<< مقالات لاتين >>
<< بر اساس عنوان >>
1
Investigating the suitability of the Calgary Biofilm Device for assessing the antimicrobial efficacy of new agents
2
INVESTIGATING THE SURFACE ELASTICITY AND TENSION EFFECTS ON CRITICAL BUCKLING BEHAVIOUR OF NANOTUBES BASED ON DIFFERENTIAL TRANSFORMATION METHOD
3
Investigating the surface quality and confinement of Si:P image at different growth temperatures
4
investigating the susceptibility of seyyed mostafa hosseini tabataba’i from sunnis
5
Investigating the Sustainability of Energy Production and Consumption in Data Centers with the Design and Morphology Approach of the Building
6
Investigating the sustainability of lignocellulose-derived fuels for light-duty vehicles
7
Investigating the sustainability of outcomes in a chronic disease treatment programme
8
Investigating the swelling pressure of compacted crushed-Callovo-Oxfordian claystone
9
Investigating the Synchronicity of Instantaneous or Gradual Revelation with Bi‘that
10
Investigating The Synergistic and Antimicrobial Effect of Glycolipid Biosurfactants Produced by lt;i gt;Shewanella alga lt;/i gt; 12B and lt;i gt;Bacillus pumilus SG lt;/i gt; Bacteria with Thyme Plant Extract on Some Pathogenic Bacteria
11
Investigating the synergistic antioxidant effects of some flavonoid and phenolic compounds
12
Investigating the TACOM measure as a general tool for quantifying the complexity of procedure guided tasks
13
Investigating the Technical Efficiency of Date Palm Cultivation Using the Data Envelopment Analysis
14
Investigating the technological limits of micro-injection molding in replicating high aspect ratio micro-structured surfaces
15
Investigating the Tempo Effect on Completed Fertility: The Effect of Age at First Cohabitation or Birth on Completed Fertility in Malawi, Africa
16
Investigating the temporal variation of the scaling behavior in rainfall data measured in central Argentina by means of detrended fluctuation analysis
17
Investigating the Temporary and Permanent Influential Variables on Iran Inflation Using TVP-DMA Models
18
Investigating the Tendency of the Rural Society to Tourism Development and Identifying the Factors Affecting It (Case Study: Tourism Villages of Karaj)
19
Investigating the Tendency towards Research in the Curriculum of a Paramedical Faculty
20
Investigating the testing procedure limits for measuring particle strength distribution
21
Investigating the theoretical construct and invariance of the self-control scale using confirmatory factor analysis
22
Investigating the Theoretical Foundations of Human Rights in Islamic Thought
23
Investigating the Theory of Games in Stocks and Investments
24
Investigating the Theory of Survival Analysis in Credit Risk Management of Facility Receivers: A Case Study on Tose'e Ta'avon Bank of Guilan Province
25
Investigating the Therapeutic Effect of Lota Carrageenan in Allergic and Non-Allergic Rhinitis
26
Investigating the Therapeutic Effect of β-Interferon and Methylprednisolone on COVID- 19 Patients’Consequence: A Non- Randomized, Double-Blinded, Controlled Study
27
Investigating the Therapeutic Effects of Some Foods Based on Hadith Teachings
28
Investigating the Therapeutic Potential of a Probiotic in a Rat Model for Infection Following Fracture Fixation
29
Investigating the therapeutic potential of Bifidobacterium breve and Lactobacillus rhamnosus postbiotics through apoptosis induction in colorectal HT-29 cancer cells
30
Investigating the Therapeutics Effects of Oral Cavity Derived Stem Cells on Neurodegenerative Diseases: A Systematic Review
31
Investigating the thermal performance of a nano-fluid based flat - plate solar collector
32
Investigating the thermal profile of a marine vessel engine room through simulation with field measurements
33
Investigating the thermal response of a micro-optical shutter
34
Investigating the thermal-hydraulic performance of new refrigerant mixtures through numerical simulation of minichannel and microchannel evaporators
35
Investigating the thermodynamics and economics of operating the thermal power plant under uncertain conditions
36
Investigating the thermodynamics of small biosystems with optical tweezers
37
Investigating the thermoelectric properties of synthesized Bi2Te3 under different synthesis pressures
38
Investigating the thermo-mechanical behaviour of cementitious materials using image processing techniques
39
Investigating the Third Order Solitary Wave Generation Accuracy using Incompressible Smoothed Particle Hydrodynamics
40
Investigating the threshold effects of inflation on PPP
41
Investigating the time course of tactile reflexive attention using a non-spatial discrimination task
42
Investigating the time dynamics of seismicity by using the visibility graph approach: Application to seismicity of Mexican subduction zone
43
Investigating the time-clustering properties in seismicity of Umbria–Marche region (central Italy)
44
Investigating the time-correlation properties in self-potential signals recorded in a seismic area of Irpinia, southern Italy
45
Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode
46
Investigating the toughness and fatigue behavior of conventional and SBS modified asphalt mixes
47
Investigating the Toxicity Caused by Photodynamic Therapy with a Low-power Diode Laser with a Wavelength of 810 nm Compared to a Combination of Curcumin in Breast Cancer Cells
48
Investigating the trade-off between operating revenue and CO2 emissions from crude oil distillation using a blend of two crudes
49
Investigating the Training of Subjective Norms and Empathy of Buyers Through the Effectiveness of Advertising on Social Networks
50
Investigating the Translation of Genderism from Persian to English: A Case Study of I’ll Turn off the Lights
51
Investigating the transport characteristics and cell performance for a micro PEMFC through the micro sensors and CFD simulations
52
Investigating the transport properties of the excitonic state in quasi-Corbino electron bilayers
53
Investigating the transverse behavior of Glass–Epoxy composites under intermediate strain rates
54
Investigating the Treatment of Oil and Gas Produced Water Using a Spray Dryer on a Bench Scale
55
Investigating the Trend and Severity of Withdrawal Symptoms in Methamphetamine Users Amongst Homeless Addicts
56
Investigating the Trend of Temperature Changes in Isfahan Station, Iran Using the Sequential Mann-Kendall Method
57
Investigating the Tribological Behavior of Diesel-biodiesel Blends with Nanoparticle Additives under Short-term Tests
58
Investigating the Tuberculosis condition in Khuzestan province during 2005-2012
59
Investigating the two-moment characterisation of subcellular biochemical networks
60
Investigating the two-stage assembly flow shop scheduling problem with uncertain assembling times
61
Investigating the Ultrasonic Assistance in the Tube Hydroforming Process
62
Investigating the ultraviolet properties of gravity with a Wilsonian renormalization group equation Review Article
63
Investigating The Undergraduate Experience Of Assessment In Higher Education
64
Investigating the underlying factors for improving information quality of accounting information system
65
Investigating the Underlying Intelligence Mechanisms of the Biological Olfactory System
66
Investigating the underlying Markovian dynamics of ECG rhythms by information flow
67
Investigating the Underlying Psychiatric Disorders Leading to Suicide among Patients Hospitalized in Poisoning Center in Emam Reza Educational, Research and Treatment Center in Mashhad, 2015
68
Investigating the Uni-HEUR thickener performance considering hydrophilic segment length
69
Investigating the Unintentional Poisoning Epidemiology in Prehospital Emergency Center in Qaemshahr City, Iran
70
Investigating the universal distributions of normalized indicators and developing field-independent index
71
Investigating the unwanted horse problem in Minnesota, Wisconsin, and Texas
72
INVESTIGATING THE URBAN SIGNS FOR READABILITY IN TODAY S URBANISM (CASE STUDY: MASHHAD DOWNTOWN, IRAN)
73
Investigating the Urban trees’ diversity in Tehran –Iran using i-Tree Eco model
74
Investigating the Use and Optimization of Low Dose kV and Contrast Media in CT Pulmonary Angiography Examination
75
Investigating the use of alluvial fan volume to represent fan size in morphometric studies
76
Investigating the Use of Chemicals in Sustainable Architecture to Save Energy
77
Investigating the Use of Chestnut Shells to Improve Brioche Characteristics
78
Investigating the Use of Compliments and Compliment Responses in Persian: Effect of Educational Background
79
Investigating the Use of Compliments in Persian and English: A Case Study of Iranian EFL Students
80
Investigating the use of duration-based moving windows to improve software effort prediction: A replicated study
81
Investigating the use of endogenous quinoid moieties on carbon fibre as means of developing micro pH sensors
82
Investigating the Use of Games and Flash Cards in Teaching Spatial and Temporal Prepositions to Iranian Pre-Intermediate EFL Learners
83
Investigating the Use of Gestures Among Children with Down Syndrome in India
84
Investigating the Use of Human Albumin in a Non-Teaching Hospital in Iran
85
Investigating the Use of Information and Communication Technology in the Design of a Smart City in the 22nd District of Tehran (SWOT Analysis)
86
Investigating the Use of IRI Navy Logistics Capacities in Case of Encountering a Crisis Institutions
87
Investigating the use of nanofluids to improve high heat flux cooling systems
88
Investigating the Use of Paratactic and Hypotactic Conjunctions among Iranian Pre-university Students
89
Investigating the Use of Rehabilitation Based on Play Therapy to Increase the Attention of Medical Students
90
Investigating the use of sedimentary geochemical proxies for paleoenvironment interpretation of thermally mature organic-rich strata: Examples from the Devonian–Mississippian shales, Western Canadian Sedimentary Basin
91
Investigating the use of vertical vibration to recover metal from electrical and electronic waste
92
Investigating the Use of White Lies During COVID-19 Pandemic: A Qualitative Study
93
Investigating the Usefulness of a New Electronic Error- Reporting System in Medical Error Management in the Shohadaye Haftom Tir Hospital in 2019-2020
94
Investigating the usefulness of cyclic voltammetry to determine myoglobin reduction potential and oxygenation
95
Investigating the utilisation of the Micro-Functions of Bahasa Melayu by English Teachers
96
Investigating the Validity Amount of the Talent Management Model based on the Teachings of Nahjolbalagha
97
Investigating the Validity and Reliability of Bengali Version of Communication Outcome After Stroke Scale
98
Investigating the validity of conventional joint set clustering methods
99
Investigating the validity of existing definitions and empirical equations of effective length/area of grounding wire/grid for transient studies
100
INVESTIGATING THE VALIDITY OF PHD ENTRANCE EXAM OF ELT IN IRAN IN LIGHT OF ARGUMENT-BASED VALIDITY AND THEORY OF ACTION
101
Investigating the validity of pollution haven hypothesis in the gulf cooperation council (GCC) countries
102
Investigating the value dairy farmers place on a reduction of lameness in their herds using a willingness to pay approach
103
Investigating the value level of pharmaceutical companies in Tehran Stock Exchange
104
Investigating the Value of Scholarly Book Reviews for the Work of Academic Reference Librarians
105
Investigating the Variation and Versatility of an Effective Environment in Resident’s Satisfaction of Residential Complexes (Case study: Isfahan Zeytun Residential Complex)
106
Investigating the variation in the properties of hydrogenated 0.31% carbon steel
107
Investigating the variation in the properties of hydrogenated 0.31% carbon steel
108
Investigating the Variation of TREC/KREC in Combined Immunodeficiencies
109
Investigating the Ventilation System of an Intensive Care Unit in the COVID-19 Crisis: A Study in a Hospital of Tehran, Iran
110
Investigating the versatility of multifunctional silver nanoparticles: preparation and inspection of their potential as wound treatment agents
111
Investigating the Vesta–vestoid–HED connection
112
Investigating the viscoelastic fluid behavior in hollow fiber membrane fabrication process using Giesekus model
113
Investigating the Visual Fatigue in VDT Operators in the Banks of Qasr-e Shirin (Kermanshah-Iran)
114
Investigating the vulnerability downstream area of Taleghan dam due to dam failure
115
Investigating the water balance of on-farm techniques for improved crop productivity in rainfed systems: A case study of Makanya catchment, Tanzania
116
Investigating the wear characteristics of engineered surfaces: low-temperature plasma nitriding and TiN + MoSx hard-solid lubricant coating
117
Investigating the wind-induced effects on Tall Buildings to reduce Drag Coefficient through Large Eddy Simulation (LES)
118
INVESTIGATING THE WORD ASSOCIATION BEHAVIOR OF PERSIAN SPEAKERS: THE CASE OF IRANIAN CHILDREN AND ADULTS
119
Investigating the Work-related Accidents in Iran: Analyzing and Comparing the Factors Associated With the Duration of Absence From Work
120
Investigating the worldʹs rich and powerful: Education, cognitive ability, and sex differences
121
Investigating the Worth of Internet Advertising
122
Investigating Therapeutic Effects of Retinoic Acid on Thyroid Cancer via Protein-Protein Interaction Network Analysis
123
Investigating therapists’ intention to use serious games for acquired brain injury cognitive rehabilitation
124
Investigating thermal degradation, crystallization and surface behavior of l-lactide, glycolide and trimethylene carbonate terpolymers used for medical applications
125
Investigating thermal dimerization of N-methyl-flindersine. Syntheses and characterizations of paraensidimerines
126
INVESTIGATING THERMAL EFFECTS IN NONLINEAR BUCKLING ANALYSIS OF MICRO BEAMS USING MODIFIED STRAIN GRADIENT THEORY
127
Investigating thermal energy equilibrium in the Persian Gulf
128
Investigating thermal performance of a partly sintered wick heat pipe filled with different working fluids
129
Investigating thermal properties of biodiesel/diesel mixtures using photopyroelectric technique
130
Investigating thermodynamic properties of LiCl in amide–water mixtures with ɛ-increasing and ɛ-decreasing solvent at 298.15 K
131
Investigating thermoelectric properties of doped polyaniline nanowires
132
Investigating thermoelectric properties of doped polyaniline nanowires
133
Investigating thermo-physical properties and thermal performance of Al2O3 and CuO nanoparticles in Water and Ethylene Glycol based fluids
134
Investigating thickness and internal structure of alpine mires using conventional and geophysical techniques
135
Investigating Thickness and Porosity of Covering Layer of Chitosan on Pistachio Kernel
136
Investigating thio-analogues of PSE acetals: a more complex reaction
137
Investigating Thomas Hardy’s Reaction to Victorian Religious Forces through Reading Tess of the D’Urbervilles and Jude the Obscure
138
Investigating Tibialis Anterior Muscle Activity Levels in Patients With Genu Varum During Single-Leg Jump-Landing Task
139
Investigating tooth loss and associated factors among older Taiwanese adults
140
Investigating torsional fatigue with a novel resonant testing fixture
141
Investigating Toury’s Initial Norms in Literary Translation before and after the Islamic Revolution: A Case Study of Two Persian Translations of the Catcher in the Rye
142
Investigating Toxic Effects of the HIV-RT Inhibitor 2-Phenoxymethyl- 5-Chloro-Benzimidazole on Rat Liver
143
Investigating Trade Liberalization, Growth and Employment: Time Series Evidence from India
144
Investigating traffic flow in the presence of hindrances by cellular automata
145
Investigating tragedy manifestations in Tarikhe Beihaghi (history book by Beihaghi)
146
Investigating Transactions Among Motives, Emotional Regulation Related to Testing, and Test Emotions
147
Investigating transcriptional regulation of Prdx6 in mouse liver cells
148
Investigating transit production and performance: a programming approach
149
INVESTIGATING TRANSLATION COMPETENCE AND ITS SUB-COMPETENCIES THROUGH DIFFERENT VIEWPOINTS AND PROPOSING PACTE GROUP MODEL AS THE BEST ONE
150
Investigating Translation Strategies of Culture-Specific Items in Alignment with Nord’s Binary Translation Typology: A Case Study of Unaccustomed Earth
151
Investigating Translation Theories Course in Iranian Universities: Students’ Expectations and Perceptions in Focus
152
Investigating transport pathways in the ocean
153
Investigating transport properties and turbidity dynamics of a karst aquifer using correlation, spectral, and wavelet analyses
154
Investigating transport properties of nanofiltration membranes by means of a steric, electric and dielectric exclusion model
155
Investigating transportation system in container terminals and developing a yard crane scheduling model
156
Investigating Traumatic Injuries to Occupants Involved in Rollover Crashes Who Were Admitted to a Community Hospital
157
Investigating trekkers’ attitudes to the environment of Annapurna, Nepal
158
Investigating Trend of Water Level Changes in Urmia Lake (1984- 2017)
159
Investigating trends in rural health outcomes: a research agenda
160
Investigating Tribological Characteristics of Ni-P and Double–Layered Ni-P/Ni-B Electroless Coatings Applied to the Carbon Mild Steel Ck45
161
Investigating Tubes Material Selection on Thermal Stress in Shell Side Inlet Zone of a Vertical Shell and Tube Heat Exchanger
162
Investigating tumor perfusion and metabolism using multiple hyperpolarized 13C compounds: HP001, pyruvate and urea
163
Investigating Two Different Training Time Frames during Ramadan Fasting
164
Investigating two of Al-Ghazali’s Views on Architecture based on Iḥyaʾ ʿŪlum al-Dīnʾ: Form and Content; Rulings of Architecture
165
Investigating UHMWPE wear mechanisms by decomposing wear debris distributions
166
Investigating ultra-thin lubricant layers using resonant friction force microscopy
167
Investigating uncertainty and sensitivity in integrated, multimedia environmental models: tools for FRAMES-3MRA
168
Investigating Unconventional Abbreviations In Sms Texts
169
Investigating Underlying Principles to Guide Health Impact Assessment
170
Investigating Understandings of Turkish Medical Graduate Students about Nature of Scientific Knowledge, Scientific Method, Characteristics of Scientists and Definition of Science
171
Investigating unpopularity of utility-based approaches in portfolio optimization; introducing an extension to the UTASTAR method
172
Investigating Urban Expansion and Its Drivers in Ardebil
173
Investigating use continuance of data mining tools
174
Investigating User Resistance of Employees Working at Technology Companies in Istanbul towards Digital Transformation
175
Investigating Validity and Reliability and Factor Analysis of Webster’s Wisdom Questionnaire in Iran
176
Investigating vapor–liquid equilibria of binary mixtures containing supercritical or near-critical carbon dioxide and a cyclic compound using cascade neural network
177
Investigating variability in catch rates of halibut (Hippoglossus stenolepis) in the Pribilof Islands: Is temperature important?
178
Investigating variability of fatigue indicator parameters of two-phase nickel-based superalloy microstructures
179
Investigating variation in the costs and benefits of addiction treatment: econometric analysis of the Chicago Target Cities Project
180
Investigating variations in the provision of digital services in public libraries using network-based GIS models Original Research Article
181
Investigating variations of the electron beam voltage on the traveling wave tube output power in the different frequencies
182
Investigating various effects of reformer gas enrichment on a natural gas-fueled HCCI combustion engine
183
Investigating Various Levels of Financial Literacy with Behavioral Trends of Investors
184
Investigating Various Models Expressing the Factors Affecting Social Capital in Tehran
185
Investigating Vegetation of Mowed and Grazed Areas in Tamdere Village Alpine Pastures in Turkey
186
Investigating vehicle-slab track interaction considering random track bed stiffness
187
Investigating Ventriculoperitoneal Shunt Infections, Characteristics and Microbiology in Pediatric Patients with Hydrocephalus: A Single-Center Experience in Tehran, Iran
188
Investigating Verbal Repetition in Persian-Speaking Patients with the Semantic Variant of Primary Progressive Aphasia Compared to Healthy Individuals
189
Investigating virulence factors of clinical Candida isolates in relation to atmospheric conditions and genotype
190
Investigating Vitamin D Serum Levels in Children with Congenital Heart Disease Compared with the Healthy Control Group
191
Investigating Warm and Humid Climate with the Approach of Production of Quantitative and Qualitative Architectural Models
192
Investigating waste reduction potential in the upstream processes of offshore prefabrication construction
193
Investigating water availability for introducing an additional crop yield in dry season on hill land at Rubirizi, Rwanda
194
Investigating Water Conflict Management Strategies among Irrigated Wheat Growers of Doroudzan Dam Network
195
Investigating Water Quality Parameters of the Water of the Distribution Network, the Outlet Water of the Household Water Purification Device, and the Widely Consumed Bottled Waters Distributed in the City of Ardabil, and Comparing them with Drinking Water Standards in 2019
196
Investigating Water Supply System Electro-Mechanical Equipment Problems: A Case Study of Ethiopia
197
Investigating Web impact factors of type 1, type 2 and type 3 medical universities in Iran
198
Investigating wettability alteration due to asphaltene precipitation: Imprints in surface multifractal characteristics
199
Investigating wettability alteration during MEOR process, a micro/macro scale analysis
200
Investigating wettability and optical properties of PADC polymer irradiated by low energy Ar ions
201
investigating women s pregnancy care behaviors based on the health belief model and social support patterns in pregnant women referring to health centers covered affiliated by iranshahriran faculty of medical science
202
Investigating Women’s Lifestyle during the Preconception Period in Kalat County, Iran
203
Investigating Work-Family Conflict Status and Its Relationship with Teachers’ Demographic Features of Shahrekord: Cross-Sectional Study
204
Investigating Workload and Occupational Burnout of healthcare workers in the Welfare Organization of Gonabad City
205
Investigating Yang-Mills theory and confinement as a function of the spatial volume Original Research Article
206
Investigating Zinc Tolerance in Saline and Drought Tolerant Ruta graveolens Tissue Cultures
207
Investigating Zone Pricing in a Location-Routing Problem Using a Variable Neighborhood Search Algorithm
208
Investigating β Thalassemia Patients and Their Growth: A Brief Review and Our Clinical Experience
209
Investigating β-Hydroxyenduracididine Formation in the Biosynthesis of the Mannopeptimycins
210
Investigating γ- and X-ray properties of GRBs using multivariate statistics Original Research Article
211
Investigating, Choosing and Prioritizing the Challenges of Using Crypto currencies in Global Transactions
212
InvestigatingIranianUndergraduateEFLLearners’andTeachers’AttitudeTowardsPartnershipApproach
213
Investigatingthe Effect of Pressure on Third Liver Point on Primary Dysmenorrhea: a Randomized Controlled Clinical Trial
214
InvestigatingtheDifferencebetweenIranian EFLLearners’ReadingComprehensionUsing OnlineandOfflineActivities
215
Investigatinon of Green Hospital Standards in Jiroft Hospitals
216
Investigation (In Vivo and In Vitro) of Booster Dose Vaccine Requirement for Long-Term Protection against Hepatitis B Virus Infection
217
Investigation a new approach for employees training of organization
218
Investigation about suitability of hard core attractive Yukawa potential as a model potential for short-range attractive interactions in colloidal dispersions
219
Investigation about the effects of exterior surface paint color on temperature development in aboveground pipeline
220
Investigation about thermophysical properties of Ln2Ce2O7 (Ln = Sm, Er and Yb) oxides for thermal barrier coatings
221
Investigation acute toxicity some of heavy metals at different water hardness
222
Investigation acute toxicity some of the heavy metals at different water hardness
223
Investigation Adaptation of Lettuce Varieties in different Date Sowing Climatic Condition
224
Investigation an Antifungal Activity of Diclofenac Sodium against Hyphae Formation in Aspergillus Fumigatus with Attention to the Expression of Ef-1 Gene
225
Investigation Analysis of the Agronomical Characteristics of the Daily Rainfall in Rain-Fed Agriculture (Case study: Tehran)
226
Investigation and a New Evaluation Method of the Resistance of Maize Hybrids grown in Hungary to Fusarium moulds
227
Investigation and Analysis of Dual Metal Gate Overlap on Drain Side Tunneling Field Effect Transistor with Spacer in 10nm Node
228
Investigation and analysis of effect of tear phenomenon of hydraulic hoses of road construction machineries on loss and profits of projects
229
Investigation and Analysis of Empirical Field Seismic Damage to Bottom Frame Seismic Wall Masonry Structure
230
Investigation and analysis of evidence of asymmetric churn in travel demand models
231
Investigation and Analysis of Omnichannel Logistics Models: A Study in The Electronic Retail Industry in Indonesia
232
Investigation and analysis on ITER in-vessel coils’ raw-materials
233
Investigation and analysis on the energy consumption of starred hotel buildings in Hainan Province, the tropical region of China
234
Investigation and application of a model for porous foam aerosol penetration
235
Investigation and application of impregnated scandate cathodes
236
Investigation and Application of Non-sinusoidal Oscillation Technique of Mold Original Research Article
237
Investigation and application of polysiloxane-based gel electrolyte in valve-regulated lead-acid battery
238
Investigation and application of quantitative relationship between sp energy levels of Bi3+ ion and host lattice
239
Investigation and Assess Knowledge of Small Pistachio Growers in Kerman Province about Aflatoxin
240
Investigation and Calculation of Magnetic Field in Tubular Linear Reluctance Motor Using FEM
241
Investigation and characterisation of silicon nitride and silicon carbide thin films
242
Investigation and characterization of La-doped PZT nanocrystalline ceramic prepared by mechanical activation route
243
Investigation and characterization of Pb(Zr0.52Ti0.48)O3 nanocrystalline ferroelectric ceramics: By conventional and microwave sintering methods
244
Investigation and Classification of Chronic Wound Tissue images Using Random Forest Algorithm (RF)
245
Investigation and Compare the Allelopathic Effects for Different Tissues of Peganum harmala in Different Amounts on the Bromus tectorum Germination and Growth Characteristics
246
Investigation and Comparison Among Improvements in Biasing Technologies of CMOS Opamps
247
Investigation and comparison between new satellite impact test results and NASA standard breakup model
248
Investigation and Comparison Effects of Fluid Injection Type in Thrust Vector Control
249
Investigation and Comparison Effects of Fluid Injection Type in Thrust Vector Control
250
Investigation and comparison of anthropometric indices, dietary habits, knowledge, attitude, and practice of sports club’s members of sports supplements consumption in five regions of Tehran
251
Investigation and Comparison of Cobalt ferrite composite nanoparticles with individual Iron oxide and Cobalt oxide nanoparticles in azo dyes removal
252
INVESTIGATION AND COMPARISON OF COLON SPECIFICITY OF NOVEL POLYMER KHAYA GUM WITH GUAR GUM
253
investigation and comparison of experimental data of ethylene dichloride adsorption by bagasse with adsorption isotherm models
254
Investigation and Comparison of Fluoride Adsorption Behavior on a Hybrid Material Containing Zirconium Dioxide Coated on γ-Alumina (60 and 90) and Their Initial Precursor in Aqueous Solution
255
Investigation and comparison of laser and ultrasound effects on the temperature increasing of the solutions containing graphene oxide nanoparticles for thermal treatment of osteosarcoma cancer cells
256
Investigation and Comparison of Light Propagation in Two Graded Photonic Crystal Structures
257
Investigation and Comparison of Light Propagation in Two Graded Photonic Crystal Structures
258
Investigation and Comparison of Microstructure and Mechanical Properties Between Parts of Shear Spinning and Rolled
259
Investigation and comparison of numerical methods in predicting the behavior of rebar in reinforced concrete hollow slab (from start to crack) in Abaqus finite element software
260
Investigation and Comparison of Runoff Threshold in Different Climates of Iran
261
Investigation and Comparison of the Effect of TGF-β3, kartogenin and Avocado/Soybean Unsaponifiables on the In-vitro and In-vivo Chondrogenesis of Human Adipose-Derived Stem Cells on Fibrin Scaffold
262
investigation and comparison of the effects of eightweeks of resistance and endurance training with vitamin d3 supplementation on blood pressure, resting heart rate, and body composition in obese hypertensive middle-aged men
263
Investigation and comparison of the electro-photo property of carbon-rich chain and cycle compounds
264
Investigation and comparison of the physical models performance of energy extraction from salinity gradient (PRO and RED) in Arvand river estuary
265
Investigation and Comparison of the Suitability and Usability of Fatty Acids and the Lipid Quality Index parameters in Waste Skin and Bones of Some Cultured Fish
266
investigation and comparison of three popular ultrasonic generators (pzt, pvdfemfi) for employing in acoustic scaling
267
Investigation and Comparison of Volume and Chemical Compositions of Ferula assa-foetida L. Root Essential Oil under Farm and Natural Habitat Conditions
268
Investigation and confirmation of differentially expressed miRNAs, as well as target gene prediction in papillary thyroid cancer, with a special emphasis on the autophagy signaling pathway
269
Investigation and Congestion Management to Solve the Over-Load Problem of Shiraz Substation in FREC
270
Investigation and conservation of artificial stone facades of the early XX century: A case study
271
Investigation and control of an RSV cluster in a 26-bed level II/III nursery using electronic surveillance methods
272
Investigation and control of microcracks in tin oxide gas sensing thin-films
273
Investigation and Control of Unstable Chaotic Behavior Using of Chaos Theory in Electrical Power Systems
274
Investigation and control of vortex-induced vibration of twin box girders
275
Investigation and demonstration of the durability of air plasma pre-treatment on polypropylene automotive bumpers
276
Investigation and design optimization of exhaust-based thermoelectric generator system for internal combustion engine
277
Investigation and determination of land use effects on surface water quality in semi-arid areas: Case study on Qarasu River in Iran
278
Investigation and Determination of the Presence of Resveratrol in the Leaves of 99 Grapevine Varieties from the Western Anatolia Region in Turkey
279
Investigation and Determination the Binding Site of Glycyrrhizin of Liquorice to DNA
280
Investigation and Determination the Binding Site of Glycyrrhizin of Liquorice to DNA
281
Investigation and development of microchannel plate phototubes
282
Investigation and development of microchannel plate phototubes
283
Investigation and estimation of emission sources of 54 volatile organic compounds in ambient air in Tokyo
284
Investigation and Evaluation of Low Cost Depth Sensor System Using Pressure Sensor for Unmanned Underwater Vehicle
285
Investigation and Evaluation of Potential Options to Determine the Methane Gas
286
Investigation and evaluation of Spiritual Intelligence: A Demographic Approach
287
Investigation and evaluation of structural color of TiO2 coating on stainless steel
288
Investigation and Evaluation of the Ecological Architecture Components from the Perspective of Designers and Special Users in Multi-Functional Buildings Case Study: Padideh Complex of Mashhad City
289
Investigation and evaluation of the Gorleben site: a status report Original Research Article
290
Investigation and evaluation of the NOx/O3 photochemical steady state
291
Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables
292
Investigation and FEM-based simulation of tool wear in turning operations with uncoated carbide tools
293
Investigation and Follow-up of Brucellosis in Seropositive Patients and Their Families in Hamadan Province, Iran
294
Investigation and identification of social harms in the new city of Sahand, Tabriz (With emphasis on Mehr housing)
295
Investigation and Identification of Types and Amounts of Heavy Metals in Soil of an Industrial Area
296
Investigation and Identification of Variables of Cost and Time Affecting International Freight Transportation in the International North-South Transit Corridor (INSTC)
297
Investigation and improvement of ejector refrigeration system using computational fluid dynamics technique
298
Investigation and improvement of equations of state for Lennard-Jones fluid
299
Investigation and improvement of multi-layer perceptron neural networks for credit scoring
300
Investigation and improvement of sensitivity computation using the area-fraction weighted fixed grid FEM and structural optimization
301
Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium-ion batteries
302
Investigation and in situ visualisation of interfacial interactions of thermophilic microorganisms with metal-sulphides in a simulated heap environment
303
Investigation and interpretation of band broadening in size exclusion chromatography
304
Investigation and Measurement of Ash Content of Coal in Zirab Coal Mine-Iran Using Dual Energy y-Ray and X-Ray Fluorescence Methods
305
Investigation and medical management of trigeminal neuralgia byconsultant oral and maxillofacial surgeons in the British Isles
306
Investigation and mitigation of harmonic amplification problems caused by single-tuned filters
307
Investigation and modeling effective parameters influencing the size of BSA protein nanoparticles as colloidal carrier
308
Investigation and modeling of biomass decay rate in the dark and its potential influence on net productivity of solar photobioreactors for microalga Chlamydomonas reinhardtii and cyanobacterium Arthrospira platensis
309
Investigation and modeling of the anomalous yield point phenomenon in pure tantalum
310
Investigation and modeling on protective textiles using artificial neural networks for defense applications
311
Investigation and Modeling the Effect of Different Filler Materials on the Sound Absorption Properties of Double Base Persian Rugs
312
Investigation and modelling of damping in a plate with a bonded porous layer
313
Investigation and modelling of the progression of zinc leaching from large sphalerite ore particles
314
INVESTIGATION AND MODELLING OF THE WALL PRESSURE FIELD BENEATH A TURBULENT BOUNDARY LAYER AT LOW AND MEDIUM FREQUENCIES
315
Investigation and numerical modelling of roof drainage systems under extreme events
316
Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior
317
Investigation and Optimization of Air Pollution Risk by a Multi-criteria Decision Making Method Using Fuzzy TOPSIS: A Case Study of Construction Workers
318
Investigation and optimization of composting processes—test systems and practical examples
319
Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM
320
Investigation and Optimization of EDM Milling and its Comparison with Die Sink EDM
321
Investigation and optimization of formulation factors of a hydrogel network based on kappa carrageenan–pregelatinized starch blend using an experimental design
322
Investigation and optimization of heat transfer coefficient of MWCNTs-Water nanofluids in a plate heat exchanger
323
Investigation and optimization of nanostructured TiO2 photoelectrode in regard to hydrogen production through photoelectrochemical process
324
Investigation and optimization of particle dimensions for needle trap device as an exhaustive active sampler
325
Investigation and Optimization of Textured Water-lubricated Journal Bearings Using Multi-objective Optimization
326
Investigation and optimization of the effect of input parameters on output parameters of electrical discharge machining of A356 nano-composite reinforced by SiC
327
Investigation and optimization of the novel UASB–MFC integrated system for sulfate removal and bioelectricity generation using the response surface methodology (RSM)
328
Investigation and Optimization of Tribological Aspects of Babbitt-Ilmenite Composite using Weighted Grey Relation Analysis
329
Investigation and Optimization of Wave Suppression Baffles in Automobile Integrated Water Tanks
330
Investigation and Optimization on Effective Parameters of a H-Rotor Darrieus Wind Turbine, Using CFD Method
331
Investigation and performance tests of a new parallel plate ionization chamber with double sensitive volume for measuring diagnostic X-rays
332
Investigation and performance tests of a new parallel plate ionization chamber with double sensitive volume for measuring diagnostic X-rays
333
Investigation and Possibility of Applying Gas Injection Method to Increase Pressure in Well A in one of the South Iranian Oil Fields
334
Investigation and prediction of chip geometry in diamond turning
335
Investigation and prediction of slug frequency in gas/liquid horizontal pipe flow
336
Investigation and prevention of deck galloping oscillation with computational and experimental techniques
337
Investigation and Prioritization of Factors Affecting Implementation of Student Sports Development Health Strategies
338
Investigation and Prioritization of Promotion among Retailers by AHP method - Case study: Ice cream industry
339
Investigation and Prioritization of Social Entrepreneurship Components based on Tourism Industry Development Approach using TOPSIS Technique
340
INVESTIGATION AND PROBABLE SOLUTION OF LOW END TORQUE DIP PROBLEM OF CAMPRO 1.6L ENGINE
341
Investigation and Production of Thyme Essential Oil Nanoemulsion Using Chitosan-Zein Pickering Emulsion Method by Nano Spray Drying Mechanism
342
Investigation and quantification of prevalent risk factors for the introduction of avian influenza in European poultry farms
343
Investigation and Ranking of the Effect of Biodiesel Produced from Safflower Oil by the Hydrodynamic Method in Diesel Generator Engine Using TOPSIS Method
344
Investigation and realization of efficient regimes of treating basic-oxygen steel with flux-cored electrode wire
345
Investigation and remediation of active-clay contaminated sepiolite drilling muds
346
Investigation and remediation of false topographic perception phenomena observed on Chang’E-1 lunar imagery
347
Investigation and scale-up of hot-melt coating of pharmaceuticals in fluidized beds
348
Investigation and Selection Index for Drought Stress
349
Investigation and Selection of Optimal and Suitable Locations for Arsenal Camouflage using Remote Sensing Studies (Case Study: Iran)
350
Investigation and Selection of the Most Efficient Method of Citizenship Education for Household Waste Source Separation Based on the KHANFAHP Model
351
Investigation and sensitivity analysis of a mechanistic phytoplankton model implemented in a new modular numerical tool (Eco3M) dedicated to biogeochemical modelling
352
Investigation and simulation of a cross-flow air classifier
353
Investigation and Simulation of Different Medical Image Processing Algorithms to Improve Image Quality Using Simulink MATLAB
354
Investigation and Simulation of Fields in Large Salient-Pole Synchronous Machines With Skewed Stator Slots
355
Investigation and Simulation of Gamma-Neutron Shielding for Nuclear- Pumped Lasers
356
Investigation and Simulation of Recombination Models in Virtual Organic Solar Cell
357
Investigation and Simulation of the Effects of Dispersion and Transmittance angles on the Solar Cells Quantum Efficiency
358
Investigation and study of the electrical characteristics of anodic oxide films SiO2 annealed at various temperatures
359
Investigation and Study of the Heat Recovers System by Using a Heat Pipe
360
investigation and synthesis of fe doped al_2 o_3 nanoparticles by co-precipitation and sol gel methods
361
Investigation and treatment of the aluminizing process for mirrors of astronomical telescopes and optical instruments of space vehicles
362
INVESTIGATION AND UTILISATION OF A HYBRID HEATING SYSTEM OF BIOMASS BURNING ASSISTED SOLAR ENERGY FOR SWEET COLOURED PEPPERS GREENHOUSE
363
Investigation and validation of technological learning versus market performance
364
Investigation and verification of a cascade double Γ-CL current source resonant inverter
365
Investigation and zoning of atmospheric hazards in Kermanshah province in the west of Iran
366
Investigation Arabic Speech Recognition Using CMU Sphinx System
367
Investigation Benzene emission from Gas Stations in Tehran’s 22 Districts and its Modeling in Regions with the Highest Emission Levels
368
Investigation Biosorption Potential of Copper and Lead from Industrial Waste-Water Using Orange and Lemon Peels
369
Investigation by 3D FE simulations of delamination crack initiation in TBC caused by alumina growth
370
Investigation by atomic force microscopy of forces at the origin of cement cohesion
371
Investigation by atomic force microscopy of forces at the origin of cement cohesion
372
Investigation by atomic force microscopy of forces at the origin of cement cohesion
373
Investigation by dielectric spectroscopy of domain motions in lysozyme: effect of solvent and binding of inhibitors
374
Investigation by EELS and TRIM simulation method of the interaction of Ar+ and N+ ions with the InP compound
375
Investigation by experimental design and regression models of the effect of five experimental factors on ion-interaction high-performance liquid chromatographic retention
376
Investigation by ICP-MS of trace element levels in vegetable edible oils produced in Spain
377
Investigation by impedance and 19F-NMR spectroscopies of a new oxyfluoride solid solution range in the NaF–BiF3–Bi2O3 system
378
Investigation by laser induced breakdown spectroscopy, X-ray fluorescence and X-ray powder diffraction of the chemical composition of white clay ceramic tiles from Veliki Preslav
379
Investigation by multivariate analysis of groundwater composition in a multilayer aquifer system from North Africa: A multi-tracer approach
380
Investigation by γ-ray diffraction of the crystalline quality of GaAs and InP single crystals
381
Investigation changes sea level of Caspian Sea on Guilin’s Coastlines in Iran
382
Investigation Clinical Competence and Its Relationship with Professional Ethics and Spiritual Health in Nurses
383
Investigation concerning the cavitation resistance of TiN coatings deposited on austenitic stainless steel at various temperatures
384
Investigation corporate governance characteristics on risk taking: A case study of private banks listed in Tehran Stock Exchange
385
Investigation diffusion mechanism of β-lactam conjugated telechelic polymers of PEG and β-cyclodextrin as the new nanosized drug carrier devices
386
Investigation diffusion mechanism of β-lactam conjugated telechelic polymers of PEG and β-cyclodextrin as the new nanosized drug carrier devices
387
Investigation Effect of Different Amount and Time of Apply a Bio-Regulator on Growth Indices of Vicia faba L.
388
Investigation Effect of Different Irrigation Regime and Super Absorbent Polymer on Seed Yield and Morphological Traits of Maize (Zea mays L.)
389
Investigation Effect of Different Level of Vermicompost and Manure on Seed Yield and Its Components of Cowpea (Vigna unguiculata L.)
390
Investigation effect of nanoparticle mean diameter on mixed convection Al2O3-water nanofluid flow in an annulus by two phase mixture model
391
Investigation effect of the vortex tube structure with 60 and 90 degree angles to Sedimentation entrancetrap efficiency to intake at 180 degree bend location
392
Investigation Effective Parameters Of a Diffusion Absorption Refrigeration Cycle Coupled with a Solar Parabolic Collector
393
Investigation Effects of Magnetetic Impurity Doping on Average Magnetization ofSemiconducting Carbon Nanotubes
394
Investigation efficiency of nano photocatalytic compound of TiO2 and rice husk silica in removal of reactive red 198 dye from synthetic aqueous solutions
395
Investigation Emptying& Discharge Coefficient Function of Semi short through Shaft Spill way by considering Stepped barrel and vortex breaker on crest
396
Investigation experiences of hypertensive patients
397
Investigation Experimental and Finite Element Method of Mechanical Properties of Hot Forging on Ti6Al4V Alloy
398
Investigation extrusion ratio effect on mechanical behaviour of extruded alloy AA-6063
399
Investigation factors affecting the first recurrence of coronary artery disease in patients undergone angioplasty using cox survival model
400
Investigation flora and Distribution of weed species of field peas (Cicer arietinum L.) in Khorramabad
401
Investigation for an Approach to Optimise the Structure of Human Force
402
Investigation for convective heat transfer on grinding work-piece surface subjected to an impinging jet
403
Investigation for existence alkaloid in Achillea wilhelmsii C.Koch and its qualitative comparison to Achillea millefolium
404
Investigation for mediastinal disease in patients with apparently operable lung cancer
405
Investigation for optimal performance of a photovoltaic (PV) powered clinic Original Research Article
406
Investigation for possible source(s) of contamination of ready-to-eat meat products with Listeria spp. and other pathogens in a meat processing plant in Trinidad Original Research Article
407
Investigation for probabilistic prediction of shear strength properties of clay-rich fault gouge in the Austrian Alps
408
Investigation for recrystallization behavior of shot peened layer on TiB2/6351Al composite using X-ray diffraction
409
Investigation for Synchronization of a Rotor-Pendulum System considering the Multi-DOF Vibration
410
Investigation for the deformation of embankment underlain by warm and ice-rich permafrost
411
Investigation for the optimal thermohydraulic performance of artificially roughened solar air heaters
412
Investigation for ultrasonic machining of titanium and its alloys
413
Investigation for warm peening of TiB2/Al composite using X-ray diffraction
414
Investigation Germination Characteristics of Wheat (Triticum aestivum L., cv. Chamran) in Response to Seed Aging
415
Investigation Giant Placental Chorioangioma Associated with Neonatal Sepsis-like Disease: A Case Report
416
Investigation Giant Placental Chorioangioma Associated with Neonatal Sepsis-like Disease: A Case Report
417
Investigation Growth Indices Analysis and Sorghum (Sorghum bicolor L.) Crop Production Affected Different Level of Nitrogen and Nitroxin Bio-Fertilizer
418
Investigation Healing Effects of Isgın and Dandelion against of Doxorubicin-Induced Toxicity in D. melanogaster
419
Investigation Health-promoting lifestyle of Patients undergoing coronary artery graft surgery
420
Investigation hydrogen-bonding capabilities of modified amide groups using calculated nuclear quadruple coupling constants
421
Investigation hydrologic scaling: Observed effects of heterogeneity and nonlocal processes across hillslope, watershed, and regional scales
422
Investigation in electroless Ni–P–Cg(graphite)–SiC composite coating
423
Investigation in expression of key genes involved in sanguinarine biosynthetic pathway in Papaver genus under drought and salinity
424
Investigation in hydrated thorium phosphates by NMR I-relation proton phosphorus
425
Investigation in mechanistic issues of sonocatalysis and sonophotocatalysis using pure and doped photocatalysts
426
Investigation in mechanistic issues of sonocatalysis and sonophotocatalysis using pure and doped photocatalysts
427
Investigation in orthogonal turn-milling towards better surface finish
428
Investigation in permanence of the concept of Chalipa(cross) in Iranian Architectural patterns
429
Investigation in solid–liquid extraction: influence of ultrasound
430
Investigation in tea on fate of fenazaquin residue and its transfer in brew
431
Investigation in tea on fate of fenazaquin residue and its transfer in brew
432
Investigation in the coupling of zirconocene complexes and trimethylsilyl(diphenylphosphino)acetylene. P–C bond cleavage chemistry from protonolysis reactions
433
Investigation in the far field characteristics of TM polarized Gaussian beam from the vectorial structure
434
Investigation in the Ga-rich side of the Mn–Ga system: Synthesis and crystal structure of MnGa4 and MnGa5−x (x ∼ 0.15)
435
Investigation in thorium phosphate by NMR II-phosphorus dipolar networks
436
Investigation in to Properties of Polyurethane Closed Cell by High Loading of SiO2 Nanoparticles
437
Investigation In Vitro Expression of CatSper Sub Fragment followed by Production of Polyclonal Antibody: Potential andidate for The Next Generation of Non Hormonal Contraceptive
438
Investigation Integrated Effect of Fertilizer and Biofertilizer (Nitrogen and Phosphorus) on Wheat (Triticum aestivum L.) Crop Production
439
Investigation into a catalytically controlled reaction gasifier (CCRG) for coal to hydrogen
440
Investigation into a new hybrid forming process: Incremental sheet forming combined with stretch forming
441
Investigation into absorption of the incident laser beam during Nd:YAG laser processing of metals
442
Investigation into adhesive wear of PVD coated and uncoated hot stamping production tools
443
Investigation into alternative sugars as potential carriers for dry powder formulation of budesonide
444
Investigation into alternative water treatment technologies for the treatment of underground mine water discharged by Grootvlei Proprietary Mines Ltd into the Blesbokspruit in South Africa
445
Investigation into an accident caused by falling formwork using numerical dynamic simulation
446
Investigation into an artificial neural network based on-line current controller for an HVDC transmission link
447
Investigation into an efficient synthesis of 2,3-dehydro-N-acetyl neuraminic acid leads to three decarboxylated sialic acid dimers
448
Investigation into and Analysis on Middle School English Teachers’ Competencies
449
Investigation into anti-airborne infection performance of stratum ventilation
450
Investigation into approaches to reduce excessive vertical transport over complex terrain in a regional photochemical grid model
451
Investigation into atmospheric deposition through precipitation studies at New Delhi (India)
452
Investigation into bond behaviour of a new CFRP anchorage system for concrete utilising a mechanically strengthened substrate
453
Investigation into cadmium embrittlement of landing gear wheel axles
454
Investigation into calibration of discrete element model parameters for scale-up and validation of particle–structure interactions under impact conditions
455
Investigation into capital costs of HVAC systems
456
Investigation into causes of in-place rutting in asphalt pavement
457
Investigation into CFRP laminate anchorage systems utilising bi-directional fabric wrap
458
Investigation into CFRP plate end anchorage utilising uni-directional fabric wrap
459
Investigation into changes in blood transfusion indicators and returning blood products along with the cause of returning and cost calculation
460
Investigation into Channel Angular Extrusion and the UREAD energy absorption technique
461
Investigation into Channel Angular Extrusion and the UREAD energy absorption technique
462
Investigation into classification/sourcing of suspect counterfeit Heptodin™ tablets by near infrared chemical imaging Original Research Article
463
Investigation into CO2 laser cleaning of titanium alloys for gas-turbine component manufacture
464
Investigation into cold extrusion of aluminum billets using three-dimensional finite element method
465
Investigation into cold recycled materials: Influence of rejuvenant, mix design procedure and effects of temperature on compaction
466
Investigation into compound CaSO4 oxygen carrier for chemical-looping combustion
467
Investigation into compressive properties of liquid shim for aerospace bolted joints
468
Investigation into conductivity of silver-coated cenosphere composites prepared by a modified electroless process
469
Investigation into contamination of processed fruit products by carbendazim, methyl thiophanate and thiabendazole
470
Investigation into crack initiation from corrosion pit in 7075-T6 under ambient laboratory and saltwater environments
471
Investigation into defects occurring on the polymer surface during the photolithography process
472
Investigation into dizziness before and after Epleyʹs maneuver for benign paroxysmal positional vertigo using stabilometry
473
Investigation into early fatigue damage in electrodeposited copper
474
Investigation into Effect of Liquefaction on Behavior of Retaining Wall
475
Investigation into effect of rubber bushing on stress distribution and fatigue behaviour of anti-roll bar
476
Investigation into effects and interaction of various fretting fatigue variables under slip-controlled mode
477
Investigation into effects of electron transporting materials on organic solar cells with copper phthalocyanine/C60 heterojunctions
478
Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti–6Al–4V
479
Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti–6Al–4V
480
Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti–6Al–4V
481
Investigation into equal channel angular extrusion process of billet with internal defects
482
Investigation into experiences ofolder students undertaking a Pre-registration Diploma in Nursing
483
Investigation into factors affecting roadway deformation in the Selby coalfield
484
Investigation into fibre composites jacket with an innovative joining system
485
Investigation into FRP repaired RC columns
486
Investigation into fuel pin reshuffling options in PWR in-core fuel management for enhancement of efficient use of nuclear fuel
487
Investigation into fundamental properties of bituminous plug expansion joint filling mixtures containing rubber granules
488
Investigation into gas–solid heat transfer in a cryogenic vibrated fluidised bed
489
Investigation into higher-order mode propagation through orifice plates in circular ducts
490
Investigation into high-pressure behavior of MnTiO3: X-ray diffraction and Raman spectroscopy with diamond anvil cells
491
Investigation into hot-mix asphalt moisture-induced damage under tropical climatic conditions
492
Investigation into hydrodynamic deep drawing assisted by radial pressure: Part I. Experimental observations of the forming process of aluminum alloy
493
Investigation into hydrodynamic deep drawing assisted by radial pressure: Part II. Numerical analysis of the drawing mechanism and the process parameters
494
Investigation into hydrolysis and alcoholysis of sodium borohydride in ethanol–water solutions in the presence of supported Co–Ce–B catalyst
495
Investigation into hydromechanical deep drawing of aluminum alloy—Complicated components in aircraft manufacturing
496
Investigation into immobilisation of lactate oxidase to improve stability
497
Investigation into impact of tropical cyclones on the ionosphere using GPS sounding and NCEP/NCAR Reanalysis data Original Research Article
498
Investigation into issues of passenger egress in Ladbroke Grove rail disaster
499
Investigation into laminate design of open carbon–fibre/epoxy sections by quasi–static and dynamic crushing
500
Investigation into Learning Strategies and Delexical Verb Use by Thai EFL Learners
501
Investigation into Learning Strategies and Delexical Verb Use by Thai EFL Learners
502
Investigation into Lubliner yield criterion of concrete for 3D simulation
503
Investigation into luminescent dynamics in solid-state cathodoluminescence structure
504
Investigation into Mall Visitation Motivation and Demographic Idiosyncrasies in Ghana
505
Investigation into material optimization and development for improved ravelling resistant porous asphalt concrete
506
Investigation into Mechanism of Hydrogen Induced Cracking Failure in Carbon Steel: A Case Study of Oil and Gas Industry
507
Investigation into microstructural properties of fluorapatite Nd-YAG laser clad coatings with PVA and WG binders
508
Investigation into microstructure and mechanical properties of NiAl-Mo composites produced by directional solidification
509
Investigation into microstructure of carbon nanotube multi-yarn
510
Investigation into nanocellulosics versus acacia reinforced acrylic films
511
Investigation into new anticonvulsant derivatives of α-substituted N-benzylamides of γ-hydroxy- and γ-acetoxybutyric acid. Part 5: Search for new anticonvulsant compounds Original Research Article
512
Investigation into nitrogen–inert gas interactions in d.c. diode glow discharges
513
Investigation into nonlinear vibrations of composite plates using the R -function theory
514
Investigation into occurring dynamic strain aging in hot rolling of AA5083 using finite elements and stream function method
515
Investigation into opportunities and challenges of cross-border electricity trade in Iran
516
Investigation into optimising high switching frequency regular sampled PWM control for drives and static power converters
517
Investigation into performance of a heat pipe with micro grooves fabricated by extrusion–ploughing process
518
Investigation into Pilot Handling Qualities in Teleoperation Rendezvous and Docking with Time Delay
519
Investigation into piston-slap-induced vibration for engine condition simulation and monitoring
520
Investigation into plastic damage behavior of the CO2 laser deep penetration welded joint for Ti–6Al–4V alloy
521
Investigation into preferential flow in natural unsaturated soils with field multiple-tracer infiltration experiments and the active region model
522
Investigation into real-time pressure sensing properties of SnO2, TiO2, and TiO2/ZnO thick films with interdigitated electrodes
523
Investigation into relations among technological properties, hydration kinetics and early age hydration of self-leveling underlayments
524
Investigation into selective debenzylation and ring cleavage of quinazoline based heterocycles
525
Investigation into Self-calibration Methods for the Vexcel UltraCam D Digital Aerial Camera
526
Investigation into Self-regulation, Engagement in Learning Mathematics and Science and Achievement among Bahrain Secondary School Students
527
Investigation into sheet hydroforming based on hydromechanical deep drawing with uniform pressure on the blank
528
Investigation into skill leveled operators in a multi-period cellular manufacturing system with the existence of multi-functional machines
529
Investigation into socketed CDM (SDM) tester parasitics
530
Investigation into socketed CDM (SDM) tester parasitics
531
Investigation into some surface characteristics of electrical discharge machined SKD-11 using powder-suspension dielectric oil
532
Investigation into sorption processes in the anodic stripping voltammetric speciation of Cu in natural waters Original Research Article
533
Investigation into space charge effects in I–V characteristics of multi-layer semiconductor thermionic devices
534
Investigation into stability and interfacial properties of hydrate–aqueous fluid system
535
Investigation into stiffness degradation progress in glass/vinylester laminated beams under large deformations
536
Investigation into stress states in porous asphalt concrete on the basis of FE-modelling
537
Investigation into sulfur release in reductive decomposition of calcium sulfate oxygen carrier by hydrogen and carbon monoxide
538
INVESTIGATION INTO SYNERGISTIC EFFECT OF MOLYBDATE AND PHOSPHATE AS AN INHIBITOR FOR MILD STEEL CORROSION PREVENTION IN SIMULATED COOLING WATER
539
Investigation into the absolute stereochemistry of the marine sponge alkaloid pyrinodemin A
540
Investigation into the Aerodynamic Performance of a Concept Sports Car
541
Investigation into the affect of cementing techniques on load transfer in the resurfaced femoral head: A multi-femur finite element analysis
542
Investigation into the Antibacterial Activity of Metal Complexes Derived from Substituted Chromone in Comparison with Tetracycline, and Cephradine as Standard Drugs against Escherichia coli and Staphylococcus aureus
543
Investigation into the antibacterial activity of monodisperse BSA-conjugated zinc oxide nanoparticles
544
Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids)
545
Investigation into the application of cross-correlation analysis on acoustic backscattered signals from suspended sediments to measure nearbed current profiles
546
Investigation into the behavior of metal-argon polyatomic ions (MAr+) in the extraction region of inductively coupled plasma-mass spectrometry
547
Investigation into the behavior of metal-argon polyatomic ions (MAr+) in the extraction region of inductively coupled plasma-mass spectrometry
548
Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact
549
Investigation into The Behavior of Nano-composite Tubes at Ballistic Impact
550
Investigation into the behaviour of a support system and roof strata during sublevel caving of a thick coal seam
551
Investigation into the benzene and toluene content of soft drinks
552
Investigation into the biological activities and chemical composition of Calendula officinalis L. growing in Tunisia
553
Investigation into the biological stability of collagen/chondroitin-6-sulphate gels and their contraction by fibroblasts and keratinocytes: the effect of crosslinking agents and diamines
554
Investigation into the Causes of Delays and Cost Overruns in Uganda s Public Sector Construction Projects
555
Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted Fabric Using Finite Element Method
556
Investigation into the desulphurization properties of by-products of the manufacture of white marbles of Northern Tuscany
557
Investigation into the detection of marker movement by biplanar RSA
558
Investigation into the deterioration in storage characteristics of nickel-metal hydride batteries during cycling
559
Investigation into the determination of trimethylarsine in natural gas and its partitioning into gas and condensate phases using (cryotrapping)/gas chromatography coupled to inductively coupled plasma mass spectrometry and liquid/solid sorption techniques
560
Investigation into the determination of trimethylarsine in natural gas and its partitioning into gas and condensate phases using (cryotrapping)/gas chromatography coupled to inductively coupled plasma mass spectrometry and liquid/solid sorption techniques
561
Investigation into the Difficulties of Palestinian EFL Learners in Learning Intonation in Written and Spoken Context
562
Investigation into the distribution of ink components on printed coated paper: Part 1: optical and roughness considerations
563
Investigation into the distribution of ink components throughout printed coated paper: Part 2: Utilising XPS and SIMS
564
Investigation into the Dyeing of Soybean Fibers with Natural Dyes and their Antimicrobial Properties
565
Investigation into the effect of bed stiffness on seismic performance of concrete gravity dam under far and nearfield earthquakes
566
Investigation into the effect of carboxylic acid monomer on particle nucleation and growth in emulsifier-free emulsion copolymerization of styrene–butadiene–acrylic acid
567
Investigation into the effect of intake port geometric parameters and blockage on flow coefficient and in-cylinder flow: application to engine port design
568
Investigation into the effect of nano-silica on the protective properties of polyurethane coatings
569
Investigation into the Effect of Photodynamic Therapy and Cisplatin on the Cervical Cancer Cell Line (A2780)
570
Investigation into the effect of simulating a 3D cylindrical fluidized bed reactor on a 2D plane
571
Investigation into the Effect of Stock Liquidity on Excess Financial Leverage Emphasizing the Moderating Role of Institutional Shareholders
572
Investigation into the effect of the intermediate carbon carrier on the catalytic activity of the HDS catalysts prepared using heteropolycompounds
573
Investigation into the effect of tillage on solute movement to drains through a heavy clay soil. I. Lysimeter experiment
574
Investigation into the effect of tillage on solute movement to drains through a heavy clay soil. II. Interpretation using a radio-scanning technique, dye-tracing and modelling
575
Investigation into the effect of transformer oil on polymers
576
Investigation into the effect of ultrasound on the dimerization of pivalic acid using Fentonʹs reagent
577
Investigation into the effect of ultrasound on the dimerization of pivalic acid using Fentonʹs reagent
578
Investigation into the Effect of UV/Ozone Irradiation on Dyeing Behaviour of Poly(Lactic Acid) and Poly(Ethylene Terephthalate) Substrates
579
Investigation into the effect of varus–valgus orientation on load transfer in the resurfaced femoral head: A multi-femur finite element analysis
580
Investigation into the Effective Factors Involved in Personal Brand Equity of University Professors
581
Investigation into the effectiveness of heat pump assisted clothes dryer for humid tropics
582
Investigation into the effects of drilling parameters on delamination by various step-core drills
583
Investigation into the effects of Fe additions on the equilibrium phase compositions, phase fractions and phase stabilities in the Ni–Cr–Al system Original Research Article
584
Investigation into the Effects of Nanoparticle Size and Channel Depth on the Thermophysical Properties of Water Nanofluids in the Nanochannel Using Molecular Dynamics Simulation
585
Investigation into the effects of petalling on coefficient of discharge during compartment flooding
586
Investigation into the effects of proteins and lipids on the frictional properties of articular cartilage
587
Investigation into the effects of temperature and stirring rate on the solid-phase extraction of diuron from water using a C18 extraction disk
588
INVESTIGATION INTO THE EFFECTS OF THE USE OF LEARNING STYLES ON STUDENTS’ LEARNING LEVELS IN SOCIAL STUDIES TEACHING
589
Investigation into the effects of weld zone and geometric discontinuity on the formability reduction of tailor welded blanks
590
Investigation into the electromechanical coupling unstability of a rolling mill
591
Investigation into the enantioselection mechanism of ruthenium–arene–diamine transfer hydrogenation catalysts using fluorinated substrates
592
Investigation into the energy dissipation of a lap joint using the one-dimensional microslip friction model
593
Investigation Into the Equivalent Circuit of MOV and the Determination of Its Parameters
594
Investigation into the evolution of char structure using Raman spectroscopy in conjunction with coal petrography; Part 1
595
Investigation into the extraction speciation of rare-earth radioisotopes from aqueous solution using polyoxometalates
596
Investigation into the failure of Inconel exhaust collector produced by laser consolidation
597
Investigation into the feasibility of viscoelastically generated pre-stress in polymeric matrix composites
598
Investigation into the feasibility of viscoelastically generated pre-stress in polymeric matrix composites
599
Investigation into the flotation response of a sulphide ore to depressant mixtures
600
Investigation into the formation of 13-6 helical multi-shell gold nanowires
601
Investigation into the forming of a complex cup locally constrained by a round die based on an innovative hydromechanical deep drawing method
602
Investigation into the frequency of Helicobacter pylori infection with carbon 14 urea breath test in patients with vitiligo
603
Investigation into the gelation and crystallization of polyacrylonitrile
604
Investigation into the Geometrical Loop Effect on Tensile Behavior of Single Bar Warp-Knitted Fabric Using Finite Element Method
605
Investigation into the heap leaching of copper ore from the Disele deposit
606
Investigation into the hot workability of the as-extruded WE43 magnesium alloy using processing map
607
Investigation into the impact of the use of 2D/3D digital models on the numerical calculation of the bituminous composites’ complex modulus
608
Investigation into the impacts of land-use change on sediment yield characteristics in the upper Huaihe River basin, China
609
Investigation into the improvement of welding strength in three-dimensional extrusion of tubes using porthole dies
610
Investigation into the in-box LOCA consequence and structural integrity of the KO HCCR TBM in ITER
611
Investigation into the influence of buffer and nitrided layers on the initial stages of GaN growth on InSb 100/
612
Investigation into the interaction between quartz nanostructures and human cell lines for tissue engineering
613
Investigation into the interactions between Bi2O3-doped ZnO and AgPd electrode
614
Investigation into the interference potential of spread-spectrum clock generation to broadband digital communications
615
Investigation into the long-term metabolic effects of aripiprazole adjunctive to lithium, valproate, or lamotrigine
616
Investigation into the loosening mechanism of bolt in curvic coupling subjected to transverse loading
617
Investigation into the mechanism of lithiation of 2,3-dihydrooxepin
618
Investigation into the mechanism of NiMg(Ca)bAlcOx catalytic activity for production of solarised syngas from carbon dioxide reforming of methane
619
Investigation into the mechanism of stimulation by low-concentration stressors in barley seedlings
620
Investigation into the mechanism of λmax shifts and their dependence on pH for the 2-hydrazinopyridine derivatives of two copper amine oxidases
621
Investigation into the mechanisms by which microwave heating enhances separation of water-in-oil emulsions
622
Investigation into the mechanisms leading to explosion of pétanque balls
623
Investigation into the mechanisms of heavy oil recovery by novel alkaline flooding
624
Investigation into the mechanisms of pipeline transport of slurries of wheat straw and corn stover to supply a bio-refinery
625
Investigation into the microstructure and mechanical properties of diffusion bonded TiAl alloys
626
Investigation into the microstructure evolution caused by nanoscratch-induced room temperature deformation in M-plane sapphire Original Research Article
627
Investigation into the mineralogy and flotation performance of oxidised PGM ore
628
Investigation into the modelling of field-effect carrier mobility in disordered organic semiconductors
629
Investigation into the musculoskeletal disorders prevalence and postural assessment among barbers in Sari-2016
630
Investigation into the nature of historical tapestries using time of flight secondary ion mass spectrometry (ToF-SIMS)
631
Investigation into the optimization control technique of hydrogen-fueled engines based on genetic algorithms
632
Investigation into the optoelectrical properties of tungsten oxide thin films annealed in an oxygen air
633
Investigation into the parameters of influence on dust cake porosity in hot gas filtration
634
Investigation into the performance of a Co–Mo based sour shift catalyst using simulated coal-derived syngases
635
Investigation into the Performance of a MIMO System Equipped with ULA or UCA Antennas: BER, Capacityand Channel Estimation
636
Investigation into the Phase Change of Refrigerant in a Wire-and-Tube Condenser of a Refrigerator
637
Investigation into the phenomenological aspects of the grinding process
638
Investigation into the photo-induced change in wettability of hydrophobized TiO2 films
639
Investigation into the physical and chemical properties of sodium caseinate-maltodextrin glyco-conjugates
640
Investigation into the physical characteristics of active matrix flat panel imagers for radiotherapy
641
Investigation into the prediction accuracy of photocephalometry for skeletal Class III adult female patients treated with two-jaw surgery
642
Investigation into the preferred conformation of gabapentin for interaction with its binding site on the α2δ subunit of a calcium channel
643
Investigation into the pre-formingʹs effect during multi-stages of tube hydroforming of aluminum alloy tube by using useful wrinkles
644
Investigation into the presence of genotype by environment interactions (G ×E) in Scottish Blackface lamb traits
645
Investigation into the properties of CdTe detectors for in-situ measurements
646
Investigation into the properties of CdTe detectors for in-situ measurements
647
Investigation into the properties of titanium based films deposited using pulsed magnetron sputtering
648
Investigation into the pumping characteristics of ITER cryopumps
649
Investigation into the rapid compression of semi-solid alloy slugs
650
Investigation into the reaction of (t-BuC5H4)2Nb(η2-Te2)H with CH3Li: Hydride abstraction versus telluride methylation
651
Investigation into the reactivity of oxoniobocene complexes [Cp*2Nb(O)R] (Cp*=η5-C5Me5; R=H, OH, OMe) towards heterocumulenes: formation of carbamato and thiocarbamato complexes and catalytic cyclization of PhNCO
652
Investigation into the regioisomeric composition of some fused tetrazoles
653
Investigation into the regioisomeric composition of some fused tetrazoles
654
Investigation into the regional wrench tectonics of inner East Anatolia (Turkey) using potential field data
655
Investigation into the regioselective C-deuteriation of α-keto esters
656
Investigation into the relationship between chlorine decay and water distribution parameters using data driven methods
657
Investigation into the relationship between personality traits and OCD
658
Investigation into the relationship between personality traits and OCD: a replication employing a clinical population
659
Investigation into the relationship between the gravity vector and the flow vector to improve performance in two-phase continuous flow biodiesel reactor
660
Investigation into the relationship between the passive flexibility and active stiffness of the ankle plantar-flexor muscles
661
Investigation into the relationship of the overlap ratio and shift angle of double stage three bladed vertical axis wind turbine (VAWT)
662
Investigation into the removal of sulfur from tire derived fuel by pyrolysis
663
Investigation into the risk of exposure to antibiotic residues contaminating meat and egg in Ghana
664
Investigation into the role of cephalic stimulation of acid secretion on gastric emptying and appetite following a soup meal using the gastric acid inhibitor omeprazole
665
Investigation into the role of core industrial designers in ecodesign projects
666
Investigation into the scope and limitations of molecular imprinting with DNA molecules
667
Investigation into the scope and limitations of molecular imprinting with DNA molecules Original Research Article
668
Investigation into the seizure of hydraulic motors
669
Investigation into the selectivity of CVD iron from Fe(CO)5 precursor on various metal and dielectric patterned substrates
670
Investigation into the self-loosening behavior of bolted joint subjected to rotational loading
671
Investigation into the shape selectivity of zeolite catalysts for biomass conversion
672
Investigation into the short-term behavior of silty sand stabilized with colloidal silica
673
Investigation into the short-term behavior of silty sand stabilized with colloidal silica
674
Investigation into the sintered behavior and properties of nanostructured WC–Co–Ni–Fe hard metal alloys
675
Investigation into the structural, morphological, mechanical and thermal behaviour of bacterial cellulose after a two-step purification process
676
Investigation into the structure–activity relationship of novel concentration dependent, dual action T-type calcium channel agonists/antagonists Original Research Article
677
Investigation into the suitability of layered silicates as adsorption media for essential oils using FTIR and GC–MS
678
Investigation into the synergistic effects in ternary cementitious systems containing portland cement, fly ash and silica fume
679
Investigation into the thermal performance of recycled glass screed for construction purposes
680
Investigation into the time-dependent behaviour of reinforced concrete specimens strengthened with externally bonded CFRP-plates
681
Investigation into the Translucency of Tooth-Colored Restorative Materials
682
Investigation into the transportation and melting of thick ice slurries in pipes
683
Investigation into the use of carbon isotope ratios (13C/12C) of Scotch whisky congeners to establish brand authenticity using gas chromatography-combustion-isotope ratio mass spectrometry
684
Investigation into the use of gaseous and liquid nitrogen as a cutting fluid when turning BS 970-80A15 (En32b) plain carbon steel using WC–Co uncoated tooling
685
Investigation into the use of low cost MEMS accelerometers for vibration based damage detection
686
Investigation into the use of pyrolysis-elemental analysis for the measurement of carbohydrates in foodstuffs Original Research Article
687
Investigation into the use of solid nitrogen to create a “Thermal Battery” for cooling a portable high-temperature superconducting magnet Original Research Article
688
Investigation into the use of the CUSUM technique in identifying changes in mean air pollution levels following introduction of a traffic management scheme
689
Investigation into the Use of Urea and NPK Fertilizers in the Bioremediation of Domestic Wastewater
690
Investigation into the Vibration Characteristics and Stability of a Welded Pipe Conveying Fluid
691
Investigation into the voltammetric behaviour and detection of selenium(IV) at metal electrodes in diverse electrolyte media Original Research Article
692
Investigation into the wear behaviour of Stellite 6 during rotation as an unlubricated bearing at 600 °C
693
Investigation into the wear behaviour of Tribaloy 400C during rotation as an unlubricated bearing at 600 °C
694
Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory
695
Investigation into thermal stresses in gas turbine transition-piece: Influence of material properties on stress levels
696
Investigation into thermally activated migration of fullerene-based nanocars
697
Investigation into thermophoresis and Brownian motion effects of nanoparticles on radiative heat transfer in Hiemenz ow using spectral method
698
Investigation into three-dimensional effects of finite contact width on fretting fatigue
699
Investigation into three-layered HMA mixtures
700
Investigation into threshold stress intensity factors of materials under cyclic loading. Report 1. Methods and experimental results
701
Investigation into threshold stress intensity factors of materials under cyclic loading. Report 2. Prediction of fatigue limits and fatigue crack growth
702
INVESTIGATION INTO TIME- AND FREQUENCY-DOMAIN EMI-INDUCED NOISE IN BISTABLE MULTIVIBRATOR
703
Investigation into variations in the isomer content within the nitroaromatic component in nitroglycerine-based explosives by gas chromatography with flame ionisation detection
704
Investigation into wall wrinkling in deep drawing process of conical cups
705
Investigation into Waste Tire Rubber-Filled Concrete
706
Investigation into wear of Ti–6Al–4V under reciprocating sliding conditions
707
Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory
708
Investigation methods and handling of hazardous materials for fusion blanket applications
709
Investigation molecular mechanism of sensitive and tolerant barley cultivars under different times of salinity stress exposure using proteome analysis
710
Investigation morphological, electrical, and optical properties of Mn-doped ZnO thin film by sol–gel spin-coating method
711
Investigation Myocardial Perfusion Scan Parameters and Walls Motion in Patients undergoing Cardiac Surgery
712
Investigation Nitride layers and Properties Surfaces on Pulsed Plasma Nitrided Hot Working Steel AISI H13
713
Investigation Nitride layers and Properties Surfaces on Pulsed Plasma Nitrided Hot Working Steel AISI H13
714
Investigation of 𝑇𝐸𝑀 and SHV Beta-Lactamase Genes in Escherichia coli Isolated from Strawberry Samples in Sanandaj, Iran
715
Investigation of nuclear reaction in a cyclotron accelerator as a neutron source
716
Investigation of (5, 0) carbon nanotube-like boron structures using density functional theory
717
Investigation of (m = 2–5, n = 2–3) clusters using photoelectron spectroscopy and density functional calculations
718
Investigation of (Sr4-(delta)Ca(delta))PtO6 using X-ray Rietveld refinement
719
Investigation of (Sr4-(delta)Ca(delta))PtO6 using X-ray Rietveld refinement
720
Investigation of (Stearoyl-CoA Desaturase 1) SCD1 Gene Polymorphism in Khuzestan Buffalo Population Using PCR-RFLP Method
721
Investigation of (α, p) reactions using a radioactive beam
722
Investigation of (α, p) reactions using a radioactive beam
723
Investigation of “Condition of Consolidation” Coming from Zoning Plan
724
Investigation of
Toxoplasma gondii
Infection in Cutaneous Leishmaniasis Patients of the Isfahan Province
725
Investigation of 1,1-dichloroethene interacting with the Si(1 1 1)–7 × 7 surface studied by scanning tunneling microscopy
726
Investigation of 1,4-dioxane originating from incineration residues produced by incineration of municipal solid waste Original Research Article
727
Investigation of 1-bromo-3-buten-2-one as building block in organic synthesis
728
Investigation of 1D chain formation of CO on Pd(1 1 0) by low temperature scanning tunneling microscope
729
Investigation of 1D chain formation of CO on Pd(1 1 0) by low temperature scanning tunneling microscope
730
Investigation of 2 liquid phase separation characteristics on the iodine–sulfur thermochemical hydrogen production process
731
Investigation of 2.0 μm emission in Tm3+ and Ho3+ co-doped oxyfluoride tellurite glass
732
Investigation of 2.9 μm luminescence properties and energy transfer in Tm3+/Dy3+ co-doped chalcohalide glasses
733
Investigation of 22MnB5 formability in hot stamping operations
734
Investigation of 238U–230Th–226Ra and 232Th–228Ra–228Th radioactive disequilibria in volcanic rocks from Trindade and Martin Vaz Islands (Brazil; Southern Atlantic Ocean)
735
Investigation of 26 MHz RFQ accelerators
736
Investigation of 26 MHz RFQ accelerators
737
Investigation of 2D Materials Effect on Few-Mode Fiber Optical Temperature and Strain Sensors
738
Investigation of 2D/3D defects in controlled-growth oxygen-deficient ZnO nanowires and their field emission
739
Investigation of 2DOF FOPI controller for synchronous generator voltage stability
740
Investigation of 3,3′,5,5′-tetramethylbenzidine as colorimetric substrate for a peroxidatic DNAzyme Original Research Article
741
Investigation of 30-cell solid oxide electrolyzer stack modules for hydrogen production
742
Investigation of 3D anisotropic electrical conductivity in TIG welded 5A06 Al alloy using eddy currents
743
Investigation of 3D crack propagation problems via fast BEM formulations
744
Investigation of 3D microfabrication characteristics by focused ion beam technology in silicon
745
Investigation of 3D silvernanodendrite@glass as surface-enhanced Raman scattering substrate for the detection of Sildenafil and GSH
746
Investigation of 3-mercaptopropyltrimethoxysilane self-assembled monolayers on Au(111) surface
747
Investigation of 3T3-L1 Cell Differentiation to Adipocyte, Affected by Aqueous Seed Extract of Phoenix Dactylifera L
748
Investigation of 4,6-dimethyldibenzothiophene hydrodesulfurization over a highly active bulk MoS2 catalyst
749
Investigation of 4′-n-alkyl-4-cyanobiphenyls structure features by IR spectroscopy methods
750
Investigation of 4-Amino-3-Hydrazino-5-Mercapto- 1,2,4-Triazole as Corrosion Inhibitor for C38 Steel in Hydrochloric Acid Medium
751
Investigation of 4He3 trimer on the base of Faddeev equations in configuration space
752
Investigation of 4H–SiC Schottky diodes by ion beam induced charge (IBIC) technique
753
Investigation of 515 nm green-light emission for full color emission LaAlO3 phosphor with varied valence Eu
754
Investigation of 60Co γ-irradiated l-(−) malic acid, N-methyl-dl-valine and l-glutamic acid γ-ethyl ester by electron paramagnetic resonance technique
755
Investigation of 6H–SiC site competition epitaxy the silane–methane–hydrogen gas system
756
Investigation of 6H–SiC site competition epitaxy the silane–methane–hydrogen gas system
757
Investigation of 85Sr adsorption on selected soils of different horizons
758
Investigation of a 3-DOF micro-positioning table for surface grinding
759
Investigation of a 3-DOF micro-positioning table for surface grinding
760
Investigation of a biofunctional polymeric coating deposited onto silicon microcantilevers
761
Investigation of a Boeing 747 wing main landing gear trunnion failure
762
Investigation of a broadband TiO2/SiO2 optical thin-film filter for hybrid solar power systems
763
Investigation of a bump bonding interconnect technology for GaAs pixel detectors
764
Investigation of a bump bonding interconnect technology for GaAs pixel detectors
765
Investigation of a carbon-supported quaternary Pt---Ru---Sn---W catalyst for direct methanol fuel cells
766
Investigation of a Catalytic Zinc Binding Site inEscherichia colil-Threonine Dehydrogenase by Site-Directed Mutagenesis of Cysteine-38
767
Investigation of a changing range genetic algorithm in noisy environments
768
Investigation of a chemically treated InP(1 0 0) surface during hydrophilic wafer bonding process
769
Investigation of a Class of the Singular Fractional Integro-differential Quantum Equations with Multi-Step Methods
770
Investigation of a Cluster of Legionella Infections of Unknown Origin in a Brooklyn Community
771
Investigation of a Cluster of Pediatric Cardiac [PC] Surgical Site Infections [SSI] Leads to Discovery of Significant Difference in PC SSI Rates by Specific Procedure [SP]
772
Investigation of a coated optical fiber strain sensor embedded in a linear strain matrix material
773
Investigation of a combined micro-forming and punching process for the realization of tight geometrical tolerances of conically formed hole patterns
774
INVESTIGATION OF A COMBINED SOLAR-HEAT PUMP SYSTEM FOR RESIDENTIAL HEATING. PART 1: EXPERIMENTAL RESULTS
775
INVESTIGATION OF A COMBINED SOLAR-HEAT PUMP SYSTEM FOR RESIDENTIAL HEATING. PART 1: EXPERIMENTAL RESULTS
776
INVESTIGATION OF A COMBINED SOLAR-HEAT PUMP SYSTEM FOR RESIDENTIAL HEATING. PART 2: SIMULATION RESULTS
777
INVESTIGATION OF A COMBINED SOLAR-HEAT PUMP SYSTEM FOR RESIDENTIAL HEATING. PART 2: SIMULATION RESULTS
778
Investigation of a combustion driven oscillation in a refinery flare. Part A: Full scale assessment
779
Investigation of a combustion driven oscillation in a refinery flare: Part B: Visualisation of a periodic flow instability in a bifurcating duct following a contraction
780
Investigation of a Common Solution for a Multi-Singular Fractional System by Using Control Functions Method
781
Investigation of a compact copper–water loop heap pipe with a flat evaporator
782
Investigation of a concrete railway sleeper failed by ice expansion
783
Investigation of a continuous adjoint-based optimization procedure for aeroacoustic control of plane jets
784
Investigation of a continuum damage model as an indicator for the prediction of spalling in fire exposed concrete
785
Investigation of a Copper-based Hoard from the Megalithic Site of al-Midamman, Yemen: an Interdisciplinary Approach
786
Investigation of a coupled geothermal cooling system with earth tube and solar chimney
787
Investigation of a Cr4+: YAG passive Q-switch in CW pumped Nd: YAG lasers
788
Investigation of a Cruising Fixed Wing Mini Unmanned Aerial Vehicle Performance Optimization
789
Investigation of a Cu(II) fibre optic chemical sensor using fast sulphon black F (FSBF) immobilised onto XAD-7
790
Investigation of a Cu-Zn-Al alloy with two-way shape memory effect by the cycled constrained heating/cooling technique
791
Investigation of a density measurement technique using positron radiation
792
Investigation of a diagnostic for perturbation theory. Comparison to the T1 diagnostic of coupled-cluster theory
793
Investigation of a diffusion absorption refrigerator
794
Investigation of a direct conversion flat panel imager for portal imaging
795
Investigation of a dual-stage high velocity oxygen fuel thermal spray system
796
Investigation of a dynamic diffusion flame of H2 in air with laser diagnostics and numerical modeling
797
Investigation of a dynamic seawater intrusion event using strontium isotopes (87Sr/86Sr)
798
Investigation of a failed axle of a reduction gearbox
799
Investigation of a fibre optic copper sensor based on immobilised α-benzoinoxime (cupron)
800
Investigation of a Fully-automated Manufacturing Environment Realized through a Flexible Logistic System
801
Investigation of a GaN surface structure for the mask of GaAs selective growth using MOMBE
802
Investigation of a gas catcher/ion guide system at the Warsaw cyclotron Original Research Article
803
Investigation of a gas catcher/ion guide system using an α-decay recoil source
804
Investigation of a gas turbine CHP system under the carbon price in Australia considering natural gas and biogas fuels
805
Investigation of a gas-catcher/ion guide system using alpha-decay recoil products Original Research Article
806
Investigation of a generalized attraction term of an equation of state and its influence on the phase behaviour
807
Investigation of a Geothermal-Based CCHP System from Energetic, Water Usage and CO2 Emission Viewpoints
808
Investigation of a Griffith crack subject to anti-plane shear by using the non-local theory
809
Investigation of a growing fatigue crack by means of a discrete dislocation model
810
Investigation of a growing fatigue crack by means of a discrete dislocation model
811
Investigation of a heavy rainfall event over southwestern Taiwan associated with a subsynoptic cyclone during the 2003 Mei-Yu season
812
Investigation of a high frequency pulse tube cryocooler driven by a standing wave thermoacoustic engine
813
Investigation of a high stable β-cristobalite ceramic powder from CaO–Al2O3–SiO2 system
814
Investigation of a high-power three-level quasi-resonant DC-link voltage-source inverter
815
Investigation of a hybrid approach combining experimental tests and numerical simulations to study vortex-induced vibration in a circular cylinder
816
Investigation of a hybrid system of nocturnal radiative cooling and direct evaporative cooling
817
Investigation of a hydrocarbon-degrading strain, Rhodococcus ruber Z25, for the potential of microbial enhanced oil recovery
818
Investigation of a hydrogen-assisted combustion system for a light-duty diesel vehicle
819
Investigation of a hydrothermal reduced graphene oxide nano coating on Ti substrate and its nano-tribological behavior
820
Investigation of a large top wall temperature on the natural convection plume along a heated vertical wall in a square cavity
821
Investigation of a Limestone Pillar Failure Part 1: Geology, Laboratory Testing and Numerical Modeling
822
Investigation of a Limestone Pillar Failure Part 2: Stress History and Application of Fracture Mechanics Approach
823
Investigation of a liquid–liquid extraction system based on non-ionic surfactant–salt–H2O and mechanism of drug extraction Original Research Article
824
Investigation of a lithium foil multi-wire proportional counter for potential 3He replacement
825
Investigation of a lithium foil multi-wire proportional counter for potential 3He replacement
826
Investigation of a Low Cost, Stable and Efficient Adsorbent for the Fast Uptake of Cd (II) from Aqueous Media
827
Investigation of a low-cost broad-range silicon-based temperature sensor
828
Investigation of a magnetic phase transition in fcc iron-nickel alloys
829
Investigation of a MEMS-based capillary heat exchanger for thermal harvesting
830
Investigation of a methanol reformer concept considering the particular impact of dynamics and long-term stability for use in a fuel-cell-powered passenger car
831
Investigation of a microstructured high efficiency contactor
832
Investigation of a miniature centrifugal fan
833
Investigation of a model HTSC transformer with amorphous alloy cores
834
Investigation of a modified Sinclair–La Mer aerosol generator in the submicrometer range
835
Investigation of a mouse model of familial DCM with ACTC E361G mutation
836
Investigation of a multi-generation system using a hybrid steam biomass gasification for hydrogen, power and heat
837
Investigation of a multiple trigger active disassembly element
838
Investigation of a myxoma in the right ventricular outflow tract
839
Investigation of a nanofluid-cooled microchannel heat sink using Fin and porous media approaches
840
Investigation of a nanostructured polysaccharide solid medium for electrochemistry
841
Investigation of a naphthalene pitch by high-resolution solid-state dynamic nuclear polarization
842
Investigation of a new AC electrical machine winding
843
Investigation of a new approach to decompose two potent greenhouse gases: Photoreduction of SF6 and SF5CF3 in the presence of acetone Original Research Article
844
Investigation of a new catalytic combustion-type CH4 gas sensor with low power consumption
845
Investigation of a New Catheter on Relieving Pain During Male Cystoscopy – A Randomized Clinical Trial
846
INVESTIGATION OF A NEW DESIGN OF INVERSE DIFFUSION FLAME BURNER
847
Investigation of a new electro-optical guest-host polyetherketone polymer films
848
Investigation of a new In2O3-based selective H2 gas sensor with low power consumption
849
Investigation of a new InGaP-InGaAs pseudomorphic double doped-channel heterostructure field-effect transistor (PDDCHFET)
850
Investigation of a new lead-free (0.89 − x)(Bi0.5Na0.5)TiO3–0.11(Bi0.5K0.5)TiO3–xBa0.85Ca0.15Ti0.90Zr0.10O3 ceramics
851
Investigation of a new modified source/drain for diminished self-heating effects in nanoscale MOSFETs using computer simulation
852
Investigation of a new oxidative catalytic system involving Jacobsenʹs catalyst in the absence of organic solvents Original Research Article
853
Investigation of a new polymer-water based cutting fluid to substitute mineral oil based fluids in grinding processes
854
Investigation of a new reactant for fluorinated polymer surface treatments with atmospheric pressure glow plasma to improve the adhesive strength
855
Investigation of a new reaction for the determination of microquantities of sulfite in some inorganic salts
856
Investigation of a new stator interior permanent magnet machine
857
Investigation of a New Topology for Multilevel Inverters Fed by Photovoltaic System for Linear Induction Motor
858
Investigation of a new tube-in-tube helical flow distributor design to improve temperature stratification inside hot water storage tanks operated with coiled-tube heat exchangers
859
Investigation of a new willemite-type compound, (Li, Na, H)0.16Zn1.92SiO4
860
Investigation of a new-type precision cropping system with variable-frequency vibration
861
Investigation of a new-type precision cropping system with variable-frequency vibration
862
Investigation of a nickel oxide system for heterogeneous oxidation of organic compounds Original Research Article
863
Investigation of a non-linear system under partially prescribed random excitation
864
Investigation of a novel bayonet tube high temperature heat exchanger with inner and outer fins
865
Investigation of a novel chronopotentiometric detection method using a redox mediator modified carbon electrode
866
Investigation of a novel combined cycle of solar powered adsorption–ejection refrigeration system
867
Investigation of a novel elastic-mechanical wheel transmission under light duty conditions
868
Investigation of a Novel PCRR based Channel Selective Filter for 3rd Optical Comminucation Window
869
Investigation of a novel perforation technique in petroleum wells—perforation by drilling
870
Investigation of a novel porous anodic alumina plate for methane steam reforming: Hydrothermal stability, electrical heating possibility and reforming reactivity
871
Investigation of a novel rolling contact fatigue/wear competitive life test machine faced to surface coating
872
Investigation of a novel sequential 1,5 O→O silyl migration/Horner–Wadsworth–Emmons reaction
873
Investigation of a One-Time Phenol Application for Pilonidal Disease
874
Investigation of a packed bed in a mini channel with a low channel-to-particle diameter ratio: Flow regimes and mass transfer in gas–liquid operation
875
Investigation of a parasitic outbreak of Lernaea cyprinacea Linnaeus (Crustacea: Copepoda) in Cyprinid fish from Choghakhor lagoon
876
Investigation of a peroxisome proliferator-activated receptor gamma haplotype effect on meat quality and carcass traits in pigs
877
Investigation of a phonologically based treatment for anomia: Behavioral and neural changes
878
Investigation of a photon counting avalanche photodiode from Hamamatsu photonics
879
Investigation of a photon counting avalanche photodiode from Hamamatsu photonics
880
Investigation of a photo-voltaic system with variable solar modules inclination angles
881
Investigation of a piezoelectric fan embedded in a heat sink
882
Investigation of a platinum catalyst supported on a hydrogen peroxide-treated carbon black
883
Investigation of a pore pressure driven slope failure using a coupled hydro-mechanical model
884
Investigation of a powerful analytical method into natural convection boundary layer flow
885
Investigation of a Powerful Tool for the Development of Thinly Bedded Carbonate Reservoirs
886
Investigation of a Preliminary Mixed Method of Phubbing and Social Connectedness in Adolescents
887
Investigation of a Pseudomonas aeruginosa Outbreak Related to Upper Endoscopy Procedures
888
Investigation of a PTCR effect in the Zn-Ti-Ni-O system
889
Investigation of a putative role for FLVCR, a cytoplasmic heme exporter, in Diamond-Blackfan anemia
890
Investigation of a QM/MM study on interaction of a carbon nanotube with cytarabine drug in various solvents and temperatures
891
INVESTIGATION OF A QUASI-STEADY LIQUID CRYSTAL TECHNIQUE FOR FILM COOLING HEAT TRANSFER MEASUREMENTS
892
Investigation of a rapidly solidified Al-based nanocomposite with extremely high number density of precipitates
893
Investigation of a re-entrant jet reflection at an inclined cavity closure line
894
Investigation of a reference electrode based on perovskite oxide for second kind potentiometric gas sensor in open systems
895
Investigation of a rifampin, fusidic-acid and mupirocin releasing silicone catheter
896
Investigation of a Roman age “bulk pigment” found in Vicenza Original Research Article
897
Investigation of a Romano-British Rural Ritual in Bedford, England
898
Investigation of a saddle node bifurcation due to loss of contact in preloaded spherical roller thrust bearings
899
Investigation of a secular variation impulse using satellite data: The 2003 geomagnetic jerk
900
Investigation of a semiconductor bioelectrode with Ohmic behavior in vivo: Impedance spectroscopy of p-type semiconductor electrodes in perfused living heart
901
Investigation of a Set of Novel Heat Exchanger Configurations of a Heat Recovery Steam Generator to Improve the Energy Efficiency of Combined Cycle Power Plant
902
Investigation of a Sheffield Structural Tile Floor Failure Indicates a Dangerous Design/Development Oversight
903
Investigation of a SiGe HBT during ESD stress in a 0.18-(mu)m SiGe BiCMOS process
904
Investigation of a simple and efficient method for silicon neutron transmutation doping process in Tehran research reactor
905
Investigation of a simple approach to predict rainscreen wall ventilation rates for hygrothermal simulation purposes
906
Investigation of a single Ge dots layer and its evolution upon oxidation by spectroscopic ellipsometry
907
Investigation of a single-basin solar still with deep basins
908
Investigation of a single-reheat condensing steam power plant based on energy and exergy analysis
909
Investigation of a slab method analysis and FEM simulation on rotating compression forming of ring
910
Investigation of a small scale double-reflector solar concentrating system with high temperature heat storage
911
Investigation of a small-diameter decellularised artery as a potential scaffold for vascular tissue engineering; biomechanical evaluation and preliminary cell seeding
912
Investigation of a solar cooling installation in Tunisia
913
Investigation of a solar-powered desalination system employing regeneration Original Research Article
914
Investigation of a solid-state photodetector
915
Investigation of a solid-state photodetector
916
Investigation of a spectral formulation for radiative heat transfer in one-dimensional fires and combustion systems
917
Investigation of a stable synthetic sol–gel CaO sorbent for CO2 capture
918
Investigation of a strongly gain coupled DFB laser cascade for simultaneous multigas sensing
919
Investigation of a subdivision based algorithm for solving systems of polynomial equations Original Research Article
920
Investigation of a sulfate transfer during autohydrolysis of a fucoidan from the brown alga Fucus evanescens by tandem ESIMS
921
Investigation of a Surgical Hand Antiseptic Containing 70% Ethanol and a Polyquaternium Polymer Synergist: Antimicrobial Efficacy, Skin Tolerance and End User Acceptance
922
Investigation of a test methodology for triboelectrification
923
Investigation of a traditional catalyst by contemporary methods: Parallel electron spectroscopic and catalytic studies on Pt black
924
Investigation of a traffic modelling inspired two dimensional map
925
Investigation of a transitional wear model for wear and wear-type rail corrugation prediction
926
Investigation of a two stage Rankine cycle for electric power plants
927
Investigation of a two-dimensional spectral element method for Helmholtz’s equation
928
Investigation of a unified power flow controller
929
Investigation of a van der Waals complex with C1 symmetry: the free-jet rotational spectrum of 1,2-difluoroethane–Ar
930
Investigation of a variety of cationic surfactants attached to cation-exchange silica for hydrophobicity optimization in admicellar solid-phase extraction for high-performance liquid and gas chromatography
931
Investigation of a vibration-rotation interaction in DCO+ by millimeter wave spectroscopy
932
Investigation of a wet ethanol operated HCCI engine based on first and second law analyses
933
Investigation of a whole-body DOI-PET system
934
Investigation of a whole-body DOI-PET system
935
Investigation of a windvent passive ventilation device against current fresh air supply recommendations
936
Investigation of a Zienkiewicz–Pande yield surface and an elastic–viscoplastic boundary element formulation
937
Investigation of a.c. conductivity measurements in a-Se80Te20 and a-Se80Te10M10 (M = Cd, in, Sb) alloys using correlated barrier hopping model
938
Investigation of a.c. electroluminescent structures with fullerene inclusions
939
Investigation of abnormal high impact toughness in simulated welding CGHAZ of a 8%Ni 980 MPa high strength steel
940
Investigation of abnormal wear of massive machine part-welded-technical chromium layer system
941
Investigation of abradable seal coating performance using scratch testing
942
Investigation of abrasion in Al–MgO metal matrix composites
943
Investigation of abrasion resistance of cement mortar with different pozzolanic compositions and subjected to sulfated medium
944
Investigation of abrasive + erosive wear behaviour of surface hardening methods applied to AISI 1050 steel
945
investigation of absolute metal uptake efficiency from precipitation in moss
946
Investigation of absorption pump light distribution in edged-pumped high power Yb:YAG\YAG disk laser
947
Investigation of Abundance and Diversity of Cantharidin Compounds in the Hycleus colligatus, Mylabris schrenki, Mylabris cincta, and Hycleus schah Species from Kerman Province, Iran
948
Investigation of AC/DC converter harmonics by an analytical based time-discrete approach
949
Investigation of Academic Personnel Advertisements in Sports Sciences in Terms of Human Resources Management: 2019-2020 Calendar Year Period
950
Investigation of acceleration effects on missile aerodynamics using computational fluid dynamics
951
Investigation of acceptance simulated annealing — A simplified approach to adaptive cooling schedules
952
Investigation of acceptors in p-type WS by standard and 2 photo-assisted scanning tunneling microscopyrspectroscopy
953
Investigation of accident cases for high pressure, high temperature experimental helium loop using RELAP5-3D code
954
Investigation of accident management procedures related to loss of feedwater and station blackout in PSB-VVER integral test facility
955
Investigation of Accolate and Singulair for Treatment of Capsular Contracture Yields Safety Concerns
956
Investigation of Accounting Ethics Effects on Financial Report Quality Decision Making: Evidence from Kabul-based Logistic Corporations
957
Investigation of Accrual Reliability and Prediction of Future Cash Flows in Select Companies Listed in Tehran Stock Market
958
Investigation of ACE Inhibitory Effect and Antioxidant Activity of Peptide Extracted from Spirulina Platensis
959
Investigation of acetylated chitosan microspheres as potential chemoembolic agents
960
Investigation of Acid and Bile Tolerance of Native Lactobacilli Isolated from Fecal Samples and Commercial Probiotics by Growth and Survival Studies
961
Investigation of Acid Blue 62 Dye Adsorption using SBA-15/Polyaniline Mesoporous Nanocomposite: Kinetic and Thermodynamic Study
962
Investigation of acid proteinase biosynthesis by the fungus Humicola lutea 120-5 in an airlift bioreactor
963
Investigation of acidic methanol solution as a fuel for microchannel fuel cells
964
Investigation of Acid-Neutralizing Property of Bacillus cereus GUF8
965
Investigation of acoustic cavitation energy in a large-scale sonoreactor
966
Investigation of acoustic cavitation energy in a large-scale sonoreactor
967
Investigation of acoustic emission accompanying stick-slip movement of rock samples at different stiffnesses of spring–block system
968
Investigation of acoustic emission source of Fe-based sprayed coating under rolling contact
969
Investigation of acoustic load sensitivity of quartz crystal resonator and related sensors
970
Investigation of Acoustic Properties of Satin 7/1 Woven Fabrics Containing Hollow and Micro-porous Yarns
971
Investigation of acoustical shielding by a wedge-shaped airframe
972
Investigation of acoustoionic and acoustoelectronic interaction in fast ionic conductors
973
Investigation of acrylamide in curries made from coconut milk
974
Investigation of Acrylamide Levels in Selected Fried Foods in Syria
975
Investigation of acrylonitrile polymerization on the surface of porous microspherical silica gel
976
Investigation of activated carbon obtained from the liquid products of pyrolysis in sunflower oil bleaching process
977
Investigation of activated transport in hole doped rare earth manganites in the high temperature paramagnetic regime
978
Investigation of activation time on pore size distribution of activated carbon determined with different methods
979
Investigation of activation time on pore size distribution of activated carbon determined with different methods
980
Investigation of active crystal morphogenesis peptide sequences from peptide libraries by crystallization on peptide functionalized beads
981
Investigation of Active Geodynamics Caused by Performance of Salt Dome Using Radar Interferometry (Case Study: The Salt Dome of Qeshm Island)
982
Investigation of active metal species formation in Pd-promoted sulfated zirconia isomerization catalyst Original Research Article
983
Investigation of acute dermal irritation/corrosion, acute inhalation toxicity and cytotoxicity tests for Nanobiocide®
984
Investigation of acute effects of aflatoxin on rat proximal and distal colon spontaneous contractions
985
Investigation of acute toxicity and the effect of 2,4-D (2,4-dichlorophenoxyacetic acid) herbicide on the behavior of the common carp (Cyprinus carpio L., 1758; Pisces, Cyprinidae)
986
Investigation of acute toxicity and the effect of cadmium chloride (CdCl2 · H2O) metal salt on behavior of the guppy (Poecilia reticulata)
987
Investigation of Acute Toxicity Diazinon, Deltamethrin, Butachlor and pretilachlor on Zebra Cichlid (Cryptoheros nigrofasciatus)
988
Investigation of acute toxicity of beta-cypermethrin on guppies Poecilia reticulata
989
Investigation of acute toxicity of cadmium chloride (CdCl2 · H2O) metal salt and behavioral changes it causes on water frog (Rana ridibunda Pallas, 1771)
990
Investigation of acute toxicity of cadmium sulfate (CdSO4 · H2O) and behavioral changes of grass carp (Ctenopharyngodon idellus Val., 1844)
991
Investigation of acute toxicity of cadmium-arsenic mixtures to Daphnia magna with toxic units approach
992
Investigation of acute toxicity of chlorpyrifos-methyl on guppy Poecilia reticulata
993
Investigation of acute toxicity of chlorpyrifos-methyl on Nile tilapia (Oreochromis niloticus L.) larvae
994
Investigation of acute toxicity of deltamethrin on guppies (Poecilia reticulata)
995
Investigation of acute toxicity of fenitrothion on peppered corydoras (Corydoras paleatus) (Jenyns, 1842)
996
Investigation of acute toxicity of lead-manganese mixture to fish under laboratory conditions
997
Investigation of acute toxicity of permethrin on guppies Poecilia reticulata
998
Investigation of Additive Manufacturing Process by LMD Method, Affecting Process Parameters on Microstructure and Quality of Deposition Layers
999
Investigation of additives for preventing ash fouling and sintering during barley straw combustion
1000
Investigation of adducin phosphorylation by PKC in neonatal rat cardiomyocytes
