بر اساس عنوان

1
F. G. NOETHERIAN MODULES AND F. G. ARTINIAN MODULES
2
F0 in the speech of hearing aided and cochlear implanted children
3
F0 peak alignment of the stressed syllable in Persian prenuclear accent - Batool Alinezhad
4
Fabracation and Characterization of Amidoximated Polyacrylonitrile
5
fabrcation of electrochemical nano- structured sensor for determination of atrazine contaminants in waste and tape water
6
Fabrication a new modified electrochemical sensor based on GO/AgCo dendritic nanoparticles, [PMIM] Br ionic liquid for anticancer drug, imatinib determination
7
Fabrication and bending characterization of Cu-Fe FGM produced by powder metallurgy method
8
Fabrication and characterization of 3D bio-printed electroconductive hydrogel scaffold based on Alginate and its application in cardiac tissue engineering
9
Fabrication and characterization of Al foam through powder metallurgy rout by using acrylic powder as space holder
10
Fabrication and characterization of amorphous/nanocrystalline Fe-Ni-P electrodeposited coatings
11
Fabrication and Characterization of Cellulose Nano Crystal (CNC) in Tissue Engineering
12
Fabrication and Characterization of citrated starch nanoparticle for PRP delivery
13
Fabrication and characterization of dexamethasone-releasing polylactic acid nanospheres for treatment of hearing loss
14
Fabrication and characterization of dexamethasone-releasing polylactic acid nanospheres for treatment of hearing loss
15
Fabrication and Characterization of electrospun PCL/Gelatin/Aloe vera hybrid nanofiber membrane
16
Fabrication and Characterization of Gelatin Nanoparticles by Nanoprecipitation as a Delivery System for Erythromycin
17
Fabrication and Characterization of High Modulus Composites as End Plate for Polymer Electrolyte Membrane Fuel Cell Application
18
Fabrication and Characterization of High Modulus Composites as End Plate for Polymer Electrolyte Membrane Fuel Cell Application
19
Fabrication and characterization of hot pressed Al2O3–SiC fibrous monolithic ceramics
20
Fabrication and Characterization of Inorganic-Conducting Polymer-Based BHJ Polymer Solar Cells
21
Fabrication and characterization of L-Asparagine monohydrate functionalized-TiO2/PES nanofiltration membrane with enhanced antifouling properties in removal of dye pollution from water
22
Fabrication and characterization of magnetic metal–organic framework nanocompositeas solid-phase microextraction fibers coupled with high-performance liquid chromatography for determination of non-steroidal anti-inflammatory drugs in biological fluids and tablet formulation samples.
23
Fabrication and characterization of microporous polymeric filters using sintering technique
24
Fabrication and characterization of nanostructured reduced Graphene Oxide Derived from the Peel of Wild Pistachio fruits
25
Fabrication and characterization of novel Polymer/MetalOxide/Polyoxometalate(PMP) Compositeand its highly catalytic performance for the oxidative desulfurization
26
Fabrication and characterization of PCL/gelatin/Chamomile ternary nanofibrous composite scaffold for tissue engineering applications
27
Fabrication and characterization of Poly(vinylidene fluoride)/Matrimid blend membrane for CO2/CH4 separation
28
Fabrication and Characterization of Polyaniline Based Schottky Diode
29
Fabrication and Characterization of polyimide mixed matrix membranes containing functionalized MWCNTs by beta-cyclodextrin
30
Fabrication and Characterization of Polymer Solar Cell based on Synthesis MEH-PPV
31
Fabrication and Characterization of Polyvinylidene Fluoride - Graphene Nanocomposite Membrane for VMD Desalination
32
Fabrication and characterization of Polyvinylidene Fluoride Nanofiltration Membrane for Wastewater Treatment
33
Fabrication and characterization of starch-poly (acrylic acid) nanofiberous structures
34
Fabrication and Characterization of Vertically Aligned Carbon-nanotube and Alumina Nanocomposite
35
Fabrication and Characterization of Vertically Aligned Carbon-nanotube and Alumina Nanocomposite
36
Fabrication and Characterization of Zeolite-Polyamide Thin Film Nanocomposite (TFN) Nanofiltration Membrane
37
FABRICATION AND CHARACTERIZATION OF POLYSULFONE/TITANIUM DIOXIDE ULTRAFILTRATION MEMBRANE
38
Fabrication and evaluation of antibacterial electrospun fibers for wound healing applications
39
Fabrication and evaluation of antibacterial fabrics using sonochemical method for wound healing applications
40
Fabrication and evaluation of PZT/PVDF electrospun fiber composites using by weight percent and per hundred of solution method
41
Fabrication and evaluation of the effect of niosomal doxycycline with artemisinin plant extract on Leishmania major in vitro and in vivo
42
Fabrication and Experimental Modal Testing of Composite Sandwich Structure With Grid Stiffened Core
43
Fabrication and in vitro evaluation of novel nanofiber scaffolds from gum tragacanth/poly (vinyl alcohol)/chitosan for wound dressing application
44
Fabrication and Investigation of an Easy-to-Prepare Extremely Sensitive Resistive-Type Humidity Sensor Based on Epoxy Resin/MWCNTs Nanocomposite
45
Fabrication and Investigation of an Easy-to-Prepare Highly Sensitive Temperature Sensor Based on Epoxy Resin/Copper (II) Oxide Nanoparticles/ MWCNTs Nanocomposite
46
Fabrication and investigation of highly nitrogen content graphitic carbon nitride (g-C3N5) as a promising cathode for oxygen reduction reaction
47
Fabrication and investigation of magnetic properties of CoCrSn nanowire by alternating electrodeposition method: the role of pH
48
Fabrication and investigation of performance of nanocomposite electrodes composed of carbon quantum dots and copper nanoparticles for catalysis of hydrogen evolution reaction
49
Fabrication and in-vitro Evaluation of HA/UHMWPE composite as a Bone Substitute
50
Fabrication and in-vitro Evaluation of HA/UHMWPE composite as a Bone Substitute
51
Fabrication and luminescence properties of rare-earth luminous nanocomposite fiber
52
Fabrication and modification of graphene Supports for Platinum Electro catalyst using in Proton Exchange Membrane Fuel Cells
53
Fabrication and modification of PVDF mixed matrix ultrafiltration membranes by PEG and PVP hydrophilic polymers
54
Fabrication and Morphology Study of PES/MWCNTs Mixed Matrix Hollow Fiber Membranes
55
Fabrication and optimization of bioactive cylindrical scaffold by using electrospinning for vascular tissue engineering
56
Fabrication and optimization of PLGA nanofibrous by electrospinning method as tissue e ngineering scaffold
57
Fabrication and Performance Evaluation of MXene for Electrochemical Detection of Glucose
58
Fabrication and Performance Evaluation of Nanostructure Ceramic Membranes in the permeation of -La and -Lg whey proteins
59
Fabrication and Simulation of Polyfluorene-Based Organic Light-Emitting Diodes
60
Fabrication of 5mol% Yttria Stabilized Zirconia tubular solid electrolyte by screen printing method
61
Fabrication of a Cost-Effective Piezoresistive Pressure Sensor Based on PVC/Reduced Graphene Oxide (rGO) Composite
62
Fabrication of a Curcumin Incorporated Nanocomposite as a Scaffold for Chronic Wound Dressing
63
Fabrication of a Glassy Carbon Electrode Coated with Ni-Au Nanoparticles and Its Application on Electrolytic Oxidation of Methanol in Fuel Cells
64
Fabrication of a Glucose Nanobiosensor based on Silver Nanoparticles and Glucose Oxidase-Chitosan Matrix
65
Fabrication of a modified and flexible plastic-based graphite electrode and its application for determination of some drug compounds in biological samples
66
Fabrication of a modified carbon paste electrode based on magnetic nanocomposite Fe3O4/C/Ag towards determination of ceftriaxone
67
Fabrication of a multilayer PEBA/PAN/PE composite membrane by spin coater
68
Fabrication of a new electrochemical sensor based on gold nanoparticles decorated multiwall carbon nanotubes/graphene oxide nanocomposite for diclofenac determination
69
Fabrication of a novel nanostructure electrochemical sensor for determination of tyrosine
70
Fabrication of a novel nanostructure electrochemical sensor for determination of tyrosine
71
Fabrication of a novel polyol from sunflower oil for synthesis of antibacterial polyurethane coating
72
Fabrication of a polymeric sensor using cobalt-nickel-iron nano composite for cerium measurement in different samples
73
Fabrication of a self-healing antibacterial hydrogel using β-cyclodextrin dimer/modified alginate/AgNO3
74
Fabrication of a sensor based upon polyphenylenediamine/NiO/MWCNTs nano-composite for determination of morphine
75
Fabrication of a very sensitive electrochemical sensor for determination of trace amounts of 2,4-dichhlorophenoxyacetic acid in soil and water samples
76
Fabrication of adsorptive mixed matrix membranes by embedding modified montmorillonite with folic acid into polysulfone for lead removal
77
Fabrication of Alginate-carboxymethyl cellulose blend beads via Titanium(IV) oxide/Covalent organic frameworks hybrids under ultrasonic irradiation
78
Fabrication of Aloe Vera-loaded gelatin/poly(Ɛ-caprolactone) nanofibers with optimized mechanical properties
79
Fabrication of Aluminum Based Surface Composites using Hot Rolling Method
80
Fabrication of Amine and imine-functionalized Isoreticular Metal-Organic Frameworks for improved catalytic performance
81
Fabrication of an Amplified Electrochemical Sensor for Ultrasensitive and Selective Monitoring of leukemia drug Imatinib in Human Serum
82
Fabrication of an electrochemical EGFR immunosensor using BSA-templated Pb nanocluster as a biocompatible signaling probe
83
Fabrication of an electrochemical molecularly imprinted polymer sensor for determination of ketorolac trometamin using multivariate optimization using multi-walled carbon nanotubes
84
Fabrication of an in situ forming bioadhesive hydrogel with high mechanical strength for cartilage tissue engineering
85
Fabrication of Bi2O3-poly para-aminophenol modified glassy carbon electrode
86
Fabrication of bimetallic Pd/Pt nanostructure deposited on copper nanofoam substrate as a novel sorbent for solid phase microextraction method
87
Fabrication of Carbon Electrodes- based IPMC Soft Actuators and Enhanced Actuation Performance
88
Fabrication of carbon modified visible light active TiO2/MCM-41 nanocomposites for desulfurization of a diesel fuel model
89
Fabrication of chitosan-polyethylen oxide nanofiber mats containing green tea extract
90
Fabrication of CNTs Based Heating Element
91
Fabrication of composite PAN/PEBA/PDMS membrane for separation of CO2 from syngas (CO2/H2)
92
Fabrication of Continuous Highly Twisted Electrospun Yarn by Two Differently Charged Nozzles and Study Their Mechanical Properties
93
Fabrication of Crosslinked Dextran Microspheres: Screening of Effective Parameters by Plackett-Burman Design-of-Experiments
94
Fabrication of CuO nanoparticle/ionic liquid modified carbon paste electrode: Application for simultaneous determination of hydrazine and bisphenol A in water samples
95
Fabrication of Cysteic acid/ gold nanoparticle Composite Film- Modified Glassy Carbon electrode for the Simultaneous Voltammetric Detection of Acetaminophen and Tramadol
96
Fabrication of drug-carrying nanocomposites from polylactic acid, polyethylene glycol and hydroxyapatite
97
Fabrication of Efficient Piezoelectric Nanogenerators to Obtain Electrical Energy from Surrounding Mechanical Strains and Stresses
98
Fabrication of electrochemical sensor based on nano-sized molecularly imprinted polymer for detection of L-Tryptophan
99
Fabrication of electrochemical sensor based on the modification of graphite pencil electrode for Pb2+ and Cd2+ determination in its real samples
100
Fabrication of electrospun polyvinylalcohol nanofiber containing Ferula assa-foetida gum extract and investigating its antibacterial properties
101
Fabrication of field-effect transistor (FET) based on ZnO nanowire/graphene nanoribbon heterostructures
102
Fabrication of Flexible Laser Scribed Graphene
103
Fabrication of gelatin/ poly (vinyl alcohol)/ carboxymethyl cellulose composite nanofibrous sponge for hemostatic application
104
Fabrication of GO/Fe3O4/SDS magnetic nanocomposites as adsorbents to remove malachite green from water
105
Fabrication of graphene and its application as nanocomposite material for lithium ion batteries
106
Fabrication of High Activity Electrocatalysts For Oxygen Reduction Reaction By Silica-Protection Of Zeolitic Imidazolate Framework (ZIF)- Derived
107
Fabrication of high density BaTiO3 ceramics by gel casting
108
Fabrication of High Luminescent Mn Doped CdS Semiconductor Nanoparticles
109
Fabrication of Highly Stable Platinum Nanoparticle via Microemulsions
110
Fabrication of hollow and non-hollow SiO2 nanofibers: investigation of production conditions and the dye removal ability
111
Fabrication of hybrid composite including self-reinforced polypropylene and nanoclay
112
Fabrication of hydroxyapatite on electrospun poly caprolactone- block styrene sulfonate nanofiber and their effects in drug delivery&tissue engineering
113
Fabrication of Integrated Dehydrogenase-Based Electrochemical Biosensors in order to detection of amino acids in biological samples
114
Fabrication of laboratory scale hollow fiber modules for H2 separation process through industrial based method
115
Fabrication of lotus-type porous copper electroplated with a nanostructured nickel coating, a suggested way to increase catalytic properties
116
Fabrication of Magnesium/Hydroxyapatite Bio-composite Using Stir Casting Method
117
Fabrication of MEA based on nitrogen doped graphene as highly efficient and durable support for oxygen reduction reaction in PEMFCs
118
Fabrication of MEA based on sulfonic acid functionalized carbon supported platinum nanoparticles for oxygen reduction reaction in PEMFCs
119
Fabrication of Mesoporous Silica using Triblock Copolymer as Template
120
Fabrication of modified graphite with WO3 nanoparticles for application in photo-electrocatalytic microbial fuel cell for degradation of pollutants
121
Fabrication of Nano barium tin oxide Powders via a Facile Method
122
Fabrication of nanobiocomposite films using chitosanpoly (vinyl alcohol) blended polymers
123
Fabrication of nanofibers containing beta-sitosterol based on proline_x0002_Hydroxyproline-chitosan
124
Fabrication of nanofibrous Piezoactive bioscaffold based on PVDF-GO/PLLA nanocomposite by hybrid electrospinning method
125
Fabrication of Nanofibrous Scaffolds for Wound Healing by Poly-Caprolactone, Graphene Oxide and Quercetin
126
Fabrication of nanofibrs base on poly lactic acid for drug release in wound dressing
127
Fabrication of nano-geopolymer filter cartridge for treatment of polluted aqueous solutions with Methylene blue
128
Fabrication of new amperometric biosensor for determination of Tartrazine
129
Fabrication of NiFe2O4@ Al-MCM-41/Cu2O nanocomposite with enhanced photodegradation performance
130
Fabrication of Novel Modified Glassy Carbon Electrode for Determination of Toxic Phenol
131
Fabrication of Novel organic-inorganic hybrid membrane for adsorption of heavy metals from aqueous solution
132
Fabrication of PAN/ZnO/SA nanocomposite membrane in order to fouling mitigation in a submerged membrane bioreactor
133
Fabrication of PEBA/PSF composite membrane for natural gas sweetening
134
Fabrication of Pharmaceutical Nano Particles Through RESS Process; Influence of Temperature, Pressure and Co-solvent
135
Fabrication of phosphazene based covalent triazine polymer with excellent flame retardancy and smoke suppression for thermoplastic polyurethane
136
Fabrication of PLA based composites through the employment of 3D printing for biological applications
137
Fabrication of PLGA microcarriers with oxygen release capability for bone tissue engineering
138
Fabrication of Poly(Lactic Acid) and Chitosan Nanofibers and Comparison Study on Their Biodegradation Properties
139
Fabrication of polyamide-6 electrospunnanofiber mat coated with polyanilineas a membrane for separation of oil in water emulsion
140
Fabrication of polymeric film using electrospun nanofibers for sublingual delivery of rizatriptan
141
Fabrication of Polypyrrole-Graphene oxide / Nickel Oxide nanocomposite and investigation of their electrochemical treatment in supercapacitor
142
Fabrication of Porous Graphene Sheets Promoted with Phosphotungstic Acid Anchored to Nitrogen-Doped Organic Framework for the Catalytic Reduction of Organic Dyes
143
Fabrication of porous PVDF hollow fiber and flat membranes by immersion precipitation using Taguchi experimental design
144
Fabrication of P-Type Microcrystalline Silicon Thin Film by Magnetron Sputtering and Copper Induced Crystallization
145
Fabrication of PVA-based transparent composite films by adjusting the pH and hydrolysis for superficial cornea tissue engineering
146
Fabrication of Self-Healing Hydrogels Through Inclusion Complexation of Vinyl Modified Macrocyclic Monomers
147
Fabrication of St37 Steel Surface Composites Reinforced by ZrO2 Nano Particles via Friction Stir Processing
148
Fabrication of stretchable interconnects embedded in Biocompatible Elastomers
149
Fabrication of super-hydrophobic nickel film with micro-nano hierarchical structure by electrodeposition process
150
Fabrication of the 3D-printed polycaprolactone scaffold incorporating halloysite nanotubes for controlled drug delivery
151
Fabrication of Thin Film Nanocomposite Based on PVB and SWCNTs as a Transparent Electrode in Photovoltaic Applications by Spin Coating
152
Fabrication of Uniaxially-Aligned PVA Based Electrospun Fibers
153
Fabrication of UV sensor using point
154
Fabrication of vanillin electrochemical sensor using glassy carbon electrode modified with Au@Pd /PMo12 nanohybrid
155
Fabrication of Water Exposed Super Hydrophilic Polycaprolactone Based Fibers. Part 1: Morphology of Swelling
156
Fabrication of Water Exposed Super Hydrophilic Polycaprolactone Based Fibers. Part 2: Dynamic of Swelling
157
Fabrication of water-compatible superparamagnetic molecularly imprinted biopolymer for clean separation of baclofen from bio-fluid samples: A mild and green approach
158
Fabrication of WO3/MWCNT/graphite nanocomposite as a novel electrode in vanadium redox flow battery
159
Fabrication of zirconia tetragonal phase by plasma electrolytic oxidation on Zircaloy-4 alloy and its electrochemical corrosion behavior
160
Fabrication of Zirconium Oxide Complex Bridged by Terephthalic Ligands (UIO66)-PVDF Mixed Matrix Membrane for Lithium Ion Battery Separator
161
Fabrication of ZnFe2O4/GO nanocatalyst with enhanced and stable photocatalytic performance
162
Fabrication of ZnO nanorods on a stainless-steel mesh for highly efficient photocatalytic applications
163
Fabrication off Li--B Based Nanocrystalline Ceramics for Application in Thermoluminescence Dosimeters
164
Fabrication Procedure and buckling Behavior of Composite Lattice Cylindrical Shells Under Axial Loading
165
Fabrication Procedure and buckling Behavior of Composite Lattice Cylindrical Shells Under Axial Loading
166
Fabrication, Characterization and Photocatalytic application of sol-gel derived MWCNT-ZnO hybrid nanomaterial
167
Face and politeness theories and the place of Persian language and culture
168
Face Pose Normalization for Identity Recognition using 3D Information by means of Neural Networks
169
Face Presence Estimation Based on Scene Recognition Approach
170
Face Recognition Using Contourlet-Based Features and Hybrid PSO-Neural Model
171
Face Verification in the Wild using Similarity in Representations
172
Face Verification using Second Orders Polynomial Correlation Filters
173
Facebook User’s Like Behavior Can Reveal Personality
174
Facial Age Estimation under the Terms of Local Latency Using Weighted Local Binary Pattern and Multi-Layer Perceptron
175
Facial Emotion Recognition Using Gravitational Search Algorithm
176
Facial Expression Generic Elastic Models from a Single 2D Image for large Pose Face Synthesis and Recognition
177
Facial Expression Recognition in the Presence of Occlusion Using Local Gabor Binary Patterns
178
Facial Expression Recognition Using Facial Effective Areas And Fuzzy Logic
179
Facies and sedimentary environment of cretaceous units at north west of Dihuk – Tabas region(Shotori mountain range)
180
Facil preparation of stimuli-responsive graphene oxide/polymer brush nanocomposites as drug delivery agent
181
Facile and efficient one-pot synthesis of 2-phenyl-1H-phenanthro## [9,10-d]imidazole derivatives using magnetic Co doped NiFe2O4 nanocomposite as a heterogeneous and recyclable catalyst
182
Facile and green synthesis of NiFeAlO4 magnetic nanoparticles via arabic gum
183
Facile and Homogeneous Acetylation of Microcrystalline Cellulose in LiCl/DMAc Solvent System
184
Facile and Reliable Synthesis and Characterization of a core-shell magnetic zeolitic-imidazolate Framework-8 (Fe3O4@ZIF-8)
185
Facile diastereoselective sonochemical synthesis of isoxazolidines catalyzed by Fe3O4-L-proline nanoparticles as a magnetic catalyst
186
Facile electrochemical synthesis of new ternary mixed metal oxide: characterization and energy storage studies
187
Facile Fabrication of Cross-linked Porous Chitosan Scaffolds for Cartilage Tissue Engineering
188
Facile hydrothermal preparation of MnO2 nanoparticle loaded on clinoptilolite natural zeolite
189
Facile photochemical growth of metallic nanoparticles for automobile exhaust catalysis
190
Facile photochemical growth of metallic nanoparticles for automobile exhaust catalysis
191
Facile Preparation of Novel Hydrophilic Polypropylene Based Substrates
192
Facile Route for Preparation of Benzil Derivatives via Oxidation of Alkenes under Metal-Free Conditions
193
Facile sonochemical synthesis of pyrrole derivatives using MWCNTs-SO3H as a reusable catalyst
194
Facile synthesis and characterization of Fe3O4 – CNT magnetic nanocomposite
195
Facile synthesis and characterization of zirconia nanoparticles by decomposition of a novel inorganic precursor
196
Facile Synthesis of 5-Substituted 1H-Tetrazoles Utilizing Doped Nano-Sized Copper(I) Oxide (Cu2O) on Melamine Formaldehyde Resin
197
Facile Synthesis of Chalcopyrite Nanostructures and Its Electrocatalytic Properties
198
Facile Synthesis of CuO Nanosheets as Anode Material for Rechargeable Lithium-ion Batteries
199
Facile synthesis of g-C3N4 nanosheets anchored with AgCl and CDs and its efficient activity in reduction of Cr(VI)
200
Facile synthesis of Graphene Oxide-Fe3O4 Nanoparticle Composites
201
Facile synthesis of nickel nanoparticles supported on porous silicon flour for non-enzymatic glucose sensing
202
Facile synthesis of nonmetal-doped graphitic carbon nitride polymers
203
Facile Synthesis of Pd/MWCNT Nanocomposite for Ethanol Fuel Cell
204
Facile synthesis of uniform nanoporous CuCo2S4 hollow microspheres as a novel electrode material for high-performance supercapacitors
205
Facile synthesis silicon-based nanosheets as anodes for lithium ion batteries
206
Facile Technique for GelMA Synthesis Providing Increased Methacrylation Degree
207
Facility location models for humanitarian relief logistics: A Literature review
208
FACILITY LOCATION NETWORK IN TERMS OF DISTANCE IN GRAPHS
209
Facility Location on Digraph
210
Facility location with use of FANP
211
Facility location-allocation model for planning relief logistics in disaster management
212
Factored Language Model Adaptation Using Dirichlet Class Language Model for Speech Recognition
213
FACTORIZATION OF SOME SUBSPACES WITH RESPECT TO A BILINEAR MAP
214
Factors affecting buyer Trust through B2B Electronic Commerce
215
Factors affecting buyer Trust through B2B Electronic Commerce
216
Factors affecting in the synthesis of nanocrystalline MFI
217
Factors affecting labor productivity in construction projects in Iran and their sensitivity analysis
218
Factors affecting on farmers attitudes towards sustainable Environmental effects of integrated pest management (A Case Study of pistachio growers in Kerman province
219
Factors affecting on productivity improvement organizations
220
FACTORS AFFECTING SURVIVAL IN TSUNAMI EVACUATION
221
Factors affecting the damping of composite/honeycomb sandwich panels
222
Factors affecting the damping of composite/honeycomb sandwich panels
223
Factors affecting the growth disorder of children under two years of age using multilevel models
224
Factors Affecting the HGV Driversʹ Fatigue & Road Accidents
225
Factors and Challenges in English Accent Acquisition for Speakers-of-Other-Languages in Canada
226
Factors associated with depression in midlife women in the Middle East region: A Systematic Review
227
Factors Associated with Homosexuality Tolerance: The Role of Personality,Conservatism,Religiosity and Scientific Knowledge
228
Factors causing the crisis of the Lake Urmia
229
Factors Influencing Brand Equity in the Age of Electronic Services (Case of: Educational Services of Safir Institute)
230
Factors Influencing Brand Equity in the Age of Electronic Services (Case of: Educational Services of Safir Institute)
231
Factors Influencing English Language Teachers’ Fair Practice in Classroom Assessment
232
Factors Influencing Individuals’ Trust in Online Purchase through Social Networking Sites
233
Factors Influencing Individuals’ Trust in Online Purchase through Social Networking Sites
234
Factors influencing Mobile Advertising on Behaviour intention (case study: Students Erbil)
235
Factors influencing natural and anthropogenic occurrences of Fluoride rich agriculture wells and related dental fluorosis: a case study in southern Fars province, Iran
236
Factors influencing on choosing normal vaginal delivery among pregnant women refereed to health centers in Bushehr port
237
Factors Influencing that participation in optimal use of water in the agriculture industry (Case Study: Kurdistan province, Dehgolan city)
238
Factors Influencing the Development of Rural Entrepreneurship A Case Study of Iran
239
Factors Motivating EFL students’ Willingness to Communicate in Group Tasks
240
Factors that affecting the coalescence time and drop lifetime
241
Faecal excretion profile of doramectin and ivermectin after oral administration in horses
242
Fagonia spp.: An important genus of medicinal plants in Sistan and Baluchistan province, Iran
243
Failure analysis of combined heat and power steel-based expansion joint used in distribution generation
244
Failure analysis of second row compressor blades
245
Failure analysis of second row compressor blades
246
Failure Analysis of Thermowell’s Support Pipes Installed on the Main Feed Gas Pipelines of the South Pars Gas Complex
247
Failure behavior of inserts in sandwich panels under pull-out loading
248
Failure behavior of inserts in sandwich panels under pull-out loading
249
Failure load prediction of steel-CFRP double strap joints under quasi-static tensile loading
250
Failure mode and effects analysis by a new improved method-based preference solution index under uncertainty
251
Failure Mode Map for Foam Core Sandwich Panel with Composite Faces under Static Local Loading
252
Failure of Communism in Iran A Symptomatic Reading of Hamsayeha
253
Failure Prediction of DP600 Steel during Cross-Die Test
254
Failure Probability Based Analysis of Dropped Object on Submarine Pipelines
255
Failure-Prediction by Stochastic Petri Nets in Repairable System Using Event Data
256
Failures Analysis of Passenger Elevators: Redesigning of Failure Prone Subsystems based on Risk Priority Number (RPN)
257
Fair domination polynomial of a graph
258
Fair profit contract with soft time-windows for a carrier collaboration framework in a hub network: Dual Lexicographic max–min
259
Fair value Accounting and Precision of Forecasting Analysis
260
Faith-Based Peacebuilding Through Intercultural Dialogue
261
family base erosion of mazandarani dialect in ghaemshahr
262
Family history of diabetes and the risk of gestational diabetes mellitus in Iran: a systematic review and meta-analysis
263
FAMILY STRUCTURE AND ECONOMIC STAGNATION OF MUSLIM INDUSTRIAL LABOUR IN THE PERIPHERAL WARDS OF OLD ALIGARH CITY
264
FARMERS’ KNOWLEDGE OF LAND DEGRADATION ISSUES IN GANGA DISTRICT, DAURA EMIRATE, KATSINA STATE, NIGERIA
265
Farsi Machine-printed Subwords Recognition Using Contour-based Fourier Descriptors
266
Fas ligand expression and mediated activation of an apoptosis program in bovine infertile hydatid cyst
267
Fascinating Oxygen Reduction on ZIF-derived Fe-N co-doped Carbon composite with graphene
268
Fashion set design with an emphasis on color harmony using the interactive genetic algorithm
269
Fast Adsorption of Chromium (VI) Ion from Synthetic Sewage Using Bentonite/ Bio-coal Composite
270
Fast and direct synthesis of Zno nanostructures via novel microwave method:simple h2 gas sensor
271
Fast and Efficient Synthesis of ZSM-5 in a Broad Range of SiO2/Al2O3 without using seeding gel
272
Fast and Efficient Synthesis of ZSM-5 in a Broad Range of SiO2/Al2O3 without using seeding gel
273
Fast and Optimal Model Predictive Control for quasi Z-source Three Phase Four Leg Inverter
274
Fast and Pipelined Bit-Parallel Montgomery Multiplication and Squaring over GF(2m)
275
Fast and Scalable Protein Motif Sequence Clustering based on Hadoop Framework
276
Fast and sensitive analysis of nitro-phenanthrenes in water and soil samples using copper loaded polyaniline@magnetic halloysite nanotube composite coupled with gas chromatography–mass spectrometry
277
Fast Approximate MST-based Clustering of Euclidean Graphs Using t-Spanners
278
Fast characterization of the rupture duration and earthquake magnitude using the P-wave peak displacement
279
Fast copro-PCR detection of Taeniidae eggs in the carnivorous hosts using new mitochondrial primers
280
Fast DC Bus Voltage Regulation for a Low Cost Single-Phase Grid-Connected PV Microinverter With a Small DC Bus Capacitor
281
Fast derivatization of aliphatic aldehydes followed by gas chromatographic analysis Application: for human exhaled breath analysis
282
Fast Detection and Localization of Open-Circuit Switch Faults in Nested Neutral Point Clamped (NNPC) Inverter
283
Fast Determination of the Critical Fracture Toughness (KIC) of the Rails U33 and UIC60 by the Charpy V-notch Test
284
Fast Frequency Control of Low-Inertia Hybrid Grid Utilizing Extended Virtual Synchronous Machine
285
Fast Multi-Match Packet Classification Using Index Bits
286
Fast Optimization for VCOs Using GSA Algorithm
287
Fast Synthesis of Nano Crystal Zeolite NaY Without Using Organic Template
288
Fast Texture Similarity Search Using Walsh-Hadamard Transform
289
Fast Updating the STBC Decoder Matrices in the Uplink of a Massive MIMO System
290
Fast, feasible and safe method for evaluation of H2S Scavenger performance in acidizing laboratory
291
FAT POINTS IN PROJECTIVE SPACE AND THEIR ASYMPTOTIC INVARIANTS
292
Fathoming the Cultural Schema of Ta’ne Zadan in Persian Language: A Cultural Linguistic Study
293
Fatigue Analyses in Fixed Offshore Jackets using Spectral Method
294
Fatigue Analysis of an Ethane Gas Drier Pressure Vessel Regarding ASME SEC VIII, Div. 2, Ed. 2017
295
Fatigue Behavior of Shear Connectors in Steel-Concrete Beams with Partial Interaction
296
Fatigue Behavior of Warm Mix Asphalt vs. Hot Mix asphalt
297
Fatigue Crack Growth Assessment of Skin-Stringer Panels having Different Crack Scenarios
298
Fatigue Crack Growth Assessment of Skin-Stringer Panels having Different Crack Scenarios
299
Fatigue Crack Growth Assessment of Skin-Stringer Panels having Different Crack Scenarios
300
fatigue damage evaluation by image processing from surface feature for aluminum 2024-T351 alloy
301
fatigue damage evaluation by image processing from surface feature for aluminum 2024-T351 alloy
302
fatigue damage evaluation by image processing from surface feature for aluminum 2024-T351 alloy
303
Fatigue Damage Evolution of Notched Composite Multilayered Structures under Tensile Loads
304
Fatigue Damage of Long Fibre Reinforce Composites
305
Fatigue Finite Element Analysis of a Notched 8630 Alloy Steel Sample under Cyclic Axial Loading
306
Fatigue Investigation of Metallic Diaphragm in Sonic Soot Blower
307
Fatigue Life Assessment of Steel Samples undergoing various Irregular Multiaxial Loading Spectra through Energy-based Damage Models
308
Fatigue Life Assessment of Steel Samples undergoing various Irregular Multiaxial Loading Spectra through Energy-based Damage Models
309
Fatigue life estimation after crack repair in 6061-T651 aluminum alloy using the stop hole technique under mixed mode condition
310
Fatigue Life Estimation and Safety Factor Prediction of a Low Natural Frequency Multi-Material Truss
311
fatigue life estimation based on notch fracture mechanics
312
Fatigue life prediction of an aircraft lug assembly subjected random loading
313
Fatigue life prediction of an aircraft lug assembly subjected random loading
314
Fatigue life prediction of an aircraft lug assembly subjected random loading
315
Fatigue Life Prediction of Notched Specimens Using a new model in the framework of Entropy Generation Theory
316
Fatigue Life Prediction of Steel Alloys under Uniaxial Random Loading using Stress-Based Approach
317
Fatigue Strength Assessment of Components with V-Shaped Notches Based on
318
Fatty acid composition of the marine red algae Dichotomariaobtusatafrom the Persian Gulf
319
Fault Current Limiter Optimal Placement Considering Different Microgrid Operational Modes Using Cuckoo Search Algorithm
320
Fault Current Limiting by Allocating TCSC and UPFC using Particle Swarm Optimization
321
Fault Detectability Condition of Networked Control System with Variable Network-Induced Delay
322
Fault detection and identification on UAV system with CITFA Algorithm Based on Deep Learning
323
Fault Detection and Isolation of Anti-lock Braking System Sensors
324
Fault Detection and predication based on data mining
325
Fault detection and prediction based on Data Mining (case study:robots in Saipa Kashan car factory)
326
Fault Detection in Centrifugal Pumps using Fuzzy Logic and Artificial Immune Network
327
Fault Detection in Distribution Networks by Zernike Moment
328
Fault Detection of a Centrifugal Pump Impeller: Correlation of Pressure Pulsation Characteristics with Casing Vibration Analysis
329
FAULT DETECTION OF A CHEMICAL SYSTEM BY USING LINEAR METHODS
330
Fault Detection of Nonlinear Systems by Parity Relations
331
Fault Detection with Guided Wave in an Aluminum Plate by Simulation and Experiment
332
FAULT DIAGNOSIS OF BELT TRANSMITION ELECTROMOTOR BY VIBRATION CONDOTION MONITORING
333
Fault Diagnosis of Broken Rotor Bars in Induction Motors Using Finite Element Analysis
334
Fault Diagnosis of Electromotor by Using Fault probability Distribution Function and Support Vector Machine
335
Fault Diagnosis of Electromotor of SAR-7 Hydraulic Pump by an Intelligent Combined Method Based on k-Nearest Neighbor and Improved Distance Evaluation
336
Fault Diagnosis of Rotating Machines based on the Enhanced Multi-Scale Convolutional Neural Network Approach
337
Fault diagnosis of the converter furnace exhaust fan,unit 14 with the help of vibration analysisKhatunabad smelter
338
Fault Identification and Forecasting in NPPs Using Computer-based Operator Aid Tool
339
Fault Indicator Location in Distribution System Using Fuzzy Clustering-Based Genetic Algorithm
340
Fault Location Algorithm for Series Compensated Transmission Lines Using Fault Clearing Transients Independent of Line Parameters
341
FAULT RUPTURE PROPAGATION THROUGH ZONED EMBANKMENT DAMS
342
Fault Slip rate: Geodetic vs Geologic time scales (Insight from numerical modeling)
343
Fault Tolerance and Reliability Issues of Wireless Sensor Networks Based on Markov Models
344
Fault Tolerant Control in Direct-Drive PMSG Wind Turbine Systems under Open-Circuit Faults
345
Fault tolerant control in multi-agent systems subject to actuator fault
346
Fault Tolerant Control of Differential Drive Mobile Robots Using Sliding Mode Controller
347
Fault tolerant three dimentional network-on-chip design (3D-NoC): A systematic review
348
Fault-Propagation Analysis: Unveiling Equivalence in Software Mutation Testing
349
Fault-Tolerant Assessment and Enhancement in the Reconfigurable Network-on-Chip
350
Fault-Tolerant Control of Uncertain Linear Systems in the Presence of L∞ Disturbances and Actuator Saturation
351
Fault-Tolerant Tracking Control for a Four-Tank System Benchmark Via Eigenstructure Assignment and Parameter Estimation
352
Fauna of Diplazontinae Viereck (Hym., Ichneumonidae) in Isfahan Province
353
Faunistic of alimentary canal helminthes in native birds of Mazandaran province
354
F-BOUNDED SETS IN FUZZY NORMED SPACES
355
FCBF3Rules: يك روش انتخاب ويژگي در داده هاي چند برچسبي
356
F–CONNECTED SPACES
357
FC-PURE IINJECTIVITY AND FC-PURE FLATNESS
358
FCS-MPC Based Primary Control with Improved Performance for Islanded AC Mircogrids
359
Fe/FeS core/shell nano-particles preparation by thermal method
360
Fe3O4 @ SiO2 @ PolyIonene/Arsenic acid core – shell- shell magnetic nanoparticles as a novel drug nanoparticle and its antibacterial effects
361
Fe3O4 Nanoparticles grafted on microcrystalline cellulose/immidazolium-based ionic liquid: Efficient nanodemulsifire for separation of water in crude oil emulsion
362
Fe3O4@MCM-41@Pd-P2C: as high-efficient and magnetically recoverable Nanocatalyst for the stille coupling reaction
363
Fe3O4@Ni: A High Performance Recyclable Catalyst for Preparation of Oximes
364
Fe3O4@RGO@Au@C Composite with Magnetic Core and Au Enwrapped in Double-Shelled Carbon: An Excellent Catalyst in the Reduction of Nitroarenes and Suzuki–Miyaura Cross-Coupling
365
Fe3O4@SiO2-SO3H nanoparticles as a magnetically green catalyst for the synthesis of spirooxindoles under microwave irradiation
366
Fe3O4@SiO2-SO3H nanoparticles as a magnetically green catalyst for the synthesis of spirooxindoles under microwave irradiation
367
Fe3O4@TiO2@O2PO2(CH2)NHSO3H as a novel nano magnetic catalyst: Application at the preparation of 2-amino-4,6-diphenylnicotinonitriles via anomeric based oxidation
368
Fe3O4-encapsulated ZIF-8 as a Novel Catalyst for Oxidative Desulfurization of a Model Fuel
369
Fear of Irrevocable Biotechnological Hazards in the Developing Countries For the "International Congress of Bioethics, Tehran 2005"
370
Feasibility Analysis of Using Global Positioning System (GPS) For Collecting Dynamic GIS Data
371
Feasibility of E-Marketing Cucumbers in Ilam city from the Perspective of Farmers
372
Feasibility of high-intensity ultrasonic blanching combined with heating for peroxidase inactivation of seedless guava (Psidium guajava L.)
373
Feasibility of Implementing Electronic Human Resource Management (E-HRM) Case Study: Isfahan Municipality
374
Feasibility of Implementing Electronic Human Resource Management (E-HRM) Case Study: Isfahan Municipality
375
Feasibility of installing wind turbines in Qazvin province
376
Feasibility of installing wind turbines in Qazvin province Case study: Jarandagh station
377
Feasibility of Ionic Liquids as Green Solvents for Extraction and Separation of Dysprosium Ions from aqueous Nitrate Solution
378
Feasibility of Power Generation from Municipal Waste and Wind Energy in Bandar-e Anzali County
379
Feasibility of Power Generation from Municipal Waste and Wind Energy in Bandar-e Anzali County
380
Feasibility of solar panel installation at Australian Universities
381
Feasibility of solid-state additive manufacturing in fabrication of functionally graded AA7075/Al2O3 nanocomposite
382
Feasibility of using cement in rammed earth by integrated ANP-GA method
383
Feasibility of using graphite as anode in electrowinning process of zinc metal
384
Feasibility study of bioethanol production from photosynthesis
385
Feasibility Study of Establishment of RFID System in ALI, Iran
386
Feasibility study of extracting electrical energy from OTEC by thermoelectric phenomenon
387
Feasibility Study of Myocardial Perfusion Imaging with Fan-Beam in Comparison of Parallel-Hole Collimator
388
Feasibility study of optimal pattern, restoration and renovation of old textures in Tehran metropolis to reduce the damage caused by crime (Case Study: Tehran 5th District)
389
Feasibility study of preparing skin care formulation with mycosporine-like amino acids extracted from Spirulina platensis
390
Feasibility Study of Radium-223 Production in Tehran Research Reactor for Treatment of Bone Metastases
391
Feasibility study of the use of light weight steel structures in high-seismic regions of Iran using modified APRAM method
392
Feasibility study of using designed and manufactured composite pipes in natural gas pipelines
393
Feasibility Study of Using Thermoelectric Modules for Cooling Photovoltaic Cells
394
Feasibility study of wastewater reuse for irrigation in Isfahan, Iran
395
Feature Bandwidth Extension for Persian Conversational Telephone Speech Recognition
396
Feature Extraction for Detection of Watermarking Algorithm
397
Feature extraction for detection of watermarking algorithm
398
Feature Extraction using Partitioning of Feature Space for Hyperspectral Images Classification
399
Feature representation for speech emotion Recognition
400
Feature Selection for Anti-Cancer Plant Recommendation
401
Feature Selection in Milling Process Utilizing Wavelet Analysis
402
Feature Selection in Multi-label classification through MLQPFS
403
Feature Selection using Modified Imperialist Competitive Algorithm
404
Feature selection using social network techniques
405
Feature Subset Selection and Parameters Optimization for Support Vector Machine in Breast Cancer Diagnosis
406
Feature Subset Selection Using Information Energy and Correlation Coefficients of Hesitant Fuzzy Sets
407
Feature-Based Elderly Behavior Detection and Prediction in Smart Homes
408
FeCl3 catalyzed one-pot solvent-free synthesis of 1-phenyl-1, 2-dihydro-3H-naphtho [1, 2-e] [1, 3] oxazin-3-one
409
FeCl3/nano Al2O3 catalyzed solvent-free synthesis of 2 ، 4 , 6 triaryl pyridines
410
FeCl3-catalized formation of indolizine derivatives via 1,3-dipolar cycloaddition between azomethine ylide (1,3-dipole) and chalcone (electron-poor dienophile)
411
Fe-doped TiO2 Electrospun Nanofibers as an Effective Visible-light-active Photocatalyst
412
Feedback controller design for optimal control of linear time-delay systems via variational iteration method
413
Feedback Error Learning Control of Trajectory Tracking of Nonholonomic Mobile Robot
414
Feedback Linearization and Chaotic Anti-Control of Flexible Joint Manipulator with Experimental Validation
415
Feedback linearization for non-semisimple nilpotent singular vector fields
416
Feedback linearization for non-semisimple nilpotent singular vector fields
417
Feedforward-Feedback PID Control of Elbow Joint Angle for Functional Electrical Stimulation: A Simulation Study
418
Feeding Behavior of Lactating Dairy Cows Fed 1× vs. 4× Daily
419
Female Identity and Narrative Techniques in Everything I Never Told You
420
Female mice Folliculogenesis influenced by Achillea millefolium L.
421
Ferdinand the Anthophile, the Fighting Bull, and the Messiah: An Examination of The Story of Ferdinand and its Adaptations
422
Ferdowsi’s Shahnameh in Poland in the context of friendly Polish - Persian relations
423
Fermionic coherent states and their entanglement
424
Ferricyanide Immobilized Within Organically Modified MCM-41; Application as Electrocatalytic Sensor for Hydrogen Peroxide
425
Ferrocene as a Mediator on Enzymatic Glucose Biosensor
426
Ferroic intelligent materials and their architectural and structural capabilities
427
Fetal and Maternal Dose Assessment for Thyroid Imaging and Therapy in early pregnancy
428
FeTiO3 Catalyzed one-pot synthesis of tetrahydrobenzo[b]pyran derivatives
429
Fiber optical sensors in Geotechnical Engineering
430
Fiber Reinforced Concrete Pavement & Shrinkage
431
Fiber reinforced polymer composites to improve seismic retrofit of masonry
432
Fiber-section modeling of as-built and CFRP retrofitted RC beam-column connections
433
Fibonacci length of two classes of 2-generator p-groups of Nilpotent class 2
434
Fibre-matrix damage modelling of unidirectional carbon/epoxy composite under tensile loading
435
Fictional Minds in On Chesil Beach: An Anti-mimetic Theory of Characterisation
436
Fidelity of quantum states in a simple form
437
Fidelity Of Teleportation Under Imperfect Measurements Through An Isotropic Channel
438
Field Enhancement in a Terahertz Plasmonic Structure and It
439
Field Seepage Tests on Discontinuity Structural Rocks in a Hydropower Project
440
Field Study and CFD Modeling of Four-Sided and One-Sided Prefabricated Windcatchers and Their Efficiency Comparison
441
FIELD STUDY OF PLUME DISPERSION IN A BOUNDARY LAYER IN THE COASTAL AREA (BUSHEHR)
442
Field-Slash Based Relevance Propagation For Web Information Retrieval
443
Field-Slash Based Relevance Propagation For Web Information Retrieval
444
File Transfer in Vehicular Delay Tolerant Networks using Fountain Coding
445
Filter and Absorber based on the one-dimensional photonic crystal structure
446
Filter-and-Forward Relay Design for OFDM-based Multiple Access Relay Channel
447
Filter-and-Forward Strategy for Multiple Access Relay Channel with a Multi-antenna Relay
448
Filter-based emulsification liquid-phase microextraction for efficient determination of amphetamine and methamphetamine in biological and environmental matrices
449
Filter-Based Feature selection for microarray data using Improved Binary Gravitational Search Algorithm
450
Filtering Structure CMOS Distributed Amplifier with Extended Flat Bandwidth and Improved Input Matching Using Coupling Inductors in The Gate Line
451
financial and performance of foreign investment enterprises and performances in developing countries the case of vietnam
452
Financial Distress Prediction Using Adaptive Neuro-Fuzzy Inference System
453
Financial Literacy Training and its Role in the Participation Ratio of SMEs in the Financial Markets
454
Financial market impression in economic development
455
Financial Sensitivity Assessment On Different Approaches Toward LNG Transportation Means
456
Financial Tayyeb Reporting Is A Step Towards Social Responsibility Reporting
457
Financing Urban Projects based on Islamic Criteria in order to Fulfill the Objectives of Economic Jihad
458
Finding an Efficient Solution for Multiobjective Linear Fractional Programming Problems
459
Finding Efficient Solutions for Bilevel Linear Multi-Objective Programming Problems
460
Finding Efficient Solutions for Bilevel Linear Multi-Objective Programming Problems
461
Finding Important Concepts within Ontology
462
Finding Important Concepts within Ontology
463
Finding Integral Distinguisher and Differential Bound on PRESENT cipher based on Mixed Integer Linear Programming
464
Finding modern solutions for coupled Maccari’s system with complex structure with rational techniques
465
Finding Near-Optimal Formation of Cooperative Wheeled Mobile Robots in Payload Transportation
466
Finding Optimal Solutions in Management Problems with use Econometric and Multi-Objective Programming
467
Finding strong defining hyperplanes of DEA-R-Imodel
468
Finding the best arrangement of turbine blades to minimize residual static unbalance
469
Finding the minimum weighted maximal matching of a graph with uncertain weights
470
Finding the optimized lower bound for the variance of unbiased estimators in some well-known families of distributions
471
Finding the Solution of an Specific Nonconvex Fractional Quadratic Problem
472
Findings of Carotid Artery Color Doppler Ultrasonography in Patients WithBehcet Disease
473
Fine migration investigation in reservoirs
474
Fine-Grained Access Control for Hybrid Mobile Applications in Android Using Restricted Paths
475
Fine-grained access control for hybrid mobile applications in Android using restricted paths
476
Fine-Grained Duplex Stainless Steel by Cold Rolling and Reversion/Recrystallization Annealing
477
Fingerprint Authentication Using Multi-Layer Perceptron Neural Network
478
Fingerprint Verification Based on STFT Analysis and Zernike Moments
479
Fingerprint Vulnerability: A Survey
480
Fingerprint Vulnerability: A Survey
481
Fingerprinting of The Lake Urmia Sand Dunes Sediments
482
Fingolimod interacted with the human serum albumin using hydrophobic forces
483
Finite compressed zero divisor graphs and Goldie rings
484
Finite Control Set Model Predictive Control for dc Voltage Balancing in Vienna Rectifier
485
FINITE DIFFERENCE SCHEME TO APPROXIMATE 2D STOCHASTIC ALLEN-CAHN EQUATION OF FRACTIONAL ORDER
486
Finite dimensional Banach spaces with the same normaloid and radial operators
487
Finite Element Artificial Nueral Network analysis of ECAP
488
Finite Element analysis of FRP strengthened grooved concrete beams
489
Finite Element Analysis of Heat Transfer from a Thin Horizontal Disk Buried in Semi-infinite Soil
490
Finite element analysis of interaction between Nitinol stent and peripheral artery: the effect of hyperelastic model
491
Finite Element Analysis of Multi-tiered Reinforced Soil Walls of Gotvand Dam Powerhouse under Earthquake Loading
492
Finite Element Analysis of Pipe Rehabilitation with Polymeric Composites
493
Finite Element Analysis of Piping Composite Joints under Bending Load
494
Finite Element Analysis of Ring Implantation for Keratoconic Cornea Treatment
495
Finite element analysis of stress concentration in titanium dental implant with different thickness of hydroxyapatite coating
496
Finite element analysis of swage autofrettage thick-walled cylinder
497
Finite Element Analysis of Thermo-Mechanical Vibration and Instability of Double Wall Boron Nitride Nanotubes Conveying Fluid Resting on Viscoelastic Medium Using Nonlocal Elasticity Theory
498
Finite Element Analysis of Thermo-Mechanical Vibration and Instability of Single Wall Boron Nitrid Nano Tube Conveying Fluid Embedded In an Elastic Medium Using Nonlocal Elasticity Theory
499
Finite element analysis of unidirectional fibrous polymer composites by considering interfacial debonding
500
Finite element analysis of unidirectional fibrous polymer composites by considering interfacial debonding
501
Finite Element and Experimental Investigation of the Mixed-Mode Fracture in Cement-Prosthesis Interface in the Total Hip Replacement
502
Finite Element Assessment of the Buckling of Composite Grid Stiffened Cylinders Under Axial Compressive Force
503
Finite Element Assessment of the Buckling of Composite Grid Stiffened Cylinders Under Axial Compressive Force
504
Finite Element Investigation on the Behaviour of Open Web Steel Beams Subjected to Fire
505
Finite Element Model Updating Using GA and Static Data for Studying Joints Behavior in Double Layer Grid
506
Finite Element Modeling of Buried FRP Pipe Under Traffic Loads and Internal Pressure
507
Finite Element Modeling of Failure in Composite Adhesive Joints
508
FINITE ELEMENT MODELING OF NONINVASIVE TRANSSKULL ULTRASOUND BRAIN SURGERY
509
Finite Element Modeling of the Free Vibration Behavior of Reinforced Polymers with Carbon Nanotubes
510
Finite Element Modeling of the Ground Vibrations from Underground Train
511
Finite Element Modeling of Thin Composite Plate with Embedded Piezoelectric Active Elements
512
Finite Element Modeling of Thin Composite Plate with Embedded Piezoelectric Active Elements
513
Finite Element Simulation and Experimental Study of Luggage test according to ECE R17 using LS Dyna
514
Finite Element Simulation and Experimental Study of Luggage test according to ECE R17 using LS Dyna
515
Finite Element Simulation and Experimental Study of Luggage test according to ECE R17 using LS Dyna
516
Finite Element Simulation and Experimental Study of Ramp Up and Holding Time on Seat Belt Anchorage Test according to ECE R14 and FMVSS 207
517
Finite Element Simulation and Experimental Study of Ramp Up and Holding Time on Seat Belt Anchorage Test according to ECE R14 and FMVSS 207
518
Finite Element Simulation and Experimental Study of Ramp Up and Holding Time on Seat Belt Anchorage Test according to ECE R14 and FMVSS 207
519
Finite Element Simulation and Experimental Study of Rear Seat Belt Strength According to ECE R14 Using LS-Dyna
520
Finite Element Simulation of Damage Initiation and Propagation in SiC/Ti Composites Subjected to Combined Thermo-mechanical Loadings
521
Finite Element Simulation of Damage Initiation and Propagation in SiC/Ti Composites Subjected to Combined Thermo-mechanical Loadings
522
Finite element simulation of projectile nose effect on impact response of GLARE using LS-DYNA
523
Finite Element Simulation of Randomly Oriented Discontinuous Fiber Composite Rotor Blade with Variable Thickness
524
Finite Element Simulation of Randomly Oriented Discontinuous Fiber Composite Rotor Blade with Variable Thickness
525
Finite element simulation of selective laser melting process for fabrication of metallic lattice materials
526
Finite element simulation of stress distribution through novel duplex thermal barrier coating used in turbine engine
527
Finite element simulation of thermal deformation in bi-stable cylindrical composite shells for morphing applications
528
Finite element simulation of thermal deformation in bi-stable cylindrical composite shells for morphing applications
529
FINITE FAULT SIMULATION OF STRONG GROUND MOTION, FOR THE 2013, SARAVAN-IRAN EARTHQUKAE
530
Finite groups whose common-divisor graph is regular
531
Finite Groups with the Kappe Property
532
Finite mixture model using skew Laplace distribution
533
Finite mixture of generalized semi-parametric models and variable selection
534
Finite monogenic ternary semigroups
535
Finite Population Sampling Designs and IID Samples
536
FINITE PRODUCTS IN PARTIAL MORPHISM CATEGORIES
537
Finite State Machine Based Countermeasure for Cryptographic Algorithms
538
FINITE SYMMETRIC GRAPHS WITH 2-ARC TRANSITIVE QUOTIENTS
539
Finite Time Chattering-Free Control of Chaos via Smooth Second Order Sliding Mode
540
Finite volume element method to solve an advection equation
541
Finite volume symmetrical hybrid WENO schemes for balance laws
542
Finite-element investigation of vehicle speed effects on jointed concrete pavement
543
Finitely Content Modules
544
Finiteness properties of generalized local cohomology modules
545
Finiteness properties of generalized local cohomology modules
546
Finite-Time Boundedness for a Class of Networked Control Systems with Random Packet Dropout and Varying Network-Induced Delay
547
Finite-Time Distributed Error Observer Design for Multi-Agent Systems with Chaotic or Hyper-Chaotic Dynamics
548
Finite-time Fault-Tolerant Control For an Active Suspension System
549
Finite-Time Guidance Laws for Landing Process of a Spacecraft Subjected to Disturbances
550
Finite-Time Stabilization of Networked Control Systems with Randomly Varying Communication Delays
551
Fire and Smoke Tracking and Detection in Videos based on Pyramid Convolutional Deep Learning
552
Fire Detection in the Field of Color and Fire Motion, Using the Differential Method
553
Fire Safety Qualification in Solar Photovoltaic Modules
554
Fire Sprinklers; General Survey of Features and Types
555
Fire Water Storage Tank Internal Cathodic Protection System Resistance Calculation Using Finite Element Analysis
556
Firing Angle Control of TCSC Using Emotional Learning Based Fuzzy Controller
557
First - principles investigation of graphene sheet for sensing carbon dioxide
558
First and Second Law Analysis of Internal Combustion Engine Cogeneration System
559
First and Second Law Analysis of Internal Combustion Engine Cogeneration System
560
First Hachschild Cohomology Group of Triangular Banach Algebras on Induced Semigroup Algebras
561
First label-free carbohydrate-based electrochemical sensor to detect Escherichia coli pathogenic bacteria using affinity between adhesion FimH and mannose on the glassy carbon electrode
562
First molecular characterization of Hydatigera krepkogorski (Schulz & Landa 1934) from Rhombomys opimus in Iran
563
First Principle Investigations of Bulk Properties and Catalytic Reactions for Cubic Perovskite Catalyst on OCM High Temperature Process
564
First Principles Calculation of Current-Voltage Characteristics of Defected Zigzag Graphene Nanoribons
565
First Principles Calculation to Investigate of Temperature and Environmental Effect on the EPR Properties of α-Aminoisobutyric acid Radicals in Aqueous Solution at Different pH Values
566
First principles investigation on Cu2(OH)PO4/g-C3N4 composite
567
First report of Cryptosporidium spp. identification in Iranian dogs using semi-nested PCR
568
First report of imported case of visceral leishmaniasis due to Leishmania donovani complex in Iran
569
First Report of upper and lower respiratory infection due to Lophomonas blattarum an emerging pathogen in Iran
570
First-Order Separable Spatial Gegenbauer Autoregressive (SSGAR(1,1)) Model
571
First-principles study of phosphorene and graphene nanoflakes under the effect of external electric field as an anode material for Li-ion battery
572
First-Principles Study of the Structural and the Electronic Properties of the Lead-Halide-Based Organic Perovskites (CH3NH3)PbX3,( CH(NH2)2)PbX3
573
Fiscal Policy and Business Cycle in Iran: a DSGE Approach
574
Fiscal Policy and Economic Growth A Case Study of IRAN
575
Fischer-Tropsch Synthesis in Microreactors, a Geometrical Study
576
Fischer-Tropsch synthesis over iron-based catalysts supported on ZSM-5 zeolite for production of hydrocarbons
577
Fischer-Tropsch synthesis over iron-based catalysts supported on ZSM-5 zeolite for production of hydrocarbons
578
Fischer-Tropsch synthesis over iron-based catalysts supported on ZSM-5 zeolite for production of hydrocarbons
579
Fish bone waste using for aesthetic art
580
Fishing Lines-based Artificial Muscles for Robotic Applications
581
Fitzpatrick Transform of Sum
582
FIVE CM SOIL TEMPERATURE ESTIMATION USING LANDSAT IMAGES AND WEATHER SYNOPTIC STATION DATA
583
Five estimation methods for reliability function of weighted exponential distribution
584
Five Year Developing Program (FYDP) And Evolution of Problem loans In Iran: An Empirical Investigation
585
Five-Level Single-DC Source Inverter with Adjustable DC-Link Voltage
586
Fixed - bed column adsorptive removal of Cr (VI) using silver oxide/sawdust nanocomposite
587
FIXED AND COMMON FIXED POINTS OF SOME CONTRACTIONS IN UNIFORM SPACES
588
Fixed place ideal
589
Fixed point algebra of the tensor product of ultragraph $C^{*}$-algebras
590
FIXED POINT AND ASYMPTOTICAL CENTER OF NONEXPANSIVE MAPS
591
Fixed point and common fixed point theorems on b-metric spaces
592
Fixed Point For Generalized Multi-Valued Almost Contraction On Cone Metric Spaces
593
FIXED POINT OF INTEGRAL TYPE MAPPING ANDAPPLICATION
594
Fixed Point Of Multivalued Contractions Between Uniform Spaces Endowed With A Graph
595
Fixed point results for set- valued mappings of contractive type
596
Fixed point results for set-contractions on metric spaces with a directed graph
597
Fixed point results for set-valued mappings of contractive type
598
Fixed point results for weakly Hardy-Rogers contractions in ordered metric spaces
599
Fixed point results of contractions in modular metric spaces
600
FIXED POINT RESULTS ON A METRIC SPACE ENDOWED WITH A FINITE NUMBER OF GRAPHS
601
FIXED POINT RESULTS ON B-METRIC ORDERED SPACES
602
FIXED POINT SUBALGEBRAS OF INVARIANT AFFINE REFLECTION ALGEBRAS
603
Fixed Point Theorem in Partial Metric Spaces
604
FIXED POINT THEOREMS FOR A CLASS OF GENERALIZED NONEXPANSIVE MAPPINGS
605
Fixed point theorems for a new class of nonlinear mappings in Hilbert spaces
606
FIXED POINT THEOREMS FOR CYCLIC WEAK CONTRACTIONS IN MODULAR METRIC SPACES
607
Fixed point theorems for G-pata operators on metric spaces endowed with a graph
608
Fixed point theorems for G-pata operators on metric spaces endowed with a graph
609
Fixed point theorems for multi-valued mappings in complex-valued metric spaces by rational type contraction
610
FIXED POINT THEOREMS FOR MULTIVALUED MAPPINGS IN FUZZY METRIC SPACES
611
fixed point theorems for rational geraghty contractive mapping in b-metric spaces and applications in a system of integral equations
612
FIXED POINT THEOREMS FOR θ-φ-CONTRACTION ON COMPLETE b-METRIC SPACES
613
FIXED POINT THEOREMS IN ORDERED MODULAR SPACES AND APPLICATIONS TO INTEGRAL EQUATIONS
614
FIXED POINT THEOREMS IN S-METRIC SPACES
615
Fixed point theory for multivalued nonexpansive mappings and Banach ultrapowers
616
FIXED POINTS FOR RATIONAL F-CONTRACTIONS AND WEAK-WARDOWSKI CONTRACTIONS IN AN EXTENDED MODULAR S-METRIC SPACE
617
FIXED POINTS OF GENERALIZED (a;B )-ADMISSIBLE MEIR-KEELER CONTRACTION MAPPINGS ON PARTIAL b-METRIC SPACES
618
Fixed points of mixed monotone operators for two-term nonlinear fractional differential equations
619
Fixed Points of Multi-valued Mappings on Modular Spaces
620
Flag manifold Feature selection by matrix factorization
621
Flagship species in Hawraman region: Critically endangered newt, Neurergus derjugini Nesterov, 1916 (Urodela: Salamandridae)
622
Flame atomic absorption spectrometric determination of lead and cadmium after solid phase extraction using magnetic multi-walled carbon nanotubes modified with polythiophene
623
Flame atomic absorption spectrometric determination of trace amounts of cadmium after dispersive solid phase microextraction using modified magnetic graphene oxide as the sorbent
624
Flame retardancy and physical properties of poly (vinyl alcohol) chemically modified by urea condensate compounds
625
Flameless Burners and Its First Apllication in Iran
626
Flammability reduction of flexible polyurethane foams using GO and LDH nanoparticles-based multilayer coatings
627
Flappy Bird with Deep Reinforcement Learning
628
Flavonoid Content Correlation With Scavenging Of Nitric Oxide Radicals,Ferric Reducing Power And Cupric Chelating Activity Of Catharanthus roseus L.
629
flaw detection in concrete structures by advanced nondestructive test method impact echo
630
Flexible and wire shaped supercapacitor material based on nanoflakes Co(OH)2@nanosheets Ni(OH)2/3D nickel fibers
631
Flexible Approach for Optimization of Distance and Overcurrent Protection Coordination
632
Flexible Capacitive Sensors based on paper sheets
633
Flexible cation exchange membrane based on modified K-Carrageenan/PVA double network hydrogel with high ionic conductivity
634
Flexible cellulose/PEGEMA based solid and gel polymer electrolytes
635
Flexible CPPI in Regime Switching Models
636
Flexible job shop scheduling problem with preventive maintenance tasks and work in process constraint
637
Flexible job shop scheduling with novel imperialist competitive algorithm
638
Flexible Soccer Video Summarization in Compressed Domain
639
Flexoelectric coefficients dependence to temperature in liquid crystal
640
Flexural and Inter-Laminar Shear Strength of Silica Fume Nanoparticles/Basalt Fibers/Epoxy Multiscale Composites
641
Flexural behavior of TRC composites
642
Flexural fatigue model for carbon nanofiber/chopped strand mat/epoxy nanocomposites
643
Flexural fatigue model for carbon nanofiber/chopped strand mat/epoxy nanocomposites
644
Flexural properties of basalt fiber/epoxy composites with nano-ZrO2 enhanced matrix
645
Flexural Properties of Green Composites made of Latania Natural fiber and PP/EPDM Composites
646
Flexural Properties of Green Composites made of Latania Natural fiber and PP/EPDM Composites
647
Flexural properties of TETA-cured epoxy resin modified with nanoclay
648
Flexural properties of TETA-cured epoxy resin modified with nanoclay
649
Flexural strength and fracture behavior of ZrB2-HfB2-SiC-MoSi2 and ZrB2-HfB2-SiC-B4C composites produced by pressureless sintering method
650
FLEXURAL STRENGTH AND MOMENT-CURVATURE CHARACTERISTICS OF SLENDER RECTANGULAR RC WALL SECTIONS
651
Flexural strength of dental materials evaluated by short-beam-uniaxiall and piston-on-three ball biaxial static tests
652
Flexure Behaviour and Failure Mechanism of Bidirectional Glass- Polyester Composites Formed by Resin Transfer Moulding (RTM)
653
FLOATATION OF ORGANIC DROP-DISPERSIVE LIQUID-LIQUID MICROEXTRACTION FOR SEPARATION OF MORIN
654
FLOATATION OF ORGANIC DROP-DISPERSIVE LIQUID-LIQUID MICROEXTRACTION FOR SEPARATION OF MORIN
655
Flood Damage Analysis Computerize Method on Agriculture Floodplain
656
flood plain analysis in downstream of golestan -1 dam with regard to damping efficiency of the reservoir
657
FLOOD RISK ANALYSIS OF DAMS WITH CONVENTIONAL and FUZZY LOGIC APPROACHES
658
Flood risk assessment due to dam failure in southern Qazvin province
659
Flooding Velocity in Pulsed Sieve Perforated plate Extraction Columns in withoutMass Transfer Systems
660
Flow about a cam shape cylinder between parallel walls
661
Flow Assurance in Pipeline-Riser System Using OLGA Software
662
FLOW CHARACTERISTICS AROUND ON SQUARE CYLINDERS IN A TURBULENT BOUNDARY LAYER
663
Flow condensation heat transfer of R134a inside the tubes filled with hydrophilic metal foam: An experimental approach
664
Flow Control and Heat Transfer in a Squared Room Applying Thin Obstacles at Walls
665
Flow Distribution of Parallel Micro-Channels in Different Levels
666
Flow Field Analysis of a Synthetic Jet in the Presence of a Crossflow Using LES Approach
667
Flow Field and Heat Transfer in an impingement Synthetic Jet: Application of Different Turbulence Models
668
Flow field of rarefied gases in suddenly expanded/contracted micro-and nanochannels using direct simulation Monte Carlo method
669
FLOW FIELD STRUCTURE AND TEMPERATURE DISTRIBUTION IN LOW-Pr MELT ROTATING WITH ITS CONTAINER
670
Flow induced vibration and instability of double carbon nanotube system
671
Flow Pattern and Delta Characteristics in a Dam Reservoir
672
Flow Pattern in a Mild Ingoing Meander River Bend
673
Flow3D بررسي تاثير تغييرات هندسي بر غلظت رسوبي با دبي ثابت در آبگير 90 درجه با استفاده از نرم افزار
674
Flowing Material Balance Equations for Waterdrive Oil Reservoirs
675
Flowshop scheduling via bi-objective parallel genetic algorithm
676
Fluctuation of the water level of the Victoria reservoir and its influence on water level of dug wells in Wewegama village
677
Fluctuation relation for heat exchange in Markovian open quantum systems
678
Fluid inclusion and stable isotope constraints on the ore fluids in the Aliabad-Khanchy epithermal base metal deposit, NW Iran
679
Fluid inclusion constraints on the origin of Au-Ag-base-metal mineralization in the Biga Peninsula, NW Turkey
680
Fluid inclusion constraints on the origin of Au-Ag-base-metal mineralization in the Biga Peninsula, NW Turkey
681
Fluid Selection of Organic Rankine Cycle for Waste Heat Recovery from Engine Test Cell
682
Fluid selection of Rankine cycle for utilization of waste heat from GT-MHR: the energy and exergy viewpoints
683
fluid structure interaction problems based on velocity potential formulation
684
Fluid-fluid phononic crystal sensor for the detection of ethanol concentration in water
685
Fluidization Behavior of Binary Titania-Silica Nanoparticle Mixtures in the Presence of Alcohols
686
Fluidization Behavior of Ca(OH)2 by Adding SiO2 Nanoparticles in the Presence of Alcohols
687
Fluorescence detection of mercury ions by cysteine-functionalized carbon quantum dots as a nanosensing probe
688
Fluorescence Quenching of Human Serum Albumin by Polyacrylamide Grafted onto Sodium Alginate Capped ZnS Quantum Dots
689
Fluorescence Study of Zn(II) Complexes with Salophen-Type Ligands
690
Fluorescent and thermal properties of self-colored waterborne polyurethane based on naphthalimide dye
691
Fluorescent carbon quantum dots for simple and fast detection of Cyanocobalamin
692
Fluorescent Polymer Nanoparticles as High-Security Anti-counterfeiting Ink
693
Fluorescent Polymer Nanoparticles as pH Sensor platforms
694
Fluoride Removal in Wastewater Using Nano-Composite Hydrogel
695
Fluorimetric Determination of Ibuprofen in Real Samples by a New Two liquid-phase Microextraction Method
696
Fluorinated Alumina Catalysts for conversion of CCl2F-CClF2 (CFC-113) to CF3CH2F (HFC-134a)
697
FLUORINE BONDS, ARE THEY HALOGEN BONDS
698
Fluorine impact on the rare earth elements composition of Iranian peraluminous S-type granites
699
Fluoroalcohol-water two-phase systems: A new green solvent for organic synthesis
700
Flutter and Limit Cycle Oscillation Control of a Nonlinear Wing with Piezoelectric Actuators Using SDRE Method
701
Flux and Torque Control of Synchronous Reluctance Motor Based on Second Order Sliding Mode Method
702
Flux assisted tungsten inert gas welding process optimization using design of experiments approach and heuristic algorithm
703
Fluxgate قايسه پارامترهاي قابليت اطمينان مدارهاي مختلف زيرسيستم الكترونيك حسگر مغناطيسي
704
Flying Capacitor Clamped Current Source Inverter with Improved Reliability
705
Flying Capacitor Multicell Converter Based D-STATCOM
706
FMEA: مبتني بر هزينه دوره عمر
707
FMNV continuous non-malleable encoding scheme is more efficient than believed
708
FMNV Continuous Non-malleable Encoding Scheme is More Efficient Than Believed
709
Focusing on Collaborative Strategic Reading Strategy: A Study on EFL Learners Reading Comprehension
710
Focusing on the Comprehension Difficulty of Active and DifferentTypes of Passive Sentences for Intermediate EFL Learners: AComparative Study
711
Focusing Properties of Graded Index Photonic Crystal Structures Made of Material with Different Refractive Index
712
Fog-Harvesting potential of metal coated polyester fabrics
713
Fokker-Planck equation of Schramm-Loewner Evolution in Low-Dimensional Systems
714
Folate decorated Gold nanoparticles for differentiation of cancer and normal cells
715
Folate modified chitosan enclosed mesoporous silica nanoparticles for tumor targeted drug delivery
716
Fold Bifurcation in a host-parasitoid model with strong Allee effect
717
Folder Classification of Urdu and Hindi Language E-mail Messages
718
Folding Theory for Integral and Boolean Ideals in BL-algebras
719
Folklore and the Qur’an: A Functionalist Study of Alan Dunde’s Fables of the Ancients? Folklore in the Qur’an
720
Follow up of patients with follicular differentiated thyroid carcinoma
721
Following up the plasticity of auditory nerve by ECAP in patients with AN/AD after cochlear implant
722
Following, Surrounding and Hunting an Escaping Target by Stochastic Control of Swarm in Multi-Agent Systems
723
Follow-up Application for Self-reporting of Clinical Symptoms in Lung Cancer
724
Follow-up Application for Self-reporting of Clinical Symptoms in Lung Cancer
725
Follow-up Moves in Compliment IRF: A Comparison between Native and Non-native Speakers of English
726
Follow-up Moves in Compliment IRF: A Comparison between Native and Non-native Speakers of English
727
Font Recognition Using Variogram Fractal Dimension
728
Food Effects in Ahmad Mahmud s Hamsayeha
729
FOOD INSECURITY IN NIGERIA: PROBLEMS AND SOLUTIONS
730
FOOD INSECURITY IN NIGERIA: PROBLEMS AND SOLUTIONS
731
Football Optimization: An Algorithm for Optimization Inspired by Football game
732
Football Player Detection and Tracking by Coupled Kalman Filter, Training Algorithm and Object Detection Methods---
733
Forage Productivity and Biological Nitrogen Fixation (BNF) in Corn-Soybean Intercropping with Integrated Nutrient in Tropical
734
Force Tracking Impedance Control of Robot-Tissue Interaction With a Hunt-Crosseley Model
735
Forced convection of CuO/water nanofluid in Horizontal Annuluses with rotating inner cylinder
736
Forced Vibration Analysis of Functionally Graded Plates Using Extended Kantorovich Method
737
Forced vibration of a cantilever microbeam with free boundary approach
738
Forced vibration of a cantilever microbeam with free boundary approach
739
Forced vibration of sandwich beam embedded with SMA wires: higher-order approach
740
Forced vibration response of Timoshenko beam subject to a concentrated moving load using rectangular impulse load
741
Forced Vibration Test of the Railway Track by Using the Rotating Eccentric Mass Exciter
742
FORCING LINEARITY NUMBER FOR MODULES
743
Forecasting Electricity Consumption in Tehran City Using Data Mining Techniques
744
FORECASTING FUZZY TIME SERIES WITH NARX NEURAL NETWORK
745
Forecasting International natural Gas Prices with Box-Jenkins Method
746
Forecasting Iran’s Natural Gas Demand in Household and Commercial Sectors based on Fuzzy Logic Inference System
747
Forecasting Natural Gas Consumption in Iran; Using a Combined Mathematical Approach
748
Forecasting of carbon black nanoparticles preferential absorption in the reactive mixture of Epoxy/PMMA
749
FORECASTING OF LARGE PEAK GROUND ACCELERATION USING COACTIVE ANFIS and SVM NEURAL NETWORK
750
Forecasting of petroleum-based energy consumption in Iran using Artificial Neural Network (ANN)
751
Foregrounding From Russian Formalism to Cognitive Poetics: Foregrounding in Different Guises at Different Levels
752
Foreign Body and The Ontological Sensibility in The Black Prince
753
Foreign body detection approaches in food products
754
Foreign body impaction in a foal: a case report
755
Foreign direct investment, their impact on the economic development of Albania
756
Foreign Language Learners Dropping out of Language Classes: Honoring Dropouts’ Voice
757
Foreign language Literacy
758
Foreign Policy of Iran and the Environmental Crisis
759
Foreign trade and energy consumption in Eco: a dynamic econometric study
760
Foreignisation or Domestication: An Inference from Quranic Revelations
761
Foresight of cobranding in constructional material cluster with roadmapping approach
762
Forgetting, the Strategy of Knowledge Management in Modern Organizations
763
Form and Function of Citations in Discussion Sections of Research Articles
764
Form and Meaning of Verbs in Problem Statement Subsections of PhD Dissertations in English Language Teaching
765
Formal modelling and performance evaluation of puzzle type computer game using colored petri net
766
Formaldehyde degradation by Ralstonia eutropha using Artificial Neural Network technique
767
Formant Transitions in the Fluent Speech of Farsi-Speaking People Who Stutter
768
Formation and recovery behavior of hetero-nanostructured metals processed by high-pressure torsion
769
Formation Control for Unmanned Aerial Vehicles With Markovian Switching Network Topologies
770
Formation Damage Analysis of Organic Acids with Limestone Rocks during Acidizing: A Case Study on an Iranian Carbonate Formations
771
Formation Damage Treatment in Horizontal Wells
772
Formation of Aerobic Granules Using Industrial Wastewater
773
FORMATION OF BIOCOMPATIBLE BONE CEMENT (NANO HYDROXYAPATITE BASE) AT 37˚C AT VARIOUS REMINDING TIMES IN SIMULATED BODY FLUID (SBF)
774
Formation of Cu-Zr-Al-Ta In-Situ Bulk Metallic Glass Composite
775
Formation of globular structure in A357 aluminum alloy via a near-liquiduscasting (NLC) route
776
Formation of high-performance forward osmosis membranes using nanoparticles
777
Formation of iPP Microporous membranes via thermally induced phase separation: Effect of Polymer concentration on membrane morphology
778
Formation of modern and ancient soils in loess deposits of northern Iran
779
Formation of Nanostructured Thin Films at Liquid- Liquid Interface and Their Applications in the Organic Dye Degradation
780
Formation of nano-structured tribolayer on Ti 6Al 4V during sliding in a phosphate buffer saline solution
781
Formation of nano-thin TiO2 layer on ceramic support and study the photocatalytic properties
782
Formation of Ni-Nb layered structure on Al substrate by ball milling
783
Formation of Sub Grains During Friction Stir Welding of Gas pipes
784
Formative Assessment and Feedback as Predictors of Student Engagement
785
Formative Assessment in the EFL Context of Kermanshah High Schools :teachersʹ familiarity and application
786
FORMIROVANIJA KOMMUNIKATIVNOJ KOMPETENCII IRANSKIH STUDENTOV POSREDSTVOM MULʹTIMEDIJNYH TEHNOLOGIJ
787
Formula Development for Rubber Products Using Statistical Mixture Design of Experiment
788
Formulation and characterization of PEG-Nano Liposomes labeled with 99mTc-HMPAO,for scintigraphic Imaging of Blood Pool in animal mode
789
Formulation of a Polymeric PLGA-Injectable Implant Delivery System for Controlled Release of Famotidine
790
Formulation of a Polymeric PLGA-Injectable Implant Delivery System for Controlled Release of Famotidine
791
Formulation of temperature-sensitive pegylated doxorubicin nanoliposomes and investigation of antitumor effects in C26 cell line
792
Formylation of Amines catalysed by Co3O4 under solvent-free condition
793
fortification of food products by omega 3 fatty acids
794
Forward Directivity Effects on Seismic Response of SDOF System Considering Soil-Structure Interaction
795
Fossil Fuels Depletion in the World (challenges and solutions)
796
Fossil Locality Predictive Model Using GIS RS
797
Fostering The Acquisition of Phrasal Verbs Through Task-Induced Involvement Load
798
Fostering Vocabulary Knowledge of Iranian Learners through MALL: A Longitudinal Growth Modelling Analysis
799
Foucauldian Concept of Madness in Parvin Etesami’s the Mad and the Chain
800
Fouling and Biomass Growth in Membrane Bioreactor (MBR)
801
Fouling-resistant modification of PVDF membrane via surface-initiated atom transfer radical polymerization for emulsified oil/water separation
802
Four different methods of acrylic acid grafting on PLA nonwoven for further layer-by-layer modification
803
Four elements of fiction (character, theme, point of view, dialogue) in the novel masters Qchasaz Yasharkmal
804
Four-Bed Pressure Swing Adsorption for Oxygen Separation from Air with Zeolite 13X
805
Four-Bed Pressure Swing Adsorption for Oxygen Separation from Air with Zeolite 13X
806
Fourier Like Systems, Frame of Translates and their Oblique Duals on LCA-groups
807
Fourier method for Solving nonlinear parabolic equation by using piecewise functions
808
Four-Layer Graphene System’s Optical Conductivity with Compose mono-mono-mono-mono , at Different Broadening Widths
809
Four-Stage Cascaded Predictive Control for Zero-Sequence Current Suppression of Open-End Winding Induction Motor
810
Four-Switch Three-Phase Static VAR Compensator with Capacitor Voltage Offset Suppression
811
Fourth Order Dynamic Model for a Single Spool Turbofan Engine
812
Fourth Order Trajectory Tracking Control of a Quadrotor
813
F-PERMUTATIONS MATRICES
814
FPGA implementation of Inverted LSB Image Steganography
815
FPGA Implementation of Power and Area Efficient Compressed Sensing for Multi-Channel ECG Compression
816
Fractals–A New Way To Multiband Antenna Arrays
817
Fractal-Wavelet Classifier as a QGIS Plugin and Python program for Geochemical anomalies
818
Fractional Hermite–Hadamard inequality for quasi-convex stochastic processes and quasi-convex functions
819
Fractional Hermite–Hadamard inequality for quasi-convex stochastic processes and quasi-convex functions
820
Fractional infinite-horizon optimal control problems with a new definition of adaptive derivative and a feed forward neural networkscheme
821
FRACTIONAL LAGRANGIAN FORMALISM FOR HIGH ORDER CAPUTO DERIVATIVES
822
Fractional Modelling of Lanchester’s Equation
823
Fractional Modelling of Lanchester’s Equation
824
Fractional optimal control of carbon dioxide emissions
825
Fractional Optimal Control Problems with Neural Network Approach
826
Fractional optimal control problems with a new definition of fractional derivative
827
Fractional optimal control using B-splines
828
Fractional optimal control using B-splines
829
Fractional Order Adaptive Fuzzy Terminal Sliding Mode Controller Design for a Knee Joint Orthosis with Nonlinear Disturbance Observer
830
Fractional Order Sliding Mode Blood Glucose Control Using Functions Approximation Techniques
831
Fractional Order Sliding Mode Guidance Law: Improving Performance and Robustness
832
Fractional-order Bernoulli wavelets for solving the fractional Bagley-Torvik equation arising in fluid mechanics
833
Fractional-order Bernoulli wavelets for solving the fractional Bagley-Torvik equation arising in fluid mechanics
834
Fractional-order B-spline functions for solving fractional-order differential equations
835
Fractional-order PI stabilization of first order systems with time delay via Hermite-Biehler theorem: an analytical approach
836
Fractionated crystallization in the blends of nylon-6 with plasticized poly (vinyl butyral)
837
Fracture analysis of blunt V-notched PMMA under compression-shear loading
838
Fracture analysis of blunt V-notched PMMA under compression-shear loading
839
Fracture analysis of blunt V-notched PMMA under compressive-shear loading
840
Fracture Modes in Resistance Spot Welding of AISI 316 Stainless Steel Sheets
841
Fracture of Alloy Steels with Temperature Dependent Material Properties under Thermal Gradient and Cryogenic Temperature
842
Fracture of Stainless Steels with Temperature Dependent Material Properties under Thermal Gradient and Cryogenic Temperature
843
Fracture of Stainless Steels with Temperature Dependent Material Properties under Thermal Gradient and Cryogenic Temperature
844
Fracture Resistance and Strain Energy Status in Bone Tissue Grown on Carbon Nanotube Scaffold instead of Collagen Fiber
845
Fracture Studies of PP/PC/SEBS Ternary Blends: the Effects of Core-Shell Particles
846
Fracture studies of PP/PC/SEBS Ternary Blends: the effects of SEBS content
847
Fracture surface study of the Al-Gr composite homogenized in the liquid produced by SPS
848
Fracture surface study of the Al-Gr composite homogenized in the liquid produced by SPS
849
Fracture toughness measurement of curved fiber reinforced composites; experimental approach
850
Fracture toughness measurement of curved fiber reinforced composites; experimental approach
851
Fracture toughness of pure copper sheet processed by constrained groove pressing (CGP)
852
Fragility Assessment of a Low-Rise Building with Plan Irregularities under Strong Seismic Motions
853
Fragility Assessment of Masonry-Infilled RC Frames Strengthened by HPFRCC
854
FRAGILITY-BASED SEIMIC ASSESSMENT OF IRANIAN RC BUILDINGS
855
FRAGMENTATION AND IONIZATION OF CYSTEINE IN CORONA DISCHARGE ION MOBILITY SPECTROMETRY
856
Fragrance Volatiles Variation of oil Rose (Rosa damascena Mill.) During Flower Development
857
Frame Line Quantity Effects on the Yielding Base Shear Force and Yielding Displacement of Outrigger Braced Structures
858
Frame theory and reproducing kernel Hilbert spaces
859
Frattini Subgroup Of GLn(D) over real closed fields
860
Frechet Differentiability and The Gradient of The Cost Functional Of An Inverse Source Problem
861
FREDERICKS TRANSITION IN TWISTED CHIRAL NEMATIC DOPED WITH MAGNETIC NANOPARTICLES
862
FREDHOLM MODULAR OPERATORS WITH COEFFICIENTS IN PRO-C*-ALGEBRAS
863
Fredholm property of a three-dimensional Helmholtz equation with nonlocal boundary conditions
864
Fredholm Separating operators on Regular Banach Function Algebras
865
Free and forced vibration analysis of FG plates using refined plate theory and Airy stress function
866
Free functor from the category of G-nominal sets to G-01-nominal sets
867
Free space optical communications using concentric vortex beams
868
Free transverse Vibration analysis of rectangular plate with multiple line-concentrated mass using DQEM
869
Free Vibration Analysis of a Debonded Sandwich Beam Using Extended Higher Order Sandwich Panels Theory
870
Free vibration analysis of a porous beam under subtangential force
871
Free vibration analysis of a rotating thick circular cylindrical shell with various boundary conditions
872
Free Vibration Analysis of Braced Tubes in Tall Buildings
873
Free Vibration Analysis of Combined System of Framed Tube and Shear Wall in Tall Buildings
874
Free vibration analysis of composite beam with different boundary condition and considering the effect of Poisson s ratio
875
Free vibration analysis of functionally graded conical shell with variable thickness resting on elastic foundation
876
Free vibration analysis of functionally graded nanocomposite beams reinforced by randomly oriented carbon nanotube
877
Free Vibration Analysis of Functionally Graded Rec- tangular Plates Carrying a Distributed patch Mass with Generalized Differential Quadrature Method
878
Free Vibration Analysis of Functionally Graded Truncated Conical Shell with Lengthwise Material Variation
879
Free vibration analysis of non-uniform Euler–Bernoulli beams by Differential Quadrature Element Method (DQEM)
880
Free Vibration Analysis of Rotating Composite Beam Using Dimensional Reduction Method
881
Free Vibration Analysis of Rotating Composite Beam Using Dimensional Reduction Method
882
Free vibration analysis of sandwich beams with auxetic core and CNT-reinforced nanocomposite face sheets using GDQ method
883
Free Vibration Analysis of Shear Deformable Beams Resting
884
Free Vibration Analysis of Thick Composite Cylindrical Shells Using A New Refined Higher-Order Shell Theory
885
Free Vibration Analysis of Thick Plates Using Finite Element Method Based on Two-Variable Plate Theory
886
Free Vibration Analysis of Transversely Isotropic Plate Coupled with Open Circuit Piezoelectric Layers
887
Free Vibration and Sensitivity Analysis of the Nonlinear Clamped-Clamped Beam as a MEMS device
888
Free Vibration Behavior of Grid Stiffened Composite Plates with Various Boundary Conditions
889
Free Vibration of a Timoshenko Hybrid Composite Beam Considering the Rayleigh–Ritz Method
890
Free vibration of single layer graphene sheets by using an equivalent modal analysis approach
891
Free Vibrational Behavior of Annular Plates
892
Free Vibrations of a Micro/Nano Spherical Shell Based on Modified Couple Stress Theory
893
Free Vibrations of a Micro/Nano Spherical Shell Based on Modified Couple Stress Theory
894
Free Vibrations of a Micro/Nano Spherical Shell Based on Modified Couple Stress Theory
895
Free-binder CoNiMn LDH/nickel foam electrodes for supercapacitor and water splitting applications
896
Free-Chattering Robust Finite Time Tracking for Connected Double Integrator Nonlinear Systems
897
Free-Surface Hydrodynamic Analysis of Floating Offshore Structures (FOS) Using Multiphase Flow Modeling
898
Freezing-Thawing Effects on the Physico-mechanical Properties of Ankara Grey Clay
899
Fremdwahrnehmung und eigene Identität. Wie kann die Literatur fremder Kulturen die eigene geistige Heimat erweitern
900
Frequency analysis of a FGM micro-beam subjected to subtangential forces
901
Frequency Analysis of FG-GNPs Reinforced Metal Foam Nanocomposite Sector Plates via GDQM
902
Frequency analysis of orthotropic Kelvin-Voigt viscoelastic circular and elliptical nanoplates using boundary characteristic orthogonal polynomials and Rayleigh-Ritz method
903
Frequency analysis of orthotropic Kelvin-Voigt viscoelastic circular and elliptical nanoplates using boundary characteristic orthogonal polynomials and Rayleigh-Ritz method
904
Frequency Analysis of Orthotropic Kelvin-Voigt Viscoelastic Circular and Elliptical Nanoplates Using Boundary Characteristic Orthogonal Polynomials and Rayleigh-Ritz Method
905
Frequency and Effectiveness of Communication Strategies among Iranian Students
906
Frequency and Function of a few English Structures and Itemsin Informal Letters Corpus of Native Speakers and English Learners
907
FREQUENCY CONTENTS OF STRONG MOTIONS FROM ROMANIAN SUBCRUSTAL EARTHQUAKES
908
Frequency Control of Voltage Source Inverter-Based Microgrids Using a New Model Predictive Control
909
Frequency Control of Voltage Source Inverter-Based Microgrids Using a New Model Predictive Control
910
Frequency Controller Design for Islanded Microgrid By Multi-Objective LMI Based Approach
911
Frequency Dependency of Laboratory Measurement of Maximum Shear Wave Velocity by Bender Elements
912
Frequency determination of Sarcocystis in samples collected from slaughtered sheep using squashed technique and digestion method in Ardabil,Northwestern Iran
913
Frequency effect on Carbon nanotube growth by arc discharge method and its electrical characteristics
914
Frequency mites of suborder Actinedida associated with the rose in Qorveh
915
Frequency of Cholelithiasis in Patients With Beta-Thalassemia Intermedia
916
Frequency of intestinal parasites in patients with gastrointestinal tract cancer under treatment versus control group,referred to therapeutic and oncology centers of Mashhad during 2014-2016
917
Frequency of intestinal parasites in tuberculosis individuals referred to the hospital of Masih- daneshvari,Tehran,2016-2017
918
Frequency of Intestinal Parasitic Infections among patients referred to Farabi medical center 2012-2016
919
Frequency of Intestinal Parasitic Infections among patients referred to Ghahderijan Sina Laboratory during 2014-2016
920
Frequency of intestinal protozoan parasites among zoo animal in Iran
921
Frequency of Latent Toxoplasmosis in Pregnant Women with Autoimmune Thyroiditis Diseases,Vising Hospitals Affiliated to Iran University of Medical Sciences in 2015-2016
922
Frequency of Microsporidial Infection in Immunocompromised Patients with Staining and Molecular Methods Based on Internal Transcribed Spacer Region Gene in Two Cities of Southwest Iran during 2013-2014
923
FREQUENCY OPTIMIZATION OF CONCRETE ARCH DAMS USING THE RESULTS OF VIBRATION TESTS and MATHEMATICAL MODEL
924
Frequency Response Features of a Multi-Objective Wind Turbine Transformer Design
925
Frequency Response Modelling of Cool and Warm White LEDs in VLC Systems
926
Frequency-based real-time magnitude estimation for earthquake early warning systems
927
Frequency-conversion properties of Nd3+ doped chlorophosphate transparent glass ceramics
928
Freundlich and Langmuir adsorption isotherms and kinetics for the removal of Tartrazine from aqueous solutions using GO/Fe2O3 Nanocomposite
929
Friction of Rubber Compounds Containing Irradiated PTFE on Smooth Surfaces
930
Friction Stir Processing (FSP) as a cladding method to produce AA2024-AA1050 multi-layer sheets
931
Friction stir processing of Nitinol (NiTi) alloy
932
Friction stir welding/processing of metals and alloys
933
Friction welded joint of CP-titanium to 304 stainless steel with Cr interlayer
934
Fritillaria raddeana:An Important and Neglected Species of Fritillaria in Northeastern Provinces of Iran
935
from binaries in logocentrism to gradience in syntactic markedness: evidence from persian
936
FROM CLASSICAL TO QUANTUM MODELS: THE REGULARISING RÔLE OF INTEGRALS, SYMMETRY AND PROBABILITIES
937
From Complexity of Biological Systems to Systems Biology and Systems Medicine
938
From Foucault to Postcolonialism: New Outlook into the Middle East
939
From Gothic Fiction to Video Games: Batman: Arkham Knight the Gothic Hero
940
From Idealism to Realism: Althusser’s Scientific Discourse in George Bernard Shaw’s Major Barbara
941
From industrial clusters to clusters of technology, contexts and prerequisites; Case study of Iran
942
FROM ITO AND STRATONOVICH TO BLACK-SCHOLES
943
From Learner-centeredness to Client-orientedness: Quality Education through Augmented Learner Satisfaction
944
From mankind-built environment to environment-built mankind
945
From mankind-built environment to environment-built mankind ( The role of environmental design of Hawraman dwelling on social interactions of inhabitants )
946
From Misfits to mHealth wearable devices: Understanding the psychology of new-product adoption
947
From mistfits to mhealth wearable devices - Understanding the Psychology of new-product adoption
948
From niche marketing to niche tourism
949
From Piety to Rebellion: The Persianate Ḥajj and the Transformation of the Riḥla Tradition
950
From Samad Behrangi’s Tunnels in Talkhoun to Chista Yasrebi’s Parallel Mirrors in The Witch and the Talisman
951
From soft set theory to a decision making problem
952
From Statistics to Machine Learning and Big Data Mining: Application Cases from Automotive Industry
953
From Theory to practical-challenges in IoTImplementation
954
FRONT FIXING METHOD FOR SOLVING INSTALLMENT OPTION
955
Frostbiting Prevention in Agricultural Plants Using Infra Red Radiant Heaters; A Novel Application
956
Fructose Enrichment Of Date Syrup Using Immobilized Glucose Isomerase Enzyme
957
Fruiting Evaluation of the First to Twelfth Buds in Tayefi Gulabi Varieties of Grapes
958
F-TRANSFORM FOR A BOUNDARY VALUE PROBLEM
959
Fuel Cell Voltage Control using neural network based on model predictive control
960
fuel cell جايگزين مناسب براي سوخت‌هاي فسيلي متانولی
961
Fuel consumption-aware powertrain selection and optimization for a B-class sedan
962
Fuel Injection Fault Detection in a Diesel Engine Based on Vibration Signature Analysis
963
Fuel reactivity as a means to control DI-HCCI combustion engine
964
Fuel type effects on radionuclide inventory
965
Fuel utilization factor challenges in theoretical and experimental approaches
966
Fuel-cell grade hydrogen production by methanol steam reforming over promoted Cu/ZnO/Al2O3 catalysts
967
Full Adder Based on Quantum Gate
968
Full Adder Design with GDI Cell and Independent Double Gate Transistor
969
Full analysis of C32H12 as a new buckybowl and a sub fullerene structure: A theoretical study
970
Full control of greenhouse crop production based on physiological knowledge
971
Full control of greenhouse crop production based on physiological knowledge
972
Full Envelope Inversion of Surface-NMR Data for Retrieval of Hydro-geophysical Characterization
973
full frequency -range wave propagation and attenuation in fluid saturated porous media
974
Full green Blend based on Poly lactic acid/ thermoplastic starch (PLA/TPS): The effect of Compatibilizer
975
FULL KINETICS AND A MECHANISTIC INVESTIGATION OF 2, 3- DIHYDRO-2-PHENYLQUINAZOLIN-4(1H)-ONE FORMATION USING FORMIC ACID BY A NOVEL TWO-COMPONENT REACTION
976
Full Modeling of a High Speed Railcar with SIMPACK and MATLAB
977
Full non-rigid group of Di-μ-oxo-bis (tetraamine manganese (II)) as a wreath product
978
Full state backstepping control of quadrotor using sliding mode observer
979
Full-Diversity-Achieving Incremental Relaying in Network-Coded Two-Way Relay Channels
980
Fullerenes with the Cayley graph structures
981
Full-field Stress Analysis of Cracked Polymer Specimens at Low Temperatures using Digital Image Correlation
982
Fully automated segmentation of maxillofacial lesions based on 3D feature descriptors and symmetry analysis
983
Fully Automatic Crack Propagation and Crack Growth Modeling in the Presence of the Soft and Hard Inclusions Using Extended Finite Element Method
984
Fully Automatic Crack Propagation and Crack Growth Modeling in the Presence of the Soft and Hard Inclusions Using Extended Finite Element Method
985
Fully automatic Z-scan setup for determining the nonlinear optical properties
986
Fully Contention-Free Optical NoC Based on Wavelenght Routing
987
Fully Fuzzified Data Envelopment Analysis Model for Performance Measurement: An Improved Method
988
FULLY k-PRIMARY MODULES
989
Function variable method for conformable fractional Zakharov-Kuzetsov equation with power law nonlinearity
990
Functional Approach to Chemical Potential
991
Functional form for the Zero - Inflated generalized Poisson regression model
992
Functional Morality by Fuzzy Logic
993
Functional Plans for Designing Residential Units in Hot and Humid Climate Based on Sustainable Architecture and Ecological Systems
994
Functional Polymers/Organo-Clay Hybrid Nanocomposites Through Acid/Amine Funtionalized Monomer and Polymer Nanofillers
995
Functional Principal Component Analysis : A Generalization of Multivariate Principal Component Analysis
996
Functional wood anatomy of Betulaceae in related to cavitation resistance and hydraulic conductivity
997
Functionality of Rotational Ambiguity in Self-Modeling Methods to Signal Contribution of Chemical Component
998
Functionalization effect of carbon support on efficiency and durability of Pt electrocatalyst toward methanol oxidation
999
Functionalization of Chitosan to Access Potential Chemotherapeutic Agents
1000
Functionalization of linseed oil-filled microcapsules with PMMA shell by using HMDA for self healing application