بر اساس عنوان

1
Evaluation of temperature and pressure of ablation plasma in an intense, pulsed, ion-beam evaporation
2
Evaluation of temperature dependence and lifetime of 79GHz power amplifier
3
Evaluation of temperature dependences of transistor characteristics in n-type, p-type, and pin-type poly-Si TFTs for temperature sensor application
4
Evaluation of temperature in corona discharges in liquid argon
5
Evaluation of Temperature Independent Spectral Indices of Emissivity in Land Surface Emissivity retrievals
6
Evaluation of Temperature Rise Caused by AC Loss Due to Plasma Disruption in Joint of JT-60SA Poloidal Field Coil
7
Evaluation of temperature sensitive amorphous metal flakes for self-regulated hyperthermia
8
Evaluation of temporal fading characteristics of a DVB-H signal for different reception categories
9
Evaluation of temporal formulas based on “checking by spheres”
10
Evaluation of temporally scalable video coding techniques
11
Evaluation of tender solutions for Aviation Training using discrete event simulation and best performance criteria
12
Evaluation of tensile and flexural properties of hemp and polypropylene based natural fiber composites
13
Evaluation of Tensile Strength of ACSR Conductors Based on Test Data for Individual Strands
14
Evaluation of tensile strength of copper-cored lead-free solder joints in air, distilled water, and NaCl solution using testing device with permanent magnets
15
Evaluation of terahertz emission from intrinsic josephson junctions using a high-Tc superconductor grain boundary Josephson junction
16
Evaluation of terminal antennas in wireless mobile communications
17
Evaluation of terminal position estimation by position fingerprinting technique using array antenna
18
Evaluation of terrain effects on mobile WiMax in a vehicular environment
19
Evaluation of terrain models for the geocoding and terrain correction, of synthetic aperture radar (SAR) images
20
Evaluation of terrain using LADAR data in urban environment for autonomous vehicles and its application in the DARPA urban challenge
21
Evaluation of TerraSAR-X Observations for Wetland InSAR Application
22
Evaluation of TerraSAR-X Observations for Wetland InSAR Application
23
Evaluation of TerraSAR-X Spotlight processing accuracy based on a new Spotlight raw data simulator
24
Evaluation of terrestrial sites for Global EOR signal detection via the RMS error metric of a sky-beam convolution polynomial fit
25
Evaluation of test algorithms stress effect on SRAMs under neutron radiation
26
Evaluation of Test Criteria for Space Application Software Modeling in Statecharts
27
Evaluation of Test Data in Determining Minimum Design Requirements for Aluminum-to-Copper Connectors [includes discussion]
28
Evaluation of test generation algorithms
29
Evaluation of test measures for LNA production testing using a multinormal statistical model
30
Evaluation of test methods and associated test structures for interconnect reliability control
31
Evaluation of test methods for longitudinal water blocked cables
32
Evaluation of test metrics: stuck-at, bridge coverage estimate and gate exhaustive
33
Evaluation of test procedures for determining servo compatibility of heads and media in magnetic disk drives
34
Evaluation of Test Reproducibility of Calibration in Reverberation Chamber
35
Evaluation of test results in Hokuto mega-solar project
36
Evaluation of test strategies for multichip modules
37
Evaluation of testability enhancement using software prototype
38
Evaluation of testability of digital circuits by fault injection technique
39
Evaluation of testing aircraft receiver in the presence of interference
40
Evaluation of testing aircraft receiver in the presence of interference
41
Evaluation of Testing Software Program Based on DEA with Fuzzy Window
42
Evaluation of tests to examine charging damage in ion implantation and plasma processes: using controlled stress environments
43
Evaluation of text classification techniques for inappropriate web content blocking
44
Evaluation of Text Clustering Based on Iterative Classification
45
Evaluation of text, numeric and graphical presentations for information retrieval interfaces: user preference and task performance measures
46
Evaluation of text-to-speech synthesizer for Indonesian language using semantically unpredictable sentences test: IndoTTS, eSpeak, and google translate TTS
47
Evaluation of textural and multipolarization radar features for crop classification
48
Evaluation of textural feature extraction schemes for neural network-based interpretation of regions in medical images
49
Evaluation of texture analysis techniques for quantitative characterization of ultrasonic liver images
50
Evaluation of Texture and Geometry for Dimensional Facial Expression Recognition
51
Evaluation of texture features based on mutual information
52
Evaluation of Texture Features for Offline Arabic Writer Identification
53
Evaluation of Texture Features in Hepatic Tissue Characterization from Non-enhanced CT Images
54
Evaluation of texture methods for image analysis
55
Evaluation of texture segmentation algorithms
56
Evaluation of TFET and FinFET devices and 32-Bit CLA circuits considering work function variation and line-edge roughness
57
Evaluation of TH UWB capacity in the presence of synchronization errors
58
Evaluation of Thallium Contamination from an Open-Mined Yunfu Thallium-Bearing Pyrite Deposit, China
59
Evaluation of THD and switching loss for a new single-phase 7-level inverter
60
Evaluation of the “Hill Climbing” and the “Incremental Conductance” Maximum Power Point Trackers for Photovoltaic Power Systems
61
Evaluation of the `HiVol´ above-wafer in-situ particle monitoring sensor
62
Evaluation of the `TRIM´ ECG data compressor
63
Evaluation of the ´replace constructors with creation methods´ refactoring in Java systems
64
Evaluation of the 1980 L´Aquila workshop on digital signal processing
65
Evaluation of the 1993 Omega propagation correction model
66
Evaluation of the 1998 forest fires in East-Kalimantan (Indonesia) using NOAA-AVHRR hotspot data and multitemporal ERS-2 SAR images
67
Evaluation of the 3D IMF-OSEM algorithm by using data from a high resolution PET scanner
68
Evaluation of the 3D time reversal method for hyperthermia treatment planning in head and neck tumors
69
Evaluation of the 3D visualization of quantitative stereoelectroencephalographic information
70
Evaluation of the 800 nm pump band for erbium-doped fiber amplifiers
71
Evaluation of the ability of nonlinear noise reduction filter to the low-contrast object in Multi-Detector Row Computed Tomography using a digital phantom and power spectrum
72
Evaluation of the ability of petri net centralized implementation techniques
73
Evaluation of the absorption spectrum in quantum dots for efficient solar cells
74
Evaluation of the AC quantized Hall resistance
75
Evaluation of the AC quantized Hall resistance
76
Evaluation of the accelerated life testing conditions for PV-modules based on measured and simulated weathering stress
77
Evaluation of the accuracy and robustness of a motion correction algorithm for PET using a novel phantom approach
78
Evaluation of the Accuracy and Robustness of a Motion Correction Algorithm for PET Using a Novel Phantom Approach
79
Evaluation of the accuracy of in-plane velocity measurements with segmented k-space magnetic resonance phase velocity mapping
80
Evaluation of the accuracy of the method for measuring state-of-the-art ultra-high stability quartz crystal oscillators
81
Evaluation of the accuracy of three-dimensional reconstruction of edentulous model jaw relation based on dental articulator positioning
82
Evaluation of the acoustic decoder of the `KEAL´ speech recognition system
83
Evaluation of the acoustical properties of adhesive-free dual layer piezoelectric PVDF copolymer transducer
84
Evaluation of the ACR-NEMA standard for communications in digital radiology
85
Evaluation of the adaptation techniques in Kernel Tool Kit (KTK)
86
Evaluation of the Adaptive Beamforming Capability of an ESPAR Antenna Using the Genetic Algorithm
87
Evaluation of the adaptive speckle suppression filter for coronary optical coherence tomography imaging
88
Evaluation of the additional loss due to supply voltage distortion in relation to induction motor efficiency rating
89
Evaluation of the Additive Interference Model for RFID Reader Collision Problem
90
Evaluation of the adhesion strength using digital microscope and international standards
91
Evaluation of the adoption of an information systems security policy
92
Evaluation of the adsorption potentialities of humate substances in sandy soils and aqueous phase
93
Evaluation of the advice generator of an intelligent learning environment
94
Evaluation of the aerosol scattering phase function from PGAMS observation of sky path radiance
95
Evaluation of the affective valence of speech using pitch substructure
96
Evaluation of the AGH-designed time and frequency transfer system on a 149 km PTB-hanover-PTB fiber link
97
Evaluation of the agilent 3458A time jitter performance
98
Evaluation of the Aging Process of Dye-Sensitized Solar Cells Under Different Stress Conditions
99
Evaluation of the agrarian capability of red hilly area of south China based on GIS
100
Evaluation of the Aid Provided by an Exoskeleton in the Reduction of the Joint Torques Exerted by Human Lower Limbs: A Simulation Study
101
Evaluation of the air pollution purification ability of plant by a bioelectrical potential measurement
102
Evaluation of the Algorithms for Selecting an Energy-efficient Storage Server in Storage and Computation Oriented Applications
103
Evaluation of the algorithms of face identification
104
Evaluation of the altimetric information from RADARSAT-1, ASTER and SRTM data for topographic mapping in the Amazon Region
105
Evaluation of the Amazon Rain Forrest as a Distributed Target for Satellite Microwave Radiometer Calibration
106
Evaluation of the ambiguity caused by the absence of diacritical marks in Arabic texts: Statistical study
107
Evaluation of the ambiguity function for passive radar with OFDM transmissions
108
Evaluation of the Amplitude Distribution of Quasi-Gaussian Signals Obtained From Pseudorandom Noise
109
Evaluation of the amplitudes of high-order fault related components in double bar faults
110
Evaluation of the analog-digital system in dynamic conditions
111
Evaluation of the analogue phase diversity antenna for ISDB using the fading emulator
112
Evaluation of the analytic representation of long-record ECG and its HRV signals for congestive heart failure classification
113
Evaluation of the android-based fall detection system with physiological data monitoring
114
Evaluation of the angle of arrival based techniques
115
Evaluation of the anisotropy constant using transverse biased initial susceptibility method
116
Evaluation of the anisotropy field for fine-particle systems from low-field thermomagnetic curves
117
Evaluation of the anonymous I2P network´s design choices against performance and security
118
Evaluation of the antagonistic tendon driven system for SNU Exo-Glove
119
Evaluation of the antennas performance for three-element MIMO access points in a two-storey house
120
Evaluation of the anti-interception method for MIMO radar
121
Evaluation of the Aperture in the Curvilinear SAR
122
Evaluation of the applicability of FRA for inter-turn fault detection in stator windings
123
Evaluation of the applicability of MEMS microphone for auscultation
124
Evaluation of the Applicability of Phenomenological HTS Models for Numerical Analysis of Quenches in Coated Conductors: Simulations vs. Experiments
125
Evaluation of the applicability of the network flow approach to the emergency service restoration problem
126
Evaluation of the APS protocol for SDH rings reconfiguration
127
Evaluation of the area of intensive coagulation of dispersed-phase particles in emulsion and suspension due to high-intensive ultrasonic treatment
128
Evaluation of the ASAR GM soil moisture product
129
Evaluation of the ASCAT surface soil moisture product for agricultural drought monitoring in USA
130
Evaluation of the asphalt pavement at low temperature using asphalt thermal stress program
131
Evaluation of the assessment component of a system for shaping vocal behavior in severely speech-disabled individuals
132
Evaluation of the Asymmetry in Photoelectron Distribution Around the GEOTAIL Spacecraft
133
Evaluation of the ATLAS-MPX devices for neutron field spectral composition measurement in the ATLAS experiment
134
Evaluation of the atmospheric aerosol particle size in the reflective layer produced by strong solar flares
135
Evaluation of the atmospheric precipitable water at local scale during extreme weather using ground-based CGPS measurements
136
Evaluation of the attenuation in L-band due to the foliage in function of the elevation angle
137
Evaluation of the attenuation provided by a radar absorbing material (RAM) coating on an HF wire rope antenna
138
Evaluation of the attractiveness of tourism destinations based on link analysis
139
Evaluation of the Audio Bracelet for Blind Interaction for improving mobility and spatial cognition in early blind children - A pilot study
140
Evaluation of the Authentication Service on the Access Management for Heterogeneous Mobile Communication Networks
141
Evaluation of the Auto-Associative Neural Network Based Sensor Compensation in Drive Systems
142
Evaluation of the automatic multilinguality for time expression resolution
143
Evaluation of the Automatic Neighbor Relation Function in a Dense Urban Scenario
144
Evaluation of the autonomic nervous system for fall detection
145
Evaluation of the available scripting languages for home automation networks: Real world case study
146
Evaluation of the Average Access Time for a Digital Cassette Memory System
147
Evaluation of the Average Packet Delivery Delay in Highly-Disrupted Networks: The DTN and IP-like Protocol Cases
148
Evaluation of the back-end design overhead for ASIC implementations of large-operand multipliers targeting resource-constrained environments
149
Evaluation of the backoff procedure of Homeplug MAC vs. DCF
150
Evaluation of the batteries and charge controllers in small stand-alone photovoltaic systems
151
Evaluation of the beam wondering in free space optics by image analysis
152
Evaluation of the bearing voltage and the overshoot phase voltage in PWM inverter-fed by means of a multiconductor transmission line model
153
Evaluation of the beat-to-beat detection accuracy of PulseOn wearable optical heart rate monitor
154
Evaluation of the behavior of switch mode power supply and voltage stabilizer under voltage variations of short duration
155
Evaluation of the benefits of a fully re-programmable two way prepayment system
156
Evaluation of the benefits of using dual-source energy storage in hybrid electric vehicles
157
Evaluation of the BICGSTAB(l) algorithm for the finite-element/boundary-integral method
158
Evaluation of the binding force between a biotinylated microbubble and a streptavidin-coated surface by ultrasound radiation
159
Evaluation of the Birmingham Box Managed Motorways Phases 1 and 2
160
Evaluation of the Bistatic Range migration processor
161
Evaluation of the Block Error Probability of Block Modulation Codes by the Maximum-Likelihood Decoding for an Awgn Channel
162
Evaluation of the blocking probability and the throughput in the uplink of wireless cellular networks
163
Evaluation of the blocking probability in a cellular environment with hard capacity: a statistical approach
164
Evaluation of the blood and genetic compatibility of coronary artery stents
165
Evaluation of the Bluetooth link and antennas performance for indoor office environments by measurement trials and FEMLAB simulations
166
Evaluation of the blur extent from motion blurred SAR images
167
Evaluation of the blur parameters from motion blurred images
168
Evaluation of the bonded silicon on insulator (SOI) wafer and the characteristics of PIN photodiodes on the bonded SOI wafer
169
Evaluation of the boron activation and depth distribution using BBr2+ implants
170
Evaluation of the brain wave as biometrics in a simulated driving environment
171
Evaluation of the Bremen SSVEP based BCI in real world conditions
172
Evaluation of the Broadcast Operation in Kademlia
173
Evaluation of the broken bar fault detectability depending on the rotor bar number
174
Evaluation of the BRuIT protocol
175
Evaluation of the BSIM6 compact MOSFET model´s scalability in 40nm CMOS technology
176
Evaluation of the BSIM6 compact MOSFET model´s scalability in 40nm CMOS technology
177
Evaluation of the Budget Extension of a GPON by EDFA Amplification
178
Evaluation of the bulk water dynamics inside HeLa cells using terahertz time-domain attenuated total reflection spectroscopy
179
Evaluation of the business operation performance of the listing companies by applying TOPSIS method
180
Evaluation of the C-70045A High-Speed Photomultiplier
181
Evaluation of the cable model for electrical stimulation of unmyelinated nerve fibers
182
Evaluation of the Cable Modem Technology DOCSIS 1.0 in an MMDS Access Network for Video Conference Services
183
Evaluation of the calculable high frequency ac/dc standard
184
Evaluation of the calculable high frequency AC-DC standard
185
Evaluation of the calculated PDD of a 3D electron beam algorithm in a radiotherapy planning system
186
Evaluation of the calculation method for stray losses in structural parts of HVDC converter transformers
187
Evaluation of the calibration method using iterative spline interpolation for array shape estimation
188
Evaluation of the CAP Properties on Amazon SimpleDB and Windows Azure Table Storage
189
Evaluation of the Capabilities of Confidence Measures for Assessing Optical Flow Quality
190
Evaluation of the capability of multilayer perceptron using total curvature of hypersurface: in the output-space
191
Evaluation of the capacity credit of RES: The Greek case
192
Evaluation of the capacity of constrained codes with multiple constrained signalling dimensions
193
Evaluation of the Capacity of Multiple-Access MIMO Schemes with Feedback in a Small Outdoor Cell
194
Evaluation of the Casner-Jacobson algorithm for compressing the RTP/UDP/IP headers
195
Evaluation of the catalytic metal for the hydrogen sensor using terahertz chemical microscope
196
Evaluation of the cause of overload failure in rotating equipment
197
Evaluation of the Causes of Low-Voltage Consumer Accidents in Israel
198
Evaluation of the cell-penetrating peptide TAT as a trans-blood-brain barrier delivery vehicle
199
Evaluation of the CFA Test Programs Via Formal Computer Descriptions
200
Evaluation of the change of the residual stress in nano-scale transistors during the deposition and fine patterning processes of thin films
201
Evaluation of the Channel Properties for a DRM+ System and Field Tests in the VHF-Band III (174-230 Mhz)
202
Evaluation of the Channel State Information Effect to MIMO-OFDM System Performance
203
Evaluation of the characteristic impedance of microstrip interconnect lines on printed-circuit-boards
204
Evaluation of the charging effects of electric vehicles on power systems, taking into account optimal charging scenarios
205
Evaluation of the Chengdu City Road Traffic Safety Based on Means of Weighted Average and AHP
206
Evaluation of the chirp parameter of a Mach-Zehnder intensity modulator
207
Evaluation of the CIGS precursor layer deposited by CuGa-NaF sputtering target and its effect for Na distribution
208
Evaluation of the circular metal plate as a UHF coupler for partial discharge monitoring
209
Evaluation of the City Emergency Risk Based on IAHP-Entropy Integrated Method
210
Evaluation of the clinical guidelines for the management of angina pectoris with traditional Chinese medicine in multi-level hospitals
211
Evaluation of the clock laser for an Yb lattice clock using an optic fiber comb
212
Evaluation of the Cluster Structure on the PIM/C Parallel Inference Machine
213
Evaluation of the clustering of video frames using Rank and Histogram methods with Euclidean and City Block distance measurement for different levels of threshold
214
Evaluation of the coal industrial safety: Based on the data envelopment analysis
215
Evaluation of the Coalbed Methane Potential by a GIS-Based Fuzzy AHP Model
216
Evaluation of the co-channel interference effects on the performance of coded networks
217
Evaluation of the co-doped LSO:Ce,Ca scintillator crystal in the X-ray energy range from 50 to 140kVp for medical imaging applications
218
Evaluation of the coefficients of the fourier series representing a voltage waveform obtained by full rectification of an integral number of sinusoidal cycles followed by an ´off period´ an integral number of cycles in length
219
Evaluation of the Cognitive Effects of Travel Technique in Complex Real and Virtual Environments
220
Evaluation of the Cognitive Process during Mental Imaging of Two- or Three-Dimensional Figures
221
Evaluation of the coherence of electron beam from low temperature field emitter
222
Evaluation of the cold extrusion production process
223
Evaluation of the cold pipe precharger
224
Evaluation of the cold pipe precharger
225
Evaluation of the Collaborative Wheelchair Assistant System
226
Evaluation of the combined concentric-ring sector-vortex phased array for MR-guided ultrasound surgery
227
Evaluation of the combined impacts of E-ZPass and time-of-day pricing on port authority of New York and New Jersey crossings
228
Evaluation of the Command and Control Cube
229
Evaluation of the Commercial Bank Risk Comprehensive Based on Entropy
230
Evaluation of the communication latency over real-time channel in HARTS
231
Evaluation of the communications performance achievable on base station to handheld-terminal radio links with several different practical receive antenna arrays
232
Evaluation of the Competition Policy to Encourage MVNO System in Japan
233
Evaluation of the complex form in fresnel region for UWB free space transmission model
234
Evaluation of the component tolerances for the ILC Main Linac assuming global linear corrections
235
Evaluation of the Comprehension of Noncontinous Sped-Up Vocoded Speech: A Strategy for Coping with Fading HF Channels
236
Evaluation of the comprehensive strength of the listed companies in China´s cultural media industry
237
Evaluation of the compromising radiation by electromagnetic compatibility tests
238
Evaluation of the Computational Efficiency of a Wavelet-Transformed FDTD Scheme
239
Evaluation of the computer simulation using particles method for use in electromagnetics
240
Evaluation of the Concatenation of LDPC and RS Codes in Magnetic Recording Channel Using Field Programmable Gate Arrays
241
Evaluation of the Concatenative Turkish Text-to-Speech System
242
Evaluation of the Concentration of Deep Levels in Semi-Insulating CdTe by Photoconductivity and TEES
243
Evaluation of the condition of medium voltage urban cable networks using fuzzy logic
244
Evaluation of the configuration space of robots upon a distributed computing system
245
Evaluation of the consistency of long-term NDVI time series derived from AVHRR,SPOT-vegetation, SeaWiFS, MODIS, and Landsat ETM+ sensors
246
Evaluation of the construction of novel views by a combination of basis views
247
Evaluation of the content delivery performance of tourism e-business website in China: A case study from top 20 websites
248
Evaluation of the contribution of adsorption to the removal of LDL-Cholesterol by cascade filtration
249
Evaluation of the Control Limit of Rotor-Side Converters in DFIG-Based Wind Energy Conversion Systems under Symmetrical Voltage Dips
250
Evaluation of the Conventional vs. Ancient Computation Methodology for Energy Efficient Arithmetic Architecture
251
Evaluation of the converter topologies suited for integrated motor drives
252
Evaluation of the cooray-rubinstein formula for distances farther than a few kilometers using the parallel FDTD method
253
Evaluation of the correlation between blood pressure and pulse transit time
254
Evaluation of the correlation between cardiac and sympathetic baroreflex sensitivity before orthostatic syncope
255
Evaluation of the corrosion performance of Cu-Al intermetallic compounds and the effect of Pd addition
256
Evaluation of the Cost of Losses for Underground Transmission Cable Systems
257
Evaluation of the Cost of Losses for Underground Transmission Cable Systems
258
Evaluation of the costs and benefits of Microgrids with consideration of services beyond energy supply
259
Evaluation of the coupling mechanisms of electromagnetic disturbances resulting from disconnector switching in substations: experimental design and initial results
260
Evaluation of the covertness of time-hopping impulse radio using a multi-radiometer detection
261
Evaluation of the CPT pseudo-resonance scheme for all-optical 87Rb frequency standard
262
Evaluation of the creep of the Sn62Pb36Ag2 solder alloy by the measurement of the stresses in a silicon die
263
Evaluation of the CRIB as an Indicator of the Performance of Neonatal Intensive Care Units Using the Software ROCNPA
264
Evaluation of the Critical Current Density of Multifilamentary ${\rm Nb}_{3}{\rm Sn}$ Wires From Magnetization Measurements
265
Evaluation of the critical load of parallel interference cancellation based on the PDA approach
266
Evaluation of the cross-polarization modulation impact on the SOA behavior: Using to perform all-optical signal processing
267
Evaluation of the crosstalk and losses in a multi-transducer acousto-optic switch
268
Evaluation of the crystallinity of grain boundaries of electronic copper thin films for highly reliable interconnections
269
Evaluation of the crystallographic quality of electroplated copper thin-film interconnections embedded in TSV structures
270
Evaluation of the Cs atomic fountain frequency standard at NMIJ/AIST
271
Evaluation of the current distribution from implantable defibrillation electrodes using image analysis of bubble formation in a homogeneous tank
272
Evaluation of the current in the rail by 2D a Methods: Infuence of the railway platform
273
Evaluation of the current sharing temperature of the ITER Toroidal Field Model Coil
274
Evaluation of the Current Situation and Planning of the Greenspace System in Huaibei City Using GIS Based Network Analysis
275
Evaluation of the current state in teaching informatics at upper secondary level of education (ISCED3A) in the Slovak Republic: Conceptual and methodical starting points
276
Evaluation of the Current-Limiting Properties for a Superconducting Current-Limiting Element With the Winding Direction of the Reactor of the Second Coil
277
Evaluation of the customer interruption cost taking into consideration macro economic approach in Korea
278
Evaluation of the customer value of component redundancy in electrical distribution systems
279
Evaluation of the cytotoxic effect of PLGA coated iron oxide nanoparticles as 5-fluorouracil carrier on DU 145 human prostate carcinoma cell line
280
Evaluation of the Cytotoxic Effects of PLGA Coated Iron Oxide Nanoparticles as a Carrier of 5- Fluorouracil and Mega-Voltage X-Ray Radiation in DU145 Prostate Cancer Cell Line
281
Evaluation of the damage detection capability of a sparse-array guided-wave SHM system applied to a complex structure under varying thermal conditions
282
Evaluation of the data obtained by satellite-borne microwave sensor for snowpack observation
283
Evaluation of the DC parameters and noise transport in the gun region of an injected-beam crossed-field diode
284
Evaluation of the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave Imager Sounder (SSMIS)
285
Evaluation of the degeneracy of hole´s quantum levels in the InGaAS/InP quantum well structures by using photoluminescence spectra
286
Evaluation of the degradation of floating-gate memories with Al2O3 tunnel oxide
287
Evaluation of the Degradation of Generator Stator Ground Wall Insulation Under Multistresses Aging
288
Evaluation of the degree of coordinated development of population, resource, environment and economy in contiguous areas of Sichuan, Yunnan and Guizhou, China
289
Evaluation of the Delamination in a Flip Chip Using Anisotropic Conductive Adhesive Films Under Moisture/Reflow Sensitivity Test
290
Evaluation of the delivered temperature of prewarmed irrigation saline
291
Evaluation of the dependence on system parameters of non-linear interference accumulation in multi-span links
292
Evaluation of the depth of interaction (DOI) for the High Resolution Research Tomograph (HRRT) - a comparison between scanners with and without DOI
293
Evaluation of the descriptive type answers using hyperspace analog to language and self-organizing map
294
Evaluation of the design requirements for the electrical part of transmission-type optical smoke detector to improve its threshold stability to slowly varying influences
295
Evaluation of the Design Requirements of the H-1 Upgrades Blade Fold Racks
296
Evaluation of the detectability of broken rotor bars for double squirrel cage rotor induction motors
297
Evaluation of the detection characteristics of road sensors under poor-visibility conditions
298
Evaluation of the detection limit at low activity levels for three preclinical PET systems
299
Evaluation of the determinants of cascade-connected Coates and Mason graphs
300
Evaluation of the di.me trust metric in CRM settings
301
Evaluation of the Dielectric and Short-Circuit Capabilities of Naturally Aged Power Transformers
302
Evaluation of the Dielectric and Short-Circuit Capabilities of Naturally Aged Power Transformers
303
Evaluation of the dielectric cure monitoring of epoxy molding compound in transfer molding process for electronic packages
304
Evaluation of the diffraction losses for a single-element diode laser transmitter in a free-space optical link
305
Evaluation of the diffusion length in polycrystalline silicon by surface photovoltage technique
306
Evaluation of the diffusion-like accelerated demons algorithm
307
Evaluation of the Digital Prediction Filter Applied to Control a Class of Servomotor by Microcomputers
308
Evaluation of the dimensioning and economical benefits of intelligent optical networks
309
Evaluation of the directivity of antenna arrays using an iterative method
310
Evaluation of the Discharges on Wind Turbines for Lightning Protection
311
Evaluation of the discrimination power of features extracted from 2-D and 3-D facial images for facial expression analysis
312
Evaluation of the distance spectrum of variable-length finite-state codes
313
Evaluation of the Distributed Case-Based Reasoning System on a Distributed Computing Platform
314
Evaluation of the distributed generators frequency protection due to changes in the anti-islanding requirements
315
Evaluation of the distributed MISO gain for mobile broadcast planning in real scenarios
316
Evaluation of the disturbing potential of IEMI using mathematical norms and analytical calculations
317
Evaluation of the dominant mode rejection beamformer using reduced integration times
318
Evaluation of the driving performance of a surface acoustic wave linear motor
319
Evaluation of the drop test of isotropic electrically conductive adhesives (ICAs) using an accelerometer
320
Evaluation of the DS-UWB system performance using innovative spreading codes
321
Evaluation of the durability of flexible barrier materials
322
Evaluation of the Dutch train timetable information system developed in the ARISE project
323
Evaluation of the dynamic characteristics of electromagnetic actuators by using virtual devices from National Instruments
324
Evaluation of the dynamic interactions between aircraft gas turbine engine and electrical system
325
Evaluation of the dynamic mechanical behavior of polymer gel dosimeter
326
Evaluation of the Dynamic Model of Fluidic Muscles using Quick-Release
327
Evaluation of the dynamic network and protection security of power systems - overview
328
Evaluation of the dynamic performance characteristic of electrical energy meters
329
Evaluation of the dynamic properties of a Voice Coil Motor (VCM)
330
Evaluation of the dynamic response of catheter-manometer systems
331
Evaluation Of The Dynamics Of The Macular Recovery In Diabetic Subjects Through Single-sweep Vep´s Analysis
332
Evaluation of the ECAT EXACT HR+ 3-D PET scanner in H/sub 2//sup 15/O brain activation studies: dose fractionation strategies for rCBF and signal enhancing protocols
333
Evaluation of the ECAT EXACT HR+ 3D PET scanner in 15O-water brain activation studies
334
Evaluation of the ECAT EXCAT HR with ACSII for clinical routine 3D measurements
335
Evaluation of the economic impact of public service´s spatial uneven development in metropolitan region
336
Evaluation of the Economic Impact of the Mega-Event Based on AHP
337
Evaluation of the educational potentials - interactive technologies applied to Cultural Heritage
338
Evaluation of the effect of a planar reflector on the pulse performance of an UWB monopole
339
Evaluation of the effect of anode groove pitch to ion beam focusibility on spherical plasma focus diode
340
Evaluation of the Effect of Area Factors on the Grain Connectivity of Ex-Situ {\\rm MgB}_{2} Cores
341
Evaluation of the effect of arterial input function on cerebral blood flow in MR perfusion imaging
342
Evaluation of the effect of cavitation activity on drug-ultrasound synergisms
343
Evaluation of the effect of cosmetic therapy by EEG
344
Evaluation of the effect of filter apodization for volume PET imaging using the 3-D RP algorithm
345
Evaluation of the Effect of Functional Similarities on Development Effort
346
Evaluation of the effect of ion mobility in plasma erosion opening switch
347
Evaluation of the Effect of Magnetic Field on PET Spatial Resolution and Contrast Recovery Using Clinical PET Scanners and EGSnrc Simulations
348
Evaluation of the effect of magnetic field on the PET spatial resolution and contrast recovery using clinical PET scanners and EGS simulations
349
Evaluation of the effect of mechanical operations on seismic qualification test of SF6 circuit breakers
350
Evaluation of the effect of modal interaction higher than 2nd order in small-signal analysis
351
Evaluation of the effect of postural and gravitational variations on the distribution of pulmonary blood flow via an image-based computational model
352
Evaluation of the Effect of Power Circuit Breaker Reclosing Practices on Turbine-Generators Shafts
353
Evaluation of the effect of preload force on resonance frequencies for a traveling wave ultrasonic motor
354
Evaluation of the effect of pressurized bushings on seismic qualification of SF6 circuit breakers
355
Evaluation of the effect of reconstructed image pixel size on defect detectability in Tl-201 fan-beam SPECT by an observer performance study
356
Evaluation of the effect of reconstructed image pixel size on defect detectability in Tl-201 fan-beam SPECT by an observer performance study
357
Evaluation of the effect of salt water and a counterpoise on the voltage profile of a HV power transmission line grounding system in a two layer with high resistivity soil
358
Evaluation of the effect of scatter correction on lesion detection in hepatic SPECT imaging
359
Evaluation of the effect of scatter correction on lesion detection in hepatic SPECT imaging
360
Evaluation of the effect of self-phase modulation in transmission systems with CPFSK
361
Evaluation of the effect of soil moisture and wind speed on dust emission using aeronet, seviri, soil moisture and wind speed data
362
Evaluation of the effect of spray flow rate and the nozzle velocity on the deposition of droplets
363
Evaluation of the effect of stress on formants in Farsi vowels
364
Evaluation of the effect of stress relief slots on QFN strip warpage using finite element analysis
365
Evaluation of the Effect of the Orbit Boost of the TRMM Satellite on the PR Rain Estimates
366
Evaluation of the effect of the SMOS/AMSRE soil moisture estimates on dust emission over MENA region
367
Evaluation of the effect of the thermal cycling temperature on the conduction current in alumina substrates
368
Evaluation of the effect of the thermal cycling temperature on the losses in alumina substrates
369
Evaluation of the effect of vertical faults on the voltage distribution around HVDC electrodes using a supercomputer
370
Evaluation of the Effect of Visual Stimulation on Humans by Simultaneous Experiment with Multiple Subjects
371
Evaluation of the effect of visually-induced motion sickness based on pulse transmission time and heart rate
372
Evaluation of the effect of walking speeds on Human Gait Recognition
373
Evaluation of the effect of X-ray detectable defects on electrical performance of semiconductors
374
Evaluation of the effect on walking of balance-related degrees of freedom in a robotic gait training device
375
Evaluation of the effective image blurring factors in the synchrotron proximity X-ray lithography simulation
376
Evaluation of the effective protection distance of low-voltage SPD to equipment
377
Evaluation of the Effective Usage of Web Site Using Interactions of Users for Refinement
378
Evaluation of the Effectiveness in Applying Cognitive Approach towards Selecting Multimedia Elements
379
Evaluation of the Effectiveness of a Web-Based Learning Design for Adult Computer Science Courses
380
Evaluation of the effectiveness of auditory speeding warnings for commercial passenger vehicles –a field study in Wuhan, China
381
Evaluation of the Effectiveness of EMG Parameters in the Study of Neurogenic Diseases-A Statistical Approach Using Clinical and Simulated Data
382
Evaluation of the Effectiveness of E-Training: A Case Study on In-Service Teachers´ Training
383
Evaluation of the effectiveness of group screening methods as compared to no group screening
384
Evaluation of the effectiveness of head tracking for view and avatar control in virtual environments
385
Evaluation of the effectiveness of muscle assistive device using muscle fatigue analysis
386
Evaluation of the effectiveness of passive and dynamic filters for nonactive power in a large industrial plant
387
Evaluation of the Effectiveness of Prolog for a CAD Application
388
Evaluation of the effectiveness of radar detection method for mine-like objects using seismic shocks
389
Evaluation of the Effectiveness of Shielding and Filtering of HVDC Converter Stations
390
Evaluation of the effectiveness of shielding and filtering of HVDC converter stations
391
Evaluation of the Effectiveness of Tap-Water Filter Using in-Air PIXE
392
Evaluation of the effectiveness of the LOCUST Therapeutic Community
393
Evaluation of the effectiveness of voltage stability indices on different loadings
394
Evaluation of the effects and impacts of the CdSTe interlayer in CdS/CdTe solar cells through modeling and simulations
395
Evaluation of the effects of a grouping algorithm on IEEE 802.15.4 networks with hidden nodes
396
Evaluation of the Effects of a Personal Mobility Vehicle on Multiple Pedestrians Using Personal Space
397
Evaluation of the effects of clinical diagnostic ultrasound in combination with ultrasound contrast agents on cell stress: Single cell analysis of intracellular phospho-signaling pathways in blood cancer cells and normal blood leukocytes
398
Evaluation of the effects of co-channel interference on the bit error rate of wireless networks with error correcting codes in fading channels
399
Evaluation of the Effects of Co-Channel Interference on the Bit Error Rate of Wireless Networks with Error Correcting Codes in Fading Channels
400
Evaluation of the effects of e-CRM on customer loyalty (case study: Esfahan Branch´s of Sepah Bank)
401
Evaluation of the effects of frame time variation on VR task performance
402
Evaluation of the effects of patient arm attenuation in cardiac perfusion imaging
403
Evaluation of the effects of patient arm attenuation in SPECT cardiac perfusion imaging
404
Evaluation of the effects of photovoltaic inverter controllers on grid injected power with local dynamic loads
405
Evaluation of the effects of pilots on the envelope fluctuations reduction based on neural fuzzy systems
406
Evaluation of the effects of protocol processing overhead in error recovery schemes for a high-speed packet switched network: link-by-link versus edge-to-edge schemes
407
Evaluation of the effects of rotor harmonics in a doubly-fed induction generator with harmonic induced speed ripple
408
Evaluation of the effects of speech enhancement algorithms on the detection of fundamental frequency of speech
409
Evaluation of the Effects of Surface Roughness on the Relationship Between Soil BRF Data and Broadband Albedo
410
Evaluation of the effects of the layout design on the quality of surface mount boards
411
Evaluation of the effects of the shape of the artificial hand on the quality of the interaction - Natural appearance vs. symbolic appearance
412
Evaluation of the effects of the voltage harmonics on the extra iron losses in the inverter fed electromagnetic devices
413
Evaluation of the effects of titanium induced CT artifacts on biomechanical models generation
414
Evaluation of the effects of user antenna pointing error in multiple high-altitude platform systems
415
Evaluation of the Effects of User-Sensitivity on Text Summarization
416
Evaluation of the Effects of Variable Message Signs at Urban Traffic Network
417
Evaluation of the efficiency of a newly developed permanent implantable mechanical cardiac assist device
418
Evaluation of the Efficiency of Line-Start Permanent-Magnet Machines as a Function of the Operating Temperature
419
Evaluation of the Efficiency of Object-Based Classification in the Identification of Geological Structures Case Study: Extraction of the Morphology of the Normal Faults
420
Evaluation of the Efficiency of the Supermarket Chain Based on the DEA Method
421
Evaluation of the EKF-Based Estimation Architectures for Data Fusion in Mobile Robots
422
Evaluation of the electric and magnetic field levels of around the medium voltage power lines in related to public health
423
Evaluation of the electrical cell-substrate impedance sensing system (ECIS) method using a mathematical model
424
Evaluation of the electrical characteristics of III-V compounds solar cells irradiated with protons at low temperature
425
Evaluation of the electrical properties of epoxy-based nanocomposites for motor insulation
426
Evaluation of the electric-field transfer functions between IEMI sources and banking IT equipment
427
Evaluation of the electrode-amplifier noise in high resolution biological signal acquisition
428
Evaluation of the electromagnetic absorption in furniture for the integration of UHF-RFID tags
429
Evaluation of the electromagnetic consequences of a plasma disruption on the magnetic fusion device in-vessel system
430
Evaluation of the Electromagnetic Environment Around Underground HVDC Lines
431
Evaluation of the electromagnetic field radiated by shortwave and microwave diathermy equipment
432
Evaluation of the electromagnetic fields exposure produced by WiMAX signals
433
Evaluation of the electromagnetic hazard of intense THz pulses on neural cells
434
Evaluation of the Electromobility Potential Index and results for 46 major cities
435
Evaluation of the Electro-Optic Response of Novel Calcium Barium Niobate Thin Films
436
Evaluation of the EMD end effect and a window based method to improve EMD
437
Evaluation of the EMP shielding effectiveness for the thin metallic shells
438
Evaluation of the endfire response of a superdirective line array in simulated ambient noise environments
439
Evaluation of the energetic and operational efficiency in active power filters using fuzzy logic control for microgrid applications
440
Evaluation of the energy consumption per bit in BENES optical packet switch
441
Evaluation of the energy loss in superconductors used in the superconducting magnetic levitation experiment
442
Evaluation of the energy loss of intense pulsed ion beam in thin foil targets
443
Evaluation of the Energy Performance of Dense Linear Algebra Kernels on Multi-core and Many-Core Processors
444
Evaluation of the energy policy for Lebanon
445
Evaluation of the energy yield prediction error depending on the methodology to estimate global tilted irradiance from measured global horizontal irradiance
446
Evaluation of the energy-saving performance of the PMSM drive system
447
Evaluation of the Engineering Aspects of Whirlwind I
448
Evaluation of the English-Hindi Cross Language Information Retrieval System Based on Dictionary Based Query Translation Method
449
Evaluation of the entrainment between a speaker´s burst-pause of speech and respiration and a listener´s respiration in face-to-face communication
450
Evaluation of the environmental aspects to operate off-grid, stand-alone telecommunication systems
451
Evaluation of the environmental impact of wind generation penetration
452
Evaluation of the environmental protection of photo BCB polymers (CycloteneTM 4000)
453
Evaluation of the environmental sustainability of the use of straw for electricity production
454
Evaluation of the Equivalent Circuit Parameters of Microstrip Discontiuuities through Perturbation of a Resonant Ring (Short Papers)
455
Evaluation of the error induced by an incorrect positioning of the handset against the SAM phantom for SAR calculations
456
Evaluation of the ESPRIT approach in polarimetric interferometric SAR
457
Evaluation of the Evolutionary Ability of Business Incubation Network Based on Genetic Algorithm
458
Evaluation of the exact union bound for trellis-coded modulations over fading channels
459
Evaluation of the Executing Effectiveness of Strategic Activity Based on Task and Management Control Matching
460
Evaluation of the exertion and motivation factors of a virtual reality exercise game for children with autism
461
Evaluation of the expansion of Joint IP Modem to support DVB-RCS2 (April 2012)
462
Evaluation of the explosive hazard of gases generated by transformer potting materials when subjected to electrical overloads
463
Evaluation of the extended Holter capabilities of the Prometheus implantable research pacemaker
464
Evaluation of the Extended Improved Redundant Power Consumption Laxity-Based (EIRPCLB) Algorithm
465
Evaluation of the extraction method of mobility in InGaAs n-MOSFETs
466
Evaluation of the Extreme Learning Machine for automatic fault diagnosis of the Tennessee Eastman chemical process
467
Evaluation of the Extremely Low Block Error Rate of Irregular LDPC Codes
468
Evaluation of the FAA´s security equipment integration program
469
Evaluation of the factors determining HBT high-frequency performance by direct analysis of S-parameter data
470
Evaluation of the failure modes in a reduced parts converter for switched reluctance drives
471
Evaluation of the failure probability for gapless metal oxide arresters
472
Evaluation of the failure rates of transmission lines during hurricanes using a neuro-fuzzy system
473
Evaluation of the fast impedance spectroscopy method in the laboratory measurement system
474
Evaluation of the Fatigue in Human Arms via Electromyography Signals
475
Evaluation of the feasibility of a novel distance adaptable steady-state visual evoked potential based brain-computer interface
476
Evaluation of the Feasibility of Making Large-Scale X-Ray Tomography Reconstructions on Clouds
477
Evaluation of the feedforward neural network covariance matrix error
478
Evaluation of the field coupling to a line of finite length - a comparison between the dual integral equation approach and the moment method
479
Evaluation of the Field on a Uniform Array of Knife Edges Using Edge Reflection
480
Evaluation of the File Redundancy in Distributed Database Systems
481
Evaluation of the Financial Derivative Risk from the Probability of Default Angle
482
Evaluation of the Financial Environment in Xi´an Based DEA
483
Evaluation of the financing efficiency for small and medium high-tech enterprises in Henan Province
484
Evaluation of the firmness measurement of fruit by using a non-contact ultrasonic technique
485
Evaluation of the first Brazilian atomic clock
486
Evaluation of the first Silicon Photomultiplier matrices for a small animal PET scanner
487
Evaluation of the first year of scientific use of the French ROV Victor 6000
488
Evaluation of the Fisher discriminant and chi-square distance metric in network intrusion detection
489
Evaluation of the fit between a firm´s manufacturing structure and its business strategy: a methodology
490
Evaluation of the fitting process in diffusion MRI analysis using digital phantom of the human brain
491
Evaluation of the Flavor Development Based on Sensors and Actuators Technology and SPME-GC-MS Analysis
492
Evaluation of the FlexToT ASIC on the readout of SiPM matrices and scintillators for PET
493
Evaluation of the flywheel potential for providing regulation service in California
494
Evaluation of the forest damage by typhoon using remote sensing technique
495
Evaluation of the fractal dimension of an image using the wavelet transform: comparison with a standard method
496
Evaluation of the fracture behaviour of surface mounted technology components by electrical measurements
497
Evaluation of the Fracture Parameters in a Cracked Plate Using the Crack Opening Displacements
498
Evaluation of the freezing point of zinc for Pt/Pd thermocouple calibration
499
Evaluation of the Frequency Dependence of the Resistance and Capacitance Standards in the BIPM Quadrature Bridge
500
Evaluation of the frequency dependence of the resistance and capacitance standards in the BIPM quadrature bridge
501
Evaluation of the front-fixing method capabilities for numerical modelling of diffusion in moving systems
502
Evaluation of the front-fixing method capabilities for numerical modelling of field diffusion in high-temperature superconducting tapes
503
Evaluation of the Function of Reforestation on Soil Loss Control in the Dabie Mountains, China
504
Evaluation of the functionality of a traditional setting policy applied on directional earth fault function
505
Evaluation of the fuse effect propagation in networks infrastructures with different types of fibers
506
Evaluation of the fuse effect propagation velocity in bend loss insensitive fibers
507
Evaluation of the FY and HY data for Sea Surface Temperature observations
508
Evaluation of the G.729 speech coder with pathological voice samples
509
Evaluation of the gallager adaptive convolutional codes on real channels
510
Evaluation of the gated transmission mode in CDMA2000 1XRTT speech connections
511
Evaluation of the generative and discriminative text-independent speaker verification approaches on handheld devices
512
Evaluation of the generic open architecture framework [for weapons systems]
513
Evaluation of the geographic information potential of SPOT5
514
Evaluation of the geometric, scatter and septal penetration components in fan beam collimators using Monte Carlo simulation
515
Evaluation of the geometric, scatter, and septal penetration components in fan-beam collimators using Monte Carlo simulation
516
Evaluation of the Global Address Space Programming Interface (GASPI)
517
Evaluation of the global orbit correction algorithm for the APS real-time orbit feedback system
518
Evaluation of the GM-PHD filter for multi-target tracking with a stereo vision system
519
Evaluation of the governance of information technology at Pertamina´s Central Hospital used Framework COBIT 5
520
Evaluation of the grading performance of an ensemble-based microaneurysm detector
521
Evaluation of the Greedy Recovery Strategy in VANETs
522
Evaluation of the Green´s function for the mixed potential integral equation (MPIE) method in the time domain for layered media
523
Evaluation Of The Grey-level Co-occurrence Matrix Method For Land-cover Classification Using Spot Imagery
524
Evaluation of the grounding circuit measurements for stator ground-fault location of synchronous generators
525
Evaluation of the Grounding Resistance of Conductors Buried in Steplike Terrain
526
Evaluation of the group study using peer review in the lesson of programming
527
Evaluation of the GTO for 270 MVA Interrupter Applications
528
Evaluation of the Guang Dong lightning location system with transmission line fault data
529
Evaluation of the H.264 Scalable Video Coding in Error Prone IP Networks
530
Evaluation of the Half-Value Layer and the validity of Inverse-Square Law applied to radiology: Comparison among Deterministic Calculation, Monte Carlo Method and Experimental Results
531
Evaluation of the handwriting function of an "on-door" communication system
532
Evaluation of the Hardware for a Mobile Measurement Station
533
Evaluation of the hardware specialization techniques for vibration control applications
534
Evaluation of the haystack antenna and radome
535
Evaluation of the HD and HD+TOF reconstructions for Siemens´ Biograph-mCT TOF PET scanner
536
Evaluation of the heart rate variability using the HRV analysis during general anesthesia
537
Evaluation of the Heat Transfer Coefficient in Microcircuits From the Frequency Analysis of the Thermal Transient Response
538
Evaluation of the Hierarchical Temporal Memory as Soft Computing Platform and its VLSI Architecture
539
Evaluation of the high-frequency small-signal performance of bipolar transistors under avalanche conditions
540
Evaluation of the horizontal accuracy on the 1% sediment thickness points used to define the outer limit of the continental shelf
541
Evaluation of the horizontal to vertical transverse impedance ratio for LHC beam screen using a 2D electrostatic code
542
Evaluation of the hot embossing technology for the fabrication of resonant circuits as instrument visualization method for interventional magnetic resonance imaging
543
Evaluation of the HRRT and the HR+ for the task of relative region analysis using a realistic head and brain phantom
544
Evaluation of the Huffman Encoding for Memory Optimization on Hardware Network Intrusion Detection
545
Evaluation of the Human Eye Glare after Strong Exposure
546
Evaluation of the human vibration for autonomous power source
547
Evaluation of the hybrid bootstrap mechanism for multicast routing
548
Evaluation of the hybrid four-level converter employing half-bridge modules for two different modulation schemes
549
Evaluation of the Hybrid Multithreading Programming Model using Image Processing Transforms
550
Evaluation of the hydrophobic property of composite insulators using Dynamic Drop Test
551
Evaluation of the hydrophobicity-dynamics of artificially polluted silicone-rubber model insulators
552
Evaluation of the HyperVerse Avatar Management Scheme Based on the Analysis of Second Life Traces
553
Evaluation of the ICS and DEW scatter correction methods for low statistical content scans in 3D PET
554
Evaluation of the Iddq Signature in devices with Gauss-distributed background current
555
Evaluation of the Identity and Compatibility of Multi-valued Cells in Two-Dimensional Codes Using Smartphones
556
Evaluation of the IEC 61000-3-11 procedures for the connection of multiple items of equipment
557
Evaluation of the IEEE 802.11aa group addressed service for robust audio-video streaming
558
Evaluation of the IEEE 802.11p MAC Method for Vehicle-to-Vehicle Communication
559
Evaluation of the IEEE 802.16 Mesh MAC for Multihop Inter-ship Communications
560
Evaluation of the image quality based on random measurements
561
Evaluation of the impact in reducing the number of parameters for continuous speech recognition for Brazilian Portuguese
562
Evaluation of the impact of 4D reconstruction algorithms in quantitative dynamic SPECT
563
Evaluation of the impact of a large cyclic load on the LILCO power system using time simulation and frequency domain techniques
564
Evaluation of the impact of a new biomedical equipment technician curriculum in Rwanda
565
Evaluation of the impact of a new quality control method on assimilation of CrIS data in HWRF-GSI
566
Evaluation of the impact of antenna parameters on the performance of Six-port radar
567
Evaluation of the impact of data communications equipage level on air traffic controller workload using the functional near infra-red imaging technique
568
Evaluation of the impact of data communications on controller workload using the functional near infra red imaging technique
569
Evaluation of the impact of distributed generation on power losses by using a sensitivity-based method
570
Evaluation of the impact of electric heat pumps and distributed CHP on LV networks
571
Evaluation of the impact of electric vehicles on distribution systems combining deterministic and probabilistic approaches
572
Evaluation of the Impact of Filter Shape on the Performance of SOA-Assisted SS-WDM Systems Using Parallelized Multicanonical Monte Carlo
573
Evaluation of the impact of ionospheric asymmetry on GNSS Radio Occultation inversion products using NeQuick and IRI
574
Evaluation of the impact of lakes on passive microwave snow retrieval algorithms using ground-based observation
575
Evaluation of the impact of large scale integration of micro-generation units in low and Medium Voltage distribution networks
576
Evaluation of the impact of large-scale electric vehicle on power grid economy
577
Evaluation of the impact of layout on device and analog circuit performance with lateral asymmetric channel MOSFETs
578
Evaluation of the impact of mechanical stress on CMOS device mismatch
579
Evaluation of the impact of Miss Table and victim caches in parallel embedded systems
580
Evaluation of the impact of mobility on typical KPIs used for the assessment of QoS in mobile networks: An analysis based on drive-test measurements
581
Evaluation of the Impact of Multipath Data Dispersion for Anonymous TCP Connections
582
Evaluation of the impact of packet drops due to AQM over capacity limited paths
583
Evaluation of the impact of partial shading on the performance of a grid-tied photovoltaic system
584
Evaluation of the impact of personal computers, networks and access to data bases at the University of Chile School of Medicine
585
Evaluation of the impact of plug-in electric vehicle loading on distribution system operations
586
Evaluation of the impact of Plug-in Electric Vehicles on the load profile of commercial buildings: a stochastic model
587
Evaluation of the impact of proximity effect in the calculation of the internal impedance of cylindrical conductors
588
Evaluation of the impact of RES integration on the Greek electricity market by mid-term simulation
589
Evaluation of the impact of resolution-sensitivity tradeoffs on detection performance for SPECT imaging
590
Evaluation of the Impact of Selfish Nodes in Ad Hoc Networks and Detection and Countermeasure Methods
591
Evaluation of the impact of solder die attach versus epoxy die attach in a state of the art power package
592
Evaluation of the impact of storage systems on grid electricity demand in the German context
593
Evaluation of the Impact of Superconducting Fault Current Limiters on Power System Network Protections Using a RTS-PHIL Methodology
594
Evaluation of the impact of the different charging algorithms on the lead-acid batteries lifetime
595
Evaluation of the impact of the sampling frequency offset on the performance of the passive radar based on DVB-T signal
596
Evaluation of the impact of the virtual phase centre effect on the accuracy of the positioning system
597
Evaluation of the impact of tube current modulation on lesion detectability using model observers
598
Evaluation of the Impact of User-Cognitive Styles on the Assessment of Text Summarization
599
Evaluation of the impact of variable system inertia on the performance of frequency based protection
600
Evaluation of the impact of view differentiation and backprojection weight in circle-plus-line cone-beam tomography
601
Evaluation of the Impact on the Emotion of Young People Listening Attentively in at the Time of Using a Photograph of the Memory of the Elderly
602
Evaluation of the Impacts of a Provider-Focused Telehomecare Intervention: A Pre-Post Study
603
Evaluation of the impacts of data hot-spots in disk arrays on performance and availability
604
Evaluation of the impacts of deep penetration of wind resources on transmission utilization and system stability
605
Evaluation of the impacts of electric power quality costs in industrial production: Case studies in Northeast Brazil
606
Evaluation of the implementations of the Mehrotra type predictor-corrector method on MARKAL type energy models
607
Evaluation of the importance of mechatronical concepts in practical applications
608
Evaluation of the Importance of Network Nodes Based on Weighted Network Model
609
Evaluation of the Improved EPCLB Algorithm for Distributed Applications
610
Evaluation of the improved parametric linear combination pulse in digital baseband communication systems
611
Evaluation of the improvement in the position estimate accuracy of UMTS mobiles with hybrid positioning techniques
612
Evaluation of the improvement provided by hybrid configuration of NRZ and nyquist spectrally shaped subcarriers over homogeneous configuration using guard bands
613
Evaluation of the impulse response energy of a 2-D linear discrete separable-denominator system
614
Evaluation of the Impulse Response of an Ultra-Wide Band Antenna by Deconvolution Using the Method of Moments
615
Evaluation of the IMS snow map in southern China based on high spatial resolution imagery
616
Evaluation of the incorporation of recycled material in the dielectric properties of high density polyethylene
617
Evaluation of the index quality image analysing microcalcifications in digitized mammographic images
618
Evaluation of the induced voltage in driven electrodes of piezoelectric tube actuators for sensorless nanopositioning
619
Evaluation of the Industrial and Social Impacts of Science and Technology Using Patents and News Articles
620
Evaluation of the infill algorithm for trajectory planning of pointed ends for droplet-generating 3D printers
621
Evaluation of the infimal H∞ norm in continuous and discrete systems
622
Evaluation of the influence of a finitely long circular cylindrical shield on the electromagnetic field
623
Evaluation of the influence of a scanning method on the resulting quality of the GPR images
624
Evaluation of the influence of convective energy in HBTs using a fully hydrodynamic model
625
Evaluation of the influence of design and operation of standard induction motors on sensorless control schemes utilising saliencies in the transient electrical behaviour
626
Evaluation of the influence of land cover on the noise level of ERS-scatterometer backscatter
627
Evaluation of the influence of nano fillers on the electrical and dielectric properties of epoxy resin
628
Evaluation of the Influence of Probe Pressure on the B-mode Ultrasound Measurement of Arterial Diameter
629
Evaluation of the influence of repair-joint number increase on the outage frequency of medium voltage cables
630
Evaluation of the Influence of Rotor Axial Air Ducts on Condition Monitoring of Induction Motors
631
Evaluation of the influence of rotor axial air ducts on condition monitoring of induction motors
632
Evaluation of the influence of rotor magnetic anisotropy on condition monitoring of 2 pole induction motors
633
Evaluation of the Influence of Rotor Magnetic Anisotropy on Condition Monitoring of Two-Pole Induction Motors
634
Evaluation of the influence of the chaotic ferroresonance in transformer on the power system work conditions
635
Evaluation of the influence of the polarimetric calibration process on the H/A/alpha decomposition
636
Evaluation of the Influence of Time Synchronisation on Classification Learning Based Movement Detection with Accelerometers
637
Evaluation of the influence of various nanofillers on the AC breakdown strength of epoxy-based nanocomposites
638
Evaluation of the influence of varying electrode materials within the thermo-crimping process
639
Evaluation of the information content of wideband and ultra-wideband radar returns from an F14, F15 and F16 using asymptotic electromagnetic techniques
640
Evaluation of the information-theoretic construction of multiple classifier systems
641
Evaluation of the Inherent Ripple Effects on the Performance of an Optical DQPSK Signal Generated by Using Only One MZM
642
Evaluation of the input current quality by three different modulation strategies for SVM controlled matrix converters with input voltage unbalance
643
Evaluation of the input impedance of a top-loaded monopole in a parallel-plate waveguide by the MoM/Green´s function method
644
Evaluation of the in-situ UV oxidation technioue for tunnel-junction preparation
645
Evaluation of the insulation design of polymer housed surge arresters using salt-fog test
646
Evaluation of the Insulation of 15 kV - 25 kV Feeders and Procedures for Substitution of Damaged Units
647
Evaluation of the insulation of 15 kV-25 kV feeders and procedures for substitution of damaged units
648
Evaluation of the integral of exponentially weighted squared errors
649
Evaluation of the Integrals Occurring in the Study of Circular Microstrip Disk
650
Evaluation of the Integration Method for Analysis of Nonstandard Surge Voltages [includes discussion]
651
Evaluation of the Intel® Core™ i7 Turbo Boost feature
652
Evaluation of the intensity of the utilization of land used as the rural residential areas from the view point of low carbon — Bsed on the case stuy of County Lai Shui
653
Evaluation of the interaction between human and power assist orthosis
654
Evaluation of the interaction between SAR L-band signal and structural parameters of forest cover
655
Evaluation of the inter-cluster data transfer on Grid environment
656
Evaluation of the interfacial resistance between carbon nanotube and silicon by using molecular dynamics simulations
657
Evaluation of the interference of pulsed UWB signals over current services in CATV installations
658
Evaluation of the interference potential of in-home power line communication systems
659
Evaluation of the Interference Potential of PLC Systems
660
Evaluation of the interference rejection capability of a uniform circular array in CDMA systems
661
Evaluation of the interferences in the interconnection point between 2×25kVac High-Speed railway lines and 3kVdc regional system
662
Evaluation of the Interferences of GNSS (Galileo/GPS) signals on Air Traffic Control Radar and Wind Profiler Radar
663
Evaluation of the Interleaved Source Coding (ISC) Under Packet Correlation
664
Evaluation of the Intermodulation Product Performance of Reflector Antennas and Related Structures by Microwave Imaging
665
Evaluation of the intermodulation product performance of reflector antennas and related structures by microwave imaging
666
Evaluation of the Internal Calibration Methodologies for Spaceborne Synthetic Aperture Radars with Active Phased Array Antennas
667
Evaluation of the Internal Insulation of Generator Coils Based on Power-Factor Measurements
668
Evaluation of the internal quantum efficiency and saturation current of heavily doped emitters
669
Evaluation of the Ionization and Recombination Processes in Low-Density Plasma Based on the Statistical Model of Atom
670
Evaluation of the IPO-Family algorithms for test case generation in web security testing
671
Evaluation of the IR transitions in rare-earth-doped chalcogenide glasses
672
Evaluation of the IRI model efficiency for operational forecast of HF propagation conditions
673
Evaluation of the iron loss of an inductor based on dynamic minor characteristics
674
Evaluation of the ISDN market in France
675
Evaluation of the Isotropic Coverage of an Antenna in a Multipath Environment
676
Evaluation of the issues involved with test structures for the measurement of sheet resistance and linewidth of copper damascene interconnect
677
Evaluation of the ITOC information system design recovery tool
678
Evaluation of the JACO robotic arm: Clinico-economic study for powered wheelchair users with upper-extremity disabilities
679
Evaluation of the JIAJIA software DSM system on high performance computer architectures
680
Evaluation of the Joint Aquatic Toxicity of PNCB, MDNB and CDNB Acting on Brocarded Carp (Cyprinus Carpio)
681
Evaluation of the Karolinska new positron camera system; the Scanditronix PC2048-15B
682
Evaluation of the Klein HydroChart 3500 interferometric bathymetry sonar for NOAA sea floor mapping
683
Evaluation of the Komodo microcontroller and the OSA+ middleware using an autonomous guided vehicle
684
Evaluation of the kurtosis algorithm in detecting radio frequency interference from multiple sources
685
Evaluation of the Lagrangian method for deriving equivalent circuits of integrated magnetic components: A case study using the integrated winding coupled inductor
686
Evaluation of the Lagrangian Method for Deriving Equivalent Circuits of Integrated Magnetic Components: A Case Study Using the Integrated Winding Coupled Inductor
687
Evaluation of the land-use suitability of Jinan City based on GIS and landscape metrics
688
Evaluation of the LANL hand held multiplicity register and Canberra JSR-15
689
Evaluation of the large array method
690
Evaluation of the large-signal behaviour of active filters
691
Evaluation of the lasting impacts on employability of co-operative serious game-playing by first year Computing students: An exploratory analysis
692
Evaluation of the layered structure of aortic valve cusps using high-frequency ultrasound [bioprosthetic heart valve applications]
693
Evaluation of the LDR protocol in a hybrid sensor networks/MANET architecture
694
Evaluation of the LDR protocol in a hybrid sensor networks/MANET architecture
695
Evaluation of the learning effectiveness of game-based and hands-on gear train laboratories
696
Evaluation of the Learning of Scientific English in Podcasting PCs, MP3s, and MP4s Scenarios
697
Evaluation of the Lee Method for the analysis of long-term and short-term variations in the digital broadcasting services in the MW band
698
Evaluation of the level of informatization in colleges based on fuzzy comprehensive method
699
Evaluation of the level of stress in rats of the species Rattus norvegicus submitted to microwave radiation
700
Evaluation of the Levelized Cost of Energy Method for Analyzing Renewable Energy Systems: A Case Study of System Equivalency Crossover Points Under Varying Analysis Assumptions
701
Evaluation of the Levels of Manufacturers Developing Low-Carbon on BP Neural Network
702
Evaluation of the life cycle cost for universal fiber access
703
Evaluation of the lightning protection system for fighting vehicles
704
Evaluation of the Limiting Efficiencies of Photovoltaic Converters under Monochromatic Illumination
705
Evaluation of the Limiting Permissible Concentration Concept in Ocean Dumping Assessments
706
Evaluation of the loaded and unloaded q-factors of traveling-wave whispering-gallery-mode resonators
707
Evaluation of the local shift-invariance approximation in pinhole SPECT
708
Evaluation of the local state fair share bandwidth algorithm
709
Evaluation of the logarithmic-sensitivity index as a neural network stopping criterion for rare outcomes
710
Evaluation of the logistics cost of cities based on DEA model
711
Evaluation of the log-likelihood cost function for learning in feed-forward networks
712
Evaluation of the London driver information system: results from the CLEOPATRA study
713
Evaluation of the long term stability of standard inductors Using Bayesian Statistics
714
Evaluation of the Long-Term Thermal Capability of a High-Temperature Insulation System Using Silicone Liquid as a Dielectric Coolant
715
Evaluation of the Lorentz group Lie algebra map using the Baker-Cambell-Hausdorff formula
716
Evaluation of the Lorentz law by using a Barlow wheel
717
Evaluation of the losses in unbalanced three-phase power systems
718
Evaluation of the Losses Involved in Combining the Power from Locked Microwave Oscillators
719
Evaluation of the low cost telemedicine system in Taiwan
720
Evaluation of the Low Error-Rate Performance of LDPC Codes over Rayleigh Fading Channels Using Importance Sampling
721
Evaluation of the Low Frame Error Rate Performance of LDPC Codes Using Importance Sampling
722
Evaluation of the low power operation of ferroelectric emission cathodes for electric propulsion
723
Evaluation of the low temperature slurry catalyst, Copper Zinc oxide, in the conversion of Carbon monoxide using the water gas shift reactionfor hydrogen cleanup from biomass
724
Evaluation of the lower limit of crystal oscillator noise through the resonator´s design parameters
725
Evaluation of the low-frequency neutral-point voltage oscillations in the three-level inverter
726
Evaluation of the low-frequency neutral-point voltage oscillations in the three-level inverter
727
Evaluation of the LTE positioning capabilities under typical multipath channels
728
Evaluation of the Luminescence Efficiency of YAG:Ce Powder Scintillating Screens for Use in Digital Mammography Detectors
729
Evaluation of the luminescence efficiency of YAG:Ce powder scintillating screens for use in digital mammography detectors
730
Evaluation of the M&A effectiveness based on grey systems theory and entropy method
731
Evaluation of the machine non-linearities as an aid to develop self-commissioning in sensorless drives
732
Evaluation of the Magnetic Field Generated by the Inverter of an Electric Vehicle
733
Evaluation of the Magnetic Field in a Permanent Magnet-Type Linear Motor
734
Evaluation of the magnetic field within a BPSCCO cylinder superimposed by multi-layered soft-iron cylinders by use of an HTS DC-SQUID
735
Evaluation of the magnetization direction effects on ferrite PM brushless fractional machines
736
Evaluation of the Main MPPT Techniques for Photovoltaic Applications
737
Evaluation of the mainstream wind turbine concepts considering their reliabilities
738
Evaluation of the maintainability of object-oriented software
739
Evaluation of the maintenance management function for a control plant at a substation
740
Evaluation of the MAP decoder for the turbo codes of IMT-2000
741
Evaluation of the marginal based remuneration-a case study using the Portuguese transmission network
742
Evaluation of the marginal outage costs in interconnected and composite power systems
743
Evaluation of the marginal outage costs in interconnected generating systems
744
Evaluation of the marginal outage costs of generating systems for the purposes of spot pricing
745
Evaluation Of The MARS Fault Tolerance Mechanisms Using Three Physical Fault Injection Techniques
746
Evaluation of the masked node problem in ad hoc wireless LANs
747
Evaluation of the material parameters of piezoelectric materials by various methods
748
Evaluation of the maximum a posteriori (MAP) reconstruction on a microPET Focus220 scanner
749
Evaluation of the maximum level reached by a queue over a finite period
750
Evaluation of the maximum permissible transmission distance for the mixed-HDWDM systems
751
Evaluation of the maximum potential rise in Taipei rail transit systems
752
Evaluation of the Maximum Power Point Tracking performance in small wind turbines
753
Evaluation of the Mean Error-Free Interval of a Noisy Data Channel
754
Evaluation of the mean-squared error for optimum line source patterns
755
Evaluation of the mean-variance mapping optimization for solving multimodal problems
756
Evaluation of the measurement equipment for electromagnetic fields in the near-field and far-field zones
757
Evaluation of the measurement uncertainties in the conducted emissions from adjustable speed electrical power drive systems
758
Evaluation of the measurement update interval for an adaptive radar scheduler
759
Evaluation of the mechanical characteristics of human thighs for developing complex dummy tissues
760
Evaluation of the Mechanical Integrity of Beam Lead Devices and Bonds using Thermomechanical Stress Waves
761
Evaluation of the mechanical properties of active skeletal muscle using acoustic radiation force impulse imaging
762
Evaluation of the mechanical properties of irradiated NPP´s structural materials using semidestructive testing method
763
Evaluation of the mechanical system to produce file cutting edges in a industrial machine: Theoretical and experimental approaches
764
Evaluation of the MERIS terrestrial chlorophyll index
765
Evaluation of the methane and electrical energy potential and carbon credits revenues from the Goiânia landfill
766
Evaluation of the methods for pupil size estimation: on the perspective of autonomic activity
767
Evaluation of the Metrological Reliability of the Means of Measuring Techniques of the Aircraft Radio Systems
768
Evaluation of the micro wobble motor fabricated by concentric build-up process
769
Evaluation of the Micro-Angiographic Fluoroscope as a High-Resolution, Single-Photon Counting and Energy-Integrating Imager for Transmission and Emission Imaging
770
Evaluation of the microcirculation on perfusion-phase analysis of ultrasound contrast echocardiography using intuitive and easy-to-use software tools
771
Evaluation of the micro-phase diagram near the stoichiometric composition of the Bi2Te3-Sb2Te3 alloys
772
Evaluation of the Microsoft Kinect for screening ACL injury
773
Evaluation of the microstructure and physical properties of metallic materials treated with pulsed, intense ion beams
774
Evaluation of the Millimeter-Wave Characteristics of Dielectric Substrates by using Whispering Gallery Mode Resonators
775
Evaluation of the MIMO performance of LTE handsets
776
Evaluation of the minimum overflow threshold of bayes codes for a Markov source
777
Evaluation of the minimum radiation Q for electrically small antennas in spheroidal coordinates
778
Evaluation of the minority carrier diffusion length and surface-recombination velocity in GaAs p/n solar cells
779
Evaluation of the Minstrel rate adaptation algorithm in IEEE 802.11g WLANs
780
Evaluation of the mixed service ability for competitive third generation multiple access technologies
781
Evaluation of the Mobile Medical Monitor (M3) in a field environment
782
Evaluation of the Model Curriculum in Computer Science and Engineering
783
Evaluation of the Modeling of an EM Illumination on an Aircraft Cable Harness
784
Evaluation of the Modelling of Local Areas and Errors of Localization in FRGC´ 05
785
Evaluation of the modern visual SLAM methods
786
Evaluation of the modified group delay feature for isolatedword recognition
787
Evaluation of the MODIS vegetation index compositing algorithm using SeaWiFS data
788
Evaluation of the moisture content in power transformer
789
Evaluation of the molar volume of silicon crystals for a determination of the Avogadro constant
790
Evaluation of the molar volume of silicon crystals for a determination of the Avogadro constant
791
Evaluation of the mono-static microwave radar algorithms for breast imaging
792
Evaluation of the morphological parameters of cancer cells using high-frequency ultrasound and photoacoustics
793
Evaluation of the most recent reprocessed SMOS soil moisture products: Comparison between SMOS level 3 V246 and V272
794
Evaluation of the movement imagination training using the principal component analysis and magnitude-squared coherence as extractors of features
795
Evaluation of the MPPT performance in small wind turbines by estimating the tip-speed ratio
796
Evaluation of the Multicast Mode of MBMS
797
Evaluation of the multichannel sea surface temperature algorithm along the Brazilian coast
798
Evaluation of the multimedia-multicast-mobile-terminal for hospital patient care
799
Evaluation of the multimetric proactive routing protocol implementation for mobile ad-hoc networks
800
Evaluation of the multipath characteristics of the impulse radio channel
801
Evaluation of the multipath-induced error probability on the estimation of code-based pseudoranges
802
Evaluation of the multiple frequency distribution of conduction block in atrial fibrillation
803
Evaluation of the Muscle Fatigue Based on Ultrasound Images
804
Evaluation of the mutual coupling between shipborne antennas
805
Evaluation of the MXQ mechanism by audio and video applications
806
Evaluation of the national airspace system aggregate performance sensitivity
807
Evaluation of the National Concept Traffic Management for mass evacuation in the Netherlands
808
Evaluation of the natural recovery in an artificially modified geography
809
Evaluation of the NCEP and MODIS Atmospheric Products for Single Channel Land Surface Temperature Retrieval With Ground Measurements: A Case Study of HJ-1B IRS Data
810
Evaluation of the near-field injection method at integrated circuit level
811
Evaluation Of The Need For An Automatic Backup Control System For The Jarvik 2000 Axial Flow Blood Pump System
812
Evaluation of the NEPSAC nonlinear predictive controller on a thermal process
813
Evaluation of the network structure of electrical transmission networks
814
Evaluation of the neuropeptides level using a surface enhanced mobile spectroscopy system
815
Evaluation of the NeuroSky MindFlex EEG headset brain waves data
816
Evaluation of the new feature types for question classification with support vector machines
817
Evaluation of the new generation of system-on-chip platforms for controlling electrical systems
818
Evaluation of the New Generation RCA 8854 Photomultiplier
819
Evaluation of the new OASIS format for layout fill compression
820
Evaluation of the new semi-terrain based propagation model recommendation ITU-R P.1546
821
Evaluation of the New Sensorless Approach in Energy Storage Charge Balancing
822
Evaluation of the next generation gamma imager
823
Evaluation of the next steps in satellite high power amplifier technology: Flexible TWTAs and GaN SSPAs
824
Evaluation of the NOAA Real Time Ocean Forecast System_Atlantic for Operational Use at the NOAA Ocean Prediction Center
825
Evaluation of the noise effects on Visible Light Communications using Manchester and Miller coding
826
Evaluation of the Nonlinear Distortion Caused by the Finite Turn-Off of a Sample-and-Hold-Circuit for High-Speed PCM
827
Evaluation of the normal force of a planar actuator
828
Evaluation of the normal force of a planar actuator
829
Evaluation of the normalized parametric adaptive matched filter STAP test in airborne radar clutter
830
Evaluation of the normalized proportional allocation scheme´s application to the asynchronous bandwidth in the fieldbus protocol
831
Evaluation of the Normal-Zone Propagation Characteristics of REBCO Coated Conductors With Laminated Cu Tape
832
Evaluation of the Norton equations for the development of body-centric propagation models
833
Evaluation of the Notification Oriented Paradigm Applied to Real-Time Systems
834
Evaluation of the Notification Oriented Paradigm Applied to Sentient Computing
835
Evaluation of the novel 3D SPECT modelling algorithm in the STIR reconstruction framework: Simple vs. full attenuation correction
836
Evaluation of the NPS PHOENIX autonomous underwater vehicle hybrid control system
837
Evaluation of the Nuclear Steam Supply System Instrumentation and Control Equipment during Initial Maine Yankee Operation
838
Evaluation of the number of destination hosts for data networking and its application to address cache design
839
Evaluation of the number of PPG harmonics to assess Smartphone effectiveness
840
Evaluation of the number of segments using weighted entropy
841
Evaluation of the Numerical Method Runge-Kutta Used in the Oil Dispersion ECOS Model
842
Evaluation of the odor quality by substructures of odor molecules using integrated multi-channel odor sensor
843
Evaluation of the ohmic properties of the silver metal contacts of an improved sintering process on the multicrystalline silicon solar cells
844
Evaluation of the oil spill accident threaten degree based on the D-S evidence theory
845
Evaluation of the online assessment test using process mining (Case Study: Intensive English Center)
846
Evaluation of the openness of automation tools for interoperability in engineering tool chains
847
Evaluation of the operation of a vector-controlled induction machine drive system fed by a matrix converter under distorted input voltage and load torque conditions
848
Evaluation of the operation of depletion-mode SiC power JFET in DC-DC converter applications
849
Evaluation of the operational condition and reliability of surge arresters used on medium voltage networks
850
Evaluation of the operative state of power capacitors of the distribution system
851
Evaluation of the Operative State of Power Capacitors of the Distribution System
852
Evaluation of the Opposition Ability for Hand Intrinsic Damage Using a Simple Self-Constructing Electromyography
853
Evaluation of the optical-coupling efficiency of InGaAlAs-InGaAsP butt joint using a novel multiple butt-jointed laser
854
Evaluation of the Optimal SRPT Strategy with Overhead
855
Evaluation Of The Optimum Symbol State For Pilot Symbol Insertion 16-QAM
856
Evaluation of the optimum tilt angles for elevation-scanned phased-array radars
857
Evaluation of the ordered-subset transmission (OSTR) algorithm for transmission imaging on SPECT systems using axially overlapping cone-beams
858
Evaluation of the oscillation-based test methodology for micro-electro-mechanical systems
859
Evaluation of the output error in an optical passive ring-resonator gyro with a 90 degrees polarization-axis rotation in the polarization-maintaining fiber resonator
860
Evaluation of the output power control of multi communication system mobile phones
861
Evaluation of the outsourcing services customer rating
862
Evaluation of the oven reflow bonding and flip chip bonder bonding of lead free Sn0.7Cu solder bumped die on low-cost FR-4 substrate for flip-chip applications
863
Evaluation of the overall efficiency of a low pressure proton exchange membrane fuel cell power unit
864
Evaluation of the overheads and latencies of a virtualized RTOS
865
Evaluation of the P2P file sharing technique by Indexed-Priority Metric
866
Evaluation of the P2P streaming media´s structure based on structure-entropy model
867
Evaluation of the packaging and encapsulation reliability in fully integrated, fully wireless 100 channel Utah Slant Electrode Array (USEA): Implications for long term functionality
868
Evaluation of the packet reservation multiple access protocol for supporting multimedia services over wireless networks
869
Evaluation of the Parallel Conductor Theory for Measuring Human Limb Blood Flow by Electrical Admittance Plethysmography
870
Evaluation of the parallelization potential for efficient multimedia implementations: dynamic evaluation of algorithm critical path
871
Evaluation of the parameters influencing the behaviour of the gas recombining Pb-acid batteries
872
Evaluation of the parameters of spectral subtraction techniques and its effects on speech signal quality
873
EVALUATION OF THE PARSEVAL´S INTEGRALS IN THE ANALOG DOMAIN
874
Evaluation of the partially-depleted silicon-on-sapphire technology for microwave amplifiers and other prospective applications
875
Evaluation of the performance and reliability of a 1M SRAM on fully-depleted SOI
876
Evaluation of the performance characteristics of CGLSS II and U.S. NLDN using ground-truth data from Launch Complex 39B, Kennedy Space Center, Florida
877
Evaluation of the performance characteristics of the North American Lightning Detection Network based on recent CN Tower lightning data
878
Evaluation of the Performance Characteristics of the North American Lightning Detection Network Based on Tall-Structure Lightning
879
Evaluation of the performance enhancements for the plane interconnected parallel network
880
Evaluation of the performance limit of MPPC for ToF-PET
881
Evaluation of the Performance of a DC-Link Brake Chopper as a DFIG Low-Voltage Fault-Ride-Through Device
882
Evaluation of the performance of a fuzzy optimal power flow algorithm
883
Evaluation of the performance of a piezoelectric nanowire-based composite microgenerator
884
Evaluation of the performance of a QRS detector for extracting the heart interbeat RR time series from fetal magnetocardiography
885
Evaluation of the performance of a variable speed machine drive under steady state and transient state loading conditions
886
Evaluation of the performance of an experimental somnolence quantification system in terms of reaction times and lapses
887
Evaluation of the performance of antenna pattern correction under the influence of unknown antenna pattern changes
888
Evaluation of the Performance of Back-to-Back HVDC Converter and Variable Frequency Transformer for Power Flow Control in a Weak Interconnection
889
Evaluation of the performance of binary error correcting codes over Gaussian QAM channels
890
Evaluation of the performance of block matching algorithms in wavelet-based t+2D video coding
891
Evaluation of the Performance of BTFCLs for Enhancing LVRT Capability of DFIG
892
Evaluation of the performance of C.S.I.O. pulse oximeter
893
Evaluation of the Performance of Distributed Temperature Measurements With Single-Mode Fiber Using Rayleigh Backscatter up to 1000 ^{\\circ}{\\rm C}
894
Evaluation of the performance of dual chevron bluff body vortex flowmeters
895
Evaluation of the performance of dual-order mode couplers using optical low-coherence reflectometry
896
Evaluation of the performance of error-correcting codes on a Gilbert channel
897
Evaluation of the performance of error-correcting codes on a Gilbert channel
898
Evaluation of the performance of FSO system using OOK and M-PPM modulation schemes in inter-satellite links with turbo codes
899
Evaluation of the performance of indirect control of many DSRs using hardware-in-the-loop simulations
900
Evaluation of the performance of indoor MIMO systems
901
Evaluation of the performance of line protection schemes on the NYSEG six phase transmission system
902
Evaluation of the performance of motion Estimation algorithms in video coding
903
Evaluation of the Performance of Multiantenna Terminals Using a New Approach
904
Evaluation of the performance of multithreaded Cilk runtime system on SMP clusters
905
Evaluation of the performance of NTM function for OS versus the more critical parameters
906
Evaluation of the performance of open-source RDBMS and triplestores for storing medical data over a web service
907
Evaluation of the Performance of Passive Rubidium Frequency Standards Using Cavity Operated in Mode TE011, TE111and TE101
908
Evaluation of the performance of piecewise-linear-prediction coding (PLPC) of speech signals
909
Evaluation of the performance of proximity effect correction in electron-projection lithography
910
Evaluation of the performance of PV modules in Algeria
911
Evaluation of the performance of SCM-based access networks using the spectrally-sliced ASE from a semiconductor optical amplifier
912
Evaluation of the performance of several object types for electrical treeing experiments
913
Evaluation of the performance of spatial assessments of pansharpened images
914
Evaluation of the Performance of Spontaneously Deployed, Independent Networks
915
Evaluation of the performance of strategies for the estimation of low velocity blood flow
916
Evaluation of the performance of TaN diffusion barrier against copper diffusion using SIMS and AFM
917
Evaluation of the Performance of the Double Rowing Hull
918
Evaluation of the performance of the impregnating resin of high voltage electrical machine when exposed to raw natural gas
919
Evaluation of the performance of the large scale network-performance evaluation of the PDC-P network providing the i-mode service
920
Evaluation of the performance of the mobile packet communications network
921
Evaluation of the performance of various artificial neural networks to the signal fault diagnosis in nuclear reactor systems
922
Evaluation of the performance of wearable directive antennas based on Fabry-Perot type
923
Evaluation of the performance potential of organic TFT circuits
924
Evaluation of the performances and costs of a spectrum of dynamic insulin sensitivity test protocols
925
Evaluation of the performances of a novel Punch Through Trench IGBT using a Si(1-x)Ge(x) N+ buffer layer by using finite elements simulations
926
Evaluation of the performances of a silicon optical modulator based on a silicon-oxide-silicon capacitor
927
Evaluation of the performances of ANN and SVM techniques used in water quality classification
928
Evaluation of the performances of efficient transformers in distribution networks by fuzzy techniques
929
Evaluation of the performances of several four-antenna systems in a reverberation chamber
930
Evaluation of the performances of splitted WSN based Connected Dominating Set
931
Evaluation of the permeable base transistor for application in silicon integrated logic circuits
932
Evaluation of the Phadiatop test results using CHAID algorithm and logistic regression
933
Evaluation of the Phase-Inversion Signal Separation Method When Using Nonlinear Hearing Aids
934
Evaluation of the phase-matching properties of nonlinear optical materials in the powder form
935
Evaluation of the Phytoremediation Potential of Saccharum Officinarum for Cd-Contaminated Soil
936
Evaluation of the Phytoremediation Potential of Sugarcane for Metal-Contaminated Soils
937
Evaluation of the piezoresistive and electrical properties of polycrystalline silicon-germanium for MEMS sensor applications
938
Evaluation of the piezoresistive behavior of multifunctional nanocomposites thin films
939
Evaluation of the piezoresistive effect in single crystalline silicon nanowires
940
Evaluation of the Pinus taeda quality using ultrasound
941
Evaluation of the Planar and Normal Forces of an Electromagnetic Planar Actuator
942
Evaluation of the planar and normal forces of an erectromagnedc planar actuator
943
Evaluation of the plankton species coordinates from digital holographic video
944
Evaluation of the plasma distribution of a quasi-linear constricted plasma source
945
Evaluation of the plate-rod model assumption of trabecular bone
946
Evaluation of the P-matrix parameters frequency variation using periodic FEM/BEM analysis [SAW device simulation]
947
Evaluation of the PMHT approach for passive radar tracking with unknown transmitter associations
948
Evaluation of the PMUs Measurement Channels Availability for Observability Analysis
949
Evaluation of the polarization performance of a cone-shaped antenna array
950
Evaluation of the polarization state of piezofiber composites
951
Evaluation of the Polatomic P-2000 laser pumped He-4 magnetometer/gradiometer
952
Evaluation of the positive biased temperature stress stability in HfSiON gate dielectrics
953
Evaluation of the possibilities of limited angle reconstruction for the use of digital Radiography system as a tomograph
954
Evaluation of the possibility of using damping wigglers in the Advanced Photon Source
955
Evaluation of the possibility to use one ultrasonic converter for insonation of objects in the frequency range 0.8-2.7 MHz
956
Evaluation of the Post-Irradiation Temperature Dependence of Operational Amplifier Input Bias Current
957
Evaluation of the Potential Biological Effects of the 60-GHz Millimeter Waves Upon Human Cells
958
Evaluation of the potential cartographic accuracy of Radarsat and JERS-1 data
959
Evaluation of the Potential Ecological Risk of Heavy Metal Pollution in Soil and Bioaccumulation Characteristics of Dominant Plants in Siding Pb-Zn Mineland
960
Evaluation of the potential efficiency of driving aids
961
Evaluation of the potential energy from wave motion on the Sicilian coast
962
Evaluation of the potential for energy-efficient design based on group users behavior in 3GPP IMT-advanced systems
963
Evaluation of the potential for hybridization of gas turbine power plants with renewable energy in South Africa
964
Evaluation of the potential for power line carrier (PLC) to interfere with use of the Nationwide Differential GPS network
965
Evaluation of the Potential for Power Line Carrier (PLC) to Interfere with Use of the Nationwide Differential GPS Network
966
Evaluation of the Potential for Power Line Noise to Degrade Real Time Differential GPS Messages Broadcast at 283.5-325 kHz
967
Evaluation of the potential for power line noise to degrade real time differential GPS messages broadcast at 283.5-325 kHz
968
Evaluation of the potential of ALOS PALSAR polarimetric data for land-cover classification in the northern part of Timan-Pechorian petroleum province
969
Evaluation Of The Potential Of C- And X-band Sar Data To Monitor Dry And Wet Snow Cover
970
Evaluation of the Potential of Elastography Technique for Detecting Different Tumors´ Genera
971
Evaluation of the potential of Hyperion data to estimate wildfire hazard in the Santa Ynez front range, Santa Barbara, California
972
Evaluation of the potential of Hyperion for fire danger assessment by comparison to the Airborne Visible/Infrared Imaging Spectrometer
973
Evaluation of the potential of Landsat ETM+ for forest density mapping in zagros forests of Iran
974
Evaluation of the potential of multi-modal sensors for respiratory motion prediction and correlation
975
Evaluation of the potential of radar ENVISAT data for the updating of numerical thematic maps on the coastal fringe of French Guyana
976
Evaluation of the potential of the GER airborne imaging spectrometer for marine application
977
Evaluation of the potential of ZnSe and Zn(Mg)BeSe compounds for ultraviolet photodetection
978
Evaluation of the potential operational impact of discrepancies between training simulators and reference plants
979
Evaluation of the Potential Performance of Graphene Nanoribbons as On-Chip Interconnects
980
Evaluation of the potential regulation capacity of water heater loads
981
Evaluation of the Potential Toxicity of Metals in Discarded Electronics: A Case Study of Mobile Phones in P. R. China
982
Evaluation of the potential use of m-learning in higher education
983
Evaluation of the power absorbed in a human head model exposed to cellular phones equipped with helical antennas
984
Evaluation of the power absorbed in subjects exposed to EM fields in partially closed environments by using a combined analytical-FDTD method
985
Evaluation of the Power Consumption of Routing Protocols for Wireless Sensor Networks
986
Evaluation of the power of Goodness-of-Fit tests for the comparison of data distributions
987
Evaluation of the power quality from a seawave power farm for different interconnection schemes
988
Evaluation of the power spectral density of guided scrambling coded sequences
989
Evaluation of the Precision-Privacy Tradeoff of Data Perturbation for Smart Metering
990
Evaluation of the predictive capability of Berkeley´s hot-carrier reliability model
991
Evaluation of the predictive capacity of five plant growth models for sugar beet
992
Evaluation of the Preset Travel Routes in a Self-Determination Support System
993
Evaluation of the primary and secondary creep of SnPb solder joint using a modified grooved-lap test specimen
994
Evaluation of the PRMA protocol limiting the front end clipping probability on GSM carriers
995
Evaluation of the probability density functions of distribution system reliability indices with a characteristic functions-based approach
996
Evaluation of the probability of dynamic failure and processor utilization for real-time systems
997
Evaluation of the Probability of K-Hop Connection in Homogeneous Wireless Sensor Networks
998
Evaluation of the Processing Workload for Two Models of Communication Control in IP Networks
999
Evaluation of the production availability of an offshore installation by stochastic Petri nets modeling
1000
Evaluation of the production of a short twin-aperture dipole magnet for LHC from an industrial point of view