ليست عنوان مقالات لاتين Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti–Ni shape memory alloys Optimized bath for electroless deposition of palladium on amorphous alumina membranes

<< مقالات لاتين >>

<< بر اساس عنوان >>

1

Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti–Ni shape memory alloys

2

Optimization of the collection efficiency of a hexagonal light collector using quadratic and cubic Bézier curves

3

Optimization of the combing noil percentage for quality single and ply compact spun yarn

4

Optimization of the combustion of blends of domestic fuel oil and cottonseed oil in a non-modified domestic boiler

5

Optimization of the composite brick composed of expanded polystyrene and pumice blocks

6

Optimization of the composition of crop collections for ex situ conservation

7

Optimization of the concentration of photo-initiator in a one-step self-etch adhesive

8

Optimization of the concentric heat exchanger with injector turbulators by Taguchi method

9

Optimization of the conditions of isolation and culture of dairy goat male germline stem cells (mGSC)

10

Optimization of the Conditions of Process of Production of Pectin Extracted from the Waste of Potato Peel

11

Optimization of the configuration of 290 × 140 × 90 hollow clay bricks with 3-D numerical simulation by finite volume method

12

Optimization of the Constant Power Speed Range of a Saturated Permanent-Magnet Synchronous Motor

13

Optimization of the Construction System of Relief Tents Used in Emergency Accommodation

14

Optimization of the content of retained austenite in Fe–(0.01–0.045)C–14Cr–(4–9)Ni weld metals for strength–ductility balance

15

Optimization of the contents of Arabic gum, xanthan gum and orange oil affecting turbidity, average particle size, polydispersity index and density in orange beverage emulsion

16

Optimization of the control parameters of a pneumatic servo cylinder drive using genetic algorithms

17

Optimization of the cooling circuit and thermo-mechanical analysis for the extraction grid of ELISE

18

Optimization of the cooling profile to improve the filterability of crystals isolated during an optical resolution by diastereomeric salt formation

19

Optimization of the core configuration design using a hybrid artificial intelligence algorithm for research reactors Original Research Article

20

Optimization of the Cost Function in the Drilling of Oil Well Network by Balas Algorithm

21

Optimization of the coupling of high-temperature liquid chromatography and flame ionization detection: Application to the separations of alcohols

22

Optimization of the Cropping Pattern in District Hunza, Gilgit-Baltistan

23

Optimization of the Crystal Surface Temperature Distribution in the Single-Crystal Growth Process by the Czochralski Method

24

Optimization of the Culture Medium, Fermentation Process, and Effectiveness of a Biopesticide from an Iranian Bacillus thuringiensis var. tenebrionis (BN2)

25

Optimization of the curing conditions of PVC plastisols based on the use of an epoxidized fatty acid ester plasticizer

26

Optimization of the cutting edge radius of PVD coated inserts in milling considering film fatigue failure mechanisms

27

Optimization of the cycle life performance of VRLA batteries, working under high rate, partial state of charge (HRPSOC) conditions

28

Optimization of the cyclodextrin-assisted capillary electrophoresis separation of the enantiomers of phenoxyacid herbicides

29

Optimization of the data taking strategy for a high precision mass measurement

30

Optimization of the Decoking Procedure of an Ethane Cracker with a Steam/Air Mixture

31

Optimization of the deflated Conjugate Gradient algorithm for the solving of elliptic equations on massively parallel machines

32

Optimization of the Deployment of Temperature Nodes Based on Linear Programing in the Internet of Things

33

Optimization of the deposition process of ZrN and TiN thin films on Si(1 0 0) using design of experiment method

34

Optimization of the derivatization reaction and the solid-phase microextraction conditions using a D-optimal design and three-way calibration in the determination of non-steroidal anti-inflammatory drugs in bovine milk by gas chromatography–mass spectrome

35

Optimization of the design and performance of hydrocyclones by Differential Evolution technique

36

Optimization of the design factors for thermal performance of a parallel-flow heat exchanger

37

Optimization of the design for the LCLS undulator line

38

Optimization of the design for the LCLS undulator line

39

Optimization of the design of a polymer flat plate solar collector

40

Optimization of the Design of a Solar Lemon Tree Nursery

41

Optimization of the design of catalysts for the hydrodemetallation of deasphalted vacuum bottoms Original Research Article

42

Optimization of the design of OMNIS, the observatory of multiflavor neutrinos from supernovae

43

Optimization of the design of OMNIS, the observatory of multiflavor neutrinos from supernovae

44

Optimization of the design of recuperative heat exchangers in the exhaust nozzle of an aero engine

45

Optimization of the design of the hard X-ray polarimeter X-Calibur

46

Optimization of the design parameters aiming at the minimization of the depletion of non-renewable resources

47

Optimization of the design parameters of Parallel-Plain Fin heat sink module cooling phenomenon based on the Taguchi method

48

Optimization of the determination of chemical oxygen demand in wastewaters Original Research Article

49

Optimization of the determination of organic acids and sugars in fruit juices by ion-exclusion liquid chromatography

50

Optimization of the determination of organic acids and sugars in fruit juices by ion-exclusion liquid chromatography

51

Optimization of the determination of polybrominated diphenyl ethers in human serum using solid-phase extraction and gas chromatography-electron capture negative ionization mass spectrometry

52

Optimization of the determination of tocopherols in Agaricus sp. edible mushrooms by a normal phase liquid chromatographic method

53

Optimization of the DFIG Wind Turbine Controller Parameters by the Gray Wolf Algorithm

54

Optimization of the difference of ICR functions Original Research Article

55

Optimization of the diffusive gradients in thin films (DGT) method for simultaneous assay of potassium and plant-available phosphorus in soils

56

Optimization of the digestion process of Scenedesmus sp. and Opuntia maxima for biogas production

57

Optimization of the direct Carnot cycle

58

Optimization of the distribution of compressed natural gas (CNG) refueling stations: Swiss case studies

59

Optimization of the dopant for the trace determination of polycyclic aromatic hydrocarbons by liquid chromatography/dopant-assisted atmospheric-pressure photoionization/mass spectrometry

60

Optimization of the dose of calcium lactate as a new coagulant for the coagulation–flocculation of suspended particles in water Original Research Article

61

Optimization of the DPV potential waveform for determination of ascorbic acid on PEDOT-modified electrodes

62

Optimization of the drainage system of overburden dumps using geofiltration modeling

63

Optimization of the dual cycle considering the effect of combustion on power

64

Optimization of the dual energy-integration mechanism in a parallel-type hybrid vehicle

65

Optimization Of The Ductile Properties Of A Arc Welded Plate Based On The Yield Strength, Elongation an‎d Modulus Of Elasticity

66

Optimization of the duration of cryogenic processing to maximize wear resistance of AISI D2 steel Original Research Article

67

Optimization of the dynamic behavior of a solar distillation cell by Model Predictive Control Original Research Article

68

Optimization of the dynamic network data envelopment analysis (DNDEA) model ‌based on the game theory in the capital market

69

Optimization of the effective light attenuation length of YAP:Ce and LYSO:Ce crystals for a novel geometrical PET concept

70

Optimization of the effective light attenuation length of YAP:Ce and LYSO:Ce crystals for a novel geometrical PET concept

71

Optimization of the electret fibrous structures

72

Optimization of the electrical conductivity of polypyrrole films electrogenerated on aluminium electrodes

73

Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics

74

Optimization of the electrical properties of Ti–Nb stabilized ferritic stainless steel SOFC interconnect alloy upon high-temperature oxidation: The role of excess Nb on the interfacial oxidation at the oxide–metal interface

75

Optimization of the electrocoagulation process for the removal of copper, lead and cadmium in natural waters and simulated wastewater

76

Optimization of the electrodeposition of copper on poly-1-naphthylamine for the amperometric detection of carbohydrates in HPLC

77

Optimization of the electrodeposition of Raney nickel on titanium substrate

78

Optimization of the electrode-supported tubular solid oxide cells for application on fuel cell and steam electrolysis

79

Optimization of the electrolyte composition in a (Li0.52Na0.48)2−2xAExCO3 (AE = Ca and Ba) molten carbonate fuel cell

80

Optimization of the electrolytic plasma oxidation processes for corrosion protection of magnesium alloy AM50 using the Taguchi method

81

Optimization of the electron-beam transport in the Israeli tandem FEL

82

Optimization of the electron-beam transport in the Israeli tandem FEL

83

Optimization of The Electroporation Conditions for Transfection of Human Factor IX into The Goat Fetal Fibroblasts

84

Optimization of the electrospinning conditions for preparation of nanofibers from polyvinylacetate (PVAc) in ethanol solvent

85

Optimization of the electrostatic and magnetic field configuration in the MITICA accelerator

86

Optimization of the enantiomeric separation of tryptophan analogs by membrane processes

87

Optimization of the energy demand of reverse osmosis with a pressureexchange system

88

Optimization of the energy harvested by the effect of strain and frequency on an electrostrictive polymer composite

89

Optimization of the energy transfer in a system combining photovoltaic source to ultracapacitors

90

Optimization of the environmental performance of rainfed durum wheat by adjusting the management practices

91

Optimization of the Enzymatic Hydrolysis of Poultry Slaughterhouse Wastes using Alcalase Enzyme for the Preparation of Protein Hydrolysates

92

Optimization of the enzymatic synthesis of O-glycan core 2 structure by use of a genetic algorithm

93

Optimization of the enzymatic treatment during aqueous oil extraction from sunflower seeds

94

OPTIMIZATION OF THE E-PLANE LOADED RECTANGULAR WAVEGUIDE FOR LOW-LOSS PROPAGATION

95

Optimization of the Esperanza window trap for the collection of the African onchocerciasis vector Simulium damnosum sensu lato

96

Optimization of the ETBE (ethyl tert-butyl ether) production process

97

Optimization of the ethanolysis of Raphanus sativus (L. Var.) crude oil applying the response surface methodology

98

Optimization of the EUROFER uniaxial diffusion weld

99

Optimization of the experimental conditions for high-temperature shock consolidation

100

Optimization of the experimental conditions for the synthesis of micro-size monodisperse spherical silver powders using Box–Behnken design

101

Optimization of the experimental parameters in the determination of lamotrigine by adsorptive stripping voltammetry Original Research Article

102

Optimization of the experimental parameters in the determination of rifamycin SV by adsorptive stripping voltammetry Original Research Article

103

Optimization of the exponential stabilization problem in active suspension system using PSO

104

Optimization of the Expression of Genes Encoding Poly (3-hydroxyalkanoate) Synthase from Pseudomonas aeruginosa PTCC 1310 in Escherichia coli

105

Optimization of the expression of reteplase in Escherichia coli

106

Optimization of the Expression of Reteplase in Escherichia coli TOP10 Using Arabinose Promoter

107

Optimization of the extended terminal subfluidization wash (ETSW) filter backwashing procedure

108

Optimization of the extraction conditions of the volatile compounds from chili peppers by headspace solid phase micro-extraction

109

Optimization of the extraction for the determination of arsenic species in plant materials by high-performance liquid chromatography coupled with hydride generation atomic fluorescence spectrometry

110

Optimization of the extraction of anthocyanin from Bokbunja (Rubus coreanus Miq.) marc produced during traditional wine processing and characterization of the extracts

111

Optimization of the extraction of apple monomeric phenolics based on response surface methodology: Comparison of pressurized liquid–solid extraction and manual-liquid extraction

112

Optimization of the extraction of apple monomeric phenolics based on response surface methodology: Comparison of pressurized liquid–solid extraction and manual-liquid extraction

113

Optimization of the extraction of azo colorants used in toy products

114

Optimization of the extraction of chlorophylls in green beans (Phaseolus vulgaris L.) by N,N-dimethylformamide using response surface methodology

115

Optimization of the extraction of chlorophylls in green beans (Phaseolus vulgaris L.) by N,N-dimethylformamide using response surface methodology

116

Optimization of the extraction of polycyclic aromatic hydrocarbons from wood samples by the use of microwave energy

117

Optimization of the extraordinary magnetoresistance in semiconductor–metal hybrid structures for magnetic-field sensor applications

118

Optimization of the factors affecting dried apricots antioxidants content by experimental design

119

Optimization of the FAST ICRF antenna using TOPICA code

120

Optimization of the fatigue resistance of AISI304 stainless steel by ultrasonic impact treatment

121

Optimization of the Fe3O4/FexCuyWzOt photocatalyst for 2,4 dichlorophenoxyacetic acid wastewater degradation using the response surface method

122

Optimization of the FeCo nanowire fabrication embedded in anodic aluminum oxide template by response surface methodology

123

Optimization of the fermentation conditions of Rhizopus japonicus M193 for the production of chitin deacetylase and chitosan

124

Optimization of the fermentation process through ELF magnetic field radiation and its effect on Cascara Caffeine

125

Optimization of the fertilization by nutrients of the ocean, taking fixation by phytoplankton into account

126

Optimization of the Fiber Cement Composite Process

127

Optimization of the finite production rate model with scrap, rework and stochastic machine breakdown

128

Optimization of the fixed-bed reactor for ethylene epoxidation

129

Optimization of the foam-filled aluminum tubes for crush box application

130

Optimization of the Forging Process of an Aerofoil Blade using the Finite Element Analysis and Response Surface Method

131

Optimization of the form of a building on an oval base

132

Optimization of the formation of bismuth telluride thin film by using ECALE

133

Optimization of the forming conditions of the solid-state interface in the Li-ion batteries

134

Optimization of the formulation and post-treatment of stainless steel for rapid manufacturing

135

Optimization of the formulation of micro-polymer concretes

136

Optimization of the Four Most Effective Factors on β-Carotene Production by Dunaliella salina Using Response Surface Methodology

137

Optimization of the free electron laser interaction via electron bunch trapping

138

Optimization of the freezing process of red shrimp (Pleoticus muelleri) previously treated with phosphates

139

Optimization of the gain in Yb3+-doped cubic laser crystals of 99.99% purity

140

Optimization of the gas flow in the neutralization region of EAST neutral beam injector

141

Optimization of the gas production rate by marginal cost analysis: Influence of the sales gas pressure, gas price and duration of gas sales contract

142

Optimization of the Gasoline Production Plant in order to Increase Feed

143

Optimization of the GC method for routine analysis of the fatty acid profile in several food samples

144

Optimization of the geometry of a double-path spray chamber for inductively coupled plasma-atomic emission spectrometry by computer simulation and an evolutionary strategy

145

Optimization of the Glycyrrhizic Acid Extraction from Licorice by Response Surface Methodology

146

Optimization of the green supply chain management considering uncertainty in consequence of risk (Case Study: Golsam Company)

147

Optimization of the Gβ1 Domain by Computational Design and by in Vitro Evolution: Structural and Energetic Basis of Stabilization

148

Optimization of the headspace solid-phase microextraction for determination of glycol ethers by orthogonal array designs

149

Optimization of the Heating Surfaces of Turbine Reheaters at Nuclear Power Stations

150

Optimization of the Heating Surfaces of Turbine Reheaters at Nuclear Power Stations

151

Optimization of the heterocyclic core of the quinazolinone-derived CXCR3 antagonists

152

Optimization of the heterogeneous Fenton-oxidation of the model pollutant 2,4-xylidine using the optimal experimental design methodology

153

Optimization of the heterologous production of a Rhizopus oryzae lipase in Pichia pastoris system using mixed substrates on controlled fed-batch bioprocess

154

Optimization of the High Speed Machining of Hardened AISI 4140 Steel using Vapor Deposited Cutting Tools (Wear and Roughness)

155

Optimization of the High Speed Machining of Hardened AISI 4140 Steel using Vapor Deposited Cutting Tools (Wear and Roughness)

156

Optimization of the high-performance liquid chromatographic separation of a complex mixture containing urinary steroids, boldenone and bolasterone: application to urine samples

157

Optimization of the homogeneous rhodium-catalyzed methanol carbonylation reactor to reduce CO2 emissions

158

Optimization of the host–plasmid interaction in the recombinant Escherichia coli strains overproducing penicillin G acylase

159

Optimization of the HPLC separation of aromatic groups in petroleum fractions

160

Optimization of the HS-SPME–GC–IT/MS method using a central composite design for volatile carbonyl compounds determination in beers

161

Optimization of the humidification of cold stores by pressurized water atomizers based on a multiscale CFD model Original Research Article

162

Optimization of the hydrogen yield from single-stage photofermentation of glucose by Rhodobacter capsulatus JP91 using response surface methodology

163

Optimization of the hydrolytic–acidogenic anaerobic digestion stage (55 °C) of sewage sludge: Influence of pH and solid content

164

Optimization of the hydrophobic domain in poly(ethylene oxide)-poly(ɛ-caprolactone) based nano-carriers for the solubilization and delivery of Amphotericin B

165

Optimization of the hyphenation between capillary zone electrophoresis and inductively coupled plasma mass spectrometry for the measurement of As-, Sb-, Se- and Te-species, applicable to soil extracts

166

Optimization of the IGNITOR operating scenario at 11 MA

167

Optimization of the immobilization parameters and operational stability of immobilized hydantoinase and l-N-carbamoylase from Arthrobacter aurescens for the production of optically pure l-amino acids

168

Optimization of the in vitro oxidative biotransformation of glimepiride as a model substrate for cytochrome p450 using factorial design

169

Optimization of the Inactivation Process of FMD Virus Serotype SAT-2 by Binary Ethyleneimine (BEI)

170

Optimization of the incision size and cold-end temperature of a thermoelectric device

171

Optimization of the index assignments for multiple description vector quantizers

172

Optimization of the indolyl quinolinone class of KDR (VEGFR-2) kinase inhibitors: effects of 5-amido- and 5-sulphonamido-indolyl groups on pharmacokinetics and hERG binding

173

Optimization of the Inflationary Inventory Control Model under Stochastic Conditions with Simpson Approximation: Particle Swarm Optimization Approach

174

Optimization of the influential factors for the improvement of CO2 utilization efficiency and CO2 mass transfer rate

175

Optimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis

176

Optimization of the injection molding process of short glass fiber reinforced polycarbonate composites using grey relational analysis

177

Optimization of the Injectors Position for an Electric Arc Furnace by using CFD Simulation

178

Optimization of the in-needle extraction device for the direct flow of the liquid sample through the sorbent layer

179

Optimization of the input losses in fiber-optic communications with an acousto-optic all-optical switch

180

Optimization of the In-Silico-Designed Kemp Eliminase KE70 by Computational Design and Directed Evolution

181

Optimization of the inspection intervals of a safety system in a nuclear power plant by Multi-Objective Differential Evolution (MODE)

182

Optimization of the inspection intervals of a safety system in a nuclear power plant by Multi-Objective Differential Evolution (MODE)

183

Optimization of the integration time of pulse shape analysis for dual-layer GSO detector with different amount of Ce

184

Optimization of the integration time of pulse shape analysis for dual-layer GSO detector with different amount of Ce

185

Optimization of the interface polarization of the La2NiO4-based cathode working with the Ce1–xSmxO2–δ electrolyte system

186

Optimization of the intermittent chlorine injection (ICI) method for seawater desalination RO plants Original Research Article

187

Optimization of the Interventricular Delay in Cardiac Resynchronization Therapy Using the QRS Width

188

Optimization of the ion chromatographic quantification of airborne fluoride, acetate and formate in the Metropolitan Museum of Art, New York

189

Optimization of the ion-exchange analysis of organic acids from fermentation

190

Optimization of the ionization conditions for the trace analysis of PCDD/PCDF with ion trap MS/MS

191

Optimization of the irregular shape rolling process with an artificial neural network

192

OPTIMIZATION OF THE IRREVERSIBLE STIRLING HEAT ENGINE

193

OPTIMIZATION OF THE IRREVERSIBLE STIRLING HEAT ENGINE

194

Optimization of the irrigation water resources for agricultural sustainability in Tarim River Basin, China

195

Optimization of the isolation and quantitation of kahweol and cafestol in green coffee oil

196

Optimization of the JET beryllium tile profile for power handling

197

Optimization of the jet steam instantizing process of commercial maltodextrins powders Original Research Article

198

Optimization of the keyboard arrangement problem using an Ant Colony algorithm

199

OPTIMIZATION OF THE KINEMATIC CHARACTERISTICS OF THE CAR WHEEL SUSPENSION

200

OPTIMIZATION OF THE KINEMATIC CHARACTERISTICS OF THE CAR WHEEL SUSPENSION

201

Optimization of the Kinematic Sensitivity and the Greatest Continuous Circle in the Constant-orientation Workspace of Planar Parallel Mechanisms

202

Optimization of the lateral field excited platform for liquid sensing applications

203

Optimization of the Leaf Mesophyll Structure in Alloploid and Diploid Wheat Species

204

Optimization of the LENS® process for steady molten pool size

205

Optimization of the liquid chromatography enantioseparation of chiral acidic compounds using cellulose tris(3-chloro-4-methylphenylcarbamate) as chiral selector and polar organic mobile phases

206

Optimization of the liquid–liquid extraction method and low temperature purification (LLE–LTP) for pesticide residue analysis in honey samples by gas chromatography

207

Optimization of the location of multiple discrete heat sources in a ventilated cavity using artificial neural networks and micro genetic algorithm

208

Optimization of the locations of the loudspeaker and absorption material in a small room

209

Optimization of the low energy electron point source microscope: imaging of macromolecules

210

Optimization of the lower arm of a vehicle suspension system for road noise reduction by sensitivity analysis

211

Optimization of the luminescence emission of Si nanocrystals synthesized from non-stoichiometric Si oxides using a Central Composite Design of the deposition process

212

Optimization of the Lyapunov Based Nonlinear Controller Parameters in a Single-Phase Grid-Connected Inverter

213

Optimization of the magnesium-solution phase catholyte semi-fuel cell for long duration testing

214

Optimization of the magnetic bead antigen capture enzyme immuno assay for the detection of circulating anodic antigens in mixed Schistosoma infections

215

Optimization of the magnetic properties and microstructure of Co2+–La3+ substituted strontium hexaferrite by varying the production parameters

216

Optimization of the main parts of hydroelectric sets using hybrid genetic algorithm

217

Optimization of the master-slave inverter system for grid-connected photovoltaic plants

218

Optimization of the material flow in a manufacturing plant by use of artificial bee colony algorithm

219

Optimization of the material structure and composition of cement based composites

220

Optimization of the matrix solid-phase dispersion sample preparation procedure for analysis of polycyclic aromatic hydrocarbons in soils: Comparison with microwave-assisted extraction

221

Optimization of the maximum delay of global interconnects during layer assignment

222

Optimization of the Mechanical Performance of a Two-duct Semicircular Duct System—Part 1: Dynamics and Duct Dimensions

223

Optimization of the Mechanical Performance of a Two-duct Semicircular Duct System—Part 2: Excitation of Endolymph Movements

224

Optimization of the Mechanical Performance of a Two-duct Semicircular Duct System—Part 3: The Positioning of the Ducts in the Head

225

Optimization of the mechanical properties of calcium phosphate/multi-walled carbon nanotubes/bovine serum albumin composites using response surface methodology

226

Optimization of the mechanical properties of virtual porous solids using a hybrid approach Original Research Article

227

Optimization of the medium composition for production of mycelial biomass and exo-polymer by Grifola frondosa GF9801 using response surface methodology

228

Optimization of the medium composition for the submerged culture of Ganoderma lucidum by Taguchi array design and steepest ascent method

229

Optimization of the membrane and pore design for micro-machined membranes

230

Optimization of the methylic biodiesel purification process by intermediate of liquid–liquid equilibrium data for ternary systems containing methanol + water + (soybean, corn or brown shell of coconut) biodiesel

231

Optimization of the mevalonate-based isoprenoid biosynthetic pathway in Escherichia coli for production of the anti-malarial drug precursor amorpha-4,11-diene

232

Optimization of the Mg–Al–Zn–Ca–Sr alloy composition based on the parameter A′ in the constitutive equation for the climb-controlled dislocation creep including the stacking fault energy

233

OPTIMIZATION OF THE MICRO-CLONING SYSTEM OF THREATENED Moringa oleifera LAM.

234

Optimization of the Microgrid Scheduling with Considering Contingencies in an Uncertainty Environment

235

Optimization of the microstructure and corrosion resistance of Finemet type alloys in KOH solutions

236

Optimization of the microstructure for improving superplastic forming in magnesium alloys

237

Optimization of the microstructure for improving superplastic forming in magnesium alloys

238

Optimization of the mixed urease/amphiphile Langmuir–Blodgett film and its application for biosensor development

239

Optimization of the model of abdominal aortic aneurysm by co-incubation of calcium chloride and collagenase in rats

240

Optimization of the molecular hyperpolarizability for second harmonic generation in chiral media Original Research Article

241

Optimization of the MOVPE growth of GaN on sapphire

242

Optimization of the MOVPE growth of GaN on sapphire

243

Optimization of the multilinear compression function applied to calorimetry

244

Optimization of the multilinear compression function applied to calorimetry

245

Optimization of the Multi-Objective Flexible Job Shop Scheduling model by applying NSGAII and NRGA Algorithms

246

Optimization of the Multi-Spectral Euclidean Distance calculation for FPGA-based spaceborne systems

247

Optimization of the nanofabrication by acid hydrolysis of bacterial cellulose nanowhiskers

248

Optimization of the Nano-Porous Silicon Structures by Magnesiothermic Reduction of the As-Synthesized Silica

249

Optimization of the naphtha hydro treating unit (NHT) in order to increase feed in the refinery

250

Optimization of the negative impact of power and desalination plants on the ecosystem Original Research Article

251

Optimization of the nose shape of an impactor against a semi-infinite FRP laminate

252

Optimization of the numerical algorithms of the ADREA-I mesoscale prognostic meteorological model for real-time applications

253

Optimization of the Occlusion Strategy in Visual Tracking

254

Optimization of the operating condition of the accelerating tube for the high voltage electron microscope equipped with the field emission gun

255

Optimization of the operating parameters and their effects on the degradation of Naphthol Blue Black by the Fenton process

256

Optimization of the operating parameters using RSM for the Fenton oxidation process and adsorption on vegetal carbon of MO solutions

257

Optimization of the operational parameters for a 50 nm ZrO2 ceramic membrane as applied to the ultrafiltration of post-electrodeposition rinse wastewater Original Research Article

258

Optimization of the operational parameters for desalination with response surface methodology during a capacitive deionization process Original Research Article

259

Optimization of the operational variables of a medium-scale reactor for metal-containing wastewater purification by ferrite formation

260

Optimization of the optical and electrical properties of electron beam evaporated aluminum-doped zinc oxide films for opto-electronic applications Original Research Article

261

Optimization of the optical design of the Russian–German soft-X-ray beamline at BESSY II

262

Optimization of the optical design of the Russian–German soft-X-ray beamline at BESSY II

263

Optimization of the optical properties of a deeply etched semiconductor electrooptic modulator

264

Optimization of the organic solvent-stable asymmetric hydrogen transfer system of Rhodococcus ruber DSM 44541: an activity-growth study

265

Optimization of the orifice pulse tube Original Research Article

266

Optimization of the Outer Laser-Induced Spalling

267

Optimization of the overall energy consumption in cascade fueling stations for hydrogen vehicles

268

Optimization of the overexpression of glutamate mutase S component under the control of T7 system by using lactose and IPTG as the inducers

269

Optimization of the Oxidative Desulfurization Process of Light Cycle Oil with NiMo/γ Al2O3 Catalyst

270

Optimization of the Palindromic Order of the TtgR Operator Enhances Binding Cooperativity

271

Optimization of the Paper Permeability Tester using Robust Design

272

Optimization of the parameterized Uzawa preconditioners for saddle point matrices

273

Optimization of the Parameters Affecting the Fenton Process for Decolorization of Reactive Red 198 (RR-198) from the Aqueous Phase

274

Optimization of the Parameters Affecting the Metallization Degree of Sponge Iron in a Midrex Plant Using Central Composite Design

275

Optimization of the Parameters Influencing the Photo-Fenton Process for the Decolorization of Reactive Red 198 (RR198)

276

OPTIMIZATION OF THE PARAMETERS OF A HOISTING MECHANISM

277

Optimization of the particle discriminator based on the ballistic deficit method using delay-switched gated integrator

278

Optimization of the particle discriminator based on the ballistic deficit method using delay-switched gated integrator

279

Optimization of the PCM-integrated solar domestic hot water system under different thermal stratification conditions

280

Optimization of the Pd–Sn–GNS nanocomposite for enhanced electrooxidation of methanol

281

Optimization of the peak capacity per unit time

282

Optimization of the performance of a CsI(Tl) scintillator + Si PIN photodiode detector for medium-energy light-charged particle hybrid array Original Research Article

283

Optimization of the Performance of a Grid-Connected Induction Generator

284

Optimization of the performance of double-fac¸ades with integrated photovoltaic panels and motorized blinds

285

Optimization of the performance of flotation circuits using a genetic algorithm oriented by process-based rules

286

Optimization of the performance of polymer electrolyte fuel cell membrane-electrode assemblies: Roles of curing parameters on the catalyst and ionomer structures and morphology

287

Optimization of the Performance of Single-Phase Capacitor-Run Induction Motor

288

Optimization of the performance of the hydrodynamic parameters on the flotation performance of coarse coal particles using design expert (DX8) software

289

OPTIMIZATION OF THE PERFORMANCE OF VAPOUR COMPRESSION CYCLE USING LIQUID SUCTION LINE HEAT EXCHANGER

290

Optimization of the performances of SU-8 organic microcantilever resonators by tuning the viscoelastic properties of the polymer

291

Optimization of the Phenolics and Antioxidants Extraction from Ganoderma Lucidum Using Ultrasound Method

292

Optimization of the photocatalytic activity of CdO + CdTiO3 coupled oxide thin films obtained by sol–gel technique

293

Optimization of the Photocatalytic Oxidation Process in Toluene Removal from Air

294

Optimization of the photochemical generation of trifluoronitromethane, CF3NO2, and a refined purification technique

295

Optimization of the photochemically initiated polymerization of methyl methacrylate

296

Optimization of the photovoltaic thermal (PV/T) collector absorber

297

Optimization of the photovoltaic-hydrogen supply system of a stand-alone remote-telecom application

298

Optimization of the physical cleaning condition for nanotechnology

299

Optimization of the p–i interface properties in thin film microcrystalline silicon solar cell

300

Optimization of the Pistachio Roasting Process with Hot Air Using the Response Surface Methodology

301

Optimization of the plasma oxidation and abrasive polishing processes in plasma-assisted polishing for highly effective planarization of 4H-SiC

302

Optimization of the polypyrrole-coating parameters for proton exchange membrane fuel cell bipolar plates using the Taguchi method

303

Optimization of the Pool Boiling Heat Transfer in the Region of the Isolated Bubbles using the ABC Algorithm

304

Optimization of the pore structure of nickel/graphite hybrid materials for hydrogen storage

305

Optimization of the power ascension path for a boiling water reactor using genetic algorithms

306

Optimization of the preliminary treatment in a desalination plant by reverse osmosis Original Research Article

307

Optimization of the preparation method of HSO3-functionalized MCM-41 solid catalysts

308

Optimization of the preparation methods: Synthesis of mesostructured TiO2 with high photocatalytic activities

309

Optimization of the preparation of pectin from Aloe using a Box–Behnken design

310

Optimization of the preparation procedure of cobalt modified silicas as catalysts in methanol decomposition Original Research Article

311

Optimization of the preparation procedure of Ni/Al2O3 catalyst for steam reforming of n-butane

312

Optimization of the preparative separation of a chiral pharmaceutical intermediate by high performance liquid chromatography

313

Optimization of the pre-polymerization step of polyethylene terephthalate (PET) production in a semi-batch reactor

314

Optimization of the pretreatment procedure in the design of cobalt silica supported Fischer–Tropsch catalysts

315

Optimization of the principal parameters for the ultrarapid electrophoretic separation of reduced and oxidized glutathione by capillary electrophoresis

316

Optimization of the Prismatic Core Sandwich Panel under Buckling Load and Yield Stress Constraints using an Improved Constrained Differential Evolution Algorithm

317

Optimization of the procedure of formation of high-strength compositions based on the relationship between technological and service parameters of plasma spraying

318

Optimization of the process parameters for the utilization of orange peel to produce polygalacturonase by solid-state fermentation from an Aspergillus sojae mutant strain

319

Optimization of the process parameters of synthesis of vinblastine imprinted polymer

320

Optimization of the Process Variables for Minimizing of the Aflatoxin M1 Content in Iranian White Brine Cheese

321

Optimization of the process variables for the synthesis of cardanol-based novolac-type phenolic resin using response surface methodology

322

Optimization of the processing parameters during internal oxidation of Cu–Al alloy powders using an artificial neural network

323

Optimization of the production of biodiesel from soybean oil by ultrasound assisted methanolysis

324

Optimization of the Production of Biosurfactant by Psuedomonas aeruginosa HR Isolated from an Iranian Southern Oil Well

325

Optimization of the production of Momordica charantia L. Var. abbreviata Ser. protein hydrolysates with hypoglycemic effect using Alcalase

326

Optimization of the production of organic solvent-stable protease by Bacillus sphaericus DS11 with response surface methodology

327

Optimization of the production of poly-γ-glutamic acid by Bacillus amyloliquefaciens C1 in solid-state fermentation using dairy manure compost and monosodium glutamate production residues as basic substrates

328

Optimization of the production of solid Witepsol nanoparticles loaded with rosmarinic acid

329

Optimization of the Production Parameters of Composites from Sugarcane Bagasse and Iron Salts for Use in Dye Adsorption

330

Optimization of the production process through response surface method: Bricks made of loess

331

Optimization of the proton chopper for 7Li(p,n) neutron spectrometry using a 3He ionization chamber

332

Optimization of the proton chopper for 7Li(p,n) neutron spectrometry using a 3He ionization chamber

333

Optimization of the pulse arrival time determination in the ZEUS central tracking detector FADC system

334

Optimization of the purification method for dioxin analysis in human serum and temporal changes in background dioxin levels in the general population

335

Optimization of the quantitative direct solid total-reflection X-ray fluorescence analysis of glass microspheres functionalized with Zr organometallic compounds

336

Optimization of the quantitative direct solid total-reflection X-ray fluorescence analysis of glass microspheres functionalized with Zr organometallic compounds

337

Optimization of the radial matching section for the prototype RFQ

338

Optimization of the radial matching section for the prototype RFQ

339

Optimization of the radiation shielding mass for the magnet coils of the VISTA spacecraft

340

Optimization of the reaction parameters for fast pseudo single-phase transesterification of sunflower oil

341

Optimization of the reaction parameters of epoxidation of allyl alcohol with hydrogen peroxide over TS-2 catalyst Original Research Article

342

Optimization of the reactional medium and a food impact study for a colorimetric in situ Salmonella spp. detection method

343

Optimization of the reactivity control drum system of ELECTRA

344

Optimization of the reactor configuration on the performance of the cyclic working mode of thermochemical transformers: Reactor miniaturization

345

Optimization of the readout electronics for a superheated superconducting granule particle detector

346

Optimization of the recoil-direction-sensitive target for muon capture

347

Optimization of the recording scheme for fast holographic response in photorefractive polymers

348

Optimization of the refractive index plasmonic sensing of gold nanorods by non-uniform silver coating

349

Optimization of the removal efficiency of nitrogen oxides in the air using a low-pressure Hg lamp

350

Optimization of the Removal of Toluene in the Air by Activated Carbon / ZIF-8 Metal-Organic Framework

351

Optimization of the repeated irritancy test (RIT) for the efficacy assessment of protective creams

352

Optimization of the rheological properties of alumina slurries for ceramic processing applications Part I: Slip-casting

353

Optimization of the rheological properties of alumina slurries for ceramic processing applications Part II: Spray-drying

354

Optimization of the rheological properties of nanometer sized tetragonal polycrystal zirconia slurries for aqueous-gel-tape-casting processing

355

Optimization of the rheological properties of yttria suspensions

356

Optimization of the rice bran oil deacidification process by liquid–liquid extraction Original Research Article

357

Optimization of the Right-hand Sides of Multi-point and Integral Conditions of the Controlled Dynamic System

358

Optimization of the Ritz method to calculate axisymmetric natural vibration frequencies of cylinders

359

Optimization of the roasting of robusta coffee (C. canephora conillon) using acceptability tests and RSM

360

Optimization of the rod chain model to simulate the motions of a long flexible fiber in simple shear flows

361

Optimization of the room-temperature phosphorescence of the 6-bromo-2-naphthol–α-cyclodextrin system in aqueous solution

362

Optimization of the Runge–Kutta iteration with residual smoothing

363

Optimization of the Sample Preparation Procedure for the Conversion of Enriched 28Si Single Crystal to Enriched Gaseous 28SiF4

364

Optimization of the scan protocols for CT-based material extraction in small animal PET/CT studies

365

Optimization of the scan protocols for CT-based material extraction in small animal PET/CT studies

366

Optimization of the Scratch Test for specific coating designs

367

Optimization of the selectivity of a cyanopropyl stationary phase for the gas chromatographic analysis of trans fatty acids

368

Optimization of the separation and on-line sample concentration of phenethylamine designer drugs with capillary electrophoresis–fluorescence detection

369

Optimization of the separation and purification of Al13

370

Optimization of the separation lactic acid enantiomers in body fluids by capillary electrophoresis

371

Optimization of the separation of a complex mixture of natural and synthetic anabolic steroids by micellar liquid chromatography

372

Optimization of the separation of a group of antifungals by capillary zone electrophoresis

373

Optimization of the separation of anticonvulsant agents in mixed micellar liquid chromatography by experimental design and regression models

374

Optimization of the separation of anticonvulsant agents in mixed micellar liquid chromatography by experimental design and regression models Original Research Article

375

Optimization of the separation of lysergic acid diethylamide in urine by a sweeping technique using micellar electrokinetic chromatography

376

Optimization of the separation of malachite green in water by capillary electrophoresis Raman spectroscopy (CE-RS) based on the stacking and sweeping modes

377

Optimization of the separation of phenolic compounds by micellar electrokinetic capillary chromatography

378

Optimization of the separation of two species in a chemostat

379

Optimization of the separation of Vinca alkaloids by nonaqueous capillary electrophoresis

380

Optimization of the sequential polymerization synthesis method for polypyrrole films

381

Optimization of the sequential polymerization synthesis method for polypyrrole films

382

Optimization of the shape of a wing in a hypersonic nonequilibrium gas flow

383

Optimization of the Sharia Supervisory Board in Its Supervisory Function on Sharia Principles (A Study on Sharia Banking in Lhokseumawe City)

384

Optimization of the shear strengths of ultrasonically consolidated Ti/Al 3003 dual-material structures

385

Optimization of the Signal to Noise Ratio in EFTEM Elemental Maps with Regard to Different Ionization Edge Types

386

Optimization of the silicon sensors for the CMS tracker

387

Optimization of the silicon sensors for the CMS tracker

388

Optimization of the silicon sensors for the CMS tracker

389

Optimization of the simultaneous determination of imatinib and its major metabolite, CGP74588, in human plasma by a rapid HPLC method using D-optimal experimental design

390

Optimization of the simultaneous localization and map-building algorithm for real-time implementation

391

Optimization of the single-step synthesis of hybrid C8 silica monoliths dedicated to nano-liquid chromatography and capillary electrochromatography

392

Optimization of the size and yield of graphene oxide sheets in the exfoliation step

393

Optimization of the skew angle of rotor poles in permanent magnet machines based on the inverse problem method

394

Optimization of the slowly actively Q-switched laser

395

Optimization of the Smart Grids Connected using an Improved P&O MPPT Algorithm and Parallel Active Filters

396

Optimization of the solvent extraction of bioactive polyphenolic compounds from aquatic fern Azolla microphylla using response surface methodology

397

Optimization of the sonication extraction method of Hibiscus tiliaceus L. flowers

398

Optimization of the sonication extraction method of Hibiscus tiliaceus L. flowers

399

Optimization of the Sono-Biodiesel in the Attendance of ZnO Nanoparticles, Process Yield Enhancement: Box Behnken Design

400

Optimization of the span angle and location of vortex generators in a plate-fin and tube heat exchanger

401

Optimization of the specific rate of refrigeration in combined refrigeration cycles

402

Optimization of the split-step Fourier method in modeling optical-fiber communications systems

403

Optimization of the Splitter Blade Configuration and Geometry of a Centrifugal Pump Impeller using Design of Experiment

404

Optimization of the spray-drying process for developing guava powder using response surface methodology

405

Optimization of the sputtering process parameters of GZO films using the Grey–Taguchi method

406

Optimization of the stabilized performance of amorphous silicon solar cells deposited at high growth rates by de-coupling of gas and superstrate temperatures

407

Optimization of the static and dynamic characteristics of plates with isogrid stiffeners

408

Optimization of the Static Human Osteoblast/Osteoclast Co-culture System

409

Optimization of the Sterilization and Establishment Steps for Almonds 2-22 Genotype

410

Optimization of the stochastic dynamic production cycling problem by a genetic algorithm

411

Optimization of the Stochastic Home Health Care Routing and Scheduling Problem with Multiple Hard Time Windows

412

Optimization of the strain aging resistance in aluminum killed steels produced by continuous annealing

413

Optimization of the strain rate to achieve exceptional mechanical properties of 304 stainless steel using high speed ultrasonic surface mechanical attrition treatment Original Research Article

414

Optimization of the strength of SOFC anode supports

415

OPTIMIZATION OF THE STRESS-STATE IN THERMOELASTIC SHELLS BASED ON GENERALIZED ENERGY CRITERIA

416

Optimization of the structural parameters of new potentiometric pH and urea sensors based on polyaniline and a polysaccharide coupling layer

417

Optimization of the structure of an H-beam with either a flat or a corrugated web: Part 3. Development and research on H-beams with wholly corrugated webs

418

Optimization of the structure of polyurethanes for bone tissue engineering applications

419

Optimization of the structure-switching aptamer-based fluorescence polarization assay for the sensitive tyrosinamide sensing Original Research Article

420

Optimization of the supercritical fluid coextraction of oil and diterpenes from spent coffee grounds using experimental design and response surface methodology

421

Optimization of the supercritical fluid extraction of triterpenic acids from Eucalyptus globulus bark using experimental design

422

Optimization of the supply chain network: Simulation, Taguchi, and Psychoclonal algorithm embedded approach

423

Optimization of the surface texture for silicon carbide sliding in water

424

Optimization of the Surveillance Test Interval of the Safety Systems at the Plant Level

425

Optimization of the switch-on and switch-off transition in a commercial laser

426

OPTIMIZATION OF THE SYNCHRONIZATION BANDWIDTH OF RATIONALLY SYNCHRONIZED OSCILLATORS BASED ON BIFURCATION CONTROL

427

Optimization of the synthesis conditions for LaNiO3 catalyst by microwave assisted citrate method for hydrogen production Original Research Article

428

Optimization of the synthesis conditions of LiCoO2 for lithium secondary battery by ultrasonic spray pyrolysis process

429

Optimization of the synthesis of 1-allyloxy-2-hydroxy-propyl-starch through statistical experimental design

430

Optimization of the synthesis of 1-allyloxy-2-hydroxy-propyl-starch through statistical experimental design

431

Optimization of the synthesis of 4′-nonafluorobutylacetophenone by metal catalysed cross-coupling reaction

432

Optimization of the synthesis of a nano-sized mica-hematite pearlescent pigment

433

Optimization of the synthesis of polyurethane acrylates with polyester compounds

434

Optimization of the synthesis of UiO-66-NH2 catalyst and its application for removing organophosphorus pesticides from wastewater

435

Optimization of the synthesis parameters of high surface area ceria nanopowder prepared by surfactant assisted precipitation method

436

Optimization of the T policy M/G/1 queue with server breakdowns and general startup times

437

Optimization of the technological parameters of a sulfamic tinning electrolyte for reducing slime formation

438

Optimization of the technology for applying slag skull to the lining of 375-ton converters.

439

Optimization of the temperature sensor position in a hot wire probe set up for estimation of the thermal properties of foods using optimal experimental design Original Research Article

440

Optimization of the temporal response of II-VI direct type semiconductor detectors for flat-panel pulsed X-ray imaging

441

Optimization of the tether-assisted return mission of a guided re-entry capsule

442

OPTIMIZATION OF THE THERMAL COMFORT PROPERTIES OF BED LINEN USING DIFFERENT SOFTENING FORMULATIONS

443

Optimization of the thermal environment of columns packed with very fine particles

444

Optimization of the thermal performance of PCM nanocomposites

445

Optimization of the thermodynamic model of aqua-ammonia absorption refrigeration systems

446

Optimization of the thermoelectric properties of poly[Cux(Cu-ethylenetetrathiolate)]

447

Optimization of the thickness of a conducting polymer, polyaniline, deposited on the surface of poly(vinyl chloride) membranes: A new way to improve their potentiometric response Original Research Article

448

Optimization of the thickness of a photocatalytic film on the basis of the effectiveness factor

449

Optimization of the Thread Take-up Lever Mechanism in Lockstitch Sewing Machine Using the Imperialistic Competitive Algorithm

450

Optimization of the TIEC/AMTEC cascade cell for high efficiency

451

Optimization of the Timing of Induction for the Assessment of Nitric Oxide Production in Leishmania major Infected Macro-phage Cells

452

OPTIMIZATION OF THE TMD PARAMETERS TO SUPPRESSTHE VERTICAL VIBRATIONS OF SUSPENSION BRIDGESSUBJECTED TO EARTHQUAKE EXCITATIONS

453

Optimization of the trace element determination by ICP-MS in human blood serum

454

Optimization of the transesterification reaction in biodiesel production

455

Optimization of the transition piece applying genetic algorithms

456

Optimization of the transmitter-receiver separation in the ground-penetrating radar

457

Optimization of the transport of aminic substrates

458

Optimization of the transportation expense of a firm with contractual supplies

459

Optimization of the truss-type structures using the generalized perturbation-based Stochastic Finite Element Method

460

Optimization of the tubular absorber using a compound parabolic concentrator

461

Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire

462

Optimization of the uidA gene transfer into somatic embryos of rose via Agrobacterium tumefaciens

463

Optimization of the ultrafast look-locker echo-planar imaging T1 mapping sequence

464

Optimization of the ultrasonic assisted removal of methylene blue by gold nanoparticles loaded on activated carbon using experimental design methodology

465

Optimization of the ultrasonic assisted removal of methylene blue by gold nanoparticles loaded on activated carbon using experimental design methodology

466

Optimization of the ultrasonically assisted extraction of polysaccharides from Zizyphus jujuba cv. jinsixiaozao Original Research Article

467

Optimization of the ultrasound-assisted extraction process of aspartic acid from molasses and its anti-scaling capability in sugar industry evaporators

468

Optimization of the ultrasound-assisted synthesis of allyl 1-naphthyl ether using response surface methodology

469

Optimization of the ultrasound-assisted synthesis of allyl 1-naphthyl ether using response surface methodology

470

Optimization of the ultrasound-assisted synthesis of lutein disuccinate using uniform design

471

Optimization of the ultrasound-assisted synthesis of lutein disuccinate using uniform design

472

Optimization of the UO2 kernel coating process by 2D simulation of spouted bed dynamics in the coater

473

Optimization of the urban building efficiency potential for mid-latitude climates using a genetic algorithm approach

474

OPTIMIZATION OF THE VARIABLE REFRIGERANT FLOW SYSTEMS BY USE OF GENETIC ALGORITHM an‎d ENERGY, EXERGY, an‎d ECONOMIC ANALYSIS FOR THREE COOLANT FLUIDS

475

Optimization of the volume H− ion source extraction system for the Spallation Neutron Source accelerator utilizing 3D magnet and ion optics codes

476

Optimization of the volume H− ion source extraction system for the Spallation Neutron Source accelerator utilizing 3D magnet and ion optics codes

477

Optimization of the volumetric accuracy of high-speed computer numerical control milling Twith dynamic quality characteristics

478

Optimization of the WEDM process of particle-reinforced material with multiple performance characteristics using grey relational analysis

479

Optimization of the weights and asymmetric activation function family of neural network for time series forecasting

480

Optimization of the well locations and completions for vertical and horizontal wells using a derivative-free optimization algorithm

481

Optimization of the working cycle for a hydrogen production and power generation plant based on aluminum combustion with water

482

Optimization of the working fluid in a Joule–Thomson cold stage Original Research Article

483

Optimization of the writing and erasing characteristics of MO tri-layered films using the non-magnetic intermediate layer

484

Optimization of the writing and erasing characteristics of MO tri-layered films using the non-magnetic intermediate layer

485

Optimization of the β-Aminoester class of factor Xa inhibitors. part 1: P4 and side-Chain modifications for improved In vitro potency

486

Optimization of the β-Aminoester class of factor Xa inhibitors. part 2: Identification of FXV673 as a potent and selective inhibitor with excellent In vivo anticoagulant activity

487

Optimization of Thermal Conductivity of Al2O3 Nanofluid by Using ANN and GRG Methods

488

Optimization of thermal curing cycle for a large epoxy model

489

Optimization of Thermal Decomposition Conditions of Bone to Achieve the Highest Percentage of Crystalline Phase in Bone Char using Gene Expression Programming and Artificial Neural Network

490

Optimization of Thermal Instability Resistance of FG Flat Structures using an Improved Multi-objective Harmony Search Algorithm

491

Optimization of thermal insulation to achieve energy savings in low energy house (refurbishment)

492

Optimization of thermal performance of a building with ground source heat pump system

493

Optimization of Thermal Performance of Windows in Intermediate Housing in Cold and Dry Climate of Tabriz

494

Optimization of thermal performances and pressure drop of rectangular microchannel heat sink using aqueous carbon nanotubes based nanofluid

495

Optimization of thermal processes in a variable air volume HVAC system

496

Optimization of thermal processes using an Eulerian formulation and application in laser surface hardening

497

Optimization of thermal remendability of epoxy via blending

498

Optimization of thermal resistance and bottom wall temperature uniformity for double-layered microchannel heat sink

499

Optimization of thermal systems based on finite-time thermodynamics and thermoeconomics

500

Optimization of thermal treatment parameters to alter austenitic phase transition temperature of NiTi alloy for medical implant

501

Optimization of thermal treatment parameters to alter austenitic phase transition temperature of NiTi alloy for medical implant

502

Optimization of thermal treatment parameters to alter austenitic phase transition temperature of NiTi alloy for medical implant

503

Optimization of thermal-dilute sulfuric acid pretreatment for enhancement of methane production from cassava residues

504

Optimization of thermally impregnated Ni–olivine catalysts for tar removal Original Research Article

505

Optimization of thermoacoustic refrigerators using second law analysis

506

Optimization of thermo-alkaline disintegration of sewage sludge for enhanced biogas yield

507

Optimization of thermo-elasto-plastic processes using Eulerian sensitivity analysis

508

Optimization of thermoelectric generator module spacing and spreader thickness used in a waste heat recovery system

509

Optimization of thermoelectric heat pumps by operating condition management and heat exchanger design

510

Optimization of thermoelectric topping combined steam turbine cycles for energy economy

511

Optimization of Thermomechanical Parameters to Produce an Ultra-High Strength Compressor Disk

512

Optimization of thermophilic fermentative hydrogen production by the newly isolated Caloranaerobacter azorensis H53214 from deep-sea hydrothermal vent environment

513

Optimization of thermostable amylopullulanase production in solid state fermentation by Clostridium thermosulfurogenes SVM17 through Plackett-Burman and response surface methodological approaches

514

Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells

515

Optimization of thin conical frusta for impact energy absorption

516

Optimization of thin-film design for multi-layer dielectric grating

517

Optimization of thin-foil based phosphor screens for CCD imaging in TEM in the voltage range of 80–400 kV

518

Optimization of thin-foil based phosphor screens for CCD imaging in TEM in the voltage range of 80–400 kV

519

Optimization of third harmonic ground-fault protection systems of unit-connected generators grounded through neutralizer

520

Optimization of Three Dimensional Culturing of the HepG2 Cell Line in Fibrin Scaffold

521

Optimization of three gas compositions in a CO2 laser

522

Optimization of three new compositions of stabilized rammed earth incorporating PCM: Thermal properties characterization and LCA

523

Optimization of three-dimensional positron annihilation spectroscopy system (3DPASS) for three-dimensional momentum measurements

524

Optimization of three-dimensional positron annihilation spectroscopy system (3DPASS) for three-dimensional momentum measurements

525

Optimization of through-bolt steel beam connection to CFST column reinforced with rib plates using RSM method and MCEO algorithm

526

Optimization of throwing motion planning for whole-body humanoid mechanism: Sidearm and maximum distance

527

Optimization of Thymol Extraction from Aerial Parts of Thymus vulgaris by the Response Surface Method

528

Optimization of tilt angle for solar panel: Case study for Madinah, Saudi Arabia

529

Optimization of time and temperature of dam construction for thermal analysis of roller compacted concrete dam

530

Optimization of time integration schemes coupled to spatial discretization for use in CAA applications

531

Optimization of Time, Cost and Quality in Critical Chain Method Using Simulated Annealing

532

Optimization of timing and frequency of application of the antagonist Ulocladium atrum for management of gray mold in potted rose under high disease pressure

533

Optimization of timing in the Carr-Purcell-Meiboom-Gill sequence

534

Optimization of TiO2 modified poly(vinyl alcohol) thin film composite nanofiltration membranes using Taguchi method Original Research Article

535

Optimization of TiO2/Fe(III)/solar UV conditions for the removal of organic contaminants in pulp mill effluents Original Research Article

536

Optimization of tissue processing for immunohistochemistry for the detection of human glypican-3

537

Optimization of tissue segmentation of brain MR images based on multispectral 3D feature maps

538

Optimization of titanium alloy (6Al–4V) machining

539

Optimization of titanium cutting by factorial analysis of the pulsed Nd:YAG laser parameters

540

OPTIMIZATION OF TMD PARAMETERS FOR EARTHQUAKE VIBRATIONS OF TALL BUILDINGS INCLUDING SOIL STRUCTURE INTERACTION

541

Optimization of Tomato Slices Drying in a Continuous Infrared-Assisted Refractance WindowTM Dryer Using Response Surface Methodology

542

Optimization of tool path in two points incremental forming

543

optimization of topography and surface properties of polyacrylonitrile-based electrospun scaffolds via nonoclay concentrations and its effect on osteogenic differentiation of human mesenchymal stem cells

544

Optimization of total alkannin yields of Alkanna tinctoria by using sub- and supercritical carbon dioxide extraction

545

Optimization of total polysaccharide extraction from Dioscorea nipponica Makino using response surface methodology and uniform design

546

Optimization of Total Soluble Solids and Carbon Dioxide Gas Pressure for the Preparation of Carbonated Beverages from Apple and Pear Juices

547

Optimization of totally irreversible refrigerators and heat pumps

548

Optimization of toughness and strength in multiphase intermetallics

549

Optimization of tower crane and material supply locations in a high-rise building site by mixed-integer linear programming

550

Optimization of TQFP molding process using neuro-fuzzy-GA approach

551

Optimization of Trace Metal Ion Binding Properties of a Novel Schiff Base Using Response Surface Methodology

552

Optimization of traffic flow conditions by minimization of quadratic functionals

553

Optimization of Trailing Edge Ejection Mixing Losses: A Theoretical and Experimental Study

554

Optimization of Trailing Edge Ejection Mixing Losses: A Theoretical and Experimental Study

555

Optimization of traits to increasing barley grain yield using an artificial neural network

556

Optimization of tramadol–PVC membrane electrodes using miscellaneous plasticizers and ion-pair complexes

557

Optimization of transdermal delivery using magainin pore-forming peptide Original Research Article

558

Optimization of transesterification conditions for the production of fatty acid methyl ester (FAME) from Chinese tallow kernel oil with surfactant-coated lipase

559

Optimization of transesterification for methyl ester production from chicken fat

560

Optimization of transesterification of animal fat ester using response surface methodology

561

Optimization of transesterification of castor oil with ethanol using a central composite rotatable design (CCRD)

562

Optimization of transesterification of Jatropha curcas Oil to Biodiesel using Response Surface Methodology and its Adulteration with Kerosene

563

Optimization of Transient Expression of uidA Gene in Androgenic Embryos of Wheat (Triticum aestivum L. cv. Falat) via Particle Pombardment

564

optimization of transient focal cerebral ischemia model by middle cerebral artery occlusion

565

Optimization of transit route network, vehicle headways and timetables for large-scale transit networks

566

Optimization of transition curve of casing cavity of profiled chamber flow sensor

567

Optimization of transition maneuvers through aerodynamic vectoring

568

Optimization of transition-edge calorimeter performance

569

Optimization of transition-edge calorimeter performance

570

Optimization of transmission near infrared spectrometry procedures for quality control of pesticide formulations Original Research Article

571

Optimization of transparent conductor-embedding front electrodes for efficient light management

572

Optimization of transport protocols in complex networks

573

Optimization of transportation requirements in the deployment of military units

574

Optimization of transverse shear moduli for composite honeycomb cores

575

Optimization of Trauma Care: A Two‑tiered Inhospital Trauma Team Response System

576

Optimization of Travelling Salesman Problem on Single Valued Triangular Neutrosophic Number using Dhouib-Matrix-TSP1 Heuristic

577

OPTIMIZATION OF TREE-STRUCTURED GAS DISTRIBUTION NETWORK USING ANT COLONY OPTIMIZATION: A CASE STUDY

578

Optimization of triaryl bis-sulfones as cannabinoid-2 receptor ligands

579

Optimization of triarylimidazoles for Tie2: Influence of conformation on potency

580

Optimization of tribological and mechanical properties of epoxy through hybrid filling

581

Optimization of triploidy induction in the blacklip abalone, Haliotis rubra (Leach, 1814), using 6dimethylaminopurine

582

Optimization of tri-reformer reactor to produce synthesis gas for methanol production using differential evolution (DE) method

583

Optimization of Trypsin-like Protease Production by Lactobacillus plantarum FNCC 0270 using Response Surface Methodology

584

Optimization of Tryptophan Production in Bacteria. Design of a Strategy for Genetic Manipulation of the Tryptophan Operon for Tryptophan Flux Maximization

585

Optimization of tube potential–filter combinations for film-screen mammography, : A contrast detail phantom study

586

Optimization of tunable laser glasses with the aid of dielectric relaxation and adsorption measurements

587

OPTIMIZATION OF TUNING OF A GYRODIN SYSTEM WITH MINIMAL REDUNDANCY

588

OPTIMIZATION OF TUNING OF A GYRODIN SYSTEM WITH MINIMAL REDUNDANCY

589

Optimization of Tunnel Reinforcements by Genetic Algorithm with the Aim of Replacing with Fibers

590

Optimization of turbine blade cooling with the aim of overall turbine performance enhancement

591

Optimization of turbulent jet mixing

592

Optimization of Turn Geometries for Microchip Electrophoresis

593

Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis Review Article

594

Optimization of Turning Parameters for Titanium Alloy Ti-6Al-4V ELI Using the Response Surface Method (RSM )

595

Optimization of two different dispersive liquid–liquid microextraction methods followed by gas chromatography–mass spectrometry determination for polycyclic aromatic hydrocarbons (PAHs) analysis in water

596

Optimization of two methods based on ultrasound energy as alternative to European standards for soluble salts extraction from building materials

597

Optimization of two methods based on ultrasound energy as alternative to European standards for soluble salts extraction from building materials

598

Optimization of two methods for the analysis of hydrogen peroxide: High performance liquid chromatography with fluorescence detection and high performance liquid chromatography with electrochemical detection in direct current mode

599

Optimization of two step karanja biodiesel synthesis under microwave irradiation

600

Optimization of two-component composite armor against ballistic impact

601

Optimization of two-dimensional gas chromatography time-of-flight mass spectrometry for separation and estimation of the residues of 160 pesticides and 25 persistent organic pollutants in grape and wine

602

Optimization of two-dimensional gradient liquid chromatography separations

603

Optimization of Two-Dimensional IIR Filters With Nonseparable and Separable Denominator

604

Optimization of two-phase thermophilic anaerobic digestion of biowaste for hydrogen and methane production through reject water recirculation

605

Optimization of two-sided assembly line balancing with resource constraints using modified particle swarm optimisation

606

Optimization of two-stage fractionation process for lignocellulosic biomass using response surface methodology (RSM)

607

Optimization of two-stage production/inventory systems under order base stock policy with advance demand information

608

Optimization of two-stage thermoelectric coolers with two design configurations

609

Optimization of two-staged bio-hydrogen production by immobilized Microcystis aeruginosa

610

Optimization of two-step block method with three hybrid points for solving third order initial value problems

611

Optimization of two-step transesterification production of biodiesel from neem (Azadirachta indica) oil

612

Optimization of type-2 fuzzy systems based on bio-inspired methods: A concise review

613

Optimization of tyrosinase inhibition activity of ultrasonic-extracted polysaccharides from longan fruit pericarp

614

Optimization of ultrafilter feed conditions using classical filtration models

615

Optimization of ultrasonic extraction of 23 elements from cotton

616

Optimization of ultrasonic extraction of 23 elements from cotton

617

Optimization of ultrasonic extraction of polysaccharides from dried longan pulp using response surface methodology

618

Optimization of ultrasonic extraction of polysaccharides from dried longan pulp using response surface methodology

619

Optimization of ultrasonic extraction process of polysaccharides from Ornithogalum Caudatum Ait and evaluation of its biological activities

620

Optimization of ultrasonic extraction process of polysaccharides from Ornithogalum Caudatum Ait and evaluation of its biological activities

621

Optimization of Ultrasonic Reactor Geometry for Biodiesel Production using Response Surface Methodology

622

Optimization of ultrasonic treatment of rose myrtle mash in the extraction of juice with high antioxidant level

623

Optimization of ultrasonic-assisted extraction (UAE) of betulin from white birch bark using response surface methodology

624

Optimization of ultrasonic-assisted extraction (UAE) of betulin from white birch bark using response surface methodology

625

Optimization of ultrasonic-assisted extraction and in vitro antioxidant activities of polysaccharides from Trametes orientalis

626

Optimization of ultrasonic-assisted extraction of bioactive alkaloid compounds from rhizoma coptidis (Coptis chinensis Franch.) using response surface methodology

627

Optimization of ultrasonic-assisted extraction of natural antioxidants from rice bran using response surface methodology

628

Optimization of ultrasonic-assisted extraction of natural antioxidants from rice bran using response surface methodology

629

Optimization of ultrasonic-assisted extraction of pomegranate (Punica granatum L.) seed oil

630

Optimization of ultrasonic-assisted extraction of pomegranate (Punica granatum L.) seed oil

631

Optimization of ultrasonic-assisted extraction of water-soluble polysaccharides from Boletus edulis mycelia using response surface methodology

632

Optimization of ultrasonic-assisted extraction process of Poria cocos polysaccharides by response surface methodology

633

Optimization of ultrasonic-assisted extraction process of Poria cocos polysaccharides by response surface methodology

634

Optimization of Ultrasonic-assisted Friction Stir Welded using Taguchi Approach

635

Optimization of ultrasonic-assisted heterogeneous biodiesel production from palm oil: A response surface methodology approach

636

Optimization of ultrasound assisted extraction of antioxidant compounds from marjoram (Origanum majorana L.) using response surface methodology

637

Optimization of ultrasound assisted extraction of antioxidant compounds from marjoram (Origanum majorana L.) using response surface methodology

638

Optimization of ultrasound assisted extraction of bioactive components from brown seaweed Ascophyllum nodosum using response surface methodology

639

Optimization of ultrasound assisted extraction of bioactive components from brown seaweed Ascophyllum nodosum using response surface methodology

640

Optimization of ultrasound assisted-emulsification-dispersive liquid–liquid microextraction by experimental design methodologies for the determination of sulfur compounds in wines by gas chromatography–mass spectrometry Original Research Article

641

Optimization of ultrasound extraction condition of phospholipids from palm-pressed fiber Original Research Article

642

Optimization of ultrasound extraction of phenolic compounds from coconut (Cocos nucifera) shell powder by response surface methodology

643

Optimization of ultrasound extraction of phenolic compounds from coconut (Cocos nucifera) shell powder by response surface methodology

644

Optimization of ultrasound parameters for cardiac gene delivery of adenoviral or plasmid deoxyribonucleic acid by Ultrasound-Targeted microbubble destruction

645

Optimization of ultrasound-accelerated synthesis of enzymatic caffeic acid phenethyl ester by response surface methodology

646

Optimization of ultrasound-accelerated synthesis of enzymatic caffeic acid phenethyl ester by response surface methodology

647

Optimization of Ultrasound-Assisted Acidic-Solvent Extraction of Colchicine from Colchicum kurdicum (Bornm.) Stef. Using Response Surface Methodology

648

Optimization of ultrasound-assisted extraction (UAE) of flavonoids compounds (FC) from hawthorn seed (HS)

649

Optimization of ultrasound-assisted extraction (UAE) of flavonoids compounds (FC) from hawthorn seed (HS)

650

Optimization of ultrasound-assisted extraction of anthocyanins in red raspberries and identification of anthocyanins in extract using high-performance liquid chromatography–mass spectrometry

651

Optimization of ultrasound-assisted extraction of anthocyanins in red raspberries and identification of anthocyanins in extract using high-performance liquid chromatography–mass spectrometry

652

Optimization of ultrasound-assisted extraction of Lingzhi polysaccharides using response surface methodology and its inhibitory effect on cervical cancer cells

653

Optimization of Ultrasound-Assisted Extraction of Polyphenol Content from Zea mays Hairs (Waste)

654

Optimization of ultrasound-assisted extraction of polyphenols from spruce wood bark

655

Optimization of ultrasound-assisted extraction of polyphenols from spruce wood bark

656

Optimization of Ultrasound-assisted Extraction of Quince Seed Gum through Response Surface Methodology

657

Optimization of ultrasound-assisted garlic extraction using response surface methodology

658

Optimization of UMTS Network Planning Using Genetic Algorithms

659

Optimization of unbalance distribution in rotating machinery with localized non linearity

660

Optimization of unique, uncharged thioesters as inhibitors of HIV replication Original Research Article

661

Optimization of univariate and multivariate exponentially weighted moving-average control charts using genetic algorithms

662

Optimization of urease immobilization onto non-porous HEMA incorporated poly(EGDMA) microbeads and estimation of kinetic parameters

663

OPTIMIZATION OF UTILIZATION OF CALF RENNET AND ADULT BOVINE RENNET MIXTURES IN DOMIATI CHEESE MAKING

664

Optimization of UV treatment to induce haploid androgenesis in the stinging catfish, Heteropneustes fossilis

665

Optimization of Vacuum Frying Parameters in Combination with Osmotic Dehydration of Kiwi Slices to Produce Healthy Product

666

Optimization of vane mist eliminators

667

Optimization of vapor compression refrigeration cycle considering a binary mixture of working fluids using evolutionary algorithms

668

Optimization of variable speed wind power systems based on a LQG approach

669

Optimization of variable stiffness composites with embedded defects induced by Automated Fiber Placement

670

Optimization of variable valve timing for maximizing performance of an unthrottled SI engine—a theoretical study

671

Optimization of variables for screening solid-supported metal complexes as oxidation catalysts

672

Optimization of variables in grinding brass particles for paint and pigment industry

673

Optimization of variables on the supercritical fluid extraction of high-boiling organic compounds in house-dust

674

Optimization of Vasopressin Type 2 Receptor Expression in Escherichia coli BL21

675

Optimization of Vegetable Oil Leaching from Spent Nickel Catalyst and Validation of the Results

676

Optimization of vendor-managed inventory systems in a rolling horizon framework

677

Optimization of ventilated roofs for livestock housing

678

Optimization of Ventilation Register Locations for Reducing Suspended Particle Concentration Using the Taguchi Method

679

Optimization of ventilation system design and operation in office environment, Part I: Methodology

680

Optimization of ventilation systems in office environment, Part II: Results and discussions

681

Optimization of vertex detector for International Linear Collider

682

OPTIMIZATION OF VERTICAL ALIGNMENT OF HIGHWAYS IN TERMS OF EARTHWORK COST USING COLLIDING BODIES OPTIMIZATION ALGORITHM

683

Optimization of very high gravity fermentation process for ethanol production from industrial sugar beet syrup

684

Optimization of vesicular stomatitis virus-G pseudotyped feline immunodeficiency virus vector for minimized cytotoxicity with efficient gene transfer

685

Optimization of VI/II pressure ratio in ZnTe growth on GaAs(0 0 1) by molecular beam epitaxy

686

Optimization of view ordering for motion artifact suppression

687

Optimization of Vinegar Production from Nipa (Nypa fruticans Wurmb.) Sap Using Surface Culture Fermentation Process

688

OPTIMIZATION OF VISCOELASTIC JUNCTIONS WITH REGARD TO TRANSMISSION OF WAVE ENERGY

689

Optimization of viscoelastic properties of low-fat stirred yogurt using mixture-process variable experiments

690

Optimization of Viscozyme L-assisted extraction of oat bran protein using response surface methodology

691

Optimization of vitellogenin latex agglutination (VTG-LAT), for field determination of male fish contamination by estrogen mimics: Study of adsorption and agglutination profiles

692

Optimization of volatile fatty acid production with co-substrate of food wastes and dewatered excess sludge using response surface methodology

693

Optimization of volume fractions for functionally graded panels considering stress and critical temperature

694

Optimization of volunteer labor assignments

695

Optimization of VUV characteristics and morphology of BaMgAl10O17:Eu2+ phosphor particles in spray pyrolysis

696

Optimization of warehouse location through fuzzy multi-criteria decision making methods

697

Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents

698

Optimization of Waste Collection System Using Underground Containers with Source Separation Plan (Case Study: District 3 of Yazd Municipality, Iran)

699

Optimization of waste gate in the diesel engines with turbocharger

700

Optimization of waste heat utilization in oil field development employing a transcritical Organic Rankine Cycle (ORC) for electricity generation

701

Optimization of wastes content in ceramic tiles using statistical design of mixture experiments

702

Optimization of wastewater treatment alternative selection by hierarchy grey relational analysis

703

Optimization of water and air management systems for a passive direct methanol fuel cell

704

Optimization of water and nitrogen application to menthol mint (Mentha arvensis L.) through sugarcane trash mulch in a sandy loam soil of semi-arid subtropical climate

705

Optimization of water assisted chemical vapor deposition parameters for super growth of carbon nanotubes Original Research Article

706

Optimization of water desalination using carbon-based adsorbents Original Research Article

707

Optimization of Water Distribution and Water Quality by Hybrid Genetic Algorithm

708

Optimization of Water Distribution Network Design Using the Shuffled Frog Leaping Algorithm

709

Optimization of water distribution networks using developed binary genetic algorithm and hydraulic model software

710

Optimization of water networks in industrial processes

711

Optimization of Water Permeability of “Green” Non-Woven Filter Media from Lignocellulosic Fibers Using Taguchi Method

712

Optimization of water quantity and quality in Mahabad River by SWAT model

713

Optimization of water uptake and photosynthetic parameters in an ecosystem model using tower flux data

714

Optimization of water uptake and photosynthetic parameters in an ecosystem model using tower flux data

715

Optimization of Water-Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology

716

Optimization of water-cooled chiller system with load-based speed control

717

Optimization of water-cooled chiller system with load-based speed control

718

Optimization of water-in-oil nanoemulsions by mixed surfactants

719

Optimization of wavelet decomposition for image compression and feature preservation

720

Optimization of Wear Behaviour on Mg-TiO2 Nanocomposite Using Taguchi Grey Relational Analysis

721

Optimization of weave of carbon fabric for best combination of strength and tribo-performance of polyetherimide composites in adhesive wear mode

722

Optimization of web newspaper layout in real time

723

Optimization of web search techniques using frequency analysis

724

Optimization of web-core steel sandwich decks at concept design stage using envelope surface for stress assessment

725

OPTIMIZATION OF WEDGE-SHAPED PARTS FOR INJECTION MOLDING AND INJECTION COMPRESSION MOLDING

726

Optimization of weighted correlated multiple responses using a probabilistic index

727

Optimization of weld bead geometry for stainless steel claddings deposited by FCAW

728

Optimization of Well Production by Designing a Core pipe in one of the Southwest oil Wells of Iran

729

Optimization of wet micro-blasting on PVD films with various grain materials for improving the coated tools’ cutting performance

730

Optimization of wet oxidation pretreatment of wheat straw

731

Optimization of wettability and adhesion in reactive nickel-based alloys/alumina systems by a thermodynamic approach

732

Optimization of wettability and adhesion in reactive nickel-based alloys/alumina systems by a thermodynamic approach

733

Optimization of whey protein concentrate and sodium chloride concentrations and cooking temperature of sous vide cooked whole-muscle beef from Argentina

734

Optimization of Whey Treatment in Rotating Biological Contactor: Application of Taguchi Method

735

Optimization of whole cell-catalyzed methanolysis of soybean oil for biodiesel production using response surface methodology

736

Optimization of wigglers side poles

737

Optimization of wigglers side poles

738

Optimization of wind turbine micrositing: A comparative study

739

Optimization of Windows to Enhance Daylight and Thermal Performance Based on Genetic Algorithm Case Study: a Residential Building With a Common Plan in Tabriz, Iran

740

Optimization of wine headspace analysis by solid-phase microextraction capillary gas chromatography with mass spectrometric and flame ionization detection

741

Optimization of winglet vortex generators combined with riblets for wall/fluid heat exchange enhancement

742

Optimization of wire electrical discharge machining for pure tungsten using a neural network integrated simulated annealing approach

743

Optimization of work loading for the die and tool shop

744

Optimization of Working Conditions During Push Bending Process

745

Optimization of Wrap Angle in the Mixed Flow Impeller for Reducing Flow Losses

746

Optimization of Xanthan Gum Production from Grape Juice Concentrate Using Plackett-Burman Design and Response Surface Methodology

747

Optimization of xanthophylls extraction from Marigold extractum with supercritical CO2 by response surface methodology

748

Optimization of X-ray energy resolution from a horizontally focused single-crystal monochromator

749

Optimization of X-ray energy resolution from a horizontally focused single-crystal monochromator

750

Optimization of X-ray fluorescence elemental analysis: an example from Kenya

751

Optimization of x-ray imaging geometry (with specific application to flat-panel cone-beam computed tomography)

752

Optimization of X-shaped louvered fin and tube heat exchangers while maintaining the physical meaning of the performance evaluation criterion

753

Optimization of xylanase and mannanase production by Bacillus circulans strain BL53 on solid-state cultivation

754

Optimization of xylitol recovery by crystallization from synthetic solutions using response surface methodology Original Research Article

755

Optimization of Yarrowia lipolytica’s β-oxidation pathway for γ-decalactone production

756

Optimization of yellow phosphorescent organic light-emitting devices based on triplet exciton diffusion length

757

Optimization of yield and water-use of different cropping systems for sustainable groundwater use in North China Plain

758

Optimization of zeolite Beta by steaming and acid leaching for the acylation of anisole with octanoic acid: a structure–activity relation

759

Optimization of zeta potential distributions for minimal dispersion in an electroosmotic microchannel

760

Optimization of zeta potential profile for low-dispersion flows in microchannel turns

761

Optimization of zeta potential profile for low-dispersion flows in microchannel turns Original Research Article

762

Optimization of zinc phosphate coating on 7075-T6 aluminum alloy

763

Optimization of Zn2+-containing mobile phase for simultaneous determination of kynurenine, kynurenic acid and tryptophan in human plasma by high performance liquid chromatography

764

Optimization of ZnO sheets dimension in terms of ductility, micro-indentation, mechanical resistance, Amlouk-Boubaker optothermal expansivity and crystallites size

765

Optimization of Zr-based hydrogen storage alloys for nickel-hydride batteries

766

Optimization of α-acylaminoketone ecdysone agonists for control of gene expression

767

Optimization of α-amylase production for the green synthesis of gold nanoparticles

768

Optimization of β/near-β forging process parameters of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si by using processing maps

769

Optimization of β-carotene production by an indigenous isolate of Dunaliella salina under salinity-gradient stress

770

Optimization of β-carotene production by Rhodotorula glutinis DM28 in fermented radish brine

771

Optimization ofbiochemicalsystemsthroughmathematicalprogramming:Methods and applications

772

Optimization ofConformal Mapping Functions used in Developing Closed-Form Solutions for Underground Structures with Conventional cross Sections

773

Optimization on a Grassmann manifold with application to system identification

774

Optimization on Antenna Selection Using Imperialist Competitive Algorithm

775

Optimization on dielectric properties of Y2Ti2O7 ceramics with Bi2O3-Nd2O3-Nb2O5 co-doping

776

Optimization on indoor air diffusion of floor-standing type room air-conditioners

777

Optimization on Lie manifolds and pattern recognition

778

Optimization on preparation conditions of Rehmannia glutinosa polysaccharide liposome and its immunological activity

779

Optimization on proportion for recycled aggregate in concrete using two-stage mixing approach

780

Optimization on response surface models for the optimal manufacturing conditions of dairy tofu Original Research Article

781

optimization on rubber seed oil epoxidation process parameters using response surface methodology

782

Optimization on technical parameters for fabrication of SDC film by screen-printing used as electrolyte in IT-SOFC Original Research Article

783

Optimization on the HFCVD setup for the mass-production of diamond-coated micro-tools based on the FVM temperature simulation

784

Optimization on the performance characteristics of a three-source chemical pump affected by multi-irreversibilities

785

Optimization on tribological properties of aramid fibre and CaSO4 whisker reinforced non-metallic friction material with analytic hierarchy process and preference ranking organization method for enrichment evaluations

786

Optimization over state feedback policies for robust control with constraints

787

Optimization over the efficient set of a parametric multiple objective linear programming problem

788

Optimization parameters for BDE in BNCT using near threshold 7Li(p,n)7Be direct neutrons

789

Optimization parameters to prepare chitosan nanoparticles containing sulfacetamide sodium

790

Optimization Performance Parameters of OHNS Die Steel using Dimensional Analysis Intergrated with Desirability Function

791

Optimization PHAs Production from Dairy Industry Wastewater (Cheese Whey) by Azohydromonas lata DSMZ 1123

792

Optimization pitch angle controller of rocket system using improved differential evolution algorithm

793

Optimization Planning Model for Carbon Dioxide Emissions Reduction Via Renewable Energy Switch in a Coal Power Station

794

Optimization problems for an energy functional with mass constraint revisited

795

Optimization problems for bioheat equation

796

Optimization Problems for Curved Mechanical Structures

797

Optimization problems for eigenvalues of -Laplace equations

798

Optimization problems for general simple population with n-impulsive harvest

799

Optimization problems for one-impulsive models from population dynamics Original Research Article

800

Optimization Problems for the Navier-Stokes Equations with Regular Boundary Controls

801

Optimization problems for weighted graphs and related correlation estimates Original Research Article

802

Optimization problems in multiple subtree graphs Original Research Article

803

Optimization problems in multivariable fuzzy predictive control Original Research Article

804

Optimization problems in the estimation of parameters of thin films and the elimination of the influence of the substrate

805

Optimization problems on general classes of rearrangements Original Research Article

806

Optimization problems on the performance of a nonreliable terminal system

807

OPTIMIZATION PROBLEMS ON THRESHOLD GRAPHS

808

Optimization Problems Solving with Using of Discrete Harmony Search Algorithm: A Review

809

Optimization procedure for algorithms of task scheduling in high performance heterogeneous distributed computing systems

810

Optimization procedure of a hybrid photovoltaic wind energy system

811

Optimization procedures for GMAW of bimetal pipes

812

Optimization Process for the Synthesis of Polyol-Oleates from Malaysian Unsaturated Palm Fatty Acid Distillate

813

Optimization processes of a CO2 measurement set-up for assessing biodegradability of polymers

814

Optimization Production Conditions on the Amount of Nitrogen Compounds in Iranian Fish Sauce (Mahyaveh)

815

Optimization schemes for decomposition of fuzzy relations

816

Optimization selection of the thermal conductivity of the top ceramic layer in the Double-Ceramic-Layer Thermal Barrier Coatings based on the finite element analysis of thermal insulation

817

Optimization sequence of infill well-drilling using Latin hypercube plus radial basis function network

818

Optimization stacking by transient pseudo-isotachophoresis for capillary electrophoresis: example analysis of plasma glutathione

819

Optimization strategies accounting for the additive in preparative chiral liquid chromatography

820

Optimization strategies for CPU and GPU implementations of a smoothed particle hydrodynamics method Original Research Article

821

Optimization strategies for non-linear material parameters identification in metal forming problems

822

Optimization strategies for off-line two-dimensional liquid chromatography

823

Optimization strategies for parametric analysis of thin-film reflectivity spectra

824

Optimization strategies for the analysis and purification of drug discovery compounds by reversed-phase high-performance liquid chromatography with high-pH mobile phases

825

OPTIMIZATION STRATEGIES IN UNSTRUCTURED MESH GENERATION

826

Optimization strategies on the structural modeling of gelatin/chitosan scaffolds to mimic human meniscus tissue

827

Optimization strategies to reduce the biodiesel NOx effect in diesel engine with experimental verification

828

Optimization strategy and validation of one chromatographic method as approach to determine the phenolic compounds from different sources

829

Optimization strategy for a small-scale reverse osmosis water desalination system based on solar energy

830

Optimization studies for CP- and T-violation

831

Optimization studies for CP- and T-violation

832

Optimization studies in an Inverse Fluidized Bed Bioreactor for Starch Wastewater Treatment

833

Optimization studies of a Compton suppression spectrometer using experimentally validated Monte Carlo simulations

834

Optimization studies of a Compton suppression spectrometer using experimentally validated Monte Carlo simulations

835

Optimization studies on acid hydrolysis of oil palm empty fruit bunch fiber for production of xylose

836

Optimization studies on integrated wind energy systems

837

Optimization studies on the features of an activated charcoal-supported urease system

838

Optimization Studies on Thrust Force and Torque during Drilling of Natural Fiber Reinforced Sandwich Composites

839

Optimization Study and Characterization of Microcrystalline Cellulose Isolated from Coconut Husk via Hydrolysis using Ionic Liquid

840

Optimization study and heat transfer comparison of staggered circular and elliptic tubes in forced convection

841

Optimization study for BNCT facility based on a DT neutron generator

842

Optimization study for metabolomics analysis of human sweat by liquid chromatography–tandem mass spectrometry in high resolution mode

843

Optimization study of a single-effect water–lithium bromide absorption refrigeration system powered by flat-plate collector in hot regions

844

Optimization study of a transportable neutron radiography unit based on a compact neutron generator

845

Optimization study of a transportable neutron radiography unit based on a compact neutron generator

846

Optimization Study of Calcium Leaching From Steelmaking Slag Original Research Article

847

Optimization study of combined refrigeration cycles driven by an engine

848

Optimization study of ethanolic fermentation from oil palm trunk, rubberwood and mixed hardwood hydrolysates using Saccharomyces cerevisiae

849

Optimization Study of Flocculation Mixing by Means of Grids

850

Optimization study of hybrid spot-welded/bonded single-lap joints

851

Optimization Study of Isolated Building using Shape Memory Alloy with Friction Pendulum System under Near-fault Excitations

852

Optimization study of Sonogashira cross-coupling reaction on high-loading macrobeads using a silyl linker

853

Optimization study of stacked micro-channel heat sinks for micro-electronic cooling

854

Optimization study of the leaching of roasted zinc sulphide concentrate with sulphuric acid solutions

855

OPTIMIZATION STUDY OF THE OPERATING CONDITIONS TO IMPROVE THE QUALITY OF SURFACES COATING OBTAINED BY PLASMA SPRAYING PROCESS

856

Optimization Study on the Effects of Shear Rate and Concentration of Inhibitor on Wax and Asphaltene Deposition from Crude Oil using Copolymer and Aromatic Compounds

857

Optimization study on the normal conducting center post for the low aspect ratio tokamak reactor

858

Optimization study to determine the appropriate location for the implementation of silicon doping in Tehran research reactor

859

Optimization system for combined heat and electricity production in the wood-processing industry

860

Optimization system for valve control in intelligent wells under uncertainties

861

Optimization Task Scheduling Algorithm in Cloud Computing

862

Optimization Technique for Dynamic Reconfiguration of Programmable Analog/Digital Arrays

863

Optimization Technique for Grounding Grids Design

864

Optimization Technique for the Evaluation of Physiochemical Properties of Cationic Surfactant in Presence of Alkali / Metal Halide Salt and their Effects on Acidic Crude Oil

865

Optimization techniques applied to multiple manipulators for path planning ، torque minimization

866

Optimization techniques for a photovoltaic water pumping system

867

Optimization techniques for carbodiimide activated synthesis of poly((RS)-3,3,3-trifluorolactic acid); statistically designed experiments to optimize polymerization conditions

868

Optimization Techniques for Design a shell and tube heat exchanger from an economic viewpoint

869

Optimization techniques for parallel force-decomposition algorithm in molecular dynamic simulations Original Research Article

870

Optimization techniques for parallel molecular dynamics using domain decomposition Original Research Article

871

Optimization techniques to improve energy efficiency in power systems

872

Optimization the Adhesive Production from Sugar Cane Bagasse

873

Optimization the annealling time of membrane PSF19%DMF for palm oil mill effluent treatment

874

Optimization the Availability of a System with Short Circuit and Common Cause Failures

875

Optimization the Efficiency of Gas Turbines for Air Pollution Reduction

876

Optimization the machining parameters by using VIKOR and Entropy Weight method during EDM process of Al–18% SiCp Metal matrix composite

877

Optimization the number of nurses in the emergency department using linear programming technique

878

Optimization the Performance and Emission Parameters of a CI Engine Fueled with Aviation Fuel-Biodiesel-Diesel Blends

879

Optimization the process variables for the fractionation of Saccharina japonica to enhance glucan content

880

Optimization the soda-AQ process for cellulose pulp production and energy content of black liquor from L. leucocephala K360

881

Optimization theory application to slitted plate bending problems

882

Optimization through simulation for the Belle detector upgrade

883

Optimization through simulation for the Belle detector upgrade

884

OPTIMIZATION TO IDENTIFYMUSKINGUM MODEL PARAMETERS USING IMPERIALIST COMPETITIVE ALGORITHM

885

OPTIMIZATION TO IDENTIFYMUSKINGUM MODEL PARAMETERS USING IMPERIALIST COMPETITIVE ALGORITHM

886

Optimization to the tube–fin contact status of the tube expansion process

887

Optimization tools for design and marketing of new/improved products using the house of quality

888

Optimization under frequency-dependent selection

889

Optimization under fuzzy if–then rules

890

Optimization under uncertainty: generality and application to multimodal transport

891

Optimization under Uncertainty: Machine Learning Approach

892

Optimization with additional variables and constraints

893

Optimization with binet matrices

894

Optimization with different methods for material processing parameters

895

Optimization with extremal dynamics for the traveling salesman problem

896

Optimization with few violated constraints for linear bounded error parameter estimation

897

Optimization with Genetic Algorithm (GA): Planar mechanism synthesis

898

Optimization with numerical simulations of the conjugate altitudes of deformable mirrors in an MCAO system

899

Optimization with simulation and multiobjective analysis in industrial decision-making: A case study

900

Optimization with the time-dependent Navier-Stokes equations as constraints

901

Optimization, block designs and No Free Lunch theorems

902

Optimization, characterization and nanofiltration properties test of MWNTs/polyester thin film nanocomposite membrane

903

OPTIMIZATION, COMPARISON AND APPLICATION OF ADAPTIVE GRID GENERATION METHODS

904

Optimization, conditioning and accuracy of radial basis function method for partial differential equations with nonlocal boundary conditions—A case of two-dimensional Poisson equation

905

Optimization, design and fabrication of a non-cryogenic quantum infrared detector

906

Optimization, dynamics, and enhanced production of a free radical scavenging extracellular polysaccharide (EPS) from hydrodynamic sediment attached Bacillus megaterium RB-05

907

Optimization, Equilibrium and Kinetic Studies of Basic Red 2 Removal onto Waste Gossypium hirsutum Seeds

908

Optimization, evaluation, and characterization of a hollow fiber supported liquid membrane for sampling and speciation of lead(II) from aqueous solutions

909

Optimization, evaluation, and characterization of molecularly imprinted polymers

910

Optimization, Partial Purification, and Characterization of Bioactive Peptides of Lactobacillus paracasei Isolated from Traditional Egyptian Cheese

911

Optimization, preparation and characterization of rutin-quercetin dual drug loaded keratin nanoparticles for biological applications

912

Optimization, Production and Antifungal Activity of Chitinase Produced by Trichoderma harezianum

913

Optimization, purification, characterization and antioxidant activity of an extracellular polysaccharide produced by Paenibacillus polymyxa SQR-21

914

Optimization, resolution and application of composite compact finite difference templates

915

Optimization, Sensitivity Analysis, and Techno-Economic Evaluation of a Multi-Source System for an Urban Community: a Case Study

916

Optimization, validation and comparison of various extraction techniques for the trace determination of polycyclic aromatic hydrocarbons in sewage sludges by liquid chromatography coupled to diode-array and fluorescence detection

917

Optimization-a new tool in a simulation program system [for power networks]

918

OPTIMIZATIONAL STUDY OF FRICTION WELDING OF STEEL TUBE TO ALUMINUM TUBE PLATE USING AN EXTERNAL TOOL PROCESS

919

Optimization-based alignment for inertial navigation systems: Theory and algorithm

920

Optimization-based computation of analytic interpolants of bounded complexity

921

Optimization-based design of fixed-order controllers for command following

922

Optimization-based differential kinematic modeling exhibits a velocity-control strategy for dynamic posture determination in seated reaching movements

923

Optimization-based feasibility study of an active thermal insulator

924

Optimization-based feature selection with adaptive instance sampling

925

Optimization-based manufacturing scheduling with multiple resources, setup requirements, and transfer lots

926

Optimization-based model of tunneling-induced distributed loads acting on the shield periphery

927

OPTIMIZATION-BASED MONITORING-SUPPORTED CALIBRATION OF A THERMAL PERFORMANCE SIMULATION MODEL

928

Optimization-based non-linear Control Law with Increased Robustness for Air Fuel Ratio Control in SI Engines

929

Optimization-based planning heuristic for material flow congestion avoidance in conveyor network design

930

Optimization-based planning heuristic for material flow congestion avoidance in conveyor network design

931

Optimization-based planning to assess the level of disaster in the city

932

Optimization-based posture prediction for human upper body

933

Optimization-based record selection approach to incremental dynamic analysis and estimation of fragility curves

934

Optimization-based remap and transport: A divide and conquer strategy for feature-preserving discretizations

935

Optimization-based sale transactions and hydrothermal scheduling

936

Optimization-based scheduling of construction projects with generalized precedence relationships: A real-life case study

937

Optimization-Based Simulation and Design of Tile Drainage Systems

938

Optimization-based steady state analysis of three phase self-excited induction generator

939

Optimization-based structure identification of dynamical networks

940

Optimization-based synchronized flux-corrected conservative interpolation (remapping) of mass and momentum for arbitrary Lagrangian–Eulerian methods

941

Optimization-enabled electromagnetic transient simulation

942

OptimizationofanuclearfuelspacergridspringusinghomologyconstraintsOriginalResearchArticle

943

Optimizationofseed-blankettypefuelassemblyforreduced-moderationwaterreactorOriginalResearchArticle

944

OptimizationoftheworthshapeofaxiallyvariablestrengthcontrolrodswithsimulationoptimizationmethodologyforthepowermaneuveringofpressurizedwaterreactorsOriginalResearchArticle

945

Optimizations for Risk-Aware Secure Supply Chain Master Planning

946

Optimizations in angular dispersive neutron powder diffraction using divergent beam geometries

947

Optimizations in angular dispersive neutron powder diffraction using divergent beam geometries

948

Optimizations of a GPU accelerated heat conduction equation by a programming of CUDA Fortran from an analysis of a PTX file Original Research Article

949

Optimizations of expression and purification of recombinant HIV- 1 CRF01_AE p24 protein in Escherichia coli for development of immunodiagnostic assay

950

Optimizations of inhibitors compounding and applied conditions in simulated circulating cooling water system Original Research Article

951

Optimizations of large area quasi-solid-state dye-sensitized solar cells

952

Optimizations of packed sorbent and inlet temperature for large volume-direct aqueous injection-gas chromatography to determine high boiling volatile organic compounds in water

953

Optimizations of PID gains by particle swarm optimizations in fuzzy based automatic generation control

954

Optimizations of Sulfolane concentration in propose Sulfinol-M solvent instead of MDEA solvent in the refineries of Sarakhs

955

Optimizations of the subresultant algorithm Original Research Article

956

Optimizations of transverse projected emittance at the photo-injector test facility at DESY, location Zeuthen

957

Optimizations of transverse projected emittance at the photo-injector test facility at DESY, location Zeuthen

958

Optimizations of wear resistance and toughness of hydroxyapatite nickel free stainless steel new bio-composites for using in total joint replacement

959

Optimize Adaptive Coding Techniques to Improve BER in OFDM System

960

OPTIMIZE IRRIGATION WATER USE OF GREEN PEAS UNDER DEFICIT IRRIGATION IN SEMI-ARID REGIONS

961

Optimize routing and reduce latency when sending information among Internet of Things (IoT) nodes

962

Optimize the Extraction Conditions of Pectin Extracted from Saveh Pomegranate Peels

963

Optimize the separation of fluorinated amphiles using high-performance liquid chromatography

964

Optimized ‘inverse activation’ methodology for esterification of hydroxyl-functionalized resins

965

Optimized 3D bright blood MRI of aortic plaque at 3 T

966

Optimized a-C:Wx% coatings with enhanced tribological properties and improved micro-drilling performance

967

Optimized acceleration of repetitive construction projects

968

Optimized access to alkyl thiocyanates

969

Optimized advection of radar reflectivities

970

Optimized age dependent clustering algorithm for prognosis: A case study on gas turbines

971

Optimized Algorithm for Open-Circuit Fault Detection in Switches and Capacitor Voltage Balancing Control in Modular Multilevel Converters

972

Optimized algorithms for predictive range and KNN queries on moving objects

973

Optimized Alignment of a USCG Polar Class Icebreaker Wing Shaft Using a Distributed Bearing Finite-Element Model

974

Optimized Alignment of a USCG Polar Class Icebreaker Wing Shaft Using a Distributed Bearing Finite-Element Model

975

Optimized alkaline pretreatment of sludge before anaerobic digestion

976

Optimized amylolytic enzymes production in Saccharomycopsis fibuligera DSM-70554: An approach to efficient cassava starch utilization

977

Optimized analytical method for cyclosporin A by high-performance liquid chromatography–electrospray ionization mass spectrometry

978

Optimized and Far-Red-Emitting Variants of Fluorescent Protein eqFP611 Original Research Article

979

Optimized and functionalized paper sludge activated with potassium fluoride for single and binary adsorption of reactive dyes

980

Optimized and meta-optimized neural networks for short-term traffic flow prediction: A genetic approach

981

Optimized and Reliable AODV for MANET

982

Optimized and Validated RP-UPLC Method for the Determination of Losartan Potassium and Chlorthalidone in Pharmaceutical Formulations

983

Optimized and validated spectrophotometric methods for the determination of trace amounts of uranium and thorium using 4-chloro-N-(2,6-dimethylphenyl)-2-hydroxy-5-sulfamoylbenzamide

984

Optimized ANFIS-Genetic Algorithm-Particle Swarm Optimization Model for Estimation of Side Orifices Discharge Coefficient

985

Optimized antimicrobial peptide (Bacitracin) production by immobilized and free cells and of Bacillus Spp GU215 using Wood chips and silicon polymer beads

986

Optimized Ar+-ion milling procedure for TEM cross-section sample preparation

987

Optimized Ar+-ion milling procedure for TEM cross-section sample preparation

988

Optimized Arrangement of Clustered Savonius VAWTs, Techno-Economic Evaluation, and Feasibility of Installation

989

Optimized arsenic, selenium and mercury determinations in aqueous solutions by energy dispersive x-ray fluorescence after preconcentration onto zirconium-loaded activated charcoal

990

Optimized arterial trees supplying hollow organs

991

Optimized aspect ratios of restrained thick-wall cylinders by virtue of Poissonʹs ratio selection. Part two: Temperature application

992

Optimized atomic radii for quantum dielectric continuum solvation models

993

Optimized atomic-like orbitals for first-principles tight-binding molecular dynamics

994

Optimized autonomous operations of a 20 K space hydrogen sorption cryocooler Original Research Article

995

Optimized background reduction in low-level gamma-ray spectrometry at a surface laboratory

996

Optimized Bandwidth Utilization for Real Time Applications in Wireless Sensor Networks

997

Optimized basis expansion as an extremely accurate technique for solving time-independent Schrödinger equation

998

Optimized basis functions for coupled channel calculations

999

Optimized basis functions for slot antennas excited by coplanar waveguides

1000

Optimized bath for electroless deposition of palladium on amorphous alumina membranes

بازگشت