Title List مقالات لاتين فني مهندسي Improved ultra-low range sidelobe pulse compression waveform design Improvement in the Resolution of the Reflective Scanning Acoustic Microscope Application to the Non Destructive Evaluation in Microelectronics

بر اساس عنوان

1

Improved ultra-low range sidelobe pulse compression waveform design

2

Improved ultrasonic B-scans using deconvolution and morphological filters

3

Improved ultrasonic near-field scanning using dual-channel digital cancellation network

4

Improved Ultrasonic Phased Array Based on Encoded Transmissions for Obstacle Detection

5

Improved ultrasonic spectroscopy methods for characterization of dispersive materials

6

Improved ultrasound contrast detection combining harmonic power Doppler with a release-burst

7

Improved ultrasound digital beamforming using single-bit sigma-delta modulators with band-pass decimation filters

8

Improved Ultrasound-Mediated Molecular Imaging of Previously Ischemic Mouse Myocardium Using Dual-Targeted Microbubbles and Constant Infusion

9

Improved ultraviolet quantum efficiency using a transparent recessed window AlGaN/GaN heterojunction p-i-n photodiode

10

Improved ultraviolet second-harmonic generation at elevated repetition rates from a medium-scale copper-vapor laser

11

Improved ultra-wide bandwidth bow-tie antenna with metamaterial lens for GPR applications

12

Improved UMTS base station transmitter featuring high efficiency and integrated analogue parts

13

Improved uncertain type of AHP algorithms

14

Improved Uncertainty for the Noise Source based on the Adapter Removal Methods

15

Improved uncertainty of ¹⁷¹Yb optical lattice clock at KRISS

16

Improved unchoking policy for BitTorrent

17

Improved underfill adhesion in flip-chip packages by means of ultraviolet light/ozone treatment

18

Improved understanding and characterisation of rapid thermal oxides

19

Improved understanding and optimization of 0.18um CMOS technology with retrograde channel and pockets

20

Improved understanding of electron density and temperature in a low pressure VHF-CCP from kinetic simulation

21

Improved Understanding of Soil Surface Roughness Parameterization for L-Band Passive Microwave Soil Moisture Retrieval

22

Improved Understanding of Suspended Sediment Transport Process Using Multi-Temporal Landsat Data: A Case Study From the Old Woman Creek Estuary (Ohio)

23

Improved understanding of the Earth´s radiation belts from the CRRES satellite

24

Improved understanding of the loss-of-symmetry phenomenon in the conventional Kalman filter

25

Improved underwater acoustic communication for AUVs

26

Improved underway ADCP data quality through precise heading measurement

27

Improved undetected error probability model for JTEC and JTEC-SQED coding schemes

28

Improved Unicast Capacity Bounds for General Multi-Channel Multi-Radio Wireless Networks

29

Improved unidirectional chosen-ciphertext secure proxy re-encryption

30

Improved unified interconnect unit for high speed and scalable FPGA

31

Improved unified method for the prediction of rain attenuation in terrestrial and earth space links

32

Improved uniformity for thin oxides when using wet thermal oxidation

33

Improved uniformity in bonded SOI wafers with active layers from 1 to 30 /spl mu/m at high throughputs

34

Improved uniformity of contact resistance in GaAs MESFET using Pd/Ge/Ti/Au ohmic contacts

35

Improved uniformity of self-organized In/sub 0.53/Ga/sub 0.47/As/In/sub 0.52/Al/sub 0.48/As quantum wires grown on (775)B-oriented InP substrate by molecular beam epitaxy

36

Improved Uniformity of Sequential Lateral Solidification Thin-Film Transistors

37

Improved uniformity of SI-VB GaAs by annealing

38

Improved union bound for Viterbi decoder of convolutional codes

39

Improved union bound on linear codes for the input-binary AWGN channel, with applications to turbo codes

40

Improved union bounds on turbo codes performance

41

Improved union bounds on turbo codes performance in the Rician fading channel

42

Improved unit selection speech synthesis method utilizing subjective evaluation results on synthetic speech

43

Improved unitary and multicomponent gaseous insulators

44

Improved Unitary and Multicomponent Gaseous Insulators

45

Improved Unitary Root-MUSIC for DOA Estimation Based on Pseudo-Noise Resampling

46

Improved unitary space-time modulation for multiple-antenna rayleigh fading channel

47

Improved unity-STF sturdy MASH ΣΔ modulator for low-power wideband applications

48

Improved universal MOSFET electron mobility degradation models for circuit simulation

49

Improved unscented kalman filter for bounded state estimation

50

Improved unscented Kalman particle filter

51

Improved unscented kalman smoothing for stock volatility estimation

52

Improved unscented particle filter for nonlinear bayesian estimation

53

Improved Unsupervised Clustering over Watershed-Based Clustering

54

Improved Unsymmetric-Cross Multi-Hexagon-Grid Search Algorithm for Fast Block Motion Estimation

55

Improved unsynchronized two-end algorithm for locating faults in power transmission lines

56

Improved update operators for lifting-based motion-compensated temporal filtering

57

Improved update steps through motion vector correlation analysis for scalable video coding

58

Improved updating of Euclidean distance maps and Voronoi diagrams

59

Improved uplink cell capacity in CDMA systems using a new dynamic distribution algorithm

60

Improved uplink I/Q-signal forwarding for cloud-based radio access networks with millimeter wave fronthaul

61

Improved Uplink Macro Diversity Combining in Evolved HSPA Systems

62

Improved upper bound for erasure recovery in binary product codes

63

Improved upper bound for sorting by short swaps

64

Improved upper bound for the redundancy of fix-free codes

65

Improved upper bound for the redundancy of fix-free codes

66

Improved upper bound on bit error rate for truncated convolutional codes

67

Improved upper bound on capacity of optical IM/DD channels using binary pulse amplitude modulation

68

Improved upper bound on step-size parameters of discrete-time recurrent neural networks for linear inequality and equation system

69

Improved upper bound on the bit error probability of turbo codes for ML decoding with imperfect CSI in a Rayleigh fading channel

70

Improved Upper Bounds for Approximate Lattice Decoding With Dual-Basis Reduction

71

Improved upper bounds for codes with unequal error protection

72

Improved upper bounds for codes with unequal error protection

73

Improved upper bounds for the mixed structured singular value

74

Improved upper bounds for the structured singular value

75

Improved upper bounds of the structured singular value

76

Improved Upper Bounds on Binary Identifying Codes

77

Improved upper bounds on error-probability for biorthogonal trellis-coded CDMA systems

78

Improved upper bounds on shellsort

79

Improved upper bounds on sizes of codes

80

Improved Upper Bounds on Stopping Redundancy

81

Improved upper bounds on the capacity of binary channels with causal adversaries

82

Improved upper bounds on the ensemble performance of ML decoded low density parity check codes

83

Improved upper bounds on the expected error in constant step-size Q-learning

84

Improved upper bounds on the ML decoding error probability of parallel and serial concatenated turbo codes via their ensemble distance spectrum

85

Improved upper bounds on the ML performance of turbo codes for interleaved Rician fading channels, with comparison to iterative decoding

86

Improved upper bounds on the packet error probability of slotted and unslotted DS/SS systems

87

Improved upper bounds on the performance of parallel and serial concatenated turbo codes via their ensemble distance spectrum

88

Improved Upper Bounds on the Reliability Function of the Gaussian Channel

89

Improved Upper Bounds on the Reliability Function of the Gaussian Channel

90

Improved Upper Bounds to the Causal Quadratic Rate-Distortion Function for Gaussian Stationary Sources

91

Improved upper bounds to the causal quadratic rate-distortion function for Gaussian stationary sources

92

Improved U-S OFDM for fiber nonlinearity mitigation in long haul transmission

93

Improved usage of time slots of the IEEE 802.15.4a UWB system model

94

Improved Use of Foot Force Sensors and Mobile Phone GPS for Mobility Activity Recognition

95

Improved use of rare Earth permanent magnet materials and reduction of torque pulsation in interior permanent magnet machines

96

Improved use of the carry-save representation for the synthesis of complex arithmetic circuits

97

Improved user authentication in Wireless Sensor Networks

98

Improved user efficient blind signatures

99

Improved User Identity Confidentiality for UMTS Mobile Networks

100

Improved user mobility management scheme for supporting fast data transmission

101

Improved user RTSE experience on the web through fast retrieval of social media content

102

Improved User Scheduling Algorithms for Codebook Based MIMO Precoding Schemes

103

Improved User-Specific Channel Estimation Using Geodesical Interpolation at the Transmitter

104

Improved U-shaped stub rectangular slot antenna with tuning pad for UWB applications

105

Improved utilisation and energy performance of a mine cooling system through the control of auxiliary systems

106

Improved utilisation in IP networks using multiple path routing

107

Improved utilisation of an HF transformer in DC-AC application

108

Improved utility of microwave energy for semiconductor plasma processing through RF system stability analysis

109

Improved utility-based radio resource allocation in OFDMA systems with mixed traffics

110

Improved utilization of grid connected voltage source converters in smart grid through local VAR compensation

111

Improved Utilization of NoC Channel Bandwidth by Switch Replication for Cost-Effective Multi-processor Systems-on-Chip

112

Improved UWB localization technique for precision automobile parking system

113

Improved UWB pulse shaping method based on Gaussian derivatives

114

Improved Vacuum Surface Flashover Performance Of Polymer Insulators By The Use Of Unique Triple Junction Designs

115

Improved vacuum thermocouples

116

Improved validation index for fuzzy clustering

117

Improved value of the fine structure constant obtained from the electron g-2

118

Improved variable capacitance device and its applications to resonant converters

119

Improved variable EWMA controller design

120

Improved Variable EWMA Controller for General ARIMA Processes

121

Improved variable forgetting factor recursive least square algorithm

122

Improved Variable Index constant false alarm rate radar processors

123

Improved variable ordering of BDDs with novel genetic algorithm

124

Improved Variable Precision Rough Set Model and its Application to Distance Learning

125

Improved variable speed sensorless servo system by disturbance observer

126

Improved variable step size (IVSS) LMS for active noise control system

127

Improved variable universe fuzzy PID application in beer fermentation process

128

Improved variable-fidelity optimization algorithm for simulation-driven design of antennas

129

Improved Variance Estimates of FRF Measurements in the Presence of Nonlinear Distortions Via Overlap

130

Improved variant of CTP for enhanced data delivery ratio and reduced computation overhead

131

Improved variational analysis of inhomogeneous optical waveguides using Airy functions

132

Improved Variational Denoising of Flow Fields with Application to Phase-Contrast MRI Data

133

Improved variational inference for tracking in clutter

134

Improved variational wave function for triangular quantum wells and its effect on the scattering rate

135

Improved variations relating the Ziv-Lempel and Welch-type algorithms for sequential data compression

136

Improved varied density based spatial clustering algorithm with noise

137

Improved V-band four-way power divider/combiner

138

Improved VBIC model for SiGe HBTs with an unified model of heterojunction barrier effects

139

Improved V-BLAST based MIMO-OFDM Systems using Transmit and Receive Eigen-Beamformers

140

Improved V-BLAST receiver for uplink CDM-OFDMA

141

Improved V-BLAST symbol detection using short block codes

142

Improved V-BLAST system with antenna grouping

143

Improved VC merging in the ATM edge LSRs

144

Improved VC-based signal denoising

145

Improved VC-merging for multiway communications in ATM networks

146

Improved VC-merging method in MPLS networks

147

Improved VCP: Fast convergence to max-min fair bandwidth allocation

148

Improved VCSEL structures for 10 gigabit-Ethernet and next generation optical-integrated PC-boards

149

Improved vector compaction for power estimation with multi-sequence sampling technique

150

Improved vector control of an induction motor with on-line tuning of its parameters

151

Improved vector control of DFIG based wind turbine during grid dips and swells

152

Improved vector control of dual mechanical port machine for hybrid electric vehicle

153

Improved vector control of induction motor drives using genetic algorithms-based machine and control parameters estimation

154

Improved Vector Evaluated Genetic Algorithm with Archive for Solving Multiobjective PPS Problem

155

Improved Vector Perturbation with Modulo Loss Reduction for Multiuser Downlink Systems

156

Improved Vector Play Model and Parameter Identification for Magnetic Hysteresis Materials

157

Improved vector quantization for lossless compression of AVIRIS images

158

Improved Vector Route Algorithm Bases on Raster Topological Space Model

159

Improved vector velocity estimation using Directional Transverse Oscillation

160

Improved vectorial finite-element BPM analysis for transverse anisotropic media

161

Improved vehicle based multibeam bathymetry using sub-maps and SLAM

162

Improved Vehicle Classification in Long Traffic Video by Cooperating Tracker and Classifier Modules

163

Improved Vehicle Navigation Using Aiding with Tightly Coupled Integration

164

Improved vehicle performance using combined suspension and braking forces

165

Improved vehicle positioning for indoor navigation in parking garages through commercially available maps

166

Improved vehicle speed estimation using Gaussian mixture model and hole filling algorithm

167

Improved vein pattern extracting algorithm and its implementation

168

Improved velocity estimation for low-speed and transient regimes using low-resolution encoders

169

Improved velocity feedback for position control by using a quadratic sliding mode filter

170

Improved verification for aerospace systems

171

Improved verification methods for safeguards verifications at enrichment plants

172

Improved versatile gigahertz pulse generator

173

Improved version of a multiobjective quantum-inspired evolutionary algorithm with preference-based selection

174

Improved Version of a Polarized Beam Heterodyne Interferometer

175

Improved version of ionizer for nuclear polarized negative ion beam production

176

Improved version of surface plasma negative ion source

177

Improved version of the evanescent-wave coupler

178

Improved version of the inverse Chebyshev filter

179

Improved version of zener-diode phase-detection relay

180

Improved versions of learning vector quantization

181

Improved vertex control for time-varying and uncertain linear discrete-time systems with control and state constraints

182

Improved vertical handoff module for NS2 using IEEE 802.21 MIH for heterogeneous networks

183

Improved Vertical Isolation for Normally-Off High Voltage GaN-HFETs on n-SiC Substrates

184

Improved vertical PNP collector-base breakdown using 2D Monte-Carlo TCAD simulations

185

Improved Vertical p-Type Radio Frequency Metal-Base Transistors

186

Improved Vertical Silicon Nanowire Based Thermoelectric Power Generator With Polyimide Filling

187

Improved vertically integrated resonant tunneling diodes

188

Improved vertically stacked Si/SiGe resonant interband tunnel diode pair with small peak voltage shift and unequal peak currents

189

Improved very-high-speed packaged InGaAs PIN punch-through photodiode

190

Improved Vese-Chan Model for Fast Image Segmentation Based on Split Bregman Method

191

Improved VHDL Input for High-Level Synthesis Tool xTractor

192

Improved VHF air/ground communications system: technical tradeoffs

193

Improved VHF Filter Crystals Using Insulating Film Techniques

194

Improved VHR Urban Area Mapping Exploiting Object Boundaries

195

Improved viability of chronic neural implants using thin microelectrodes

196

Improved Vibration Performance in Passive Atomic Frequency Standards by Servo-Loop Control

197

Improved vibration sensitivity of the all quartz package surface acoustic wave resonator

198

Improved video coding with residual prediction for extended spatial scalability

199

Improved Video Compression Efficiency Through Flexible Unit Representation and Corresponding Extension of Coding Tools

200

Improved video compression for indoor video surveillance application

201

Improved Video Compression Schemes of Medical Image Sequences based on the Discrete Wavelet Transformation of Principal Textural Regions and Intelligent Restoration Techniques

202

Improved video compression technology and the emerging high efficiency video coding standard

203

Improved Video Decoding Through Synchronization Code Detection

204

Improved Video Denoising Algorithm Based on Spatial-Temporal Combination

205

Improved video processor for pyroelectric vidicon based IR camera

206

Improved Video Recording System

207

Improved Video Registration using Non-Distinctive Local Image Features

208

Improved video segmentation through robust statistics and MPEG-7 features

209

Improved video segmentation with color and depth using a stereo camera

210

Improved video vehicle detection algorithm based on virtual line

211

Improved Video Verification Method Using Digital Watermarking

212

Improved video watermarking for MPEG encoders using motion analysis

213

Improved video-based eye-gaze detection method

214

Improved video-based eye-gaze detection method

215

Improved video-based vehicle detection methodology

216

Improved view interpolation for side information in multiview distributed video coding

217

Improved view synthesis by motion warping and temporal hole filling

218

Improved view synthesis prediction using decoder-side motion derivation for multiview video coding

219

Improved View Synthesis with Depth Reliability Maps

220

Improved Viewing Zones for Projection Type Integral Imaging 3D Display Using Adaptive Liquid Crystal Prism Array

221

Improved VIIRS Day/Night Band Imagery With Near-Constant Contrast

222

Improved VIKOR Algorithm Based on AHP and Shannon Entropy in the Selection of Thermal Power Enterprise´s Coal Suppliers

223

Improved virtual build to order

224

Improved virtual cathode formation in Inertial Electrostatic Confinement

225

Improved virtual channel noise model for transform domain Wyner-Ziv video coding

226

Improved virtual flux observer based on orthogonal feedback compensation suitable for direct power control application

227

Improved virtual flux-oriented model predictive power control of grid inverters

228

Improved virtual queueing and dynamic EPD techniques for TCP over ATM

229

Improved Virtual Vector Control of Single-Phase Inverter Based on Unified Model

230

Improved virtual vector direct torque control of induction motor based on three-level NPC inverter

231

Improved Visibility in One-to-Many Trace Concretization

232

Improved Visibility of Monocular Head-Mounted Displays Through the Bright Control of Backlighting

233

Improved visibility of road scene images under heterogeneous fog

234

Improved Visibility of Single Hazy Images Captured in Inclement Weather Conditions

235

Improved visible light photocatalytic activity of TiO2 nano powder by Ce³⁺ doping

236

Improved Vision Based 3D Shape Measurement Method

237

Improved vision-based lane tracker performance using vehicle localization

238

Improved Visitor Pattern Base on Normal Form

239

Improved visual clustering of large multi-dimensional data sets

240

Improved Visual Design for Graphics Display

241

Improved visual localization and navigation using proprioceptive sensors

242

Improved visual odometry method for matching 3D point cloud data

243

Improved Visual Preference Authentication

244

Improved visual tracking by modified kernel smoothing with random multiplier

245

Improved visual tracking using the technique of image pyramid

246

Improved visualization [Software Reviews]

247

Improved visualization and quantification of 4D flow MRI data using divergence-freewavelet denoising

248

Improved visualization of endocardial borders with Short-Lag Spatial Coherence imaging of fundamental and harmonic ultrasound data

249

Improved visualization of fiber tracts in whole brain using illuminated line rendering

250

Improved visualization of myocardial function and morphology by 3D fusion of TL-201 stress and rest SPECT studies with biplane angiograms

251

Improved visualization of plaque in cardiac CT angiography by optimal energy weighting with photon counting detector: A simulation study

252

Improved visualization of z-pinch dynamics from inversion of streak camera data into video format

253

Improved Viterbi algorithm in continuous speech recognition

254

Improved Viterbi Algorithm-Based HMM2 for Chinese Words Segmentation

255

Improved Viterbi decoder metrics for two-stage detectors in DS-CDMA

256

Improved Viterbi-decoding performance in the presence of permanent frequency disturbances in power-line environment

257

Improved Vlasov antenna with curved cuts for high power microwaves

258

Improved VLSI circuit performance using localized power decoupling

259

Improved VLSI designs for multiplication and inversion in GF(2^M) over normal bases

260

Improved vocabulary independent search with approximate match based on Conditional Random Fields

261

Improved vocabulary-independent sub-word HMM modelling

262

Improved vocal tract model for speech synthesis

263

Improved vocal tract model for the analysis of nasal speech sounds

264

Improved vocal tract models for speech synthesis

265

Improved voice activity detection based on a smoothed statistical likelihood ratio

266

Improved Voice Activity Detection Based on Iterative Spectral Subtraction and Double Thresholds for CVR

267

Improved Voice Activity Detection based on support vector machine with high separable speech feature vectors

268

Improved voice activity detection for speech recognition system

269

Improved Voice Activity Detection Using Contextual Multiple Hypothesis Testing for Robust Speech Recognition

270

Improved voice activity detection using static harmonic features

271

Improved voice activity detection via contextual information and noise suppression

272

Improved voice identification using a nearest-neighbor distance measure

273

Improved VoIP capacity in mobile WiMAX systems using persistent resource allocation

274

Improved VoIP Design for the Advertisement Service

275

Improved voltage and reactive power distribution factors for outage studies

276

Improved voltage clamping scheme for ZVS PWM three-level converter

277

Improved voltage deviation security margin index

278

Improved voltage disturbance generator for the performance test of the custom power devices

279

Improved voltage disturbance rejection of grid-connected VSC under unbalanced voltage sag based on grid dynamic model

280

Improved voltage gain of transimpedance amplifier by AlGaAs/InGaAs doped-channel FET´s

281

Improved voltage harmonic control for sensorless shunt active power filters

282

Improved Voltage Harmonic Control for Shunt Active Power Filters Using Multiple Reference Frames

283

IMPROVED VOLTAGE HOLD-OFF CAPABILITY OF PHOTOCONDUCTIVE SILICON IN SF₆ ENVIRONMENT

284

Improved Voltage Oriented Control of AC-DC converter under balanced and unbalanced grid voltage dips

285

Improved voltage quality through advances in voltage control techniques

286

Improved voltage regulation for current source inverters

287

Improved voltage regulation for current-source inverters

288

Improved voltage regulation strategies by PV inverters in LV rural networks

289

Improved voltage response in III?V solar cells based on engineered spontaneous emission

290

Improved Voltage Selector and Cascade Multiplier Circuits

291

Improved voltage source inverter with 18-step output waveforms

292

Improved voltage tripler structure with symmetrical stacking charge pump

293

Improved voltage vector control for a stand-alone DFIG system based on predictive current regulation algorithm

294

Improved voltage-current mode feeder automation system based on GPRS

295

Improved Voltage-Vector Sequences on Dead-Beat Predictive Direct Power Control of Reversible Three-Phase Grid-Connected Voltage-Source Converters

296

Improved volume diagnosis throughput using dynamic design partitioning

297

Improved volumetric imaging for DCE-MRI using parallel imaging and dynamic compressed sensing

298

Improved Volumetric MR-HIFU Ablation by Robust Binary Feedback Control

299

Improved vortex flow meter using pre-filter

300

Improved Vowel Onset and offset points detection using bessel features

301

Improved Vt and Ioff characteristics of NMOS transistors featuring ultra-shallow junctions obtained by plasma doping (PLAD)

302

Improved Vt Stability of SNOS FETs by Oxygen Annealing

303

Improved VUI system based on maintenance device

304

Improved vulnerability testing mode based on syntax analysis and regular expressions test cases generation

305

Improved wafer-level spatial analysis for I_DDQ limit setting

306

Improved wafer-level VFTLP system and investigation of device turn-on effects

307

Improved walk-correction method for timing measurements in PET detector

308

Improved walking motion for a biped robot using piezoelectric ceramic sensors

309

Improved Wall Shear Rate method for robust measurements

310

Improved Warping of Diffusion Tensor Fields Free of Artifacts

311

Improved watchdog timer for control the IBM PC based autonomous computer systems

312

Improved watermark detection reliability using filtering before correlation

313

Improved watermark detection robust to camcorder capture based on quadrangle estimation

314

Improved Watermark Estimation Scheme Based on Neighborhood Filter

315

Improved watermark extraction for printed and scanned watermarked document

316

Improved watermark extraction using dynamic stochastic resonance

317

Improved watermark payload capacity using DE on IPCM macroblocks in H.264/AVC

318

Improved watermark robustness via spectrum equalization

319

Improved watermark sharing scheme using minimum error selection and shuffling

320

Improved watershed algorithm for dowels image segmentation

321

Improved Watershed Lips Detection and Modified H8 Tracking System Based on Lyapunov Stability Theory

322

Improved watershed segmentation algorithm for high resolution remote sensing images using texture

323

Improved Watershed Segmentation for Apple Fruit Grading

324

Improved watershed segmentation using water diffusion and local shape priors

325

Improved watershed segmentation with optimal scale based on ordered dither halftone and mutual information

326

Improved watershed transform for medical image segmentation using prior information

327

Improved wave-digital approach to numerically integrating the PDES of fluid dynamics

328

Improved waveform design for non-Gaussian target classification in cognitive radar

329

Improved waveform design for target recognition with multiple transmissions

330

Improved Waveform Estimation Procedures for Event-Related Potentials

331

Improved Waveform Quality in the Direct Torque Control of Matrix-Converter-Fed PMSM Drives

332

Improved waveform-relaxation-Newton method [MOS circuit testing]

333

Improved Waveguide Calibration of Vector Network Analyzers in WR15

334

Improved Waveguide Diode Mount Circuit Model Using Post Equivalence Factor Analysis

335

Improved waveguide filters for applications involving circular polarization

336

Improved Waveguide Filters for Radio-Relay Systems

337

Improved Waveguide Grating Router Suitable for Local Access in Optical Networks

338

Improved wavelength trimming of distributed-feedback lasers using very narrow multiple quantum wells

339

Improved wavelet based a-priori SNR estimation for speech enhancement

340

Improved wavelet based detection of power quality events in the presence of noise

341

Improved Wavelet Based Thresholding for Contrast Enhancement of Digital Mammograms

342

Improved wavelet decoding via set theoretic estimation

343

Improved Wavelet Networks Algorithm Research and its Application

344

Improved wavelet neural network for early diagnosis of cancer patients using microarray gene expression data

345

Improved wavelet pre-enhancement and hybrid model applied in speech recognition system

346

Improved wavelet threshold denoising method for MEMS gyroscope

347

Improved wavelet wiener estimator in image denoising

348

Improved wavelet-based beamformers with dynamic subband selection

349

Improved Wavelet-Based Embedded Image Coding Using a Dynamic Index Reordering Vector Quantizer

350

Improved Wavelet-Based Illumination Normalization Algorithm for Face Recognition

351

Improved wavelet-based microscope autofocusing for blood smears by using segmentation

352

Improved Wavelet-Based Online Signature Verification Scheme Considering Pen Scenario Information

353

Improved wavelet-based techniques for power quality evaluation in three-phase systems

354

Improved wavelet-based watermarking through pixel-wise masking

355

Improved Wavenumber Resolution for Small Arrays

356

Improved WBAN communication at mental healthcare system with the personalized bio signal devices

357

Improved weak labels using contextual cues for person identification in videos

358

Improved weak space object tracking assisted by strong target

359

Improved Web Content Adaptation for Visual Aspect of Mobile Services

360

Improved Web Mining for E-commerce Website Restructuring

361

Improved Web Page Watermarking

362

Improved weight assignment approach for multimodal fusion

363

Improved weight assignment for logic switching activity during at-speed test pattern generation

364

Improved Weight Clustering Algorithm for IDs in Mobile Ad Hoc Network

365

Improved Weighted Bit Flip Voting decoding algorithm for generalized LDPC

366

Improved weighted bit-flipping algorithm for decoding LDPC Codes

367

Improved Weighted code mapping for buses with non uniform data distribution

368

Improved weighted cooperative sensing algorithm based on distributed optimization in cognitive radio networks

369

Improved Weighted Fuzzy Inference and its Application in High-rise Structural Performance Evaluation

370

Improved Weighted Fuzzy Reasoning Algorithm Based on Particle Swarm Optimization

371

Improved weighted least squares algorithm for the design of quadrature mirror filters

372

Improved weighted least squares minimax design of FIR filters specified in frequency and time domain

373

Improved weighted phase averager for frequency estimation of single sinusoid in noise

374

Improved weighted point-matching technique for TM-wave scattering by dielectric cylinders

375

Improved weighted prediction based color gamut scalability in SHVC

376

Improved weighted RSS positioning algorithm for cognitive radio

377

Improved weighting algorithm for NLOS radiolocation

378

Improved weighting vector selection method in maximum ratio transmission over flat Rayleigh fading channels

379

Improved Wheeler Cap Method Based on an Equivalent High-Order Circuit Model

380

Improved whisker pointing technique for micron-size diode contact

381

Improved white organic light-emitting devices with dual-emission-layer design

382

Improved Whitening Method of Linear AR Colored Noise in Stable Distribution Environments

383

Improved wide input voltage range 1 kW solar inverter

384

Improved wide-angle finite-difference beam propagation method for the analysis of nonlinear optical waveguides

385

Improved wideband -3 dB nonuniform directional coupler

386

Improved wideband beamforming algorithm based on microphone arrays

387

Improved Wideband Blind Adaptive System Identification Using Decorrelation Filters for the Localization of Multiple Speakers

388

Improved wide-band dual-linear polarization compact microstrip antenna array for Microwave Image system

389

Improved wideband highly dispersive absorbing boundary condition

390

Improved wideband low distortion cascaded delta-sigma modulator

391

Improved wide-band Schiffman phase shifter

392

Improved wideband spectrum sensing techniques using wavelet-based edge detection for cognitive radio

393

Improved wideband time delay beam-steering

394

Improved wide-band VHF whip antenna

395

Improved wiener filter super-resolution algorithm for passive millimeter wave imaging

396

Improved WiMedia system supporting MIMO for wireless HD STB and mobile device

397

Improved wind farm’s power availability by battery energy storage systems: modeling and control

398

Improved wind power and storage system smoothing control strategy based on RE reinforcement learning and low pass filtering algorithms

399

Improved wind power conversion system using magnetic energy recovery switch (MERS)

400

Improved Wind Power Forecasting Using Combination Methods

401

Improved winding design for planar inductors

402

Improved winding loss theoratical calculation of magnetic component with air-gap

403

Improved windowing functions for Y-shaped synthetic aperture imaging radiometers

404

Improved windowing rule for input buffered packet switches

405

Improved winner-take-all neural network

406

Improved winning probability model in go based on strong group quantization and multi-level species compete-die out algorithms

407

Improved wire modelling in TLM

408

Improved wireless localization of mobile devices in smart indoor scenarios

409

Improved wireless location accuracy using antenna arrays and interference cancellation

410

Improved wireless performance from mode scattering in ventilation ducts

411

Improved wireless propagation channel estimations: some experimental results

412

Improved Wireless Secrecy Rate Using Distributed Auction Theory

413

Improved wireless sensor networks durability through efficient sink motion strategy

414

Improved Wireless Token Ring Protocol (IWTRP) for Wireless Metropolitan Area Networks

415

Improved wireless tracking using radio frequency and video sensors

416

Improved Wireless, Transcutaneous Power Transmission for In Vivo Applications

417

Improved WLS-TF algorithm for dynamic synchronized angle and frequency estimation

418

Improved WNN to Rotating Machinery Fault Diagnosis

419

Improved Wolovich algorithm for determining state-space representations of linear multivariable polynomial systems

420

Improved word alignment in patent domain

421

Improved Word Similarity Computation for Chinese Using Sub-word Information

422

Improved word-aligned binary compression for text indexing

423

Improved working efficiency of force standard machine by separating alternative weight stacks

424

Improved worst-case response-time calculations by upper-bound conditions

425

Improved woven plated-wire memory array with dummy crosspoints

426

Improved WPAN Connection Algorithm in Multi-Coordinator and Personalized Environment

427

Improved write margin 6T-SRAM for low supply voltage applications

428

Improved write margin for 90nm SOI-7T-SRAM by look-ahead dynamic threshold voltage control

429

Improved WTA problem solving method using a parallel genetic algorithm which applied the RMI initialization method

430

Improved WWW multimedia transmission performance in HTTP/TCP over ATM networks

431

Improved Wyner-Ziv video coding efficiency using bit plane prediction

432

Improved X-Band FM Discriminator (Short Paper)

433

Improved X-ray silicon detectors for medical applications

434

Improved Y factor noise measurement using the second stage contribution to advantage

435

Improved Yahalom protocol analysis theory based on ideal and honest

436

Improved YBCO coated conductors using alternate buffer architectures

437

Improved Yb-Doped Fluoride Phosphate Laser Glasses with Optimized Local Structure

438

Improved Y-domain magnetic film memory elements

439

Improved Yen-Joye´s authenticated multiple-key agreement protocol

440

Improved Y-factor method for wide-band on-wafer noise-parameter measurements

441

Improved yield and performance of ball-grid array packages: design and processing guidelines for uniform and nonuniform arrays

442

Improved yield and performance of ball-grid array packages: design and processing guidelines for uniform and non-uniform arrays

443

Improved yield and reliability in aluminum interconnects through fluorine incorporation

444

Improved Yield in Nanotechnology Circuits Using Non-square Meshes

445

Improved yield model for submicron domain

446

Improved yield models for fault-tolerant memory chips

447

Improved yield models for fault-tolerant random-access memory chips

448

Improved yield through use of a Scalable Parametric Measurement macro

449

Improved Yield Through Use of a Scalable Parametric Measurement Macro

450

Improved yields for the nano-technology era using cryogenic aerosols

451

Improved Yields of Soluble Substrates from Primary Sludge Fermentation under Alkaline Condition

452

Improved Y-junction splitter for ring waveguides

453

Improved Y-source inverter for distributed power generation

454

Improved Y-X junction laser array

455

Improved z plane polynomial interpolative analysis of switched-capacitor networks

456

Improved Z source inverter for speed control of an induction motor

457

Improved Z-bus loss allocation method through redistribution

458

Improved ZCS-PWM commutation cell for IGBTs application

459

Improved ZDN-arithmetic for fast modulo multiplication

460

Improved zero-crossing demodulator for minimum shift keying under static environments

461

Improved zero-current transition converters for high power applications

462

Improved zero-current transition converters for high-power applications

463

Improved zero-flux type large bandwidth current sensor

464

Improved zero-forcing equalizer for ISI reduction in DMT systems

465

Improved zero-IF zero-crossing demodulator for Gaussian minimum shift keying signals in land mobile channels

466

Improved Zero-Padding Method for Rapid Long PN-Code Acquisition

467

Improved zero-tree coder research based on wavelet coefficients

468

Improved zero-voltage-switching pulse width modulation full bridge converter with self-regulating auxiliary current

469

Improved zero-voltage-transition (ZVT) boost converter using coupled inductor and low-voltage Zener diode

470

Improved Zhang-Suen thinning algorithm in binary line drawing applications

471

Improved ZigBee Connection Method for Healthcare Device

472

Improved zinc oxide surge arresters using high voltage gradient 300 V/mm, 400 V/mm ZnO elements

473

Improved Ziv-Zakai lower bound for vector parameter estimation

474

Improved zonal network models in generation scheduling

475

Improved zone 2 acceleration scheme using sound phase seen impedance

476

Improved Z-Source Inverter With Reduced Z-Source Capacitor Voltage Stress and Soft-Start Capability

477

Improved ZVS DC-DC Converter With a High Voltage Gain and a Ripple-Free Input Current

478

Improved ZVT three-phase inverter with two auxiliary switches

479

Improved, Approximate, Time-Domain ML Estimators of Chirp Signal Parameters and Their Performance Analysis

480

Improved, low-profile antenna for switched-beam and energy density diversity schemes

481

Improved, operationally-passive interferometric demodulation method using 3×3 coupler

482

Improved, user-friendly initialization for the identification of the nonlinear LFR block-oriented model

483

Improved-Accuracy Source Reconstruction on Arbitrary 3-D Surfaces

484

Improved-AntNet: ACO Routing Algorithm in Practice

485

Improved-Booth encoding for low-power multipliers

486

Improved-dynamic-range single-mode OTDR at 1.3 Â¿m

487

Improved-mosquitoes-behaviour based (I-MOX) evolutionary algorithm in transmission network expansion planning

488

Improved-performance ´randomised´ Hough transform

489

Improved-performance noncoherent weighted-coefficients diversity combiner for DPSK and NC-FSK signals in nonidentical Nakagami fading channels

490

Improved-performance, InGaAs/InGaAsP (λ=980 nm) asymmetric broad-waveguide diode lasers via waveguide-core doping

491

Improved-Power-Quality Bridgeless-Converter-Based Multiple-Output SMPS

492

Improved-Quality Real-Time Stereo Vision Processor

493

Improved-Resolution X-ray Array Detector Applied for SART Fanbeam

494

Improved-throughput networks of basic on-line arithmetic modules for DSP applications

495

Improveing depth estimation through fusion of stereo and TOF

496

Improvement & realization of the A/C sampling accuracy of the remote terminal unit

497

Improvement 3-D Reconstruction Accuracy Considering Distortion in Stereovision Using a Set of Linear Spatial Filters

498

Improvement A5/1 encryption algorithm based on sponge techniques

499

Improvement accuracy in measurement of long baseline DGPS

500

Improvement against Noises in Self-Organizing Logic Circuit

501

Improvement algorithm for the transmission voice efficiency in dispatch communication system

502

Improvement algorithm of DTW on isolated-word recognition

503

Improvement algorithm of reducing the calculation error of reservoir flood dispatching

504

Improvement Algorithms for Semijoin Query Processing Programs in Distributed Database Systems

505

Improvement and analysis of GA on finding QoS routing

506

Improvement and Analysis of Iterative Decision- Feedback Differential Demodulation

507

Improvement and Analysis of Multipath Routing Protocol AOMDV Based on CMMBCR

508

Improvement and Analysis of Speed Control of Three Phase Induction Motor Drive including Two Methods

509

Improvement and Application of a Real-timing Analog Circuit Fault Diagnosis Method

510

Improvement and application of Automatic Gauge Control system in hot strip rolling mills

511

Improvement and application of dynamic thermal circuit model for oil-immersed power transformer

512

Improvement and application of GM(1,1) model

513

Improvement and Application of Grey Modeling Method in Decreasing Sequence

514

Improvement and application of grey prediction model for road traffic accident

515

Improvement and application of harmony search algorithm

516

Improvement and Application of HAZOP Analysis for Batch Process with SDG

517

Improvement and application of LEACH Protocol based on Genetic Algorithm for WSN

518

Improvement and AppLication of MKSVM

519

Improvement and Application of Quality Profit Analysis Model

520

Improvement and Application of Simulated Annealing in Optimization of Thermal Control Systems of Power Plants

521

Improvement and application of template method in fuzzy pattern recognition

522

Improvement and Application of TF•IDF Method Based on Text Classification

523

Improvement and Application of the Conifer Forest Multiangular Hybrid GORT Model MGeoSAIL

524

Improvement and application of the Delphi method

525

Improvement and application of the INTELSAT (SS)TDMA system

526

Improvement and application of the orientational filter for texture image analysis

527

Improvement and application of the orientational filter for texture image analysis

528

Improvement and Application of the Viscous-Type Frequency-Dependent Preisach Model

529

Improvement and Application to Dilution Ratio Calculating Method

530

Improvement and Assessment of the Geometric Accuracy of Chinese High-Resolution Optical Satellites

531

Improvement and comparison of a dynamic tide model in the Elbe Estuary with ERS-2 satellite data

532

Improvement and comparison of efficiency and low cost drive system based on DTC and DTC-SVM

533

Improvement and comparison of Modulus Algorithm Blind Equalizer learning curve in time and frequency domain

534

Improvement and comparison of three phonemic segmentation methods of speech

535

Improvement and Design 1R PoRAM with Read/Write/Erase Operation

536

Improvement and Evaluation of a Method to Manage Multiple Types of Logs

537

Improvement and evaluation of bearing stiffness in high T_c superconducting magnetic bearing

538

Improvement and evaluation of intellectual productivity model based on work state transition

539

Improvement and evaluation of learning organization

540

Improvement and Evaluation of SPH on High Dimensional Vector for Geographical Origin Identification System for Vegetables by Trace Elements

541

Improvement and Evaluation of the MS2SV for Mixed Systems Design Described in Abstraction High Level

542

Improvement and evaluation of the wireless ad hoc network protocol FORP for inter-vehicle communications

543

Improvement and evaluation of visual saliency based on information theory

544

Improvement and experiment on Grid-oriented map display service

545

Improvement and Implement of Communication Schedule Algorithm Base on EPA

546

Improvement and implement of map matching algorithm based on C-measure

547

Improvement and implementation of BM algorithm for increasing decoding speed of satellite receivers

548

Improvement and implementation of displacement measurement algorithm based on FPGA

549

Improvement and implementation of evolution immune algorithm in neural

550

Improvement and Implementation of IDMEF Data Model

551

Improvement and implementation of keyword programming

552

Improvement and Implementation of PNLMS Algorithms Based on DSP

553

Improvement and Implementation of RBAC Access Control Model

554

Improvement and implementation of RPL routing protocol in wireless sensor networks

555

Improvement and Implementation on UMHexagonS Algorithm in H.264 Reference Software

556

Improvement and invariance analysis of Zernike moments

557

Improvement and invariance analysis of Zernike moments using as a region-based shape descriptor

558

Improvement and ISO9001 certification in BVR

559

Improvement and its Evaluation of Worker´s Motion Monitor System in Automobile Assembly Factory

560

Improvement and management of power system stability in China

561

Improvement and Metrological Validation of TDR Methods for the Estimation of Static Electrical Conductivity

562

Improvement and optimization of a fuzzy C-means clustering algorithm

563

Improvement and optimization of spam text filtering system

564

Improvement and optimization of Thiessen polygon method boundary treatment program

565

Improvement and parallel implementation of canny edge detection algorithm based on GPU

566

Improvement and Performance Analysis of a Scheme for the Maximum Doppler Frequency Estimation

567

Improvement and performance analysis on statistical selection algorithms

568

Improvement and Performance Evaluation of CAVENET: A Network Simulation Tool for Vehicular Networks

569

Improvement and prediction of open-loop starting/stopping rates of stepping motors

570

Improvement and quantitative performance estimation of the back support muscle suit

571

Improvement and realization of association rules mining algorithm based on FP-tree

572

Improvement and Realization of Dijkstra Algorithm in GIS of Depot

573

Improvement and Realization of the Fire Recognition System

574

Improvement and realization on the algorithm of adjustment of traverse network

575

Improvement and Research of FP-Growth Algorithm Based on Distributed Spark

576

Improvement and research on Aprioriall algorithm of sequential patterns mining

577

Improvement and restoration of biomedical images blurred by body movement

578

Improvement and sea test of Autonomous Underwater Vehicle “URASHIMA” for practical use

579

Improvement and Sensitivity Analysis of Thermal Thin-Ice Thickness Retrievals

580

Improvement and Simulation for a Localization Based on APIT

581

Improvement and simulation for the ACELP speech encoding algorithm

582

Improvement and simulation of clustering routing algorithm in wireless sensor network

583

Improvement and Simulation of Temperature Parameter Identification

584

Improvement and simulation study on turbocharged diesel generator set under pulsed load

585

Improvement and Solving Three New Supply Chain Inventory Control Models for Perishable Items Using Just-in-Time Logistic

586

Improvement and synthesis techniques for low-noise Current Steering Logic (CSL)

587

Improvement and testing of a robotic manta ray (RoMan-III)

588

Improvement and validation of a propeller slipstream model for small unmanned aerial vehicles

589

Improvement and validation of an iron loss model for synchronous machine

590

Improvement and validation of design tools for antennas of space instruments working in terahertz frequency range

591

Improvement and validation of design tools for MM-wave instrument antennas by advanced measurement techniques

592

Improvement and validation of MODIS performance in automated detection and extent estimate of wildfires

593

Improvement Approach of IPTV Bearer Network

594

Improvement Based on Data Version Management in TM

595

Improvement based on DV-Hop localization algorithm of wireless sensor network

596

Improvement behavior and chaos control of Ćuk converter in current mode controlled

597

Improvement by sorting and thresholding in PCA based nearest neighbor search

598

Improvement DACS3 searching performance using local search

599

Improvement delay and capacity (throughput) in Mobile Ad Hoc Networks using a new routing algorithm

600

Improvement design based on cloud security method of Trend and Rising

601

Improvement design of fuzzy geo-demographic clustering using Artificial Bee Colony optimization

602

Improvement design of lithium battery explosion-proof equipment based on TRIZ and AFD

603

Improvement Design of the Auto-Body Oriented to the Virtual Reconstruction Results of the Traffic Accident

604

Improvement Design Research of Reflective Raised Pavement Marker

605

Improvement due to optically filtered lasers in parallel decision-directed phase recovery for 16-QAM

606

Improvement Dynamic Continuum Model for Pedestrian Flow

607

Improvement Effect of Electrical Properties in Post-Annealed Wafer-Bonded Ge(001)-OI Substrate

608

Improvement Effect of Input Current Waveform of a Soft Switching Boost Type Three-Phase Diode Rectifier

609

Improvement energy efficiency of district heating systems

610

Improvement eye diagram opening by base band pre-distortion over nonlinear channel in DVB-RCS transmitter

611

Improvement factor for limited coherent MTI

612

Improvement factor for real sea-clutter Doppler frequency spectra

613

Improvement Factor of a Nonlinear MTI in Point Clutter

614

Improvement factor of a recursive MTI radar filter

615

Improvement Factor of the Phase-Sensitive Noncoherent MTI

616

Improvement flexibility of SLAM in unknown environment based on Robot Technology Middleware

617

Improvement fluorescence of Cr⁴⁺(Td)/Cr⁴⁺(Oh) in Cr-doped YAG crystalline fibers

618

Improvement for 3D Coordinate Reconstruction of Facial Feature Points in Video Sequences

619

Improvement for action strategy learning in classification task using classification probalilities

620

Improvement for anytime systems with modular architecture

621

Improvement for AODV Based on Backup Path Strategy

622

Improvement for bond pads discolor (sic) of CMOS image sensor products

623

Improvement for characterizing micro-ring resonator by low coherence interferometry measurement

624

Improvement for Congestion Control Algorithms under DDoS Attacks

625

Improvement for consensus performance of fractional-order systems with communication delays

626

Improvement for Consensus Performance of Multi-Agent Systems Based on Weighted Average Prediction

627

Improvement for diagnosing internal abnormalities in oil-filled transformers

628

Improvement for distinguisher efficiency of the 3-round Feistel network and a random permutation

629

Improvement for electrical transients of safety bus using high speed power transfer scheme in nuclear power plants

630

Improvement for EMF and efficiency used fractional slot winding of Permanent Magnet Type Synchronous Generator for Wind Power

631

Improvement for EMF wave form used Fractional Slot Winding of Permanent Magnet Type Synchronous Machine

632

Improvement for estimating hourly incident solar radiation from GMS S-VISSR image data

633

Improvement for high-efficiency, stable multi-junction cells

634

Improvement for lower hybrid coupler with step transformers and power dividers

635

Improvement for Nonnegative PCA Algorithm for Independent Component Analysis

636

Improvement for planar bus bars of high power inverters based on segmented evaluation of stray parameters

637

Improvement for Rate-Based Protocols in Multihop Wireless Networks

638

Improvement for real-time performance in Bluetooth Home Control Network

639

Improvement for scattering by a thin dielectric sheet using surface integral equation

640

Improvement for solving the mix-up problem in constant modulus arrays

641

Improvement for split multipath routing protocol in Ad Hoc network

642

Improvement for the automatic part-of-speech tagging based on hidden Markov model

643

Improvement for the B-CDMA PCS links in an urban environment by using a directional antenna at the mobile terminal

644

Improvement for the closed-loop control of shunt Active Power Filter

645

Improvement for the design equations for tapered Microstrip-to-Substrate Integrated Waveguide transitions

646

Improvement for the Rao-Blackwellized Particle Filters SLAM with MCMC Resampling

647

Improvement for the surface damage resistance of Nd-doped phosphate glass

648

Improvement for traditional PERT based on rational risk aversion

649

Improvement for very high efficiency chopper circuit SAZZ

650

Improvement for vTPM Access Control on Xen

651

Improvement Fourth Generation (4G) Using Channel Shortening Method

652

Improvement generating powers quality of a doubly-fed induction generator with a second-order LC filter in the rotor circuit

653

Improvement GPS time link in Asia with all in view

654

Improvement heuristic for solving the one-dimensional bin-packing problem

655

Improvement in $\\hbox {NO}_{\\rm x}$ Removal Performance of the Pilot-Scale Boiler Emission Control System Using an Indirect Plasma–Chemical Process

656

Improvement in 1985-1993 NDVI time-series for world desert targets using post-launch calibration

657

Improvement in 77-GHz Radar Cross Section of Road Work Jacket and Side Screen by Use of Planar Flexible Retrodirective Reflectors

658

Improvement in 80 Ni Permalloys through solid state refining

659

Improvement in a heuristic UTD diffraction coefficient for prediction of radio wave propagation

660

Improvement in a Hydrogen Maser by a New State Selection

661

Improvement in a performance-adaptive control system for a weigh feeder

662

Improvement in A.C. dielectric breakdown strength of XLPE power cables through diffusing of an additive into the insulation

663

Improvement in ability of wafer-formed cleaning material "Cleaning Wafer" to remove small particles

664

Improvement in accuracy of a single ⁴⁰Ca⁺ optical clock towards the 10⁻¹⁵ level using a magnetic shield

665

Improvement in accuracy of finite modeling for ultrasonic transducers

666

Improvement in Accuracy of ISAR Image Formation Using the Shooting and Bouncing Ray

667

Improvement in ACLR asymmetry for W-CDMA InGaP/GaAs HBT power amplifier

668

Improvement in active interference cancellation technique using guard carriers in MB-OFDM UWB system

669

Improvement in Al-Alloyed emitter of rear-junction n-type mc-si cells using a stack of pure Al and screen-printed Al paste

670

Improvement In AlGaAs/GaAs HBT power gains with buried proton-implanted layer

671

Improvement in ammonia sensing characteristics of titanium dioxide(TiO2) thin film by palladium(Pd) doping

672

Improvement in an interpolation algorithm concerning multiple factors to predict drift distance

673

Improvement in angle determination precision and resolution with method of deconvolution by coherent techniques

674

Improvement in antenna factor measurements using time-domain gating

675

Improvement in Arteral Oxygen Control Using Multiple-Model Adaptive Control Procedures

676

Improvement in Arterial Oxygen Control using Multiple Model Adaptive Control Procedures

677

Improvement in automatic classification of Persian documents by means of Naïve Bayes and Representative Vector

678

Improvement In Automatic Speech Recognition Performance In Noisy Environments Using Time-Domain Blind Source Separation

679

Improvement in bandwidth efficiency of asynchronous prime-code CDMA networks by error correction coding

680

Improvement in bandwidth using multidielectric patch antenna

681

Improvement in bit-error rate for optoelectronic multicomputer interconnection networks using cyclic redundancy code error detection

682

Improvement in broadcasting coverage by installation characteristics

683

Improvement in cable rating calculations by consideration of dependence of losses on temperature

684

Improvement in calculation of some surface integrals: application to junction characterization in cavity filter design

685

Improvement in calculation of some surface integrals: application to junction characterization in cavity filter design

686

Improvement in calculation of the self- and mutual inductance of thin-wall solenoids and disk coils

687

Improvement in calibration algorithm of the AOS (acousto-optical spectrometer) using in-orbit measurement data

688

Improvement in camera calibration based on RAC

689

Improvement in C-Arm Acquired DSA Image Quality via Combined Effect of Inverse Consistent Motion Correction and Nonlinear Normalization

690

Improvement in Characteristic Variability of TFTs Using Grain Growth Control by Micro Thermal Plasma Jet Irradiation on a-Si Strips

691

Improvement in coercivity by high-speed crystallization for PrFeB magnets

692

Improvement in coercivity by high-speed crystallization for PrFeB-Based nanocomposite magnets

693

Improvement in color kinescopes through optical analogy

694

Improvement in Computational Accuracy and Convergence Characteristics by Combined Application of Various Infinite Edge Element Configurations

695

Improvement in contactless generation of ultrasound with an array of thermoelastic sources

696

Improvement in Control of the Tandem Hot Strip Mill

697

Improvement in control of the tandem hot strip mill

698

Improvement in control stability for high-efficiency electronic ballast

699

Improvement in control system for the medium frequency direct current resistance spot welding system

700

Improvement in convergence speed and stability of Least Mean Square and Normalized Least Mean Square algorithm

701

Improvement in coupling efficiency between a silicon waveguide and a surface mounted photo detector using an apodized grating coupler

702

Improvement in course curriculum for Software Project Management

703

Improvement in critical clearing time calculation by a new equation of motion in the on-fault condition

704

Improvement in crosstalk of 200-port Bragg reflector waveguides array-based wavelength selective switch

705

Improvement in Cryogenic Stability of the Model Coil of the LHD Helical Coil by Lowering the Temperature

706

Improvement in current control performance for IPMSMs in the inverter over-modulation range considering voltage saturation

707

Improvement in dark current characteristics and long-term stability of mesa InGaAs/InP p-i-n photodiodes with two-step SiN/sub x/ surface passivation

708

Improvement in DC Motor Performance by Asymmetrical Triggering, Part I: One-Quadrant Drive

709

Improvement in decimation of triangle meshes for level of detail

710

Improvement in Deposition Rate and Quality of Films Prepared by "Thin Liquid-Film" Ferrite Plating Method

711

Improvement in Detectability of Alarm Signals in Noisy Environments by Utilizing Spatial Cues

712

Improvement in Device Performance of a-InGaZnO Transistors by Introduction of Ca-Doped Cu Source/Drain Electrode

713

Improvement in Dielectric and Tunable Properties of Fe-Doped Ba0.6Sr0.4TiO3 Thin Films Grown by Pulsed Laser Deposition

714

Improvement in dielectric and tunable properties of Fe-doped Ba_0.6Sr_0.4TiO₃ thin films grown by pulsed-laser deposition

715

Improvement in dielectric measurement technique of open-ended coaxial line resonator method

716

Improvement in dielectric properties of bilayer ZnO/MgO films deposited by Sol-Gel technique

717

Improvement in digital control electronic for CCC Resistance Bridge with sinusoidal biasing currents

718

Improvement in dissolution contrast of positive-tone photo-definable poly(benzoxazole) materials

719

Improvement in distribution methods

720

Improvement in distribution methods

721

Improvement in Distribution Methods

722

Improvement in DPCM image compression technique

723

Improvement in drop shock reliability of Sn-1.2Ag-0.5Cu BGA interconnects by Ni addition

724

Improvement in durability of CoCr film with carbon protective layer

725

Improvement in dynamic equalization performance of a coherent receiver by CMA gain adaptation

726

Improvement in dynamic stability of self-excited induction generator with short-shunt capacitors

727

Improvement in efficiency bandwidth product of UHF antenna on truncated ground plane

728

Improvement in efficiency droop of GaN-based light-emitting diodes by optimization of active regions

729

Improvement in efficiency of a Gunn-effect oscillator with change of geometry

730

Improvement in efficiency of LED lighting system

731

Improvement in Efficiency of the Phase-shift Current-doubler-rectification ZVS Full-bridge DC-DC Converter

732

Improvement in Efficiency of Wireless Power Transfer of Magnetic Resonant Coupling Using Magnetoplated Wire

733

Improvement in efficiency-bandwidth product in small dielectric loaded antennas

734

Improvement in EIT image reconstruction by using double FEM mesh

735

Improvement in EIT image reconstruction using genetic algorithm

736

Improvement in elastograms using multiresolution elastography

737

Improvement in elecrical properties in SAB-based n+-Si/n-4H-SiC junctions by annealing

738

Improvement in Electrical and Optical Performances of GaN-Based LED With $\\hbox {SiO}_{2}/\\hbox {Al}_{2}\\hbox {O}_{3}$ Double Dielectric Stack Layer

739

Improvement in electrical characteristics of ultrathin thermally grown SiO₂ by selective anodic oxidation

740

Improvement in electrical insulators by nonlinear fillers

741

Improvement in electrical properties of CVD graphene on low temperature pulsed laser deposited boron nitride on SiO2/Si substrate

742

Improvement in electrical properties of PbZr/sub 0.4/Ti/sub 0.6/O/sub 3/ thin films using PbTiO/sub 3/ seeding layer

743

Improvement in electrical properties of SIMOX by high-temperature oxidation

744

Improvement in electricity distribution efficiency to mitigate pollution IEEE ISEE (May 2008)

745

Improvement in electron emission from CNT cathodes after Ar plasma treatment

746

Improvement in Electron Overflow of Near-Ultraviolet InGaN LEDs by Specific Design on Last Barrier

747

Improvement in electrostatic-discharge tolerance of 1.3µm AlGaInAs/InP buried heterostructure laser diodes

748

Improvement in encrustation removal from artworks using multi pulse Q-switch laser

749

Improvement in Energy Efficiency of Induction Motors by Means of Voltage Control

750

Improvement in error resilience for compressed VLSI test data using Hamming code based technique

751

Improvement in Estimating Snowpack Properties with SSM/I Data and Land Cover Using Artificial Neural Networks

752

Improvement in estimation accuracy of a sound source direction by a frequency domain binaural model with information on listener´s head movement in a conversation

753

Improvement in estimation of time of arrival (TOA) from timing advance (TA)

754

Improvement in Extension of Ant Colony Optimization and its appliance

755

Improvement in extinction ratio of silicon-silica hybrid thermooptic switch by using UV laser trimming technique

756

Improvement in fatigue properties of ferroelectric Bi₄Ti ₃O₁₂ thin films by heat treatment in O₂ gas at high pressure

757

Improvement in Field-Effect Mobility of Indium Zinc Oxide Transistor by Titanium Metal Reaction Method

758

Improvement in finite wordlength FIR digital filter design by cascading

759

Improvement in fire safety features of electrical conductors and cables

760

Improvement in fire safety features of electrical conductors and cables

761

Improvement in fire safety features of electrical conductors and cables

762

Improvement in fluorescence confocal microscopy for obtaining better depth perception

763

Improvement in Fold Recognition Accuracy of a Reduced-State-Space Hidden Markov Model by using Secondary Structure Information in Scoring

764

Improvement in force control with force projection for 2-DOF tendon-driven spherical joint mechanisms

765

Improvement in front-to-back ratio of a bifilar backfire helix by a flared open end

766

Improvement in GaAs MESFET drain conductance by a steplike-gate structure

767

Improvement in GaAs MESFET performance due to piezoelectric effect

768

Improvement in Gain Margin for a Dual-Rate System

769

Improvement in Gain Stability of the Superheterodyne Mixer Through the Application of Negative Feedback

770

Improvement in gate breakdown voltage for SOS devices

771

Improvement in Giant Magnetoimpedance by High Ion Dose

772

Improvement in hard magnetic properties of FePt films by introduction of Ti underlayer

773

Improvement in heat dissipation by transfer of IV-VI epilayers from silicon to copper

774

Improvement in hemiplegic gait with multichannel, implanted electrical stimulation

775

Improvement in heuristic UTD diffraction coefficient

776

Improvement in High- $k$ $(\\hbox {HfO}_{2/}\\hbox {SiO}_{2)}$ Reliability by Incorporation of Fluorine

777

Improvement in high frequency and noise characteristics of InP-based HEMTs by reducing parasitic capacitance

778

Improvement in high-k (HfO/sub 2//SiO/sub 2/) reliability by incorporation of fluorine

779

Improvement in high-resolution ECG analysis by interpolation before time alignment

780

Improvement in high-temperature dielectric properties of epoxy resin by abundant addition of micro-silica

781

Improvement in hot carrier lifetime as a function of N/sub 2/ ion implantation before gate oxide growth in deep submicron NMOS devices

782

Improvement in Humidity Profile Retrieval for Hyperspectral Sounder Using Principal Component-Based Regression Algorithm

783

Improvement in image retrieval performance of vocabulary tree by adding index storage array and multiple search algorithm

784

Improvement in implementation of fuzzy decision making in determining the severity of respiratory distress

785

Improvement in inertial seismographs

786

Improvement in in-plane localization precision of nanoparticles using interference analysis

787

Improvement in input current waveform of high efficiency AC-AC converter for online UPS

788

Improvement in interference rejection capability using space-time turbo code and adaptive beamforming for MIMO-OFDM system

789

Improvement in Intrusion Detection With Advances in Sensor Fusion

790

Improvement In Jitter Characteristics In Mark Edge Recording For Phase Change Media

791

Improvement in k-Means Clustering Algorithm Using Data Clustering

792

Improvement in lateral IGBT design for 500 V 3 A one chip inverter ICs

793

Improvement in LEACH protocol for large-scale wireless sensor networks

794

Improvement in leakage characteristics of Ge-on-Si photodetectors

795

Improvement in lifetime of color DC PDP

796

Improvement in light emission of Si nanocrystal LED using surface plasmons

797

Improvement in light-output efficiency of AlGaInP LEDs fabricated on stripe patterned epitaxy

798

Improvement in light-output efficiency of Near-Ultraviolet InGaN-GaN LEDs Fabricated on Stripe Patterned Sapphire Substrate

799

Improvement in listening capability for humanoid robot HRP-2

800

Improvement in luminescence properties of TlInGaAsN/TlInP multi-layers grown by gas source molecular beam epitaxy

801

Improvement in Luminosity, Background and Chamber Protection with Beam Scrapers in the ISR

802

Improvement in magnetic properties of (Sm,Pr)Co_4.6 alloys by a CCIA treatment

803

Improvement in Magnetic Properties of PLD-Made Nd-Fe-B Thick Film Magnets

804

Improvement in magnetic properties of Sm-Fe-N flakes by annealing under Zn vapor

805

Improvement in magnetic shielding by the superposition of a magnetic cylinder over a copper-oxide superconducting cylinder

806

Improvement in magneto-optical properties of Bi-YIG particulate films by reduction in particle size

807

Improvement in maintenance and inspection of transformers in Japan

808

Improvement in Mechanical Support Structure of a High Field ${\\rm Nb}_{3}{\\hbox {Al}}$ Common Coil Magnet

809

Improvement in microwave generation using optical difference frequency mixing

810

Improvement in Minutiae Detection by Single Ridge Local Analysis for Fingerprint Image Processing

811

Improvement in Modeling and Testing of Induction Motors

812

Improvement in Modeling and Testing of Induction Motors

813

Improvement in modeling of Walking Assist Machine Using Crutches for dynamic analysis

814

Improvement in modern meter-testing technique

815

Improvement in Modern Mete-Testing Technique

816

Improvement in moisture resistance of thin SiP utilizing the plasma treatment of resin surface

817

Improvement in morphology of nickel silicide film with carbon

818

Improvement in MOS reliability by oxidation in ozone

819

Improvement in motion correction technique for microPET brain imaging

820

Improvement in multiple access channel allocation for sensor node configuration based on RFID communication

821

Improvement in mutual interaction between robot and person for attachment behavior of robot

822

Improvement in N-best search for continuous speech recognition

823

Improvement in NBTI by catalytic-CVD silicon nitride for hp-65nm technology

824

Improvement in negative-bias-illumination-stress stability of fully-transparent double-gate a-IGZO thin-film transistors

825

Improvement In NOAA-AVHRR Snowcover Determination For Runoff Prediction

826

Improvement in noise figure of wide-gate-head InP-based HEMTs with cavity structure

827

Improvement in Noise Performance and Transconductance Using Positive Feedback in Bulk Driven Operational Amplifier

828

Improvement in non-Gaussian jammers rejection with a non-linear spatial filter

829

Improvement in nonlinear characteristics of zero bias GaAsSb-based backward diodes

830

Improvement in non-linear guitar loudspeaker sound reproduction

831

Improvement in norm-reducing Newton methods for circuit simulation

832

Improvement in off-axis neuromuscular control through pivoting elliptical training: Implication for knee injury prevention

833

Improvement in off-State Leakage Current of n-Channel SOS MOSFETs by Hydrogen Annealing of the SOS Film

834

Improvement in on-resistance of a high-purity channel sit by a shielded gate structure

835

Improvement in open-resonator permittivity measurement

836

Improvement in operation lives of GaAlAs visible lasers by introducing GaAlAs buffer layers

837

Improvement in optic target detection and reaction time by acoustic stimulation: comparison between elderly and young

838

Improvement in optical performance of white light-emitting diodes using randomly textured phosphor-in-glass

839

Improvement in Outcoupling Efficiency and Image Blur of Organic Light-Emitting Diodes by Using Imprinted Microlens Arrays

840

Improvement in outdoor sound source detection using a quadrotor-embedded microphone array

841

Improvement in oxide thickness uniformity by repeated spike oxidation

842

Improvement in ozone generation with low voltage high frequency power converters

843

Improvement in packet-reordering with limited re-sequencing buffers: An analysis

844

Improvement in palmprint recognition rate using fusion of multispectral palmprint images

845

Improvement in passive arc flash protection through limiting arcing duration

846

Improvement in PCA Performance Using FLD and RBF Neural Networks for Face Recognition

847

Improvement in performance and degradation characteristics of MOSFETs with thin gate oxides grown at high temperature

848

Improvement in Performance of GMRES(m) Method by Applying a Genetic Algorithm to the Restart Process

849

Improvement in performance of long haul EDFA link using high frequency polarisation modulation

850

Improvement in Performance of Short Chorded Three-Phase Induction Motors with Variable in PWM Switching Frequency

851

Improvement in Performance of Short Chorded Three-Phase Induction Motors With Variable PWM Switching Frequency

852

Improvement in performance of solution processed indium-zinc-tin oxide thin film transistors by using UV Ozone treatment on zirconium oxide gate insulator

853

Improvement in Performance of Tamil Phoneme Recognition using Variable Length and Hybrid Language Models

854

Improvement in Photo-Bias Stability of High-Mobility Indium Zinc Oxide Thin-Film Transistors by Oxygen High-Pressure Annealing

855

Improvement in power durability of SAW filters

856

Improvement in power quality and a simple method of subharmonic suppression for a cycloconverter-fed synchronous motor drive

857

Improvement in power quality using Fryze conductance algorithm controlled grid connected solar PV system

858

Improvement in power system voltage control and power transfer capabilities using enhanced generator excitation control

859

Improvement in power updating algorithm in wireless DS-CDMA networks

860

Improvement in Power-Handling Capability of Superconducting Filters Using Multi-Layered Microstrip Line Resonators

861

Improvement in precise estimation of the pressure distortion coefficient for controlled-clearance piston-cylinders at higher pressures

862

Improvement in prediction rate and accuracy of diabetic diagnosis system using fuzzy logic hybrid combination

863

Improvement in productionrate for 3 phase energy meter terminal block by choosing an optimum gate location and reducing the defects of the tool

864

Improvement in proton beam writing at the nano scale

865

Improvement in Q with low frequency polarization modulation on transoceanic EDFA link

866

Improvement in Q-factor of AT-cut quartz crystal resonators using single walled carbon nanotubes

867

Improvement in quality of care by mobile access to always-up-to-date clinical guidelines and documentation of the decision process

868

Improvement in quality of coverage of 802.11a/b/g wireless networks

869

Improvement in quality of service through an alternative automation system design

870

Improvement in radar detection through window processing in the Hough space

871

Improvement in radiation characteristics of coaxial feeds using a quarter-wavelength choke

872

Improvement in radiation hardness of n-MOSFET´s with gate oxides prepared by multiple N₂O annealings

873

Improvement in radiation hardness of reoxidized nitrided oxide (RNO) in the absence of post-oxidation anneal

874

Improvement in radiation-hard CMOS logic gates for noise margin

875

Improvement in range segmentation parameters tuning

876

Improvement in read range of an UHF RFID newborn hospital monitoring system using meander line antennas

877

Improvement in reading precision of micro-ID engraved on wafer

878

Improvement in readout reliability of a nondestructive readout FeRAM by asymmetrical programming

879

Improvement in real-time obstacle detection system for USV

880

Improvement in recording power sensitivity for overwritable MO media by RE-rich GdNdFeCo control layer

881

Improvement in Rectangular Microstrip Patch Antenna Parameters Using Metamaterial with Active Devices

882

Improvement in Reliability and Energy Yield Prediction of Thin-Film CdS/CdTe PV Modules

883

Improvement in reliability by changing the deterministic inputs of nanoscale circuits

884

Improvement in reliability characteristics (retention and endurance) of RRAM by using high-pressure hydrogen annealing

885

Improvement in reliability of coverage using 2-hop relaying in cellular networks

886

Improvement in Reliability of Doubly Salient Permanent Magnet Motor Drive

887

Improvement in reliability of extrusion type molded joint for 275 kV XLPE cable

888

Improvement in reliability of InP-based HEMTs by suppressing impact ionization

889

Improvement in reliability of the token ring network by reversal of token in case of a single component failure

890

Improvement in Reliability of Tunneling Field-Effect Transistor With p-n-i-n Structure

891

Improvement in reliability with CCGA column density increase to 1 mm pitch

892

Improvement in reproducibility of multilayer and junction process for HTS SFQ circuits

893

Improvement in Resolution of Laser Capture Microdissection Using Near-Field Probe to Capture Nanoparticles

894

Improvement in resolution using four-wave mixing in nonlinear confocal microscopy

895

Improvement in resource reservations management within tunnels over all-IP mobile networks using IntServ6

896

Improvement in response of position estimation for IPMSMs in low-speed regions including standstill using area calculation

897

Improvement in response of swelling clad-type POF humidity sensor using a multicladding layer

898

Improvement in retention reliability of SONOS nonvolatile memory devices by two-step high temperature deuterium anneals

899

Improvement in rod-pinch diode performance with anode heating

900

Improvement in rod-pinch diode performance with anode heating

901

Improvement in rural network performance (power system security)

902

Improvement in SAR Image Classification using Adaptive Stack Filters

903

Improvement in Schottky diode characteristics of metal-In_0.52Al_0.48As contact using an in situ photochemical etching and surface passivation process

904

Improvement in Security Evaluation of Biometric Systems

905

Improvement in selectivity of NO2 sensors based on WO3 thin films with MnO2 filters deposited by radio frequency sputtering

906

Improvement in sensitivity and selectivity of InP-based gas sensors: pseudo-Schottky diodes with palladium metallizations

907

Improvement in sensitivity of broadband impedance spectroscopy for locating degradation in cable insulation by ascending the measurement frequency

908

Improvement in sensitivity of novel magnetic sensor using Y-Ba-Cu-O ceramic superconductor film

909

Improvement in service robot´s interaction through case based reasoning

910

Improvement in short circuit current of p-i-n solar cell with silicon quantum dot superlattice structure by optimizing SiNx thickness

911

Improvement in sidewall roughness of MEMS X-ray optics

912

Improvement in signal-to-noise ratio at variable random fraction in TOF PET

913

Improvement in signal-to-noise ratio of Rayleigh backscattering measurement using optical low coherence reflectometry

914

Improvement in simulation efficiency by means of the standard clock: a quantitative study

915

Improvement in solar panel efficiency using solar concentration by simple mirrors and by cooling

916

Improvement in SOVA based normalization scheme for turbo codes

917

Improvement in spacebased scatterometers and increased scientific impact in the past decade

918

Improvement in spatial queries by using fuzzy control system in spatial measurement

919

Improvement in spatial resolution of dual-ended readout of 100 mm long LYSO Crystals through use of systematic crystal surface roughing

920

Improvement in Spectral Properties of Quantization Noise of Harmonic Signal Using Multiresolution Quantization

921

Improvement in speed control of a six-phase induction motor using fuzzy control and genetic algorithm

922

Improvement in spray deposition of the intrinsic ZnO window layer for chalcopyrite solar cells

923

Improvement in spread spectrum watermarking through convolutional codes

924

Improvement in stability and convergence speed on normalized LMS algorithm

925

Improvement in stabilized efficiency of a-Si:H solar cells through optimized p/i-interface layers

926

Improvement in strength characteristics of soft marine clay by Bidirectional Dry Mixing Method

927

Improvement in surface degradation properties of polymer composites due to pre-processed nanometric alumina fillers

928

Improvement in surface morphology of InGaAsP-InP wafers by dummy layer technique

929

Improvement in switching characteristics of HTS power electric device prepared by pulsed laser deposition

930

Improvement in System Performance Using a Crystal Oscillator Compensated for Acceleration Sensitivity

931

Improvement in Target Detectability Using Spread Spectrum Radar in Dispersive Channel Condition

932

Improvement in target detection and image Formation for ISAR system using CLEAN algorithm

933

Improvement in target detection performance of pulse coded Doppler radar based on multicarrier modulation with fast Fourier transform (FFT)

934

Improvement in temperature characteristics of plate wave resonator using rotated Y-cut LiTaO3 / sin structure

935

Improvement in temperature scale realization above the copper point

936

Improvement in temperature tolerance of coaxial holographic data storage

937

Improvement in the 3-color particle image velocimetry system

938

Improvement in the 500 kV substations using barehand methods without outage of power flow in Brazil´s north-south interconnection

939

Improvement in the Accuracy of Dielectric Measurement of Open-Ended Coaxial Resonators by an Enhanced De-Embedding of the Coupling Network

940

Improvement in the accuracy of paddy field area estimation using the area ratio of each pixel derived from Landsat TM data

941

Improvement in the algorithm for accurate detection of muscle activity from EMG

942

Improvement in the calculation of electromagnetic force by the FEM

943

Improvement in the cathodoluminescence property of ZnAl2O4:Mn highly-chromatic-pure green phosphor

944

Improvement in the characteristics of GaN-based light-emitting diodes by inserting AlGaN-GaN short-period superlattices in GaN underlayers

945

Improvement in the Cohen-Sutherland line segment clipping algorithm

946

Improvement in the continuity of supply due to a large introduction of Petersen coils in HV/MV substations

947

Improvement in the Control Aspect of Laser Frequency Stabilization

948

Improvement in the control range of matrix converters

949

Improvement in the conversion efficiency of single and double junction a-Si solar cells by using high quality p-SiO:H window layer and seed layer/thin n-μc-Si:H layer

950

Improvement in the Definition of ODM for FSV

951

Improvement in the detection performance of a space based radar using a displaced phase center antenna

952

Improvement in the DOA estimation of broadband signals using partially IIR beamformers

953

Improvement in the efficiency of class-E power amplifier for RF

954

Improvement in the electric field distribution of silicone rubber composite insulators by non-linear fillers

955

Improvement in the electrical performance of dielectric space frame radomes by wire loading

956

Improvement in the electrical performance of electrical insulation by non-linear fillers

957

Improvement in the electrical properties of thin gate oxides by chemical-assisted electron stressing followed by annealing (CAESA)

958

Improvement in the electromigration lifetime using hyper-textured aluminum formed on amorphous tantalum-aluminum underlayer

959

Improvement in the energy efficiency of electric transformers and related smart practices [breaker page]

960

Improvement in the estimation of dominate wavenumber and direction from spaceborne SAR image spectra when corrected for ocean surface movement

961

Improvement in the evaluation model of water resources carrying capacity of urbanized area base on Fuzzy theory

962

Improvement in the evaluation of a rectangular waveguide microcalorimeter correction factora

963

Improvement in the Extinction Ratio of Output Optical PCM Signals From an Uncooled External Cavity Diode Laser by Using a Semiconductor Saturable Absorption Device

964

Improvement in the field-weakening performance of switched reluctance machine with continuous mode

965

Improvement in the fun of the board game by A.R. introduction (In the case of Japanese Board Game “Sugoroku”)

966

Improvement in the grade-of-service in a cooperative overlay heterogeneous network

967

Improvement in the image transmission of the mobile digital C-arm X-ray system in the operating room

968

Improvement in the immune system of farm animals in a contaminated (including radiation) environment

969

Improvement in the Instrumentation for Partial Discharge Location in Cables

970

Improvement in the Instrumentation for Partial Discharge Location in Cables

971

Improvement in the J_c−B Characteristics of Ex-Situ MgB₂ Tape With SiC Addition

972

Improvement in the learning process as a function of distribution characteristics of binary data set

973

Improvement in the Light Extraction of Blue InGaN/GaN-Based LEDs Using Patterned Metal Contacts

974

Improvement in the Light Output Power of GaN-Based Light-Emitting Diodes by Natural-Cluster Silicon Dioxide Nanoparticles as the Current-Blocking Layer

975

Improvement in the Linearity of a LINC Transmitter using Genetic Algorithms

976

Improvement in the linearity of fast digital oscilloscopes used in averaging mode

977

Improvement in the Low Frequency Performance of Geometric Transition Radar Absorbers Using Square Loop Impedance Layers

978

Improvement in the luminous efficiency using ramped-square sustain waveform in an AC surface-discharge plasma display panel

979

Improvement in the measurement of the thermal properties of skin using changes in the ambient radiation temperature

980

Improvement in the measurements of partial discharges in hydrogenerators through high-frequency grounding of couplers

981

Improvement in the optical quality of GaInNAs/GaInAs quantum well structures by interfacial strain reduction

982

Improvement in the Performance of a Semiconductor Optical Amplifier Based Delayed Interference Signal-Wavelength Converter With Phase Offset of a Mach-Zehnder Delay Interferometer and BPF Detuning

983

Improvement in the performance of an Ar-Xe laser using magnetic spiker sustainer discharge excitation

984

Improvement in the performance of camera based vehicle detector for parking lot

985

Improvement in the performance of cascaded tap changers using a fuzzy rule-based scheme

986

Improvement in the performance of induction machine by using fuzzy logic based direct torque control

987

Improvement in the performance of neural network-based power transmission line fault classifiers

988

Improvement in the performance of on-load tap changer transformers operating in series

989

Improvement in the performance of P3HT: PCBM based organic photovoltaic cell using DMDCNQI as n type dopant and buffer layer

990

Improvement in the performance of passive motion support system with wires based on analysis of brake control

991

Improvement in the performance statistics of a Blumlein in double pulse mode

992

Improvement in the Phase Noise of a 10 GHz Optoelectronic Oscillator Using All-Photonic Gain

993

Improvement in the Photo-Bias Stability of Zinc Tin Oxide Thin-Film Transistors by Introducing a Thermal Oxidized ${\\rm TiO}_{2}$ Film as a Hole Carrier Blocking Layer

994

Improvement in the Polarization Characteristics of a Slit Carbon Plate: The Superposition of Slit Ferrite and Copper Plates Over a Slit Carbon Plate

995

Improvement in the pollution performance of standard suspension-type disc insulators by the use of semiconducting inserts

996

Improvement in the power generation of a PV array under partial shading conditions

997

Improvement in the properties of Sn-Zn Eutectic based Pb-free solder

998

Improvement in the quality of load current by various controlling techniques in hybrid power filter for harmonic compensation and resonance suppression

999

Improvement in the quality of speech received at suppressed carrier SSB

1000

Improvement in the Resolution of the Reflective Scanning Acoustic Microscope Application to the Non Destructive Evaluation in Microelectronics