<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Buckling behavior of a graphite/epoxy composite plate under parabolic variation of axial loads
2
Buckling behavior of a superconducting magnet coil
3
Buckling behavior of carbon nanotube-based intramolecular junctions under compression: Molecular dynamics simulation and finite element analysis
4
Buckling behavior of cold-formed zed-purlins partially restrained by steel sheeting
5
Buckling behavior of composite laminates with multiple delaminations under uniaxial compression
6
Buckling behavior of Composite Plates with Circular Embedded Delaminations under In-Plane Compressive loading
7
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression
8
Buckling behavior of compression-loaded composite cylindrical shells with reinforced cutouts
9
Buckling behavior of compression-loaded quasi-isotropic curved panels with a circular cutout
10
Buckling behavior of curved composite beams with different elastic response in tension and compression
11
Buckling behavior of fiber reinforced plastic–metal hybrid-composite beam
12
Buckling behavior of floating-roof steel tanks under measured differential settlement
13
Buckling Behavior of Functionally Graded Nano Clay-Reinforced Composite Beams
14
Buckling behavior of Kelvin open-cell foams under [0 0 1], [0 1 1] and [1 1 1] compressive loads
15
BUCKLING BEHAVIOR OF LONG ANISOTROPIC PLATES SUBJECTED TO RESTRAINED THERMAL EXPANSION AND MECHANICAL LOADS
16
Buckling Behavior of Nanocomposite Plates with Functionally Graded Properties under Compressive Loads in Elastic and Thermal Environments
17
Buckling Behavior of Semi-scale Steel Tank with Carbon Fiber Reinforced Polymer Ring Subjected to Lateral Uniform Pressure Loading
18
Buckling behavior of standing laminated Mindlin plates subjected to body force and vertical loading
19
Buckling behavior of stiffened laminated plates
20
Buckling behaviors and adhesion energy of nanostructured Cu/X (X = Nb, Zr) multilayer films on a compliant substrate
21
Buckling behaviors of laminated composite stepped flat columns
22
Buckling Behaviors of Symmetric and Antisymmetric Functionally Graded Beams
23
Buckling behaviour and delamination growth in impacted composite specimens under fatigue load: an experimental study
24
Buckling Behaviour of Aluminium Ball Jointed Single Layered Reticular Domes
25
Buckling behaviour of cold-formed channel sections under uniformly distributed loads
26
Buckling behaviour of composite shells
27
Buckling behaviour of imperfect spherical shells
28
Buckling behaviour of prestressed steel stayed columns with imperfections and stress limitation
29
Buckling behaviour of thin-walled regular polygonal tubes subjected to bending or torsion
30
Buckling capacities of axially loaded, cold-formed, built-up C-channels
31
Buckling capacity of welded stainless steel flanges by finite element analysis
32
Buckling characteristic of multi-laminated composite elliptical cylindrical shells
33
Buckling characteristics and layup optimization of long laminated composite cylindrical shells subjected to combined loads using lamination parameters
34
Buckling characteristics of cross-ply elliptical cylinders under axial compression
35
Buckling characteristics of pultruded glass fibre reinforced plastic columns under moment gradient
36
Buckling characteristics of smart skin structures
37
Buckling condensation in constrained growth
38
Buckling control using embedded shape memory actuators and the utilisation of smart technology in future aerospace platforms
39
Buckling delamination in compressed multilayers on curved substrates with accompanying ridge cracks
40
Buckling delamination of a rectangular plate containing a rectangular crack and made from elastic and viscoelastic composite materials
41
Buckling design of large circular steel silos subject to wind pressure
42
Buckling driven debonding in sandwich columns
43
Buckling enhancement of epoxy columns using embedded shape memory alloy spring actuators
44
Buckling equilibrium equations of arbitrarily loaded nonprismatic composite beams and the DQEM buckling analysis using EDQ
45
Buckling Experiments on Cone-Cylinder Intersections under Internal Pressure
46
Buckling experiments on damaged cylindrical shells
47
Buckling failure analysis of random composite laminates subjected to random loads
48
Buckling failure numerical analysis of HDPE pipes used for the trenchless rehabilitation of a reinforced concrete sewer
49
Buckling failure of an unusual braced steel frame supporting an electric dust-catcher
50
Buckling folds of a single layer embedded in matrix – Folding behavior revealed by numerical analysis
51
Buckling folds of a single layer embedded in matrix – Theoretical solutions and characteristics
52
Buckling forms of homogeneous and sandwich plates in pure shear in tangential directions
53
Buckling formulation for shear deformable thin-walled members—II. Finite element formulation
54
Buckling in response to applied heat sources
55
Buckling in the Iranian Patients with Knee Osteoarthritis: Its Frequency and Correlation with Physical Activities and Falling
56
Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds
57
Buckling initiation and displacement dependence in compression of vertically aligned carbon nanotube arrays Original Research Article
58
Buckling instabilities in coupled nano-layers
59
Buckling instabilities of octadecylamine functionalized carbon nanotubes embedded in epoxy
60
Buckling instabilities of subducted lithosphere beneath the transition zone
61
Buckling Instability of a Thick Rectangular Plate of a Composite Material with a Spatially Periodically Curved Structure
62
Buckling instability of double-wall carbon nanotubes conveying fluid
63
Buckling Instability of Sectional Noncircular Cylindrical Composite Shells under Axial Compression
64
Buckling instability of zinc oxide nanobelts under uniaxial compression investigated using molecular dynamics
65
Buckling interaction of slender plates—Experimental and numerical investigations
66
Buckling length of a steel column for fire design
67
Buckling life estimation of circular tubes under cyclic bending
68
Buckling limit diagrams (BLDs) of interstitial free steels (IFS): Comparison of experimental and finite element analysis
69
Buckling load analysis of grid stiffened composite cylinders
70
Buckling load of planar frames with semi-rigid joints using weighted symmetric graphs
71
Buckling load of seismic isolators affected by flexibility of reinforcement
72
Buckling load of symmetric plane frames using canonical forms
73
Buckling load relationship between Reddy and Kirchhoff circular plates
74
Buckling load relationship between Reddy and Kirchhoff plates of polygonal shape with simply supported edges
75
Buckling loads and eigenfrequencies of a braced beam resting on an elastic foundation
76
Buckling loads of CFRP composite cylinders under combined axial and torsion loading ¯ experiments and computations
77
Buckling loads of columns with constant volume
78
Buckling loads of tank shells with imperfections
79
Buckling loads of variable thickness thin isotropic plates
80
Buckling localization in a cylindrical panel under axial compression
81
Buckling mode decomposition of single-branched open cross-section members via finite strip method: Application and examples
82
Buckling mode decomposition of single-branched open cross-section members via finite strip method: Derivation
83
Buckling mode identification of perforated thin-walled members by using GBT and shell FEA
84
Buckling mode identification of thin-walled members by using cFSM base functions
85
Buckling mode localisation in randomly disordered continuous beams using a simplified model
86
Buckling mode localization in a multi-span periodic structure with a disorder in a single span
87
Buckling mode localization in elastic plates due to misplacement in the stiffener location
88
Buckling mode localization in nonhomogeneous beams on elastic foundations
89
Buckling mode localization in rib-stiffened plates with misplaced stiffeners – a finite strip approach
90
Buckling mode localization in rib-stiffened plates with misplaced stiffeners – Kantorovich approach
91
Buckling modeling of reinforcing bars with imperfections
92
Buckling modes identification from FEA of thin-walled members using only GBT cross-sectional deformation modes
93
Buckling of a coating strip of finite width bonded to elastic half-space
94
Buckling of a composite cantilever circular cylindrical shell subjected to uniform external lateral pressure
95
Buckling of a conical thin shell with variable thickness under a dynamic loading
96
Buckling of a functionally graded coating with an embedded crack bonded to a homogeneous substrate
97
Buckling of a heavy standing plate with top load
98
Buckling of a non-uniform, long cylindrical shell subjected to external hydrostatic pressure
99
Buckling of a pre-compressed or pre-stretched membrane in shear flow
100
Buckling of a sandwich composite cylindrical shell stiffened by rings under external pressure
101
Buckling of a stiff thin film on a compliant substrate in large deformation
102
Buckling of a thin elastic plate Original Research Article
103
Buckling of a thin-walled cylindrical shell with foam core under axial compression
104
Buckling of a Timoshenko beam on elastic foundation with uncertain input data
105
Buckling of a twisted and compressed rod
106
Buckling of a twisted and compressed rod supported by Cardan joints
107
Buckling of a uniformly compressed composite rectangular CCCC sandwich plate
108
Buckling of a uniformly compressed rectangular SSCF composite sandwich plate
109
Buckling of an elastic beam with added high-frequency excitation
110
Buckling of an internally hinged column with an elastic support
111
Buckling of an orthotropic graded coating with an embedded crack bonded to a homogeneous substrate
112
Buckling of anchored cylindrical shells of uniform thickness under wind load
113
Buckling of anisotropic sandwich panels containing holes: Part I - overall buckling
114
Buckling of anisotropic sandwich panels containing holes: Part II ¯ wrinkling
115
Buckling of arbitrary quadrilateral plates with intermediate supports using the Galerkin method Original Research Article
116
BUCKLING OF AUTOMATIC TRANSMISSION CLUTCH PLATES DUE TO THERMOELASTIC/PLASTIC RESIDUAL STRESSES
117
Buckling of axially compressed cylinders with imperfect length
118
Buckling of axially compressed thin cylindrical shells with functionally graded middle layer
119
Buckling of boron nitride nanotube reinforced piezoelectric polymeric composites subject to combined electro-thermo-mechanical loadings
120
Buckling of carbon nanotubes at high temperatures
121
Buckling of centerline-stiffened plates subjected to uniaxial eccentric compression
122
Buckling of circular plates with an internal ring support and elastically restrained edges
123
Buckling of circular steel silos subject to code-specified eccentric discharge pressures
124
Buckling of clamped orthotropic plate in shear
125
BUCKLING OF COLD-FORMED SECTIONS UNDER PURE AXIAL LOADS USING cFSM.
126
Buckling of Column with Base Attached to Elastic Half-Space
127
Buckling of Columns with Intermediate Elastic Restraint
128
Buckling of composite beams with two enveloped delaminations: Lower and upper bounds
129
Buckling of composite beams with two non-overlapping delaminations: Lower and upper bounds
130
Buckling of composite beams with two non-overlapping delaminations: Lower and upper bounds
131
BUCKLING OF COMPOSITE CYLINDRICAL SHELLS UNDER MECHANICAL AND THERMAL LOADS
132
Buckling of composite FRP structural plates using the complex finite strip method
133
Buckling of composite panels: A criterion for optimum stiffener design
134
Buckling of composite plate assemblies using higher order shear deformation theory—An exact method of solution
135
Buckling of composite plates by global–local plate theory
136
Buckling of composite shell structures using the spline finite strip method
137
Buckling of composite thin walled beams by refined theory
138
Buckling of compression-loaded multispan stiffened panel upon failure of joints between panel and supports
139
Buckling of conical composite shells
140
Buckling of Conventionally Sheathed Stud Walls
141
Buckling of core wall structures coupled with connecting beams
142
Buckling of cracked cylindrical thin shells under combined internal pressure and axial compression
143
Buckling of cracked functionally graded plates under tension
144
Buckling of cracked thin-plates under tension or compression
145
Buckling of cylindrical open-topped steel tanks under wind load
146
Buckling of cylindrical sandwich shells with metal foam cores
147
Buckling of cylindrical shells under static and dynamic shear loading
148
Buckling of cylindrical shells under transverse shear
149
Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure
150
Buckling of cylindrical shells with stepwise variable wall thickness under uniform external pressure
151
Buckling of Cylindrical Steel Shells with Random Imperfections due to Global Shear
152
Buckling of Cylindrical Tunnel Liners
153
Buckling of defective single-walled and double-walled carbon nanotubes under axial compression by molecular dynamics simulation
154
Buckling of delaminated bi-layer beam-columns
155
Buckling of Delaminated Composite Beams with Shear Deformation Effect
156
Buckling of Discretely Stringer-Stiffened Composite Cylindrical Shells under Combined Axial Compression and External Pressure
157
Buckling of Doubly Clamped Nano-Actuators in General form Through Spectral Meshless Radial Point Interpolation (SMRPI)
158
Buckling of elastic cylindrical shells considering the effect of localized axisymmetric imperfections
159
Buckling of elastically restrained non-uniform columns
160
Buckling of embedded multi-walled carbon nanotubes under combined torsion and axial loading
161
Buckling of extensible thermoelastic rods
162
Buckling of FGM cylindrical shells subjected to pure bending load
163
Buckling of FGM hybrid truncated conical shells subjected to hydrostatic pressure
164
Buckling of filament-wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications
165
Buckling of fixed-ended lean duplex stainless steel hollow columns of square, L-, T-, and +-shaped sections under pure axial compression—a finite element study
166
Buckling of fixed-roof aboveground oil storage tanks under heat induced by an external fire
167
Buckling of flat laminated glass panels under in-plane compression or shear
168
Buckling of folded plate structures subjected to partial in-plane edge loads by the FSDT meshfree Galerkin method
169
Buckling of functionalized single-walled nanotubes under axial compression Original Research Article
170
Buckling of Functionally Graded Beams with Rectangular and Annular Sections Subjected to Axial Compression
171
Buckling of functionally graded circular columns including shear deformation
172
Buckling of functionally graded conical panels under mechanical loads
173
Buckling of functionally graded stiffened and unstiffened plates using finite strip method
174
Buckling of GaN nanotubes under uniaxial compression
175
Buckling of geometrically imperfect cylindrical shells — definition of a buckling load
176
Buckling of GFRP Columns: An Empirical Approach to Design
177
Buckling of high natural slopes: The case of Lavini di Marco (Trento-Italy)
178
Buckling of imperfect functionally graded cylindrical shells under axial compression
179
Buckling of imperfect functionally graded plates under in-plane compressive loading
180
Buckling of imperfect laminated cylinders under hydrostatic pressure
181
BUCKLING OF INSULATED IRREGULAR TRANSITION FLUE GAS DUCTS UNDER AXIAL LOADING
182
Buckling of intermediate ring supported cylindrical shells under axial compression
183
Buckling of isotropic and orthotropic cylinders under induced moments Pages 191
184
Buckling of jets in electrospinning
185
Buckling of laminated composite shells under transverse load
186
Buckling of laminated composite stiffened panels subjected to in-plane shear: A parametric study
187
Buckling of laminated glass elements in out-of-plane bending
188
Buckling of laminated plates with general boundary conditions under combined compression, tension, and shear—A semi-analytical solution
189
Buckling of laminated sandwich plates subjected to partial edge compression
190
Buckling of laminated sandwich plates subjected to partial edge compression
191
Buckling of laminated sandwich plates subjected to partial edge compression
192
Buckling of Laminates with Multiple Through-the-Width Delaminations Using Spring Simulation Model
193
Buckling of Langmuir–Blodgett films of diacetylenes due to strain induced by polymerization
194
Buckling of long compression-loaded anisotropic plates restrained against inplane lateral and shear deformations
195
Buckling of Long Orthotropic Plates Including Higher-Order Transverse Shear
196
Buckling of long steel cylindrical shells subjected to external pressure
197
Buckling of metallic glass bars
198
Buckling of Micropiles
199
Buckling of moderately thick laminated cylindrical shells: a review
200
Buckling of moderately thick orthotropic columns: comparison of an elasticity solution with the Euler and Engesser/Haringx/Timoshenko formulae
201
Buckling of multi wall carbon nanotube cantilevers in the vicinity of graphite sheets using monotone positive method
202
Buckling of multiple delaminated beams
203
Buckling of multi-step cracked columns with shear deformation
204
Buckling of nano-fibre reinforced composites: a re-examination of elastic buckling
205
Buckling of nanotubes under compression considering surface effects
206
Buckling of non-uniform beams by a direct functional perturbation method
207
Buckling of optimised curved composite panels under shear and in-plane bending
208
Buckling of optimised flat composite plates under shear and in-plane bending
209
Buckling of Oriented Strand Board Webbed Wood I-Joists
210
Buckling of Oriented Strand Board Webbed Wood I-Joists
211
Buckling of orthotropic beam-plates with multiple central delaminations
212
Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics
213
Buckling of parabolic arches with hangers and tie
214
Buckling of peapods, fullerenes and nanotubes
215
Buckling of Piezoelectric Composite Cylindrical Shell Under Electro-thermo-mechanical Loading
216
Buckling of Piles under Liquefied Soil Conditions
217
Buckling of plate strip subjected to localised corrosion—a stochastic model
218
Buckling of plates with strengthenings
219
Buckling of plates with variable thickness—an analog equation solution
220
Buckling of Radially Loaded Concrete Cylinders in Fire Condition
221
Buckling of rectangular and hexagonal honeycomb under combined axial compression and transverse shear
222
Buckling of rectangular plates subjected to nonlinearly distributed in-plane loading
223
Buckling of rectangular plates with various boundary conditions loaded by non-uniform inplane loads
224
Buckling of rectangular plates with various boundary conditions loaded by non-uniform inplane loads
225
Buckling of reticulated laminated veneer lumber shells in consideration of the creep
226
Buckling of sandwich beams with compliant interfaces
227
Buckling of sandwich columns reinforced by triaxial weave fabric composite skin-sheets
228
Buckling of sandwich columns reinforced by triaxial weave fabric composite skin-sheets
229
Buckling of sandwich panels with a flexible core—high-order theory
230
Buckling of sandwich wide columns
231
Buckling of shallow spherical shells including the effects of transverse shear deformation
232
Buckling of shallow spherical shells including the effects of transverse shear deformation
233
Buckling of shallow spherical shells including the effects of transverse shear deformation
234
Buckling of shear deformable thin-walled members—I. Variational principle and analyticalsolutions
235
Buckling of Sheet Metals in Contact with Tool Surfaces
236
buckling of shell panels made of fiberglass and reinforced with an orthogonal grid of stiffeners
237
Buckling of short beams with warping effect included
238
Buckling of simply supported rectangular plates under combined bending and compression using eigensensitivity analysis
239
Buckling of Simply Supported Rectangular Reissner-Mindlin Plates Subjected to Linearly Varying In-Plane Loading
240
Buckling of Skew Plates with Continuity or Rotational Edge Restraint
241
Buckling of slender prismatic columns with multiple edge cracks using energy approach
242
Buckling of softening columns in a continuum damage mechanics perspective – Local versus non-local formulation
243
Buckling of some isotropic, intrinsically curved elasticas induced by a terminal twist Original Research Article
244
Buckling of spherical cap gridshells: A numerical and analytical study revisiting the concept of the equivalent continuum
245
Buckling of spontaneously twisted ribbons
246
Buckling of stainless steel columns and beams in fire
247
Buckling of steel bars with Lüders bands
248
Buckling of stepped composite columns
249
Buckling of Stiffened Thin-Walled Cylindrical Shells under Axial Compression with Symmetrical Imperfections
250
Buckling of stochastically heterogeneous beams, using a functional perturbation method
251
Buckling of stretched strips
252
Buckling of super ellipsoidal shells under uniform pressure
253
Buckling of symmetric cross-ply square plates with various boundary conditions
254
Buckling of symmetrical cross-ply composite rectangular plates under a linearly varying in-plane load
255
Buckling of symmetrically laminated rectangular plates under parabolic edge compressions
256
Buckling of symmetrically laminated rectangular plates under parabolic edge compressions
257
Buckling of symmetrically laminated rectangular plates with general boundary conditions – A semi analytical approach
258
Buckling of tension-loaded thin-walled composite plates with cut-outs
259
Buckling of the axially compressed cylindrical shells with arbitrary axisymmetric thickness variation
260
Buckling of the CCFF orthotropic rectangular plates under in-plane pure bending
261
Buckling of the composite laminates containing through-the-width delaminations using different plate theories
262
Buckling of the composite orthotropic clamped–clamped cylindrical shell loaded by transverse inertia forces
263
Buckling of the SSCF rectangular orthotropic plate subjected to linearly varying in-plane loading
264
Buckling of the SS–C–SS–C symmetrical composite rectangular plate under linear-varying in-plane load
265
Buckling of the SSFF rectangular orthotropic plate under in-plane pure bending
266
Buckling of thick functionally graded plates under mechanical and thermal loads
267
Buckling of thin and moderately thick anisotropic cylinders under combined torsion and axial compression
268
Buckling of thin cylindrical shells under axial compression
269
Buckling of thin cylindrical shells: an attempt to resolve a paradox
270
Buckling of thin cylindrical shells: an attempt to resolve a paradox
271
Buckling of thin cylindrical shells: an attempt to resolve a paradox
272
Buckling of thin plates and members — and early work on rectangular tubes
273
Buckling of thin-walled composite structures with intermediate stiffeners
274
Buckling of thin-walled compression members with shear lag using spline finite member element method
275
Buckling of thin-walled conical shells under uniform external pressure
276
Buckling of three-layered composite beams with viscoelastic interaction
277
Buckling of tube-like shells filled with other material under uniform axial compression
278
Buckling of tubular strings in curved wells
279
Buckling of unilaterally constrained plates: Applications to the study of delaminations in layered structures
280
Buckling of Vertical Cylindrical Shells Under Combined End Pressure and Body Force
281
Buckling of vertical rod loaded by dead weight and tensile force subjected to its top end (applied to marine vertical oil pipelines—Risers)
282
Buckling of vertical sandwich cylinders embedded in soil
283
Buckling of very slender metal silos under eccentric discharge
284
Buckling of woven GFRP cylinders under concentric and eccentric compression
285
Buckling of woven GFRP cylinders under concentric and eccentric compression
286
Buckling of ZnS-filled single-walled carbon nanotubes – The influence of aspect ratio
287
Buckling optimization and antioptimization of composite plates: uncertain loading combinations
288
Buckling optimization of composite laminated adaptive structures
289
Buckling optimization of elastic IPE and circular sections columns considering boundry condition effects
290
Buckling optimization of flexible columns
291
Buckling optimization of laminated cylindrical panels subjected to axial compressive load
292
Buckling optimization of plates with variable thickness subjected to nonuniform uncertain loads
293
Buckling optimization of variable thickness prismatic folded plates
294
Buckling patterns of complete spherical shells filled with an elastic medium under external pressure
295
Buckling patterns of complete spherical shells filled with an elastic medium under external pressure
296
Buckling phenomena related to rolling and levelling of sheet metal
297
Buckling phenomena related to rolling and levelling of sheet metal
298
Buckling phenomena related to rolling and levelling of sheet metal
299
BUCKLING PRESSURE IN DOUBLE WALL CRYOGENIC STORAGE TANK BY FEM
300
Buckling pressure of “pumpkin” balloons
301
Buckling Response and Elastic Stiffness of Butterfly Dampers
302
Buckling response of glue-laminated columns reinforced with fiber-reinforced plastic sheets
303
Buckling restrained braces as structural fuses for the seismic retrofit of reinforced concrete bridge bents
304
Buckling sensitivity analysis of cracked thin plates under membrane tension or compression loading Original Research Article
305
Buckling sensitivity of a connecting rod to the shank sectional area reduction
306
Buckling stability of multilayer plates and shells with interfacial structural defects under axial compression
307
Buckling strength analysis of adhesively bonded aluminum hat sections
308
Buckling strength analysis of the web of a WCW H-beam: Part 2.: Development and research on H-beams with wholly corrugated webs (WCW)
309
Buckling strength assessment of corrugated panels in offshore structures
310
Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures
311
Buckling strength of cylindrical steel tanks under harmonic settlement
312
Buckling strength of GFRP under-water vehicles
313
Buckling Strength of Near-Cylindrical Shells
314
Buckling strength of slender circular tubular steel braces strengthened by CFRP
315
Buckling strength of steel plating with elastically restrained edges
316
Buckling strength of the cylindrical shell and tank subjected to axially compressive loads
317
Buckling strength of thin-shell concrete arch dams
318
Buckling tests on steel plates restrained at discrete points in the retrofit of reinforced concrete beams
319
Buckling topology optimization of laminated multi-material composite shell structures
320
Buckling transition of axially impacted open shells
321
Buckling under the external pressure of cylindrical shells with variable thickness
322
Buckling, collapse and failure analysis of FRP sandwich panels
323
Buckling, flutter and vibration analyses of beams by integral equation formulations
324
Buckling, post-buckling and delamination propagation in debonded composite laminates Part 2: Numerical applications
325
Buckling, post-buckling and delamination propagation in debonded composite laminates: Part 1: Theoretical development
326
Buckling, postbuckling and imperfection-sensitivity: Old questions and some new answers
327
Buckling, strength and failure mechanics of thin-walled structures
328
Buckling-delamination and cracking of thin titanium films under compression: Experimental and numerical studies
329
Buckling-induced dislocation emission in thin films on substrates
330
Buckminsterfullerene C60: a chemical Faraday cage for atomic nitrogen
331
Buckminsterfullerene derivatives bearing a fluoroalkyl group for use in organic photovoltaic cells
332
Buckwheat (Fagopyrum esculentum Moench) low molecular weight seed proteins are restricted to the embryo and are not detectable in the endosperm
333
Buckwheat achenes antioxidant profile modulates Aspergillus flavus growth and aflatoxin production
334
Buckwheat honeys: Screening of composition and properties
335
Buckwheat Rutin Inhibits AngII-induced Cardiomyocyte Hypertrophy via Blockade of CaN-dependent Signal Pathway
336
Buckwheat trypsin inhibitor enters Hep G2 cells by clathrin-dependent endocytosis
337
Bucky diamond produced by annealing nanodiamond as a support of Pt electrocatalyst for methanol electrooxidation
338
Bucky ferrocene and ruthenocene: serendipity and discoveries
339
Bucky paper with improved mechanical stability made from vertically aligned carbon nanotubes for desulfurization process Original Research Article
340
Bucky shuttle memory system based on boron-nitride nanopeapod
341
Bucky-gel coated glassy carbon electrodes, for voltammetric detection of femtomolar leveled lead ions
342
Buckypaper fabrication by liberation of electrophoretically deposited carbon nanotubes Original Research Article
343
Buckypaperbased catalytic electrode containing graphene nanoplates and ZrO2 nanorod composite to improve PEMFC performance
344
Bucolic visions of rural America
345
BuCy RAFs drive cells into MEK addiction
346
Buda–Lund hydro model for ellipsoidally symmetric fireballs and the elliptic flow at RHIC Original Research Article
347
Budapest and New York: Studies in metropolitan transformation 1870–1930 : and (Eds), (New York: Russell Sage Foundation, 1994. Pp. xiv+400.$39.95)
348
budapest Postgraduate training in refugee medicine is launched
349
BUDAYA BERBAHASA MENURUT PERSPEKTIF ISLAM
350
Budaya Berpikir Positif sebagai Modal Utama Harmoni Sosial dan Integrasi Bangsa
351
BUDAYA DAN PERDAMAIAN : HARMONI DALAM KEARIFAN LOKAL MASYARAKAT JAWA MENGHADAPI PERUBAHAN PASCA GEMPA
352
Budaya Hedonisme dan Cabarannya Terhadap Pembangunan Tamadun Ummah
353
Budaya Kota dan Nilai Tradisi Masyarakat Indonesia pada Mobil Keluarga
354
Budaya Organisasi dan Komitmen Guru Dalam Pelaksanaan Pengurusan Kualiti Menyeluruh di Sekolah-sekolah Menengah Zon Bukit Mertajam
355
BUDAYA ORGANISASI ISLAM HOLISTIK: KEPERLUAN MASA DEPAN ORANG MELAYU DAN BANGSA MALAYSIA
356
Budaya Penjara: Arena Sosial Semi Otonom di Lembaga Pemasyarakatan “X”
357
Budaya Penyelidikan Dan Penerbitan Bertamadun: Satu Sinergi
358
BUDAYA POPULAR DAN KOMUNIKASI: IMPAK KUMPULAN SLANK TERHADAP SLANKERS DI INDONESIA
359
Budaya sekolah: Implikasi terhadap proses pembelajaran secara mengalami
360
Budburst phenology of white birch in industrially polluted areas
361
Budd Chiari Syndrome associated with angiomyolipoma of the liver
362
Budd-Chiari syndrome and activated protein C resistance
363
Budd-Chiari syndrome and factor V Leiden mutation
364
Budd-Chiari syndrome and portal vein thrombosis due to right atrial myxoma
365
Budd-Chiari syndrome associated with hyperthyroidism
366
Budd-Chiari syndrome likely related to a slimming drug preparation
367
Budd–Chiari syndrome: a review by an expert panel
368
Budd-Chiari syndrome: combination of genetic defects and the use of oral contraceptives leading to hypercoagulability
369
Buddhism and acceptance and commitment therapy Original Research Article
370
Buddhist and Muslim Interaction in the Post-War of Sri Lanka
371
Buddhist Group Therapy for Diabetes Patients With Depressive Symptoms
372
Buddhist philosophy and the treatment of addictive behavior Original Research Article
373
Buddhist Religious Education in the Context of Modern Russian Policy of Multicultural Education: A Case of the Republic of Buryatia
374
Budding and secretion of HIV Gag–Env virus-like particles from recombinant human adenovirus infected cells
375
Budding events in herpesvirus morphogenesis
376
Budding of alphaviruses
377
Budding of giant unilamellar vesicles induced by an amphitropic protein β2-glycoprotein I Original Research Article
378
Budding of Walnut ( Juglans regiaL.)
379
Buddy wire technique for stent placement at non-aorto ostial coronary lesions
380
Buddy-finding in the mobile environment
381
Budesonide and Calcitriol Synergistically Inhibit Airway Remodeling in Asthmatic Mice
382
Budesonide plus formoterol for reliever therapy in asthma
383
Budesonide quantification by HPLC coupled to atmospheric pressure photoionization (APPI) tandem mass spectrometry. Application to a comparative systemic bioavailability of two budesonide formulations in healthy volunteers
384
Budesonide Solubility in 2-Propanol+ Water Mixtures at T = (293.2 to 313.2) K: Experimental Measurement, Thermodynamic Analysis and Mathematical Modeling
385
Budget allocation as a measure of potential demand
386
Budget Allocation for Thermodynamic and Mechanical Projects of an Organization
387
Budget and Planning
388
Budget and Schedule Success for Small Capital-Facility Projects
389
Budget calculations of nitrogen, phosphorus and BOD5 passing through the Oder estuary
390
Budget constrained energy conservation-an experience with a textile industry
391
Budget constrained location problem with opening and closing of facilities
392
Budget constrained planning to optimize power system reliability
393
Budget constrained run orders in optimum design
394
Budget constraints that are not soft
395
Budget deficit persistence and the twin deficits hypothesis
396
Budget Deficits and Current Account Deficits in the Philippines: A Casual Relationship?
397
BUDGET DEFICITS AND INTEREST RATES: AN EMPIRICAL ANALYSIS FOR PAKISTAN
398
Budget deficits, inflation risk, and asset prices
399
Budget Discussions Allocated to the Gendarmerie According to the Records of the First Assembly
400
Budget effects of health care ‘vouchersʹ
401
Budget effects of health care vouchers
402
Budget effects of health care vouchers
403
Budget fight shuts down US government
404
Budget hotels: not just minor hospitality products
405
Budget impact analysis of vaccination against Haemophilus influenzae type b as a part of a Pentavalent vaccine in the childhood immunization schedule of Iran
406
Budget Impact of Introducing Linagliptin into Bosnia and Herzegovina Health Insurance Drug Reimbursement List in 2016-2018
407
Budget institutions and fiscal performance in Latin America
408
Budget institutions and political insulation: why states adopt the item veto
409
Budget negotiations in multi-period settings
410
Budget of NOy species measured at a coastal site
411
Budget participation, goal interdependence and controversy: a study of a Chinese public utility
412
Budget processes and commitment to fiscal discipline
413
Budget processes: Theory and experimental evidence
414
Budget referendums and government spending: evidence from Swiss cantons
415
Budgetary allocations and efficiency in the human resources policy of a university following multiple criteria
416
Budgetary and Efficiency Effects of Housing Taxation in the United States
417
Budgetary Constraints and Idle Time Allocation in Common-Cycle Production with non-zero Setup Time
418
Budgetary control and the labour force: Findings from a survey of large British companies
419
Budgetary criteria in performance evaluation: a critical appraisal using new evidence
420
Budgetary earmarking and the control of the extravagant woman in Australia, 1850–1920
421
Budgetary incrementalism in a Christian bureaucracy
422
Budgetary participation and managerial performance: The impact of information and environmental volatility
423
Budgetary process in uncertain contexts: a study of state-owned enterprises in Bangladesh
424
Budgetary support for police services in U.S. municipalities: Comparing political culture, socioeconomic characteristics and incrementalism as rival explanations for budget share allocation to police
425
Budget-Balancing Incentive Mechanisms
426
Budget-constrained search
427
Budget-Emphasis in Performance Evaluation and Managers’ Job Related Tension: the Moderating Effect of Information Completeness
428
Budgeting and standard costing practices in New Zealand and the United Kingdom
429
Budgeting for food on a low income in the UK: the case of lone-parent families
430
Budgeting for information technology
431
Budgeting for library resources in colleges of education: Some findings from Botswana
432
Budgeting for Library Technical Services in an Electronic Age
433
Budgeting in a not-for-profit setting: A fund-raising simulation with multiple objectives
434
Budgeting with bounded multiple-choice constraints
435
Budgetʹs blow to the Medical Research Council
436
Budgets for fine-grained sediment in the Danish Wadden Sea
437
Budgets for root-derived C and litter-derived C: comparison between conventional tillage and no tillage soils
438
Budgets for root-derived C and litter-derived C: comparison between conventional tillage and no tillage soils
439
Budgets of Mn, Cd and Cu in the macrotidal Gironde estuary (SW France)
440
Budgets, pricing policies and user fees in Canadian parksʹ tourism
441
Budgets: a medium of organizational transformation
442
Budhraja: beef up reliability
443
Budi Iman Santoso Assessment (BISA): a model for predicting levator ani injury after vaginal delivery
444
Buecknerʹs work conjugate integrals and weight functions for a crack in anisotropic solids
445
Buehler becomes Gabriel Chemie Deutschland
446
Buekenhout unitals Original Research Article
447
Buen Vivir (living well) in Ecuador: Community and environmental satisfaction without household material prosperity?
448
Buen vivir: Emergent discourse within or beyond sustainable development?
449
buenos aires Bolivian soldiers double up as health workers
450
buenos aires Doctor accused in Argentine grandmothersʹ crusade
451
buenos aires How Argentina benefited from a cholera epidemic
452
buenos aires Human rights give way to civil rights in Argentina
453
buenos aires New twist to Argentinaʹs health-care crisis
454
Buenos aires: Global dream, local crises : David J Keeling Wiley Chichester (1996) 256 pp £35.00 hardback
455
Buerger s disease: a case report
456
Buerger’s Disease in Tehran University of Medical Sciences Hospitals: A Fifteen Years Study
457
Buergerʹs disease at the ‘San Juan De Diosʹ Hospital, Santa Fe De Bogota, Colombia
458
Buergerʹs disease with intestinal involvement
459
Buffalo (Bubalus bubalis) Fetal Skin Derived Fibroblast Cells Exhibit Characteristics of Stem Cells
460
Buffalo meat as a salted and cured product
461
Buffalo vs. cow milk fat globules: Size distribution, zeta-potential, compositions in total fatty acids and in polar lipids from the milk fat globule membrane
462
Buffalo wings and Brussels sprouts. Food, football and the rhetoric of healthy super bowl snacks
463
Buffelgrass (Pennisetum ciliare) land conversion and productivity in the plains of Sonora, Mexico Original Research Article
464
Buffer allocation for an integer nonlinear network design problem
465
Buffer allocation in flow-shop-type production systems with general arrival and service patterns
466
Buffer allocation in general single-server queueing networks
467
Buffer allocation in serial production lines with preventive and corrective maintenance operations
468
Buffer allocation in unreliable production lines using a knowledge based system
469
Buffer allocation plan for a remanufacturing cell
470
Buffer and sugar concentration dependent fluorescence response of a BODIPY-based aryl monoboronic acid sensor
471
Buffer behavior of brucite in removing copper from acidic solution
472
Buffer composition suitable for determining very low fluoride concentrations using a fluoride ion-selective electrode and its application to the continuous analysis of rain water
473
Buffer content of a leaky-bucket system with long-range dependent input traffic.
474
Buffer contents and cell delay in a rate adaptation buffer with Markovian arrivals
475
Buffer delay change in the presence of power and ground noise
476
Buffer design for nitrogen polarity GaN on sapphire image by RF-MBE and application to the nanostructure formation using KOH etching
477
Buffer effects on the zeta potential of ultrafiltration membranes
478
Buffer enhanced bioluminescence resonance energy transfer sensor based on Gaussia luciferase for in vitro detection of protease Original Research Article
479
Buffer enhanced bioluminescence resonance energy transfer sensor based on Gaussia luciferase for in vitro detection of protease Original Research Article
480
Buffer evaluation in variable bandwidth channelization for videos
481
Buffer gas cooling of ion beams
482
Buffer gas cooling of ion beams
483
Buffer gas optimization in CO2 laser ablation for structure control of single-wall carbon nanohorn aggregates Original Research Article
484
Buffer insertion with adaptive blockage avoidance
485
Buffer interactions: Solubilities and transfer free energies of TRIS, TAPS, TAPSO, and TABS from water to aqueous ethanol solutions
486
Buffer layer dependence of magnetic anisotropy in Fe films grown GaAs substrate
487
Buffer layer effect in nanostructured tin electrodeposition on insulating and conducting substrates
488
Buffer layer effect on ZnO nanorods growth alignment
489
Buffer layer free graphene on SiC(0 0 0 1) via interface oxidation in water vapor
490
Buffer layer influence on guiding properties of oxidized porous silicon waveguides
491
Buffer layers for Tl-2212 thin films on MgO and sapphire substrates
492
Buffer management control in data transport network node
493
Buffer minimization in pass transistor logic
494
Buffer overflow asymptotics for multiplexed regulated traffic
495
Buffer performance modeling in the context of unclustered index accesses with non-uniform access pattern
496
Buffer queries
497
Buffer requirements for enhanced hydrogen production in acidogenic digestion of food wastes
498
Buffer scheme with battery energy storage capability for enhancement of network transient stability and load ride-through
499
Buffer size optimization in asynchronous assembly systems using genetic algorithms
500
Buffer sizing in multi-product multi-reactor batch processes: Impact of allocation and campaign sizing policies
501
Buffer sizing models for end-of-aisle order picking systems
502
Buffer sizing models for end-of-aisle order picking systems
503
Buffer standards for the physiological pH of N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (BES) from (278.15 to 328.15) K
504
Buffer stock saving in retirement accounts
505
Buffer stock saving in retirement accounts$
506
Buffer stocks and precautionary savings with loss aversion
507
Buffer storage for direct steam generation
508
Buffer system for the separation of neutral and charged small molecules using micellar electrokinetic chromatography with mass spectrometric detection
509
Buffer transport in hydroxyethyl methacrylate copolymer irradiated by γ-rays
510
Buffer tree synthesis with consideration of temporal locality, sink polarity requirements, solution cost, congestion, and blockages
511
Buffer Zone Concept and it’s Potential Implementation in TasekBera
512
Buffer Zone versus Whole Catchment Approaches to Studying Land Use Impact on River Water Quality
513
Buffer Zones for Reducing Pesticide Drift to Ditches and Risks to Aquatic Organisms
514
Buffer-driven adaptive video streaming with TCP-friendliness
515
Buffered DDA command generation in a CNC
516
Buffer-free Cu(In,Ga)Se2-solar cells by near-surface ion implantation
517
Buffer-free production of gamma-aminobutyric acid using an engineered glutamate decarboxylase from Escherichia coli
518
Buffer-induced, selective mono-C-alkylation of phloroglucinol: application to the synthesis of an advanced intermediate of catechin
519
Buffering against weight gain following dieting setbacks: An implicit theory intervention
520
Buffering and ion-release by a glass-ionomer cement under near-neutral and acidic conditions
521
Buffering and nutrient effects of white mud from ammonia–soda process on thermophilic hydrogen fermentation from food waste
522
Buffering capacity through cation leaching of Pinus radiata D. Don canopy
523
Buffering colour fluctuation of purple sweet potato anthocyanins to acidity variation by surfactants
524
Buffering effect of chicken skin and meat protects Salmonella enterica strains against hydrochloric acid but not organic acid treatment
525
Buffering external threats to heritage conservation areas: a plannerʹs perspective
526
Buffering from secondary minerals as a migration limiting factor in lead polluted soils at historical smelting sites
527
Buffering in Models of Integrated Biochemical Systems
528
Buffering intermittent renewable power with hydroelectric generation: A case study in California
529
Buffering of Acidic Mine Lakes: The Relevance of Surface Exchange , Solid- Bound Sulphate
530
Buffering of recovery from acidification by organic acids
531
Buffering processes in a boreal dissolved organic carbon-rich stream during experimental acidification
532
Buffering: a Possible Passive-homeostasis Role for Redundant DNA
533
Buffering-based approach to fluctuation analysis of glacier calving fronts using LANDSAT-7 ETM+, with a case study of Jakobshavn Isbrو
534
Buffer-layer enhanced crystal growth of BaB6 (1 0 0) thin films on MgO (1 0 0) substrates by laser molecular beam epitaxy
535
Buffer-layer-assisted nanostructure growth via two-dimensional cluster–cluster aggregation
536
Buffer-less Cu(In,Ga)Se2 solar cells by band offset control using novel transparent electrode
537
Buffer-mediated activation of Candida antarctica lipase B dissolved in hydroxyl-functionalized ionic liquids
538
Buffers for biomass production in temperate European agriculture: A review and synthesis on function, ecosystem services and implementation
539
Buffers of Peer Rejection Among Girls With andWithout ADHD: The Role of PopularityWith Adults and Goal-Directed Solitary Play
540
Buffers of Peer Rejection Among Girls With andWithout ADHD: The Role of PopularityWith Adults and Goal-Directed Solitary Play
541
Buffers, barriers and blankets: The (dis)connectivity of catchment-scale sediment cascades
542
Buffet and buffeting control in transonic flow
543
Buffeting at the Leading-Edge of a Flat Plate Due to a Streamwise Vortex: Flow Structure and Surface Pressure Loading
544
Buffeting for 2D and 3D sharp-edged bluff bodies
545
Buffeting lift forces and local air–water flow aspects around a rigid cylinder
546
Buffeting of large telescopes: Wind-tunnel measurements of the flow inside a generic enclosure
547
Buffeting of two-dimensional bluff bodies
548
Buffeting of two-dimensional bluff bodies
549
Buffeting response of long-span cable-supported bridges under skew winds. Part 1: theory
550
Buffeting response of long-span cable-supported bridges under skew winds. Part 2: case study
551
Buffeting-induced fatigue damage assessment of a long suspension bridge
552
Buffon got it straight
553
Bufo viridis secretions improve anxiety and depression-like behavior following intracerebroventricular injection of amyloid β
554
Bug localization using latent Dirichlet allocation
555
Bugbuster—survivability of living bacteria upon shock compression
556
Bug-fixing and code-writing: The private provision of open source software
557
Bugging cancer with COBALT
558
Bugs and the gut: an unstable marriage
559
Bugs in odometry
560
Bugs in vision
561
Bugʹs life
562
BUGS ON A BUDGET DISTRIBUTED SENSING WITH COST FOR REPORTING AND NONREPORTING
563
Bugs on Drugs Go GAGAA
564
Bugs with a backpack: the function of nymphal camouflage in the West African assassin bugs Paredocla andAcanthaspis spp.
565
Bui Phu HUNG, Vien TRUONG, Ngoc Vu NGUYENStudents' Responses to CL-Based Teaching of English Prepositions 10.14689/ejer.2018.73.3
566
Build a Great Team: One Year to Success, by Catherine Hakala-Ausperk. Chicago, IL: ALA Editions, 2013. 286 p. $52.00. ISBN 9780838911709.
567
Build direction dependence of microstructure and high-temperature tensile property of Co–Cr–Mo alloy fabricated by electron beam melting
568
Build Electronic Arabic Lexicon
569
Build grid-enabled large-scale collaboration environment in e-Learning grid
570
Build shape-shifting tries for fast IP lookup in O(n) time
571
Build to order supply chains in developed and developing countries
572
Build up of patches caused by Rhizoctonia solani
573
Build up of patches caused by Rhizoctonia solani
574
Build versus Buy
575
Build your own change model
576
Buildability Attributes at Design Phase in Malaysian Building Construction
577
Buildability Factors that Influence Micro-Level Formwork Labour Productivity of Beams in Building Floors
578
Build-a-Person Technique: An examination of the validity of human-figure features as evidence of childhood sexual abuse
579
Building "boring" rides and shows
580
Building 2-D stratigraphic and structure models from well log data and control horizons
581
Building 3D model of the mobile object using image pair
582
Building 3D solid models of sedimentary stratigraphic systems from borehole data: An automatic method and case studies
583
Building 3D sulcal models using local geometry
584
Building 3-D Visual Perception of a Mobile Robot Employing Extended Kalman Filter
585
Building a `quasi optimalʹ neural network to solve the short-term load forecasting problem
586
Building a “better” mousetrap
587
Building A 3D Geological model Using Petrel Software for Asmari Reservoir, South Eastern Iraq
588
Building a Balanced Scorecard for a burn center
589
Building a bankable solar radiation dataset
590
Building a better baby: embodied models of infant cognition
591
Building a better future: An exploration of beliefs about climate change and perceived need for adaptation within the building industry
592
Building a better ovitrap for detecting Aedes aegypti oviposition
593
Building a better PHR paradigm: Lessons from the discontinuation of Google Health™
594
Building a better virus trap
595
Building a binary outranking relation in uncertain, imprecise and multi-experts contexts: The application of evidence theory Original Research Article
596
Building a body of evidence
597
Building a bridge for nursing education and clinical care in Taiwan — Using action research and Confucian tradition to close the gap
598
Building a CAL Expert System based upon Two-phase Knowledge Acquisition
599
Building a case for the hydrogen economy
600
Building a case-based diet recommendation system without a knowledge engineer
601
Building a class of fuzzy equivalence relations
602
Building a climate resilient farm: A risk based approach for understanding water, energy and emissions in irrigated agriculture
603
Building a Combined Micro/Macro Instruction Set According to a Modified Definition of Microprogramming
604
Building a common feature hypothesis for thymidylate synthase inhibition Original Research Article
605
BUILDING A COMMUNITY OF DATA SCIENTISTS: AN EXPLORATIVE ANALYSIS
606
Building a compact online MRF recognizer for large character set by structured dictionary representation and vector quantization technique
607
Building a Comprehensive System of Services to Support Adults Living with Long-Term Mechanical Ventilation
608
Building a corporate internet strategy: The IT managerʹs guide : by Amit K. Maitra. Van Nostrand Reinhold, 1996, ISBN 0-442-02246-8, £22.50 (paperback)
609
Building a Cost Effective Network for E-learning in Developing Countries
610
Building a cost-constrained decision tree with multiple condition attributes
611
Building a Creative Ecosystem – The Young Designers on Location Project
612
Building a culture of best practice
613
Building a Culture of Patient Safety by Eliminating Central Line Associated Bloodstream Infections
614
Building a customised Google-based collocation collector to enhance language learning
615
BUILDING A DATA-MINING GRID FOR MULTIPLE HUMAN BRAIN DATA ANALYSIS
616
Building a digital library: a technology manager’s point of view
617
Building a Digital Repository Program with Limited Resources, Abby Clobridge (Ed.). Oxford, UK, Chandos Publishing (2010), ISBN: 978-1-84334-596-1
618
Building a dynamic code to simulate new reactor concepts
619
Building a European Portrait of Corporate Social Responsibility Reporting
620
Building a financial diagnosis system based on fuzzy logic production system
621
Building a First-Year Information Literacy Experience: Integrating Best Practices in Education and ACRL IL Competency Standards for Higher Education Original Research Article
622
Building a foreign sales base: the roles of capabilities and alliances for entrepreneurial firms
623
Building a Full-Atom Model of L,Dtranspeptidase 2 from Mycobacterium tuberculosis for Screening New Inhibitors
624
Building a fuzzy expert system for electric load forecasting using a hybrid neural network
625
Building a Genome Analysis Pipeline to Predict Disease Risk and Prevent Disease Review Article
626
Building a geodatabase for mapping hydrogeological features and 3D modeling of groundwater systems: Application to the Saguenay–Lac-St.-Jean region, Canada
627
Building a geographic info-structure for sustainable development planning on a small island developing state
628
Building a global culture of science
629
BUILDING A GLOBAL FUTURE THROUGH RESEARCH AND INNOVATIVE PRACTICES IN OPEN AND DISTANCE LEARNING
630
Building a global normalized ontology for integrating geographic data sources
631
Building a Good Reputation
632
Building a grey box model to model the energy and mass transfer in an imperfectly mixed fluid by using experimental data Original Research Article
633
Building a Group-Based Opioid Treatment (GBOT) blueprint: a qualitative study delineating GBOT implementation
634
Building a Healthy World for Tomorrow
635
Building a high-performance key–value cache as an energy-efficient appliance
636
Building a high-performance, programmable secure coprocessor
637
Building a Knowledge Base
638
Building a Knowledge Brokering System using social network analysis: A case study of the Korean financial industry
639
Building a large location table to find replicas of physics objects Original Research Article
640
Building a learning organization in the offshore oil industry
641
Building a learning strategy at the top: Interviews with ten of Americaʹs CLOs
642
Building a maintenance policy through a multi-criterion decision-making model
643
Building a Metal Binding Domain, One Half at a Time Review Article
644
Building a metamodel of an irrigation district distributed-parameter model
645
Building a mobile robot for a floor-cleaning operation in domestic environments
646
Building a model of a useful Turing machine
647
Building a model of commitment for Generation Y: An empirical study on e-travel retailers
648
BUILDING A MODEL TO PREDICT CLASSIFIER ACCURACY
649
Building a Model Using Bayesian Network for Assessment of Posterior Probabilities of Falling From Height at Workplaces
650
Building a model-based fuzzy controller
651
Building a Multi-Objective Model for Multi-Product Multi-Period Production Planning with Controllable Processing Times: A Real Case Problem
652
Building a multi-walled carbon nanotube-based mass sensor with the atomic force microscope
653
Building a multi-walled carbon nanotube-based mass sensor with the atomic force microscope
654
Building a multi-walled carbon nanotube-based mass sensor with the atomic force microscope
655
Building a nano-crystalline α-alumina layer at a liquid metal/sapphire interface by ultrasound
656
Building a nano-crystalline α-alumina layer at a liquid metal/sapphire interface by ultrasound
657
Building a national innovation system through regional innovation systems
658
Building a near infrared spectral library for soil organic carbon estimation in the Limpopo National Park, Mozambique
659
Building a neuro-fuzzy system to efficiently forecast chaotic time series
660
Building a neuro-fuzzy system to efficiently forecast chaotic time series
661
Building a Neuro-Oncology Program and Epidemiological Profiling of Pediatric Brain Tumors in a Tertiary Cancer Care Center in India
662
Building a New Biocultural Synthesis: Political–Economic Perspectives on Human Biology: Alan H. Goodman, Thomas L. Leatherman, University of Michigan Press, Ann Arbor, 1998, 486 pp., (cloth) $59.50, (paper) $19.95
663
Building a novel vitronectin assay by immobilization of integrin on calixarene monolayer
664
Building a nursing leadership infrastructure
665
Building a pedagogy around action and emotion: experiences of Blind Opera of Kolkata
666
Building a peer-to-peer content distribution network with high performance, scalability and robustness Review Article
667
Building a Persian Gulf Missile Defense Shield and its Impact on Regional Security: (2001-2017)
668
Building a popular science library collection for high school to adult learners: issues and recommended resources : By Gregg Sapp. Westport, CT: Greenwood Press, 1995. 330 pp. $45.00. ISBN 0-313-28936-0.
669
Building a production grid in Scandanavia
670
Building a Profession: A Sociological Analysis of the Intern Development Program
671
Building a Program that Cultivates Library Leaders from Within the Organization Original Research Article
672
Building a project driven enterprise: how to slash waste and boost profits through lean project management: Ronald Mascitelli, Published by Technology Perspectives, Northridge, CA, USA. 2002. ISBN 0-9662697-1-3
673
Building a project ontology with extreme collaboration and virtual design and construction
674
Building a Project-Driven Enterprise: How to Slash Waste and Boost Profits through Lean Project Management: Ronald, Mascitelli (Eds.), Technology Perspectives, Northridge, CA, 2002, 368 pp.
675
Building a quadtree and its applications on a reconfigurable mesh
676
Building a Quantum Network: How to Optimize Security and Expenses
677
Building a regime for climate protection: Finland and international climate policy
678
Building a Reliable Steganography System Using Random Key in a spatial Domain of Image
679
Building a reputation along the value chain at Levi Strauss
680
Building a Resilient Change-Oriented Virtual Leadership Framework for the Higher Education Sector: A Narrative Review
681
Building a retrospective collection in pharmacy: a brief history of the literature with some considerations for U.S. health sciences library professionals
682
Building a Reusable Test Collection for Question Answering
683
Building a robust linear model with forward selection and stepwise procedures
684
Building a robust manufacturing strategy
685
Building a rule-based machine-vision system for defect inspection on apple sorting and packing lines
686
Building a scholarly communications center: modeling the Rutgers experience
687
Building a sensitive immunosensing platform based on oriented immobilization of histidine-tagged antibody on NiO-decorated SWNTs
688
Building a set of additive value functions representing a reference preorder and intensities of preference: GRIP method
689
Building a Singapore Learner Corpus of English Writing for Pedagogy
690
Building a Smarter Car: Visions of the Future at NHTSA,
691
Building a software experience factory using granular-based models
692
Building a Software for Prediction of Noise Propagation in a Complex Condition (Indoor to Outdoor)
693
Building a Special Collection of Children’s Literature in Your Library: Identifying, Maintaining and Sharing Rare or Collectible Items: By Dolores B. Jones; Chicago: American Library Association, 1998, 170 pp., $40.00 ($36.00 ALA members), softcover, ISBN
694
Building a stakeholderʹs vision of an offshore wind-farm project: A group modeling approach Original Research Article
695
Building a statistical model to predict reactor temperatures
696
Building a strategy on competences
697
Building a strong services brand: Lessons from Mayo Clinic
698
BUILDING A SUCCESSFUL CITY BRANDING CASE STUDY: DUBAI
699
Building a successful information literacy infrastructure on the foundation of librarian–faculty collaboration
700
Building a successful structural motif into sialylmimetics—cyclohexenephosphonate monoesters as pseudo-sialosides with promising inhibitory properties Original Research Article
701
Building a suited reduced modal basis for updating 3D acoustic models with the constitutive law error method Original Research Article
702
Building a supplier-customer relationship using joint new product development
703
Building a surgical robotics program
704
Building a sustainable World Through Tourism
705
Building a syllabic analyzer for Persian using finite state transducers
706
Building a systemic environmental monitoring and indicators for sustainability: What has the ecological network approach to offer?
707
Building a terabyte NEXRAD radar database for hydrometeorology research
708
Building a Therapeutic Alliance in Brief Therapy: The Experience of Community Mental Health Nurses
709
Building A Tidal Stream Chart on Navigation Fairway – Applying of Haiphong Fairway, Vietnam
710
Building a user-based model for web executive learning systems — a study of Taiwanʹs medium manufacturing companies
711
Building a validation measure for activity-based transportation models based on mobile phone data
712
Building a virtual hierarchy to simplify certification path discovery in mobile ad-hoc networks
713
Building a virtual outcrop, extracting geological information from it, and sharing the results in Google Earth via OpenPlot and Photoscan: An example from the Khaviz Anticline (Iran)
714
Building a Virus from Scratch: Assembly of an Infectious Virus Using Purified Components in a Rigorously Defined Biochemical Assay System
715
Building a wave energy policy focusing on innovation, manufacturing and deployment
716
Building a web-based information system for variety selection in field crops-objectives and results
717
Building a winning electric utility organization
718
Building a working understanding of protein adsorption with model systems and serendipity
719
Building a worldwide evaluation community: past, present, and future
720
Building academic geriatric nursing capacity: 2000–2005—A look back and the vision for the future
721
Building Academic Relations and Solidarity through Humour at Work
722
Building Acoustics, Tor Erik Vigran, Taylor & Francis (London and New York) (2008),
723
Building adaption model in assessing adaption potential of public housing in Singapore
724
Building adaptive capacity to cope with increasing vulnerability due to climatic change in Africa – A new approach
725
Building adaptive estimating equations when inverse of covariance estimation is difficult
726
Building addressable libraries: a site-selective allyl alkylation reaction
727
Building Ag nanoparticle 3D catalyst via Na2Ti3O7 nanowires for the detection of hydrogen peroxide
728
Building age, type of indoor heating and the occurrence of allergic rhinitis and asthma
729
Building agent-based corporate information systems: An application to telemedicine
730
Building agents for rule-based intrusion detection system
731
Building air conditioning system using fuel cell: Case study for Kuwait
732
Building Alliance Capability: Management Techniques for Superior Alliance Performance
733
Building Alliance Capability:: Management Techniques for Superior Alliance Performance
734
Building alliances: Defending immigrant rights in rural Oregon
735
Building alternative agri-food networks: Certification, embeddedness and agri-environmental governance
736
Building an Application-Aware IPsec Policy System
737
Building an Arabic Sentiment Lexicon Using Semi-supervised Learning
738
Building an ecosystem model using mismatched and fragmented data: A probabilistic network of early marine survival for coho salmon Oncorhynchus kisutch in the Strait of Georgia
739
Building an EDM process model by an instrumental variable approach based on two interactive Kalman filters
740
Building an Effective Rule-Based Light Stemmer for Arabic Language to Improve Search Effectiveness
741
Building an EFL Curriculum for Young Learners: A Brazilian experience
742
Building an Electronic Resource Collection: A Practical Guide. 2nd ed
743
Building an Electronic Resource Collection: A Practical Guide: by Stuart D. Lee. London: Library Association Publishing, 2002. 160 pp. ←24.95 soft ISBN 185604422X
744
Building an evaluation culture and evidence base for e-learning in three Hong Kong universities
745
Building an expert system to assist system refactorization
746
Building an expert travel agent as a software agent
747
Building an incentive-compatible safety net
748
Building an integrated modeling framework for assessing land-use change and its consequences for areal water balance in mountainous Southwest China
749
Building an intelligent system using modern Internet technologies
750
Building an inter-disciplinary science of health inequalities: the example of lifecourse research
751
Building an interpretable fuzzy rule base from data using Orthogonal Least Squares—Application to a depollution problem
752
Building an Islamic financial information system based on policy managements
753
Building an island-arc crustal section: Time constraints from a LA-ICP-MS zircon study
754
Building an isotopic hydrogeochemical indicator of anthropogenic pressure on urban rivers
755
Building an operational product ontology system
756
Building an Optimal Portfolio on Indonesia Sharia Stock Index (ISSI)
757
Building an understanding of water use innovation adoption processes through farmer-driven experimentation
758
Building analysis for inelastic earthquake design of regular moment frames and dual systems addressing moment redistribution
759
Building and analyzing models from data by stirred tank experiments for investigation of matrix effects caused by inorganic matrices and selection of internal standards in Inductively Coupled Plasma-Atomic Emission Spectroscopy
760
Building and analyzing models from data by stirred tank experiments for investigation of matrix effects caused by inorganic matrices and selection of internal standards in Inductively Coupled Plasma-Atomic Emission Spectroscopy
761
Building and analyzing the US airport network based on en-route location information
762
Building and Assessing Cultural Diversity Skills:: Implications for Sales Training
763
Building and climate influence on the balance temperature of buildings
764
BUILDING AND CONSTRUCTION: MILESTONES OF GREEN ARCHITECTURE TOWARDS SUSTAINABILITY
765
Building and deploying profitable growth strategies based on the waterfall of customer value added
766
Building and destroying students’ ‘academic identities’: the power of discourse in a two‐way immersion classroom
767
Building and Environment is heading towards the next level of excellence
768
Building and Environmental Performance Simulation: Current State and Future Issues
769
Building and evaluating a location-based service recommendation system with a preference adjustment mechanism
770
Building and evaluating context-aware collaborative working environments
771
Building and experimentation of a solar powered adsorption refrigerator
772
Building and Implementing Business Intelligence Systems for bookshops
773
Building and interconnecting hydrogen networks: Insights from the electricity and gas experience in Europe
774
Building and leveraging information in dynamic environments: The role of IT infrastructure flexibility as enabler of organizational responsiveness and competitive advantage
775
Building and managing virtual private network; by D. Kosiur; Wiley, New York, USA, 400 pages, ISBN 0471-295264 (£29.50)
776
Building and organizing internet collections
777
Building and Refining Protein Models within Cryo-electron Microscopy Density Maps Based on Homology Modeling and Multiscale Structure Refinement
778
Building and Running a Successful Research Business: A Guide for the Independent Information Professional, 2nd ed., M.E. Bates. Information Today Inc., Medford, NJ (2010)
779
Building and Selecting Mobile Agents for Network Management
780
Building and solving odd-one-out classification problems: A systematic approach
781
Building and sustaining community in asynchronous learning networks
782
Building and testing a virtual university
783
Building and Testing ana prioriGeophysical Model for Western Eurasia and North Africa
784
Building and testing conceptual and empirical models for predicting soil bulk density
785
Building and testing models of long-term agricultural intensification and population dynamics: A case study from the Leeward Kohala Field System, Hawai’i
786
Building and testing models of long-term agricultural intensification and population dynamics: A case study from the Leeward Kohala Field System, Hawai’i
787
Building and Testing Models of Long-Term Agricultural Intensification and Population Dynamics: A Case Study from the Leeward Kohala Field System, Hawai’i [Ecol. Model. 227 (2012) 18–20]
788
Building and Testing Models of Long-Term Agricultural Intensification and Population Dynamics: A Case Study from the Leeward Kohala Field System, Hawai’i [Ecol. Model. 227 (2012) 18–20]
789
Building and testing organized architectures of carbon nanotubes
790
Building and testing organized architectures of carbon nanotubes
791
Building and testing theories of decision making by travellers
792
Building application dependent hypertexts
793
Building application of recycled aggregate concrete for upper-ground structural elements
794
Building as Interface: or, What Architects Can Learn from Interaction Designers
795
Building as Refined Object: The Architecture of Antonio Citterio
796
Building assembly detailing using constraint-based modeling
797
Building asynchronous geospatial processing workflows with web services
798
Building automation system via LonWorks and Linux based personal computer
799
Building bank brands: How leadership behavior influences employee commitment
800
Building bench strength: A tool kit for executive development
801
Building better communities: social life on Londonʹs cottage council estates, 1919–1939
802
Building better connections: the National Library of Medicine and public health
803
Building better software with better tools
804
Building better therapy for children with acute lymphoblastic leukemia
805
Building better vaccines: how apoptotic cell death can induce inflammation and activate innate and adaptive immunity
806
Building bioclimatic charts for non-domestic buildings and passive downdraught evaporative cooling
807
Building block synthesis of predominantly (E) symmetrical and unsymmetrical 1,2-difluorostilbenes from 1,2-dibromo-1,2-difluoroethene
808
Building blocks and formation thermodynamics of α-Keggin-type [PW12O40]3− anion
809
Building blocks for a polarimeter-on-a-chip
810
Building blocks for a polarimeter-on-a-chip
811
Building Blocks for early childhood mathematics
812
Building blocks for odd–even multigrid with applications to reduced systems
813
Building blocks for peptide and carbamate libraries
814
Building blocks for phospha[n]pericyclynes
815
Building blocks for self-assembly: half-sandwich complexes of the [Ru([9]aneS3)]2+ metal center
816
Building blocks for the variety of absolute retracts
817
Building Blocks Incorporating Waste Materials Bound with Bitumen
818
Building blocks of bias: Gender composition predicts male and female group members’ evaluations of each other and the group
819
Building blocks of nanosized supported metals for catalysis: Carbonyl clusters or colloids?
820
Building bone
821
Building Brand Equity of Dian Pelangi in Social Media
822
Building Brand Loyalty: An Application of Expectation Confirmation Model in Mobile Social Commerce
823
Building bridges
824
Building bridges between acquisitions and collection development: Communication models for the electronic environment
825
Building bridges between New York city public high schools and a college: The cooperative library project
826
Building Bridges for Collaborative Digital Reference between Libraries and Museums through an Examination of Reference in Special Collections
827
Building bridges for innovation: the role of consultants in technology transfer
828
Building bridges for resource acquisition: Network relationships among headteachers in Ugandan private secondary schools
829
Building Bridges for Spinal Cord Repair
830
BUILDING BRIDGES IN THE THIRD PLACE
831
Building bridges on the road to peace. Centralism, resistance and the Basque revival
832
Building bridges within mathematics education: Teaching, research, and instructional design
833
Building Bridges, Not Walls
834
Building Bridges: Connecting Faculty, Students, and the College Library, by Monty L. McAdoo. Chicago: American Library Association, 2010. 176 p. $49.50. ISBN 978-0-8389-1019-1.
835
Building bridges: Crosslinking of sulfonated aromatic polymers—A review
836
Building bridges: Educational opportunities and constraints for teaching engineering, water, and sanitation concepts in resource poor areas Original Research Article
837
Building Bridges: Experiential Art Experiential Art
838
Building Bridges: Experiential Art Understanding
839
Building Bridges: Library Educators and Practitioners
840
Building bridges: Life span: Evolutionary, Ecological, and Demographic Perspectives edited by James R. Carey and Shripad Tuljapurkar. Population Council, New York, 2003. US$18.00 pbk (xi + 293); ISBN 0 87834 111 0
841
Building buyer commitment to the salesperson
842
Building calibration for IAQ management
843
Building canopy model for the analysis of urban climate
844
Building canopy model for the analysis of urban climate
845
Building capacity and competency in conducting health disparities research
846
Building capacity and sustainable prevention innovations: a sustainability planning model
847
Building Capacity for Green Economy: The Role of Islamic Finance
848
Building capacity for low-carbon communities: The role of grassroots initiatives
849
Building capacity for urban management in Ghana: some critical considerations
850
Building capacity in the basic space sciences in Southern Africa: Experiences and prospects Original Research Article
851
Building Capacity in the Life Sciences in the Developing World
852
Building Capacity or Provoking Fear: Early Childhood Teachers’ Appraisal for Professional Development
853
Building Capacity to Build Dependency? Institutional Paradoxes in Post 2001 State Building in Afghanistan
854
Building Capacity To Teach Infection Control and Prevention in Venezuela through Internet-Based Conferencing
855
Building carbohydrates on the dioxanone scaffold: stereoselective synthesis of d-glycero-d-manno-2-octulose
856
Building CBR systems with jcolibri
857
Building certified libraries for PCC: dynamic storage allocation
858
Building Chain and Cactus Representations of All Minimum Cuts from Hao–Orlin in the Same Asymptotic Run Time
859
Building characteristics as determinants of propensity to high indoor summer temperatures in London dwellings
860
Building Children and Adolescents’ Electronic Book Reading System: A Conceptual Model
861
Building Citizen Trust Through E-governme nt
862
Building citizenship in fragmented societies: The challenges of deracialising and integrating schools in post-Apartheid South Africa
863
Building cladding air pressure equalisation investigations—comparison between field results and a numerical model
864
Building Classroom Communities at the University Level
865
Building cluster and shading in urban canyon for hot dry climate: Part 1: Air and surface temperature measurements
866
Building cluster and shading in urban canyon for hot dry climate: Part 2: Shading simulations
867
Building CMS pixel barrel detector modules
868
Building CMS pixel barrel detector modules
869
Building commitment in buyer–seller relationships: A tie strength perspective
870
Building common knowledge at the boundaries between professional practices: Relational agency and relational expertise in systems of distributed expertise
871
Building communication theories: A socio/cultural approach : Fred L. Casmir Hillsdale, NJ: Lawrence Erlbaum Associates, Inc. 321 pp., $59.95, 1994
872
Building Communities: Some Experiences with IT
873
Building Community Bridges for Health: Consumer Health Librarians as Health Advocates
874
Building community capacity for tourism development
875
Building compact MQDF classifier for large character set recognition by subspace distribution sharing
876
Building comparable global change vulnerability assessments: The vulnerability scoping diagram
877
Building competence through cross-cultural collaboration in the aftermath of a tsunami: Experiences of Indonesian teachers
878
Building competences for new customer value creation: An exploratory study
879
Building competencies in the firm: Lessons from Japanese and European optoelectronics : Kumiko Miyazaki, (Macmillan, Basingstoke, 1995), 205 pp., £42.50, ISBN: 0333 616731
880
Building competitive advantage: innovation and corporate governance in European construction
881
Building competitive firms: technology policy initiatives in Latin America
882
Building Competitiveness in Grocery Supply Through Continuous Replenishment Planning:: Insights from the Field
883
Building Complaint Handling Mechanisms For Effective Leadership
884
Building comprehensible customer churn prediction models with advanced rule induction techniques
885
Building Condition Assessment for New Houses: A Case Study in Terrace Houses
886
Building confidence in models for multiple audiences: The modelling cascade
887
Building confidence in the reliability assessment of thermal-hydraulic passive systems
888
Building confidence in the reliability assessment of thermal-hydraulic passive systems
889
Building consensus for stabilizations
890
Building consensus on divisive issues: a case study of the Yukon wolf management team
891
Building constrained peptidomimetics: a convenient approach to 3-phenyl-5-vinyl substituted proline derivatives
892
Building contextual classifiers by integrating fuzzy rule based classification technique and k-nn method for credit scoring
893
Building contingency planning for closed-loop supply chains with product recovery
894
Building Control with Passive Dampers. Optimal Performance-Based Design for Earthquakes, Izuru Takewaki. John Wiley & Sons (Asia) Pte Ltd., 2 Clement Loop, # 02-01, Singapore 129809 (2009). 306 pages, ISBN: 978-0-470-82491-7 (cloth)
895
Building Control with Passive Dampers. Optimal Performance-based Design for Earthquakes, Izuru Takewaki. John Wiley & Sons (Asia) Pte Ltd., 2 Clement Loop, # 02-01, Singapore 129809 (2009). 306 pp., Cloth, ISBN: 978-0-470-82491-7.
896
Building Cost Comparison Between Conventional and Formwork System
897
Building counterexamples Original Research Article
898
Building counterexamples to generalizations for rational functions of Rittʹs decomposition theorem
899
Building creative thinking in the classroom: From research to practice
900
Building credit scoring models using genetic programming
901
Building crop models within different crop modelling frameworks
902
Building customer relations over the Internet
903
BUILDING CUSTOMER-CENTRIC ORGAN-IZATIONS- AN EVOLVING ROLE OF HR
904
Building customer–Supplier relationships in electronics
905
Building cyclic master surgery schedules with leveled resulting bed occupancy
906
BUILDING DAMAGE AND HUMAN CASUALTIES DURING THE BAM-IRAN EARTHQUAKE
907
Building damage caused by tree roots: laboratory experiments of GPR and ERT surveys
908
Building damage during nearby construction: Forensic analysis
909
Building damage from the Marmara, Turkey earthquake of August 17, 1999
910
Building Decision Procedures for Modal Logics from Propositional Decision Procedures: The Case Study of Modal K(m)
911
Building deductive object-oriented database systems in the ODMG era
912
BUILDING DEFECTS: POSSIBLE SOLUTION FOR POOR CONSTRUCTION WORKMANSHIP
913
Building deliberative public–private partnerships for waste management in Asia
914
Building demand-side control using thermal energy storage under uncertainty: An adaptive Multiple Model-based Predictive Control (MMPC) approach
915
Building democracy: Community architecture in the inner cities : Graham Towers University College London Press (1995) 272 pp pb £14.95 hb £45
916
Building design and energy end-use characteristics of high-rise residential buildings in Hong Kong
917
Building Design for Abnormal Loads and Progressive Collapse
918
Building design for buildability: an investigation of the current practice in Nigeria
919
Building design optimization using a convergent pattern search algorithm with adaptive precision simulations
920
BUILDING DESIGN SERVICES IN A DISTRIBUTED ARCHITECTURE
921
BUILDING DESIGN SERVICES IN A DISTRIBUTED ARCHITECTURE
922
Building Designs for Living: Studio 804 University of Kansas
923
Building detection by fusion of airborne laser scanner data and multi-spectral images: Performance evaluation and sensitivity analysis
924
Building Detection from Multiple Aerial Images in Dense Urban Areas
925
Building diagnostic systems in Sierra Leone: The role of point-of-care devices in laboratory strengthening
926
Building dialogic relationships through the world wide web
927
Building Digital Collections in the Algerian Context: Assets and Prospects
928
Building Digital Libraries: A How-To-Do-It Manual No. 153, by Terry Reese, Jr. and Kyle Banerjee. New York, NY: Neal Shuman, 2008. 275p. $75.00 ISBN 978-1-55570-617-3.
929
Building Digital Resources: Creating Facilities at INSA
930
Building Discretely Ordered Bezout Domains and GCD Domains Original Research Article
931
Building Discretely Ordered Bezout Domains and GCD Domains Original Research Article
932
Building diseases: Interior flooring made of “terrazzo” prefabricated cement mortar tiles: Three case studies
933
BUILDING DISTRIBUTED HETEROGENEOUS SMART PHONE JAVA APPLICATIONS AN EVALUATION FROM A DEVELOPMENT PERSPECTIVE
934
Building dynamic capabilities through knowledge resources
935
Building ecology into the planning continuum: case study of desert land preservation in Phoenix, Arizona (USA)
936
Building effective public–private partnerships: Experiences and lessons from the African Comprehensive HIV/AIDS Partnerships (ACHAP)
937
Building electronic cooperation in the 1990s— the Maryland, Georgia, and Texas experiences
938
Building Electronic Library Collections: The Essential Guide to Selection Criteria and Core Subject Collections, by Diane Kovacs. New York, NY: Neal-Schuman Publishers, Inc., 2000. 250p. $75.00. ISBN 1–55570-362–3. LC 99–048575
939
Building enabling conditions for integrated coastal management at the national scale in Tanzania
940
Building Energy Analysis (BEA): A methodology to assess building energy labelling
941
Building Energy Consumption in Malaysia: An Overview
942
Building energy demand patterns for department stores in Korea
943
Building energy efficiency and fire safety aspects of reflective coatings
944
Building energy efficiency and thermal comfort in tropical climates: Presentation of a numerical approach for predicting the percentage of well-ventilated living spaces in buildings using natural ventilation
945
Building energy efficiency in different climates
946
Building energy efficiency labeling programme in Singapore
947
Building Energy Management as Continuous Quality Control Process
948
Building Energy Management as Continuous Quality Control Process
949
Building Energy Management Using Building Information Modeling: Evaluation of Building Components and Construction Materials
950
Building Energy Optimization: Implementing Green Roof and Rainwater Harvester System for a Residential Building
951
Building energy performance analysis by an in-house developed dynamic simulation code: An investigation for different case studies
952
Building energy performance evaluation of building integrated photovoltaic (BIPV) window with semi-transparent solar cells
953
Building energy performance simulation as part of interoperable software environments
954
Building energy performance: A LCA case study of kenaf-fibres insulation board
955
Building energy research in Hong Kong: A review
956
Building energy saving potential in Hot Summer and Cold Winter (HSCW) Zone, China—Influence of building energy efficiency standards and implications
957
Building energy simulation considering spatial temperature distribution for nonuniform indoor environment
958
Building energy simulation using multi-years and typical meteorological years in different climates
959
BUILDING ENGLISH VOCABULARY THROUGH ROOTS, PREFIXES AND SUFFIXES
960
Building Enhancers from the Ground Up: A Synthetic Biology Approach
961
Building envelope design with the objective to ensure thermal, visual and acoustic comfort conditions
962
Building envelope failure assessment framework for residential communities subjected to hurricanes
963
Building envelope loads and commercial sector electricity use in Hong Kong
964
Building envelope regulations on thermal comfort in glass facade buildings and energy-saving potential for PMV-based comfort control
965
Building envelope shape design in early stages of the design process: Integrating architectural design systems and energy simulation
966
Building envelopes are part of a whole: reconsidering traditional approaches
967
Building environment simulation before desk top computers in the USA through a personal memory
968
Building environmental sustainability: empirical evidence from Logistics Service Providers
969
Building environmentally sustainable information services: A green is research agenda
970
Building Environments for Visual Programming of Robots by Demonstration
971
Building evaluation capacity for HIV prevention programs
972
Building evaluation capacity in human service organizations: a case study
973
Building Evaluation Capacity: 72 Activities for Teaching and Training. By Hallie Preskill and Darlene Russ-Eft. Thousand Oaks, CA: SAGE, 2005. 366 pp. $39.95. ISBN 0-7619-2810-3 (paperback).
974
Building evaluation capacity: Definitional and practical implications from an Australian case study
975
Building evidence for early initiation of clopidogrel loading in non–ST-segment elevation acute coronary syndromes: Going past the American College of Cardiology/American Heart Association guidelines
976
Building Evidence for Environmental and Policy Solutions to Prevent Childhood Obesity: The Healthy Eating Research Program
977
Building Exoskeletons for the Integrated Retrofit of Social Housing
978
Building expert critics for ethical issue testing
979
Building extraction from high-resolution optical spaceborne images using the integration of support vector machine (SVM) classification, Hough transformation and perceptual grouping
980
Building extraction from oblique airborne imagery based on robust façade detection
981
Building façade design for daylighting quality in typical government office building
982
Building facade interpretation from uncalibrated wide-baseline image sequences
983
Building factorial regression models to explain and predict nitrate concentrations in groundwater under agricultural land
984
Building fast well-balanced two-stage numerical schemes for a model of two-phase flows
985
Building finite element analysis programs in distributed services environment
986
Building Fire Safety Audit at Faculty X, University of Indonesia, Year 2006
987
Building flax fibres: more than one brick in the walls
988
Building flexible organizations for fast-moving markets
989
Building floor analysis by the boundary element method
990
Building Fluorescent Sensors by Template Polymerization: The Preparation of a Fluorescent Sensor for l-Tryptophan
991
Building Fluorescent Sensors for Carbohydrates Using Template-Directed Polymerizations
992
Building focused cardiac ultrasound capacity in a lower middle-income country: A single centre study to assess training impact
993
Building footprint database improvement for 3D reconstruction: A split and merge approach and its evaluation
994
Building for safety compendium. An annotated bibliography and information directory for safe building : A. Clayton and I. Davis, Intermediate Technology Publications, London, 1994, 80 pp., £6.95 paperback
995
Building for the future at the expense of the present
996
Building form and environmental performance: archetypes, analysis and an arid climate
997
Building form for cold climatic zones related to building envelope from heating energy conservation point of view
998
Building fully customisable middleware using an aspect-oriented approach
999
Building functional materials for health care and pharmacy from microfluidic principles and Flow Focusing
1000
Building fuzzy approach with linearization technique for fully rough multi-objective multi-level linear fractional programming problem