<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Improved performance in green light-emitting diodes made with CdSe-conjugated polymer composite
2
Improved performance in silicon enzyme microreactors obtained by homogeneous porous silicon carrier matrix
3
Improved performance in synthetic diamond neutron detectors: Application to boron neutron capture therapy
4
Improved performance in synthetic diamond neutron detectors: Application to boron neutron capture therapy
5
Improved performance in TD-CDMA mobile radio system by optimizing energy partition in channel estimation
6
Improved performance lead iodide nuclear radiation detectors
7
Improved performance lead iodide nuclear radiation detectors
8
Improved performance mechanism of III–V compound triple-junction solar cell using hybrid electrode structure
9
Improved performance of a cellulose-based anion exchanger with tertiary amine functionality for the adsorption of chromium(VI) from aqueous solutions
10
Improved performance of a dye-sensitized solar cell using a TiO2/ZnO/Eosin Y electrode
11
Improved performance of a metal hydride electrode for nickel/metal hydride batteries through copper-coating
12
Improved performance of a tubular microbial fuel cell with a composite anode of graphite fiber brush and graphite granules
13
Improved performance of aminopropylsilatrane over aminopropyltriethoxysilane as a linker for nanoparticle-based plasmon resonance sensors
14
Improved performance of ammonia-fueled solid oxide fuel cell with SSZ thin film electrolyte and Ni-SSZ anode functional layer
15
Improved performance of an activated multi-walled carbon nanotube polymer actuator, compared with a single-walled carbon nanotube polymer actuator
16
Improved performance of an engineering model cryogen free double adiabatic demagnetization refrigerator Original Research Article
17
Improved performance of Black-dye-sensitized solar cells with nanocrystalline anatase TiO2 photoelectrodes prepared from TiCl4 and ammonium carbonate
18
Improved performance of Brucella melitensis native hapten over Brucella abortus OPS tracer on goat antibody detection by the fluorescence polarization assay
19
Improved performance of Brucella melitensis native hapten over Brucella abortus OPS tracer on goat antibody detection by the fluorescence polarization assay
20
Improved performance of carbon nanotube buckypaper and ionic-liquid-in-Nafion actuators for rapid response and high durability in the open air
21
Improved performance of CdTe thin film solar cells through controlling the initial stage of the CdTe layer deposition by close-spaced sublimation
22
IMPROVED PERFORMANCE OF CIRCULARLY POLARIZED ANTENNA USING SEMI-PLANAR CHIRAL METAMATERIAL COVERS
23
Improved Performance of Companded OFDM System using Non Symmetric Approach
24
Improved performance of composite nanofiltration membranes by adding calcium chloride in aqueous phase during interfacial polymerization process
25
Improved performance of comprehensive two-dimensional HPLC separation of traditional Chinese medicines by using a silica monolithic column and normalization of peak heights
26
Improved performance of cross-flow ultrafiltration for the recovery and purification of Ca2+ conditioned lipopeptides in diafiltration mode of operation
27
Improved performance of Cu(In,Ga)Se2-based submodules with a stacked structure of ZnO window prepared by sputtering
28
Improved performance of dye-sensitized solar cells with compact TiO2 blocking layer prepared using low-temperature reactive ICP-assisted DC magnetron sputtering
29
Improved performance of dye-sensitized solar cells with surface-treated TiO2 as a photoelectrode
30
Improved performance of dye-sensitized solar cells: An TiO2–nano-SiO2 hybrid photoanode with post-treatment of TiCl4 aqueous solution
31
Improved performance of gravitational field-flow fractionation for screening wine-making yeast varieties
32
Improved performance of Li hybrid solid polymer electrolyte cells
33
Improved performance of lithium-ion cells with the use of fluorinated carbonate-based electrolytes
34
Improved performance of magnetically recoverable Ce-promoted Ni/Al2O3 catalysts for aqueous-phase hydrogenolysis of sorbitol to glycols
35
Improved performance of MEH-PPV/ZnO solar cells by addition of lithium salt
36
Improved performance of microbial fuel cells enriched with natural microbial inocula and treated by electrical current
37
Improved performance of micro-fabricated preconcentrators using silica nanoparticles as a surface template
38
Improved Performance of Multistage Lattice Vector Quantization with Hybrid Lattice Structure
39
Improved performance of organic light emitting diodes by pentacene as hole transporting layer
40
Improved performance of organic light-emitting diodes using advanced hole-transporting materials
41
Improved performance of organic light-emitting diodes with cesium chloride inside tris (8-hydroxyquinoline) aluminum
42
Improved Performance of PAN-based UF Membrane with PAN-g-PVA Amphiphilic Copolymer
43
Improved performance of Pd electrocatalyst supported on ultrahigh surface area hollow carbon spheres for direct alcohol fuel cells
44
Improved performance of polyaniline-uricase biosensor Original Research Article
45
Improved performance of porous bio-anodes in microbial electrolysis cells by enhancing mass and charge transport
46
Improved Performance of Preordered Fungal Protease—Stearic Acid Biocomposites: Enhanced Catalytic Activity, Reusability, and Temporal Stability
47
Improved performance of protein separation by continuous annular chromatography in the size-exclusion mode
48
Improved performance of PSO with self-adaptive parameters for computing the optimal design of Water Supply Systems
49
Improved performance of PSO with self-adaptive parameters for computing the optimal design of Water Supply Systems
50
Improved performance of Raney nickel electrode by the addition of electrically conductive materials for hydrogen oxidation reaction
51
Improved performance of rechargeable alkaline batteries via surfactant-mediated electrosynthesis of MnO2
52
Improved performance of reverse osmosis with dynamic layers onto membranes in separation of concentrated salt solutions
53
Improved performance of secondary heat exchanger for latent heat recovery from flue gas using mini-tubes
54
Improved performance of Si-based top-emitting organic light-emitting device using MoOx buffer layer
55
Improved Performance of Soil Microbial Fuel Cell by Adding Earthworms
56
Improved performance of solid-state dye-sensitized solar cells with p/p-type nanocomposite electrolyte
57
Improved performance of solution-processable OLEDs by silyl substitution to phosphorescent iridium complexes
58
Improved Performance of Subballast Stabilized Using Geocell for High Speed Train
59
Improved performance of the anion-exchange centrifugation technique for studies with human infective African trypanosomes
60
Improved performance of the greedy algorithm for partial cover
61
Improved performance of the JAERI injection and free electron laser system
62
Improved performance of the JAERI injection and free electron laser system
63
Improved performance of the microbial electrolysis desalination and chemical-production cell using the stack structure
64
Improved performance of the natural-gas-sweetening Benfield-HiPure process using process simulation
65
Improved performance of TiO2 electrodes coated with NiO by magnetron sputtering for dye-sensitized solar cells
66
Improved performance of TiO2 in the selective photo-catalytic oxidation of cyclohexane by increasing the rate of desorption through surface silylation
67
Improved performance of Yarrowia lipolytica lipase-catalyzed kinetic resolution of (R,S)-2-octanol by an integrated strategy of interfacial activation, bioimprinting and immobilization
68
Improved performance of ZnO nanostructured bulk heterojunction organic solar cells with nanowire-density modified by yttrium chloride introduction into solution
69
Improved performance using tungsten carbide/carbon nanofiber based anode catalysts for alkaline direct ethanol fuel cells
70
Improved Performances and Control of Beer Fermentation Using Encapsulated oc-Acetolactate Decarboxylase and Modeling
71
Improved performances in top-emitting organic light-emitting diodes based on a semiconductor zinc oxide buffer layer
72
Improved performances of 36 m small-angle neutron scattering spectrometer BATAN in Serpong Indonesia
73
Improved performances of 36 m small-angle neutron scattering spectrometer BATAN in Serpong Indonesia
74
Improved performances of red organic light-emitting devices by co-doping a rubrene derivative and DCJTB into tris-(8-hydroxyquinoline) aluminum host
75
Improved performances of the fast reactor calculational system ERANOS-ERALIB1 due to improved a priori nuclear data and consideration of additional specific integral data
76
Improved performances of the wind inlet of the Savonius rotor
77
Improved perfusion and contractile reserve after transmyocardial laser revascularization in a model of hibernating myocardium
78
Improved perinatal survival of monoamniotic twins with intensive inpatient monitoring
79
Improved permeate flux by flocculation of biological feeds: comparison between theory and experiment
80
Improved permeation performance of Pluronic F127–polyethersulfone blend ultrafiltration membranes
81
Improved Perovskite Solar Cell Performance Using Semitransparent CNT Layer
82
Improved personalized e-course Composition Approach using Modified Particle Swarm Optimization with Inertia- Coefficient
83
Improved perturbation estimates for the matrix equations X±A*X−1A=Q
84
Improved perturbation method and its application to the IIB matrix model Original Research Article
85
Improved pharmacokinetics, biodistribution and necrosis in vivo using a new near infra-red photosensitizer: tetrahydroporphyrin tetratosylat
86
Improved phase boundary for one-component vapor-liquid equilibrium: incorporating critical behavior and cubic equations of state
87
Improved phase stability and electrochemical performance of (Y,In,Ca)BaCo3ZnO7+δ cathodes for intermediate temperature solid oxide fuel cells
88
Improved phase vocoder time-scale modification of audio
89
Improved phase-change characteristics of Si doped GeSbTe thin films used for phase change memory
90
Improved phase-contrast flow quantification by three-dimensional vessel localization
91
Improved phase-coordinate Gauss-Seidel load flow algorithm
92
Improved phenol decomposition and simultaneous regeneration of granular activated carbon by the addition of a titanium dioxide catalyst under a dielectric barrier discharge plasma Original Research Article
93
Improved phenomenological model for an isothermal winemaking fermentation
94
Improved phenomenological renormalization schemes
95
Improved phosphorous gettering of multicrystalline silicon
96
Improved photo – Hydrogen production by transposon mutant of Rhodobacter capsulatus with reduced pigment
97
Improved photocatalytic activity and adsorption ability of mesoporous potassium-intercalated layered titanate
98
Improved photocatalytic activity of g-C3N4/TiO2 composites prepared by a simple impregnation method
99
Improved photocatalytic activity of highly ordered TiO2 nanowire arrays for methylene blue degradation
100
Improved photocatalytic activity of single crystal ZnO nanorod derived from highly effective P/N heterojunction
101
Improved photo-catalytic activity of single-crystalline TiO2 nanowires surrounded by Pt cube nanoparticles
102
Improved photocatalytic activity of Sn4+-doped and undoped TiO2 thin film coated stainless steel under UV- and VIS-irradiation Original Research Article
103
Improved photocatalytic and antibacterial activities of three-dimensional polycrystalline anatase TiO2 photocatalysts Original Research Article
104
Improved photocatalytic and gas sensing properties of α-Fe2O3 nanoparticles derived from β-FeOOH nanospindles
105
Improved Photocatalytic Degradation of Pharmaceutical Compounds from Aqueous Solutions Using Pd/Zno Nanocomposite as a Model of Environmental Applications
106
Improved photocatalytic deposition of palladium membranes
107
Improved photocatalytic hydrogen generation on Zn2GeO4 nanorods with high crystallinity
108
Improved photocatalytic performance of Pd-doped ZnO
109
Improved Photocatalytic Performance of ZnO through AgCu Bimetal Coupling for the Photodegradation of Nitrobenzene
110
Improved photoconversion from MoSe2 based PEC solar cells
111
Improved photodegradation activity of TiO2 via decoration with SnS2 nanoparticles
112
Improved photoelectrochemical detection of mercury (II) with a TiO2-modified composite photoelectrode
113
Improved photographic production of Pt nano-particles for fuel cell electrodes
114
Improved photoluminescence efficiency of films from conjugated polymers
115
Improved photoluminescence of BaMgAl10O17 blue phosphor prepared by spray pyrolysis
116
Improved photoluminescence of green-emitting phosphor Ca3Sc2Si3O12:Ce3+ for white light emitting diodes
117
Improved photoluminescence of ZnS:Mn nanocrystals by microwave assisted growth of ZnS shell
118
Improved photoluminescence properties of a new green SrB2O4:Tb3+ phosphor by charge compensation
119
Improved photoluminescence properties of oxidized anodically etched porous Zn
120
Improved photophysical property from electrospinning composite fibers doped with Re(I) complex: Construction, characterization and photophysical features
121
Improved photophysical property from electrospinning composite fibers doped with Re(I) complex: Construction, characterization and photophysical features
122
Improved photoreceptor decay characteristics of vanadyl-phthalocyanine films annealed under magnetic field
123
Improved photostability of hydrophobic natural dye incorporated in organo-modified hydrotalcite Original Research Article
124
Improved Photostabilization of Chlorpyrifos Insecticide with Novel Benzil Derivatives
125
Improved phototrophic H2 production with Rhodopseudomonas palustris WP3-5 using acetate and butyrate as dual carbon substrates
126
Improved photovoltaic effect of polymer solar cells on planarized 2D photonic crystals
127
Improved photovoltaic effect of polymer solar cells with nanoscale interfacial layers
128
Improved photovoltaic energy output for cloudy conditions with a solar tracking system
129
Improved photovoltaic method for measurement of minority carrier diffusion length applied to silicon solar cells
130
Improved photovoltaic performance of hybrid solar cells based on silicon nanowire and P3HT
131
Improved photovoltaic performance of hybrid solar cells based on silicon nanowire and P3HT
132
Improved photovoltaic performance of silicon nanowires/conjugated polymer hybrid solar cells
133
Improved photovoltaic performance of silicon nanowires/conjugated polymer hybrid solar cells
134
Improved photovoltaic properties of pentacene/N,N′-Dioctyl-3,4,9,10-perylenedicarboximide-based organic heterojunctions with thermal annealing
135
Improved photovoltaic self-consumption with appliance scheduling in 200 single-family buildings
136
Improved Physical and Mental Health After a Combined Lifestyle Intervention with Cognitive Behavioural Therapy for Obesity
137
Improved physicochemical characteristics of artemisinin-nicotinamide solid dispersions by solvent evaporation and freeze dried methods
138
Improved physicochemical properties and biocompatibility of stainless steel implants by PVA/ZrO2-based composite coatings
139
Improved Physicochemical Properties of Tapioca Starch / Bovine Gelatin Biodegradable Films with Zinc Oxide Nanorod
140
Improved phytase production by a thermophilic mould Sporotrichum thermophile in submerged fermentation due to statistical optimization
141
Improved phytoaccumulation of cadmium by genetically modified tobacco plants (Nicotiana tabacum L.). Physiological and biochemical response of the transformants to cadmium toxicity
142
Improved PID method of temperature control for adiabatic demagnetization refrigerators
143
Improved PID method of temperature control for adiabatic demagnetization refrigerators
144
Improved piezoelectric ceramic/polymer composites for hydrophone applications
145
Improved piezoelectric properties via mechano-chemical activation in modified PCT ceramics
146
Improved piezoelectric switch shunt damping technique using negative capacitance
147
Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio
148
Improved PIN diode circuit model with automatic parameter extraction technique
149
Improved p–i–n solar cells structure for narrow bandgap a-Si:H prepared by Ar* chemical annealing at high temperatures
150
Improved pinhole spatial filter
151
Improved pitting corrosion resistance of AISI 316L stainless steel treated by high current pulsed electron beam
152
Improved plant growth with rock phosphate solubilized by Aspergillus niger grown on sugar-beet waste
153
Improved Plant Regeneration from Cell Suspensions of Commercial Cultivars, Breeding- and Inbred Lines of Perennial Ryegrass (Lolium perenne L.)
154
Improved plastic anisotropy of Mg–Zn–Ca alloys exhibiting high-stretch formability: A first-principles study
155
Improved plasticity and corrosion behavior in Ti–Zr–Cu–Pd metallic glass with minor additions of Nb: An alloy composition intended for biomedical applications
156
Improved plasticity and fracture toughness in metallic glasses via surface crystallization
157
Improved plasticity of bulk metallic glasses by electrodeposition
158
Improved plasticity of iron-based high-strength bulk metallic glasses by copper-induced nanocrystallization
159
Improved plastisol flow and reduced level of plasticiser in paste poly(vinyl chloride) formulations
160
Improved plastisol flow and reduced level of plasticiser in paste poly(vinyl chloride) formulations
161
Improved platinization conditions produce a 60-fold increase in sensitivity of amperometric biosensors using glucose oxidase immobilized in poly-o-phenylenediamine
162
Improved Platinum-Group Element Extraction by NiS Fire Assay from Chromitite Ore Samples Using a Flux Containing Sodium Metaphosphate
163
Improved PLS regression based on SVM classification for rapid analysis of coal properties by near-infrared reflectance spectroscopy
164
Improved Poincaré inequalities with weights ✩
165
Improved point and interval estimation for a beta regression model
166
Improved point center algorithm for K-Means clustering to increase software defect prediction
167
Improved Poisson Intensity Estimation: Denoising Application Using Poisson Data
168
Improved polarization-mode-dispersion tolerance in duobinary transmission
169
Improved poloidal convergence of the MARS code for MHD stability analysis Original Research Article
170
Improved polybenzimidazole films for H3PO4-doped PBI-based high temperature PEMFC
171
Improved polyHEMA–DAQ films for the optical analysis of nitrite
172
Improved polymer nanocomposite dielectric breakdown performance through barium titanate to epoxy interface control
173
Improved polymerization efficiency of methacrylate-based cements containing an iodonium salt
174
Improved polynomial approximations for the solution of nonlinear integral equations
175
Improved polynomialalgorithmsforrobustbottleneckproblemswithintervaldata
176
Improved poly-γ-glutamic acid production by chromosomal integration of the Vitreoscilla hemoglobin gene (vgb) in Bacillus subtilis
177
Improved Population Health in Iran from 1979 to 2019; Decreasing Mortality Rates and Increasing Life Expectancy
178
Improved pore space structure characterization by fusion of relaxation tomography maps
179
Improved porous silicon microarray based prostate specific antigen immunoassay by optimized surface density of the capture antibody Original Research Article
180
Improved Pose Estimation for Mobile Robots by Fusion of Odometry Data and Environment Map
181
Improved position for the flexible laryngeal mask
182
Improved positive electrospray ionization of patulin by adduct formation: Usefulness in liquid chromatography–tandem mass spectrometry multi-mycotoxin analysis
183
Improved Possibilistic C-Means Clustering Algorithms
184
Improved posterobasal segment function after thrombolysis is associated with decreased incidence of significant mitral regurgitation in first inferior myocardial infarction
185
Improved post-myocardial infarction survival with probucol in rats: Effects on left ventricular function, morphology, cardiac oxidative stress and cytokine expression
186
Improved potassium-selective membrane using valinomycin as ionophore for ion-selective microdevices
187
Improved potential function for HOO−/OOH− isomerization
188
Improved potentiometric response of all-solid-state Pb2+-selective electrode
189
Improved potentiometric response of solid-contact lanthanum (III) selective electrode Original Research Article
190
Improved powder X-ray data for cancrinites IV: Franzinite
191
Improved powder X-ray data for the cement phase Ca12O32F2 (C11A7f)
192
Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive
193
Improved power factor in a low-cost PWM single phase inverter using genetic algorithms
194
Improved power generation performance of solid oxide fuel cells using doped LaGaO3 electrolyte films prepared by screen printing method II. Optimization of Ni–Ce0.8Sm0.2O1.9 cermet anode support
195
Improved power quality converter fed permanent magnet AC motor for air-conditioning
196
Improved power quality in a single-phase PWM inverter voltage with bipolar notches through the hybrid genetic algorithms
197
Improved Power System Dynamic Stability by DFIG in the Presence of SSSC Using Adaptive Nonlinear Multi-Input Backstepping
198
Improved precipitation of gibbsite from sodium aluminate solution by adding methanol
199
Improved precision of virtual height measurements with coherent radio pulse sounding based on the maximum likelihood method Original Research Article
200
Improved Precoding Method for PAPR Reduction in OFDM with Bounded Distortion
201
Improved pre-concentration and detection methods for volatile sulphur breath constituents
202
Improved Prediction and Mapping of Soil Copper by Kriging with Auxiliary Data for Cation-Exchange Capacity
203
Improved prediction and tracking of volcanic ash clouds
204
Improved prediction of biomass composition for switchgrass using reproducing kernel methods with wavelet compressed FT-NIR spectra
205
Improved prediction of blast-induced vibrations in limestone mines using Genetic Algorithm
206
Improved prediction of early-onset coronary artery disease using APOE ε4, BChE-K, PPARγ2 Pro12 and ENOS T-786C in a polygenic model
207
Improved prediction of proximal femoral fracture load using nonlinear finite element models
208
Improved Prediction of Signal Peptides: SignalP 3.0
209
Improved prediction of simultaneous local and overall buckling of stiffened panels
210
Improved prediction of springback on final formed components
211
Improved prediction of stability lobes with extended multi frequency solution
212
Improved prediction of the grain size of aluminum alloys that includes the effect of cooling rate
213
Improved prediction of turbulent separated flow with a low-Reynolds-number Nonlinear κ − ε model
214
Improved predictions of equatorial TEC for real time applications Original Research Article
215
Improved predictions of saturated and unsaturated zone drawdowns in a heterogeneous unconfined aquifer via transient hydraulic tomography: Laboratory sandbox experiments
216
Improved predictions of the standard model and the detection of new physics in neutron beta decay
217
Improved predictions penalizing both slope and curvature in additive models
218
IMPROVED PREDICTIVE POWER CONTROL OF CDMA SYSTEM IN RAYLEIGH FADING CHANNEL
219
Improved predictor–corrector method for solving fuzzy initial value problems
220
Improved predictors in survey sampling under a super population model
221
Improved pregnancy rates for obese, infertile women following a group treatment program an open pilot study
222
Improved preliminary test and Stein-rule Liu estimators for the ill-conditioned elliptical linear regression model
223
Improved preparation and structural investigation of 4-aryl-4-oxo-2-hydroxy-2-butenoic acids and methyl esters
224
Improved preparation and synthetic uses of 3-deoxy-d-arabino-hexonolactone: an efficient synthesis of Leptosphaerin
225
Improved preparation of (±)-(1,3/2,4)-5-cyclohexene-1,2,3,4-tetrol [(±)-conduritol-B] and its reaction with hydrobromic and hydrochloric acid; synthesis and characterisation of some (±)-1-deoxy-1-halo- and (±)-1,4-dideoxy-1,4-dihaloconduritols
226
Improved preparation of 2,3:5,6:3′,4′-tri-O-isopropylidenelactose dimethyl acetal and its 6′-O-(1-methoxy-1-methylethyl) derivative
227
Improved preparation of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3,3,1] nonane (DPT) from urea
228
Improved preparation of alkyl 2-(3-indolyl)-3-nitroalkanoates under fully heterogeneous conditions: stereoselective synthesis of alkyl (E)-2-(3-indolyl)-2-alkenoates
229
Improved preparation of immobilized trypsin on superparamagnetic nanoparticles decorated with metal ions
230
Improved preparation of indenyl molybdenum(II) and tungsten(II) compounds
231
Improved Preparation of Macroporous, Chlorosulfonated Poly(styrene-co-divinylbenzene) and Conversion to Sulfonamides and Sulfonylhydrazines
232
Improved preparation of membrane surfaces for field-emission scanning electron microscopy
233
Improved preparation of perallylated cyclodextrins: facile synthesis of cyclodextrin-based polycationic and polyanionic compounds Original Research Article
234
Improved preparation of polybenzo[c]thiophene-modified electrodes employing p-toluenesulfonate as dopant anion
235
Improved preparation of small biological samples for mercury analysis using cold vapor atomic absorption spectroscopy
236
Improved preparation of tosyldiazomethane
237
Improved preparative route toward 3-arylcyclopropenes
238
Improved pretreatment of lignocellulosic biomass using enzymatically-generated peracetic acid
239
Improved Price Indexes for Real Estate: Measuring the Course of Swedish Housing Prices
240
Improved principal component monitoring using the local approach
241
Improved principal component monitoring of large-scale processes
242
Improved priority access, bandwidth allocation and traffic scheduling for DOCSIS cable networks
243
Improved probabilistic method for power system dynamic stability studies
244
Improved probabilistic quantification of drift demands for seismic evaluation
245
Improved probiotic viability in stress environments with post-culture of alginate–chitosan microencapsulated low density cells
246
Improved procedural results of coronary stenting with focal balloon “overexpansion” — final core lab analysis from the prospective, multicenter OSTI-2 trial
247
Improved procedure for cyclization of vinyl azides into 3-substituted-2H-azirines
248
Improved procedure for equivalent linearization of bridges supported on hysteretic isolators
249
Improved procedure for obtaining statistically valid parameter estimates from soil respiration data
250
Improved procedure for obtaining statistically valid parameter estimates from soil respiration data
251
Improved procedure for screening expression libraries for novel autoantigens
252
Improved procedure for the computation of Lamb’s coefficients in the physalis method for particle simulation
253
Improved procedure for the determination of malonaldehyde by gas-chromatography with electron-capture detection as 2,4,6-trichlorophenylhydrazine derivative
254
Improved procedure for the enantioselective synthesis of dihydrooxazolo and dihydrothiazolo ring-fused 2-pyridones
255
Improved procedure for the hydrotelluration of alkynes
256
Improved procedure for the room temperature asymmetric phase-transfer mediated epoxidation of α,β-unsaturated ketones
257
Improved procedure for the separation of major stratum corneum lipids by means of automated multiple development thin-layer chromatography
258
Improved procedure for the synthesis of thiazolium-type peptide coupling reagents: BMTB as a new efficient reagent
259
Improved procedure for the the determination of rofecoxib in human plasma involving 96-well solid-phase extraction and fluorescence detection
260
Improved procedures for the Beckmann rearrangement: the reaction of ketoxime carbonates with boron trifluoride etherate
261
Improved procedures for the laboratory study of high-temperature viscoelastic relaxation
262
Improved procedures for the selective chemical fragmentation of rhamnogalacturonans Original Research Article
263
Improved Process Design and Quality for Gear Manufacturing with Flat and Round Rolling
264
Improved process for decontamination of whey by a continuous flow-through pulsed light system
265
Improved Process for Floodplain Delineation from Digital Terrain Models
266
Improved Process for the Enantioselective Hydrolysis of Prochiral Diethyl Malonates Catalyzed by Pig Liver Esterase
267
Improved process for the production of cellulose sulfate using sulfuric acid/ethanol solution
268
Improved process for the TlBr single-crystal detector
269
Improved process for the TlBr single-crystal detector
270
Improved process monitoring and supervision based on a reliable multi-stage feature-based pattern recognition technique
271
Improved processes of light hydrocarbon separation from LNG with its cryogenic energy utilized
272
Improved processing and oxidation-resistance of ZrB2 ultra-high temperature ceramics containing SiC nanodispersoids
273
Improved processing of carbon nanotube/magnesium alloy composites
274
Improved processing of harmonics and interharmonics by time-domain averaging
275
Improved production by fed-batch cultivation and some properties of Cu/Zn-superoxide dismutase from the fungal strain Humicola lutea 103
276
Improved production of alkaline protease from a mutant of alkalophilic Bacillus pantotheneticus using molasses as a substrate
277
Improved production of butyl butyrate with lipase from Thermomyces lanuginosus immobilized on styrene–divinylbenzene beads
278
Improved production of chitin from shrimp waste by fermentation with epiphytic lactic acid bacteria
279
Improved production of heterologous lipase in Trichoderma reesei by RNAi mediated gene silencing of an endogenic highly expressed gene
280
Improved production of l-asparaginase by Bacillus brevis cultivated in the presence of oxygen-vectors
281
Improved production of mycelial biomass and ganoderic acid by submerged culture of Ganoderma lucidum SB97 using complex media
282
Improved Production of Pharmacologically-active Sclerotiorin by Penicillium sclerotiorum
283
Improved production of phenylethanoid glycosides by Cistanche deserticola cells cultured in an internal loop airlift bioreactor with sifter riser
284
Improved production of p-hydroxycinnamic acid from tyrosine using a novel thermostable phenylalanine/tyrosine ammonia lyase enzyme
285
Improved Production of Recombinant Human Activin A in Escherichia coli
286
Improved production of reducing sugars from rice husk and rice straw using bacterial cellulase and xylanase activated with hydroxyapatite nanoparticles
287
Improved Production of Rhamnolipids by a Pseudomonas aeruginosa Mutant
288
Improved production of short-chain fatty acids from waste activated sludge driven by carbohydrate addition in continuous-flow reactors: Influence of SRT and temperature
289
Improved production of the anticancer compound 1403C by glucose pulse feeding of marine Halorosellinia sp. (No. 1403) in submerged culture
290
Improved production of ZnS blue phosphor powder
291
Improved productivity through failure analysis: Case studies in precision forging of aerospace components
292
Improved productivity using a modified table formwork system for high-rise building in Korea
293
Improved profile likelihood inference
294
Improved profile of bad phosphorylation and caspase 3 activation after blood versus crystalloid cardioplegia
295
Improved Profitability and Competition in Two Level Supply Chain by Non-Cooperative Games
296
Improved prognosis following peritonectomy procedures and hyperthermic intraperitoneal chemotherapy for peritoneal carcinomatosis from appendiceal carcinoma
297
Improved prognosis for biomarkers in breast cancer
298
Improved prognosis of heart failure due to idiopathic dilated cardiomyopathy in children
299
Improved prognosis of postoperative hepatocellular carcinoma patients when treated with functional foods: a prospective cohort study
300
Improved project management through improved document management
301
Improved Projection for Cylindrical Algebraic Decomposition
302
Improved proof of the no-ghost theorem for fermion states of the superstring Original Research Article
303
Improved properties and microstructure of porous silicon nitride/silicon oxide composites prepared by sol–gel route
304
Improved properties of amorphous calcium phosphate fillers in remineralizing resin composites
305
Improved properties of GRC composites using commercial E-glass fibers with new coatings
306
Improved properties of hydroxyapatite–carbon nanotube biocomposite: Mechanical, in vitro bioactivity and biological studies
307
Improved properties of Pulsed Laser Deposited YBaCuO on NdGaO3 using CeO2 template layers
308
Improved properties of the long arc generator (LARGE)
309
Improved properties of the non-covalent coating with N,N-didodecyl-N, N-dimethylammonium bromide for the separation of basic proteins by capillary electrophoresis with acidic buffers in 25 μm capillaries
310
Improved properties of TiAlN coatings through the multilayer structure
311
Improved Properties of Weathered Coal and SBRIWeathered Coal Compound Modified Asphalt.
312
Improved propionic acid production from glycerol with metabolically engineered Propionibacterium jensenii by integrating fed-batch culture with a pH-shift control strategy
313
Improved propionic acid production from glycerol: Combining cyclic batch- and sequential batch fermentations with optimal nutrient composition
314
Improved propionic acid production with metabolically engineered Propionibacterium jensenii by an oxidoreduction potential-shift control strategy
315
Improved prostate cancer control with the use of HDR brachytherapy boost
316
Improved prostate cancer detection with anterior apical prostate biopsies
317
Improved protection from velogenic Newcastle disease virus challenge following multiple immunizations with plasmid DNA encoding for F and HN genes
318
Improved protection from velogenic Newcastle disease virus challenge following multiple immunizations with plasmid DNA encoding for F and HN genes
319
Improved protection of the consumer community against food-transmitted diseases with a microbial aetiology: A pivotal food safety issue calling for a precautionary approach
320
Improved protein-adsorption resistance of polyethersulfone membranes via surface segregation of ultrahigh molecular weight poly(styrene-alt-maleic anhydride)
321
Improved proteomic discovery by sample pre-fractionation using dual-column ion-exchange high performance liquid chromatography
322
Improved protocol for isolation of genomic DNA from leaf tissues of Phyllanthus emblica Gaertn
323
Improved protocol for the formation of N-(p-nitrobenzyloxy)aminoalditol derivatives of oligosaccharides
324
Improved protocol for the synthesis of functionalized triphenylene ketals
325
Improved protocols for quantitative determination of metabolites from biological samples using high performance ionic-exchange chromatography with conductimetric and pulsed amperometric detection
326
Improved Protocols for the Molybdenum-Catalyzed Hydrostannation of Alkynes
327
Improved proton spectroscopic U-FLARE imaging for the detection of coupled resonances in the rat brain in vivo
328
Improved proximate time-optimal sliding-mode control of hard disk drives
329
Improved pseudo-capacitive performance of manganese oxide films synthesized by the facile sol–gel method with iron acetate addition
330
Improved psychomotor performance in aged mice fed diet high in antioxidants is associated with reduced ex vivo brain interleukin-6 production
331
Improved Pt-Ni nanocatalysts for dry reforming of methane Original Research Article
332
Improved Pulmonary Adaptation in Newborn Calves with Postnatal Acidosis
333
Improved pulsed broadband ultrasonic spectroscopy for analysis of liquid-particle flow
334
Improved purification for thermophilic F1F0 ATP synthase using n-dodecyl β-d-maltoside
335
Improved purification of the membrane-bound hydrogenase–sulfur-reductase complex from thermophilic archaea using ϵ-aminocaproic acid-containing chromatography buffers
336
Improved purification of β-lactoglobulin from acid whey by means of ceramic hydroxyapatite chromatography with sodium fluoride as a displacer
337
Improved purity assessment of high-performance liquid chromatography diode array detection data for overcoming the presence of the non-linearity artefact
338
Improved PV/T solar collectors with heat extraction by forced or natural air circulation
339
Improved QCD form factor constraints and Γb → Γcℓν Original Research Article
340
Improved QCM-D signal-to-noise ratio using mesoporous silica and titania
341
Improved q-rung orthopair and T-spherical fuzzy sets
342
Improved QSPR generalized interaction parameters for the nonrandom two-liquid activity coefficient model
343
Improved QSS-μPCD measurement with quality of decay control: Correlation with steady-state carrier lifetime
344
Improved quality and energy performance of a fixed-bed longan dryer by thermodynamic modifications Original Research Article
345
Improved quality and storage of rice flour (MR 220) by rice bran
346
Improved quality control charts for monitoring the process mean, using double-ranked set sampling methods
347
Improved quality control in gas chromatography interfaced to stable isotope ratio mass spectrometry by application of derivative chromatography Original Research Article
348
Improved quality of input data for maintenance optimization using expert judgment
349
Improved Quality of Life in A Case of Cerebral Palsy after Bone Marrow Mononuclear Cell Transplantation
350
Improved quality of life in patients with partial seizures after conversion to oxcarbazepine monotherapy
351
Improved quality of life with cardiac rehabilitation in post-myocardial infarction patients
352
Improved quality of life with jejunal pouch reconstruction after total gastrectomy
353
Improved quality of polycrystalline diamond grown by two-stage growth in microwave plasma chemical vapor deposition
354
Improved quality of polycrystalline diamond grown by two-stage growth in microwave plasma chemical vapor deposition
355
Improved quality of reconstructed images using floating point arithmetic for moment calculation
356
Improved quantification limits in chiral capillary electrochromatography by peak compression effects
357
Improved quantification of active soil microfauna by a "counting crew"
358
Improved quantification of aggregated bacteria by combined enzymatic and mechanical treatment of flocs and biofilm from a rotating drum bioreactor
359
Improved quantification of grain boundary segregation by EDS in a dedicated STEM
360
Improved quantification of grain boundary segregation by EDS in a dedicated STEM
361
Improved quantification of salivary gland scintigraphy by means of factor analysis
362
Improved quantification of stress proteins by western blotting
363
Improved quantile inference via fixed-smoothing asymptotics and Edgeworth expansion
364
Improved quantile inference via fixed-smoothing asymptotics and Edgeworth expansion
365
Improved quantitation in 3QMAS of spin 5/2 nuclei by RF power modulation of FAM-II
366
Improved quantitative detection of 11 urinary phthalate metabolites in humans using liquid chromatography–atmospheric pressure chemical ionization tandem mass spectrometry
367
Improved quantitative ion chromatography of industrial sugars: removal of interfering amino acids
368
Improved quantitative method for fludarabine in human plasma by liquid chromatography and tandem mass spectrometry
369
Improved quantitative solution state 13C NMR analysis of ethylene-1-octene copolymers
370
Improved quantitative structure–activity relationship models to predict antioxidant activity of flavonoids in chemical, enzymatic, and cellular systems Original Research Article
371
Improved Quantity and Quality of Life: A Winning Combination to Treat Advanced Heart Failure
372
Improved quantum-inspired evolutionary algorithm with diversity information applied to economic dispatch problem with prohibited operating zones
373
Improved quarter-point crack tip element
374
Improved quasi-orthogonal codes through constellation rotation
375
Improved Quasi-Path Restoration in Mesh Networks
376
Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications
377
Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications
378
Improved radial basis function methods for multi-dimensional option pricing
379
Improved radial dose function estimation using current version MCNP Monte-Carlo simulation: Model 6711 and ISC3500 125I brachytherapy sources
380
Improved radial heat sink for led lamp cooling
381
Improved radiation damage tolerance of titanium nitride ceramics by introduction of vacancy defects
382
Improved radiation hardness to low-energy protons for oxygenated Si detectors with thermal donors
383
Improved radiation hardness to low-energy protons for oxygenated Si detectors with thermal donors
384
Improved radiation measurements on JET – First results from an upgraded bolometer system
385
Improved radiation tolerance of MAPS using a depleted epitaxial layer
386
Improved radiation tolerance of MAPS using a depleted epitaxial layer
387
Improved radio occultation sounding of the Arctic atmosphere using simulations with a high resolution atmospheric model
388
Improved radioiodination of 1,2-dipalmitoyl-3-IPPA via a tributyltin intermediate
389
Improved radioiodination of biomolecules using exhaustive Chloramine-T oxidation
390
Improved radiometabolite analysis procedure for positron emission tomography (PET) radioligands using a monolithic column coupled with direct injection micellar/high submicellar liquid chromatography
391
Improved rainfall estimation over the Indian region using satellite infrared technique Original Research Article
392
Improved Rainfall Runoff Estimates Using Remotely Sensed Soil Moisture
393
Improved range image segmentation by analyzing surface fit patterns
394
Improved rank-based dependence measures for categorical data
395
Improved Rapid Preparation of Polyelectrolyte-protected Gold Nanoparticles through a Microwave-based Thermal Process
396
Improved rapidly-quenched hydrogen-absorbing alloys for development of improved-capacity nickel metal hydride batteries
397
Improved rate capability of lithium-ion batteries with Ag nanoparticles deposited onto silicon/carbon composite microspheres as an anode material
398
Improved rate control for electron-beam evaporation and evaluation of optical performance improvements
399
Improved ratio estimators of variance based on robust measures
400
Improved rational hydrograph method
401
Improved reaction pattern of an endoglycanase from Paenibacillus cookii for chitosan oligosaccharide production
402
Improved reaction time method, information processing speed, and intelligence
403
Improved reactivity of large coal particles by K2CO3 addition during steam gasification
404
Improved Real-Coded GA for Groundwater Bioremediation
405
Improved real-time RT-PCR assays of two colorectal cancer peripheral blood mRNA biomarkers: A pilot study
406
Improved rechargeability of manganese oxide cathodes in alkaline cells in the presence of TiB2 and TiS2
407
Improved recognition of alkylammonium salts by ion pair recognition based on a novel heteroditopic pillar[5]arene receptor
408
Improved reconstruction of palaeo-environments through unravelling of preserved vegetation biomarker patterns
409
Improved rectangular method on stochastic Volterra equations
410
Improved Recursive Algorithm for Light Scattering by a Multilayered Sphere
411
Improved recursive Newton-type algorithm for frequency and spectra estimation in power systems
412
Improved recursive Newton-type algorithm for power system relaying and measurement
413
Improved recycling of livestock slurries on maize by means of a modular tanker and spreader
414
Improved recycling with life cycle information tagged to the product
415
Improved reduced-bias tail index and quantile estimators
416
Improved refined plastic hinge analysis accounting for strain reversal
417
Improved refined plastic-hinge analysis accounting for local buckling
418
Improved refining properties of pulps pretreated with ionic liquids under mild conditions
419
Improved Regeneration Efficiency from Mature Embryos of Barley Cultivars
420
Improved regionalization of streamflow by use of the streamflow equivalent of precipitation as an explanatory variable
421
Improved regioselective mononitration of toluene over ZSM-5 zeolite catalysts
422
Improved relations for vibrational relaxation in gases
423
Improved relay auto-tuning with static load disturbance
424
Improved reliability for echocardiographic measurement of left ventricular volume using harmonic power imaging mode combined with contrast agent
425
Improved reliability modeling using Bayesian networks and dynamic discretization
426
Improved reliability modeling using Bayesian networks and dynamic discretization
427
Improved reliability of leucite reinforced glass by ion exchange
428
Improved reliability of low-temperature polysilicon TFT by post-annealing gate oxide
429
Improved reliability of wind turbine towers with tuned liquid column dampers (TLCDs)
430
Improved reliable approach to predict melting points of energetic compounds
431
Improved remote sensing detection of soil salinity from a semi-arid climate in Northeast Brazil
432
Improved removal of Trinitrotoluene (TNT) from contaminated soil by inducing aerobic process: kinetic and chemical byproducts
433
Improved reoxidation tolerance of Ni–Fe metal support for LaGaO3 thin film electrolyte cell
434
Improved Repeatability of Pulsed Field Magnetometry Measurements Through Peltier Effect Temperature Control of Measurement Coils Original Research Article
435
Improved replicon cellular activity of non-nucleoside allosteric inhibitors of HCV NS5B polymerase: From benzimidazole to indole scaffolds
436
Improved representation of generator and load dynamics in the study of voltage limited power system operations
437
Improved representation of topographic effects by a vertical adaptive grid in vector-ocean-model (VOM). Part I: Generation of adaptive grids
438
Improved representation of topographic effects by a vertical adaptive grid in Vector-Ocean-Model (VOM). Part II: Simulations in unstructured adaptive grids
439
Improved representations of misorientation information for grain boundary science and engineering
440
Improved reproducibility in scanning capacitance microscopy for quantitative 2D carrier profiling on silicon
441
Improved reproducibility in the determination of the molecular weight of chitosan by analytical size exclusion chromatography
442
Improved reproducibility in the determination of the molecular weight of chitosan by analytical size exclusion chromatography
443
Improved reproducibility of broadband ultrasound attenuation of the os calcis by using a specific region of interest
444
Improved reproducibility of chemical reactions on purified polystyrene resins monitored by 31P MAS NMR
445
Improved reproducibility of high-resolution peripheral quantitative computed tomography for measurement of bone quality
446
Improved reproducibility of magnetic stimulation-evoked motor potentials in the human masseter by a new method for locating stimulation sites on the scalp
447
Improved Residents’ Knowledge after an Advanced Regional Anesthesia Education Program
448
Improved residual method for approximating Bratu problem
449
Improved Resistance Management for Durable Disease Control: A Case Study of Phoma Stem Canker of Oilseed Rape (Brassica napus)
450
Improved resistance of alumina to mild wear by aluminium titanate additions
451
Improved resistance to serum oxidation in Gilbertʹs syndrome: A mechanism for cardiovascular protection
452
Improved resistive switching properties in stacked structures
453
Improved resolution for a multi-fringe phase detection circuit of a far infrared laser interferometer on LHD
454
Improved resolution in dipolar NMR spectra using constant time evolution PISEMA experiment
455
Improved resolution in HREELS using maximum-entropy deconvolution: CO on PtxNi1−x(111)
456
Improved resolution of serum bisalbumin on electrophoresis and investigation of bisalbumin in urine
457
Improved resolution of the multiple inverse method by eliminating erroneous solutions
458
Improved Respirator for Protection Against Exposure to Airborne Viruses
459
Improved response characteristics of SnO2 thin film loaded with nanoscale catalysts for LPG detection
460
Improved response factor methods for seismic fragility of reactor building Original Research Article
461
Improved response function calculations for scintillation detectors using an extended version of the MCNP code
462
Improved response function calculations for scintillation detectors using an extended version of the MCNP code
463
Improved response function for the Simplex optimization of piecewise linear discriminants
464
Improved response matrices of Bonner sphere spectrometers with 6LiI scintillation detector and 3He proportional counter between 15 and 100 MeV
465
Improved response modeling based on clustering, under-sampling, and ensemble
466
Improved response of CdO nanorods towards liquefied petroleum gas (LPG): Effect of Pd sensitization
467
Improved response surface method and its application to stiffened plate reliability analysis
468
Improved Results for Postcardiotomy Cardiogenic Shock With the Use of Implantable Left Ventricular Assist Devices
469
Improved results in supersymmetric electroweak baryogenesis Original Research Article
470
Improved results in the management of surgical candidates with lung cancer
471
Improved results on estimating and extending the radius of an attraction ball
472
Improved results on model reduction for Markovian jump systems with partly known transition probabilities
473
Improved results on stability of continuous-time switched positive linear systems
474
Improved results on the 0–1 multidimensional knapsack problem
475
Improved Results Treating Lung Allograft Failure With Venovenous Extracorporeal Membrane Oxygenation
476
Improved resuscitation training of senior house officers in oral and maxillofacial surgery
477
Improved retention of imidacloprid (Confidor®) in soils by adding vermicompost from spent grape marc
478
Improved retrieval effectiveness by efficient combination of term proximity and zone scoring: A simulation-based evaluation
479
Improved Retrieval of Online Images via Site Operator: Findings at a Website Level
480
Improved retrieval of sea ice total concentration from spaceborne passive microwave observations using numerical weather prediction model fields: An intercomparison of nine algorithms
481
Improved retrievals of cloud boundaries from MODIS for use in air quality modeling
482
Improved retrievals of the optical properties of cirrus clouds by a combination of lidar methods
483
Improved reverse analysis for material characterization with dual sharp indenters
484
Improved reverse thermo-responsive polymeric systems
485
Improved reversed-phase gradient retention modeling
486
Improved reversibility in aged porous silicon NO2 sensors
487
Improved reversibility of color changes in electrochromic Ni–Al layered double hydroxide films in presence of electroactive anions
488
Improved reversible dehydrogenation of LiBH4–MgH2 composite by the synergistic effects of Al and MgO
489
Improved reversible dehydrogenation properties of 2LiBH4–MgH2 composite by milling with graphitic carbon nitride
490
Improved reversible dehydrogenation properties of LiBH4–MgH2 composite by tailoring nanophase structure using activated carbon
491
Improved reversible hydrogen storage of LiAlH4 by nano-sized TiH2
492
Improved RF modeling techniques for enhanced AlGaN/GaN HFETs
493
Improved Rheological Model of OilBased Drilling Fluid for Southwestern Iranian Oilfields
494
Improved ridge estimators in a linear regression model
495
Improved Riemann solvers for complex transport in two-dimensional unsteady shallow flow
496
Improved right heart function with a compliant inflow artificial lung in series with the pulmonary circulation
497
Improved right ventricular–vascular coupling during active pulmonary hypertension
498
Improved rigorous coupled-wave analysis for polar magnetic gratings Original Research Article
499
Improved Risk Assessment for Abdominal Aortic Aneurysm Rupture: Off-the-Wall Imaging
500
Improved Ritter reaction with CF3-containing oxirane for an access to central units of protease inhibitors
501
Improved road traffic emission inventories by adding mean speed distributions
502
Improved robust absolute stability criteria for uncertain time-delay systems
503
Improved robust backstepping adaptive control for nonlinear discrete-time systems without overparameterization
504
Improved robust Bayes estimators of the error variance in linear models
505
Improved robust H2 and H∞ filtering for uncertain discrete-time systems
506
Improved robustness and consistency of 3D contact algorithms based on a dual mortar approach
507
Improved room-temperature hydrogen sensing performance of directly formed Pd/WO3 nanocomposite
508
Improved rotary vane expander for trans-critical CO2 cycle by introducing high-pressure gas into the vane slots
509
Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors
510
Improved rounding procedures for the discrete version of the capacitated EOQ problem
511
Improved route planning and scheduling of waste collection and transport
512
Improved Routh-Pade approximants: a computer-aided approach
513
Improved routine speciation of organotin compounds in environmental samples by pulsed flame photometric detection
514
Improved RP-HPLC method to determine neferine in dog plasma and its application to pharmacokinetics
515
Improved RSA accuracy with DLT and balanced calibration marker distributions with an assessment of initial-calibration
516
Improved ruggedness for flow-based kinetic methods of analysis
517
Improved Runge-Kutta Methods for Solving Ordinary Differential Equations
518
Improved RuO4-catalysed oxidative cyclisation of geraniol-type 1,5-dienes to cis-2,5-bis(hydroxymethyl)tetrahydrofuranyldiols
519
Improved salt tolerance in canola (Brasica napus) plants by overexpression of Arabidopsis Na+/H+ antiporter gene AtNHX1
520
Improved salt tolerance of jute plants expressing the katE gene from Escherichia coli
521
Improved sample complexity estimates for statistical learning control of uncertain systems
522
Improved sample preparation and rapid UHPLC analysis of SO2 binding carbonyls in wine by derivatisation to 2,4-dinitrophenylhydrazine
523
Improved sample preparation for the quantitative analysis of paroxetine in human plasma by stable isotope dilution negative ion chemical ionisation gas chromatography–mass spectrometry
524
Improved sample treatment and chromatographic method for the determination of isoflavones in supplemented foods
525
Improved sample treatment for the determination of bisphenol A and its chlorinated derivatives in sewage sludge samples by pressurized liquid extraction and liquid chromatography–tandem mass spectrometry
526
Improved sample treatment for the determination of insoluble soap in sewage sludge samples by liquid chromatography with fluorescence detection
527
Improved sampling methods document decline in soil organic carbon stocks and concentrations of permanganate oxidizable carbon after transition from swidden to oil palm cultivation
528
Improved sampling techniques for baked clay and soft sediments
529
Improved sand surface element for residual stress determination
530
Improved satisfaction of university faculty by utilizing the Bat metaheuristic algo- rithm (Case study of the faculty of humanities, Islamic Azad University, Parand Branch)
531
Improved Saturation Relay Test for Systems with Large Dead Time
532
Improved scalar shift correlation NMR spectroscopy in solids
533
Improved scaling rules for bandgaps in graphene nanomeshs
534
Improved scaling technique for two-phase pressure—saturation relationships
535
Improved scene classification using efficient low-level features and semantic cues
536
Improved Scene Reconstruction from Range Images
537
Improved scheme of chelation ion chromatography with a mixed eluent for the simultaneous analysis of transition metals at μg l−1 levels
538
Improved scintillation proportionality and energy resolution of LaBr3:Ce at 80 K
539
Improved scintillation proportionality and energy resolution of LaBr3:Ce at 80 K
540
Improved scintimammography using a high-resolution camera mounted on an upright mammography gantry
541
Improved scintimammography using a high-resolution camera mounted on an upright mammography gantry
542
Improved score tests for one-parameter exponential family models
543
Improved screening capabilities in forensic toxicology by application of liquid chromatography–tandem mass spectrometry Original Research Article
544
Improved Screening for Breast Cancer Associated with a Telephone-Based Risk Assessment
545
Improved screening for methyldibromoglutaronitrile allergy
546
Improved screening method for the detection of a range of nitroimidazoles in various matrices by optical biosensor Original Research Article
547
Improved Screening of cDNAs Generated by mRNA Differential Display Enables the Selection of True Positives and the Isolation of Weakly Expressed Messages
548
Improved screening procedure for biogenic amine production by lactic acid bacteria
549
Improved Sea Ice Parcel Trajectories in the Arctic via Data Assimilation
550
Improved sea level anomaly prediction through combination of data relationship analysis and genetic programming in Singapore Regional Waters
551
Improved sealing treatments for thick thermal barrier coatings
552
Improved search heuristics for the sa-tree
553
Improved seawater intake and pre-treatment system based on Neodren technology Original Research Article
554
Improved secretion of Candida antarctica lipase B with its native signal peptide in Pichia pastoris
555
Improved sectoral allocation of NMVOC emissions from solvent use in Greece Original Research Article
556
Improved Secure Searchable Asymmetric Encryption for Cloud Storage Services
557
Improved security of a dynamic remote data possession checking protocol for cloud storage
558
Improved sedimentation field-flow fractionation separation channel for concentrated cellular elution
559
Improved Segmental Isotope Labeling Methods for the NMR Study of Multidomain or Large Proteins: Application to the RRMs of Npl3p and hnRNP L
560
Improved segmentation of meteorite micro-CT images using local histograms
561
Improved segmentation of X-ray tomography data from porous rocks using a dual filtering approach
562
Improved Seismic Design of Structural Frames by Optimization of Equivalent Lateral Load Pattern
563
Improved Seismic Performance of Chevron Brace Frames Using Multi-Pipe Yield Dampers
564
Improved seismic response of multi-span bridges retrofitted with compound restrainers
565
Improved selection and management of the auricular composite graft donor site
566
Improved selection criteria for ordering stat venous ultrasounds from the emergency department
567
Improved selection of LMW over HMW proteins from human plasma by mesoporous silica particles with external modification
568
Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning
569
Improved selective acetone sensing properties of Co-doped ZnO nanofibers by electrospinning
570
Improved selective cholesterol adsorption by molecularly imprinted poly(methacrylic acid)/silica (PMAA–SiO2) hybrid material synthesized with different molar ratios
571
Improved Selectivity for Cu(II) of Methyl-Substituted Poly(pyrazolyl)borates, [HB(3-Mepz)3]- and [B(3-Mepz)4]-, through Steric Contact
572
Improved selectivity for the analysis of maternal serum and cord serum for polyfluoroalkyl chemicals
573
Improved selectivity for the binding of naphthyridine dimer to guanine–guanine mismatch Original Research Article
574
Improved selectivity in detection of polar basic drugs by liquid chromatography–electrospray ionization mass spectrometry: Illustration using an assay method for the determination of famotidine in human plasma
575
Improved selectivity in the toluene alkylation reaction through understanding and optimising the process variables Original Research Article
576
Improved selectivity of oxide semiconductor type gas sensor using compensating element
577
Improved selectivity towards NO2 of phthalocyanine-based chemosensors by means of original indigo/nanocarbons hybrid material
578
Improved selectivity, response time and recovery time by [0 1 0] highly preferred-orientation silicalite-1 layer coated on SnO2 thin film sensor for selective ethylene gas detection
579
Improved self-alignment scheme for SINS using augmented measurement
580
Improved self-calibrated spiral parallel imaging using JSENSE
581
Improved semi-analytic sensitivity analysis combined with a higher order approximation scheme in the framework of adjoint variable method
582
Improved semi-empirical method for determination of heat transfer coefficient in flow boiling in conventional and small diameter tubes
583
Improved sensitivities in MW dispatch for control of voltage
584
Improved sensitivity analysis by a coupled FE–EFG method
585
Improved Sensitivity and Characterization of High-Speed Ion Chromatography of Inorganic Anions
586
Improved sensitivity and gradient-enhanced multiplicity edited two-dimensional heteronuclear shift correlation technique
587
Improved sensitivity for transition metal ions by use of sulfide in the Belousov–Zhabotinskii oscillating reaction Original Research Article
588
Improved sensitivity in detection of chlormequat by liquid chromatography–mass spectrometry
589
Improved sensitivity of sedimentary phospholipid analysis resulting from a novel extract cleanup strategy
590
Improved Sensitization of Antigen-Presenting Cells with Transferrin-Bound Peptides: Advantages in Competition for Antigen Presentation
591
Improved Sensor Selection Technique by Integrating Sensor Fusion in Robot Position Estimation
592
Improved sentence retrieval using local context and sentence length
593
Improved separation and characterization of lipopolysaccharide related compounds by reverse phase ion pairing-HPLC/electrospray ionization-quadrupole-mass spectrometry (RPIP-HPLC/ESI-Q-MS)
594
Improved separation and detection of picolinic acid and quinolinic acid by capillary electrophoresis-mass spectrometry: Application to analysis of human cerebrospinal fluid
595
Improved separation and quantification of neutral and polar lipid classes by HPLC–ELSD using a monolithic silica phase: Application to exceptional marine lipids
596
Improved separation efficiency in nanofiltration by using a membrane stack Original Research Article
597
Improved separation efficiency of neurotransmitters on a native printed capillary electrophoresis microchip simply by manipulating electroosmotic flow
598
Improved separation efficiency of photogenerated carriers for Fe2O3/SrTiO3 heterojunction semiconductor
599
Improved separation methods for the recovery of 82Sr from irradiated targets
600
Improved separation of biologically active substances on some composite sorbents
601
Improved separation of furocoumarins of essential oils by supercritical fluid chromatography
602
Improved separation of metallothionein isoforms by the presence of cyclodextrin in capillary zone electrophoresis
603
Improved Separation of Neolithic Metapodials of Sheep (Ovis) and Goats (Capra) from Arene Candide Cave, Liguria, Italy
604
Improved separation of sucrose ester isomers using gradient high performance liquid chromatography with evaporative light scattering detection
605
Improved separation of the 209 polychlorinated biphenyl congeners using comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry
606
Improved sequential linear programming formulation for structural weight minimization Original Research Article
607
Improved sequential procedures for estimating the percentile of a normal distribution
608
Improved sequentially linear solution procedure
609
Improved serodiagnosis of hydatid cyst disease using gold nanoparticle labeled antigen B in naturally infected sheep.
610
Improved Serological Response to Human Diploid Cell Rabies Vaccine When Given Simultaneously with Antirabies Hyperimmune Globulin
611
Improved serpentine laminating micromixer with enhanced local advection
612
Improved shape hardening function for bounding surface model for cohesive soils
613
Improved shape memory composites combined with TiNi wire and shape memory epoxy
614
Improved shape stability of nanosilica-filled PBT fibrils in PS matrix: Effects of accelerated crystallization and enhanced viscoelasticity
615
Improved shell finite element for piezothermoelastic analysis of smart fiber reinforced composite structures
616
Improved shoot regeneration protocol for canola explants and pre-assessment of salinity tolerance in canola transgenic plants
617
Improved shooting technique for numerical computations of eigenvalues in Sturm–Liouville problems Original Research Article
618
Improved short peptide identification using HILIC–MS/MS: Retention time prediction model based on the impact of amino acid position in the peptide sequence
619
Improved short-circuit photocurrent densities in dye-sensitized solar cells based on ordered arrays of titania nanotubule electrodes
620
Improved shoulder contour following forequarter amputation with an osteomyocutaneous free flap from the amputated extremity: two cases
621
Improved Shuffled Frog Leaping Algorithm and its multi-phase model for multi-depot vehicle routing problem
622
IMPROVED SIGNAL PROCESSING FOR SPLIT HOPKINSON BAR TESTS ON (QUASI-) BRITTLE MATERIALS
623
Improved Signal-to-Noise Ratio Estimation for Speech Enhancement
624
Improved sign-based learning algorithm derived by the composite nonlinear Jacobi process
625
Improved silver ion-selective electrodes using novel 1,3-bis(2-benzothiazolyl)thioalkoxy-p-tert-butylcalix[4]arenes
626
Improved silver/zinc secondary cells for underwater applications
627
Improved simulation method for the calculation of the intrinsic viscosity of some dendrimer molecules
628
Improved simulation of feedbacks between atmosphere and sea ice over the Arctic Ocean in a coupled regional climate model
629
Improved Simulation of Flow Regime Transition in Sewers: Two-Component Pressure Approach
630
Improved Simulation of Flows with Free-Surface Waves by Optimizing the Angle Factor in the HRIC Interface-Sharpening Scheme
631
Improved simulation of HVDC converter transformers in electromagnetic transient programs
632
Improved simulation of the ICRF waves in the VASIMR plasma Original Research Article
633
Improved simulation of water vapour and clear-sky radiation using 24-hour forecasts from ERA40
634
Improved simultaneous determination method of β-carotene and retinol with saponification in human serum and rat liver
635
Improved Simultaneous Localization and Mapping Estimation using Crow Search Algorithm Based Particle Filter
636
Improved single neuron controller for multivariable stochastic systems with non-Gaussianities and unmodeled dynamics
637
Improved single pass core design for high temperature Super LWR
638
Improved single-drop microextraction for high sensitive analysis
639
Improved single-phase line-interactive UPS
640
Improved single-video-object rate control for MPEG-4
641
Improved singular boundary method for elasticity problems
642
Improved sinterability and conductivity enhancement of 10-mol% calcium-doped ceria using different fuel-aided combustion reactions and its structural characterisation
643
Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment
644
Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment
645
Improved sinterability of SiC(w)/Si3N4 composites by whisker-oriented alignment
646
Improved size-tunable preparation of polymeric nanoparticles by microfluidic nanoprecipitation
647
Improved Skin Wound Healing Activity of Insulin Cream as Evidenced from the Morphological Evaluation in Guinea Pigs
648
Improved Skips for Faster Postings List Intersection
649
Improved slack-based context-dependent DEA – A study of international tourist hotels in Taiwan
650
Improved Slater approximation to SIC–OEP
651
Improved sliding mode control of a class of nonlinear systems: Application to quadruple tanks system
652
Improved Sliding Surface Search Method for Stability Analysis of Complex Slopes
653
Improved sliding wear-resistance of alumina with sub-micron grain size: A comparison with coarser grained material
654
Improved small-signal analysis for the phase-shifted PWM power converter
655
Improved smelting of ferrosilicon by means of SS-grade coal.
656
Improved Smoking Cessation in Smokers Given Ultrasound Photographs of Their Own Atherosclerotic Plaques
657
Improved smoothing spline regression by combining estimates of different smoothness
658
Improved smoothness and homogeneity of icosahedral grids using the spring dynamics method
659
Improved SNR in linear reordered 2D bSSFP imaging using variable flip angles
660
Improved SNR of MST RADAR Signals by Cosine Hyperbolic Window over Kaiser Window
661
Improved Sobolev inequalities and Muckenhoupt weights on stratified Lie groups
662
Improved Sobolev inequalities on groups of Iwasawa type in presence of symmetry
663
Improved Sobolev inequalities on the Heisenberg group Original Research Article
664
Improved Software Cost Estimation – A Robust and Interpretable Modelling Method and a Comprehensive Empirical Investigation
665
Improved software quality through improved development process descriptions
666
Improved soil hydraulic conductivity function based on specific liquid–vapour interfacial area around the soil particles
667
Improved soil moisture balance methodology for recharge estimation
668
Improved Soil Physical Properties, Yield and Water Productivity under Controlled Traffic, Raised-Bed Farming
669
Improved soil structure and citrus growth after inoculation with three arbuscular mycorrhizal fungi under drought stress
670
Improved solar efficiency by introducing graphene oxide in purple cabbage dye sensitized TiO2 based solar cell
671
Improved solarization of containerized medium for the control of Monosporascus collapse in melon
672
Improved solid fuels from co-pyrolysis of a high-sulphur content coal and different lignocellulosic wastes
673
Improved solidification influence modelling for Eulerian fuel–coolant interaction codes
674
Improved solid-phase extraction and HPLC measurement of torasemide and its important metabolites
675
Improved solid-phase extraction procedure for the isolation and in-sorbent pentafluorobenzyl alkylation of polyfunctional mercaptans: Optimized procedure and analytical applications
676
Improved solid-phase extraction/micellar procedure for the derivatization/preconcentration of benzaldehyde and methyl derivatives from water samples
677
Improved solid-phase peptide synthesis of ‘difficult peptides’ by altering the microenvironment of the developing sequence
678
Improved solid-phase synthesis and study of arylopeptoids with conformation-directing side chains
679
Improved solubilities of PAHs by multi-component Gemini surfactant systems with different spacer lengths
680
Improved solubility and stability of 7-hydroxy-4-methylcoumarin at different temperatures and pH values through complexation with sulfobutyl ether-β-cyclodextrin
681
Improved solubility and stability of trialkylammonium selenocarboxylate in organic solvents for efficient amidation with azides
682
Improved solubility of β-cyclodextrin inclusion complexes by using liquid ammonia as a solvent and the possibility of asymmetric reduction
683
Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization
684
Improved solubility, conductivity, thermal stability and corrosion protection properties of poly(o-toluidine) synthesized via chemical polymerization
685
Improved solubilization of pyromellitic dianhydride and 4,4′-oxydianiline in ionic liquid by the addition of zwitterion and their polycondensation
686
Improved solution stability and spinnability of concentrated polyaniline solutions using N,N′-dimethyl propylene urea as the spin bath solvent
687
Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part I. Characterisation of constituent particles and overheating
688
Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part II. Microstructure and mechanical properties
689
Improved solutions for the Chinese postman problem on mixed networks
690
Improved solutions for the traveling purchaser problem
691
Improved solutions to the Steiner triple covering problem
692
Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part I – Ionic liquids
693
Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part II – Molecular solvent properties
694
Improved solvation routes for the Bunsen reaction in the sulphur iodine thermochemical cycle: Part III–Bunsen reaction in molecular solvents
695
Improved solvent-free microwave extraction of essential oil from dried Cuminum cyminum L. and Zanthoxylum bungeanum Maxim.
696
Improved Sonogashira CC coupling through clay supported palladium complexes with tridentate pincer bis-carbene ligands
697
Improved sonographic visualization by fluid challenge method of renal lithiasis in the nondilated collecting system experience in seven cases
698
Improved sonolytic hydrolysis of peptides in aqueous solution with addition of 1,4-benzenedithiol
699
Improved sonolytic hydrolysis of peptides in aqueous solution with addition of 1,4-benzenedithiol
700
Improved sooting tendency measurements for aromatic hydrocarbons and their implications for naphthalene formation pathways
701
Improved space borne detection of volcanic ash for real-time monitoring using 3-Band method
702
Improved space–time forecasting of next day ozone concentrations in the eastern US
703
Improved spark and ember detection using stationary wavelet transforms
704
Improved spatial memory, neurobehavioral outcomes, and neuroprotective effect after progesterone administration in ovariectomized rats with traumatic brain injury: Role of RU486 progesterone receptor antagonist
705
Improved spatial modeling by merging multiple secondary data for intrinsic collocated cokriging
706
Improved spatial resolution by MOSFET dosimetry of an x-ray microbeam
707
Improved Specificity and False Discovery Rates for Multiplex Analysis of Changes in Strain-Specific Anti-Influenza IgG
708
Improved Specificity of Myoglobin Plus Carbonic Anhydrase Assay Versus That of Creatine Kinase-MB for Early Diagnosis of Acute Myocardial Infarction, , ,
709
Improved Specificity of Transesophageal Dobutamine Stress Echocardiography Compared to Standard Tests for Evaluation of Coronary Artery Disease in Women Presenting With Chest Pain
710
Improved spectral performance of random PWM schemes with weighted switching decision
711
Improved spectral quality for 3D MR spectroscopic imaging using a high spatial resolution acquisition strategy
712
Improved spectral relaxation methods for binary quadratic optimization problems
713
Improved spectrometric characteristics of thallium bromide nuclear radiation detectors
714
Improved spectrometric characteristics of thallium bromide nuclear radiation detectors
715
Improved spectrophotometric determination of paraquat in drinking waters exploiting a Multisyringe liquid core waveguide system
716
Improved spectroscopic constants for I2 D 1Σu+
717
Improved speech recognition using a subspace projection approach
718
Improved speed and stability of st-segment recovery with reduced-dose tenecteplase and eptifibatide compared with full-dose tenecteplase for acute st-segment elevation myocardial infarction Original Research Article
719
Improved speed estimation in sensorless PM brushless AC drives
720
Improved speed of hydrogen detection by Schottky diodes on InP with electrophoretically deposited Pt nanoparticles and graphite contacts
721
Improved SPH methods for simulating free surface flows of viscous fluids
722
Improved SPICE electrical model of silicon photomultipliers
723
Improved SPICE electrical model of silicon photomultipliers
724
Improved Spice models of aluminum electrolytic capacitors for inverter applications
725
Improved spinel-containing refractory castables for slagging gasifiers
726
Improved spiral disk assembly for high-speed counter-current chromatography
727
Improved spiral tube assembly for high-speed counter-current chromatography
728
Improved spread spectrum: a new modulation technique for robust watermarking
729
Improved sputter depth resolution in Auger thin film analysis using in situ low angle cross-sections
730
Improved square properties of IDEA
731
Improved SRAM Failure Diagnosis for Process Monitoring via Current Signature Analysis
732
Improved SRAM Failure Diagnosis for Process Monitoring via Current Signature Analysis
733
Improved stabilisation method for networked control systems
734
Improved Stabilities of Immobilized Glucoamylase on Functionalized Mesoporous Silica Synthesized using Decane as Swelling Agent
735
Improved stability analysis and gain-scheduled controller synthesis for parameter-dependent systems
736
Improved stability and altered selectivity of tyrosinase based graphite electrodes for detection of phenolic compounds Original Research Article
737
Improved stability and controlled release of ω3/ω6 polyunsaturated fatty acids by spring dextrin encapsulation
738
Improved stability and performance of aerobic granules under stepwise increased selection pressure
739
Improved stability criteria and controller design for linear neutral systems
740
Improved stability criteria for neutral type Lur’e systems with time-varying delays
741
Improved stability criteria for time-varying delayed T–S fuzzy systems via delay partitioning approach
742
Improved stability criteria for uncertain neutral-type Lur׳e systems with time-varying delays
743
Improved stability criterion and its applications in delayed controller design for discrete-time systems
744
Improved stability in N-alkylated organic semiconductors for thin film transistors: Synthesis and characterization of N,N′-dialkylated dihydrodiazapentacene derivatives
745
Improved stability of contact resistance of low melting point alloy incorporated isotropically conductive adhesives
746
Improved stability of halohydrin dehalogenase from Agrobacterium radiobacter AD1 by replacement of cysteine residues
747
Improved stability of La0.5Sr0.5FeO3 by Ta-doping for oxygen separation membrane application
748
Improved stability of liposome in oil/water emulsion by association of amphiphilic polymer with liposome and its effect on bioactive skin permeation
749
Improved stability of OLEDs with mild oxygen plasma treated PEDOT:PSS
750
Improved stability of organic field-effect transistor performance in oligothiophenes including β-isomers
751
Improved stability of quasi-solid-state dye-sensitized solar cell based on poly (ethylene oxide)–poly (vinylidene fluoride) polymer-blend electrolytes
752
Improved stability of solution processed photovoltaic devices using PQT-12
753
Improved stability of the carbon nanotubes–enzyme bioconjugates by biomimetic silicification
754
Improved stability of urease upon coupling to alkylamine and arylamine glass and its analytical use
755
Improved stability of volume resistivity in carbon black/ethylene-vinyl acetate copolymer composites by employing multi-walled carbon nanotubes as second filler
756
Improved stability quasi-solid-state dye-sensitized solar cell based on polyether framework gel electrolytes
757
Improved stabilization method for networked control systems with variable transmission delays and packet dropout
758
Improved stabilization of microencapsulated Cathepsin B in harsh conditions
759
Improved Stage Categorization of PTZ-Induced Kindling and Late Enhanced Neurogenesis in PTZ Kindled Mice
760
Improved staging of breast cancer through lymphatic mapping and sentinel node biopsy
761
Improved Stall Delay Model for HAWT Performance Predictions using 3D Navier-Stokes Solver and Actuator Disk Method
762
Improved starch recovery from potatoes by enzymes and reduced water holding of the residual fibres
763
Improved starting methods for two-step Runge–Kutta methods of stage-order image Original Research Article
764
Improved start-up scenario for single-stage electronic ballast
765
Improved state estimations of lower trophic ecosystems in the global ocean based on a Green’s function approach
766
Improved statistical inference for the two-parameter Birnbaum–Saunders distribution
767
Improved statistical inference for the two-parameter Birnbaum–Saunders distribution
768
Improved statistical methods applied to surface chemistry in minerals flotation
769
Improved statistical models for limited datasets in uncertainty quantification using stochastic collocation
770
Improved Statistically Optimal Nearfield Acoustical Holography in subsonically moving fluid medium
771
Improved steered response power method for sound source localization based on principal eigenvector
772
Improved Steffensen type bounds on expectations of record statistics
773
Improved stereospecific synthesis of the trans-isomers of dicyclohexano-18-crown-6 and the solid-state structure of the trans–syn–trans-isomer
774
Improved sternal closure using steel bands: Early experience with three-year follow-up
775
Improved sternal osteosynthesis using any sternal retractor
776
Improved stiffness distribution factors for evaluation of effective buckling lengths in multi-story sway frames
777
Improved stochastic competitive Hopfield network for polygonal approximation
778
Improved stochastic linearization method using mixed distributions
779
Improved stochastic optimization algorithms for adaptive optics Original Research Article
780
Improved stochastic resonance algorithm for enhancement of signal-to-noise ratio of high-performance liquid chromatographic signal Original Research Article
781
Improved Storage Stability of Pearl Millet Flour Through Microwave Treatment
782
Improved stoves in India: A study of sustainable business models
783
Improved stoves in Sub-Saharan Africa: the case of the Sudan
784
Improved strain sensing performance of glass fiber polymer composites with embedded pre-stretched polyvinyl alcohol–carbon nanotube fibers Original Research Article
785
Improved strategies for dynamic load balancing
786
Improved Strategy for a Constant Daily Light Integral in Greenhouses
787
Improved streamflow forecasting using self-organizing radial basis function artificial neural networks
788
Improved streamlines and time-of-flight for streamline simulation on irregular grids
789
Improved strength and ductility of magnesium alloy below micro-twin lamellar structure
790
Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive
791
Improved Strength and Stiffness Characteristics of Cross-laminated Poplar Timber Columns
792
Improved strength and toughness of polyketone composites using extremely small amount of polyamide 6 grafted graphene oxides
793
Improved Strength Model for Interior Flat Plate–Column Connections Subject to Unbalanced Moment
794
Improved strength of boron-doped Sn-1.0Ag-0.5Cu solder joints under aging conditions
795
Improved strength of early versus late supraspinatus tendon repair: a study in the rabbit
796
Improved strength of Ni and Zn-doped Sn–2.0Ag–0.5Cu lead-free solder alloys under controlled processing parameters
797
Improved strength-impairing contact damage resistance of Ti3Si(Al)C2/SiC composites
798
Improved stress intensity factors for a single corner crack at a loaded fastener hole
799
Improved stress intensity factors for selected configurations in cracked plates
800
Improved stresses for the 4-node tetrahedral element
801
Improved Structural Characterizations of the drkN SH3 Domain Unfolded State Suggest a Compact Ensemble with Native-like and Non-native Structure
802
Improved Structural Order, Stability, and Anion-Exchange Capacity of Cation-Mediated Bridged Hybrid Mesoscopic Materials by Using Chelating Ligands
803
Improved structural/morphological durability for organic solar cells based on poly(3-hexylthiophene) fibers photoactive layers
804
Improved Structure Design of a Single Phase Multilevel Inverter with ‎the Aim of Reducing Switching Devices ‎
805
Improved structure-adaptive anisotropic filter
806
Improved structure–property relationship models for prediction of critical properties
807
Improved Structures of Maximally Decimated Directional Filter Banks for Spatial Image Analysis
808
Improved Subcontractor Selection Employing Partnering Principles
809
Improved subgrid scale model for dense turbulent solid-liquid two-phase flows
810
Improved suboptimal Bang–Bang control of aseismic buildings with variable friction dampers
811
Improved Subspace-Based Single-Channel Speech Enhancement Using Generalized Super-Gaussian Priors
812
Improved substructuring method for eigensolutions of large-scale structures
813
Improved Sufficient Conditions for Monotonic PiecewiseRational Quartic Interpolation
814
Improved Suffix Tree Clustering for Efficient Document Clustering
815
Improved sulfur nutrition provides the basis for enhanced production of sulfur-containing defense compounds in Arabidopsis thaliana upon inoculation with Alternaria brassicicola
816
Improved superovulatory response in beef cattle following ovarian follicular ablation using a simplified transvaginal device
817
Improved superposition schemes for approximate multi-caloron configurations Original Research Article
818
Improved support concept for the Helias reactor coil system
819
Improved support vector classification using PCA and ICA feature space modification
820
Improved support vector clustering
821
Improved support vector clustering
822
Improved support vector machine regression in multi-step-ahead prediction for rock displacement surrounding a tunnel
823
Improved suppression of recurrent atrial fibrillation with dual-site right atrial pacing and antiarrhythmic drug therapy
824
Improved surface bounds based on derivatives
825
Improved surface morphology of flow-modulated MOVPE grown AIN on sapphire using thin medium-temperature AIN buffer layer
826
Improved surface photovoltaic response of nanoparticulate TiO2-pyridine derivative monolayer/n-Si(111) assembly
827
Improved surface properties of D2 steel by laser surface alloying
828
Improved surface property of PVDF membrane with amphiphilic zwitterionic copolymer as membrane additive
829
Improved surface proton conduction of yttrium-stabilized zirconia via acidic modifications
830
Improved surface roughness as a result of free-form surface machining using self-organized neural network
831
Improved surface sensing of DNA on gas-etched porous silicon
832
Improved surface stability and biotin binding properties of streptavidin coating on polystyrene
833
Improved surface treatment of the superconducting TESLA cavities
834
Improved surface treatment of the superconducting TESLA cavities
835
Improved surface-enhanced Raman scattering on electrochemically roughened silver substrates prepared in bielectrolyte solutions Original Research Article
836
Improved surface-enhanced Raman scattering on optimum electrochemically roughened silver substrates Original Research Article
837
Improved surgical field for composite arterial grafts
838
Improved surgical mesh integration into the rat abdominal wall with arginine administration
839
Improved Surgical Outcome for Chronic Severe Aortic Regurgitation With Severely Depressed Left Ventricular Systolic Function
840
Improved survivability analysis for SONET SHRs
841
Improved Survival After Cardiac Arrest Using Emergent Autopriming Percutaneous Cardiopulmonary Support
842
Improved survival after resection of colorectal liver metastases
843
Improved Survival and Decreasing Incidence of Adverse Events With the HeartMate II Left Ventricular Assist Device as Bridge-to-Transplant Therapy
844
Improved Survival and Hematopoietic Differentiation of Murine Embryonic Stem Cells on Electrospun Polycaprolactone Nanofiber
845
Improved survival and local control after total mesorectal excision or D3 lymphadenectomy in the treatment of primary rectal cancer: an international analysis of 1411 patients
846
Improved survival benefits with radiofrequency ablation for liver cancer
847
Improved survival following induction of GVHD following lipopolysaccharide immunization
848
Improved survival in cancer of the colon and rectum in Sweden
849
Improved Survival in Fontan-Associated Protein-Losing Enteropathy
850
Improved survival in patients with locally advanced prostate cancer treated with radiotherapy and goserelin, 337, M Bolla, D Gonzalez, P Warde, JB Dubois, RO Mirimanoff, G Storme, J Bernier, A Kuten, C Sternberg, T Gil, L Colette, M Pierart (Eds.), in: N
851
Improved survival in patients with nonischemic advanced heart failure and syncope treated with an implantable cardioverter-defibrillator
852
Improved survival in stage III non-small cell lung cancer: seven-year follow-up of cancer and leukemia group B (CALGB) 8433 trial: Dillman RO, Herndon J, Seagren SL. Eaton WL, Green MR J Natl Cancer Inst 1996;88:1210-5
853
Improved survival in young women with breast cancer
854
Improved survival of infants with omphalocele
855
Improved survival of Korean patients with idiopathic pulmonary arterial hypertension after the introduction of targeted therapies
856
Improved survival of patients with acute myocardial infarction with significant left ventricular dysfunction undergoing invasive coronary procedures
857
Improved Survival of Patients With End-Stage Heart Failure Listed for Heart Transplantation: Analysis of Organ Procurement and Transplantation Network/U.S. United Network of Organ Sharing Data, 1990 to 2005 Original Research Article
858
Improved survival rates support left ventricular assist device implantation early after myocardial infarction
859
Improved Survival With Multiple Left-Sided Bilateral Internal Thoracic Artery Grafts
860
Improved survival with plasma exchange in patients with thrombotic thrombocytopenic purpura-hemolytic uremic syndrome
861
Improved survival with plasma exchange in patients with thrombotic thrombocytopenic purpura-hemolytic uremic syndrome
862
Improved survival with preoperative chemotherapy followed by resection uncompromised by tumor response for advanced squamous cell carcinoma of the Head and Neck
863
Improved survival with preoperative radiotherapy in resectable rectal cancer: Swedish Rectal Cancer Trial N engl J Med 1997; 336: 980–987
864
Improved survival with VATS pleurectomy-decortication in advanced malignant mesothelioma
865
Improved symbiotic organisms search algorithm for solving unconstrained function optimization
866
Improved Symmetric Switched-Inductor/Capacitor Quasi Z-Source Inverter with Ability Uplifted-Boost
867
Improved symmetrical component-based fault distance estimation for digital distance protection
868
Improved syntheses and applicability of different DOTA building blocks for multiply derivatized scaffolds Original Research Article
869
Improved syntheses of [image] and [image]: Structural characterization of Na[Cp∗MoO3] · 5H2O and [image]
870
Improved syntheses of bis(ethynyl)-para-carboranes, 1,12-(RCtriple bond; length of mdashC)2-1,12-C2B10H10 and 1,10-(RCtriple bond; length of mdashC)2-1,10-C2B8H8 (R = H or Me3Si)
871
Improved syntheses of meso-tetraarylbenziporphyrins and observations of substituent effects on the diatropic characteristics of these formally nonaromatic carbaporphyrinoids
872
Improved syntheses of methyl (14E)- and (14Z)-dehydrocrepenynate: key intermediates in plant and fungal polyacetylene biosynthesis
873
Improved syntheses of poly(oxy-1,3-phenylenecarbonyl-1,4-phenylene) and related poly(ether–ketones) using polyphosphoric acid/P2O5 as polymerization medium
874
Improved syntheses of precursors for PET radioligands [18F]XTRA and [18F]AZAN
875
Improved syntheses of α-BOC-aminoketones from α-BOC-amino-Weinreb amides using a pre-deprotonation protocol
876
Improved synthesis and characterisation of a hydrazide derivative of diethylenetriaminepentaacetic acid for site-specific labelling of monoclonal antibodies with 111In
877
Improved synthesis and characterization of 1,3,4,6-tetra-O-acetyl-2-(N-acetylacetamido)-2-deoxy-β-d-glucopyranose
878
Improved synthesis and characterization of the copper Lyonsite-type compound Cu4−xMo3O12
879
Improved synthesis and crystal structure of tetrakis(acetonitrile)(η4-1,5-cyclooctadiene)ruthenium(II) bis[tetrafluoroborate(1−)]
880
Improved Synthesis and Crystal Structure of TiC1(3)(tmeda)(thf): A Highly Stereoselective Pinacol Coupling Reagent for Aromatic Aldehydes
881
Improved synthesis and evaluation of 17-substituted aminoalkylgeldanamycin derivatives applicable to drug delivery systems
882
Improved synthesis and hydrogen storage of a microporous metal–organic framework material
883
Improved synthesis and in vitro characterization of chitosan–thioethylamidine conjugate
884
Improved synthesis and in vitro/in vivo activities of natural product-inspired, artificial glutamate analogs Original Research Article
885
Improved synthesis and preparative scale resolution of racemic monastrol
886
Improved synthesis and radiolabeling of [11C]MP4A, a suitable ligand for the investigation of the cholinergic system using PET
887
Improved synthesis and X-ray crystal structure of pentafluorophenylcobalt tricarbonyl triphenylphosphine
888
Improved synthesis methods of standards used for quantitative determination of total isothiocyanates from broccoli in human urine
889
Improved synthesis of (2S,5S)-5-tert-butylproline
890
Improved synthesis of (4-ethenylphenyl)diphenyl methanol and its application in the preparation of trityl functionalized polystyrene resin containing tetrahydrofuran derived cross-linker
891
Improved synthesis of (9Z)-9,13-tetradecadien-11-ynal, the sex pheromone of the avocado seed moth, Stenoma catenifer
892
Improved synthesis of (R)-7-hydroxycarvone from (S)-α-pinene
893
Improved synthesis of (R)-glycine-d-15N
894
Improved synthesis of (S)-7-amino-5H,7H-dibenzo[b,d]azepin-6-one, a building block for γ-secretase inhibitors
895
Improved synthesis of 1,3-diolein by Novozym 435-mediated esterification of monoolein with oleic acid
896
Improved synthesis of 1,4-dideoxy-1,4-imino-d-galactitol, an inhibitor of E. coli K12 UDP-Gal mutase and mycobacterial galactan biosynthesis
897
Improved synthesis of 1,5-dinaphtho[38]crown-10
898
Improved synthesis of 2,2′-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by urea under ultrasound
899
Improved synthesis of 2,2′-arylmethylene bis(3-hydroxy-5,5-dimethyl-2-cyclohexene-1-one) derivatives catalyzed by urea under ultrasound
900
Improved synthesis of 2,2′-dimethoxy-1,1′-binaphthyl-3,3′-diacetic acid derivatives
901
Improved synthesis of 2,3:4,6-di-O-isopropylidene-d-glucopyranose and -d-galactopyranose
902
Improved synthesis of 2′-amino-2′-deoxyguanosine and its phosphoramidite Original Research Article
903
Improved synthesis of 3-(dialkylaminomethyl)-indole in acetic acid aqueous solution under ultrasound irradiation
904
Improved synthesis of 3-(dialkylaminomethyl)-indole in acetic acid aqueous solution under ultrasound irradiation
905
Improved synthesis of 3-aryl isoxazoles containing fused aromatic rings
906
Improved synthesis of 3-methoxy-4-hydroxymandelic acid by glyoxalic acid method
907
Improved synthesis of 4,4′-diamino-2,2′-bipyridine from 4,4′-dinitro-2,2′-bipyridine-N,N′-dioxide
908
Improved synthesis of 4-amino-7-nitrobenz-2,1,3-oxadiazoles using NBD fluoride (NBD-F)
909
Improved synthesis of 4-phenylphenalenones: the case of isoanigorufone and structural analogs
910
Improved synthesis of 6-amino-6-deoxy-d-galactono-1,6-lactam and d-mannono-1,6-lactam from corresponding unprotected d-hexono-1,4-lactones
911
Improved synthesis of 9-(2,3-dideoxy-2-fluoro-β-d-threo-pentofuranosyl)adenine (FddA) using triethylamine trihydrofluoride
912
Improved synthesis of a [4.4]-spirolactam β-turn mimetic as surrogate of the didemnin side chain dipeptide Pro-N-Me-d-Leu
913
Improved synthesis of a C3-symmetrical pyridinophane
914
Improved synthesis of a fluorogenic ceramidase substrate Original Research Article
915
Improved synthesis of an aldobiouronic acid related to hardwood xylans, and preparation of a derivative thereof suitable for linking to proteins
916
Improved synthesis of anti-[18F]FACBC: improved preparation of labeling precursor and automated radiosynthesis
917
Improved synthesis of antibacterial 3-substituted 6-anilinouracils
918
Improved synthesis of C8–C20 segment of pectenotoxin-2
919
Improved synthesis of carbon nanotubes with junctions and of single-walled carbon nanotubes
920
Improved synthesis of cellulose carbamates without by-products
921
Improved synthesis of chalcones under ultrasound irradiation
922
Improved synthesis of chalcones under ultrasound irradiation
923
Improved synthesis of chalconoid-like compounds under ultrasound irradiation
924
Improved synthesis of chalconoid-like compounds under ultrasound irradiation
925
Improved synthesis of d,l-fluorocitric acid
926
Improved synthesis of d-allothreonine derivatives from l-threonine
927
Improved synthesis of daunomycin conjugates with triplex-forming oligonucleotides. The polypurine tract of HIV-1 as a target Original Research Article
928
Improved synthesis of DCDHF fluorophores with maleimide functional groups
929
Improved synthesis of di- and trinuclear iron carbonyl complexes containing bridging diphenylethenyl ligand.: X-ray structure of [PPh4][Fe2(CO)6(μ-CO)(μ-PhCCHPh)]
930
Improved synthesis of dicyclohexylidene protected quebrachitol and its use in the synthesis of l-chiro-inositol derivatives
931
Improved synthesis of diethyl 2,6-dimethyl-4-aryl-4H-pyran-3,5-dicarboxylate under ultrasound irradiation
932
Improved synthesis of diethyl 2,6-dimethyl-4-aryl-4H-pyran-3,5-dicarboxylate under ultrasound irradiation
933
Improved synthesis of diethyl ferrocenylphosphonate, crystal structure of (FcPO3Et2)2 · ZnCl2, and electrochemistry of ferrocenylphosphonates, FcP(O)(OR)2, FcCH2P(O)(OR)2, 1,1′-fc[P(O)(OR)2]2 and [FcP(O)(OEt)2]2 · ZnCl2 (Fc = (η5C5H5)Fe(η5C5H4), fc = (η5C
934
Improved synthesis of disaccharides with Escherichia coli β-galactosidase using bio-solvents derived from glycerol
935
Improved synthesis of fullerynes by Fisher esterification for modular and efficient construction of fullerene polymers with high fullerene functionality
936
Improved synthesis of functionalized 5,6-dihydro-pyrimido[4,5-b][1,4]oxazepines
937
Improved synthesis of functionalized mesogenic 2,6-bisbenzimidazolylpyridine ligands
938
Improved synthesis of functionalized molecular platforms related to marine cyclopeptides
939
Improved synthesis of glycosylamines and a straightforward preparation of N-acylglycosylamines as carbohydrate-based detergents
940
Improved synthesis of histone deacetylase inhibitors (HDIs) (MS-275 and CI-994) and inhibitory effects of HDIs alone or in combination with RAMBAs or retinoids on growth of human LNCaP prostate cancer cells and tumor xenografts Original Research Article
941
Improved synthesis of HN(SPPh2)(SePPh2) and some coordination chemistry of [N(SPPh2)(SePPh2)]−
942
Improved synthesis of monodentate and bidentate 2- and 3-pyridylphosphines
943
Improved synthesis of monohydroxytriphenylenes (MHTs)—important precursors to discotic liquid crystal families
944
Improved synthesis of N1-substituted orotic acid derivatives
945
Improved synthesis of N-alkyl substituted dithieno[3,2-b:2′,3′-d]pyrroles
946
Improved synthesis of no-carrier-added p-[124I]iodo-l-phenylalanine and p-[131I]iodo-l-phenylalanine for nuclear medicine applications in malignant gliomas
947
Improved synthesis of oligonucleoside methylphosphonate analogs
948
Improved synthesis of oligonucleotides containing 2-thiouridine derivatives by use of diluted iodine solution
949
Improved synthesis of perfluorooctylpropyl amine
950
Improved synthesis of per-O-acetylated C1 hydroxyglycopyranose and structural study as non-covalent organic framework
951
Improved synthesis of phenylethylamine derivatives by Negishi cross-coupling reactions
952
Improved synthesis of pincer ligand precursor, and synthesis and structural characterization of terphenyl scaffolded S–C–S palladium pincer complex
953
Improved Synthesis of Prostanoids on a Non-Cross-Linked Polystyrene Soluble Support
954
Improved synthesis of pure [18F]fluoro-compounds for PET studies from bromo-compounds
955
Improved synthesis of pyridyl–biaryl ring systems via benzidine rearrangements
956
Improved synthesis of pyrylium salts leading to 2,4-disubstituted diarylfurans via novel mechanism
957
Improved Synthesis of Quinacridine Derivatives
958
Improved synthesis of quinine alkaloids with the Teoc protective group
959
Improved synthesis of substituted pyrido[2,3-d]pyrimidinediones
960
Improved synthesis of sucrose fatty acid monoesters under ultrasonic irradiation
961
Improved synthesis of sucrose fatty acid monoesters under ultrasonic irradiation
962
Improved synthesis of the bifunctional chelating agent 1,4,7,10-tetraaza-N-(1-carboxy-3-(4-nitrophenyl)propyl)-N′,N″,N‴-tris(acetic acid)cyclododecane (PA-DOTA) Original Research Article
963
Improved synthesis of the heteronuclear phosphido Mo–W complex CO4Moμ-PMe22WCO4 and its use as MOCVD precursor
964
Improved synthesis of the hypoxia probe 5-deutero-5-fluoro-5-deoxy-azomycin arabinoside (FAZA) as a model process for tritium radiolabeling
965
Improved synthesis of the iodine-free thyromimetic GC-1
966
Improved synthesis of the peripheral benzodiazepine receptor ligand [11C]DPA-713 using [11C]methyl triflate
967
Improved synthesis of the polyhydroxylated central part of phoslactomycin B
968
Improved synthesis of the radical source bis[2,2,6,6-tetramethylpiperidyl-(1)]-disulfide and photoinduced reactions with M2(CO)10 (M=Mn, Re)
969
Improved Synthesis of Three Brominated Analogues of the Potent Environmental Mutagen 3-Chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX)
970
Improved synthesis of trans-4-alkylcyclohexane carboxylic acids
971
Improved synthesis of UDP-2-(2-ketopropyl)galactose and a first synthesis of UDP-2-(2-ketopropyl)glucose for the site-specific linking of biomolecules via modified glycan residues using glycosyltransferases
972
Improved Synthesis of Vasicinone
973
Improved synthesis of V-PYRRO/NO, a liver-selective nitric oxide prodrug, and analogues
974
Improved synthesis, characterization and catalytic application of [H(OEt2)2][B{C6H3(m-CF3)2}4]
975
Improved synthesis, characterization and catalytic application of [H(OEt2)2][B{C6H3(m-CF3)2}4]
976
Improved Synthetic Approaches Toward 2′-O-Methyl-Adenosine and Guanosine and Their N-Acyl Derivatives
977
Improved synthetic method for preparing spiro α-chloroepoxides
978
Improved synthetic pathway for the derivatization of huprine scaffold
979
Improved synthetic routes to rhodium bipyridine complexes: Comparison of microwave vs. conventional synthesis
980
Improved system AGC performance with arc furnace steel mill loads
981
Improved system buckling analysis of effective lengths of girder and tower members in steel cable-stayed bridges
982
Improved System for Constructing Bacterial cDNA Libraries From the Venom Glands of Two Iranian Scorpions
983
improved system for constructing bacterial cdna libraries from the venom glands of two iranian scorpions
984
Improved system identification with Renormalization Group
985
Improved systolic function after PTCA can be estimated by femoral arterial Doppler
986
Improved T1-weighted dynamic contrast-enhanced MRI to probe microvascularity and heterogeneity of human glioma
987
Improved T2* assessment in liver iron overload by magnetic resonance imaging
988
Improved Tabu search heuristics for the dynamic space allocation problem
989
Improved Taguchi method based contract capacity optimization for industrial consumer with self-owned generating units
990
Improved Takagi–Sugeno fuzzy model-based control of flexible joint robot via Hybrid-Taguchi genetic algorithm
991
Improved Takagi–Sugeno fuzzy model-based control of flexible joint robot via Hybrid-Taguchi genetic algorithm
992
Improved target system for production of high purity [18F]fluorine via the 18O(p,n)18F reaction
993
Improved targeting of 5-[125I/131I]iodo-2′-deoxyuridine to rat hepatoma by using lipiodol emulsion
994
Improved targeting of 5-[125I/131I]iodo-2′-deoxyuridine to rat hepatoma by using lipiodol emulsion
995
Improved Teaching Learning Based Optimization (ITLBO) Algorithm For Solving Optimal Reactive Power Dispatch Problem
996
Improved teaching learning based optimization for global function optimization
997
Improved teaching–learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems
998
Improved technical characteristics of the MI-8/17 in the army of FYR Macedonia
999
Improved technique for immunoelectron microscopy. How to prepare epoxy resin to obtain approximately the same immunogold labeling for epoxy sections as for acrylic sections without any etching
1000
Improved technique for isolating RNA from tobacco tissues
بازگشت