<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Innovative beneficial reuse of reverse osmosis concentrate using bipolar membrane electrodialysis and electrochlorination processes
2
Innovative biofiltration materials for H2S removal from biogas
3
Innovative biomass to power conversion systems based on cascaded supercritical CO2 Brayton cycles
4
Innovative biorefinery concept for sugar-based ethanol industries: Production of protein-rich fungal biomass on vinasse as an aquaculture feed ingredient
5
Innovative Blended Learning Model in State Vocational School 3 Lubuklinggau
6
Innovative capability and export performance of Chinese firms
7
Innovative catalyst supports to address fuel cell stack durability
8
Innovative channels for digital images delivery: multimedia messaging service technology enhancing picture messaging for mobile and Internet environments
9
Innovative chemically bonded ionic liquids-based sol–gel coatings as highly porous, stable and selective stationary phases for solid phase microextraction Original Research Article
10
Innovative Chitosan-Based Coating for Enhance Preservation and Sensory Quality of Rainbow Trout (Oncorhynchus mykiss) Fillets Using Microencapsulated Milk Thistle (Silybum marianum) Extract
11
Innovative cleaner production for steel phosphorization using Zn–Mn phosphating solution
12
Innovative CO2 pretreatment for enhancing biohydrogen production from the organic fraction of municipal solid waste (OFMSW)
13
Innovative colorimetric sensors for the detection of nitrogen trichloride at ppb level in swimming pools
14
Innovative combination of electrolysis and Fe(II)-activated persulfate oxidation for improving the dewaterability of waste activated sludge
15
Innovative combined heat and power system based on a double shaft intercooled externally fired gas cycle
16
Innovative companiesʹ external information search in Russia
17
Innovative computing and detailed properties of elementary reactions using time independent approaches Original Research Article
18
Innovative concept for gasification for hydrogen based on the heat integration between water gas shift unit and coal–water–slurry gasification unit
19
Innovative concepts for hydrogen production processes based on coal gasification with capture
20
Innovative concepts for the coproduction of electricity and syngas with solid oxide fuel cells
21
Innovative connection in wooden trusses
22
Innovative Construction of SrTiO3 Nanoparticle/ZnO Nanorod Heterojunction Photocatalyst for Hydrogen Production Under Simulated Sunlight Radiation
23
Innovative Cotton Harvesting Bags
24
Innovative coupled fluid–structure interaction model for carbon nano-tubes conveying fluid by considering the size effects of nano-flow and nano-structure
25
Innovative crystal transformation of dihydrate trehalose to anhydrous trehalose using ethanol Original Research Article
26
Innovative CSR: from Risk Management to Value Creation
27
Innovative culture shock prescribed for health care
28
Innovative curriculum for second-year Harvard-MIT medical students: practicing communication skills with volunteer patients giving immediate feedback
29
Innovative Delivery of Newborn Anticipatory Guidance: A Randomized, Controlled Trial Incorporating Media-Based Learning Into Primary Care
30
Innovative demodulation method for SSB technique
31
Innovative deposit products in Woori Bank
32
Innovative design for optical porous silicon gas sensor
33
Innovative design of a hybrid tool for turning assisted with superficial cold forming
34
Innovative design of a magnetocaloric system
35
Innovative design of an hydrogen powertrain via reverse engineering
36
Innovative design of cassegrain solar concentrator system for indoor illumination utilizing chromatic aberration to filter out ultraviolet and infrared in sunlight
37
Innovative design of non-convective zone of salt gradient solar pond for optimum thermal performance and stability
38
Innovative design of the lifting mechanisms for forklift trucks
39
Innovative design to improve the power density of a solid oxide fuel cell
40
Innovative development and validation of an HPLC/DAD method for the qualitative and quantitative determination of major cannabinoids in cannabis plant material
41
Innovative Development of Railway Corporations in Asian Region:Estimating the Impact of Environment Using Comparative Analysis ofKorean and Chinese Companies
42
Innovative Devices and Futuristic Therapies
43
Innovative devices for hydrogen removal
44
Innovative devices for hydrogen removal Original Research Article
45
Innovative Diagnostic Tool: Convolutional Neural Network for Early Fat Malabsorption Detection in Pediatric Patients with Chronic Diarrhea
46
Innovative Drying Tool (Oven) with the Hot Air Flow Method to Improve Productivity and Quality of Sugar for Small Medium Enterprise in Indonesia
47
Innovative Dust Control Filtration Plant Design to Meet Emission Standards
48
Innovative East Asia: The Future of Growth: Shahid Yusuf (with Altaf, Eichengreen, Gooptu, Nabeshima, Kenny, Perkins, and Shotten), World Bank and Oxford University Press, Washington, DC and New York, 2003Economic and Financial Crises in Emerging Market E
49
Innovative efficiency and stock returns
50
Innovative Efficient Element for Analysis of FGM Plates Using FEM
51
Innovative Electrode Designs for Electrohydrodynamic Conduction Pumping
52
Innovative electrodes for direct methanol fuel cells based on carbon nanofibers and bimetallic PtAu nanocatalysts
53
Innovative elements and expected effectiveness of the 1991 eia convention
54
Innovative endoscopic mapping technique of barrett’s mucosa
55
Innovative energy reconstruction algorithm for a hadron calorimeter
56
Innovative energy reconstruction algorithm for a hadron calorimeter
57
Innovative energy strategies for CO2 stabilization: edited by Robert G. Watts, hardbound. Cambridge University Press (UK) 2002, ISBN 0 521 80725 5
58
Innovative energy technologies and climate policy in Germany
59
Innovative Equine Facilitated Psychotherapy Intervention for Adolescent Addiction Treatment: A Pilot Study
60
Innovative evaluation of local injective gel of curcumin on the orthodontic tooth movement in rats
61
Innovative externally bonded FRP/concrete hybrid flexural members
62
Innovative fabrication of Ceo2 nanoparticles/WO3 nanoplates S-Scheme heterojunction for visible light photocatalytic degradation of nitenpyram insecticide
63
Innovative fabrication of PZT pillar arrays by a colloidal approach
64
Innovative fast breeder reactor concept ‘RAPID’ for improvement of reactor performance and proliferation resistance Original Research Article
65
Innovative finance for women and children
66
Innovative financing for human development
67
Innovative fluorescence spectroscopic techniques for rapidly characterising oil inclusions
68
Innovative Food and Its Effects toward Consumers’ Purchase Intention of Fast Food Product
69
Innovative food processing technology using ohmic heating and aseptic packaging for meat
70
Innovative forms of organising in Europe and Japan
71
Innovative Functions of Metabolomics in Individualized Health Care: A Review Study in the Field of Metabolomics VitminD Treatment Change MTH1 and MYH Genes Expression in HUVEK Cell
72
Innovative gap-filling strategy for annual sums of CO2 net ecosystem exchange
73
Innovative gas diffusion layers and their water removal characteristics in PEM fuel cell cathode
74
Innovative gasketless carbon composite bipolar plates for PEM fuel cells
75
Innovative genetic algorithms for chemoinformatics
76
Innovative green nanocomposites based on silicate clays/lignin/natural fibres
77
Innovative green supercritical fluid chromatography development for the determination of polar compounds
78
Innovative heat pipe systems using a new working fluid
79
Innovative high-performance liquid chromatography method development for the screening of 19 antimalarial drugs based on a generic approach, using design of experiments, independent component analysis and design space
80
Innovative high-performance process for dry manufacturing of sheet metal armatures and their integrated on-line cleanliness examination
81
Innovative high-pressure laminate insulation for fusion magnets
82
Innovative HSR process to transform waste incinerator slag into useful mineral additives
83
Innovative Hybrid Backward Input Estimation and Data Fusion for High Maneuvering Target Tracking
84
Innovative hydrometallurgical processing technique for industrial zinc and manganese process residues
85
Innovative hydrometallurgical processing technique for industrial zinc and manganese process residues
86
Innovative ICT-Based Services: Drivers of Transition to Cash-less Society and Competitive Advantage in the Nigerian Banking Industry
87
Innovative ideas for future research on magnetocaloric technologies
88
Innovative image processing techniques applied to the thermographic inspection of PFC with SATIR facility
89
Innovative Infrastructure Pipeline Construction Technology: Pipe Jacking System
90
Innovative insertion material of LiAl1/4Ni3/4O2 (R-m) for lithium-ion (shuttlecock) batteries
91
Innovative Instruments and Legal Mechanisms of Bank Capitalization: National Features and World Trends
92
Innovative Instruments and Legal Mechanisms of Bank Capitalization: National Features and World Trends
93
Innovative integrated process for the treatment of azo dyes: coupling of photocatalysis and biological treatment Original Research Article
94
Innovative interlocked soil–cement block for the construction of masonry to eliminate the settling mortar
95
Innovative Internet services and bio-inspired technologies in information management
96
Innovative introduction to surgery in the preclinical years
97
Innovative isothermal oil-free co-rotating scroll compressor–expander for energy storage with first expander tests
98
Innovative IT climates: CIO perspectives
99
Innovative land use and public transport policy : The case of Curitiba, Brazil
100
Innovative laser heating methodology study for crack growth retardation in aircraft structures
101
INNOVATIVE LIGHTED STYLET (Succeeds Where Conventional Lighted Stylet Fails)
102
Innovative low temperature SOFCs and advanced materials
103
Innovative low-cost power module
104
Innovative low-cost recycled rubber–fiber reinforced isolator: Experimental tests and Finite Element Analyses
105
Innovative Machine Kinematics for Combined Handling and Machining of Three-Dimensional Curved Lightweight Extrusion Structures
106
INNOVATIVE MANAGEMENT METHODS OF COMMERCIAL BANKS ARE THE KEY TO DEVELOPMENT
107
Innovative management practices and their impact on local e-government performance: The Turkish provincial municipalities
108
Innovative manufacturing technique for glass matrix composites: extrusion of recycled TV set screen glass reinforced with Al2O3 platelets
109
Innovative manufacturing technologies for the disassembly of consumer goods
110
Innovative Mars entry integrated navigation using modified multiple model adaptive estimation
111
Innovative materials for Gen IV systems and transmutation facilities: The cross-cutting research project GETMAT
112
Innovative Mathematical Model for Earthquake Prediction
113
Innovative means for the catalytic regeneration of particulate traps for diesel exhaust cleaning
114
Innovative membrane filtration system for micropollutant removal from drinking water – prospective environmental LCA and its integration in business decisions
115
Innovative membrane reformer for hydrogen production applied to PEM micro-cogeneration: Simulation model and thermodynamic analysis
116
Innovative metal oxide-based substrates for DNA microarrays
117
Innovative method for assessment of underground sewer pipe condition
118
Innovative method for carbon dioxide determination in human postmortem cardiac gas samples using headspace-gas chromatography–mass spectrometry and stable labeled isotope as internal standard Original Research Article
119
Innovative method for determination of 19 polycyclic aromatic hydrocarbons in food and oil samples using gas chromatography coupled to tandem mass spectrometry based on an isotope dilution approach
120
Innovative method for determining glycogen content in the Pacific oyster (Crassostrea gigas) by ion chromatography
121
Innovative method for electrospinning of continuous TiO2 nanofiber yarns: Importance of auxiliary polymer and solvent selection
122
Innovative method for preparing a frozen, battered food without a prefrying step
123
Innovative method of pulverisation coating of prestabilized nanopowders for mass production of gas sensors
124
Innovative methodology for the synthesis of Ba-M hexaferrite BaFe12O19 nanoparticles
125
Innovative Methodology to Improve the Quality of Electronic Engineering Formation Through Teaching Industrial Computer Engineering
126
Innovative methods for determining alkenone unsaturation indices
127
Innovative methods for preparation and testing of Al2O3 supported silicalite-1 membranes
128
INNOVATIVE METHODS FOR SLUDGE CHARACTERIZATION IN BIOLOGICAL PHOSPHORUS REMOVAL SYSTEMS
129
INNOVATIVE METHODS FOR SLUDGE CHARACTERIZATION IN BIOLOGICAL PHOSPHORUS REMOVAL SYSTEMS
130
Innovative methods for the amelioration of aflatoxin (afb1) effect in broiler chicks
131
Innovative Methods for the Investigation of Tool-Chip Adhesion and Layer Formation during Machining
132
Innovative methods in tourism research
133
Innovative microbial fuel cell for electricity production from anaerobic reactors
134
Innovative microRNA purification based on surface properties modulation
135
Innovative microwave-assisted hydrolysis of ellagitannins and quantification as ellagic acid equivalents
136
Innovative microwave-assisted oximation and silylation procedures for metabolomic analysis of plasma samples using gas chromatography–mass spectrometry
137
Innovative mimetic discretizations for electromagnetic problems
138
Innovative mini‑hydro device for the recharge of electric vehicles in urban areas
139
Innovative modelling approach for the work piece whirling motion in the lathe machine
140
Innovative modelling approach for the work piece whirling motion in the lathe machine
141
Innovative modelling approaches for disaster risk reduction
142
Innovative models for rural child protection teams
143
Innovative Models of Indonesian Teaching and Learning at Elementary School
144
Innovative Monolateral Approach for Closed-Chest Atrial Fibrillation Surgery
145
Innovative multifunctional siloxane treatment of jute fiber surface and its effect on the mechanical properties of jute/thermoset composites
146
Innovative multi-functional treatments of ligno-cellulosic jute fabric
147
Innovative nanoporous materials: metal-aluminophosphates
148
Innovative nanosize lithium storage alloys with silica as active centre
149
Innovative nanotechnologies for the delivery of oligonucleotides and siRNA
150
Innovative networks in manufacturing: some empirical evidence from the metropolitan area of Barcelona
151
Innovative nitride passivated pseudomorphicGaAs HEMTs
152
Innovative Non-Invasive Techniques in Skin Pharmaceutics as Valid Complements in Cosmetic Dermatology Practice
153
Innovative observing strategy and orbit determination for Low Earth Orbit space debris
154
Innovative old-age security models for developing nations: Chile and Brazil
155
Innovative olive-growing models: an environmental and economic assessment
156
Innovative Online Faculty Development Utilizing the Power of Social Media
157
Innovative operations management applications in not-for-profit, public and government services
158
Innovative output, and a firmʹs propensity to patent.: An exploration of CIS micro data
159
Innovative partnerships to advance public health training in community-based academic residency programs
160
Innovative PCDD/F-containing gas stream generating system applied in catalytic decomposition of gaseous dioxins over V2O5–WO3/TiO2-based catalysts Original Research Article
161
Innovative performance evaluation methodologies and tools: Selected papers from ValueTools 2006
162
Innovative PET detector concept based on SiPMs and continuous crystals
163
Innovative PET detector concept based on SiPMs and continuous crystals
164
Innovative plasticized starch films modified with waterborne polyurethane from renewable resources
165
Innovative polymer processing in carbon dioxide
166
Innovative porous SiC-based materials: From nanoscopic understandings to tunable carriers serving catalytic needs Original Research Article
167
Innovative preparation of MoS2–graphene heterostructures based on alginate containing (NH4)2MoS4 and their photocatalytic activity for H2 generation
168
Innovative pretreatment of sugarcane bagasse using supercritical CO2 followed by alkaline hydrogen peroxide
169
Innovative private micro-hydro power development in Rwanda
170
Innovative problem solving in birds: a key role of motor diversit
171
Innovative problem solving in wild meerkats
172
Innovative procedure for measurement of losses of transformers supplying nonsinusoidal loads
173
Innovative procedure for the determination of gross-alpha/gross-beta activities in drinking water
174
Innovative procedures and new technologies
175
Innovative process for biogas upgrading with CO2 storage: Results from pilot plant operation
176
Innovative process for submicronic Cu particle deposition onto various substrates
177
Innovative process scheme for removal of organic matter, phosphorus and nitrogen from pig manure
178
Innovative process to characterize buried utilities using Ground Penetrating Radar
179
Innovative Processes and Tools for Disassembly
180
Innovative processes to desulfate the Paradox Valley brine Original Research Article
181
Innovative processing of dense LSGM electrolytes for IT-SOFCʹs
182
Innovative processing of high-strength and low-cost ferritic steels strengthened by Y–Ti–O nanoclusters
183
Innovative production treatment hydroponic farm for primary municipal sewage utilisation
184
Innovative prototype of a zinc-oxide based optical gas sensor
185
Innovative q-rung orthopair fuzzy prioritized interactive aggregation operators to evaluate efficient autonomous vehicles for freight transportation
186
Innovative q-rung orthopair fuzzy prioritized interactive aggregation operators to evaluate efficient autonomous vehicles for freight transportation
187
Innovative radiation-based direct heat exchanger (DHX) for liquid metal cooled reactors
188
Innovative real-time and non-destructive method of beam profile measurement under large beam current irradiation for BNCT
189
Innovative real-time and non-destructive method of beam profile measurement under large beam current irradiation for BNCT
190
Innovative rear-foot linked-body model applied to the analysis of normal gait at different speeds
191
Innovative Redesign and Reorganization of Library Technical Services: Paths for the Future and Case Studies
192
Innovative regions and industrial clusters in hydrogen and fuel cell technology
193
Innovative regulatory and policy initiatives at increasing ICT connectivity in South Africa
194
Innovative reliability allocation using the maximal entropy ordered weighted averaging method
195
Innovative remedial strategies for inverter faults in IPM synchronous motor drives
196
Innovative renewable energy education using the World Wide Web
197
Innovative research in OR/MS?
198
Innovative retail merchandising strategies to accommodate for the growing trend of heavier carcass weights in the United States
199
Innovative scanning experiences from an idea generation project at Volvo Cars
200
Innovative school principals and restructuring. Life history portraits of successful managers of change : C. Dimmock and T. A. OʹDonoghue. Routledge, London and New York, 1997. ISBN 0 415 13899 X, 182 pp., £12.99 (paper)
201
Innovative science and technology commercialization strategies at 3M: a case study
202
Innovative seismic design optimization with reliability constraints
203
Innovative self-cleaning and bactericide textiles
204
Innovative sharing: Shared accounting information as a facilitator of trust and performance
205
Innovative sheet metal forming processes: numerical simulations and experimental tests
206
Innovative Single-Stage Repair of Severe Asymmetric Pectus Excavatum Defects
207
Innovative sludge handling through pelletization/thickening
208
Innovative software platform for eco-design of efficient electric motors
209
Innovative solar augmentation of gas turbine combined cycle plants
210
Innovative solar windows for cooling-demand climate
211
Innovative sol–gel coatings for solid-phase microextraction: Development of fibers for the determination of polycyclic aromatic hydrocarbons at trace level in water
212
Innovative solid carbonate¯ceria composite electrolyte fuel cells
213
INNOVATIVE SOLUTIONS FOR EFFECTIVE CONFLICT RESOLUTION IN HIGHER EDUCATION INSTITUTIONS
214
Innovative solvo-combustion route for the rapid synthesis of MoO3 and Sm2O3 materials
215
Innovative specialization trends in innovation activities in Turkey: Istanbul, Ankara and Izmir territories manufacturing industry patent indicators
216
Innovative spectral investigations on the thermal-induced poly(aspartic acid)
217
INNOVATIVE SPEECH RECONSTRUCT/VE SURGERY
218
Innovative steam generation system for the secondary loop of “ALFRED” lead-cooled fast reactor demonstrator
219
Innovative steel strip coatings by means of PVD in a continuous pilot line: process technology and coating development
220
Innovative strategies for co-delivering antigens and CpG oligonucleotides
221
Innovative Strategies for Feeding and Nutrition in Infants with Congenitally Malformed Hearts
222
Innovative Strategies for Learning and Teaching of Large Differential Equations Classes
223
Innovative strategies for operation of mist trickling reactors for enhanced hairy root proliferation and secondary metabolite productivity
224
Innovative structured VOx/TiO2 photocatalysts supported on phosphors for the selective photocatalytic oxidation of ethanol to acetaldehyde
225
Innovative Study of EPQ Model with Time Induced Demand under Decline Release
226
Innovative study of non-steady-state tritiated water diffusion test
227
Innovative supercritical CO2 extraction of lycopene from tomato in the presence of vegetable oil as co-solvent
228
Innovative surface modification of Ti–6Al–4V alloy with a positive effect on osteoblast proliferation and fatigue performance
229
Innovative swine nutrition: some present and potential applications of latest scientific findings for safe pork production
230
Innovative synthesis of TiO2 nanorod/WO3 nanoflakes heterojunction photocatalyst for visible light degradation of Nitenpyram insecticide
231
Innovative synthetical and structural features of new aryltellurenyl iodides
232
Innovative system designs for DMFC
233
Innovative system for monitoring contamination in lubricating and hydraulic oils
234
Innovative system for monitoring contamination in lubricating and hydraulic oils
235
Innovative teaching method for complying with OSHAʹs bloodborne pathogen and tuberculosis exposure control plans
236
Innovative Team-Learning Project for Undergraduate Pathology Education
237
Innovative technical solutions for evaporation of multilayer coatings by EB-PVD method
238
Innovative Technique for Character Recognition
239
Innovative Technique for Posterior Fixation of Vertically Unstable Pelvic Ring Fracture: A Case Report
240
Innovative Technique of Vascular Repair in Intra-Operative IVC Rupture During Lumbar Microdiscectomy: A Case Report
241
Innovative techniques in modeling UPFC for power system analysis
242
Innovative technologies for cloned plants adaptation
243
Innovative technologies for cloned plants adaptation
244
Innovative Technologies for Information Resources Management, M. Khosrow-Pour. Information Science Reference (2009), ISBN: 978-1-59904-570-2
245
Innovative Technologies for Reducing Structural Vibrations due to Natural Events and Human Activities
246
Innovative technologies for the research and treatment of pain
247
Innovative technologies to solve oil-fields water injection sulfate problems Original Research Article
248
Innovative technology for processing saprolitic laterite ores by hydrochloric acid atmospheric pressure leaching
249
Innovative Technology in English Language Teaching: The Utility of Mobile Social Network Sites to Improve Teacher Education
250
Innovative Testing Investigations on the Influence of Particle Morphology and Oil Contamination on the Geotechnical Properties of Sand
251
Innovative theory for the compliance computation in rotors
252
Innovative therapy for hepatocellular carcinoma: Three-dimensional high-dose photon radiotherapy
253
Innovative thermoeconomic diagnosis of multiple faults in air conditioning units: Methodological improvements and increased reliability of results
254
Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers
255
Innovative tidal turbine with central deflector for the exploitation of river and sea currents in on-shore installations
256
Innovative tokamak DEMO first wall and divertor material concepts
257
INNOVATIVE TOOLS FOR WATER QUALITY MANAGEMENT AND POLICY ANALYSIS: DESERT AND STREAMPLAN
258
INNOVATIVE TOOLS FOR WATER QUALITY MANAGEMENT AND POLICY ANALYSIS: DESERT AND STREAMPLAN
259
Innovative transparent non-scattering TiO2 bactericide thin films inducing increased E. coli cell wall fluidity
260
Innovative Treatment Of A Rare Exaggerated Obsessive-Compulsive Reaction To Smell
261
Innovative trends and perspectives for erectile dysfunction treatment: A systematic review
262
Innovative tribometer for in situ spectroscopic analyses of wear mechanisms and phase transformation in ceramic femoral heads
263
Innovative two-stage anaerobic process for effective codigestion of cheese whey and cattle manure
264
Innovative ultrafiltration for wastewater reuse
265
Innovative unconventional oil extraction technologies
266
Innovative use of a bacterial enzyme involved in sialic acid degradation to initiate sialic acid biosynthesis in glycoengineered insect cells
267
Innovative use of biologically produced ferric sulfate for machining of copper metal and study of specific metal removal rate and surface roughness during the process
268
Innovative use of damaged fiberoptic bronchoscope
269
Innovative use of foraminifera in ecotoxicology: A marine chronic bioassay for testing potential toxicity of drilling muds
270
Innovative use of forest policy instruments in countries with economies in transition: experience of the Baltic States
271
Innovative Use of Graphite Pencil in Cranioplasty
272
Innovative Use of Information Technology by Colleges: By the Council of Library and Information Resources. Washington, D.C.: Council of Library and Information Resources, August 1999, 87 pp. $20.00. ISBN 1-88733470-X.
273
Innovative Use of Octopus IV Stabilizer in Cardiac Trauma
274
Innovative Use of Opsite Flexigrid™ for Digital Photography in Rhinoplasty
275
Innovative use of Sweet sorghum juice in the beverage industry
276
Innovative use of the home page for library instruction
277
Innovative Use of the Law to Address Complex Global Health Problems; Comment on “The Legal Strength of International Health Instruments What It Brings to Global Health Governance?”
278
Innovative uses of a cardiothoracic database
279
Innovative valve-regulated battery designs rekindle excitement inlead/acid battery technology
280
Innovative Veteran Public Service Policy in the Republic of Indonesia
281
Innovative vs. imitative R&D and economic growth
282
Innovative water resource solutions for Islands Original Research Article
283
Innovative Ways for Solid Waste Management in Dar-Es-Salaam: Toward Stakeholder Partnerships
284
Innovative Ways for Solid Waste Management in Dar-Es-Salaam: Toward Stakeholder Partnerships
285
Innovative wholesale carcass fabrication and retail cutting to optimize beef value
286
Innovative zeolite coatings on graphite plates for advanced adsorbers
287
Innovative-Didactic Program Complex and New Formalized Model of Education
288
Innovativeness among small businesses: Theory and propositions for future research
289
Innovativeness and capacity to innovate in a complexity of firm-level relationships: A response to Woodside (2004)
290
Innovativeness and Involvement as Determinants of Website Loyalty: I. A test of the style/involvement model in the context of Internet buying
291
Innovativeness and involvement as determinants of website loyalty: II. Determinants of consumer loyalty in B2C e-commerce
292
Innovativeness and Involvement as Determinants of Website Loyalty: III. Theoretical and managerial contributions
293
Innovativeness and organizational innovation in total quality oriented firms: The moderating role of market turbulence
294
Innovativeness of Polish enterprises in the initial period of system transformation
295
Innovativeness, population size and cumulative cultural evolution
296
Innovativeness: Its antecedents and impact on business performance
297
Innovativeness: Redefining the concept
298
Innovator Insights - Milton chang: been there, done that - showing others the way
299
Innovators and imitators: Organizational reference groups and adoption of organizational routines
300
Innovators and IP advisers: preparing for the dialogue
301
Innovatory designs for ducted wind turbines
302
innoversity in knowledge-for-action and adaptation to climate change: the first steps of an ‘evidence-based climatic health’ transfrontier training program
303
Innuendo
304
Innvervated human corneal equivalent a in vitro model for nerve-target cell interaction
305
INO prototype detector and data acquisition system
306
INO prototype detector and data acquisition system
307
INO–A WWW information system for innovative coatings and surface technology
308
Inobriation ond Inspirotion? A Review of the Research on Alcohol and Creativity
309
Inoceramid extinction in the Gubbio basin (northeastern Apennines of Italy) and relations with mid-Maastrichtian environmental changes
310
Inoceramid fauna and biostratigraphy of the upper Middle Coniacian–lower Middle Santonian of the Pueblo Section (SE Colorado, US Western Interior)
311
Inocula from activated sludge for ready biodegradability testing: Homogenization by preconditioning Original Research Article
312
Inoculants of Azospirillum brasilense: Biomass production, survival and growth promotion of Setaria italica and Zea mays
313
Inoculants of Azospirillum brasilense: Biomass production, survival and growth promotion of Setaria italica and Zea mays
314
Inoculated acicular ferrite microstructure and mechanical properties
315
Inoculated acicular ferrite microstructure and mechanical properties
316
Inoculated fermentation of green olives with potential probiotic Lactobacillus pentosus and Lactobacillus plantarum starter cultures isolated from industrially fermented olives Original Research Article
317
Inoculated Host Range and Effect of Host on Morphology and Size of Macroconidia Produced by Claviceps africana and Claviceps sorghi
318
Inoculating wheat seedlings with exopolysaccharide-producing bacteria restricts sodium uptake and stimulates plant growth under salt stress
319
Inoculation and alkali coeffect in volatile fatty acids production and microbial community shift in the anaerobic fermentation of waste activated sludge
320
Inoculation and start-up of a biotricking filter removing dimethyl sulfide
321
Inoculation Methods and Conidial Densities of Fusarium oxysporum f.sp. cubense in Abaca
322
Inoculation methods for selecting Populus tremuloides resistant to Hypoxylon canker
323
Inoculation of an atrazine-degrading strain, Chelatobacter heintzii Cit1, in four different soils: effects of different inoculum densities
324
Inoculation of Burkholderia cepacia, Pseudomonas fluorescens and Enterobacter sp. on Sorghum bicolor: Root colonization and plant growth promotion of dual strain inocula
325
Inoculation of Burkholderia cepacia, Pseudomonas fluorescens and Enterobacter sp. on Sorghum bicolor: Root colonization and plant growth promotion of dual strain inocula
326
Inoculation of Corn Seedlings with Piriformospora indica Influences Grain Biomass Yield, Forage Quality, Rumen Degradation Kinetics and Fourier Transformed Infrared Spectroscopy Molecular Structures
327
Inoculation of cucumber roots with zoospores of mycoparasitic and plant pathogenic Pythium species: Differential zoospore accumulation, colonization ability and plant growth response
328
Inoculation of food waste with the thermo-tolerant lipolytic actinomycete Thermoactinomyces vulgaris A31 and maturity evaluation of the compost
329
Inoculation of granular activated carbon in a fixed bed with S-triazine-degrading bacteria as a water treatment process
330
Inoculation of granular activated carbon with s-triazine-degrading bacteria for water treatment at pilot-scale
331
Inoculation of mares and very young foals with EHV-1 glycoproteins D and B reduces virus shedding following respiratory challenge with EHV-1
332
Inoculation of mares and very young foals with EHV-1 glycoproteins D and B reduces virus shedding following respiratory challenge with EHV-1
333
Inoculation of osteoclast precursors improves the phenotype of osteopetrotic oc/oc mice
334
Inoculation of Paenibacillus illinoisensis alleviates root mortality, activates of lignification-related enzymes, and induction of the isozymes in pepper plants infected by Phytophthora capsici
335
Inoculation of pearl millet with the downy mildew pathogen, Sclerospora graminicola: chilling inoculum to delay zoospore release and avoid spray damage to zoospores
336
Inoculation of Pichia kudriavzevii RB1 degrades the organic acids present in raw compost material and accelerates composting
337
Inoculation of rice plants with the endophytic diazotrophs Herbaspirillum seropedicae and Burkholderia spp.
338
Inoculation of root microorganisms for sustainable wheat–rice and wheat–black gram rotations in India
339
Inoculation of root microorganisms for sustainable wheat–rice and wheat–black gram rotations in India
340
Inoculation of soybean with selected strains of Bradyrhizobium japonicum can increase yield on acid soils in Indonesia
341
Inoculation of soybean with selected strains of Bradyrhizobium japonicum can increase yield on acid soils in Indonesia
342
Inoculation of steel welds with non-metallic particles
343
Inoculation of steel welds with non-metallic particles
344
Inoculation of sugarcane with Pantoea sp. increases amino acid contents in shoot tissues; serine, alanine, glutamine and asparagine permit concomitantly ammonium excretion and nitrogenase activity of the bacterium
345
Inoculation of Sunflower with Endophytic Fungi Alters Soil Physio-Chemical Properties to Nullify Drought Stress
346
Inoculation of the redox effector Pseudomonas fluorescens C7R12 strain affects soil redox status at the aggregate scale
347
Inoculation of the redox effector Pseudomonas fluorescens C7R12 strain affects soil redox status at the aggregate scale
348
Inoculation of transition elements by addition of AlB2 and AlB12 to decrease detrimental effect on the conductivity of 99.6% aluminium in CCL for manufacturing of conductor
349
Inoculation with Arbuscular Mycorrhizal Fungi or Crop Rotation with Mycorrhizal Plants Improves the Growth of Maize in Limed Acid Sulfate Soil
350
Inoculation with Bradyrhizobium japonicum enhances the organic and fatty acids content of soybean (Glycine max (L.) Merrill) seeds
351
Inoculation with phosphate-solubilizing microorganisms and a vesicular-arbuscular mycorrhizal fungus improves dry matter yield and nutrient uptake by wheat grown in a sandy soil
352
Inoculation with Pseudomonas fluorescens biocontrol strains does not affect the symbiosis between rhizobia and forage legumes
353
Inoculation with Pseudomonas fluorescens biocontrol strains does not affect the symbiosis between rhizobia and forage legumes
354
Inoculation with Xanthomonas oryzae pv. oryzae induces thylakoid membrane association of Rubisco activase in Oryza meyeriana
355
Inoculative Augmentation of the Fungal Entomopathogen Entomophaga maimaiga as a Homeowner Tactic to Control Gypsy Moth (Lepidoptera: Lymantriidae)
356
Inoculative releases of Trichogramma ostriniae for suppression of Ostrinia nubilalis (European corn borer) in sweet corn: field biology and population dynamics
357
Inoculum Density and Population Dynamics of Suppressive and PathogenicStreptomycesStrains and Their Relationship to Biological Control of Potato Scab
358
Inoculum prevalence, host infection and biological control of Colletotrichum acutatum: causal agent of blueberry anthracnose in British Columbia
359
Inoculum size and intraspecific interactions affects Penicillium expansum growth and patulin accumulation in apples Original Research Article
360
Inoculum size and severity of malaria induced with Plasmodium ovale
361
Inoculum Size of Clostridium botulinum 56A Spores Influences Time-to-Detection and Percent Growth-Positive Samples
362
Inoculum Sources and Genotypic Diversity of Phytophthora infestans in Southern Flevoland, The Netherlands
363
Inoculum type response to different pHs on biohydrogen production from l-arabinose, a component of hemicellulosic biopolymers
364
In-office bleaching gel with 35% hydrogen peroxide enhanced biofilm formation of early colonizing streptococci on human enamel
365
In-office bleaching gel with 35% hydrogen peroxide enhanced biofilm formation of early colonizing streptococci on human enamel
366
In-Office Treatment of Dentinal Hypersensitivity
367
In-office Vital Bleaching with Adjunct Light
368
I-NoLLS: A program for interactive nonlinear least-squares fitting of the parameters of physical models Original Research Article
369
Inometric methods and measures for sharing knowledge over internet
370
Inonotus dryadeus in North America: new records, hosts, distribution and incidence
371
Inonotus obliquus containing diet enhances the innate immune mechanism and disease resistance in olive flounder Paralichythys olivaceus against Uronema marinum
372
Inoperable adenocarcinoma of the oesophagogastric junction: a comparative clinical study of laser coagulation versus self-expanding metallic stents with special reference to cost analysis
373
Inoperable pulmonary vascular disease in infants with congenital heart disease
374
In-operation modal analysis of containments using ambient vibration
375
In-orbit assessment of laser retro-reflector efficiency onboard high orbiting satellites Original Research Article
376
In-orbit calibration approach of the MICROSCOPE experiment for the test of the equivalence principle at 10^-15
377
In-orbit calibration of drag-free satellites Original Research Article
378
In-Orbit Calibration Strategy for Ocean Color Sensors
379
In-orbit demonstration of rendezvous laser radar for unmanned autonomous rendezvous docking
380
In-orbit repositioning of multiple solar sail spacecraft
381
In-orbit thruster calibration techniques and experiment results with UoSAT-12
382
Inorganic acid-catalyzed tautomerization of vinyl alcohol to acetaldehyde
383
Inorganic adsorbent containing polymeric membrane reservoir for the recovery of lithium from seawater
384
Inorganic aerosol formation and deposition during fluidized bed combustion of biomasses and wood waste
385
Inorganic ammonium salts as catalysts for direct aldol reactions in the presence of water
386
Inorganic analysis of dust fall and office dust in an industrial area of Jordan
387
Inorganic and biogenic As-sulfide precipitation at seafloor hydrothermal fields
388
Inorganic and Bioinorganic Solvent Exchange Mechanisms
389
Inorganic and hybrid hollow spheres by coating of microcapsules as templates
390
Inorganic and methylmercury: Do they transfer along a tropical coastal food web?
391
Inorganic and organic carbon dynamics in a limed acid soil are mediated by plants
392
Inorganic and organic carbon dynamics in a limed acid soil are mediated by plants
393
Inorganic and Organic Fe Sources Increased Crude Oil Biodegradation in Soil Under Cultivation of the Canola Plant Inoculated with Piriformospora indica
394
Inorganic and organic N pools in soils burned or heated: immediate alterations and evolution after forest wildfires
395
Inorganic and organic nitrogen cycling in the Southern California Bight
396
Inorganic and organic nitrogen uptake by phytoplankton and heterotrophic bacteria in the stratified Mid-Atlantic Bight
397
Inorganic and organic phosphorus pools in earthworm casts (Glossoscolecidae) and a Brazilian rainforest Oxisol
398
Inorganic and organic phosphorus pools in earthworm casts (Glossoscolecidae) and a Brazilian rainforest Oxisol
399
Inorganic and organic sinking particulate phosphorus fluxes across the oxic/anoxic water column of Cariaco Basin, Venezuela
400
Inorganic and organic UV filters: Their role and efficacy in sunscreens and suncare products
401
Inorganic and Organic Zinc Sources and Piriformospora indica Fungus on Reducing the Risk of Cadmium and Lead Due to the Lettuce (Lactuca sativa) Consumption
402
Inorganic and organometallic cobaloximes with dioxime containing Se side chain: Synthesis, characterization and comparison with related B12 model compounds
403
Inorganic arsenic and stroke
404
Inorganic arsenic exposure and type 2 diabetes mellitus in Mexico
405
Inorganic arsenic in cooked rice and vegetables from Bangladeshi households☆
406
Inorganic arsenic in seafood: Does the extraction method matter?
407
Inorganic arsenic levels in baby rice are of concern
408
Inorganic Arsenic Poisoning Following an Intentional Overdose of Realgar-Containing Niu Huang Jie Du Pian: a Case Report and Literature Review
409
Inorganic Arsenic Removal by Zero-Valent Iron
410
Inorganic arsenic speciation analysis of water samples by trapping arsine on tungsten coil for atomic fluorescence spectrometric determination
411
Inorganic arsenic speciation in the waters of the Penzé estuary (NW France): Seasonal variations and fluxes to the coastal area
412
Inorganic arsenic speciation in water and seawater by anodic stripping voltammetry with a gold microelectrode Original Research Article
413
Inorganic As speciation and bioavailability in estuarine sediments of Todos os Santos Bay, BA, Brazil
414
Inorganic block copolymer lithography
415
Inorganic carbon acquisition by Dunaliella tertiolecta (Chlorophyta) involves external carbonic anhydrase and direct HCO3- utilization insensitive to the anion exchange inhibitor DIDS
416
Inorganic carbon and nutrient fluxes on the Arctic Shelf
417
Inorganic carbon and pH levels in the Rockall Trough 1991–2010
418
Inorganic carbon dynamic and air–water CO2 exchange in the Guadalquivir Estuary (SW Iberian Peninsula)
419
Inorganic carbon dynamics during northern California coastal upwelling
420
Inorganic carbon fluxes through the boundaries of the Greenland Sea Basin based on in situ observations and water transport estimates
421
Inorganic carbon in the central California upwelling system during the 1997–1999 El Niño–La Niña event
422
Inorganic carbon in the Labrador Sea: Estimation of the anthropogenic component
423
Inorganic carbon isotope systematics in soil profiles undergoing silicate and carbonate weathering (Southern Michigan, USA)
424
Inorganic carbon limitations on nitrification: Experimental assessment and modelling
425
Inorganic carbon turnover caused by digestion of carbonate sands and metabolic activity of holothurians
426
Inorganic chemicals in an effluent-dominated stream as indicators for chemical reactions and streamflows
427
Inorganic Chemistry : Research and Teaching : Retrospect and Prospect
428
Inorganic chemistry calculations using HETV—a vectorized solver for the SO42−–NO3−–NH4+ system based on the ISORROPIA algorithms
429
Inorganic chemistry of O2 in a dense primitive atmosphere
430
Inorganic Chemistry: The next generation
431
Inorganic cobaloximes with mixed dioxime equatorial ligands: a convenient one pot synthesis and cis influence studies: X-ray crystal structures of N3CoIII(dmgH)(dpgH)Py and N3CoIII(chgH)(dpgH)Py
432
Inorganic cobalt supplementation: Prediction of cobalt levels in whole blood and urine using a biokinetic model
433
Inorganic Complex Precursor: Preparation of Cu-Mn/SiO2 Mixed Oxide Nanocatalyst for Low-Temperature Water-Gas Shift Reaction
434
Inorganic Components of Drinking Water and Microalbuminuria
435
Inorganic composition and sources of aerosols in a Central African rainforest during the dry season
436
Inorganic composition of the envelopes of Trachelomonas Ehr. (Euglenophyta)
437
Inorganic Compound (Apatite doped by Mg and Na) as a Corrosion Inhibitor for Mild Steel in Phosphoric Acidic Medium
438
Inorganic constituents formed during small-scale gasification of poultry litter: A model based study
439
Inorganic constituents in surface runoff from urbanised areas in winter: the case study of the city of Brest, Belarus
440
Inorganic contaminants in Arctic Alaskan ecosystems: long-range atmospheric transport or local point sources?
441
Inorganic copolymers based on silanes and ferrocene monomers, precursors for advanced nanostructured ceramics
442
Inorganic crystal structures from powder data-A retrospection
443
Inorganic crystal structures from powder data-A retrospection
444
Inorganic delivery vector for intravenous injection
445
Inorganic deterioration affecting the Altamira Cave, N Spain: quantitative approach to wall-corrosion solutional etching/ processes induced by visitors
446
Inorganic electrolyte additives to suppress the degradation of graphite anodes by dissolved Mn(II) for lithium-ion batteries
447
Inorganic Electronic Structure and Spectroscopy, Edited by E.I. Solomon and A.B.P. Lever, Wiley-Interscience, New York, 1999. Volume 1 — Methodology, xiv+732 pp. Volume 2 — Applications and Case Studies, xiv+658 pp. ISBN 0-471-32683-6; £186.00 (set)
448
Inorganic element concentrations in near surface aerosols sampled on the northwest slopes of Mount Kenya
449
Inorganic elemental compositions of commercial multivitamin/mineral dietary supplements: Application of collision/reaction cell inductively coupled-mass spectroscopy
450
Inorganic elements in tree compartments of Picea abies—Concentrations versus stem diameter in wood and bark and concentrations in needles and branches
451
Inorganic EPR dosimeter for medical radiology
452
Inorganic fertilizer enrichment of soil: effect on decomposition of plant litter under subhumid tropical conditions
453
Inorganic fertilizer use and biodiversity risk: An empirical investigation
454
Inorganic Films from Three Different Phosphors via a Liquid Coating Route from Inverse Miniemulsions
455
Inorganic fluorine chemistry, 1961–1999
456
Inorganic fly-ash spheres as pollution tracers Original Research Article
457
Inorganic formation of apatite in brackish seawater from the Baltic Sea: an experimental approach
458
Inorganic foulants in membrane systems: chemical control strategies and the contribution of “green chemistry” Original Research Article
459
Inorganic fouling at quartz: water interfaces in ultraviolet photoreactors: III. Numerical modelling
460
Inorganic fouling at quartz:water interfaces in ultraviolet photoreactors: II. Temporal and spatial distributions
461
Inorganic fouling at quartz:water interfaces in ultraviolet photoreactors—I. Chemical characterization
462
Inorganic fouling of pressure-driven membrane processes — A critical review Original Research Article
463
Inorganic fullerene-like nanoparticles of TiS2
464
Inorganic geochemistry of Albian sediments from the Lower Saxony Basin NW Germany: palaeoenvironmental constraints and orbital cycles
465
Inorganic glasses and glass-ceramics studied by isothermal mechanical spectroscopy
466
Inorganic glasses as Kerr-like media
467
Inorganic heterogeneous catalysts for biodiesel production from vegetable oils
468
Inorganic hybrid open-framework structures: synthesis and structure of a cobalt phosphate-oxalate, [C4N2H12]0.5[Co2(HPO4)(C2O4)1.5]
469
Inorganic hydrophobic coatings: Surfaces mimicking the nature
470
Inorganic immersion fluids for ultrahigh numerical aperture 193 nm lithography
471
Inorganic ion and nitrogen isotopic compositions of atmospheric aerosols at Yurihonjo, Japan: Implications for nitrogen sources
472
INORGANIC ION EXCHANGERS, PAST, PRESENT, AND FUTURE
473
Inorganic ions and ion balance in atmospheric aerosol in the Finnish Arctic
474
Inorganic layered double hydroxides as a drug delivery system—intercalation and in vitro release of fenbufen
475
Inorganic layered double hydroxides as ascorbic acid (vitamin C) delivery system—Intercalation and their controlled release properties
476
Inorganic materials as supports for palladium nanoparticles: Application in the semi-hydrogenation of phenylacetylene
477
Inorganic materials for the negative electrode of lithium-ion batteries: state-of-the-art and future prospects
478
Inorganic matter characterization in vegetable biomass feedstocks
479
Inorganic membranes and solid state sciences
480
Inorganic membranes made of sintered clay for the treatment of biologically modified water Original Research Article
481
Inorganic Mercury Detection and Controlled Release of Chelating Agents from Ion-Responsive Liposomes
482
Inorganic mercury vapour and foetal abnormalities in humans
483
Inorganic microencapsulated core/shell structure of Al–Si alloy micro-particles with silane coupling agent
484
Inorganic modification of block copolymer for medium temperature proton exchange membrane application
485
Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells
486
Inorganic molecular wires: Physical and functional properties of transition metal chalco-halide polymers
487
Inorganic monoliths in separation science: A review Review Article
488
Inorganic nanomaterials as delivery systems for proteins, peptides, DNA, and siRNA
489
Inorganic Nanomaterials: A Brief Overview of the Applications and Developments in Sensing and Drug Delivery
490
Inorganic nanoparticle-based ionic liquid lubricants
491
Inorganic nanoparticles as carriers for efficient cellular delivery
492
Inorganic nanoparticles for therapeutic delivery: Trials, tribulations and promise
493
Inorganic nanoparticles in drug delivery
494
Inorganic nanoparticles prepared in miniemulsion
495
Inorganic Nanoparticles: Toxic Effects, Mechanisms of Cytotoxicityand Phytochemical Interactions
496
Inorganic Nanostructures Especially Obtained from Liquid/Liquid Interface by Reduction of Organometallic Precursors: A Mini Review
497
Inorganic nanosystems for therapeutic delivery: Status and prospects
498
Inorganic nanotube composites based on polyaniline: Potential room-temperature hydrogen storage materials
499
Inorganic nanotubes
500
Inorganic nanowires
501
Inorganic nitrate is a possible source for systemic generation of nitric oxide
502
Inorganic Nitrate Therapy Improves Doxorubicin-Induced Cardiomyopathy: A New Window for an Affordable Cardiovascular Therapy for Everyone?
503
Inorganic nitrogen control in a novel zero-water exchanged aquaculture system integrated with airlift-submerged fibrous nitrifying biofilters
504
Inorganic nitrogen control in wastewater treatment ponds from a fish farm (Orbetello, Italy): Denitrification versus Ulva uptake
505
Inorganic nitrogen deposition in Chinaʹs forests: Status and characteristics
506
Inorganic nitrogen dynamics in fallows and maize on an Oxisol and Alfisol in the highlands of Kenya
507
Inorganic nitrogen fertilizers induce changes in ammonium assimilation and gas exchange in Camellia sinensis L.
508
Inorganic nitrogen in a tropical soil with frequent amendments of sewage sludge
509
Inorganic nitrogen storage in alpine snow pack in the Central Alps (Switzerland)
510
Inorganic nitrogen transformations within permeable carbonate sands
511
Inorganic nitrogen, microbial biomass and microbial activity of a sandy Brazilian Cerrado soil under different land uses
512
Inorganic Nutrient and Carbon Controlled Bacterioplankton Growth in the Baltic Sea
513
Inorganic particle gels
514
Inorganic particle toughening I: micro-mechanical deformations in the fracture of glass bead filled epoxies
515
Inorganic particle toughening II: toughening mechanisms of glass bead filled epoxies
516
Inorganic phase composition of remineralisation in porous CaP ceramics
517
Inorganic phosphate crystal Na15−n[Al(PO4)2F2]3−n[Ti(PO4)2F2]n (0 ≤ n < 1): A novel cation exchanger with high exchange selectivity for Li+ and Pb2+ ions
518
Inorganic phosphate induces apoptosis of osteoblast-like cells in culture
519
Inorganic Phosphate Promotes Redox Cycling of Iron in Liver Microsomes: Effects on Free-Radical Reactions
520
Inorganic phosphate stimulates apoptosis in murine MO6-G3 odontoblast-like cells
521
Inorganic phosphorus and manure effects on bahiagrass production on a Spodosol
522
INORGANIC PHOSPHORUS FORMS IN ALLUVIAL an‎d CALCAREOUS SOILS AS AFFECTED BY DIFFERENT PHOSPHORUS APPLICATION LEVELS an‎d INCUBATION PERIODS.
523
Inorganic phosphorus forms in some entisols and aridisols of Egypt
524
Inorganic pigment study of the San Pedro Gonzalez Telmo Sibyls using total reflection X-ray fluorescence
525
Inorganic pigments doped with tris(pyrazol-1-yl)borate lanthanide complexes: A photoluminescence study
526
Inorganic pigments made from the recycling of coal mine drainage treatment sludge
527
Inorganic plasma with physiological CO2/HCO3− buffer
528
Inorganic PM2.5 at a U.S. agricultural site
529
Inorganic polymer phosphazene disulfide as cathode material for rechargeable lithium batteries
530
Inorganic polymeric foam as a sound absorbing and insulating material
531
Inorganic polymeric phosphate/polyphosphate as an inducer of alkaline phosphatase and a modulator of intracellular Ca2+ level in osteoblasts (SaOS-2 cells) in vitro
532
Inorganic polymers as novel chromatographic stationary phase media
533
Inorganic polymers from alkali activation of metakaolin: Effect of setting and curing on structure
534
Inorganic polyphosphates are stored in spherites within the midgut of Anticarsia gemmatalis and play a role in copper detoxification
535
Inorganic proton-conducting gel glass/porous alumina nanocomposite
536
Inorganic Pyrophosphate Gives a Membrane Potential in Yeast Mitochondria, as Measured with the Permeant Cation Tetraphenylphosphonium
537
Inorganic Salt Crystallohydrates as Phase-Change Materials for Low-Grade Solar Energy Storage. 1. Selection of Long-Term Crystallohydrates
538
Inorganic salts as hold-up time markers in C18 columns
539
Inorganic salts effect on the properties of polyaniline
540
Inorganic salts influence IAA ionization and adventitious rhizogenesis in Pongamia pinnata
541
Inorganic salts of biguanide – Searching for new materials for second harmonic generation
542
Inorganic salt-tuned multiple self-assemblies of supramolecular β-cyclodextrin gel
543
Inorganic scintillation detectors in γ-ray spectrometry
544
Inorganic scintillation detectors in γ-ray spectrometry
545
Inorganic scintillators in medical imaging detectors
546
Inorganic scintillators in medical imaging detectors
547
Inorganic scintillators: today and tomorrow
548
Inorganic scintillators—a basic material for instrumentation in physics
549
Inorganic scintillators—a basic material for instrumentation in physics
550
Inorganic selenium speciation in environmental samples using selective electrodeposition coupled with electrothermal atomic absorption spectrometry
551
Inorganic selenium speciation in environmental samples using selective electrodeposition coupled with electrothermal atomic absorption spectrometry
552
Inorganic self-assembly
553
Inorganic sensors utilizing MEMS and microelectronic technologies
554
Inorganic silica functionalized with PLLA chains via grafting methods to enhance the melt strength of PLLA/silica nanocomposites
555
Inorganic small colloidal particles
556
Inorganic soil nitrogen distribution in relation to soil properties in smallholder maize fields in the Kenya highlands
557
Inorganic solid Li ion conductors: An overview
558
Inorganic solid state optical materials:: Major recent advances
559
Inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology
560
Inorganic species formation in a discharged water generating system
561
Inorganic species of arsenic in soil solution determined by microcartridges and ferrihydrite-based diffusive gradient in thin films (DGT)
562
Inorganic Syntheses, Vol. 32: M.Y. Darensbourg (Ed.), Wiley, New York, 1998, xxiii + 331 pages, hardback, ISBN 0-471-24921-1, US$ 89.95
563
Inorganic thermal-neutron scintillators
564
Inorganic thermal-neutron scintillators
565
Inorganic tin compounds as flame retardants and smoke suppressants for polyester thermosets
566
Inorganic to organic crossover in thin films deposited from O2/TEOS plasmas
567
Inorganic UV absorber from Tri E Technologies
568
Inorganic UV absorbers for the photostabilisation of wood-clearcoating systems: Comparison with organic UV absorbers
569
Inorganic water soluble ions in atmospheric particles over Maracaibo Lake Basin in the western region of Venezuela
570
Inorganic whiskers reinforced bismaleimide composites
571
Inorganic, isotopic, and organic composition of high-chloride water from wells in a coastal southern California aquifer
572
Inorganic, organic and macromolecular components of fine aerosol in different areas of Europe in relation to their water solubility
573
Inorganic/organic mesoporous silica as a novel fiber coating of solid-phase microextraction
574
Inorganically modified diatomite as a potential prolonged-release drug carrier
575
Inorganic–inorganic nanocomposite: Surface and conductive properties Original Research Article
576
Inorganic-N release from spent mushroom compost under laboratory and field conditions
577
Inorganic-N release from spent mushroom compost under laboratory and field conditions
578
Inorganic–organic fiber sizings for enhanced energy absorption in glass fiber-reinforced composites intended for structural applications
579
Inorganic–organic hybrid coatings on polycarbonate.: Spectroscopic studies on the simultaneous polymerizations of methacrylate and silica networks
580
Inorganic–organic hybrid coatings with mixed metal oxides
581
Inorganic–organic hybrid compound with face-sharing iodoplumbate chains showing novel dielectric relaxation
582
Inorganic–organic hybrid compounds exhibiting both magnetic order and non-linear optical properties
583
Inorganic–organic hybrid compounds: Synthesis and characterization of three new metal phosphonates with similar characteristic structural features
584
Inorganic–organic hybrid double sulfates as catalysts of the diastereoselective nitroaldol reaction
585
Inorganic–organic hybrid films using epoxycyclohexylethyltrimethoxysilane and orthophosphoric acid for PEFC operated at medium temperatures
586
Inorganic–organic hybrid framework materials: Synthesis and characterization of [{Co(H2O)(L)}2V4O12] (L = pyridine, 4-methlypyridine)
587
Inorganic–organic hybrid framework solids
588
Inorganic–organic hybrid material containing β-cage: {[H2(en)]Co2(ox)(V4O12)}n
589
Inorganic–organic hybrid materials based on Co(III) tetra-aza-macrocyclic complexes and Lindqvist type poly-oxo anions: Synthesis, characterization and spectroscopy of [CoIII(L)(NO2)2]2[Mo6O19] and [CoIII(L)(NCS)2]2[W6O19]·2CH3CN (L = Transdiene
590
Inorganic-Organic Hybrid Materials Containing Porous Frameworks: Synthesis, Characterization, and Magnetic Properties of the Open Framework Solids [{Co(4,4-Bipy)}V2O6] and [{Co2(4,4-Bipy)3(H2O)2} V4O12]·2H2O
591
Inorganic–organic hybrid materials of p,p′-diphenylmethylenediphosphinic acid (H2pcp) with magnesium and calcium ions: Synthesis and characterization of [Mg(Hpcp)2], [Mg(Hpcp)2(H2O)4], [Mg(pcp)(H2O)3](H2O), [Ca(Hpcp)2] and [Ca(pcp)(H2O)] complexes
592
Inorganic–Organic Hybrid Materials: Hydrothermal Synthesis and Characterization of the Metal Diphosphonates M2(O3PCH2C6H4CH2PO3)·2H2O (M=Mn, Ni, Cd)
593
Inorganic-Organic Hybrid Materials: Synthesis and Structure of a Reduced Ferrous Molybdophosphate, [(C12H8N2)3FeII]2[Fe11MOV12(H2PO4)6(PO4)2(OH)6O24], in the Presence of Fe(II)(1,10-Phenanthroline)3 Complex
594
Inorganic–Organic Hybrid Materials: Synthesis and X-Ray Structure of N,N-Dimethylimidazolium Salts [(Me2Im)2] [Cd2(SCN)6] and N,N-Dicyclohexylimidazolium [(Cy2Im)2][Cd2(SCN)6]·C3H6O
595
Inorganic–organic hybrid membranes prepared from 3-aminopropyltriethoxysilane and sulfuric acid as anhydrous proton conductors
596
Inorganic–organic hybrid membranes with anhydrous proton conduction prepared from tetraethoxysilane, 3-glycidyloxypropyltrimethoxysilane, trimethyl phosphate and diethylethylammonium trifluoromethanesulfonate
597
Inorganic–organic hybrid metal complexes: 24-membered hexaazamacrocyclic dinuclear nickel complexes hybridized with CdBr42−
598
Inorganic-organic hybrid nanomaterial (Fe3O4@SiO2-AQ): A retrievable heterogeneous catalyst for the green synthesis of 4H-chromenes
599
Inorganic–organic hybrid nanoporous materials as adsorbent to remove VOCs
600
Inorganic–organic hybrid polymers with pendent sulfonated cyclic phosphazene side groups as potential proton conductive materials for direct methanol fuel cells
601
Inorganic–organic hybrid polyoxometalate nanoparticle modified wax impregnated graphite electrode: preparation, electrochemistry and electrocatalysis
602
Inorganic–organic hybrid polyoxometalate: Preparation, characterization and electrochemistry properties
603
Inorganic–organic hybrid porous materials based on graphite oxide sheets Original Research Article
604
Inorganic–organic hybrid semiconductor nanomaterials: (ZnSe)(N2H4)x(C5H5N)y
605
Inorganic–organic hybrid structure: Synthesis, structure and magnetic properties of a cobalt phosphite–oxalate, [C4N2H12][Co4(HPO3)2(C2O4)3]
606
Inorganic–organic hybrid with one-dimensional face-sharing iodoplumbate chain showing novel dielectric anomaly and semiconductor emission
607
Inorganic–organic hybrids of silicon fluorides of high crystallinity
608
Inorganic–organic hybrids presenting high basic center content: SBA-15 incorporation, toxic metals sorption and energetic behavior
609
Inorganic–organic hybrids produced from tetraethoxysilane and 2-hydroxybenzyl alcohol as studied by solid-state 13c and 29Si nmr spectroscopy
610
Inorganic–organic interpenetrating polymer networks involving polyhedral oligomeric silsesquioxane and poly(ethylene oxide)
611
Inorganic–organic membranes based on Nafion, [(ZrO2)·(HfO2)0.25] and [(SiO2)·(HfO2)0.28] nanoparticles. Part II: Relaxations and conductivity mechanism
612
Inorganic–organic membranes based on Nafion, [(ZrO2)·(HfO2)0.25] and [(SiO2)·(HfO2)0.28]. Part I: Synthesis, thermal stability and performance in a single PEMFC
613
Inorganic–organic nanohybrid of MoS2‑PANI for advanced photocatalytic application
614
Inorganic–organic rubbery scintillators
615
Inorganic–organic rubbery scintillators
616
Inorganic–orgnic composite protonic conductors comprising silicophosphate glass and ion-exchange resin
617
Inorganics distribution in bio oils and char produced by biomass fast pyrolysis: The key role of aerosols
618
Inorganics distribution in bio oils and char produced by biomass fast pyrolysis: The key role of aerosols
619
Inorganic-scintillator development
620
Inorganic-scintillator development
621
Inorgano-organic proton conducting membranes for fuel cells and sensors at medium temperatures
622
iNOS enhances rat intestinal apoptosis after ischemia-reperfusion
623
iNOS induction and PARP-1 activation in human atherosclerotic lesions: an immunohistochemical and ultrastructural approach
624
Inosine promotes functional recovery in stroke model
625
Inosine reduces microcirculatory disturbance and inflammatory organ damage in experimental acute pancreatitis in rats
626
Inosine substitutions demonstrate that intramolecular DNA quadruplexes adopt different conformations in the presence of sodium and potassium
627
Inositides in the nucleus: presence and characterisation of the isozymes of phospholipase β family in NIH 3T3 cells
628
Inositol 1,4,5-trisphosphate Receptor Contains Multiple Cavities and L-shaped Ligand-binding Domains
629
Inositol 1-,4-,5-trisphosphate-dependent Ca2+ signaling by the recombinant human PTH/PTHrP receptor stably expressed in a human kidney cell line
630
Inositol and phosphatidylinositol-mediated invertase secretion in Schizosaccharomyces pombe
631
Inositol derived crown ethers: effect of auxiliary protecting groups and the relative orientation of crown ether oxygen atoms on their metal ion binding ability
632
Inositol Hexakisphosphate Kinase Products Contain Diphosphate and Triphosphate Groups Original Research Article
633
Inositol hexaphosphate reduces 12-O-tetradecanoylphorbol-13-acetate-induced ornithine decarboxylase independent of protein kinase C isoform expression in keratinocytes
634
Inositol levels are decreased in postmortem brain of schizophrenic patients
635
Inositol monophosphatase activity in normal, Down syndrome and dementia of the Alzheimer type CSF
636
Inositol phosphate content and trypsin inhibitor activity in ready-to-eat cruciferous sprouts
637
Inositol Phosphate Content of Selected Dry Beans, Peas, and Lentils, Raw and Cooked
638
Inositol Phosphate Content of Some Cereal-Based Foods
639
Inositol phosphate degradation by the action of phytase enzyme in legume seeds
640
Inositol Phosphate Metabolism During Myocardial Ischemia
641
Inositol phosphate responses in portal veins from portal hypertensive rats: receptor- and nonreceptor-mediated responses
642
Inositol Phosphate, Calcium, Magnesium, and Zinc Contents of Selected Breakfast Cereals
643
Inositol Phosphates in Rat Atria and the Importance of the Extraction Procedure
644
Inositol phosphates with different numbers of phosphate groups influence iron absorption in humans
645
Inositol Phosphates—Linking Agriculture and the Environment, B.L. Turner, A.E. Richardson, E. Mullaney. CAB International Wallingford, Oxfordshire, UK (2007)
646
Inositol Polyphosphates Regulate Ca2+ Efflux in a Cardiac Membrane Subtype Distinct from Junctional Sarcoplasmic Reticulum
647
Inositol Pyrophosphates Get the Vip1 Treatment
648
Inositol Pyrophosphates Inhibit Akt Signaling, Thereby Regulating Insulin Sensitivity and Weight Gain
649
Inositol Pyrophosphates Mediate Chemotaxis in Dictyostelium via Pleckstrin Homology Domain-PtdIns(3,4,5)P3 Interactions
650
Inositol transport in mouse oocytes and preimplantation embryos: effects of mouse strain, embryo stage, sodium and the hexose transport inhibitor, phloridzin
651
Inositol transport in preimplantation rabbit embryos: effects of embryo stage, sodium, osmolality and metabolic inhibitors
652
Inositol tripyrophosphate: a new membrane permeant allosteric effector of haemoglobin
653
Inositol trisphosphate receptors: Ca2+-modulated intracellular Ca2+ channels
654
Inositols and carbohydrates in different fresh fruit juices
655
Inositols and methylinositols in sea buckthorn (Hippophaë rhamnoides) berries
656
Inotropes
657
Inotropes in the hypoplastic left heart syndrome: Effects in an animal model
658
Inotropic agents in apical ballooning syndrome: A therapeutical dilemma
659
Inotropic and Chronotropic Effects of 6-Hydroxy-4- Methylquinolin-2(1H)-One Derivatives in Isolated Rat Atria
660
Inotropic stimulation by dobutamine increases left ventricular regional function at the expense of metabolism in hibernating myocardium
661
Inotropic therapy for heart failure: An evidence-based approach
662
Inotropy, calcium, and heart failure: a personal perspective
663
Inoue balloon mitral valvotomy in patients with atrial septal aneurysm
664
Inoue balloon mitral valvotomy in patients with severe valvular and subvalvular deformity
665
In–out asymmetry of low-Z impurity deposition on the JT-60U divertor tiles
666
In–out divertor flow asymmetries during ELMs in ASDEX Upgrade H-mode plasmas
667
Inovasi Dalam Kejuruteraan Mekatronik : Perbandingan Pencapaian Pelajar Yang Berorentasikan Kemahiran Analisis Dengan Berorentasikan Sosial
668
Inovasi dan Kreativiti Dalam Rekabentuk Buku Teks Sekolah Menengah: Aplikasi Pendekatan Interpretive Structural Modeling (ISM)
669
Inovasi dan Retensi dalam Dialek Hulu Tembeling
670
INOVASI PERKHIDMATAN AWAM MALAYSIA MELALUI PELAKSANAAN E-KERAJAAN: SATU KAJIAN EMPIRIK TENTANG PENERIMAAN E-SERVIS DI LEMBAH KELANG
671
Inovative utilization of resources during re-engineering
672
In-ovo Cadmium Toxicity in Developing Quail Embryo (Coturnix japonica): Sex-dependent Responses to Ascorbic Acid Protection
673
InOx semiconductor films deposited on glass substrates for transparent electronics
674
Inozemtsevʹs hyperbolic spin model and its related spin chain Original Research Article
675
InP based photonic crystal microlasers on silicon wafer
676
InP based quantum dash lasers with 2 (mu)m wavelength
677
InP crystals-ion implantation and laser annealing: RHEED, XPS and computer simulation studies
678
InP nanocrystals by aerotaxy method
679
InP solid state detector for measurement of low energy solar neutrinos
680
InP solid state detector for measurement of low energy solar neutrinos
681
InP(001) surface structure and interaction with atomic hydrogen
682
InP(100)-(2 × 4) surface electronic structure studied by angle-resolved photoelectron spectroscopy
683
InP/GaAs 0.51Sb 0.49/InP fully self-aligned double heterojunction bipolar transistors with a C-doped base: a preliminary reliability study
684
InP/GaAs 0.51Sb 0.49/InP fully self-aligned double heterojunction bipolar transistors with a C-doped base: a preliminary reliability study
685
InP/GaAsSb type-II DHBTs with f/sub T/>350 GHz
686
In-package atmospheric pressure cold plasma treatment of strawberries Original Research Article
687
INPADOC: 30 years of endeavours yet unmapped territories remain!
688
Inpainting of Binary Images Using the Cahn–Hilliard Equation
689
Inpatient and follow-up cardiology care and mortality for acute coronary syndrome patients in the Veterans Health Administration
690
Inpatient bed management considering collaboration strategy to enhance hospital resilience
691
Inpatient Buprenorphine-Assisted Withdrawal for Treatment of Vulnerable Adolescents with Opioids Use Disorder in Zahedan, Iran: An Observational Study
692
Inpatient Care Costs of COVID-19 in South Africa’s Public Healthcare System
693
In-patient care costs of patients with bipolar I disorder: A comparison between two European centers
694
Inpatient care in Kazakhstan: A comparative analysis
695
Inpatient Cognitive Behavior Therapy for Severe Eating Disorders
696
Inpatient Data, Inevitable Need for Policy Making at National and Sub-national levels: A Lesson Learned from NASBOD
697
Inpatient disposition classification for the creation of hospital surge capacity: a multiphase study
698
Inpatient falls and injuries in older patients treated for femoral neck fracture
699
Inpatient general medicine is evidence based
700
Inpatient Heart Failure Teaching: Bringing Focused Education to the Bedside
701
Inpatient hospital care for lumbar intervertebral disc disorders in Finland in relation to education, occupational class, income, and employment
702
In-Patient International Normalized Ratio Self-Testing Instruction After Mechanical Heart Valve Implantation
703
Inpatient malnutrition screening: far from ‘NICE’
704
Inpatient management of diabetes mellitus
705
Inpatient management of type 2 Diabetes Mellitus: Does choice of insulin regimen really matter?
706
Inpatient Monotherapy Studies in Epilepsy: Con
707
Inpatient Monotherapy Studies in Epilepsy: Pro
708
Inpatient Opioid Withdrawal Management of Street Children and Adolescents Admitted to Child and Adolescent Psychiatric Ward: A Preliminary Case Series
709
Inpatient Out-of-Pocket in Iran After Health Transformation Plan
710
Inpatient Physiotherapy Management for Stiff-Person Syndrome: A Case Report
711
Inpatient prescribing errors and pharmacist intervention at a teaching hospital in Saudi Arabia
712
Inpatient prescribing errors and pharmacist intervention at a teaching hospital in Saudi Arabia
713
Inpatient Psychiatric Nurses Need to Speak Up
714
Inpatient Psychiatric Nursing: Why Safety Must be the Key Deliverable
715
In-patient psychiatric referrals in a teaching hospital: A case controlled report
716
Inpatient Psychiatric Treatment: Should We Revive a Shrinking System?
717
Inpatient rehabilitation helps patients with multiple sclerosis
718
Inpatient satisfaction at tertiary care public hospitals of a metropolitan city of Pakistan
719
Inpatient self-management of bipolar disorder
720
Inpatient Service Use by Type of Health Coverage Scheme in South Korea: A Secondary Analysis of National Data
721
Inpatient smoking-cessation counseling and all-cause mortality among the elderly Original Research Article
722
Inpatient smoking-cessation counseling and all-cause mortality in patients with acute myocardial infarction
723
Inpatient treatment for eating disorders: Outcome at discharge and 3-month follow-up
724
Inpatient treatment in the psychiatric department of a German prison hospital
725
Inpatient treatment of major depression in Austria between 1989 and 2009: Impact of downsizing of psychiatric hospitals on admissions, suicide rates and outpatient psychiatric services
726
Inpatient treatment of mood disorders in the era of de-institutionalisation, depression awareness campaigns and development of new antidepressants
727
In-patient versus out-patient satisfaction : Gamotis, P.B., Dearman, V.C., Doolitle, N.O. and Price, S.C. (1988) A.O.R.N. Journal Vol. 47 No. 6 pp. 1421–1422, 1424–1425
728
Inpatient vs. Outpatient Management of Uncomplicated Preterm Premature Rupture of Membranes: A Clinical Trial
729
Inpatient/outpatient health care costs and remaining years of life—effect of decreasing mortality on future acute health care demand
730
Inpatients’ Perceptions of Physicians’ Empathy and Their Level of Satisfaction Regarding Medical Care Measured by Jefferson Scale of Patient’s Perceptions of Physician Empathy
731
IN-PATIENTS’ SATISFACTION IN THE MEDICAL AND SURGICAL WARDS – A COMPARISON BETWEEN ACCREDITED AND NON ACCREDITATED HOSPITAL IN THE STATE OF SELANGOR
732
Inpatriate managers: how to increase the probability of success
733
InP-based all-epitaxial 1.3-(mu)m VCSELs with selectively etched AlInAs apertures and Sb-based DBRs
734
InP-based double-heterostructure phototransistors with 135 GHz optical-gain cutoff frequency
735
InP-Based Passive Ring-Resonator-Coupled Lasers
736
InP-based photonic circuits: Comparison of monolithic integration techniques
737
InP-based wavelength tunable vertical cavity surface emitting laser structures
738
In-phantom characterisation studies at the Birmingham Accelerator-Generated epIthermal Neutron Source (BAGINS) BNCT facility
739
In-phantom dosimetry for the 13C(d,n)14N reaction as a source for acceleratorbased BNCT
740
In-phantom imaging of all dose components in boron neutron capture therapy by means of gel dosimeters
741
In-phantom response of LiF TLD-100 for dosimetry of 192Ir HDR source
742
In-phantom spectra and dose distributions from a high-energy neutron therapy beam
743
In-phantom spectra and dose distributions from a high-energy neutron therapy beam
744
In-phase and out-of-phase break-up of two immersed liquid threads under influence of surface tension
745
In-phase and out-of-phase modes stability analysis with LAPUR5 code for Kuosheng
746
In-Phase and Out-of-Phase Oscillations in BWRs: Impact of Azimuthal Asymmetry and Second Pair of Eigenvalues
747
In-phase anomalies in Beryllium-10 production and palaeomagnetic field behaviour during the Iceland Basin geomagnetic excursion
748
In-phase dynamics of the exhalation sequence in Popocatépetl volcano and slow-slip events in Cocos-North American plate boundary
749
In-phase implies large likelihood for independent codon model: distinguishing coding from non-coding sequences
750
In-phase step wandering on vicinal Si(1 1 1) surfaces
751
In-phase thermal–mechanical fatigue investigation on hollow single crystal turbine blades
752
INPI, the Internet and electronic commerce
753
In-pile and post-irradiation creep of type 304 stainless steel under different neutron spectra
754
In-pile creep rupture properties of ODS ferritic steel claddings
755
In-pile electrochemical measurements on AISI 304 and AISI 306 in PWR conditions – Experimental results
756
In-pile electrochemical measurements on AISI 316 L(N) IG and EUROFER 97 – I: experimental results
757
In-pile irradiation induced defects and the effect on thermal diffusivity of MgO
758
In-pile irradiation of rock-like oxide fuels
759
In-pile performance of a double-walled tube and a tritium permeation barrier
760
In-pile test of Li2TiO3 pebble bed with neutron pulse operation
761
In-pile testing of ITER first wall mock-ups at relevant thermal loading conditions
762
In-pile tritium permeation through F82H steel with and without a ceramic coating of Cr2O3–SiO2 including CrPO4
763
In-pile tritium release behaviour of lithiummetatitanate produced by extrusion–spheroidisation–sintering process in EXOTIC-9/1 in the high flux reactor, Petten
764
In-pile tritium-permeation measurements on T91 tubes with double walls or a Fe–Al/Al2O3 coating
765
In-pile Xe diffusion coefficient in UO2 determined from the modeling of intragranular bubble growth and destruction under irradiation
766
In-pipe inspection robot with active pipe-diameter adaptability and automatic tractive force adjusting
767
In-pixel variations of chl a fluorescence in the Northern Gulf of Mexico and their implications for calibrating remotely sensed chl a and other products
768
Inplace 2D matching in compressed images
769
In-place random list permutations
770
In-place reconstruction of version differences
771
In-place self-sorting fast Fourier transform algorithm with local memory references Original Research Article
772
In-place sorting with fewer moves
773
In-Place Stabilization of Pond Ash Deposits by Hydrated Lime Columns
774
In-Place Strength Evaluation of Existing Fixed Offshore Platform Located in Persian Gulf with Consideration of Soil-Pile Interactions
775
In-plane alignment of para-sexiphenyl films grown on KCl(0 0 1)
776
In-Plane Analysis of an FGP Plane Weakened by Multiple Moving Cracks
777
In-Plane Analysis of Masonry Infill Materials
778
In-Plane and Biaxial Performance of Seismic Precast Hollow Core Wall with Different Types of Energy Dissipators
779
In-plane and c-axis transport properties of FeCl3-GIC
780
In-plane and interlaminar shear strength of a unidirectional Hi-Nicalon fiber-reinforced celsian matrix composite
781
In-plane and out of plane free vibration in nano ultra-thin film using a general nonlocal Kirchhoff ultra-thin film model
782
In-Plane and out of Plane Free Vibration of U-Shaped AFM Probes Based on the Nonlocal Elasticity
783
In-plane and out-of-plane buckling of arches made of FGM
784
In-plane and out-of-plane buckling of arches made of FGM
785
In-plane and out-of-plane constraint effects under pressurized thermal shocks
786
In-plane and out-of-plane crack-tip constraint effects under biaxial nonlinear deformation
787
In-plane and out-of-plane displacement measurement by ultrasonic speckle correlation method (USCM)
788
In-plane and out-of-plane dynamics and buckling of functionally graded circular curved beams
789
In-plane and out-of-plane fracture toughness of physically aged polyesters as assessed by the essential work of fracture (EWF) method
790
In-plane and out-of-plane free vibration and stability of a curved rod in flow
791
In-plane and out-of-plane homogenisation of masonry
792
In-plane and out-of-plane motions of an extensible semi-circular pipe conveying fluid
793
In-plane and out-of-plane plasma resonances in optimally doped La1.84Sr0.16CuO4
794
In-plane and out-of-plane shape transitions of heteroepitaxially self-assembled nanostructures
795
In-plane and perpendicular magnetic fields dependence of cyclotron resonance in two-dimensional electron systems
796
In-plane and perpendicular tunneling through InAs quantum dots
797
In-plane and through-plane gas permeability of carbon fiber electrode backing layers
798
In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading
799
In-plane anisotropic deformation behavior of rolled Mg–3Al–1Zn alloy by initial {10–12} twins
800
In-plane anisotropic transport in the 2DEG with a strong spin–orbit coupling in In0.75Ga0.25As/In0.75Al0.25As hetero-junctions
801
In-plane anisotropy and coupling in Fe/Ag superlattices
802
In-plane anisotropy of photovoltaic effects in aligned polymer solar cells
803
In-plane anisotropy of the magnetic fluctuations in image Original Research Article
804
In-plane anisotropy of the upper critical field of λ-(BETS)2GaCl4
805
In-plane anisotropy of tunneling magnetoresistance and spin polarization in lateral spin injection devices with (Ga,Mn)As/GaAs spin-Esaki diode contacts
806
In-plane antisymmetric response of cables through bifurcation under symmetric sinusoidally time-varying load
807
In-plane Band Gaps in a Periodic Plate with Piezoelectric Patches
808
In-plane behavior of seismically damaged masonry walls repaired with external BFRP
809
In-Plane Biaxial Crush Response of Polycarbonate Honeycombs
810
In-plane biaxial crushing of honeycombs—: Part II: Analysis
811
In-plane boundary description method of the agglomerative structure of molybdenum organometallic precipitate
812
In-plane column response of metallic corrugated core sandwich panels
813
In-plane compression and shear performance of FRP bridge decks acting as top chord of bridge girders
814
In-plane compression of sandwich panels with debonds
815
In-plane compression porometry of battery separators
816
In-plane compression response of wire-woven metal cored sandwich panels
817
In-plane contributions to phase contrast in intermittent contact atomic force microscopy
818
In-plane contributions to phase contrast in intermittent contact atomic force microscopy
819
In-plane contributions to phase contrast in intermittent contact atomic force microscopy
820
In-plane corrugated cosine honeycomb for 1D morphing skin and its application on variable camber wing
821
Inplane crush response and energy absorption of circular cell honeycomb filled with elastomer
822
In-plane crushing and energy absorption performance of multi-layer regularly arranged circular honeycombs
823
In-plane crushing of a polycarbonate honeycomb
824
In-plane cyclic behaviour of a new reinforced masonry system: Experimental results
825
In-Plane Cyclic Response of Separated Masonry Infill Walls Using Polymeric Materials at the Surrounding Steel Frames Interface Using 3D FE Analysis
826
In-plane deformation of shape memory polymer sheets programmed using only scissors
827
In-plane directional mechanical properties of carbon fabric skins in sandwich structures after thermoforming
828
In-plane dynamic behavior of cable networks. Part 1: formulation and basic solutions
829
In-plane dynamic behavior of cable networks. Part 2: prototype prediction and validation
830
In-plane dynamic crushing of honeycomb. Part I: crush band initiation and wave trapping
831
In-plane dynamic crushing of honeycomb. Part I: crush band initiation and wave trapping
832
In-plane dynamic crushing of honeycomb. Part I: crush band initiation and wave trapping
833
In-plane dynamic crushing of honeycomb. Part II: application to impact
834
In-plane dynamic crushing of honeycomb. Part II: application to impact
835
In-plane dynamic crushing of honeycomb. Part II: application to impact
836
In-plane dynamic crushing of honeycombs—a finite element study
837
In-plane dynamic response analysis of curved pipe conveying fluid subjected to random excitation
838
In-plane dynamics of membranes having constant curvature
839
In-plane effect on out-of-plane capacity of separated infill wall
840
In-plane effect on out-of-plane capacity of separated infill wall
841
In-plane elastic buckling of hierarchical honeycomb materials
842
In-plane elastic buckling of pin-ended shallow parabolic arches
843
In-plane elastic constants and strengths of circular cell honeycombs
844
In-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs with dual imperfections
845
In-plane elastic moduli and plastic collapse strength of regular hexagonal honeycombs with dual imperfections
846
In-plane elastic moduli of covalently functionalized single-wall carbon nanotubes
847
In-plane elastic properties of hierarchical nano-honeycombs: The role of the surface effect
848
In-plane elastic response of two-segment circular-axis symmetric notch flexure hinges: The right circular design
849
In-plane electronic speckle pattern of interference (ESPI) with optical fibre system applied to the study of the human jaw
850
In-plane electrophoresis in nonpolar liquids: Measurements and simulations
851
In-plane flexure-based clamp
852
In-plane force–extension response of a polymer confined to a surface
853
In-plane fracture of an ice floe: A theoretical study on the splitting failure mode
854
In-plane fracture of laminated fiber reinforced composites with varying fracture resistance: Experimental observations and numerical crack propagation simulations
855
In-plane free vibration analysis of cable–arch structure
856
In-plane free vibration analysis of circular arches with varying cross-sections using differential quadrature method
857
In-plane free vibration analysis of combined ring-beam structural systems by wave propagation
858
In-plane free vibration and stability of loaded and shear-deformable circular arches
859
In-plane free vibration of a pre-stressed curved beam obtained from a large deflected cantilever beam
860
In-plane free vibration of circular annular disks
861
In-plane free vibration of functionally graded circular arches with temperature-dependent properties under thermal environment
862
In-plane free vibrations of single-layer and symmetrically laminated rectangular composite plates
863
In-plane GaN/AlGaN heterostructure fabricated by selective mass transport planar technology
864
In-plane gradients in fuel cell structure and conditions for higher performance
865
In-plane homoconjugation/homoaromaticity in preoriented 4N-anions—‘scope and limitations’
866
In-plane impact behavior of honeycomb structures filled with linearly arranged inclusions
867
In-plane impact behavior of honeycomb structures randomly filled with rigid inclusions
868
In-plane lattice spacing oscillatory behaviour during the two-dimensional hetero- and homoepitaxy of metals
869
In-plane lattice thermal conductivities of multilayer graphene films Original Research Article
870
In-plane loaded CFRP reinforced masonry walls: mechanical characteristics by homogenisation procedures
871
In-plane magnetic anisotropies in Ni/FeMn and Ni90Fe10/FeMn exchange biased bilayers Original Research Article
872
In-plane magnetic anisotropy induced in spin-sprayed Ni-Zn-Co ferrite films exhibiting strong magnetic loss at gigahertz range
873
In-plane magnetic field affected transverse vibration of embedded single-layer graphene sheets using equivalent nonlocal elasticity approach
874
In-plane magnetic field dependence of cyclotron resonance in two-dimensional electron system
875
In-plane magnetic field-dependent magnetoresistance of gated asymmetric double quantum wells
876
In-plane magnetic field-induced anisotropy and orientation energy of stripe phases at half-filled high Landau levels
877
In-plane magnetoresistance on the surface of topological insulator
878
In-plane mechanical and thermal conductivity properties of a rectangular–hexagonal honeycomb structure
879
In-plane mechanical behaviors of 2D repetitive frameworks with four-coordinate flexible joints and elbowed beam members
880
In-plane mechanical properties of elliptical cell honeycombs
881
In-plane mechanical, thermal and viscoelastic properties of a satin fabric carbon/epoxy composite
882
In-plane mesh regularization for node-based shape optimization problems
883
In-plane motion induced by an SH pulse at a frictional contact interface
884
In-plane neutron radiography for studying the influence of surface treatment and design of cathode flow fields in direct methanol fuel cells
885
In-plane numerical modelling of sterngthened perforated masonry walls using frp under cyclic loading
886
In-plane optical anisotropy of parabolic and half-parabolic Cd1−xMnxTe quantum wells
887
In-plane orbital moment anisotropy in fcc Fe0.65Ni0.35 ultrathin films grown on stepped Cu(1 1 1) surfaces
888
In-plane orbital moment anisotropy in fcc Fe0.65Ni0.35 ultrathin films grown on stepped Cu(1 1 1) surfaces
889
In-plane ordered grain boundaries inducing enhanced magnetoresistance in epitaxial manganite films
890
In-plane ordering of Li species in the interlayer of the turbostratic carbon as negative electrode for a high-power and long-life Li ion battery Original Research Article
891
In-plane oscillations of elastic rectangle on a layered viscoelastic half-space
892
In-plane perturbation of a system of two coplanar slit-cracks – I: Case of arbitrarily spaced crack fronts
893
In-plane perturbation of a system of two coplanar slit-cracks – II: Case of close inner crack fronts or distant outer ones
894
In-plane perturbation of the tunnel-crack under shear loading I: bifurcation and stability of the straight configuration of the front
895
In-plane perturbation of the tunnel-crack under shear loading II: Determination of the fundamental kerne
896
In-plane photoconductivity of InAs/GaAs strained-layer structures prepared on variously oriented GaAs substrates
897
In-plane photovoltaic and photoconductive effects on GalnAs and GaInNAs double quantum well structures
898
In-plane polarized collective modes in detwinned YBa2Cu3O6.95 observed by spectral ellipsometry
899
In-plane properties of composite laminates with through-thickness pin reinforcement
900
In-plane retrofitting of masonry panels with fibre reinforced composite materials
901
In-plane rotational and thickness-twist vibrations of polygonal plates and spherical shallow shells
902
In-plane seismic performance of unreinforced masonry walls strengthened with unbonded prestressed wire rope units
903
In-Plane Seismic Response of URM Walls Upgraded with FRP
904
In-plane shear behaviour of fibre composite sandwich beams using asymmetrical beam shear test
905
In-plane shear behaviour of traditional timber walls
906
In-plane shear performance of masonry panels strengthened with FRP
907
In-plane shear properties of cross-ply composite laminates with different off-axis angles
908
IN-PLANE SHEAR PROPERTIES OF RIBS FABRIC BY YARN PULL-OUT
909
In-plane shear reinforcement of wood beam floors with FRP
910
In-plane shear strength of a carbon/carbon composite at different loading rates and temperatures
911
In-plane shear testing of medium and high modulus woven graphite fiber reinforced/polyimide composites
912
In-plane shear testing of thick-section pultruded FRP composites using a modified Arcan fixture
913
In-Plane Shear-Axial Strain Coupling Formulation for ShearDeformable Composite Thin-Walled Beams
914
In-plane stability analysis of non-uniform cross-sectioned curved beams
915
In-plane stability of arches
916
In-Plane Stability of Parabolic Arches with Horizontal Spring Supports. I: Theory
917
In-Plane Stability of Parabolic Arches with Horizontal Spring Supports. II: Experiments
918
In-plane stability of preloaded shallow arches against dynamic snap-through accounting for rotational end restraints
919
In-plane stiffening techniques with nail plates or CFRP strips for timber floors in historical masonry buildings
920
In-plane stiffness of shear walls with openings
921
In-plane strain measurements on a microscopic scale by coupling digital image correlation and an in situ SEM technique
922
In-plane strength and design of fixed steel I-section arches
923
In-plane strength and design of parabolic arches
924
In-plane strengthening of clay brick unreinforced masonry wallettes using ECC shotcrete
925
In-plane stress analysis of an orthotropic plane containing multiple defects
926
Inplane stress singularities at the interface corner of a bimaterial junction
927
In-plane tensile performance of a cellular FRP bridge deck acting as top chord of continuous bridge girders
928
In-plane thermoelastic behaviour and buckling of pin-ended and fixed circular arches
929
In-plane transport effects on hydrogen depletion and carbon corrosion induced by anode flooding in proton exchange membrane fuel cells
930
In-plane tunnelling between one- and two-dimensional electron systems
931
In-plane ultimate compressive strengths of HPS deck panel system stiffened with U-shaped ribs
932
In-plane uniaxial stress study of a low dimensional organic metal
933
In-plane vibration analyses of circular arches by the generalized differential quadrature rule
934
In-plane vibration analyses of circular arches by the generalized differential quadrature rule
935
In-plane vibration analyses of circular arches by the generalized differential quadrature rule
936
In-plane vibration analyses of curved pipes conveying fluid using the generalized differential quadrature rule
937
In-plane Vibration Analysis of Symmetric Angle-ply Laminated Composite Arches
938
In-plane vibration and stability of shallow circular arches subjected to axial forces
939
In-plane vibration of laminated curved beams with variable curvature by dynamic stiffness analysis
940
In-plane vibration of plates with curvilinear plan-forms by a trigonometrically enriched curved triangular p-element
941
In-plane vibration of rectangular plates with periodic inhomogeneity: Natural frequencies and their adjustment
942
In-plane vibration of thin elliptic plates submitted to uniform pulsed microwave irradiations
943
In-plane vibrational analysis of rotating curved beam with elastically restrained root
944
In-plane vibrations of shear deformable curved beams
945
In-plane waves in an elastic solid containing a cracked slab region
946
In-plane X-ray diffraction and polarized NEXAFS spectroscopic studies on the organized molecular films of fluorinated amphiphiles with vinyl esters and their comb-polymers
947
In-plane/out-of-plane concentrated forces and moments on composite laminates with elliptical elastic inclusions
948
In-plane-aligned membranes of carbon nanotubes
949
In-plant control for water minimization and wastewater reuse: a case study in pasta plants of Alexandria Flour Mills and Bakeries Company, Egypt
950
In-plant optimization of a full-scale Jameson flotation cell
951
Inplenary and explenary radial facets in cladid crinoids
952
INP-MICON programme 1991–1992: Concentrations of PAHs and PCBs in total sediment
953
INP-MICON programme 1991–1992: Concentrations of PCBs and PAHs in dab muscle
954
INPOL – the Indiana University Neutron Polarimeter
955
INPOL – the Indiana University Neutron Polarimeter
956
In-port derivatization after sorptive extractions
957
In-port derivatization coupled to different extraction techniques for the determination of alkylphenols in environmental water samples
958
INPP5A/HLA-G1/IL-10/MMP-21 Axis in Progression of Esophageal Squamous Cell Carcinoma
959
INPRO economic assessment of the IRIS nuclear reactor for deployment in Brazil
960
In-process assessment of dental cutting of a leucite-reinforced glass–ceramic
961
In-process dressing of fine diamond wheels for tool grinding
962
In-process evaluation of grit protrusion feature for fine diamond grinding wheel by means of electro-contact discharge dressing
963
In-process high power CO2 laser beam position sensing
964
In-process high-speed photography applied to orthogonal turning
965
In-Process Identification of Material-Properties by Acoustic Emission Signals
966
In-process information storage on surfaces by turning operations
967
In-Process Investigation of Turning Process Applied with and without Cutting Fluid
968
In-process measurement of friction coefficient in orthogonal cutting
969
In-process modeling of dynamic tool-tip temperatures of a tunable vibration turning device operating at ultrasonic frequencies
970
In-process monitoring and detection of chip formation and chatter for CNC turning
971
In-process monitoring techniques for laser cleaning
972
In-process prediction of corner wear in drilling operations
973
In-process R&D: To capitalize or expense?
974
In-process roughness measurement on moving surfaces
975
In-process structuring of CrN coatings, and its influence on friction in dry and lubricated sliding
976
In-process surface recognition of a CNC milling machine using the fuzzy nets method
977
In-process tool wear estimation in milling using cutting force model
978
In-process vibrational spectroscopy and ultrasound measurements in polymer melt extrusion
979
In-process vibration-assisted high power Nd:YAG pulsed laser ceramic–metal composite cladding on Al-alloys
980
In-process wire electrical discharge dressing (IWEDD) of metal bonded diamond wheels
981
In-Production Product Value: A New Method for Part Type Prioritization
982
Input – Output Relationship in Cassava Production: Empirical Evidence among Cassava Farmers in Kogi State, Nigeria
983
Input / output stability of systems with switched dynamics and outputs
984
Input addition and leader selection for the controllability of graph-based systems
985
INPUT ADMITTANCES ARISING FROM EXPLICIT SOLUTIONS TO INTEGRAL EQUATIONS FOR INFINITE-LENGTH DIPOLE ANTENNAS
986
Input and biogeochemical transformation of dissolved carbon in the Siberian shelf seas
987
Input and dispersion of nutrients from the Jeddah Metropolitan Area, Red Sea
988
Input and first language acquisition: Evaluating the role of frequency
989
Input and output coupled nonlinear systems
990
Input and output mass flux correlations in an experimental braided stream. Implications on the dynamics of bed load transport
991
Input and output scaling and reordering for diagonal dominance and block diagonal dominance
992
Input and output substitution in higher education
993
Input and output technical efficiencies of wheat production in Kerman, Iran
994
Input and reverse transfer capacitance measurement of MOS-gated power transistors under high current flow
995
Input congestion, technical inefficiency and output reduction in fuzzy data envelopment analysis
996
Input constrained funnel control with applications to chemical reactor models
997
Input contracts, market structure and the empirical specification of price cost margins
998
Input control in a batch production system with lead times, due dates and random yields
999
Input coupling analysis and optimal design of a 3-DOF compliant micro-positioning stage
1000
Input current shaper based on the series connection of a voltage source and a loss-free resistor
بازگشت