinon Original Research Article
513
Development of an immunoassay and a sol–gel-based immunoaffinity cleanup method for coplanar polychlorinated biphenyls from soil and sediment samples Original Research Article
514
Development of an immunoassay based on impedance measurements utilizing an antibody–nanosilver probe, silver enhancement, and electro-microchip
515
Development of an immunoassay for a quaternary ammonium compound, benzyldimethyldodecylammonium chloride
516
Development of an immunoassay for diagnosis of exposure to toxic organophosphorus compounds
517
Development of an immunoassay for larch arabinogalactan and its use in the detection of larch arabinogalactan in rat blood
518
Development of an immunoassay for rapid screening of vardenafil and its potential analogues in herbal products based on a group specific monoclonal antibody Original Research Article
519
Development of an immunoassay for terbutryn: Study of the influence of the immunization protocol
520
Development of an immunoassay for the measurement of skeletal troponin I using isoform-specific monoclonal antibodies
521
Development of an immunoassay to measure the humoral immune response of hybrid striped bass Morone chrysops×M. saxatilis
522
Development of an immunoassay to measure the humoral immune response of hybrid striped bass Morone chrysops×M. saxatilis
523
Development of an immunoblotting assay for serodiagnosis of Burkholderia mallei infection: the wholecell proteomebased paradigm
524
Development of an immunochromatographic assay for detection of aflatoxin B1 in foods
525
Development of an immunochromatographic assay for rapid and quantitative detection of clenbuterol in swine urine
526
Development of an immunochromatographic assay for the rapid detection of bromoxynil in water
527
Development of an immunochromatographic method to determine β-lactoglobulin at trace levels Original Research Article
528
Development of an immunochromatographic strip and its application in the simultaneous determination of Hg(II), Cd(II) and Pb(II)
529
Development of an immunochromatographic strip test for the rapid detection of deoxynivalenol in wheat and maize
530
Development of an immunochromatographic strip test for the rapid simultaneous detection of deoxynivalenol and zearalenone in wheat and maize
531
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
532
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
533
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
534
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
535
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
536
Development of an immunoenzimatic assay for detection of immunoglobulins specific against Corynebacterium pseudotuberculosis—Determination of a cut-off point employing different statistical methodologies
537
Development of an immunoenzymatic assay for the detection of human antibodies against Trypanosoma cruzi calreticulin, an immunodominant antigen
538
Development of an immunoenzyme test system for diagnosis if rabies
539
Development of an immunofluorescence technique for detecting Pfiesteria piscicida
540
Development of an immunofluorometric assay for human kallikrein 15 (KLK15) and identification of KLK15 in tissues and biological fluids
541
Development of an immuno-immobilized androgen receptor assay (IRA) and its application for the characterization of the receptor binding affinity of different pesticides
542
Development of an immunomagnetic bead-based time-resolved fluorescence immunoassay for rapid determination of levels of carcinoembryonic antigen in human serum Original Research Article
543
Development of an immunomagnetic separation method for efficient enrichment of Escherichia coli O157:H7
544
Development of an immunosensor based on the measurement of fluorescence
545
Development of an immunosensor for human ferritin, a nonspecific tumor marker, based on a quartz crystal microbalance Original Research Article
546
Development of an immunosensor for the detection of testosterone in bovine urine Original Research Article
547
Development of an immunosensor for the determination of allergy antibody (IgE) in blood samples
548
Development of an immunosensor for the determination of allergy antibody (IgE) in blood samples Original Research Article
549
Development of an immunosensor for the determination of rabbit IgG using streptavidin modified screen-printed carbon electrodes
550
Development of an impedance-based sensor for detection of catalyst coking in fuel reforming systems
551
Development of an impedimetric immunosensor based on electropolymerized polytyramine films for the direct detection of Salmonella typhimurium in pure cultures of type strains and inoculated real samples Original Research Article
552
Development of an impedimetric immunosensor for the determination of 3-amino-2-oxazolidone residue in food samples Original Research Article
553
Development of an Implantable Ventricular Assist System
554
Development of an implementation plan for a geographic information system: case of Lincoln County
555
Development of an implicit air pollution model for regions of variable topography
556
Development of an implicit least squares optimisation scheme for the determination of Kihara potential parameters using gas hydrate equilibrium data
557
DEVELOPMENT OF AN IMPLICIT NUMERICAL MODEL FOR CALCULATION OF SUB-AND SUPER-CRITICAL FLOWS
558
Development of an imprinted polymeric sensor with dual sensing property for trace level estimation of zinc and arginine
559
Development of an improved adhesive test method for composite assembly design
560
Development of an improved anaerobic filter for municipal wastewater treatment
561
Development of an improved analytical method for the determination of carcinogenic polycyclic aromatic hydrocarbons in transformer oil
562
Development of an Improved Chemical Model for the Estimation of CaSO4 Solubilities in the HCl-CaCl2-H2O System up to 100 °C
563
Development of an improved continuous hydrogenation process for the production of 1,3-propanediol using titania supported ruthenium catalysts Original Research Article
564
Development of an improved dry and wet deposition collector and the atmospheric deposition of PAHs onto Ulsan Bay, Korea
565
Development of an improved dynamic model of a Stirling engine and a performance analysis of a cogeneration plant
566
Development of an improved falling ball viscometer for high-pressure measurements with supercritical CO2
567
Development of an Improved Gas-Kinetic BGK Scheme for Inviscid and Viscous Flows
568
Development of an improved ground-based prototype of space plant-growing facility Original Research Article
569
Development of an improved heated interface for coupling solid-phase microextraction to high-performance liquid chromatography
570
Development of an improved heating system for industrial tunnel baking ovens Original Research Article
571
Development of an improved high resolution mass spectrometry based multi-residue method for veterinary drugs in various food matrices Original Research Article
572
Development of an improved LPCE column for the TLK facility with the help of the channeling stage model
573
Development of an improved method for the determination of polycyclic aromatic hydrocarbons in mainstream tobacco smoke
574
Development of an improved method for trace analysis of chloramphenicol using molecularly imprinted polymers
575
Development of an improved method of cultivation to obtain high biomass of the red alga Gelidiella acerosa (Gelidiales, Rhodophyta) in the open sea
576
Development of an improved method to extract pesticide residues in foods using acetontrile with magnesium sulfate and chloroform
577
Development of an improved method to perform single particle analysis by TIMS for nuclear safeguards Original Research Article
578
Development of an improved on-line chromatographic monitor with new methods for environmental and process control
579
Development of an improved optical transmission technique for black carbon (BC) analysis
580
Development of an improved PCR–ICT hybrid assay for direct detection of Legionellae and Legionella pneumophila from cooling tower water specimens
581
Development of an improved physical modelling of a forest area in a wind tunnel
582
Development of an improved positron emission particle tracking system
583
Development of an improved positron emission particle tracking system
584
Development of an improved procedure for extraction and quantitation of safranal in stigmas of Crocus sativus L. using high performance liquid chromatography
585
Development of an improved RNA interference vector system for Agrobacterium-mediated plant transformation
586
Development of an improved spatial reconstruction technique for the HLL method and its applications
587
Development of an Improved Sub-Molten Salt Method for Production of Potassium Titanate from Ilmenite
588
Development of an improved switched reluctance motor drive using a soft-switching converter
589
Development of an improved synthetic sludge: a possible surrogate for studying activated sludge dewatering characteristics
590
Development of an improved target for [18F]F2 production
591
Development of an improved tube galvanizing process by prior metallic coating
592
Development of an improved voltage and current measurement system for studying spark characteristics with application to electrodischarge machining
593
Development of an in situ ITER dust diagnostic based on extinction spectrometry: Dedicated light scattering models
594
Development of an in situ neutron-scattering facility for research and education in the mechanical behavior of materials
595
Development of an in situ rheological method to characterize fatty acid crystallization in complex fluids
596
Development of an in situ root caries model B. In situ investigations
597
Development of an in situ root caries model. A. In vitro investigations
598
Development of an in situ soil binding agent
599
Development of an in vitro Endotoxin Test for Monoolein–Water Liquid Crystalline Gel for Use as an Implant
600
Development of an in vitro incubation procedure for screening of CYP2D6 intrinsic clearance
601
Development of an in vitro index to characterize fertilizing capacity of boar ejaculates
602
Development of an in vitro method for determination of methane production kinetics using a fully automated in vitro gas system—A modelling approach
603
Development of an in vitro method to assess the availability of soil-associated radionuclides for uptake by ruminants
604
Development of an in Vitro Model for Investigating the Formation of the Nuclear Ah Receptor Complex in Mouse Hepa 1c1c7 Cells
605
Development of an in vitro model of fish skin and gill
606
Development of an in vitro model system for studying the interaction of Equus caballus IgE with its high-affinity receptor FcɛRI
607
Development of an in vitro model system for studying the interaction of Equus caballus IgE with its high-affinity receptor FcɛRI
608
Development of an in vivo computer for the SAT problem
609
Development of an in vivo method for determining material properties of passive myocardium
610
Development of an inconel self powered neutron detector for in-core reactor monitoring
611
Development of an inconel self powered neutron detector for in-core reactor monitoring
612
Development of an Increased Signal Intensity in Fat-Suppressed Images into a Navicular Cyst of an 11-Year-Old Warmblood Horse Evidenced by Six Follow-Up Standing Low-Field Magnetic Resonance Imaging Examinations Over 2 Years
613
Development of an Index of Aquifer Water Quality within GIS Environment
614
Development of an Index of Balsam Fir Vigor by Foliar Spectral Reflectance
615
Development of an indicator for the emission control of diesel passenger cars
616
Development of an Indigenous Depression Scale for Adolescent Schoolgirls
617
Development of an Indigenous Microwave Absorber
618
Development of an Indigenous Obsessive Compulsive Disorder Scale for Pakistan
619
Development of an indirect competitive ELISA for detection of danofloxacin residue in milk
620
Development of an indirect competitive ELISA for the determination of papaverine
621
Development of an indirect competitive immunoassay for parathion in vegetables
622
Development of an indirect competitive immunoassay for walnut protein component in food
623
Development of an indirect ELISA for bovine mastitis using Sip protein of Streptococcus agalactiae
624
Development of an Indirect ELISA Using Different Fragments of Recombinant Ncgra7 for Detection of Neospora caninum Infection in Cattle and Water Buffalo.
625
Development of an Indirect Enzymelinked Immunosorbent Assay to Detect Antibodies against Serotype A2013 of Foot and Mouth Disease Virus in Cattle
626
Development of an Indirect Fluorescent Antibody (IFA) Assay for the Detection of Leishmania RNA Virus 2 (LRV2) in Leishmania Parasites
627
Development of an Indirect Forced Flow Greenhouse Solar Dryer for Barberry Drying
628
Development of an Indium bump bond process for silicon pixel detectors at PSI
629
Development of an Indium bump bond process for silicon pixel detectors at PSI
630
Development of an individual exposure model for application to the Southern California childrenʹs health study
631
Development of an individual tree-based mechanical model to predict wind damage within forest stands
632
Development of an individual-based model to evaluate elk (Cervus elaphus nelsoni) movement and distribution patterns following the Cerro Grande Fire in north central New Mexico, USA
633
Development of an individual-based model to evaluate elk (Cervus elaphus nelsoni) movement and distribution patterns following the Cerro Grande Fire in north central New Mexico, USA
634
Development of an industrial characterisation method for naphtha reforming bimetallic Pt-Sn/Al2O3 catalysts through n-heptane reforming test reactions
635
Development of an industrial ecology toolbox for the introduction of industrial ecology in enterprises—I
636
Development of an industrial ethanol-producing yeast strain for efficient utilization of cellobiose
637
Development of an industrial medium and a novel fed-batch strategy for high-level expression of recombinant β-mananase by Pichia pastoris
638
Development of an industrial medium for economical 2,3-butanediol production through co-fermentation of glucose and xylose by Klebsiella oxytoca
639
Development of an industrial tool to make passivation layers for UV sensors improvement
640
Development of an industrialised DLC duplex treatment process
641
Development of an Inertial Measurement Unit for Unmanned Aerial Vehicles
642
Development of an inexact optimization model for coupled coal and power management in North China Development of an inexact optimization model for coupled coal and power management in North China
643
Development of an inexpensive and sensitive method for the determination of low quantity of arsenic species in water samples by CPE–FAAS
644
Development of an influenza vaccination protocol for use in an intervention trial to measure the effect of inulin-type fructans on immune function in humans
645
Development of an Information and Database System for the IERS: Status and outlook
646
Development of an information engineering and management program
647
Development of an information system on inherent bioactive compounds in food plants
648
Development of an Informed Consent Form for Intrauterine Device (IUD) Insertion Using the Delphi Method
649
Development of an ingenious method for determination of Dynabeads protein A based on a giant magnetoimpedance sensor
650
Development of an in-house fast real-time PCR method for detection of fish allergen in foods and comparison with a commercial kit
651
development of an in-house indirect elisa test as a diagnostic tool for bovine leptospirosis
652
Development of an InHouse TaqMan Real Time RTPCR Assay to Quantify Hepatitis C Virus RNA in Serum and Peripheral Blood Mononuclear Cells in Patients With Chronic Hepatitis C Virus Infection
653
Development of an injectable grout for concrete repair and strengthening
654
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 1. Encapsulation of marrow stromal osteoblasts in surface crosslinked gelatin microparticles
655
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 2. Viability of encapsulated marrow stromal osteoblasts cultured on crosslinking poly(propylene fumarate)
656
Development of an injectable, in situ crosslinkable, degradable polymeric carrier for osteogenic cell populations. Part 3. Proliferation and differentiation of encapsulated marrow stromal osteoblasts cultured on crosslinking poly(propylene fumarate)
657
Development of an innovative 3-stage steady-bed gasifier for municipal solid waste and biomass
658
Development of an innovative and “green” stir bar sorptive extraction–thermal desorption–gas chromatography–tandem mass spectrometry method for quantification of polycyclic aromatic hydrocarbons in marine biota
659
Development of an innovative interlocking load bearing hollow block system in Malaysia
660
Development of an innovative soil remediation: “Cyclodextrin-enhanced combined technology”
661
Development of an innovative tool to assess hospital learning environments
662
Development of an innovative vertical submerged membrane bioreactor (VSMBR) for simultaneous removal of organic matter and nutrients
663
Development of an innovative wheel–rail contact model for the analysis of degraded adhesion in railway systems
664
Development of an inorganic cations retention model in ion chromatography by means of artificial neural networks with different two-phase training algorithms
665
Development of an inshore fringing coral reef using textural, compositional and stratigraphic data from Magnetic Island, Great Barrier Reef, Australia
666
Development of an in-situ multi-component reinforced Al-based metal matrix composite by direct metal laser sintering technique — Optimization of process parameters
667
Development of an instrument for measuring cognitive conflict in secondary-level science classes
668
Development of an instrument for measuring inter-particle forces
669
Development of an instrument for simultaneous detection of positive and negative scanning ion images
670
Development of an Instrument for the Online Evaluation of Orthodontic-Treated Cases: A Pilot Study
671
Development of an instrument for time–activity curve measurements during PET imaging of rodents
672
Development of an instrument for time–activity curve measurements during PET imaging of rodents
673
Development of an instrument to measure cardiac illness dependency
674
Development of an instrument to measure caring behaviors in nursing students in Taiwan
675
Development of an instrument to measure classroom community
676
Development of an Instrument to Measure Parents’ Preferences and Goals for the Treatment of Attention Deficit–Hyperactivity Disorder
677
Development of an instrument to measure professional attitudes in nursing students in Turkey
678
Development of an Instrument to Measure Self-Efficacy for Social Participation of People With Mental Illness
679
Development of an instrument to measure the responses and management of Chinese primary caregivers in caring of children with minor upper respiratory disorders
680
Development of an instrumented blade system for mapping soil mechanical resistance represented as a second-order polynomial
681
Development of an instrumented indentation device for further characterization of irradiated steels at high temperature
682
Development of an instrumented pole test for use as a gait laboratory quality check
683
Development of an integrally skinned ultrafiltration membrane for wastewater treatment: effect of different formulations of PSf/NMP/PVP on flux and rejection Original Research Article
684
Development of an integrated air conditioner with thermosyphon and the application in mobile phone base station
685
Development of an Integrated Air Quality Monitoring System for Temperature, Humidity, CO, and PM10 Measurement
686
Development of an integrated and open-architecture precision motion control system
687
Development of an integrated approach for the stability testing of flavonoids and ascorbic acid in powders
688
Development of an integrated CAD tool for switching power supply design with EMC performance evaluation
689
Development of an integrated CAD/CAE/CAM system on taper-tipped thread-rolling die-plates
690
Development of an integrated CAD–FEA process for below-knee prosthetic sockets
691
Development of an integrated chromatographic system for on-line digestion and characterization of phosphorylated proteins
692
Development of an integrated CMOS DNA detection biochip
693
Development of an integrated coastal management plan for the Gulf of San Miguel and Darien Province, Panama: Lessons from the experience
694
Development of an integrated computer-aided process planning system for press working products
695
Development of an integrated data storage and retrieval system for TEC
696
Development of an integrated data-acquisition system for renewable energy sources systems monitoring
697
Development of an integrated decision-support model for density management within jack pine stand-types
698
Development of an integrated decision-support model for density management within jack pine stand-types
699
Development of an integrated digital health intervention to promote engagement in and adhe
700
Development of an integrated direct-contacting optical-fiber microchip with light-emitting diode-induced fluorescence detection
701
Development of an integrated dynamic thermal bridging assessment environment
702
Development of an integrated economic and ecological framework for ecosystem-based fisheries management in New England
703
Development of an integrated electrochemical biosensor for sucrose and its implementation in a continuous flow system for the simultaneous monitoring of sucrose, fructose and glucose
704
Development of an integrated fission product release and transport code for spatially resolved full-core calculations of V/HTRs
705
Development of an integrated flow injection system for the electro-oxidative leaching of uranium from geological samples and its spectrophotometric determination with Arsenazo III Original Research Article
706
Development of an Integrated Framework for Facility Relocation Problem: A Case Study
707
Development of an Integrated Fuzzy-Logic-Based Missile Guidance Law Against High Speed Target
708
Development of an integrated geographical information system prototype for coastal habitat monitoring
709
Development of an integrated Grey–fuzzy-based electricity management system for enterprises
710
Development of an integrated information model for computer integrated manufacturing
711
Development of an integrated information resource base for 4D/VR construction processes simulation
712
Development of an integrated knowledge-based system for mold-base design
713
Development of An Integrated Mathematical Model to Optimize Waste Rock dumping Satisfying Environmental Aspects
714
Development of an integrated method for fully characterizing multiphase inclusions and its application to calcium-treated steels
715
Development of an integrated methodology for the energy needs of a major urban city: The case study of Athens, Greece
716
Development of an integrated methodology in support of remaining life assessment of Co-60 based gamma irradiation facilities
717
Development of an integrated microfluidic device for evaluating of in vivo chemo-sensing of intact Caenorhabditis elegans
718
Development of an integrated model for airflow in building spaces
719
Development of an integrated model for assessing the impact of diffuse and point source pollution on coastal waters
720
Development of an integrated model for heat transfer and dynamic growth of Clostridium perfringens during the cooling of cooked boneless ham
721
Development of an Integrated Model for Maintenance Planning and Statistical Process Control
722
Development of an integrated model of personality, personality disorders and severe axis I disorders, with special reference to major affective disorders
723
Development of an integrated neural network system for prediction of process parameters in metal injection moulding
724
Development of an integrated NSOM probe
725
Development of an integrated NSOM probe
726
Development of an integrated onsite earthquake early warning system and test deployment in Zhaotong, China
727
Development of an Integrated Performance Measurement (PM) Model for Pharmaceutical Industry
728
Development of an integrated pretreatment fractionation process for fermentable sugars and lignin: Application to almond (Prunus dulcis) shell
729
Development of an integrated reduced fuel oxidation and soot precursor formation mechanism for CFD simulations of diesel combustion
730
Development of an integrated reflow soldering control system using incremental hybrid process knowledge
731
Development of an integrated response generator for Si/CdTe semiconductor Compton cameras
732
Development of an integrated response generator for Si/CdTe semiconductor Compton cameras
733
Development of an integrated simulation model for treatment and distribution of reclaimed water Original Research Article
734
Development of an integrated single-fiber SERS sensor
735
Development of an integrated solar home system
736
Development of an Integrated Structure of CHP and Heavy Hydrocarbons Liquids Using Fischer-Tropsch Synthesis
737
Development of An Integrated Surface and Sub-Surface Simulation Model in A Single Simulation Platform
738
Development of an integrated water resources management plan for the Lake Manyara sub-basin, Northern Tanzania
739
Development of an Integrated Watershed Management strategy for Resource Conservation in Balochistan Province of Pakistan Original Research Article
740
Development of an integrated wireless sensor network micro-environmental monitoring system
741
Development of an intelligent decision support system for air pollution control at coal-fired power plants
742
Development of an Intelligent Energy Management Network for Building Automation
743
Development of an intelligent indoor environment and energy management system for greenhouses
744
Development of an Intelligent Polymerized Crystalline Colloidal Array Colorimetric Reagent
745
Development of an intelligent quality management system using fuzzy association rules
746
Development of an intelligent system for ultrasonic flaw classification in weldments Original Research Article
747
Development of an Intelligent System to Synthesize Petrophysical Well Logs
748
Development of an intelligent task management system in a manufacturing information network
749
Development of an intelligent technique for traffic network incident detection
750
Development of an interactive computer-based learning strategy to assist in teaching water quality modelling
751
Development of an interactive rule-based system for bulk power system restoration
752
Development of an interfacial thermal lens technique: monitoring the dissolving process of amphiphilic molecules at the hexane–water interface
753
Development of an interference-free biosensor for glucose-6-phosphate using a bienzyme-based Clark-type electrode
754
Development of an interference-free biosensor for l-glutamate using a bienzyme salicylate hydroxylase/l-glutamate dehydrogenase system
755
Development of an interference-free chemiluminescence method for monitoring acetylcholine and choline based on immobilized enzymes Original Research Article
756
Development of an interferent free amperometric biosensor for determination of l-lysine in food Original Research Article
757
Development of an Internal Monostandard Instrumental Neutron Activation Analysis Method Based on In Situ Detection Efficiency for Analysis of Large and Nonstandard Geometry Samples
758
Development of an international standard for shear testing
759
Development of an internet atlas of Switzerland
760
Development of an interoperability model for different construction drawing standards based on ISO 10303 STEP
761
Development of an inter-process linkage technology for fluoro-nitric acid washing-agent and its LCA evaluation
762
Development of an interrupting chamber for 1000 kV high-speed grounding switches
763
Development of an Interview for Anxiety-Relevant Interpersonal Styles: Preliminary Support for Convergent and Discriminant Validity
764
Development of an intra-cavity gas detection system based on L-band erbium-doped fiber ring laser
765
Development of an intra-lamellar microdialysis method for laminitis investigations in horses
766
Development of an intrument to ae viion-related quality of life in young children
767
Development of an intuitive user interface for a hydraulic backhoe
768
Development of an invasive species distribution model with fine-resolution remote sensing
769
Development of an Inventory Control Model for Reusable Items: Economic Quantities of Order and Recovery
770
Development of an inverse diffusion partial oxidation flame and model burner contributing to the development of 3rd generation coal gasifiers
771
Development of an inverse finite element method with an initial guess of linear unfolding
772
Development of an investment decision tool for biogas production from agricultural waste
773
Development of an in-vitro mouth model to quantify salt release from gels
774
Development of an in-vivo method of wrist joint motion analysis
775
Development of an ion chromatographic gradient retention model from isocratic elution experiments
776
Development of an Ion Chromatographic Method for Determination of Inorganic Anions in Surface Water by Using Computer-Assisted Gradient Optimization Methodology
777
Development of an ion exchange system for plating wastewater treatment Original Research Article
778
Development of an ion-beam sputtering system for depositing thin films and multilayers of alloys and compounds
779
Development of an ion-channel sensor for heparin detection Original Research Article
780
Development of an ionic liquid based dispersive liquid–liquid microextraction method for the analysis of polycyclic aromatic hydrocarbons in water samples
781
Development of an ionic liquid-based dispersive liquid–liquid microextraction method for the determination of nifurtimox and benznidazole in human plasma
782
Development of an ionic liquid-based microwave-assisted method for simultaneous extraction and distillation for determination of proanthocyanidins and essential oil in Cortex cinnamomi
783
Development of an ionic liquid-based ultrasonic-assisted liquid–liquid microextraction method for sensitive determination of biogenic amines: Application to the analysis of octopamine, tyramine and phenethylamine in beer samples
784
Development of an Iranian CPB Based Risk Stratification Score Model, an Iranian Risk Stratification Model
785
Development of an Iranian Sexual Satisfaction Model: A Qualitative Research
786
Development of an iridium–tantalum modified aluminide coating as a diffusion barrier on nickel-base single crystal superalloy TMS-75
787
Development of an iron oxide-impregnated paper strip technique for the determination of bioavailable phosphorus in runoff
788
Development of an irrigation vulnerability assessment model in agricultural reservoirs utilizing probability theory and reliability analysis
789
Development of an isotope dilution mass spectrometry assay for HbA1c based on enzyme-cleaved peptide analysis
790
Development of an isotope labeling ultra-high performance liquid chromatography mass spectrometric method for quantification of acylglycines in human urine Original Research Article
791
Development of an isotope-coded activity-based probe for the quantitative profiling of cysteine proteases
792
Development of an ITER relevant inspection robot
793
Development of an LC-ESI–MS/MS method for the determination of histamine: Application to the quantitative measurement of histamine degranulation by KU812 cells
794
Development of an LC–MS method for determination of three active constituents of Shuang-huang-lian injection in rat plasma and its application to the drug interaction study of Shuang-huang-lian freeze-dried powder combined with levofloxacin injection
795
Development of an LC–MS/MS assay to determine plasma pharmacokinetics of the radioprotectant octadecyl thiophosphate (OTP) in monkeys
796
Development of an LC–MS/MS method for the quantitation of 55 compounds prescribed in combined cardiovascular therapy
797
Development of an LEFM dynamic crack criterion for correlated size and rate effects in concrete beams
798
Development of an LENA instrument for planetary missions by numerical simulations
799
Development of an l-glutamate biosensor using the coimmobilization of l-glutamate dehydrogenase and p-hydroxybenzoate hydroxylase on a Clark-type electrode
800
Development of an MSE-based chemical model for the solubility of calcium sulphate in mixed chloride–sulphate solutions
801
Development of an MSFIA-MPFS pre-treatment method for radium determination in water samples
802
Development of an n-3 fatty acid and α-tocopherol enriched dry fermented sausage
803
Development of an n-channel CCD, CCD-NeXT1, for Soft X-ray Imager onboard the NeXT satellite
804
Development of an n-channel CCD, CCD-NeXT1, for Soft X-ray Imager onboard the NeXT satellite
805
Development of an n-heptane-n-butanol-PAH mechanism and its application for combustion and soot prediction
806
Development of an N-heterocyclic carbene ligand based on concept of chiral mimetic
807
Development of an N-hydroxysuccinimidyl fluorescein-O-acetate-labeled probe for competitive capillary electrophoretic immunoassay of bovine serum albumin
808
Development of an N-sulfinyl prolinamide for the asymmetric aldol reaction
809
Development of an OAPCP-micropump liquid cooling system in a laptop
810
Development of an objective instrument to assess quality of life in social services: Reliability and validity in Spain
811
Development of an Objective Tool for Predicting Obstructive Sleep Apnea among Adults: PAN Apnea Index
812
Development of an object-oriented finite element program: application to metal-forming and impact simulations
813
Development of an object-oriented scheduling model for construction projects
814
Development of an observational error model
815
Development of an obstacle-avoiding mobile robotic platform using a low-end Tbudget PIC microcontroller
816
Development of an occupational exposure limit for n-propylbromide using benchmark dose methods
817
Development of an oceanographic towing vehicle adapted for fishing craft: Prototype and protocol for use
818
Development of an off-line capillary column IMAC phosphopeptide enrichment method for label-free phosphorylation relative quantification
819
Development of an Oil Field’s Conceptual Model
820
Development of an Oligidic Diet forin VitroRearing ofTrichogramma galloiZucchi andTrichogramma pretiosumRiley
821
Development of an oligosorbent for detection of ochratoxin A
822
Development of an on-board charge and discharge management system for electric-vehicle batteries
823
Development of an on-column affinity smart polymer gel glucose sensor Original Research Article
824
Development of an on-column enrichment technique based on C18-functionalized magnetic silica nanoparticles for the determination of lidocaine in rat plasma by high performance liquid chromatography
825
Development of an online analyzer of atmospheric H2O2 and several organic hydroperoxides for field campaigns
826
Development of an on-line electrochemical analyser for trace level aluminium Original Research Article
827
Development of an on-line extraction turbulent flow chromatography tandem mass spectrometry method for cassette analysis of Caco-2 cell based bi-directional assay samples
828
Development of an on-line high performance liquid chromatography detection system for human cytochrome P450 1A2 inhibitors in extracts of natural products
829
Development of an on-line Irish food composition database for nutrients
830
Development of an on-line Irish food composition database for nutrients
831
Development of an on-line isotope dilution laser ablation inductively coupled plasma mass spectrometry (LA–ICP-MS) method for determination of boron in silicon wafers
832
Development of an on-line matrix solid-phase dispersion/fast liquid chromatography/tandem mass spectrometry system for the rapid and simultaneous determination of 13 sulfonamides in grass carp tissues
833
Development of an on-line optical method for assessment of the bubble size and morphology in aerated food products
834
Development of an on-line preconcentration system for zinc determination in biological samples
835
Development of an online preparation system for multitracer solutions
836
Development of an on-line procedure for the indirect determination of iodide by flow-injection cold-vapor atomic absorption spectrometry
837
Development of an on-line size exclusion chromatographic — reversed-phase liquid chromatographic two-dimensional system for the quantitative determination of peptides with concentration prior to reversed-phase liquid chromatographic separation Original Re
838
Development of an on-line size exclusion chromatographic -reversed-phase liquid chromatographic two-dimensional system for the quantitative determination of peptides with concentration prior to reversed-phase liquid chromatographic separation
839
Development of an on-line tar measurement method based on photo ionization technique
840
Development of an online tool for tsunami inundation simulation and tsunami loss estimation
841
Development of an online two-dimensional nano-scale liquid chromatography/mass spectrometry method for improved chromatographic performance and hydrophobic peptide recovery
842
Development of an on-line weak-cation exchange liquid chromatography–tandem mass spectrometric method for screening aldehyde products in biological matrices
843
Development of an online-SPE-LC-MS method for the investigation of the intestinal absorption of 2-amino-1-methyl-6-phenylimidazo[4,5-b]pyridine (PHIP) and its bacterial metabolite PHIP-M1 in a Caco-2 Transwell system
844
Development of an on-site screening system for amphetamine-type stimulant tablets with a portable attenuated total reflection Fourier transform infrared spectrometer Original Research Article
845
Development of an on-time logger for irrigation systems
846
Development of an on-time logger for irrigation systems
847
Development of an operational model-based warning system for tropospheric ozone concentrations in Bordeaux, France
848
Development of an operational procedure to estimate surface albedo from the SEVIRI/MSG observing system by using POLDER BRDF measurements: I. Data quality control and accumulation of information corresponding to the IGBP land cover classes
849
Development of an operational procedure to estimate surface albedo from the SEVIRI/MSG observing system by using POLDER BRDF measurements: II. Comparison of several inversion techniques and uncertainty in albedo estimates
850
Development of an operational synaptobrevin-based fluorescent substrate for tetanus neurotoxin quantification
851
Development of an operations evaluation system for sinking EDM
852
Development of an optical ammonia sensor based on polyaniline/epoxy resin (SU-8) composite
853
Development of an optical biosensor assay for detection of (beta)-lactam antibiotics in milk using the penicillin-binding protein 2x
854
Development of an optical biosensor assay for detection of β-lactam antibiotics in milk using the penicillin-binding protein 2x* Original Research Article
855
Development of an optical biosensor using gold nanoparticles and quantum dots for the detection of Porcine Reproductive and Respiratory Syndrome Virus
856
Development of an optical chemical sensor based on 2-(5-bromo-2-pyridylazo)-5-(diethylamino)phenol in Nafion for determination of nickel ion
857
Development of an optical current transducer with a bulk type Faraday sensor for metering
858
Development of an optical current transformer for adjustable speed pumped storage systems
859
Development of an optical device for thermal neutrons by amorphous perfluoropolymer
860
Development of an optical device for thermal neutrons by amorphous perfluoropolymer
861
Development of an optical fibre reflectance sensor for copper (II) detection based on immobilised salicylic acid
862
Development of an optical fibre reflectance sensor for lead detection based on immobilised arsenazo III
863
Development of an optical fibre reflectance sensor for p-aminophenol detection based on immobilised bis-8-hydroxyquinoline
864
Development of an optical flow-through biosensor for the determination of sulphite in environmental samples
865
Development of an optical hydrogen sulphide sensor
866
Development of An Optical Sensor Based on Sol-gel Doped with 2,6-Dichlorophenol Indophenol for Analysis of Ascorbic Acid
867
Development of an optical sensor for 2D multi-point alignment
868
Development of an optical sensor for 2D multi-point alignment
869
Development of an optical sensor for determination of zinc by application of PC-ANN
870
Development of an optical sensor for determination of zinc by application of PC-ANN
871
Development of an optical sensor for dynamic monitoring of off-round and eccentric errors of cylindrical parts
872
Development of an Optical Sensor for the Measurement of the Material Flow in Deep Drawing Processes
873
Development of an optical sensor probe for the detection of dissolved carbon dioxide
874
Development of an optical surface plasmon resonance biosensor assay for (fluoro)quinolones in egg, fish, and poultry meat Original Research Article
875
Development of an optical voltage transformer for power protection relays
876
Development of an optimal bacterial medium based on the growth inhibition assay with Vibrio fischeri
877
Development of an optimal charging algorithm of a Ni-MH battery for stationary fuel cell/battery hybrid system application
878
Development of an optimal contracting strategy using genetic algorithms in the England and Wales standing reserve market
879
Development of an optimal daylighting controller
880
Development of an optimal formulation for oxidative stability of walnut-beverage emulsions based on gum arabic and xanthan gum using response surface methodology
881
Development of an optimal hybrid finite volume/element method for viscoelastic flows
882
Development of An Optimal Low-Noise Voice-Coil Actuator for Precision Motion Control Applications
883
Development of an Optimal Medium for Continuous Ferrous Iron Oxidation by Immobilized Acidothiobacillus ferrooxidans Cells
884
Development of an optimal preventive maintenance model based on the reliability assessment for air-conditioning facilities in office buildings
885
Development of an optimal X-ray beam for dual-mode emission and transmission mammotomography
886
Development of an optimal X-ray beam for dual-mode emission and transmission mammotomography
887
DEVELOPMENT OF AN OPTIMISATION MODEL FOR AUTOMOTIVE COMPONENT REUSE
888
Development of an optimised irrigation system selection model using analytical hierarchy process
889
Development of an Optimised Losartan Potassium Press-Coated Tablets for Chronotherapeutic Drug Delivery
890
Development of an optimised papaya pulp nectar using a combination of irradiation and mild heat
891
Development of an optimised, standard-compliant procedure to calculate sound transmission loss: design of transmission rooms
892
Development of an optimised, standard-compliant procedure to calculate sound transmission loss: numerical measurements
893
Development of an optimization model for water resources systemsplanning
894
Development of an optimization model for water resources systemsplanning
895
Development of an optimization strategy for insulation thickness of a domestic refrigerator-freezer
896
Development of an optimized artificial neural network model for combined heat and power micro gas turbines
897
Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance
898
Development of an optimized condition-based maintenance system by data fusion and reliability-centered maintenance
899
Development of an optimized dextran retention test for large pore size hollow fiber ultrafiltration membranes
900
Development of an Optimized Feeding Technology for Dairy Cows
901
Development of an optimized multi-biomarker panel for the detection of lung cancer based on principal component analysis and artificial neural network modeling
902
Development of an optimized peptide map for recombinant activated human protein C by means of an experimental design strategy
903
Development of an optimized, simple chemically defined medium for bacterial cellulose production by Acetobacter sp. A9 in shaking cultures
904
Development of an optimum design program (SUSB-OPTIMUM) for the life cycle CO2 assessment of an apartment house in Korea
905
Development of an Optoelectrostatic Micropump Using a Focused Laser Beam in a High-Frequency Electric Field
906
Development of an opto-hydrodynamic process to remove nanoparticles from solid surfaces
907
Development of an optrode membrane for the determination of picric acid based on fluorescence energy transfer
908
Development of an oral cancer slope factor for Aroclor 1268
909
Development of an oral tolerance model in rats for investigation of bioactive food components
910
Development of an orange juice in-house reference material and its application to guarantee the quality of vitamin C determination in fruits, juices and fruit pulps
911
Development of an orexin-2 receptor selective agonist, [Ala11, -Leu15]orexin-B
912
Development of an organically bound tritium standard
913
Development of an organo- and enzyme-catalysed one-pot, sequential three-component reaction
914
Development of an original active thermography method adapted to ITER plasma facing components control
915
Development of an original model for the synthesis of silicon nanodots by Low Pressure Chemical Vapor Deposition
916
Development of an orthogonal method for mometasone furoate impurity analysis using supercritical fluid chromatography
917
Development of an oscillating/rotating/pulsating toothbrush: The Oral-B professionalCare™ series
918
Development of an outerdirected style of problem solving in individuals with and without mental retardation
919
Development of an oxazolopyridine series of dual thrombin/factor Xa inhibitors via structure-guided lead optimization
920
Development of an oxidase-based glucose sensor using thickness-shear-mode quartz crystals
921
Development of an oxidative dehydrogenation-based fluorescent probe for Cu2+ and its biological imaging in living cells Original Research Article
922
Development of an oxide dispersion strengthened, reduced-activation steel for fusion energy
923
Development of an oxycoal swirl burner operating at low O2 concentrations
924
Development of an oxygen sensor for molter 44.5% lead–55.5% bismuth alloy
925
Development of an ozone gas sensor using single-walled carbon nanotubes
926
Development of an r.f. driven negative hydrogen ion source
927
Development of an RF-input coupler with a multi-loop antenna for the RFQ linac in IFMIF project
928
Development of an RNA detection system using bioluminescence resonance energy transfer
929
Development of an RNA isolation procedure for the characterisation of human endothelial cell interactions with polyurethane cardiovascular bypass grafts
930
Development of an RP-HPLC method for the simultaneous determination of benzoic acid, sorbic acid, natamycin and lysozyme in hard and pasta filata cheeses
931
Development of an RP-HPLC-UV Method for Simultaneous Detection of Nimodipine and its Metabolite in Cerebrospinal Fluid of Rat
932
Development of an RSA calibration system with improved accuracy and precision
933
Development of an RT-PCR for the detection of little cherry virus and characterization of some isolates occurring in Europe
934
Development of an SNP Marker for Sugar Beet Resistance/Susceptible Genotyping to Root-Knot Nematode
935
Development of an SPME–GC–MS/MS method for the determination of pesticides in rainwater: Laboratory and field experiments
936
Development of an SPME–GC–MS/MS procedure for the monitoring of 2-phenoxyethanol in anaesthetised fish
937
Development of an UAS for post-earthquake disaster surveying and its application in Ms7.0 Lushan Earthquake, Sichuan, China
938
Development of an ultra low field-ripple electromagnet
939
Development of an ultra low field-ripple electromagnet
940
Development of an ultra sonic phased array system for nondestructive tests of nuclear power plant components Original Research Article
941
Development of an ultrafine grained ferrite in a low C–Mn and Nb–Ti microalloyed steels after warm torsion and intercritical annealing
942
Development of an ultra-fine grained V-1.7 mass% Y alloy dispersed with yttrium compounds having superior ductility and high strength
943
Development of an ultra-fine grained V–1.7 mass% Y alloy dispersed with yttrium compounds having superior ductility and high strength
944
Development of an ultra-high performance liquid chromatography analytical methodology for the profiling of olive (Olea europaea L.) pulp proteins Original Research Article
945
Development of an ultra-high-performance liquid chromatography–tandem mass spectrometry method for high throughput determination of organophosphorus flame retardants in environmental water
946
Development of an ultra-high-pressure liquid chromatography–tandem mass spectrometry multi-residue sulfonamide method and its application to water, manure slurry, and soils from swine rearing facilities
947
Development of an ultrahigh-resolution Si-PM-based dual-head GAGG coincidence imaging system
948
Development of an ultrahigh-resolution Si-PM-based dual-head GAGG coincidence imaging system
949
Development of an ultra-high-speed scanning neutron tomography system for high-quality and four-dimensional visualizations
950
Development of an ultra-high-speed scanning neutron tomography system for high-quality and four-dimensional visualizations
951
Development of an ultra-low temperature scanning tunneling microscope and applications for low temperature physics Original Research Article
952
Development of an ultra-performance liquid chromatography–mass spectrometry method for the detection of lipophilic marine toxins
953
Development of an ultrasensitive electrochemiluminescence inhibition method for the determination of tetracyclines Original Research Article
954
Development of an ultrasensitive enzyme immunoassay for human proadrenomedullin N-terminal 20 peptide and direct measurement of two molecular forms of PAMP in plasma from healthy subjects and patients with cardiovascular disease
955
Development of an ultrasonic elliptic-vibration shoe centerless grinding technique
956
Development of an ultrasonic experimental device to characterise concrete for structural repair
957
Development of an ultrasonic motor as a fine-orienting stage
958
Development of an ultrasonic test method for the non-destructive examination of ITER divertor components
959
Development of an ultrasound-assisted emulsification–microextraction method for the determination of the main compounds causing cork taint in wines
960
Development of an ultrasound-assisted extraction method for biomonitoring of vanadium and nickel in the coastal environment under the influence of the Prestige fuel spill (North east Atlantic Ocean) Original Research Article
961
Development of an ultrathin BD-PCD wheel-tool for in situ microgroove generation on NAK80 mold steel
962
Development of an ultra-violet digital camera for volcanic SO2 imaging
963
Development of an unannounced standardized patient protocol to evaluate opioid use disorder treatment in pregnancy for American Indian and rural communities
964
Development of an unbalanced switching scheme for a current source inverter
965
Development of an undergraduate course – Internet-based instrumentation and control
966
Development of an underground radon detector using an optical fiber
967
Development of an universal group contribution equation of state: I. Prediction of liquid densities for pure compounds with a volume translated Peng–Robinson equation of state
968
DEVELOPMENT OF AN UNIVERSAL PAINT STRIPPER FOR METALS
969
DEVELOPMENT OF AN UNMANNED UNDERWATER REMOTELY OPERATED CRAWLER (ROC) FOR MONITORING APPLICATION
970
Development of an urban energy demand forecasting system to support environmentally friendly urban planning
971
Development of an urban inventory for road transport emissions of NO2 and comparison with estimates derived from ambient measurements
972
Development of an X-ray detector using surface plasmon resonance
973
Development of an X-ray detector using surface plasmon resonance
974
Development of an X-ray imaging microcalorimeter with a pixel-type Ir transition edge sensor
975
Development of an X-ray imaging microcalorimeter with a pixel-type Ir transition edge sensor
976
Development of an xspec-based spectral analysis system for the coded-aperture hard X-ray balloon payload EXITE2
977
Development of anaerobic digestion methods for palm oil mill effluent (POME) treatment
978
Development of anaerobic migrating blanket reactor (AMBR), a novel anaerobic treatment system
979
Development of analysis of volatile polyfluorinated alkyl substances in indoor air using thermal desorption-gas chromatography–mass spectrometry
980
Development of analysis tools for social, economic and ecological effects of water reuse Original Research Article
981
Development of analytic microdevices for the detection of phenol using polymer hydrogel particles containing enzyme–QD conjugates
982
Development of analytical and preparative chromatographic separations of novel growth hormone secretagogue compounds
983
Development of Analytical Method for Detection of Some Pharmaceuticals in Surface Water
984
Development of analytical methodology for quantitation of organic and inorganic compounds in air particulate matters
985
Development of analytical methods for multiresidue determination of quinolones in pig muscle samples by liquid chromatography with ultraviolet detection, liquid chromatography–mass spectrometry and liquid chromagraphy–tandem mass spectrometry
986
Development of analytical methods for the assessment of ecotoxicological relevant soil contamination : Part B — Ecotoxicological Analysis in Soil and Soil Extracts
987
Development of analytical methods for the assessment of ecotoxicological relevant soil contamination- Part A - Development and improvement of soil extraction methods for the determination of the bioavailable parts of contaminants
988
Development of analytical methods for the determination of tenuazonic acid analogues in food commodities
989
Development of Analytical Probabilistic Model Parameters for Urban Stormwater Management
990
Development of analytical procedure for the determination of methyltin, butyltin, phenyltin and octyltin compounds in landfill leachates by gas chromatography–inductively coupled plasma mass spectrometry Original Research Article
991
Development of analytical procedures to study changes in the composition of meat phospholipids caused by induced oxidation
992
Development of analytical systems for the simultaneous determination of the speciation of arsenic [As(III), methylarsonic acid, dimethylarsinic acid, As(V)] and selenium [Se(IV), Se(VI)] Original Research Article
993
Development of analytical techniques for ultra trace amounts of nuclear materials in environmental samples using ICP-MS for safeguards
994
Development of anchored oligothiophenes on substrates for the application to the tunable transparent conductive films
995
Development of Androgen Receptor Antagonists with Promising Activity in Castration-Resistant Prostate Cancer
996
Development of aneuploidy and nuclear pleomorphism in thyroid follicular cells of TGCT transgenic mice
997
DEVELOPMENT OF ANFIS-PSO, SVR-PSO, an‎d ANN-PSO HYBRID INTELLIGENT MODELS FOR PREDICTING THE COMPRESSIVE STRENGTH OF CONCRETE
998
Development of angle indexes for soil moisture estimation, dry matter detection and land-cover discrimination
999
Development of Animal Drawn Groundnut Planting Machine for Small Holdings Farmers in North Kordofan of Sudan
1000
Development of animal feeding additives from mushroom waste media of shochu lees