<< مقالات لاتين >>
<< بر اساس عنوان >>
1
There is no gap ‘per se’ between theory and practice: Research knowledge and clinical knowledge are developed in different contexts and follow their own logic
2
There is no getting round Gettier
3
There is no infinite fatigue life in metallic materials
4
There is no non-materialist neuroscience
5
There is no norm of truth: a minimalist reply to Wright
6
There is no norm of truth: a minimalist reply to Wright
7
There is no optimal foraging group size
8
There is no optimal routing policy for the torus
9
There is no recursive link between the k-size of a model and its cardinality Original Research Article
10
There is no silver bullet: The value of diversification in planning invasive species surveillance
11
There is no simple method to maintain a constant ethanol concentration in long-term cell culture: Keys to a solution applied to the survey of astrocytic ethanol absorption
12
There Is no Substitute for Brilliance Except for Experience
13
There Is No Tame Triangulation of the Infinite Real Grassmannian
14
There is no universal countable random-free graph
15
There is no upper bound for the diameter of the commuting graph of a finite group
16
There is no upper bound of small transfinite compactness degree in metrizable spaces
17
There is no variational characterization of the cycles in the method of periodic projections
18
There is no κ(900) Original Research Article
19
There is Nothing Else to Do but Make Films: Urban Youth Participation at a Film and Television School
20
There is nothing wrong with inclusive fitness
21
There is often strong interference if a second target stimulus (T2) is presented before processing of a prior target stimulus (T1) isComplete. In the “Psychological Refractory Period” (PRP) paradigm, responses are speeded and interference manifests as inc
22
There Is Plenty of Room for Cardiac Resynchronization Therapy Devices Without Back-Up Defibrillators in the Electrical Treatment of Heart Failure Review Article
23
There is plenty of room for new structures at the bottom
24
There is still hope for multifaceted intervention in heart failure
25
There is strong and consistent evidence across numerous studies that social isolation or lack of social support is an independent risk factor for incident coronary heart disease. However, the impact of social isolation or lack of social support on the pro
26
There may never be a final cure for breast cancer
27
There may never be a final cure for breast cancer (unless we think outside the box)
28
There ought to be no pain
29
There Should Never Be Another Antiarrhythmics Versus Implantable Defibrillator (AVID) Trial
30
There should not be any “probable” or “possible” left ventricular noncompaction
31
There was No More Sea: the supersession of the ocean, from the bible to cyberspace
32
There’s education, and then there’s education in medicine
33
There’s more to the picture than meets the eye: Sampling microphytobenthos in a heterogeneous environment
34
There’s no easy way
35
There’s nothing inherent about scale: political ecology, the local trap, and the politics of development in the Brazilian Amazon
36
There’s something about Mary: The moral value of things qua information objects
37
There’s something about the diameter
38
There’s work to be done
39
Therelationshipbetweenirradiationinduceddimensionalchangeandthecoefficientofthermalexpansion:amodifiedSimmonsrelationshipOriginalResearchArticle
40
TheremovalofthepertechnetateionandactinidesfromradioactivewastestreamsatHanford,Washington,USAandSellafield,Cumbria,UK:theroleofiron-sulfide-containingadsorbentmaterialsOriginalResearchArticle
41
Thereʹs (still) plenty of room at the bottom
42
Thereʹs a new man in town: the paradigm shift in optical technology
43
Thereʹs a ratfish in our cellar!
44
Thereʹs a right way and a wrong way: in vivo and in vitro folding, misfolding and subunit assembly of the P22 tailspike
45
Thereʹs a Time and a Place for MYCN
46
Thereʹs gold in Kansas City — gold allergy, that is!
47
Thereʹs gold in them thar stacks: the importance of print collections in the digital age: report of the ALCTS presidentʹs program
48
Theres More to Life Than Making Plans Plan Management in Dynamic, Multiagent Environments
49
Thereʹs more to the picture than meets the eye: Measuring tangible and intangible capital in two marginal communities in rural Denmark
50
Thereʹs more to vision than meets the eye: Seeing and Visualizing: Itʹs Not What You Think, by Zenon Pylyshyn. MIT Press 2004. $50.00/£32.95 (xviii+563 pp.) ISBN 0 262 16217 2
51
Thereʹs no excuse for being “useless with names”
52
Thereʹs no pain in the FitzGerald contraction, is there?
53
Thereʹs no pain without brain
54
Thereʹs no place like (a) home: Ontological security among persons with serious mental illness in the United States
55
Theres no place like WormBase: an indispensable resource for Caenorhabditis elegans researchers
56
Thereʹs no such thing as the amygdala
57
Thereʹs something fishy going on around here
58
Thereʹs Waldo!
59
Theresa Dunne, Christine Helliar, Chris Mallin, Lance Moir, Kean Ow-Yong and David Power, The financial reporting of derivatives and other financial instruments: A study of the implementation and disclosures of FRS 13, Institute of Chartered Accountants i
60
Thérèse Mound: a case study of coral bank development in the Belgica Mound Province, Porcupine Seabight
61
Theresultofawallfailurein-pileexperimentundertheEAGLEprojectOriginalResearchArticle
62
THERIA_G: a software program to numerically model prograde garnet growth
63
Theriac Found? Nitric Oxide-Aspirin and the Search for the Universal Cure
64
Therinodynamics of TiO(x) in Blast Furnace-Type Slags
65
Therinodynamics of TiO(x) in Blast Furnace-Type Slags
66
Thermag III: The 3rd International IIR Conference on Magnetic Refrigeration at Room Temperature May 11–15, 2009, Des Moines, Iowa, USA
67
Thermage: Monopolar radiofrequency
68
Thermage: the nonablative radiofrequency for rejuvenation
69
Thermaikos Gulf Coastal System, NW Aegean Sea: an overview of water/sediment fluxes in relation to air–land–ocean interactions and human activities
70
Thermal (DSC) characterization of xPbO–(1−x)P2O5 glass system
71
Thermal [3,3]-rearrangement of 1,1-disubstituted allyl carboxylates: lone pair participation and the geminal bond participation
72
Thermal [3+2] cycloaddition reaction of azomethine imines with allenoates for dinitrogen-fused heterocycles
73
Thermal 1,3-proton shift reaction and its application for operationally convenient and improved synthesis of α-(trifluoromethyl)benzylamine
74
Thermal 1/f noise from the theory of partitions: application to a quartz resonator
75
Thermal 1/ω fluctuations of a quantum oscillator under a parametric effect of a random field
76
Thermal 3D model for Direct Solar Steam Generation under superheated conditions
77
Thermal 40Ar/39Ar separation of diagenetic from detrital illitic clays in Gulf Coast hales
78
Thermal 40Ar/39Ar separation of diagenetic from detrital illitic clays in Gulf Coast shales
79
Thermal abatement of nitrogen-containing hydrocarbons by non-catalytic supercritical water oxidation (SCWO)
80
Thermal ablation of the small renal mass: Case selection using the R.E.N.A.L.-Nephrometry Score
81
Thermal ablation of the small renal mass: Case selection using the R.E.N.A.L.-Nephrometry Score
82
Thermal abundance of non-relativistic relics with Sommerfeld enhancement Original Research Article
83
Thermal abuse performance of high-power 18650 Li-ion cells
84
Thermal acceptability assessment in buildings located in hot and humid regions in Brazil
85
Thermal acclimation and non-shivering thermogenesis in three species of South American rodents: a comparison between arid and mesic habitats
86
Thermal acclimation in a complex life cycle: The effects of larval and adult thermal conditions on metabolic rate and heat resistance in Culex pipiens (Diptera: Culicidae)
87
Thermal acclimation in the marine diatom Chaetoceros calcitrans (Bacillariophyceae)
88
Thermal acclimation of organic matter decomposition in an artificial forest soil is related to shifts in microbial community structure
89
Thermal acclimation of organic matter decomposition in an artificial forest soil is related to shifts in microbial community structure
90
Thermal accommodation coefficients between polyatomic gas molecules and soot in laser-induced incandescence experiments
91
Thermal action and specific heat of the five-dimensional non-extremal black hole
92
Thermal action of a short light pulse on biological tissues
93
Thermal activated (“thermal”) battery technology: Part IIIa: FeS2 cathode material
94
Thermal activated (“thermal”) battery technology: Part IIIb. Sulfur and oxide-based cathode materials
95
Thermal activated (thermal) battery technology: Part II. Molten salt electrolytes
96
Thermal Activation Analyses of Dynamic Fracture Toughness of High Strength Low Alloy Steels
97
Thermal activation and alkali dissolution of silicon from illite
98
Thermal activation and reaction of allyl alcohol on Ni(100)
99
Thermal activation energy of crystal and amorphous nano-silicon in SiO2 matrix
100
Thermal activation of atomic rearrangements in elastically deformed Ni50Zr50 metallic glasses
101
Thermal activation of carriers and characteristic features of the electronic structure of quasicrystalline systems
102
Thermal activation of carriers and characteristic features of the electronic structure of quasicrystalline systems
103
Thermal activation of copper oxide based upon the copper hydrotalcite CuxZn6−xAl2(OH)16(CO3)·4H2O
104
Thermal activation of copper oxide based upon the copper hydrotalcites of the type CuxZn6−xCr2(OH)16(CO3)·4H2O
105
Thermal activation of DNA frayed wire formation Original Research Article
106
Thermal activation of electrochemical processes in a Rf-heated channel flow cell: experiment and finite element simulation
107
Thermal activation of ethylene glycol embedded in carbon nanotubes – Computer simulation study
108
Thermal activation of fatigue crack growth: Analysing the mechanisms of fatigue crack propagation in superalloys
109
Thermal activation of flow stress transients in mild steel
110
Thermal activation of flow stress transients in mild steel
111
Thermal activation of ordinary Portland cement–slag mortars
112
Thermal activation of serpentine prior to acid leaching
113
Thermal activation of the electronic transport in porous titanium dioxides
114
Thermal activation of the electronic transport in porous titanium dioxides
115
Thermal activation of the trapped proton in diamond crystal: direct molecular dynamics calculation
116
Thermal activation processes of tensile deformation in γ-TiAl alloy
117
Thermal activation processes of tensile deformation in γ-TiAl alloy
118
Thermal activation rates in the chirally asymmetric Gross-Neveu model Original Research Article
119
Thermal activity within the western-slope geothermal zone of Aso volcano, Japan: Development of a new thermal area
120
Thermal actuation of graphene oxide nanoribbon mats
121
Thermal adaptability of olive (Olea europaea L.) to the Arid Chaco of Argentina
122
Thermal adaptation in the built environment: a literature review
123
Thermal Adaptation of the Yeast Mitochondrial Hsp70 System is Regulated by the Reversible Unfolding of its Nucleotide Exchange Factor
124
Thermal adaptations in deep-sea hydrothermal vent and shallow-water shrimp
125
Thermal adaptive implicit method: Time step selection
126
Thermal AFM: a thermopile case study
127
Thermal AFM: a thermopile case study
128
Thermal AFM: a thermopile case study
129
Thermal ageing of electrical conductivity in carbon nanotube/polyaniline composite films Original Research Article
130
Thermal ageing of nanostructured tetragonal zirconia ceramics: Characterization of interfaces
131
Thermal ageing of poly(ethylene oxide)/poly(3,4-ethylenedioxythiophene) semi-IPNs
132
Thermal ageing of rocket propellant formulations containing ε-HNIW (ε-CL20) investigated by heat generation rate and mass loss
133
Thermal ageing on the microstructure and mechanical properties of Al–Cu–Mg alloy/bagasseash particulate composites
134
Thermal ageing process at laboratory scale to evaluate the lifetime of Liquefied Natural Gas storage and loading/unloading materials
135
Thermal agglomeration of chocolate drink powder Original Research Article
136
Thermal aggregation and gelation of kidney bean (Phaseolus vulgaris L.) protein isolate at pH 2.0: Influence of ionic strength
137
Thermal aggregation of almond protein isolate
138
Thermal aggregation of bovine serum albumin studied by asymmetrical flow field-flow fractionation Original Research Article
139
Thermal aggregation of egg white proteins as affected by saccharides
140
Thermal aggregation of globulin from an indigenous Chinese legume, Phaseolus angularis (red bean)
141
Thermal aggregation of hen egg white lysozyme: effect of polyamines
142
Thermal aggregation of methylcellulose with different molecular weights
143
Thermal aggregation of whey proteins in the presence of buttermilk concentrate Original Research Article
144
Thermal aggregation of α-chymotrypsin: Role of hydrophobic and electrostatic interactions Original Research Article
145
Thermal aggregation of β-lactoglobulin in presence of metal ions Original Research Article
146
Thermal aggregation properties of whey protein glycated with various saccharides
147
Thermal aggregation, amino acid composition and in vitro digestibility of vicilin-rich protein isolates from three Phaseolus legumes: A comparative study
148
Thermal aging and reduced hydrophobic recovery of polydimethylsiloxane
149
Thermal aging behavior of plasma sprayed LaMgAl11O19 thermal barrier coating
150
Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications
151
Thermal aging effect on Z3CN20.09M Cast Duplex Stainless Steel Original Research Article
152
Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites
153
Thermal aging effects on the mechanical properties of as-cast Ni3Al-based alloy
154
Thermal aging effects on the microstructure and short-term oxidation behavior of a cast Ni3Al alloy
155
Thermal aging effects on the microstructure of Nb-bearing nickel based superalloy weld overlays using ultrasound techniques
156
Thermal aging of carbon black filled rubber compounds. I. Experimental evidence for bridging flocculation
157
Thermal aging of silica gels in water
158
Thermal aging of single-layer polymer light-emitting diodes composed of a carbazole and oxadiazole containing copolymer doped with singlet or triplet emitters
159
Thermal air oxidation of copper in an applied electric field
160
Thermal alteration of asteroids: evidence from meteorites
161
Thermal Alteration of Buried Bone
162
Thermal alteration of nontronite and montmorillonite: Implications for the martian surface
163
Thermal alteration of organic matter during a shrubland fire: A field study
164
Thermal amplitudes in DLCQ superstrings on pp-waves Original Research Article
165
Thermal analyses and simulations of the type A and type B Portevin–Le Chatelier effects in an Al–Mg alloy Original Research Article
166
Thermal analyses for the design of the ITER-NBI arc driven ion source
167
Thermal analyses of commercial magnesium stearate pseudopolymorphs
168
Thermal analyses of selected soil samples from the tombs at the Tianma-Qucun site, Shanxi, China
169
Thermal analyses to assess diffusion kinetics in the nano-sized interspaces between the growing crystals of a glass ceramics
170
Thermal Analysis — Fundamentals and Applications to Polymer Science, 2nd Edition, Edited by T. Hatakeyama and F.X. Quinn, Wiley, Chichester, 1999, viii+180 pages. ISBN 0-471-98362-4; £55.00
171
Thermal analysis — review and prospect
172
Thermal analysis (TG–DTA) and isotopic characterization (13C–15N) of humic acids from different origins
173
Thermal analysis and 454 pyrosequencing to evaluate the performance and mechanisms for deep stabilization and reduction of high-solid anaerobically digested sludge using biodrying process
174
Thermal analysis and alloy phase diagrams
175
Thermal analysis and annealing temperature dependence of electrical properties in Sn10Sb20Se70 glassy semiconductor
176
Thermal analysis and archaeological chronology: The ancient mortars of the site of Baradello (Como, Italy)
177
Thermal analysis and calorimetry
178
Thermal analysis and calorimetry beyond 2000: challenges and new routes
179
Thermal analysis and characterisation of cellulose grafted with acrylic monomers
180
Thermal analysis and characterisation of cellulose oxidised with sodium methaperiodate
181
Thermal analysis and design of a multi-layered rigidity tunable composite
182
Thermal analysis and design of a solar prototype for high-temperature processes
183
Thermal analysis and design of solid energy storage systems using a modified lumped capacitance method
184
Thermal analysis and design of the aerial camera’s primary optical system components
185
Thermal analysis and devolatilization kinetics of cotton stalk, sugar cane bagasse and shea meal under nitrogen and air atmospheres
186
Thermal analysis and exergy evaluation of packed bed thermal storage systems
187
Thermal analysis and FTIR studies of sewage sludge produced in treatment plants. The case of sludge in the city of Uberlândia-MG, Brazil
188
Thermal analysis and gas chromatography coupled mass spectrometry analyses of hydroxypropyl-β-cyclodextrin inclusion complex containing Lippia gracilis essential oil
189
Thermal analysis and gas chromatography coupled mass spectrometry analyses of hydroxypropyl-β-cyclodextrin inclusion complex containing Lippia gracilis essential oil
190
Thermal analysis and heat capacities of pyridinium and imidazolium ionic liquids
191
Thermal analysis and in vitro bioactivity of bioactive glass–alumina composites
192
Thermal analysis and infrared emission spectroscopic study of halloysite–potassium acetate intercalation compound
193
Thermal analysis and its application in evaluation of fluorinated polyimide membranes for gas separation
194
Thermal analysis and kinetic modeling of manganese oxide ore reduction using biomass straw as reductant
195
Thermal analysis and kinetics of biomass samples
196
Thermal Analysis and Kinetics of the Precipitation in Wrought Al-Mg, Al-Mg-Sc and Al-Mg-Sc-Me (Me=Zr, Ti) Alloys
197
Thermal analysis and measurement of a solar pond prototype to study the non-convective zone salt gradient stability
198
Thermal analysis and mechanism of α-Zn2SiO4:Mn2+ formation from zinc oxalate dihydrate under hydrothermal conditions
199
Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg
200
Thermal Analysis and Microstructural Evaluation of Inconel 738LC Superalloy Gas Turbine Blade
201
Thermal analysis and microstructure of the as-cast Ag–Bi–Cu alloys
202
Thermal analysis and modeling of a notebook computer battery
203
Thermal analysis and new insights to support decision making in retrofit and relaxation of heat exchanger networks
204
Thermal analysis and Ohmic loss estimation of polarizer for ITER ECCD system
205
Thermal analysis and optimization of a portable, edge-air-cooled PEFC stack
206
Thermal Analysis and Performance of Double Glazing Window with Semi-transparent Photovoltaic Module
207
Thermal analysis and performance optimization of a solar hot water plant with economic evaluation
208
Thermal analysis and performance optimization of a solar water heater flat plate collector: Application to Tétouan (Morocco)
209
Thermal analysis and performance study for multilayer perforated insulation material used in space
210
Thermal analysis and phase behavior of poly(styrene-co-4-vinylpyridine)/poly(styrene-co-acrylic acid) mixtures
211
Thermal analysis and phase diagram of the LiF–BiF3 system
212
Thermal analysis and phase evolution of ferroelectric PbTiO3 obtained from silicate and borate based glasses
213
Thermal analysis and physiological behavior of cellulose/pectin complex from Canna edulis Ker by-product
214
Thermal analysis and prediction of phase equilibria in the TiO2–Bi2O3 system
215
Thermal analysis and products distribution of dried sewage sludge pyrolysis
216
Thermal analysis and products distribution of dried sewage sludge pyrolysis
217
Thermal analysis and Raman scattering study on crystallization and structure of Agx(As0.4Se0.6)100−x glasses
218
Thermal analysis and Raman spectroscopic studies of crystallization in poly(ethylene 2,6-naphthalate)
219
Thermal analysis and safety information for metal nanopowders by DSC
220
Thermal analysis and solidification pathways of Mg–Al–Ca system alloys
221
Thermal analysis and solid-state 13C NMR study of crosslink in polyimides containing acetylene groups in the main chain
222
Thermal analysis and spectroscopic characteristics of tetrabutylammonium tetrachloroferrate(III)
223
Thermal analysis and temperature-programmed reduction studies of copper–zirconium and copper–zirconium–yttrium compounds
224
Thermal analysis and theoretical study of α-cyclodextrin azomethine [2]-rotaxane formation by semi-empirical method PM3
225
Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au–Ga–Sb system Original Research Article
226
Thermal analysis and vapour pressure of a new series of tungsten(VI) oxo-alkoxide-β-ketoesterate complex precursors for the chemical vapour deposition of tungsten oxide
227
Thermal analysis and vapour pressure of a new series of tungsten(VI) oxo-alkoxide-β-ketoesterate complex precursors for the chemical vapour deposition of tungsten oxide
228
Thermal analysis and vibrational spectroscopy of Mn(II)–urea–halide complexes: comparative study of the metal–ligand bond strength
229
Thermal Analysis and X-Ray Diffraction Studies of Bis (Benzoyl Acetonato) Copper (II) Complex
230
Thermal Analysis and X-Ray Diffraction Study on LiKSO4: A New Phase Transition
231
Thermal analysis as a screening technique for the characterization of babassu flour and its solid fractions after acid and enzymatic hydrolysis
232
Thermal analysis behavior of β- and γ-cyclodextrin inclusion complexes with capric and caprilic acid
233
Thermal analysis characterization of promoted vanadium oxide-based catalysts
234
Thermal Analysis Circular Couette Flow of Non-Newtonian Fluid with Viscous Dissipation
235
Thermal analysis during solidification of cast Al–Si alloys
236
Thermal analysis for folded solar array of spacecraft in orbit
237
Thermal analysis for ion-exchange column system
238
Thermal analysis for system uses solar energy as a pressure source for reverse osmosis (RO) water desalination
239
Thermal analysis for the characterisation of grounds used in works of art: preliminary results
240
Thermal analysis for the evaluation of the organic matter evolution during municipal solid waste aerobic composting process
241
Thermal analysis for transient radiative cooling of a conducting semitransparent layer of ceramic in high-temperature applications
242
Thermal analysis for wire scanners in the CSNS Linac
243
Thermal analysis for wire scanners in the CSNS Linac
244
Thermal analysis in coated cutting tools
245
Thermal analysis in cultural heritage safeguard: an application
246
Thermal analysis in fluidized bed drying of moist particles
247
Thermal analysis in matrix acidization
248
Thermal Analysis Investigation of Dapoxetine and Vardenafil Hydrochlorides using Molecular Orbital Calculations
249
Thermal analysis of a building brick containing phase change material
250
Thermal analysis of a calcium fructoborate sample
251
Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method
252
Thermal analysis of a combustion chamber surrounded by deposits in an HCCI engine
253
Thermal analysis of a constructal T-shaped porous fin with radiation effects
254
Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field
255
Thermal analysis of a diesel engine operating with diesel–biodiesel blends
256
Thermal analysis of a direct-gain room with shape-stabilized PCM plates
257
Thermal analysis of a double layer phase change material floor
258
Thermal analysis of a glass bending process
259
Thermal analysis of a hybrid solar energy saving system inside a greenhouse
260
Thermal analysis of a longitudinal fin with variable thermal properties by recursive formulation
261
Thermal analysis of a longitudinal trapezoidal fin with temperature-dependent thermal conductivity and heat transfer coefficient
262
Thermal analysis of a low flow piezoelectric air pump
263
Thermal analysis of a low temperature storage unit using phase change materials without refrigeration system
264
Thermal analysis of a magnesium oxide/water chemical heat pump for cogeneration
265
Thermal analysis of a metal foam subject to jet impingement
266
Thermal analysis of a natural circulation solar air heater with phase change material energy storage
267
Thermal analysis of a new concept in a household clothes tumbler dryer
268
Thermal analysis of a partially ceramic coated piston: Effect on cold start HC emission in a spark ignition engine
269
Thermal analysis of a polymorphic azo dye derived from 2-amino-5-nitrothiazole
270
Thermal analysis of a prototype to determine radiative cooling thermal balance
271
Thermal analysis of a rotary regenerator with fixed pressure drop or fixed pumping power
272
Thermal analysis of a run-capacitor single-phase induction motor
273
Thermal analysis of a simulated CANDU 37-element spent fuel bundle with air backfill
274
Thermal analysis of a simulated CANDU 37-element spent fuel bundle with air backfill Original Research Article
275
Thermal analysis of a solid brake disc
276
Thermal analysis of a solid polymer electrolyte and a subsequent electrochemical investigation of a lithium polymer battery
277
Thermal analysis of a stoneware panel covering radiators
278
Thermal analysis of a tunnel kiln used to produce roof tiles
279
Thermal analysis of a weir-type cascade solar still integrated with PCM storage Original Research Article
280
Thermal analysis of a wet-disk clutch subjected to a constant energy engagement
281
Thermal analysis of a wooden door system with integrated vacuum insulation panels
282
Thermal analysis of above-grade wall assembly with low emissivity materials and furred airspace
283
Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid
284
Thermal Analysis of Acrylonitrile/Acrylic Acid Copolymer Dendrigrafted with Citric Acid
285
Thermal analysis of activated carbons modified with silver metavanadate
286
Thermal analysis of adsorptive natural gas storages during dynamic charge phase at room temperature
287
Thermal analysis of air-cooled PEM fuel cells
288
Thermal analysis of AlGaN-GaN power HFETs
289
Thermal analysis of ammonium dinitramide (ADN)
290
Thermal analysis of ammonium trioxalatometallate complexes supported on titania and reducibility of their decomposition products
291
Thermal analysis of an annular fin with (a) simultaneously imposed base temperature and base heat flux and (b) fixed base and tip temperatures
292
Thermal analysis of an electrical machine taking into account the iron losses and the deep-bar effect
293
Thermal analysis of an enriched flame incinerator for aqueous residues
294
Thermal analysis of an SI engine piston using different combustion boundary condition treatments
295
Thermal analysis of azoic dyes: Part I. Non-isothermal decomposition kinetics of [4-(4-chlorobenzyloxy)-3-methylphenyl](p-tolyl)diazene in dynamic air atmosphere
296
Thermal analysis of bicomponent fibres
297
Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique
298
Thermal analysis of bis(tetraethylammonium) tetrachloroferrate(II)
299
Thermal analysis of bone cement polymerisation at the cement–bone interface
300
Thermal analysis of borogypsum and its effects on the physical properties of Portland cement
301
Thermal analysis of brominated pitch-based carbon fibers
302
Thermal analysis of buildings in a mathematical programming environment and applications
303
Thermal analysis of bulk carbon–carbon composite and friction products derived from it during simulated aircraft braking Original Research Article
304
Thermal analysis of carbon fiber polymer-matrix composites by electrical resistance measurement
305
Thermal analysis of carbon nanotube film irradiated by a pulsed laser
306
Thermal analysis of carbon-nanotube composites using a rigid-line inclusion model by the boundary integral equation method
307
Thermal analysis of cast-resin dry-type transformers
308
Thermal analysis of chemically and mechanically modified pectins
309
Thermal analysis of chitosan and its blends
310
Thermal Analysis of Chitosan Based Networks
311
Thermal analysis of closed feedwater heaters in nuclear power plants
312
Thermal Analysis of CNT-Based Nano-Composites by Element Free Galerkin Method
313
Thermal analysis of compact solar water heater under local climatic conditions
314
Thermal analysis of complex relaxation processes in poly(desaminotyrosyl-tyrosine arylates)
315
Thermal analysis of composite solar array subjected to space heat flux
316
Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method
317
Thermal analysis of cooling coils based on a dynamic model
318
Thermal analysis of cryopreserved Hypericum perforatum L. shoot tips: Cooling regime dependent dehydration and ice growth
319
Thermal analysis of cyclodextrins and their inclusion compounds
320
Thermal analysis of cylinder head carbon deposits from single cylinder diesel engine fueled by palm oil–diesel fuel emulsions
321
Thermal Analysis of Discrete Water supply in Domestic Hot Water Storage Tank
322
Thermal analysis of disulfonated poly(arylene ether sulfone) plasticized with poly(ethylene glycol) for membrane formation
323
Thermal analysis of dry sleeve bearings — a comparison between analytical, numerical (finite element) and experimental results
324
Thermal analysis of electron gun for travelling wave tubes
325
Thermal analysis of energy crops: Part I: The applicability of a macro-thermobalance for biomass studies
326
Thermal analysis of energy crops: Part I: The applicability of a macro-thermobalance for biomass studies
327
Thermal analysis of flaxseed (Linum usitatissimum) proteins by differential scanning calorimetry
328
Thermal Analysis of Fluid Flow with Heat Generation for Different Logarithmic Surfaces
329
Thermal analysis of fractures at Cerberus Fossae, Mars: Detection of air convection in the porous debris apron
330
Thermal Analysis of Friction Stir Welding with a Complex Curved Welding Seam
331
Thermal analysis of friction welding process in relation to the welding of YSZ-alumina composite and 6061 aluminum alloy
332
Thermal analysis of FRP chimneys using consistent laminated shell element
333
Thermal analysis of functionally graded coating AlSi alloy and steel pistons
334
Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
335
Thermal analysis of GFRP-reinforced continuous concrete decks subjected to top fire
336
Thermal Analysis of Grinding
337
Thermal analysis of ground dolomite, confirmation of results using an X-ray powder diffraction methodology
338
Thermal analysis of ground floor
339
Thermal analysis of halotrichites
340
Thermal analysis of heat pipes during thermal storage
341
Thermal analysis of high power GaN-based LEDs with ceramic package
342
Thermal analysis of high temperature ZrO2 insulation ceramic coatings on Ag tapes used as sheath of Bi-2212 superconducting materials using finite element method
343
Thermal analysis of high-frequency transformers using finite elements coupled with temperature rise method
344
Thermal analysis of hydration heat in concrete structures with pipe-cooling system
345
Thermal analysis of including phase change material in a domestic hot water cylinder
346
Thermal analysis of indirect geothermal district heating systems
347
Thermal Analysis of Induction and Synchronous Reluctance Motors
348
Thermal analysis of induction heating roll with heat pipes
349
Thermal analysis of insulations used in the building shell with the optimization approach and reduction of energy consumption
350
Thermal analysis of integrated spiral inductors
351
Thermal analysis of K(x)/La2O3, active catalysts for the abatement of diesel exhaust contaminants
352
Thermal analysis of kinetics of coal oxidation
353
Thermal analysis of La–Ba oxalate and role of γ-irradiation there on
354
Thermal analysis of large pore microporous zincophosphates
355
THERMAL ANALYSIS OF LASER HARDENING FOR DIFFERENT MOVING PATTERNS
356
Thermal analysis of layer formation in a stepless rapid prototyping process
357
Thermal analysis of layered FGM cylindrical plates subjected to sudden cooling process at one side – Comparison of two applied methods for problem solution
358
Thermal analysis of lead-acid battery pastes and active materials
359
Thermal analysis of LED array system with heat pipe
360
Thermal analysis of Li2O TeO2 glass
361
Thermal analysis of lithium-ion batteries
362
Thermal analysis of locomotive wheel-mounted brake disc
363
Thermal analysis of loop heat pipe used for high-power LED
364
Thermal analysis of manganese(II) complexes of general formula (Bu4N)2[MnBrnCl4−n]
365
Thermal analysis of manganese(II) complexes of general formula (Bu4N)2[MnBrnCl4−n]
366
Thermal analysis of manganese(II) complexes of general formula (Et4N)2[MnBrnCl4−n]
367
Thermal analysis of manganese(II) complexes of general formula (Et4N)2[MnBrnCl4−n]
368
Thermal analysis of mass concrete embedded with double-layer staggered heterogeneous cooling water pipes
369
Thermal analysis of ME—TVC+MEE desalination systems Original Research Article
370
Thermal analysis of micromirrors for high-energy applications
371
Thermal analysis of microstructural evolution of Al2O3 surface modified layers
372
Thermal analysis of microtextured journal bearing using non-Newtonian rheology of lubricant and JFO boundary conditions
373
Thermal analysis of microwave assisted bonding of poly(methyl methacrylate) substrates in microfluidic devices
374
Thermal analysis of mixtures of wheat flour and potato starches
375
Thermal analysis of monument patina containing hydrated calcium oxalates
376
Thermal analysis of multibarrier interior PM synchronous Machine using lumped parameter model
377
Thermal analysis of mumiyo, the legendary folk remedy from the Himalaya region
378
Thermal analysis of natural convection and radiation in porous fins
379
Thermal analysis of new ITER FW and divertor design during VDE energy deposition
380
Thermal Analysis of New Solar Air Heater with Inclined Perforated Absorber Plates: Experimental Study
381
Thermal analysis of non-equilibrium crystallization in undercooled liquid Pd–Cu–Ni–P
382
Thermal analysis of non-equilibrium crystallization in undercooled liquid Pd–Cu–Ni–P
383
Thermal analysis of optimally designed inclined micro heat pipes with axial solid wall conduction
384
Thermal Analysis of Organic Rankine Cycle Using Different Organic Fluids
385
Thermal analysis of orthotropic annular fins with contact resistance: A closed-form analytical solution
386
Thermal analysis of oxidised coals
387
Thermal analysis of paraffins by calorimetry
388
Thermal analysis of periodic sliding contact on a braking tribometer
389
Thermal analysis of phase change materials in the temperature range 120–150 °C
390
Thermal analysis of Pinus sylvestris L. wood samples treated with a new gel–mineral mixture of short- and long-term fire retardants
391
Thermal analysis of piston casting using 3-D finite element method
392
Thermal analysis of plasma facing components of SST-1 Tokamak by finite difference and finite element methods
393
Thermal analysis of plasma sprayed oxide coatings sealed with aluminium phosphate
394
Thermal analysis of plate condensers in presence of flow maldistribution
395
Thermal Analysis of Plunge Stage in Friction Stir Welding: Simulation and Experiment
396
Thermal analysis of poly(sodium 4-styrenesulfonate) intercalated graphite oxide composites
397
Thermal analysis of poly(vinylidene fluoride) film
398
Thermal analysis of polymers using virtual instruments: A tool for teaching and training
399
Thermal analysis of polysiloxanes, aromatic polyimide and their blends
400
Thermal analysis of power cable systems in a trench in multi-layered soil
401
Thermal analysis of power LED employing dual interface method and water flow as a cooling system
402
Thermal analysis of PVT-HEX system: Electricity Efficiency and Air Conditioning System
403
Thermal analysis of quinolinium tetrachloroferrate(III)
404
Thermal Analysis of Radiating Film Flow of Sodium Alginate using MWCNT Nanoparticles
405
Thermal analysis of rapid charging nickel/metal hydride batteries
406
Thermal analysis of RbI crystallization in the GeSe2–Sb2Se3–RbI system
407
Thermal analysis of reinforced concrete chimneys with fiberglass plastic liners in uncontrolled fires
408
Thermal analysis of reservoir structure versus capillary pumped loop
409
Thermal analysis of rotating system with porous plate using nanofluid
410
Thermal Analysis of Salt Gradient Solar Ponds with Theoretical and Experimental Concepts
411
Thermal analysis of shale oil using thermogravimetry and differential scanning calorimetry
412
Thermal analysis of shear induced crystallization by the shear flow thermal rheometer: isothermal crystallization of polypropylene
413
Thermal analysis of single-site polymers in binary blends of low-molecular-weight linear polyethylene and high-molecular-weight branched polyethylene
414
Thermal Analysis of Sintered Silver Nanoparticles Film
415
Thermal analysis of slurry ice production system using direct contact heat transfer of carbon dioxide and water mixture
416
Thermal analysis of solar parabolic trough with porous disc receiver
417
Thermal analysis of solar receiver pipes with superheated steam
418
Thermal analysis of solar thermal energy storage in a molten-salt thermocline
419
Thermal Analysis of Some Antidiabetic Pharmaceutical Compounds
420
Thermal analysis of some diclofenac salts with alkyl and alkylhydroxy amines
421
Thermal analysis of some natural polysaccharide materials by isoconversional method
422
Thermal analysis of sponge iron preheating using waste energy of EAF
423
Thermal analysis of stratum corneum of hairless mouse with attention to phase transitions near 35 °C
424
Thermal analysis of super insulated windows (numerical and experimental investigations)
425
Thermal analysis of supercritical CO2 power cycles: Assessment of their suitability to the forthcoming sodium fast reactors
426
Thermal Analysis of Superheater Platen Tubesin Boilers
427
Thermal Analysis of the Arc Welding Process: Part I. General Solutions
428
Thermal analysis of the CDF SVX II silicon vertex detector
429
Thermal analysis of the CDF SVX II silicon vertex detector
430
Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes
431
Thermal analysis of the defrost cycle in a domestic freezer
432
Thermal analysis of the designed CPC and its efficiency improvement by MPPT control
433
Thermal analysis of the droplet solidification in the PGSS-process
434
Thermal analysis of the effect of aging on the transformation behaviour of Ti–50.9at.% Ni
435
Thermal analysis of the effect of aging on the transformation behaviour of Ti–50.9at.% Ni
436
Thermal analysis of the evaporation of compounds used in aromatherapy using thermogravimetry
437
Thermal analysis of the first canted-undulator front-end components at SSRF
438
Thermal analysis of the first canted-undulator front-end components at SSRF
439
Thermal analysis of the girth weld of an elastomeric diaphragm tank
440
Thermal analysis of the grinding process
441
Thermal Analysis of the Heater-Induced Realization of the Tin Fixed Point
442
Thermal analysis of the heating system of the Small Bath in ancient Phaselis
443
Thermal analysis of the laser surface transformation hardening process
444
Thermal analysis of the melting process in a nuclear fuel rod
445
Thermal analysis of the melting process of poly(trimethylene terephthalate) using FTIR micro-spectroscopy
446
Thermal analysis of the Mg(OH)2 dehydroxylation process at high pressures
447
Thermal analysis of the Mirnov coils of Wendelstein 7-X
448
Thermal analysis of the Na2O-rich concentration region of the quasi-binary system Na2O–SiO2
449
Thermal analysis of the oxidation of natural graphite — effect of particle size
450
Thermal analysis of the oxidation of natural graphite: isothermal kinetic studies
451
Thermal analysis of the roll in the strip casting process
452
Thermal analysis of the thermal protection system for the re-entry vehicle Original Research Article
453
Thermal analysis of the tile impacted by concentrated heat loads caused by the lost of an upstream tile
454
Thermal analysis of the volume absorber in pulsed excimer laser calorimeters
455
Thermal analysis of thin film desalination systems
456
Thermal analysis of toroidal field coil in EAST at 3.7 K
457
Thermal analysis of tungsten coating on CuCrZr with different interlayers used as EAST divertor target materials
458
Thermal analysis of underground electrical power cables buried in non-homogeneous soils
459
Thermal analysis of vacancy defects in quenched tin bronze-α
460
Thermal analysis of vaulted roofs
461
Thermal Analysis of Vertical Flow of Steam Through a Porous Media
462
Thermal analysis of washer-on-disk wear test by micro-genetic algorithm
463
Thermal analysis of wood-based test cells
464
Thermal analysis of wood–cement panels: Heat flux and indoor temperature measurements in test cells
465
Thermal analysis of YB66 crystal of BL15XU at SPring-8 by finite element method
466
Thermal analysis of YB66 crystal of BL15XU at SPring-8 by finite element method
467
Thermal analysis of β-cyclodextrin/Berberine chloride inclusion compounds
468
Thermal analysis of β-cyclodextrin/Berberine chloride inclusion compounds
469
Thermal analysis of β-lactoglobulin complexes with pectins or carrageenan for production of stable biopolymer particles
470
Thermal analysis of γ-butyrolactone + 1 butyl-3-methyl-imidazolium ionic liquids mixtures
471
Thermal analysis on detailed 3D models of ITER thermal shield
472
Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes
473
Thermal analysis on metal-foam filled heat exchangers. Part II: Tube heat exchangers
474
Thermal analysis on NAC-STC spent fuel transport cask under different transport conditions
475
Thermal analysis on nanosized TiO2 prepared by hydrolysis
476
Thermal analysis on parchments I: DSC and TGA combined approach for heat damage assessment
477
Thermal analysis on piston of marine diesel engine
478
Thermal analysis on the cooling performance of a wet porous evaporative plate for building
479
Thermal analysis on the curie temperature of nanocrystalline Ni produced by ball milling
480
Thermal analysis on the degradation of poly-silicon TFTs under AC stress
481
Thermal analysis on the process of microwave-assisted biodiesel production
482
Thermal analysis on two wheeler piston with different materials by using FEA method
483
THERMAL ANALYSIS ON VARIABLE THICKNESS ABSORBER PLATE FIN IN FLATPLATE SOLAR COLLECTORS USING DIFFERENTIAL TRANSFORM METHOD
484
THERMAL ANALYSIS STUDIES ON MULTIMETAL SULPHIDES: CHARACTERISATION, ROASTING AND LEACHING
485
THERMAL ANALYSIS STUDIES ON MULTIMETAL SULPHIDES: CHARACTERISATION, ROASTING AND LEACHING
486
Thermal analysis study of 5,10,15,20-tetrakis (methoxyphenyl) porphyrins and their nickel complexes
487
Thermal Analysis Study of Antihypertensive Drugs Telmisartan and Cilazapril
488
Thermal analysis study on vaporization of some analgesics. Acetanilide and derivatives
489
Thermal analysis, fragility and viscosity of Au-based metallic glasses
490
Thermal analysis, spectra and laser properties of a new Yb3+-doped multicomponential tellurite-based glass
491
Thermal analysis, X-ray and electron diffraction studies on crystalline phase transitions in solvent-treated poly(hexamethylene terephthalate)
492
Thermal analysis/mass spectrometry as a tool for studying environmental pollution by coal gasification
493
Thermal Analysis: A Complementary Method to Study the Shurijeh Clay Minerals
494
Thermal analysis: a unique method to estimate the number of substituents in fullerene derivatives
495
Thermal analysis: the next two decades
496
Thermal analysis–mass spectroscopy coupling as a powerful technique to study the growth of carbon nanotubes from benzene
497
Thermal analytical investigations of the magnesium alloys AM 60 and AZ 91 including the melting range
498
Thermal anchoring of conduction-cooled current leads for superconductivity applications near liquid nitrogen temperature
499
Thermal anchoring of wires in large scale superconducting coil test experiment
500
Thermal and 31P-NMR studies to elucidate sumatriptan succinate entrapment behavior in Phosphatidylcholine/Cholesterol liposomes. Comparative 31P-NMR analysis on negatively and positively-charged liposomes
501
Thermal and ablative properties of low temperature carbon fiber–phenol formaldehyde resin composites Original Research Article
502
Thermal and acoustic environmental requirements for green buildings in Malaysia
503
Thermal and acoustic properties of aluminium foams manufactured by the infiltration process
504
Thermal and adsorbate effects on the activity and morphology of size-selected Pdn/TiO2 model catalysts
505
Thermal and air flow characteristics in a deep pedestrian canyon under hot weather conditions
506
Thermal and antimicrobial properties of chitosan–nanocellulose films for extending shelf life of ground meat
507
Thermal and Au(I)-Catalyzed Intramolecular [4+2] Cycloaddition of Aryl-Substituted 1,6-Diynes for the Synthesis of Biaryl Compounds
508
Thermal and behavioral modeling of occupant-controlled heating, ventilating and air conditioning systems
509
Thermal and bio-disintegration properties of poly(lactic acid)/natural rubber/organoclay nanocomposites
510
Thermal and caloric equations of state for stable and metastable Lennard-Jones fluids: I. Molecular-dynamics simulations
511
Thermal and catalysed halogenation in combustion reactions
512
Thermal and catalytic conversion of asphaltenes
513
Thermal and catalytic cracking of a LDPE–EVA copolymer mixture
514
Thermal and catalytic cracking of polyethylene under mild conditions
515
Thermal and catalytic decomposition behavior of PVC mixed plastic waste with petroleum residue
516
Thermal and catalytic decomposition of aqueous ethylene glycol mixtures by film boiling
517
Thermal and catalytic decomposition of mixed plastics
518
Thermal and catalytic decomposition of polyethylene and polypropylene
519
Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes
520
Thermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes
521
Thermal and catalytic degradation of pyrolytic waxy oil in a plug flow reactor
522
Thermal and catalytic degradation of pyrolytic waxy oil in a plug flow reactor
523
Thermal and catalytic degradation study of polyethylene and investigation the catalytic effect of X-Zeolite and Silica-Alumina on degradation kinetic
524
Thermal and catalytic dry reforming and cracking of ethanol for hydrogen and carbon nanofilamentsʹ production
525
Thermal and catalytic formation of radicals during autoxidation
526
Thermal and catalytic isomerization of exomethylenecycloheptadienes. Experimental and theoretical studies
527
Thermal and catalytic oligomerisation of fatty acids Original Research Article
528
Thermal and catalytic pyrolysis of crosslinked polyethylene
529
Thermal and catalytic pyrolysis of Karanja seed to produce liquid fuel
530
Thermal and catalytic reactions of ethyl diazopyruvate with [60]fullerene
531
Thermal and chemical activation of fly-ash: Electrical response during early hydration
532
Thermal and chemical aging of model three-way catalyst Pd/Al2O3 and its impact on the conversion of CNG vehicle exhaust
533
Thermal and chemical approaches for oxygen catalytic recombination evaluation on ceramic materials at high temperature
534
Thermal and chemical behaviour of different glasses containing steel fly ash and their transformation into glass-ceramics
535
Thermal and chemical effects of hydrogen addition on catalytic micro-combustion of methane–air
536
Thermal and chemical equilibration of hadronic matter Original Research Article
537
Thermal and chemical events in the decomposition course of manganese compounds
538
Thermal and chemical evidence for rapid water exchange across the sediment-water interface by bioirrigation in the Indian River Lagoon, Florida
539
Thermal and chemical expansion of mixed conducting La0.5Sr0.5Fe1−xCoxO3−δ materials
540
Thermal and chemical expansion properties of La0.2Sr0.8Fe0.55Ti0.45O3−x
541
Thermal and chemical induced expansion of La0.3Sr0.7(Fe,Ga)O3−δ ceramics
542
Thermal and chemical kinetic characterization of multiphase and multicomponent substances by laser heating
543
Thermal and chemical lattice expansibility of La0.6Sr0.4Co1 − yFeyO3 − δ (y = 0.2, 0.4, 0.6 and 0.8)
544
Thermal and chemical loading effects in non selective Si/SiGe epitaxy
545
Thermal and chemical modification of bentonite for adsorption of an anionic dye
546
Thermal and chemical modification of titanium–aluminum–vanadium implant materials: effects on surface properties, glycoprotein adsorption, and MG63 cell attachment
547
Thermal and chemical properties of diopside-wollastonite glass-ceramics in the SiO2–CaO–MgO system from raw materials
548
Thermal and chemical reaction performance analyses of steam methane reforming in porous media solar thermochemical reactor
549
Thermal and chemical stabilities of arsenic in three Chinese coals
550
Thermal and Chemical Stability of a Spin-Coated Epoxy Adhesive for the Fabrication of a Polymer Optical Waveguide
551
Thermal and chemical stability of Cu–Zn–Cr-LDHs prepared by accelerated carbonation
552
Thermal and chemical stability of epitaxial Fe films grown on the Ti-stabilized Al(1 0 0) surface
553
Thermal and chemical stability of fluorohydroxyapatite ceramics with different fluorine contents
554
Thermal and chemical structure of the Iceland plume
555
Thermal and chemical treatment of ITO substrates for improvement of OLED performance
556
Thermal and chemical treatments of montmorillonite clay
557
Thermal and chemical variations in subcrustal cratonic lithosphere: evidence from crustal isostasy
558
Thermal and cold neutron phase-contrast radiography
559
Thermal and complex impedance analysis of amorphous and crystalline lithium salt mixtures
560
Thermal and compositional evolution of the martian mantle: Effects of phase transitions and melting
561
Thermal and compositional evolution of the martian mantle: Effects of water
562
Thermal and compositional stratification of the inner core
563
Thermal and concentration fields of burner-attached jet flames in cross flow
564
Thermal and corrosion properties of silicon nitride for copper die casting components
565
Thermal and crystalline behaviour of silk fiborin/nylon 66 blend films
566
Thermal and crystallisation behaviours of blends of polyamide 12 with styrene–ethylene/butylene–styrene rubbers
567
Thermal and crystallization behavior of hydrogen-bonded miscible blend of poly(3-hydroxybutyrate) and enzymatically polymerized polyphenol
568
Thermal and crystallization behavior of zirconia precursor used in the solution precursor plasma spray process
569
Thermal and crystallization characteristics of poly(trimethylene terephthalate)/poly(ethylene naphthalate) blends
570
Thermal and crystallization kinetics of yttrium and lanthanum calcium silicate glass sealants for solid oxide fuel cells
571
Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments
572
Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office
573
Thermal and devitrification behavior of (2.5−x)CaO·(x/3)In2O3·2SiO2 glasses
574
Thermal and devitrification behavior of CaO–Ga2O3–SiO2 glasses
575
Thermal and dielectric investigations on the blends of κ-carrageenan and nano-structured polyaniline
576
Thermal and dielectric properties and curing kinetics of nanomaterials formed from poss-epoxy and meta-phenylenediamine
577
Thermal and dielectric properties of the AlN particles reinforced linear low-density polyethylene composites
578
Thermal and dielectric studies of polymer electrolyte based on P(ECH-EO)
579
Thermal and diffusion processes in laser-induced stress relaxation and reshaping of cartilage
580
Thermal and dissipative effects accompanying Lüders band propagation
581
Thermal and dissipative effects accompanying Lüders band propagation
582
Thermal and dynamic mechanical analyses on Bi0.5Na0.5TiO3–BaTiO3 ceramics synthesized with citrate method
583
Thermal and dynamic mechanical analysis of polyethylene modified with crude palm oil
584
Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres
585
Thermal and dynamic mechanical analysis of PVA/MC blend hydrogels
586
Thermal and dynamic mechanical analysis on metallocene ULDPE/PP blends to optimize impact properties
587
Thermal and dynamic mechanical behavior of polyurethanes based on diisocyanates and diethanolamine derivatives with mesogenic groups in side chain
588
Thermal and dynamic mechanical characterization of thermoplastic polyurethane/organoclay nanocomposites prepared by melt compounding
589
Thermal and dynamic mechanical properties of binary blends of bacterial copolyester poly(hydroxybutyrate-co-hydroxyvalerate) (PHBHV) with poly(2-hydroxyethylmethacrylate) (PHEMA)
590
Thermal and dynamic mechanical properties of frozen wheat flour dough added with selected food gums
591
Thermal and dynamic mechanical properties of metallocene polyethylene
592
Thermal and dynamic rheology of insoluble starch from basmati rice
593
Thermal and Dynamical Particle Creation in a Curved Geometry
594
Thermal and economic comparisons of solar heating systems with seasonal storage used in building heating
595
Thermal and economic evaluation of heat recovery measures for indoor ice rinks
596
Thermal and economic optimization of an intercooler of three-stage compressor
597
Thermal and economical analysis of a central solar heating system with underground seasonal storage in Turkey
598
Thermal and economical optimization of air conditioning units with vapor compression refrigeration system
599
Thermal and electric properties of CeO2 nanoparticles dispersed in polyethylene oxide:NH4ClO4 complex
600
Thermal and electric transport properties of (60−x)V2O5–xAs2O3–20Fe2O3–10CaO–10Li2O unconventional glassy system
601
Thermal and electrical behavior of γ-Bi2VO5.5 and f-Bi2VO5 oxides obtained from mechanochemically activated precursors
602
Thermal and Electrical Characterization of (1-x)Na2O-xAl2O3-P2O5 System Glasses
603
Thermal and electrical conduction behavior of alumina and multiwalled carbon nanotube incorporated poly(dimethyl siloxane)
604
Thermal and electrical conduction in the compaction direction of exfoliated graphite and their relation to the structure
605
Thermal and electrical conduction properties of vertically aligned carbon nanotubes produced by water-assisted chemical vapor deposition Original Research Article
606
Thermal and electrical conductivities of silver–indium–tin alloys Original Research Article
607
Thermal and electrical conductivity and magnetoresistance of graphite films prepared from aromatic polyimide films
608
Thermal and electrical conductivity of Aluminium Nitride nanofluids
609
Thermal and electrical conductivity of array-spun multi-walled carbon nanotube yarns Original Research Article
610
Thermal and electrical conductivity of poly(l-lactide)/multiwalled carbon nanotube nanocomposites
611
Thermal and electrical conductivity of single- and multi-walled carbon nanotube-epoxy composites
612
Thermal and electrical conductivity of Sn–Ag–In alloys
613
Thermal and electrical conductivity of solid iron and iron–silicon mixtures at Earthʹs core conditions
614
Thermal and electrical conductivity of tall, vertically aligned carbon nanotube arrays Original Research Article
615
Thermal and electrical energy management in a PEMFC stack – An analytical approach
616
Thermal and electrical experimental characterisation of a 1 kW PEM fuel cell stack
617
Thermal and electrical performance of a water-surface floating PV integrated with a water-saturated MEPCM layer
618
Thermal and electrical performance of an alkaline fuel cell
619
Thermal and Electrical Properties of a Suspended Nanoscale Thin Film
620
Thermal and electrical properties of Czochralski grown GeSi single crystals
621
Thermal and electrical properties of graphene/carbon nanotube aerogels
622
Thermal and electrical properties of hot-pressed short pitch-based carbon fiber-reinforced ZrB2–SiC matrix composites
623
Thermal and electrical properties of mixed alkali in Li2O–Na2O–WO3–P2O5 glasses
624
Thermal and electrical properties of poly(3-alkylthiophene)s prepared by the oxidative polymerization
625
Thermal and electrical properties of poly(l-lactide)-graft-multiwalled carbon nanotube composites
626
Thermal and electrical properties of rare-earth co-doped ceria ceramics
627
Thermal and electrical properties of solid polymer electrolyte PEO9 Mg(ClO4)2 incorporating nano-porous Al2O3 filler
628
Thermal and electrical properties of starch–graphene oxide nanocomposites improved by photochemical treatment
629
Thermal and Electrical Properties of Titanium Between 300 and 1900 K
630
Thermal and electrical properties of W–Cu composite produced by activated sintering
631
Thermal and electrical switching studies on Ge20Se80 − xBix (1 ≤ x ≤ 13) ternary chalcogenide glassy system
632
Thermal and electrical transport properties of a self-organized carbon nanotube pellet
633
Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test
634
Thermal and electrochemical characterization of MCMB/LiNi1/3Co1/3Mn1/3O2 using LiBoB as an electrolyte additive
635
Thermal and Electrochemical Investigation of Neem Oil based Novel Polyurethane/Polyvinylpyrrolidone Solid Polymer Electrolytes
636
Thermal and electrochemical model of internal reforming solid oxide fuel cells with tubular geometry
637
Thermal and electrochemical stability of cathode materials in solid polymer electrolyte
638
Thermal and electrochemical stability of tungsten carbide catalyst supports
639
Thermal and electrochemical studies of carbons for Li-ion batteries: 1. Thermal analysis of petroleum and pitch cokes
640
Thermal and electrochemical studies of carbons for Li-ion batteries: 2. Correlation of active sites and irreversible capacity loss
641
Thermal and electromagnetic analysis of an electromagnetic launcher
642
Thermal and electromigration effects of electropulsing on dynamic recrystallization in Mg–3Al–1Zn alloy
643
Thermal and electronic charge transport in bulk nanostructured Zr0.25Hf0.75NiSn composites with full-Heusler inclusions
644
Thermal and electronic transport of semiconducting nanoparticle-functionalized carbon nanotubes
645
Thermal and electro‑optic properties of graphene oxide‑doped hexylcyanobiphenyl liquid crystal
646
Thermal and emission characteristics of a turbulent swirling inverse diffusion flame
647
Thermal and enzymatic recovering of proteins from untanned leather waste
648
Thermal and enzymatic treatments for the release of free ferulic acid from maize bran
649
Thermal and exergetic analysis of Metal Foam-enhanced Cascaded Thermal Energy Storage (MF-CTES)
650
Thermal and exergy analysis of solar air collectors with passive augmentation techniques
651
Thermal and fire risk analysis of typical insulation material in a high elevation area: Influence of sidewalls, dimension and pressure
652
Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites
653
Thermal and flow analysis of a heated electronic component
654
Thermal and flow analysis of microchannel heat sink (MCHS) cooled by Cu–water nanofluid using porous media approach and least square method
655
Thermal and flow behavior of ice slurries in a vertical rectangular channel. Part I: Local distribution measurements in adiabatic flow
656
Thermal and flow behavior of ice slurries in a vertical rectangular channel—Part II. Forced convective melting heat transfer
657
Thermal and flow behaviors in heat transportation container using phase change material
658
Thermal and flow characteristics of the condensation of R404A refrigerant in pipe minichannels
659
Thermal and freeze—thaw properties of starch of chickpea (Cicer arietinum)
660
THERMAL AND FREEZING STRAINS ON A FACE OF WET SANDSTONE SAMPLES UNDER A SUBZERO TEMPERATURE CYCLE
661
Thermal and FTIR analysis of the miscibility and phase behaviour of poly (isobutyl methacrylate-co-4-vinylpyridine)/poly (styrene-co-acrylic acid) systems
662
Thermal and gas analyses of the reaction between iron carbide and steam with hydrogen generation at 573 K
663
Thermal and gas-sensing properties of planar-type micro gas sensor
664
Thermal and geochemical characterization of Lokpanta oil shales, Nigeria
665
Thermal and geochemical constraints on the ‘deep’ magmatic structure of Mt. Vesuvius
666
Thermal and geochemical investigation of Seyitomer oil shale
667
Thermal and geochemical structure of the Uenotai geothermal system, Japan
668
Thermal and geodynamic contributions to the elevation of the Altiplano–Puna plateau
669
Thermal and Grain-Structure Simulation in a Land-Based Turbine Blade Directionally Solidified with the Liquid Metal Cooling Process
670
Thermal and hadrochemical equilibration in nucleus-nucleus collisions at the SPS
671
Thermal and haline variability over the central Bering Sea shelf: Seasonal and interannual perspectives
672
Thermal and heat transfer behaviors of an inverse diffusion flame with induced swirl
673
Thermal and heat transfer characteristics in a latent heat storage system using lauric acid
674
Thermal and high hydrostatic pressure inactivation of myrosinase from green cabbage: A kinetic study
675
Thermal and high pressure high temperature processes result in distinctly different pectin non-enzymatic conversions
676
Thermal and high pressure stability of tomato lipoxygenase and hydroperoxide lyase Original Research Article
677
Thermal and hydraulic analysis of a brazed aluminum evaporator
678
Thermal and hydraulic analysis of multilayered asphalt pavements as active solar collectors
679
Thermal and hydraulic analysis of the cooling system for the ITER equatorial port plugs
680
Thermal and hydraulic analysis on the flow around the motor in semi-hermetic twin screw refrigeration compressors
681
Thermal and hydraulic characteristics of nanofluid flow in a helically coiled tube heat exchanger
682
Thermal and hydraulic characteristics of turbulent nanofluids flow in a rib–groove channel
683
Thermal and hydraulic performance of a graphite block heat exchanger
684
Thermal and hydraulic performance of a modified two-stage evaporative cooler
685
Thermal and hydraulic performance of sinusoidal corrugated plate heat exchanger for low temperature lift heat pump
686
Thermal and hydraulic performance of the helium-operated shutter protecting the first mirror of the ITER diagnostics
687
Thermal and hydrodynamic analysis of a fractal microchannel network
688
Thermal and hydrodynamic analysis of microchannel heat sinks: A review
689
Thermal and hydrodynamic characteristics of supercritical CO2 natural circulation in closed loops
690
Thermal and hydrodynamic considerations of ice slurry in heat exchangers
691
Thermal and hydrothermal influence of magmatic emissions on embedding clays of the Upper Cretaceous of the Tunisian eastern margin and the Pelagic Sea
692
Thermal and hygric properties of Portland cement mortar after high-temperature exposure combined with compressive stress
693
Thermal and impact metamorphism on the HED parent asteroid
694
Thermal and infrared characterization of new barium-iron-metaphosphate glasses
695
Thermal and ionic conductivity studies of plasticized PMMA/PVdF blend polymer electrolytes
696
Thermal and IR properties of Mg(II) complexes with heterocyclic ligands
697
Thermal and irradiation induced interdiffusion in magnetite thin films grown on magnesium oxide (0 0 1) substrates
698
Thermal and kinetic analyses of pure and oxidized bitumens
699
Thermal and kinetic analysis of ortho-palladated complexes with pyridines
700
Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis
701
Thermal and kinetic characterization of a toughened epoxy resin reinforced with carbon fibers
702
Thermal and kinetic study of dehydration and decomposition processes for copper intercalated γ-zirconium and γ-titanium phosphates
703
Thermal and light control of the chiral order of azopolymers
704
Thermal- and light-induced nanocluster formation in silver–mesogenic cyanophenyl condensed films
705
Thermal and luminescence characterization of lanthanide 2,6-naphthalenedicarboxylates series
706
Thermal and luminescence characterization of lanthanide 2,6-naphthalenedicarboxylates series
707
Thermal and luminescent properties of polymeric acidic organophosphorus complexes of Eu(III) and Tb(III) undoped and doped with 1,10-phenanthroline
708
Thermal and luminous investigations of a pcLED based refrigerating liquid prototype
709
Thermal and magnetic behavior of a nanocrystalline Fe(Ni, Co) based alloy
710
Thermal and Magnetic Characteristics of Cellulose Acetate- Fe3O4
711
Thermal and Magnetic Characteristics of Cellulose Acetate-Fe3O4
712
Thermal and magnetic evolution of the Earth’s core
713
Thermal and magnetic properties of (ErxY1−x)3Al5O12 for application to ADRs
714
Thermal and magnetic properties of (ErxY1−x)3Al5O12 for application to ADRs
715
Thermal and magnetic properties of a nanotube with spin- 1/2 core and spin- 3/2 shell structure
716
Thermal and magnetothermal properties of La0.5Pr0.5Mn2Si2
717
Thermal and mass spectroscopic characterization of a sulphur-containing bacterial melanin from Bacillus subtilis
718
THERMAL AND MECHANICAL ANALYSIS OF GRAIN STORAGE SILOS UNDER FORCED AERATION CONDITIONS USING ADVANCED MODELLING METHODS
719
Thermal and mechanical analysis of ITER-relevant LHCD antenna elements
720
Thermal and mechanical analysis of material response to non-steady ramp and steady shock wave loading
721
Thermal and mechanical analysis of the EAST plasma facing components
722
Thermal and mechanical analysis of the ITER plasma-position reflectometry antennas
723
Thermal and mechanical analysis of Wendelstein 7-X thermal shield
724
Thermal and mechanical aspect of entropy-exergy relationship
725
Thermal and mechanical behavior of laminated protein films Original Research Article
726
Thermal and mechanical behaviors of Cu–Zr amorphous alloys
727
Thermal and mechanical behaviour of diagnostic windows subjected to intense heat fluxes
728
Thermal and mechanical behaviour of grey cast iron and ductile iron castings using magnetic molding and lost foam processes
729
Thermal and mechanical behaviour of the C60·2S8 monoclinic compound
730
Thermal and mechanical behaviour of the reduced-activation-ferritic-martensitic steel EUROFER
731
Thermal and mechanical characteristics of an instrumented capsule for a material irradiation test
732
Thermal and mechanical characteristics of an instrumented capsule for a material irradiation test Original Research Article
733
Thermal and mechanical characteristics of poly( -lactic acid) nanocomposite scaffold
734
Thermal and mechanical characterization of cellulosic derivatives-based oleogels potentially applicable as bio-lubricating greases: Influence of ethyl cellulose molecular weight
735
Thermal and mechanical characterization of poly(vinyl chloride)-b-poly(butyl acrylate)-b-poly(vinyl chloride) obtained by single electron transfer – degenerative chain transfer living radical polymerization in water
736
Thermal and mechanical characterizations of a Zr-based bulk metallic glass composite toughened by in-situ precipitated Ta-rich particles
737
Thermal and mechanical damage of GaAs in picosecond regime
738
Thermal and mechanical fatigue of a PA66/glass fibers composite material
739
Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders Original Research Article
740
Thermal and mechanical finite element modeling of laser-generated ultrasound in coating–substrate system
741
THERMAL AND MECHANICAL INSTABILITY OF AN IMPERFECT SHALLOW SPHERICAL CAP
742
Thermal and mechanical instability of functionally graded truncated conical shells
743
Thermal and mechanical intensification of essential oil extraction from orange peel via instant autovaporization
744
Thermal and mechanical interfacial properties of epoxy composites based on functionalized carbon nanotubes
745
Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys
746
Thermal and mechanical performance of sealed, gas-filled, flat plate solar collectors
747
Thermal and mechanical properties of (U,Er)O2
748
Thermal and mechanical properties of 19th century fireproof flooring systems at elevated temperatures
749
Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes
750
Thermal and mechanical properties of Al/Al2O3 composites at elevated temperatures
751
Thermal and mechanical properties of alkyl-functionalized nanodiamond composites
752
Thermal and mechanical properties of amorphous Zr65Al7.5Ni10Cu12.5Ag5 alloy containing nanocrystalline compound particles
753
Thermal and mechanical properties of amorphous Zr65Al7.5Ni10Cu12.5Ag5 alloy containing nanocrystalline compound particles
754
Thermal and mechanical properties of beryllium pebbles
755
Thermal and mechanical properties of biodegradable composites of poly(propylene carbonate) and starch–poly(methyl acrylate) graft copolymer
756
Thermal and mechanical properties of bio-nanocomposites reinforced by Luffa cylindrica cellulose nanocrystals
757
Thermal and Mechanical Properties of Borosilicate Glass to Kovar Alloys Joint
758
Thermal and mechanical properties of cordierite, mullite and steatite produced by plasma spraying
759
Thermal and mechanical properties of crack-designed thick lanthanum zirconate coatings
760
Thermal and mechanical properties of fatty acid starch esters
761
Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures
762
Thermal and mechanical properties of glass reinforced soy-based polyurethane composites
763
Thermal and Mechanical Properties of Hybrid Composite Strengthened by Carbon Fibers/Aramid Fibers
764
Thermal and mechanical properties of in situ polymerized PS/EPDM blends
765
Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropylene
766
Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites
767
Thermal and mechanical properties of liquid crystalline epoxy resins as a function of mesogen concentration
768
Thermal and mechanical properties of microcellular thermoplastic SBS/PS/SBR blend: effect of crosslinking
769
Thermal and mechanical properties of phosphorylated multiwalled carbon nanotube/polyvinyl chloride composites Original Research Article
770
Thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites
771
Thermal and mechanical properties of polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites
772
Thermal and mechanical properties of polypropylene in the thermoplastic elastomeric state
773
Thermal and mechanical properties of polypropylene/titanium dioxide nanocomposite fibers
774
Thermal and mechanical properties of rare earth aluminate and low-silica aluminosilicate optical glasses
775
Thermal and mechanical properties of SEBS-g-MA based inorganic composite materials
776
Thermal and mechanical properties of simultaneous and sequential full-interpenetrating polymer networks
777
Thermal and mechanical properties of simultaneous and sequential full-interpenetrating polymer networks
778
Thermal and mechanical properties of single-walled carbon nanotube bundle-reinforced epoxy nanocomposites: the role of solvent for nanotube dispersion
779
Thermal and mechanical properties of single-walled carbon nanotubes–polypropylene composites prepared by melt processing Original Research Article
780
Thermal and mechanical properties of sintered LaPO4-Al2O3 composites
781
Thermal and mechanical properties of sintered machinable LaPO4–ZrO2 composites
782
Thermal and mechanical properties of soy protein films processed at different pH by compression Original Research Article
783
Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil
784
Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil
785
Thermal and mechanical properties of the ac¸aı´ fiber/natural rubber composites
786
Thermal and mechanical properties of uranium nitride prepared by SPS technique
787
Thermal and mechanical properties of waste grass broom fiber-reinforced polyester composites
788
Thermal and mechanical stresses in transversely isotropic coatings
789
Thermal and mechanical study from granite and marble industry reject
790
Thermal and mechanically activated decomposition of LiAlH4
791
Thermal and melting heat transfer characteristics in a latent heat storage system using mikro
792
Thermal and membrane processe economics: Optimized selection for seawater desalination Original Research Article
793
Thermal and membrane systems for combined desalination plants Original Research Article
794
Thermal and metallographic characteristics of the Al–20% Si high-pressure die-casting alloy for monolithic cylinder blocks
795
Thermal and microchemical investigation of automotive brake pad wear residues
796
Thermal and microchemical investigation of Phoenician–Punic mortars used for lining cisterns at Tharros (western Sardinia, Italy)
797
Thermal and microscope analysis as a tool in the characterisation of ancient papyri
798
Thermal and microstructural characterization and crystallization kinetic studies in the TeO2−B2O3 system
799
Thermal and microstructural characterization of biodegradable films prepared by extrusion–calendering process
800
Thermal and microstructural effects of welding metallic glasses by self-propagating reactions in multilayer foils
801
Thermal and microstructural effects of welding metallic glasses by self-propagating reactions in multilayer foils Original Research Article
802
Thermal and microstructural evolution under ageing of several high-temperature Ni–Mn–Ga alloys
803
Thermal and microstructural stability of a powdered gum derived from Pereskia aculeata Miller leaves
804
Thermal and microstructural stability of the soft magnetic Fe60Co18Nb6B15Cu1 alloy
805
Thermal and microwave assisted polymerization of vinyl acetate catalyzed by cyclometalated ruthenium (II) complexes
806
Thermal and microwave assisted reactions of 2,5-disubstituted thienosultines with [60]fullerene: non-Kekulé biradicals and self-sensitized oxygenation of the cycloadduct
807
Thermal and microwave hydrolysis of organotrifluoroborates mediated by alumina
808
Thermal- and microwave-assisted hydrogenation of electron-deficient alkenes using a polymer-supported hydrogen donor
809
Thermal and microwave-assisted N-formylation using solid-supported reagents
810
Thermal and Mn diffusion behaviors of CoNbZr-based spin valves with nano oxide layers
811
Thermal and Moisture Diffusion Properties of Amaranth Seeds
812
Thermal and moisture parameters of a dry coarse-grained fill or drainage layer
813
Thermal and morphological analysis of thermoplastic polyurethane–clay nanocomposites: Comparison of efficacy of dual modified laponite vs. commercial montmorillonites
814
Thermal and morphological characteristics of polypropylene/smectic polyester blends
815
Thermal and morphological characterization of conducting, polyaniline/polystyrene blends
816
Thermal and morphological properties of main chain liquid crystalline polymers
817
Thermal and Morphological Properties of Thermoplastic
818
Thermal and morphological studies of binary and ternary composites of poly(vinylalcohol) with alumina and zirconia
819
Thermal and morphological studies on ethylene-vinyl acetate copolymer–polyaniline blends
820
Thermal and morphological studies on isotactic polypropylene containing p-phenylen-bis-maleamic acid grafted groups
821
Thermal and neutron tests of multilayered dielectric mirrors
822
Thermal and NMR characterization on trans-esterification-induced phase changes in blends of poly(ethylene-2,6-naphthalate) with poly(pentylene terephthalate)
823
Thermal and non-Newtonian analysis on mixed liquid–solid lubrication
824
Thermal and non-thermal emission from clusters Original Research Article
825
Thermal and non-thermal fragmentation of xenon cluster ions
826
Thermal and non-thermal particle interaction with the LHCD launchers in Tore Supra
827
Thermal and operational stabilities of Hansenula polymorpha alcohol oxidase
828
Thermal and optical characterization of push–pull azo dye-doped poly(methylmethacrylate) thin film as short wavelength optical recording media
829
Thermal and optical characterization of push–pull azo dye-doped poly(methylmethacrylate) thin film as short wavelength optical recording media
830
Thermal and optical evolution of gas in vacuum glazing
831
Thermal and optical investigation of EuF3-doped lead fluorogermanate glasses
832
Thermal and optical properties of Cd1-xZnxS thin films by photoacoustics
833
Thermal and optical properties of chalcohalide glass
834
Thermal and optical properties of CuO–BaO–B2O3–P2O5 glasses
835
Thermal and optical properties of diode side-pumped solid state laser rods
836
Thermal and optical properties of electron beam irradiated cellulose triacetate
837
Thermal and optical properties of Er3+-doped oxyfluorotellurite glasses
838
Thermal and optical properties of GeS2-based chalcogenide glasses
839
Thermal and optical properties of hyperbranched fluorinated polyimide/mesoporous SiO2 nanocomposites exhibiting high transparency and reduced thermo-optical coefficients
840
Thermal and optical properties of silver–poly(methylmethacrylate) nanocomposites prepared by in-situ radical polymerization
841
Thermal and optical properties of TeO2–BaO–SrO–Nb2O5 based glasses: New broadband Raman gain media
842
Thermal and optical properties of TeO2–ZnO–BaO glasses
843
Thermal and optical properties of the ferroelectric (C3N2H5)5Bi2Cl11 crystal
844
Thermal and optical properties of the Ga–Ge–Sb–Se glasses
845
Thermal and optical properties of Tm3+: Li6Gd(BO3)3 crystal: A potential candidate for 1.83 μm lasers
846
Thermal and optical properties of transparent magnesium oxide ceramics fabricated by post hot-isostatic pressing
847
Thermal and optical properties of zinc halotellurite glasses
848
Thermal and optical studies of an amorphous InSe9 alloy produced by mechanical alloying
849
Thermal and oxidative stability of fluorinated alkyl aryl ethers
850
Thermal and palladium catalyzed pericyclic rearrangements of a pentaene ester
851
Thermal and pasting properties of native and acid-treated starches derivatized by 1-octenyl succinic anhydride
852
Thermal and performance analyses of efficient radioisotope power systems
853
Thermal and petrologic study of the CH-A well from the Chipilapa-Ahuachapán geothermal area, el salvador
854
Thermal and petrological structure of the lithosphere beneath Hannuoba, Sino-Korean Craton, China: evidence from xenoliths
855
Thermal and pH dual responsive alginate/CaCO3 hybrid membrane prepared under compressed CO2
856
Thermal and pH dual stimuli-responsive hybrid inclusion complex with tunable nonlinear optical properties
857
Thermal and pharmacological characterization of some new bis-xanthine derivatives
858
Thermal and phase evolution of mechanochemical reactions in the Al–Fe3O4 system
859
Thermal and Photo Control of the Linkage Isomerism of Bis(thiocyanato)(2,2-bipyridine)platinum(II)
860
Thermal and photo reversible gel–sol transition of azobenzene based liquid crystalline organogel
861
Thermal and photo substitution reactivity and crystal structures of tridentate Schiff base–ruthenium(II) complexes containing phosphorus or sulfur donor atoms
862
Thermal and photochemical behavior of trans-ruthenium(II) dichloride tetraphosphite complexes
863
Thermal and photochemical curing of isocyanate and acrylate functionalized oligomers
864
Thermal and photochemical degradation of dimethylsulfoxide on TiO2
865
Thermal and photochemical deposition of sulfur on GaAs(100)
866
Thermal and photochemical isomerization of exocyclic 1,3-dienes: 1,1-diphenyl-3,4-bis(trimethylsilylmethylene)-1-silacyclopentane s-cis(E,E)
867
Thermal and photochemical nitric oxide release from S-nitrosothiols incorporated in Pluronic F127 gel: potential uses for local and controlled nitric oxide release
868
Thermal and photochemical properties of 4′-hydroxyflavylium in water–ionic liquid biphasic systems
869
Thermal and photochemical reactions of Fischer carbene complexes with trialkylsilyl-substituted alkynes
870
Thermal and photochemical reactions of phenylethynyltris-(trimethylsilyl)germane
871
Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces
872
Thermal and photochemistry of tert-butyl iodide on ice films
873
THERMAL AND PHOTODECOMPOSITION OF FENITROTHION AND MALATHION INSECTICIDES
874
Thermal and photoinduced reduction of some benzyl bromides by an NAD(P)H model: the effect of electron withdrawing groups on mechanism and reactivity
875
Thermal and photoluminescence properties of hydrated YPO4:Eu3+ nanowires
876
Thermal and Physical Ageing Properties of Poly(methyl methacrylate) Silica Nanocomposites
877
Thermal and physical characterisation of apatite/wollastonite bioactive glass–ceramics
878
Thermal and physical properties of 30SrO–40SiO2–20B2O3–10A2O3 (A = La, Y, Al) glasses and their chemical reaction with bismuth vanadate for SOFC
879
Thermal and physical properties of Al–Ni–Ru–M alloys
880
Thermal and physical properties of B2 Al–Ir–X (X = Ni, Ru, Pd, Co, Fe) alloys
881
Thermal and physical properties of molten fluorides for nuclear applications
882
Thermal and probiotic treatment effects on restaurant waste for incorporation into poultry diet
883
Thermal and pseudoelastic cycling in Cu-14.1Al-4.2Ni (wt%) single crystals
884
Thermal and pseudoelastic cycling in Cu–14.1Al–4.2Ni (wt%) single crystals Original Research Article
885
Thermal and pulsed electric fields pasteurization of apple juice: Effects on physicochemical properties and flavour compounds Original Research Article
886
Thermal and quantum fluctuations in the kaon-condensed phase Original Research Article
887
Thermal- and radiation-enhanced diffusion of uranium in oxidised zirconium
888
Thermal and radiation-induced segregation in model Ni-base alloys
889
Thermal and radiative characteristics of oxyfluoride glass singly doped with lanthanide ions
890
Thermal and radiochemical degradation of some PAN copolymers
891
Thermal and radiolysis assisted formation of Au–Pd heteroaggregates
892
Thermal and Raman-spectroscopic analysis of Maya Blue carrying artefacts, especially fragment IV of the Codex Huamantla
893
Thermal and rare gas evolution of the mantle
894
Thermal and reflectance based personal identification methodology under variable illumination
895
Thermal and rheological behavior of acetylacetone stabilized ZnO nanofluids
896
Thermal and rheological characteristics of CuO–Base oil nanofluid flow inside a circular tube
897
Thermal and rheological properties and the effects of temperature on the viscosity and oxidation rate of unpurified salmon oil Original Research Article
898
Thermal and Rheological Properties Improvement of Oil-based Drilling Fluids Using Multi-walled Carbon Nanotubes (MWCNT)
899
Thermal and rheological properties of granular waxy maize mutant starches after isoamylase modification
900
Thermal and rheological properties of granular waxy maize mutant starches after β-amylase modification
901
Thermal and rheological properties of highly concentrated PET composites with ferrite nanoparticles
902
Thermal and rheological properties of oil-based nanofluids from different carbon nanostructures
903
Thermal and rheological properties of tapioca starch gels with and without xanthan gum under cold storage Original Research Article
904
Thermal and salt crystallization effects on marble deterioration: Examples from Western Anatolia, Turkey
905
Thermal and sanitary performance of domestic hot water cylinders: Conflicting requirements
906
Thermal and SAR characterization of multielement dual concentric conductor microwave applicators for hyperthermia,a theoretical investigation
907
Thermal and shape properties of asteroid (21) Lutetia from Herschel observations around the Rosetta flyby
908
Thermal and shrinkage behaviour of stretched peroxide-crosslinked high-density polyethylene
909
Thermal and Slip Effects on Rotor Time Constant in Vector Controlled Induction Motor Drives
910
Thermal and solutal effects on convection inside a polymer solution droplet on a substrate
911
Thermal and solvent effects on the coordination structure of LiAlH4: a computational study
912
Thermal and some physical properties of glasses in the La2O3−CaO−B2O3 ternary system
913
Thermal and sonochemical synthesis of porous (Ce,Zr)O2 mixed oxides from metal β-diketonate precursors and their catalytic activity in wet air oxidation process of formic acid
914
Thermal and sonochemical synthesis of porous (Ce,Zr)O2 mixed oxides from metal β-diketonate precursors and their catalytic activity in wet air oxidation process of formic acid
915
Thermal and spectral characterization of a binary mixture (acyclovir and fluocinolone acetonide): Eutectic reaction and inclusion complexes with β-cyclodextrin
916
Thermal and spectral properties of Mg(II) and Cu(II) complexes with heterocyclic N-donor ligands
917
Thermal and spectral studies of 5-(phenylazo)-2-thiohydantoin and 5-(2- hydroxyphenylazo)-2-thiohydantoin complexes of cobalt(II), nickel(II) and copper(II)
918
Thermal and spectral studies of binary complexes of cyanodithioformate with transition metal ions
919
Thermal and spectroscopic characterization of glasses and glass–ceramics of Li2O–Al2O3–SiO2 (LAS) system
920
Thermal and spectroscopic characterization of Mg(II) complexes of nitro-substituted benzoic acids
921
Thermal and spectroscopic investigation of europium and samarium sulphates hydrates by TG-FTIR and ICP-MS techniques
922
Thermal and spectroscopic properties of Tm3 + doped TZPPN transparent glass laser material
923
Thermal and spectroscopic properties of zinc perchlorate/poly(vinylpyrrolidone) blends and a comparison with related hydrogen bonding systems
924
Thermal and spectroscopic studies of feasibility of rhodium acetate versus chloride as a likely precursor for Rh° metal catalysts
925
Thermal and spectroscopic studies of scandium complex of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone
926
Thermal and spectroscopic studies of terbium(III) and dysprosium(III) complexes with piperidin-4-ones
927
Thermal and spectroscopic studies of zeolites exchanged with metal cations
928
Thermal and spectroscopic studies on sorption of nickel(II) ion on protonated baker’s yeast
929
Thermal and spectroscopic studies on the decomposition of [Ni{di(2-aminoethyl)amine}2]- and [Ni(2,2′:6′,2′′-terpyridine)2]-Montmorillonite intercalated composites
930
Thermal and stability considerations for a supercritical water-cooled fast reactor with downward-flow channels during power-raising phase of plant startup Original Research Article
931
Thermal and Stress Analysis in Butt, T-shaped and Tubular Joints in the Welding Process of Dissimilar Parts
932
Thermal and stress analysis of a sheet metal in welding
933
Thermal and stress analysis of Kinta RCC dam
934
Thermal and stress analysis of rapid electric heating injection mold for a large LCD TV panel
935
Thermal and stress modeling of multi-material laser processing Original Research Article
936
Thermal and stress-induced martensitic transformations in quaternary Ni50Mn37(In, Sb)13 ferromagnetic shape memory alloys
937
Thermal and structural analysis of 4,5,6-trimethoxyisatin
938
Thermal and structural analysis of a polymer bilayer film as an erasable optical material
939
Thermal and structural analysis of a polymer bilayer film as an erasable optical material
940
Thermal and structural analysis of the W7-X magnet heat radiation shield
941
Thermal and structural changes induced by mechanical alloying in melt-spun Fe–Ni based amorphous alloys
942
Thermal and structural changes induced by mechanical alloying in melt-spun Fe–Ni based amorphous alloys
943
Thermal and structural characterization of cyclomaltononaose (δ-cyclodextrin), cyclomaltodecaose (ε-cyclodextrin) and cyclomaltotetradecaose (ι-cyclodextrin)
944
Thermal and structural characterization of Fe–Nb–B alloys prepared by mechanical alloying
945
Thermal and structural characterization of Fe–Nb–B alloys prepared by mechanical alloying
946
Thermal and structural characterization of polypyrrole by direct-insertion probe pyrolysis mass spectrometry
947
Thermal and structural characterization of selenium-rich As–Se fibers
948
Thermal and structural characterization of synthetic and natural nanocrystalline hydroxyapatite
949
Thermal and structural characterization of trimethylolethane trihydrate
950
Thermal and structural characterizations of PEO–EMIHSO4 polymer electrolytes
951
Thermal and structural finite element analysis of water cooled silicon monochromator for synchrotron radiation: comparison of two different cooling schemes
952
Thermal and structural finite element analysis of water cooled silicon monochromator for synchrotron radiation: comparison of two different cooling schemes
953
Thermal and structural heterogeneities during cooking of a starch-based product by a non-intrusive ring sensor
954
Thermal and Structural Investigations of the Bis-Dihexadecyldimethylammonium Dichromate
955
Thermal and structural properties of a hemp–lime biocomposite
956
Thermal and structural properties of blends of isotactic with atactic polystyrene
957
Thermal and structural properties of Ca-rich Montmorillonite mechanically deformed by compaction and shear
958
Thermal and structural properties of high-energy electron irradiated poly(vinylidene fluoride-trifluoroethylene) copolymer blends
959
Thermal and structural properties of low-fluence irradiated graphite
960
Thermal and structural properties of unusual starches from developmental corn lines
961
Thermal and structural stability of single- and multi-walled carbon nanotubes up to 1800 °C in Argon studied by Raman spectroscopy and transmission electron microscopy
962
Thermal and structural studies on TeO2 substituted (PbO)0.5(P2O5)0.5 glasses
963
Thermal and structural study of BIVOX undoped and doped with La in various atmosphere toward applications in IT-SOFC Review Article
964
Thermal and structural study of glasses in the binary system TeO2–Pb(PO3)2
965
Thermal and structural study on densification of rare-earth-doped PbO–SiO2 aerogels
966
Thermal and structural study on the lattice compound 1,4-diammoniumbutane bis(theophyllinate)
967
Thermal and substituting effects of transition metal ions (Cr3+ or Mn4+) on physical properties of (V2O5)0.8-(P2O5)0.2 glass
968
Thermal and superconducting properties of glass–ceramic HTc BiSrCa(CuPr)O system
969
Thermal and technical analyses of solar chimneys
970
Thermal and tectonic consequences of India underthrusting Tibet
971
Thermal and tectonic evolution of the Falkland Islands: implications for hydrocarbon exploration in the adjacent offshore region
972
Thermal and tectonic evolution of the paleoproterozoic Transamazonian orogen as deduced from 40Ar/39Ar and AMS along the Oyapok river (French Guyana)
973
Thermal and tensile behavior of LLDPE films containing limited amounts of an oxo-biodegradable additive and/or amorphous poly(1-hexene) before and after UV irradiation
974
Thermal and tensile properties of HTPB-based PU with PVC blends
975
Thermal and tensile properties of polysialate composites
976
Thermal and themoxidative degradation processes in poly(bisphenol a carbonate)
977
Thermal and thermal-stress analyses of IFMIF liquid lithium target assembly
978
Thermal and Thermal-Stressed States of Railway Wheels in the Process of Local Surface Hardening
979
Thermal and thermo-catalytic degradation of high-density polyethylene waste
980
Thermal and thermoelastic behaviour of multiply coated inclusion-reinforced composites
981
Thermal and thermoelectric properties of icosahedral Al62Cu25.5Fe12.5 quasicrystal
982
Thermal and thermoelectric properties of icosahedral Al62Cu25.5Fe12.5 quasicrystal
983
Thermal and thermohydraulic performance of roughened solar air heater having protruded absorber plate
984
Thermal and thermo-mechanical influence on crack propagation using an extended mesh free method
985
Thermal and thermo-oxidative decomposition of ammonium–iron(II) phosphate monohydrate
986
Thermal and thermo-oxidative degradation of poly(hydroxy ether of bisphenol-A) studied by TGA/FTIR and TGA/MS
987
Thermal and thermo-oxidative degradation of poly(hydroxy ether of bisphenol-A) studied by TGA/FTIR and TGA/MS
988
Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)
989
Thermal and thermo-oxidative stability of reprocessed poly(ethylene terephthalate)
990
Thermal and topographic tests of Europa chaos formation models from Galileo E15 observations
991
Thermal and topographical characterization of polyester- and styrene/acrylate-based composite powders by scanning probe microscopy
992
Thermal and Transport Properties of Mafic and Ultramafic Rocks of Oman Ophiolite
993
Thermal and transport properties of mantle rock at high pressure: Applications to super-Earths
994
Thermal and transport properties of Ni2MnGa1−xAlx alloys
995
Thermal and UV stability of β-carotene dissolved in peppermint oil microemulsified by sunflower lecithin and Tween 20 blend
996
Thermal and velocity slip effects on the peristaltic flow of a six constant Jeffrey’s fluid model
997
Thermal and ventilation modelling of large highly-glazed spaces
998
Thermal and viscoelastic properties of alginate/poly(vinyl alcohol) blends cross-linked with calcium tetraborate
999
Thermal and viscoelastic structure–property relationships of model comb-like poly(n-butyl methacrylate)
1000
Thermal and visual time-series at a seafloor gas hydrate deposit on the Gulf of Mexico slope
