بر اساس عنوان

1
Improvement of Flashover Strength and Reduction of Surface Charge-induced Field Enhancement of Insulating Material
2
Improvement of flexion/extension angle range of KneeRobo to replicate involuntary movements
3
Improvement of Flicker Noise in Lateral Asymmetric Channel N-MOSFETs for Sub-micron Analog Applications
4
Improvement of floating island and thick bottom oxide trench gate metal-oxide-semiconductor field-effect transistor
5
Improvement of flow pattern in multi-unit pumping station with side-intake based on CFD numerical simulation
6
Improvement of Flux Deflection With Light-Weight Magnetic Material
7
Improvement Of Flux Density Uniformity In Giant Magnetostrictive Material For Acoustic Vibration Element
8
Improvement of flux density uniformity in giant magnetostrictive material for acoustic vibration element
9
Improvement of FM demodulator with cochannel FM interference
10
Improvement of FM Noise and Carrier Stability of a Transferred Electron Oscillator by Combined Cavity and Injection Stabilization
11
Improvement of folded dipoles based on a branch current distribution
12
Improvement of force characteristic in controlled PM LSM by FEM
13
Improvement of force sensing by harmonics suppression in a motion-copying system
14
Improvement of Force-Sensor-Based Heart Rate Estimation Using Multichannel Data Fusion
15
Improvement of Forest Carbon Estimation by Integration of Regression Modeling and Spectral Unmixing of Landsat Data
16
Improvement of formability by servo die cushion in deep drawing
17
Improvement of Formula and Uncertainty of the Reference Magnetic Field for AC Magnetometer Calibration
18
Improvement of forward swept wing optimization in the compressible flow by using a hybrid method
19
Improvement of Fourier descriptor using spatial normalization
20
Improvement of Fourier Modal Methods by Means of Non Conventional Coordinate Systems
21
Improvement of Fourier series analysis technique by time-domain window function
22
Improvement of FPSM´s behaviour through geometry adjustments
23
Improvement Of Free Fat Graft Survival: In Vivo Long-Term Delivery Of IGF And Insulin Using PLGA/PEG Microspheres
24
Improvement of freestanding CMOS-MEMS through detailed stress analysis in metallic layers
25
Improvement of Freight Train Timetable for Single-Track Railway System
26
Improvement of frequency accuracy in a zemicondoctor laser pumped /sup 87/Rb atomic clock
27
Improvement of Frequency Characteristics of Preselector Using a Hybrid Circuit (Correspondence)
28
Improvement of frequency drift of at-cut resonators using an unelectroded resonant region
29
Improvement of frequency resolution for three-phase induction machine fault diagnosis
30
Improvement of Frequency Resolution of EMD Using an Optimized Masking Signal
31
Improvement of frequency response for a zero-flux current measuring system
32
Improvement of frequency sweeping by MoM matrix interpolation combined with Stoer-Bulirsch algorithm for multilayered structures
33
Improvement of frequency use and error performance of digital modulation in the personal mobile radios using quaternary-phase transition FSK (QTFSK)
34
Improvement of frequency-tripling efficiency through a walk-off compensation
35
Improvement of front-back sound localization characteristics in headphone-based 3D sound generation
36
Improvement of front-to-back ratio of backfire helical antenna
37
Improvement of fs/ps pulse shaper by miniaturization and use of enhanced filter bandwidth
38
Improvement of fuel and air supply method for a zigzag-type DM FC
39
Improvement of fuel economy in Power-Shift Automated Manual Transmission through shift strategy optimization - an experimental study
40
Improvement of Fuel Economy Using Fuzzy Logic-Based Power Distribution Control Strategy for a FCHEV
41
Improvement of Full-Duplex Radio-on-Fiber Transport System Performance Employing Optical SSB/VSB Filter
42
Improvement of Full-duplex Radio-over-Fiber System Performance Employing Wavelength Reuse Technique
43
Improvement of functionality and reliability by inductive HTS fault current limiter units
44
Improvement of Fusion Algorithm Based on Evidence Theory
45
Improvement of fuzzy analytic hierarchy process based on particle swarm optimization and its application research
46
Improvement of fuzzy auto-tuning method of DC chopper system using manipulated value
47
Improvement of Fuzzy Comprehensive Evaluation Model for Water Quality
48
Improvement of fuzzy controller with maximum power point tracking technology
49
Improvement of fuzzy geographically weighted clustering using particle swarm optimization
50
Improvement of Fuzzy Geographically Weighted Clustering-Ant Colony Optimization using context-based clustering
51
Improvement of fuzzy logic robot controllers using inverse entropy based T-operations
52
Improvement of Fuzzy Neural Network Based Human Activity Estimation System
53
Improvement of fuzzy power control for DS-CDMA cellular mobile system having variable number of users
54
Improvement of fuzzy vault scheme for securing key distribution in body sensor network
55
Improvement of FWM conversion efficiency by SBS-suppressed highly nonlinear dispersion-decreasing fiber with a strain distribution
56
Improvement of GaAs Epitaxial Layers by Indium Incorporation
57
Improvement of GaAs MESFET performance using surface p-layer doping (SPD) technique
58
Improvement of gain and noise figure in double-pass L-band EDFA by incorporating a fiber Bragg grating
59
Improvement of gain compression in microwave lumped and transversal bandpass filters
60
Improvement of gain in dual fed X band isoflux Choke horn antenna for use in LEO satellite mission
61
Improvement of gain of the phased array antenna by the parasitic elements
62
Improvement of Gain Recovery in QD-VCSOA at 1-Tb/s Cross Gain Modulation Using an Additional Light Beam
63
Improvement of GaInNAs/GaAs quantum wells by optimizing growth rate in MOCVD
64
Improvement of gait & muscle strength with functional electrical stimulation in sub-acute & chronic stroke patients
65
Improvement of Gallager Upper Bound and its Variations for Discrete Channels
66
Improvement of GaN crystalline quality on nanoscale patterned sapphire substrates
67
Improvement of GaN transistors working conditions to increase efficiency Of A 100W DC-DC converter
68
Improvement of GaN-based laser diode facets by FIB polishing
69
Improvement of GaN-based light-emitting diode by indium-tin-oxide transparent electrode and vertical electrode
70
Improvement of gate critical dimension for 40nm node device
71
Improvement of gate dielectric reliability for p/sup +/ poly MOS devices using remote PECVD top nitride deposition on thin gate oxides
72
Improvement of gate disturb degradation in SONOS FETs for Vth mismatch compensation in CMOS analog circuits
73
Improvement of gate drive for self-power emitter turn-off thyristor (SPETO)
74
Improvement of gate oxide reliability for tantalum-gate MOS devices using xenon plasma sputtering technology
75
Improvement of gate oxide reliability with O2 gas ash process in post poly resist strip and spacer etch asher process in 45nm CMOS technology
76
Improvement of Gencos´ maintenance schedule in a deregulated power system
77
Improvement of generalization ability for identifying dynamic systems by using universal learning networks
78
Improvement of generalized elementary factors and new criteria of the feedback stabilizability over integral domain
79
Improvement of generator damping through superconducting magnetic energy storage (SMES) in dynamic simulation test of power system
80
Improvement of Genetic Algorithm for Classifying SNP Fragments
81
Improvement of Genetic Algorithm for Vehicle Routing Problems with Time Windows
82
Improvement of GGH Multilinear Map
83
Improvement of ghost imaging on orbital angular momentum by using JPEG & Linear block codes
84
Improvement of global navigation satellite system signal acquisition using different grade inertial measurement units for high dynamic applications
85
Improvement of Global Performances of Band-Pass Filters using Non-Conventionnal Stepped Impedance Resonators
86
Improvement of GM (1, 1) model
87
Improvement Of GMR Characteristics In [Ni/sub 81/Fe/sub 19//Cu] Multilayers By Interfacial Modulation Technique Using Kr Ions
88
Improvement of GMR characteristics in [Ni81Fe19 /Cu] multilayers by interfacial modulation technique using Kr ions
89
Improvement of GMR characteristics of spin-valve films with a novel free layer
90
Improvement of GMR characteristics of spin-valve films with a novel free layer
91
Improvement of GNs inference through biological data integration
92
Improvement of Government Organization Service Management
93
Improvement of GPON MAC Protocol for IP TV Service
94
Improvement of GPS positioning accuracy by ionosphere delay correction
95
Improvement of grayscale image 2D maximum entropy threshold segmentation method
96
Improvement of Grayscale Image Segmentation Based on PSO Algorithm
97
Improvement of greenhouse heating control
98
Improvement of grid current performance for grid-connected DG under distorted grid voltage and nonlinear local loads
99
Improvement of grid-connected inverter systems with PR controllers under the unbalanced and distorted grid voltage
100
Improvement of ground to satellite fso link performance using transmit diversity in weak atmospheric turbulence
101
Improvement of grounding system of DC traction substation in railway power supply system
102
Improvement of group delay measurement accuracy using a two-frequency modulation phase-shift method
103
Improvement of GSM system performance due to frequency hopping and/or discontinuous transmission
104
Improvement of GTEM to OATS correlation
105
Improvement of guidance law for simultaneous attack
106
Improvement of Gunther´s identity-based key exchange protocol
107
Improvement of Gyrotron Beam Quality by Suppression of Parasitic Low-Frequency Oscillations
108
Improvement of H.263 encoding by adaptive arithmetic coding
109
Improvement of H.264 SVC by model-based adaptive resolution upconversion
110
Improvement of Hall Effect Current Transducer Metrological Performances in the Presence of Harmonic Distortion
111
Improvement of handover traffic performance in two-tier cellular mobile networks
112
Improvement of haptic feedback fidelity for telesurgical applications
113
Improvement of hard magnetic properties in microfabricated L10-FePt dot arrays upon post-annealing
114
Improvement of hardness of MOS capacitors to electron-beam irradiation and hot-electron injection by ultradry oxidation of silicon
115
Improvement of hardware embedded current control PWM “Hi-PWM” to control switching frequency
116
Improvement of harmonic dissector for minimal invasive surgery, modeling and the stiffness identification of the clipped object
117
Improvement of harmonic responses of a λ/4 resonator BPF with tap-connection technique
118
Improvement of Harn´s digital signature for Diffie-Hellman public keys
119
Improvement of HDD tracking performance using nonlinear compensation and RPT control
120
Improvement of Head Extraction for Height Measurement by Combination of Sphere Matching and Optical Flow
121
Improvement of Header Detection Rate in 60 GHz Single Carrier WPAN System
122
Improvement of hearing aid compatibility (HAC) of terminal antennas using wavetraps
123
Improvement of Heat Dissipation Capability of Slow-Wave Structure Using Two Assembling Methods
124
Improvement of Heat Dissipation Capability of Vacuum Device Using Iridium Nanoparticulate Film
125
Improvement of Heat Furnace Temperature Control System Via Model Free Control Method
126
Improvement of heat treatment energy efficiency and control of drying check occurrence using superheated steam
127
Improvement of heating system for hot pressure mould
128
Improvement of heat-resistance of RTV silicone elastomers with reduce environmental impact by loading nano-silica and calcium carbonate
129
Improvement of height estimation of low birth weight infants, newborns and infants image processing system using Kinect
130
Improvement of height measurement using stereo vision by sphere pattern matching
131
Improvement of helicopter handling qualities using Hinfinity -optimisation
132
Improvement of hemiplegic gait with single channel surface stimulation
133
Improvement of hemocompatibility for hydrodynamic levitation centrifugal pump by optimizing step bearings
134
Improvement of Hemolysis in a Centrifugal Blood Pump with Hydrodynamic Bearings and Semi-Open Impeller
135
Improvement of Hessian based vessel segmentation using two stage threshold and morphological image recovering
136
Improvement of hetero-interface abruptness in MOVPE growth of InGaAs/InP quantum wells by in-situ kinetic ellipsometry
137
Improvement of heterojunction silicon solar cell efficiency by Au nanoparticles
138
Improvement of Hidden Markov model evaluation of the mobile satellite channel by resorting to a transition localisation method
139
Improvement of high accuracy DGPS with real-time WaveSmooth/spl trade/ multipath mitigation technique
140
Improvement of high current density PCB design on a high end server system
141
Improvement of high frequency ocean surveillance radar using subspace methods based on sea clutter suppression
142
Improvement of high power and high current operation of GaN light emitting diodes by laser lift-off technique
143
Improvement of high power/high temperature operation of long wavelength laser diodes by band discontinuity reduction layer
144
Improvement of high reliability inverted rib-waveguide lasers by the observation of degradation mechanisms
145
Improvement of high reliable cluster load balancing algorithm based on multiple regression
146
Improvement of high resistivity substrate for future mixed analog-digital applications
147
Improvement of high speed 4-WS vehicle handling performance by sliding mode control
148
Improvement of high speed blocking voltage by means of metal field plate for GaAs Schottky power rectifiers
149
Improvement of high T/sub c/ SQUID performance using an integrated resistor
150
Improvement of high voltage switchgear reliability
151
Improvement of high-κ Ta2O5-based resistive switching memory using Ti interfacial layer
152
Improvement of high-availability Seamless Redundancy (HSR) traffic performance
153
Improvement of high-availability seamless redundancy (HSR) traffic performance for smart grid communications
154
Improvement of High-Availability Seamless Redundancy (HSR) Unicast Traffic Performance Using Port Locking
155
Improvement of High-Current Density PCB Design With PSU Load Balance and Redundancy on a High End Server System
156
Improvement of high-current large-volume discharge with profiled hollow-cathode electrodes
157
Improvement of higher order modulations for MUROS
158
Improvement of High-Frequency Characteristics of InGaAsSb-Base Double Heterojunction Bipolar Transistors by Inserting a Highly Doped GaAsSb Base Contact Layer
159
Improvement of high-frequency FinFET performance by fin width engineering
160
Improvement of high-frequency properties of iron-deficient Ni-Zn-Co ferrites by reduction of grain size
161
Improvement of high-frequency surface waves radar performances by use of multiple-input multiple-output configurations
162
Improvement of high-power-white-LED lamp performance by liquid injection
163
Improvement of High-Value Capacitance Measurement
164
Improvement of high-value capacitance measurement
165
Improvement of hill climbing method by introducing simple irradiance detection method
166
Improvement of hill-climbing method by constraining voltage operating point
167
Improvement of histogram-based image retrieval and classification
168
Improvement of holographic grating efficiency in Ag/AsGeSeS double layer
169
Improvement of home appliances design based on energy-saving concept: Case studies on hair dryer and coffee maker
170
Improvement of Homing Missile Guidance Performance Using Fuzzy Adaptive IMM Radome Slope Estimation
171
Improvement of Hopfield neural network algorithm
172
Improvement of hot carrier lifetime by cleaning process prior to selective reoxidation in metal gate LDD nMOSFETs
173
Improvement of hot carrier reliability with deuterium anneals for manufacturing multilevel metal/dielectric MOS systems
174
Improvement of hot switching lifetime in MEMS DC switches using a drain voltage-sustaining capacitor
175
Improvement of hot-carrier and radiation hardnesses in metal-oxide-nitride-oxide semiconductor devices by irradiation-then-anneal treatments
176
Improvement of hot-electron-induced degradation in MOS capacitors by repeated irradiation-then-anneal treatments
177
Improvement of HPGe detectors timing using pulse shape analysis
178
Improvement of HRV methodology for positive/negative emotion assessment
179
Improvement of hub strategy in robot soccer game
180
Improvement of human hand motion observation by exploiting contact force measurements
181
Improvement of human identification accuracy by wavelet of peak-aligned ECG
182
Improvement of human-machine interaction with applications to information retrieval system
183
Improvement of human-object observation system
184
Improvement of hydrogen passivation via the template of acid textured surface
185
Improvement of Hydrogen Pumping Characteristics of Penning Discharge Getter-Ion Pumps
186
Improvement of Hydrogenated Amorphous-Silicon TFT Performances With Low- k Siloxane-Based Hydrogen Silsesquioxane (HSQ) Passivation Layer
187
Improvement of Hydrophilicity of Interconnected Porous Hydroxyapatite by Dielectric Barrier Discharge Plasma Treatment
188
Improvement of hydrostatic bearing workbench structure based on the thermal deformation
189
Improvement of hyperspectral classification accuracy with limited training data using meanshift segmentation
190
Improvement of hysteresis control in switched reluctance motor drives
191
Improvement of I/sub c/ in Nb/sub 3/Sn conductors by reduction of axial prestrain
192
Improvement of Ic by loading and unloading bending strain for high strength Nb3Sn wires
193
Improvement of I2C Bus and RS-232 Serial Port under Complex Electromagnetic Environment
194
Improvement of IBAD MgO template layers on metallic substrates for YBCO HTS deposition
195
Improvement of ICA based probability density estimation for pattern recognition
196
Improvement of ICCG Convergence for Thin Elements in Magnetic Field Analyses Using the Finite-Element Method
197
Improvement of identification accuracy of multisensor conversion characteristic using SVM
198
Improvement of identification of weak-contrast radiolocation targets during monitoring of the Earth surface by radiopolarimetry
199
Improvement of identity-based authenticated key agreement protocol
200
Improvement of IEEE 802.11 for multimedia traffic in wireless LAN
201
Improvement of IEEE 802.11a systems over radio-on-multimode fiber applications
202
Improvement of IEEE 802.15.4a IR-UWB for time-critical industrial wireless sensor networks
203
Improvement of IGBT latching performance by indium doping
204
Improvement of IGBT model characterization with experimental tests
205
Improvement of IKONOS images with estimation of spatial information by neural networks
206
Improvement of illumination artifacts in medical ultrasound images using a biologically based algorithm for compression of wide dynamic range
207
Improvement of image alignment using camera attitude information
208
Improvement of Image and Video Matting with Multiple Reliability Maps
209
Improvement of Image Classification with Wavelet and Independent Component Analysis (ICA) based on a Structured Neural Network
210
Improvement of Image Contrast with Local Adaptation
211
Improvement of image matching by using the proximity criterion
212
Improvement of image quality by optical image processing suitable for pixel shape of display
213
Improvement of image quality by tilted fan beam data acquisition in a helical scan X-ray CT
214
Improvement of image quality in MR image using adaptive K-nearest neighbor averaging filter
215
Improvement of Image Quality in Multiplane Tomographic Scintillation Camera Restoration of Circular Motion Blur
216
Improvement of image quality in multispectral PET by energy space smoothing and detector space normalization
217
Improvement of Image Quality in Multizone Scintillation Cameras Using Fiber-Optic Coupling to Reduce Effective PMT Size
218
Improvement of image quality in transmission computed tomography using synchrotron monochromatic x-ray sheet beam
219
Improvement of image reconstruction software for digital holographic microscope off-axis configuration
220
Improvement of image resolution beyond classical limit by phase-sensitive optical parametric amplifier
221
Improvement of image resolution in ScanSAR simulation
222
Improvement of Image Retrieval by Fusing Different Descriptors
223
Improvement of Image Segmentation Accuracy Based on Multiscale Optimization Procedure
224
Improvement of image zooming using least directional differences based on linear and cubic interpolation
225
Improvement of imbalance and FRT capacity in distribution voltage deteriorated by integration of renewable power generations by use of STATCOM technology
226
Improvement of Impact Ionization Effect and Subthreshold Current in InAlAs/InGaAs Metal–Oxide–Semiconductor Metamorphic HEMT With a Liquid-Phase Oxidized InAlAs as Gate Insulator
227
Improvement of impedance matching between NS pulse geberator and discharge reactor
228
Improvement of implementation of ISO-IEC 20000 Edition 2 standard in IT systems of Telecom operator through comparison with ITIL V3 best practices
229
Improvement of Implicit Residual DPCM for HEVC
230
Improvement of imprinted pattern uniformity using sapphire mold
231
Improvement of impulse radio electromagnetic compatibility
232
Improvement of InAlAs/InP heterointerface grown by MOVPE by using thin AlP layer
233
Improvement of Indirect Rotor Flux Orientation Control of Induction Motors with Skewed Rotor Bars
234
Improvement of Individual Solar Heater Efficiency
235
Improvement of individual-based models for wild animals in river ecosystem
236
Improvement of indoor location sensing algorithm using Wireless Local Area Network (WLAN) IEEE 802.11b
237
Improvement of indoor power line channel response
238
Improvement of Inductance Gradient in Railgun Using Ferromagnetic Materials
239
Improvement of induction Generator stability using braking resistors
240
Improvement of induction machine performance using power factor correction
241
Improvement of induction machine stability by modulation techniques
242
Improvement of induction motor drive systems supplied by photovoltaic arrays with frequency control
243
Improvement of induction motor drive systems supplied by photovoltaic arrays with frequency control
244
Improvement of induction motors models for power system transient stability studies
245
Improvement of Inertial Electrostatic Confinement Device by Lowed Operating Gas Pressure using Magnetron-Discharge-Based Ion Source
246
Improvement of Inertial Electrostatic Confinement Device by Magnetron-Discharge-Based Built-in Ion Source
247
Improvement of inertial sensor based indoor navigation by video content analysis
248
Improvement of infrared lights sensitivity on PZT emitter
249
Improvement of infrastructure and preservation of global environment
250
Improvement of InGaN/GaN laser diodes by using a Si-doped In/sub 0.23/Ga/sub 0.77/N/GaN short-period superlattice tunneling contact layer
251
Improvement of InGaN-GaN light-emitting diode performance with a nano-roughened p-GaN surface
252
Improvement of InGaN-GaN light-emitting diodes with surface-textured indium-tin-oxide transparent ohmic contacts
253
Improvement of in-line power monitor integration technology for a compact multifunctional silica PLC
254
Improvement of inner evaporative cooling experiment model for large turbo generator stator bars
255
Improvement of InP MISFET characteristics using infra-red lamp annealing
256
Improvement of Input Current Waveforms for a Matrix Converter Using a Novel Hybrid Commutation Method
257
Improvement of input power dynamic range for 20 Gbit/s optical WDM switch nodes using an integrated Michelson wavelength converter
258
Improvement of input power factor in AC choppers using asymmetrical PWM technique
259
Improvement of input side currents of a three phase rectifier using Cúk converter in discontinuous-capacitor-voltage mode operation
260
Improvement of input-output correlations of electric power load forecasting by scatter search
261
Improvement of InSAR DEM accuracy using data and sensor fusion
262
Improvement of insertion loss of band pass tunable filter using SAW resonators and GaAs diode variable capacitors
263
Improvement of In-service Education and Training on Medical Imaging Equipment of Bangladesh
264
Improvement of Instantaneous Availabilities by Decreasing Delay Time
265
Improvement of insulation in moist dielectric liquid by furfural
266
Improvement of integral-type dynamic E&S modeling
267
Improvement of integrated dipole antenna performance using diamond for intra-chip wireless interconnection
268
Improvement of integrated services on CDMA wireless LANs using the handshake-ALOHA protocol
269
Improvement of Integration-Type Dynamic E&S Modeling
270
Improvement of Intensity-Modulated Signal With Feed-Forward Control
271
Improvement of interactive EC fitting based on substitute evaluation using sound volume preference
272
Improvement of interconnections of low-cost, low-power photovoltaics
273
Improvement of interfacial adhesion strength and thermal stability of cu/cap barrier/low-k dielectric stack by plasma treatment on the surface of Cu film
274
Improvement of interfacial layer reliability by incorporation of deuterium into HfAlOx formed by D2O-ALD
275
Improvement of interfacial performance on silicone insulating and semiconducting interface by plasma-treatment
276
Improvement of interferometric SAR coherence estimates by slope-adaptive range common-band filtering
277
Improvement of Interleaved Multiplication Algorithm
278
Improvement of Interleaver for Turbo Codes in Wireless Communication
279
Improvement of Intermodulation Distortion Asymmetry Characteristics With Wideband Microwave Signals in High Power Amplifiers
280
Improvement of intermodulation distortion in microwave m.e.s.f.e.t. amplifiers using gate-bias compensation
281
Improvement of intermodulation distortion in microwave power amplifiers with intrinsic second-harmonic short-circuit termination
282
Improvement of internal audits of quality management system on the basis of the tqm principles
283
Improvement of internal charging current compensation for transmission line differential protection
284
Improvement of internal light-trapping for silicon based solar cells with a newly developed structure
285
Improvement of Interpixel Uniformity in Carbon Nanotube Field Emission Display by Luminance Correction Circuit
286
Improvement of Interpoly Dielectric Characteristics by Plasma Nitridation and Oxidation for Future nand Flash Memory
287
Improvement of inverse scattering results by combining TM- and TE-polarized probing waves using an iterative adaptation technique
288
Improvement of I-picture coding using inter-picture processing
289
Improvement of IPMSM performance through a mixed radial-tangential rotor structure
290
Improvement of IPMSM sensorless control performance by suppression of harmonics on the vector control using Fourier transform and repetitive control
291
Improvement of IS-95 by symbol splitting
292
Improvement of ISAR global range alignment
293
Improvement of ischemic border zone with a newly developed mechanical cardiac assist device
294
Improvement of islanded operating stability for lean-burn gas engine by effective use of power storage device
295
Improvement of Item-Based Collaborative Filtering Algorithm Based on Hesitation Degree
296
Improvement of iterative decoding algorithm for linear block codes
297
Improvement of Iterative Decoding Algorithm in the Adaptive Modulation and Coding System
298
Improvement of Izhikevich´s Neuronal and Neural Network Model
299
Improvement of J/sub c/ in Bi-2212-Ag composite superconductor by controlling Po/sub 2/ on the partial melt process
300
Improvement of Japanese Signature Verification by Combined Segmentation Verification Approach
301
Improvement of Japanese Signature Verification by Segmentation-Verification
302
Improvement of JEDEC Drop Test in SJR Qualification through Alternative Test Board Design
303
Improvement of Joint Structure for Mechanical Butt Joint of Stacked BSCCO 2223 Cable
304
Improvement of JPEG compression efficiency using information hiding and image restoration
305
Improvement of JPEG2000 in Retaining Texture via Bandelet
306
Improvement of JPEG2000 Using Curved Wavelet Transform
307
Improvement of junction characteristics of ultra shallow junction with boron-cluster implantation and Ni-silicide for nano-scale CMOS technology
308
Improvement of junction leakage of nickel silicided junction by a Ti-capping layer
309
Improvement of junction properties of YBaCuO/PrBaCuO/YBaCuO trilayer Josephson junctions
310
Improvement of Kademlia Based on Physical Location
311
Improvement of Kerberos protocol based on dynamic password and “One-time public key”
312
Improvement of kinematically redundant manipulator design and placement using torque-weighted isotropy measures
313
Improvement of kink and beam steering characteristics of 0.98-μm GaInAs-GaInP high-power lasers utilizing channel ion implantation
314
Improvement of kink-free operation in InGaAs/GaAs/AlGaAs high power, ridge waveguide laser diodes
315
Improvement of kink-free output power by using highly resistive regions in both sides of the ridge stripe for 980-nm laser diodes
316
Improvement of K-means clustering algorithm with better initial centroids based on weighted average
317
Improvement of knee flexion and extension simulation accuracy in KneeRobo
318
Improvement of L/UL performance using load/unload mechanism control considering disk vibration characteristics
319
Improvement of L1 Signaling Performance for DVB-T2 Using Optimized Two-Dimensional Non-Uniform Constellations
320
Improvement of ladder-type SAW filter characteristics by reduction of inter-stage mismatching loss
321
Improvement of Lagrangian Relaxation Convergence for Production Scheduling
322
Improvement of Lamb waves sensors temperature sensitivity compensation
323
Improvement of Land Cover Map from Satellite Imagery using DST and DSmT
324
Improvement of language Identification performance by Aggregated Phone Recognizer
325
Improvement of language identification performance using generalized phone recognizer
326
Improvement of large area homogeneity of InP based III-V layers by using the gas foil rotation concept
327
Improvement of large-area SCAF structure a-Si solar cells with plastic film substrate
328
Improvement of laser light characteristics by modulation of the complete refractive index
329
Improvement of laser pointing performance using a joint observer-based adaptive controller
330
Improvement of laser trimmed film resistor stability by selection of optimal trim paths
331
Improvement of laser-induced damage tolerance in CsLiB/sub 6/O/sub 10/ for high-power UV laser source
332
Improvement of latchup hardness by geometry and technology tuning
333
Improvement of L-DACS1 design by combining B-AMC with P34 and WiMAX technologies
334
Improvement of LDO´s PSRR deteriorated by reducing power consumption : Implementation and experimental results
335
Improvement of LEACH in Wireless Sensor Networks based on balanced energy strategy
336
Improvement of LEACH protocol based on uneven clustering algorithm
337
Improvement of Leach Protocol for Wireless Sensor Networks
338
Improvement of LEACH protocol for WSN
339
Improvement of lead/acid batteries (LAB) with use of high electroconductive polymers (HECPs)
340
Improvement of leakage-current-related yield of SOI MOSFETs using nitrogen ion-implantation to the source and drain regions
341
Improvement of learning efficiency by exploiting multiarticular muscles -a case study with a 2D serpentine robot-
342
Improvement of learning efficiency in neural network using poly-Si TFTs by synapse TFTs with LDD structure
343
Improvement of learning environment for electric work practice using ICT
344
Improvement of learning outcome and its measurement using social learning intelligence
345
Improvement of learning performance of multi-layer perceptron by two different pulse glial networks
346
Improvement of learning rate for RBF neural networks in a helicopter sound identification system introducing two-phase OSD learning method
347
Improvement of Learning Styles Diagnosis Based on Outliers Reduction of User Interface Behaviors
348
Improvement of learning surface by exploiting the interplay between control and mechanical dynamics
349
Improvement of Least-Squares Under Arbitrary Weighted MSE
350
Improvement of LED extraction efficiency with antireflection coating
351
Improvement of LED extraction efficiency with antireflection coating
352
Improvement of Lee-Kim-Yoo Password-Based Key Agreement Scheme
353
Improvement of Lesion Detection in Scintigraphic Images by SVD Techniques for Resolution Recovery
354
Improvement of level-crossing reconstruction of potential maps by use of a priori information
355
Improvement of lifetime model on accelerated thermal aging of oil-paper
356
Improvement of Lifetime of Wireless Sensor Network by Jointly Effort of Exponential Node Distribution and Mixed Routing
357
Improvement of Lifetimes of Magneto-Optical Disks by Alloying Various Elements
358
Improvement of light coupling in BGO detector module by optimization of the crystal shape
359
Improvement of Light Extraction Efficiency and Reduction of Leakage Current in GaN-Based LED Via V-Pit Formation
360
Improvement of light extraction efficiency of flip-chip light-emitting diode by texturing the bottom side surface of sapphire substrate
361
Improvement of light extraction efficiency of white LEDs using microstructure array on phosphor silicone layer
362
Improvement of Light Extraction From Patterned Polymer Encapsulated GaN-Based Flip-Chip Light-Emitting Diodes by Imprinting
363
Improvement of light load efficiency of Dual Active Bridge DC-DC converter by using dual leakage transformer and variable frequency
364
Improvement of light trapping effect using the configuration of subwavelength-structured optical disc
365
Improvement of Light Trapping in a-Si:H-Based Solar Cells by Inserting a ZnO/LiF Double Interlayer
366
Improvement of light-current characteristic linearity in a quantum well laser with asymmetric barriers
367
Improvement of light-extraction efficiency of deep-UV LEDs using transparent p-AlGaN contact layer
368
Improvement of light-load efficiency using width-switching scheme for CMOS transistors
369
Improvement of lightness modification method based on Craik-O´Brien effect for dichromats
370
Improvement of lightning protection against direct strokes
371
Improvement of light-trapping effect on microcrystalline silicon solar cells by using high haze transparent conductive oxide films
372
Improvement of Li-ion Battery Discharging Performance by Pulse and Sinusoidal Current Strategies
373
Improvement of likelihood in particle filter for interactive color tracking
374
Improvement of linear actuator with ER gel
375
Improvement of linear equivalent circuit model to identify simultaneous switching noise current in cryptographic integrated circuits
376
Improvement of linear model matching flight control system — Attachment of observer
377
Improvement of linear spectral mixture analysis and experimentation in estimation of urban vegetation fraction
378
Improvement of linear spectral unmixing results using over-shoot pixels (case study: URMIA lake basin)
379
Improvement of linearity in a CMOS transconductor by employing a squaring circuit
380
Improvement of linearity in EAM by composite QWs
381
Improvement of LineROVer: A mobile robot for de-icing of transmission lines
382
Improvement of lineshape estimation for MRS signals
383
Improvement of linewidth enhancement factor in 1.55-μm multiple-quantum-well laser diodes
384
Improvement of link efficiency by compressing SIP signaling messages with SigComp
385
Improvement of Link Process in 4D CAD Viewer by Using Interface Board for Construction Project Management
386
Improvement of Lip Reading Performance in Real Environments Using Speaker and Environmental Adaptation
387
Improvement of liquid viscous coefficient experiment instrument
388
Improvement of liquid-phase SH-SAW sensor device on 36° Y-X LiTaO3 substrate
389
Improvement of lithium adsorption capacity by optimising the parameters affecting synthesised ion sieves
390
Improvement of load bus voltages considering the optimal dispatch of active and reactive powers
391
Improvement of load capacity of circular aerostatic thrust bearings with the finite volume method
392
Improvement of load frequency control with fuzzy gain scheduled SMES unit considering governor dead-band and GRC
393
Improvement of load frequency control with fuzzy gain scheduled superconducting magnetic energy storage unit
394
Improvement of loading/unloading performance using control input position and considering disk vibration characteristics
395
Improvement of load-margin and bus voltage of Bangladesh power system with the penetration of PV based generation
396
Improvement of Local Greedy Algorithm in GEAR
397
Improvement of Local Voltage in Feeders With Photovoltaic Using Electric Vehicles
398
Improvement of localization results in wireless networks using estimation of distances between unknown nodes: Simulation and real testbed evaluation
399
Improvement of localized corrosion resistance of austenitic stainless steel by N, Cr and Mo ion implantation
400
Improvement of location aided routing protocol in Vehicular Ad Hoc Networks on highway
401
Improvement of Lock-in Electrical Bio-Impedance Analyzer for Implantable Medical Devices
402
Improvement of locomotive performance of capsular microrobot moving in GI tract using position based feedback control
403
Improvement of Long-Term Durability and Bias Stress Stability in p-Type SnO Thin-Film Transistors Using a SU-8 Passivation Layer
404
Improvement of low field magnetostriction of amorphous TbFe sputtered films by thermal annealing
405
Improvement of low gray scale linearity using multi-luminance-level subfield method in plasma display panel
406
Improvement of low gray scale linearity using multi-luminance-level subfield method in plasma display panel
407
Improvement of low gray-level linearity using perceived luminance of human visual system in PDP-TV
408
Improvement of low gray-level linearity using perceived luminance of human visual system in PDP-TV
409
Improvement of low speed characteristics of railway vehicle by sensorless control using high frequency injection
410
Improvement of low speed operation of electric machine with an inertia identification using ROELO
411
Improvement of lower side speed control characteristics of an induction motor without a speed sensor
412
Improvement of low-frequency characteristics of piezoelectric speakers based on acoustic diaphragms
413
Improvement of low-frequency noise characteristics of n-MOSFETs using backsurface argon-ion bombardment
414
Improvement of low-frequency railway power system stability using an advanced multivariable control concept
415
Improvement of low-frequency system stability in 16.7-Hz railway-power grids by multivariable line-converter control in a multiple traction-vehicle scenario
416
Improvement of low-frequency system stability in 50-Hz railway-power grids by multivariable line-converter control in a distance-variation scenario
417
Improvement of low-speed operation performance of DTC for three-level inverter-fed induction motors
418
Improvement of low-speed operation performance of DTC for three-level inverter-fed multi-phase synchronous motor
419
Improvement of low-temperature gate dielectric formed in N2O plasma by an additional CF4 pretreatment process
420
Improvement of low-temperature sintered ink containing nano-Ag for ink-jet printing of conductive structures on flexible substrates
421
Improvement of LS-SVM for time series prediction
422
Improvement of LTE Handover Performance through Interference Coordination
423
Improvement of lumen efficiency in white light-emitting diodes by roughened-dispensing package
424
Improvement of Luminance and Luminous Efficacy of Mercury-Free, Flat Fluorescent Lamp by Optimizing Phosphor Profile
425
Improvement of luminance and luminous efficiency using address voltage pulse during sustain-period of AC-PDP
426
Improvement of Luminance and Luminous Efficiency Using New Electrode Structures in AC Plasma Display
427
Improvement of luminance efficiency in xenon dielectric barrier discharge flat lamp
428
Improvement of luminescence properties of InGaP/InAlP QW heterostructures with oxidized InAlP cladding layers grown by MOCVD
429
Improvement of luminous efficacy and driving characteristics in AC plasma display by changing the bus position
430
Improvement of Luminous Efficacy Using Short Sustain Pulsewidth and Long Off-Time Between Sustain Pulses in AC Plasma Display Panel
431
Improvement of luminous efficiency and radiation transport in PDP
432
Improvement of LVRT capability of variable speed wind turbine generators using SMES unit
433
Improvement of M E Signal-To-Noise Ratio, Flaw Classification and Reconstruction with Data from Automatic Ultrasonic Inspection -ALOK-
434
Improvement of magnetic and R/W properties in longitudinal media by using CrX/Cr dual underlayer
435
Improvement of magnetic circuit in levitation system using HTS and soft magnetic material
436
Improvement of magnetic circuit in levitation system using HTS and soft magnetic material
437
Improvement of Magnetic Field Behavior of Ex-Situ Processed Magnesium Diboride Tapes
438
Improvement of magnetic force microscope resolution and application to high-density recording media
439
Improvement of Magnetic Force Microscope Resolution and Application to High-Density Recording Media
440
Improvement of magnetic induction distribution uniformity along lateral surface of small-size inductor
441
Improvement of magnetic interface coupling through a magnetic coupling gel
442
Improvement of Magnetic Levitation Properties on Levitation System Using GdBCO Bulk Superconductors
443
Improvement of magnetic properties and crystallinity of Co-Cr/Ni-Fe double-layer with very thin Co/sub 79/Cr/sub 21/ underlayer
444
Improvement of magnetic properties and crystallinity of Co-Cr/Ni-Fe double-layer with very thin Co79Cr21 underlayer
445
Improvement of magnetic properties in thinner HI-B with domain-refinement
446
Improvement of magnetic properties of 34Ni-29Co-3Mo-Fe alloy by adjusting the composition and controlling the textures of recrystallization
447
Improvement Of Magnetic Shielding Effect The Superposition Of Double-magnetic Cylinder Over A High-Tc Superconductina Cylinder
448
Improvement of magnetic shielding effects: the superposition of a double-magnetic cylinder over a high-Tc superconducting cylinder
449
Improvement of magnetic system of the speed sensor in the devices of the impact parameters control
450
Improvement of Magnetically Levitated Superconducting Conveyer Using PMB
451
Improvement of magnetomechanical properties of cobalt ferrite by magnetic anneal
452
Improvement of magnetomechanical properties of cobalt ferrite by magnetic annealing
453
Improvement of Magneto-Optic Properties on Multilayered Films
454
Improvement of main insulation structure for 110kV electric power transformer based on electric field analysis
455
Improvement of manipulability for locomotion of a snake robot by mass distribution
456
Improvement of manipulating robot servo drives´ control system
457
Improvement of manual 2D/3D registration by decoupling the visual influence of the six degrees of freedom
458
Improvement of manufacturing management efficiency in a small high tech company
459
Improvement of manufacturing process for multilayer substrate integrated waveguide cavity
460
Improvement of manufacturing workcell layout design using weighted isotropy metrics
461
Improvement of Marching Cubes Algorithm Based on Sign Determination
462
Improvement of Markov chain processes for mathematical optimization of cancer treatment
463
Improvement of mask-limited yield with a vote-taking lithographic scheme
464
Improvement of mass standard up to 20 kg by multiple calibration method
465
Improvement of masses detection in digital mammograms employing non-linear filtering
466
Improvement of matching and evaluation in handwritten numeral recognition using flexible standard patterns
467
Improvement of material characterization in the 40GHz band
468
Improvement of Matrix Converter Drive Reliability by Online Fault Detection and a Fault-Tolerant Switching Strategy
469
Improvement of maximum admissible QoS traffic by traffic observations
470
Improvement of maximum likelihood frequency offset estimation for multi-carrier CDMA systems over multipath fading channel
471
Improvement of Maximum Power Point Tracking based on nonlinear control of boost converter
472
Improvement of MBSD by scaling noise masking threshold and correlation analysis with MOS difference instead of MOS
473
Improvement of MC Si solar cells by Al-gettering and hydrogen passivation
474
Improvement of measured precision on complex permeability of magnetic thin films via optimizing the post data processing method
475
Improvement of measurement accuracy for Capacitive Voltage Probe without pre-calibration
476
Improvement of measurement accuracy of FBG sensor systems by use of gas absorption lines as multi-wavelength references
477
Improvement of measurement accuracy of fibre Bragg grating sensor systems by use of gas absorption lines as multi-wavelength references
478
Improvement of measurement accuracy of FMCW level radar
479
Improvement of Measurement Accuracy of Infrared Moisture Meter by Considering the Impact of Moisture Inside Optical Components
480
Improvement of measurement accuracy of line-focus beam acoustic microscope system
481
Improvement of measurement techniques in PD pulse detection in large HV equipment
482
Improvement of measurement-speed by virtual optical-system for confocal laser scanning microscope
483
Improvement of measuring accuracy of magnetic field strength in single sheet testers by using two H coils
484
Improvement of measuring method of DC magnetization curve using ring specimen
485
Improvement of mechanical impact resistance of BGA packages with Pb-free solder bumps
486
Improvement of mechanical performances by plasma polymerisation technique for composite biomaterials
487
Improvement of mechanical strength for Nanosized-Scandia Doped Dispenser cathodes
488
Improvement of mechanical workability and constancy of permeability of Fe-Ni-Si alloy by splat cooling technique
489
Improvement of mechanism of upper extremity exercise support system “Robotherapist" and development of application software
490
Improvement of medical image resolution using an extended 2D factorized form complex number parametric model
491
Improvement of Medical Imaging Equipment Management in public hospitals of Bangladesh
492
Improvement of medical undergraduates´ scientific research quality in histology learning using interactive web-based programs
493
Improvement of MEI coefficients by optimization
494
Improvement of memory bandwidth utilization using OpenMP task with processor affinity
495
Improvement of Memory State Misidentification Caused by Trap-Assisted GIDL Current in a SONOS-TFT Memory Device
496
Improvement of Mental Rotation Ability Using Blender 3-D
497
Improvement of Messages Delivery Time on Vehicular Delay-Tolerant Networks
498
Improvement of metal-semiconductor-metal GaN ultraviolet detectors
499
Improvement of metasurface continuity conditions
500
Improvement of method for telephony network signal sending over internet
501
Improvement of Method of the Silicic Compiling Through Discrete Optimization of Topology and Structurally-Technological Limitations of the Integrated Circuit
502
Improvement of methods for long-term transmission systems expansion in current conditions
503
Improvement of methods for reconstructing water heating aggregated load curves and evaluating demand-side control benefits
504
Improvement of metric accuracy of digital 3D models through digital photogrammetry. A case study: Donatello´s Maddalena
505
Improvement of metrological characteristics in computer-based digital oscilloscope systems
506
Improvement of metrological characteristics of the antenna system using smart angle sensor
507
Improvement of metrological performance for low-cost DSP-based board with analog interface circuit
508
Improvement of micro mobile machine with piezoelectric driving force actuator
509
Improvement of microassemblies ultrasonic images using adapted signal processing techniques
510
Improvement of microcrystalline silicon N-I-P solar cell by hydrogen plasma treatment for n/i interface
511
Improvement of microcrystalline silicon solar cell by insertion of buffer layer to TCO/p interface
512
Improvement Of Micromagnetism Of Ni-Fe/Co/sub 67/Cr/sub 33/ Multilayers for Backlayer of Perpendicular Magnetic Recording Media
513
Improvement of micromagnetism of Ni-Fe/Co67Cr33 multilayers for backlayers of perpendicular magnetic recording media
514
Improvement of MicroRNA Target Prediction Using An Enhanced Feature Set: A Machine Learning Approach
515
Improvement of microscopic and macroscopic uniformity in 4-inch InP substrate for IC application by vertical boat growth
516
Improvement of microstrip antenna performance using two triangular structures
517
Improvement of microstrip antenna´s gain, bandwidth and fabrication tolerance at terahertz frequency bands
518
Improvement of microstrip open loop resonator filter using aperture
519
Improvement of microstrip patch antenna parameters for wireless communication
520
Improvement of microstrip patch antenna radiation patterns
521
Improvement of microstructure and mechanical properties of Sn-58Bi alloy with La2O3
522
Improvement of MIMO channel capacity using block-wise controlled transmit-array antenna
523
Improvement of MIMO channel capacity using tunable transmit-array antenna
524
Improvement of MIMO channel estimation using Signal Space of communication data
525
Improvement of mine environment by Eucalyptus plantation
526
Improvement of mini fab uptime by the multi-task and multi-functional tools
527
Improvement of miniaturized olfactory display using electroosmotic pumps and SAW device
528
Improvement of miniaturized resonant type SIDM actuator
529
Improvement of mini-bolus thermodilution using an optimal subspace-based matrix filter
530
Improvement of mini-fab uptime by using multitask and multifunctional tools
531
Improvement of minimum disclosure approach to authentication and privacy in RFID systems
532
Improvement of Minimum-Range Capability of the TPS-1D Radar
533
Improvement of minority carrier lifetime in GaAs/AlxGa1−xAs core-shell nanowires
534
Improvement of minority-carrier lifetime in GaAsN grown by chemical beam epitaxy
535
Improvement of MISO Single-User Time Reversal Ultra-Wideband Using a DFE Channel Equalizer
536
Improvement of M-Layer: a tropospheric propagation Program
537
Improvement of MLP models for forecasting electrical energy consumption using OBD and OBS methods
538
Improvement of modal gain of InAs/InP quantum-dash lasers
539
Improvement of mode conversion for LTCC multilayer common mode filter by twisted differential lines structure
540
Improvement of model-mediated teleoperation using a new hybrid environment estimation technique
541
Improvement of MODIS 8-day LAI/FPAR product with temporal filters to generate high quality time-series product
542
Improvement of MODIS retrieval of aerosols over urban areas using a regionally tuned ground albedo model
543
Improvement of MODIS snow cover algorithm for the Hindu Kush-Himalayan region
544
Improvement of MODIS Wildfire Detection Capacity and Performance in the Italian Region
545
Improvement of modulation patterns in a method for parallel modulo exponentiation with optical amplitude modulation
546
Improvement of modulation speed in Si slow light modulator by optimizing doping profile
547
Improvement of Moisture Estimation Accuracy of Vegetation-Covered Soil by Combined Active/Passive Microwave Remote Sensing
548
Improvement of Moisture Resistance by Ion-Exchange Process
549
Improvement of moisture resistance in plastic encapsulated MOS-IC by surface finishing copper leadframe
550
Improvement of monitoring and diagnosis of broken bars/end-ring connectors and airgap eccentricities of squirrel-cage induction motors in ASDs using a time-stepping coupled finite element-state space technique
551
Improvement of morphological and electrical properties in poly (3-hexylthiophene-2, 5-diyl) Films Formed by Thermal Annealing in the presence of electric field during the solvent drying step
552
Improvement of morphology, structure, and optical properties of GaAs nanowires grown on Si substrates
553
Improvement of morphology-based interpolation
554
Improvement of MOSFET subthreshold leakage current by its irradiation with hydrogen radicals generated in microwave-excited high-density inert gas plasma
555
Improvement of motility of bacterium-driven microobject fabricated by optical tweezers
556
Improvement of Motion Compensated Inter-Field Interpolation Method for De-Interlacing
557
Improvement of motion estimation accuracy using gradient vector distribution in advanced picture coding
558
Improvement of motor drive system by nominal model tracking system using hysteresis element
559
Improvement of moving characteristics of cableless micro-actuator and consideration of reversible motion
560
Improvement of Moving Horizon Estimators via Direct Virtual Sensor techniques
561
Improvement of moving objects detection in continued all-day illumination conditions using color invariants and color spaces
562
Improvement of moving objects tracking via modified particle distribution in particle filter algorithm
563
Improvement of MPEG-21 right expression language
564
Improvement of MPTCP Performance in heterogeneous network using packet scheduling mechanism
565
Improvement of MR brain images segmentation based on interval type-2 fuzzy C-Means
566
Improvement of MRI brain classification using principal component analysis
567
Improvement of MRI magnet design through sensitivity analysis
568
Improvement of multicast routing supporting Mobile Ad Hoc Networks with unidirectional links
569
Improvement of Multicast Service Transmission by Using Unicast Channels in Cellular Networks
570
Improvement of Multi-Channel MAC Protocol for Dense VANET with Directional Antennas
571
Improvement of multi-crystalline silicon solar cell fabricated by laser doping technique using continuous wave laser
572
Improvement of multi-crystalline silicon wafer quality during solar cell fabrication process
573
Improvement of Multi-hop Packet Transmission Scheduling in WDM Optical Star Networks
574
Improvement of multilateration (MLAT) accuracy and convergence for airport surveillance
575
Improvement of multi-machine power system stability by variable series capacitor (VSrC)
576
Improvement of Multimedia Performance Based on 3-D Stacking Memory Architecture and Software Refinement
577
Improvement of multi-mode-PCA based filtering using fourth order cumulants
578
Improvement of Multi-Pixel Photon Counter (MPPC)
579
Improvement of multiple antennas diversity systems through receiver nonlinear coupling cancellation
580
Improvement of multiple CP/CPS based on level of assurance for campus PKI deployment
581
Improvement of Multiple Ground Targets Tracking with GMTI Sensor and Fusion of Identification Attributes
582
Improvement of multiple loop antenna for near-field UHF RFID applications
583
Improvement of multiple tissue contrast in magnetic resonance imaging by image combination
584
Improvement of multiplicity in flexible signal bit rate OCDM system using noise reduction circuits
585
Improvement of multiplicity in OCDM system using optical time gating circuit
586
Improvement of multi-proxy signature scheme
587
Improvement of multisensor data fusion on track loss in clutter
588
Improvement of multisensor fusion in speed limit determination by quantifying navigation reliability
589
Improvement of multi-user searchable encrypted data scheme
590
Improvement of Mutual Information based on TF-CA-CI algorithm
591
Improvement of myocardial perfusion defect severity quantitation in cardiac SPECT: A simulation study
592
Improvement of N0x Reduction Efficiency in High Temperature System by Aerosol Assisted Non-Thermal Plasma Technique
593
Improvement of naive Bayes collaborative filtering using interval estimation
594
Improvement of nano MOSFET ultra thin gate leakage and driving current with low temperature polygen process
595
Improvement of narrow emitter bipolar transistor performance by in-situ highly doped arsenic polysilicon technique
596
Improvement of natural frequency extraction in frequency domain
597
Improvement of naturalness for an HMM-based Vietnamese speech synthesis using the prosodic information
598
Improvement of Nb3Sn high field critical current by a two-stage reaction
599
Improvement of NBTI and electrical characteristics by ozone pre-treatment and PBTI issues in HfAlO(N) high-k gate dielectrics
600
Improvement of NC simulation using three-dimension graphics arrangement method
601
Improvement of NDIR carbon dioxide sensor accuracy
602
Improvement of NDRO characteristics of fine-striped magnetic thin film memory element
603
Improvement of near-field optical storage system with an artificial negative index film
604
Improvement of near-field scanning optical microscope and observation of optical waveguide
605
Improvement of near-infrared topography by optode arrangement and reconstruction algorithm using spatial sensitivity profile
606
Improvement of near-ultraviolet InGaN-GaN light-emitting diodes through higher pressure grown underlying GaN layers
607
Improvement of near-ultraviolet InGaN-GaN light-emitting diodes with an AlGaN electron-blocking layer grown at low temperature
608
Improvement of needle type applicator made of shape memory alloy
609
Improvement of Negative Bias Stress Stability in Mg0.03Zn0.97O Thin-Film Transistors
610
Improvement of Negative Bias Temperature Instability by Stress Proximity Technique
611
Improvement of network damping and transient stability by active and reactive power control
612
Improvement of Network Load and Fault-Tolerant of P2P DHT Systems
613
Improvement of Network/Service Resiliency with a Movable and Deployable ICT Resource Unit
614
Improvement of neural network learning algorithm and its application in control
615
Improvement of Neural Network Learning for Gesture Recognition of Game Contents Using BPN, BPNX, and LM Algorithms
616
Improvement of nickel wire bonding using Al nano coating
617
Improvement of NO removal rate by plasma reaction and Taylor cones in corona discharge reactor
618
Improvement of NOX removal efficiency using short-width pulsed power
619
Improvement of Noise Equivalent Count Rate Using Compton Kinematics in a Compton PET
620
Improvement of noise equivalent count rate using Compton kinematics in a Compton PET
621
Improvement of noise immunity level for digital on-air video broadcasting systems
622
Improvement of noise tolerance analysis in deep-submicron low voltage dynamic CMOS logic circuits
623
Improvement of NOLM-based phase-preserving amplitude limiters by fiber optimizations
624
Improvement of non volatile memory tunnel oxide robustness and integrity by design optimization of the memory cell
625
Improvement of noncoherent orthogonal coding by time overlapping
626
Improvement of Nondestructive Readout of Ferroelectric Gate FET Memory with an Intermediate Electrode by using New Data Writing and Reading Methods
627
Improvement of non-linear characteristics of multicomponent ZnO-based ceramics containing Nb2O5
628
Improvement of non-linear chirp scaling algorithm [squint SAR imaging]
629
Improvement of nonlinear diffusion equation using relaxed geometric mean filter for low PSNR images
630
Improvement of Nonlinear Distortion in an IMPATT Stable Amplifier
631
Improvement of nonlinear impedance boundary conditions
632
Improvement of non-linear mapping computation for dimensionality reduction in data visualization and classification
633
Improvement of Nonlinear Tolerance in 40 Gbit/s Transmission by Phase Modulation at 10 GHz
634
Improvement of Nonlinear-carrier Control for High-power-factor Boost Rectifiers
635
Improvement of nonlinearity correction for BES III ETOF upgrade
636
Improvement of Nonlinearity Correction for BESIII ETOF Upgrade
637
Improvement of non-negative matrix factorization based language model using exponential models
638
Improvement of Nonrepudiable Threshold Proxy Signature Scheme
639
Improvement of non-resonant perturbation measurement using S-matrix data
640
Improvement of normality and orthogonality in HEVC transform bases
641
Improvement of no-switching continuous-variable quantum key distribution system by using a practical noiseless linear amplifier
642
Improvement of novel noninvasive measurement of endothelial function: ezFMD
643
Improvement Of Novel NRLM Method For Accelerometers Characterization To The Range Of 102m/s2
644
Improvement of NOx Reduction Efficiency in Diesel Emission Using Nonthermal Plasma - Exhaust Gas Recirculation Combined Aftertreatment
645
Improvement of NRZ based 40 Gbit/s single channel and WDM transmission using pre-chirp
646
Improvement of NRZ signal transmission through phase modulation
647
Improvement of NTP time offset under the asymmetric network with double packets method
648
Improvement of n-type nc-3C-SiC:H heterojunction emitter for c-Si solar cells
649
Improvement of null zone avoidance capability for HF-band RFID using diversity combining of loop antennas
650
Improvement of nulling performance in the presence of random variations in a linear sensor array
651
Improvement of number of processing bit of a Si photonic optical serial-to-parallel converter with phase operation
652
Improvement of Numerical Accuracy in FDTD Modelling of Left-Handed Metamaterials
653
Improvement of Numerical Stability for the Computation of Transients in Lines and Cables
654
Improvement of object reference recognition through human robot alignment
655
Improvement of Object Serialization in Java Remote Method Invocation
656
Improvement of Object-Oriented System Analysis and Design with Aspects
657
Improvement of observability in poorly measured distribution networks
658
Improvement of occupational safety systems by the aplication of augmented reality technologies
659
Improvement of OCR Accuracy by Similar Character Pair Discrimination: an Approach based on Artificial Immune System
660
Improvement of odometry for omnidirectional vehicle using optical flow information
661
Improvement of Odor Approximation Using Mass Spectrometry
662
Improvement of odor approximation using mass spectrometry
663
Improvement of odor blender using electroosmotic pumps and SAW atomizer for low-volatile scents
664
Improvement of Odor Blender Using Electroosmotic Pumps and SAW Atomizer for Low-Volatile Scents
665
Improvement of odor recognition chip
666
Improvement of odor-recorder capability for dynamical change of odor
667
Improvement of offset short calibration technique in waveguide VNA measurement at millimeter and sub-millimeter wave frequency
668
Improvement of off-state breakdown voltage in power GaAs MESFETs based on an accurate simulation scheme
669
Improvement of oil industry procurement of logistics based on TCO
670
Improvement of olfactory display using solenoid valves
671
Improvement of OLSR routing protocol applied in underground coal mine
672
Improvement of Omnipage 18´s efficiency
673
Improvement of On–Off-Current Ratio in \\hbox {TiO}_{\\rm x} Active-Channel TFTs Using