بر اساس عنوان

1
Analysis of Hysteresis in Resonance-Based Position Estimation of Switched Reluctance Drives
2
Analysis of hysteresis in resonance-based position estimation of switched reluctance drives
3
Analysis of Hysteresis Losses in Synchronous Permanent Magnet Motors
4
Analysis of Hysteresis Motor Starting Torque Using Finite Element Method and Scalar Static Hysteresis Model
5
Analysis of hysteresis motor using finite element method and magnetization-dependent model
6
Analysis of hysteresis on GSM AMR Codec
7
Analysis of Hysteresis Torque in a High-Speed Induction Machine
8
Analysis of Hysteresis Width on Optical Bistability for the Realization of Optical SR Flip-Flop Using SMFP-LDs With Simultaneous Inverted and Non-Inverted Outputs
9
Analysis of hysteretic current mode switching supply without current detection
10
Analysis of I/O efficient order-statistic-based noise power estimators
11
Analysis of Ic spreads in interface engineered junctions
12
Analysis of IDDQ detectable bridges in combinational CMOS circuits
13
Analysis of IBIS model performance in simulation of simultaneous switching noise
14
Analysis of IBS for MANET Security in Emergency and Rescue Operations
15
Analysis of IC fabrication processes using self-organizing maps
16
Analysis of IC op-amp power-supply current sensing
17
Analysis of Ice Motion Vectors Determined by the Asf Gps for Seasat Sar Observations in the Beaufort Sea
18
Analysis of Ice-Covering Characteristics of China Hunan Power Grid
19
Analysis of ICG Pharmacokinetics in Cancerous Tumors using NIR Optical Methods
20
Analysis of ICI cancellation scheme in OFDM systems with phase noise
21
Analysis of ICI compensation for DVB-T2
22
Analysis of icicle growth process of composite insulator under energized condition and its impact factors
23
Analysis of icing accident in South China power grids in 2008 and it´s countermeasures
24
Analysis of ICMP policy for edge firewalls using active probing
25
Analysis of ICP variants for the registration of partially overlapping time-of-flight range images
26
Analysis of ICRF ferrite tuner
27
Analysis of ICT accessibility policy and implementation in South Korea
28
Analysis of ICT context for building conceptual understanding amongst research: A literature review
29
Analysis of ICT Integration Initiatives in Basic Education and Lessons Learned: The Case of the Philippines
30
Analysis of ICT Penetration in Iran and Middle East
31
Analysis of IDCT and motion-compensation mismatches between spatial-domain and transform-domain motion-compensated coders
32
Analysis of ideal step-recovery diode
33
Analysis of iDEN reverberation chamber for antenna measurements
34
Analysis of identified 2-D noncausal models
35
Analysis of identifying linguistic phenomena for recognizing inference in text
36
Analysis of IEC 61131-3 Compliance through PLCope XML interface
37
Analysis of IEC 61850 for a reliable communication system between substations
38
Analysis of IEEE 1588-based Cyber Physical System for micro grid automation
39
Analysis of IEEE 802.11 DCF for ad hoc networks: Saturation
40
Analysis of IEEE 802.11 in Radio over Fiber Home Networks
41
Analysis of IEEE 802.11a interference on UWB systems
42
Analysis of IEEE 802.11b wireless security for university wireless LAN design
43
Analysis of IEEE 802.11e for Delay Sensitive Traffic in Wireless LANs
44
Analysis of IEEE 802.11e for QoS support in wireless LANs
45
Analysis of IEEE 802.11e QoS in multimedia environment
46
Analysis of IEEE 802.11E Standard in Terms of Real Time Application Requirements
47
Analysis of IEEE 802.11g Standard for Communication in a Traffic Lights Distributed Control System
48
Analysis of IEEE 802.11n network Access Categories in EDCA non-saturated networks
49
Analysis of IEEE 802.11N-Like Transmission Techniques with and Without Prior CSI for Video Applications
50
Analysis of IEEE 802.15.3 CAP Based on DC-OFDM-UWB
51
Analysis of IEEE 802.15.4 Sensor Networks for Event Detection
52
Analysis of IEEE 802.15.4 Throughput in Beaconless Mode on micaZ under TinyOS 2
53
Analysis of IEEE 802.16 Mesh Mode Scheduler Performance
54
Analysis of IEEE 802.16e contention-based handover in erroneous channel
55
Analysis of IEEE 802.16m and 3GPP LTE Release 10 technologies by Russian Evaluation Group for IMT-Advanced
56
Analysis of IEEE802.11 DCF Parameters on Achievable Throughput in Ad Hoc Networks
57
Analysis of IEEE802.15.4 network performance comprehensive evaluation and prediction
58
Analysis of IEMI effects on a computer network in a realistic environment
59
Analysis of IEMI induced distortion on wireless digital data transmission links
60
Analysis of IGBT based fundamental front end regenerative motor-drive systems
61
Analysis of IGBT modules connected in series
62
Analysis of IGBT power cycling capabilities used in Doubly Fed Induction Generator wind power system
63
Analysis of IGBT Power Cycling Capabilities Used in Doubly Fed Induction Generator Wind Power System
64
Analysis of IGCT current clamp design for single phase H-bridge converters
65
Analysis of Ignition Energy Efficiency for Automotive Ignition Coils
66
Analysis of Ignition Risk on Mechanical Equipment in ATEX
67
Analysis of ignition risk to ball bearings in rotating equipment in explosive atmospheres
68
Analysis of ignitron rectifiers for reversing-mill drives
69
Analysis of ignitron switching characteristics for burst mode operation of dual and off resonance high frequency power supplies
70
Analysis of IGZO Thin-Film Transistors by XPS and Relation With Electrical Characteristics
71
Analysis of IIR Filter with NCTF-PI control for sway and trajectory motion of a DPTOC system
72
Analysis of IL6 Signal Transduction Model using Reduced Rank Regression
73
Analysis of ill-conditioned power-flow problems using voltage stability methodology
74
Analysis of ill-conditioning of multi-channel deconvolution problems
75
Analysis of illuminated bent microstrip line based on Baum-Liu-Tesche (BLT) equation
76
Analysis of ILS receiver output data and comparison to U.S. flight inspection tolerances
77
Analysis of IM with combined six-phase configuration of stator phase windings with respect to higher spatial harmonics
78
Analysis of Image Combination Methods for Conjugate Breast Scintigraphy
79
Analysis of Image Edge Checking Algorithms for the Estimation of Pear Size
80
Analysis of image frequency interference in altimeter front-end receiver
81
Analysis of image fusion and classification for high resolution SAR data on-line
82
Analysis of image fusion techniques over multispectral and microwave SAR images
83
Analysis of image informativeness measures
84
Analysis of image quality based on dentists´ perception cognitive analysis and statistical measurements of intra-oral dental radiographs
85
Analysis of Image Quality for Image Fusion via Monotonic Correlation
86
Analysis of image quality parameter of conventional and dental radiographic digital images
87
Analysis of Image Recovery Down Converter Made by Planar Circuit Mounted in a Waveguide
88
Analysis of image retrieval techniques based on content
89
Analysis of image sequences to determine rotational and translational parameters
90
Analysis of image similarity with CBIR concept using wavelet transform and threshold algorithm
91
Analysis of image steganography techniques in secure online voting
92
Analysis of image stitching error based on scale invariant feature transform and random sample consensus
93
Analysis of Image Transmission for Wireless Sensor Networks in the Mine Tunnel
94
Analysis of image-based navigation system for rotorcraft low-altitude flight
95
Analysis of image-reconstruction algorithms for circular, cone-beam CT by Hotelling observer performance on a detection task
96
Analysis of Images of Nanoparticles Obtained by Electron Transmission Microscopy Using the Two-Dimensional Hurst Operator
97
Analysis of images of radiation due to plasma-limiter interaction
98
Analysis of imaging diversity for MIMO visible light communication
99
Analysis of Imaging Spectrometer Data Using N -Dimensional Geometry and a Mixture-Tuned Matched Filtering Approach
100
Analysis of imbalance response of the rotor test bed
101
Analysis of IMC evolution and nickel plating consumption of SAC305/Ni soldering joints
102
Analysis of IMC method applied to output current control on DC/DC buck converter - a power led switching on application
103
Analysis of IMDCT fast algorithms
104
Analysis of immergence using biological signals and neural network in virtual reality environment
105
Analysis of impact factors for plug-in hybrid electric vehicles energy management
106
Analysis of impact factors of fuel-gas mixing performance for gasoline direct injection engine
107
Analysis of impact induced damage in composites for wind turbine blades
108
Analysis of Impact Mechanism of Foreign Trade on Real Economy in China
109
Analysis of impact of adjacent local loops on some significant DSL transceivers parameters
110
Analysis of impact of an annual robotics festival
111
Analysis of impact of external and internal aerial photosystem parameters on quality of aerial photos shooting polygon objects with mini-UAV
112
Analysis of impact of FPGA routing architecture parameters on area and delay
113
Analysis of impact of generating capacity constraints in Mexico´s Sistema Interconectado Nacional using equivalent assisting unit approach
114
Analysis of impact of gyroscope synthetical error on an electric-optical stabilized control system
115
Analysis of impact of hidden primary receiver on interference modeling in power, contention and hybrid control schemes
116
Analysis of impact of integer frequency offset on acquisition of PSS in LTE cellular networks
117
Analysis of impact of network activity on energy efficiency of 3GPP-LTE
118
Analysis of impact of receiver imperfections on performance of optical DQPSK systems
119
Analysis of impact of routing buffer size on TCP variants
120
Analysis of impact of self-power function on emitter turn-off thyristor
121
Analysis of impact of teacher´s personality characteristics on E-learning
122
Analysis of impact of trust on Secure Border Gateway Protocol
123
Analysis of Impact of TXOP Allocation on IEEE 802.11e EDCA under Variable Network Load
124
Analysis of impact on dynamic performance of ceramic electrical spindle from its motor air-gap
125
Analysis of impact on handset transmitter design of the high-speed data requirements in the IS-95-B CDMA wireless standard
126
Analysis of Impact on Random Packet Losses in Congestion Control: Explicit Form
127
Analysis of Impact on the Irrigation at the Irrigated Area along the Yangtze River after the Application of Three Gorges Project
128
Analysis of Impact on the Operating Speed of EMUs Which is Caused by the Decreased Catenary Voltage
129
Analysis of impact perforation images using self-organizing map
130
Analysis of impact sound waveform by answer-in-weights neural network
131
Analysis of impacts of drought on GPP in Yunnan province based on MODIS products
132
Analysis of impacts of human resource retaining innovation-oriented on enterprise performance
133
Analysis of impacts of PSS controllers and TCSC FACTS devices at dynamic stability of a multimachine system power
134
Analysis of impacts of strategic human resource management innovation-oriented on enterprise performance
135
Analysis of impacts of SVC on voltage collapse mechanism and maximum loadability
136
Analysis of impacts of various RAM on RCS of 3-D complex targets using the FEM-FMA [radar absorbing materials]
137
Analysis of Impacts on China´s Economy of 2008 Beijing Olympic Games
138
Analysis of impacts on electric power system operation of load management in residential and tertiary buildings
139
Analysis of impacts on the change of frequency band for RFID system in Brazil
140
Analysis of impaired LTP in schizophrenia using an extended mathematical model of a tripartite synapse
141
Analysis of impairments in direct conversion receivers and their effects in GMSK signaling
142
Analysis of impedance characteristics for the loop-cable position and speed detection system
143
Analysis of impedance characteristics of a novel wide-slot printed antenna using the FDTD method
144
Analysis of impedance characteristics of a probe fed rectangular cavity-backed slot antenna
145
Analysis of impedance characteristics of meander coil
146
Analysis of impedance characteristics of MV power distribution line for BPLC
147
Analysis of impedance loading in ultrasonic transducer systems
148
Analysis of impedance loading on rectangular waveguide due to aperture coupled microstrip patch radiator
149
Analysis of impedance matched circuit for wireless power transfer
150
Analysis of impedance matching control
151
Analysis of impedance matching network on LED novel driving system based on the wireless power transfer
152
Analysis of impedance matrix in transformer windings through the Finite Element Method (FEM)
153
Analysis of Impedance of Feeding Offset Cross Slots in the Broad Wall of a Rectangular Waveguide
154
Analysis of impedance relaying procedure effected by STATCOM operation
155
Analysis of impedance resonances in a spiral-element array
156
Analysis of impedance spectroscopy data: problems and new directions
157
Analysis of impedance stabilization of natural and metallic DNA molecules
158
Analysis of impedance variations of power distribution lines at communication frequencies
159
Analysis of impedance-loaded passive SAW sensor
160
Analysis of impeller geometric parameters affecting the centrifugal pump cavitation performance based on CFD simulations
161
Analysis of Impellers´ Strength in the Flat Hydrodynamic Torque Converter for Passenger Car Based on CFD
162
Analysis of imperfect CDMA closed-loop power control under Rayleigh fading
163
Analysis of imperfect chromium source in 1D atom lithography for nanometrology
164
Analysis of imperfect power control in CDMA cellular systems
165
Analysis of imperfections in N-phase high-Q band-pass filters
166
Analysis of Imperfections on Performance of 4-Phase Passive-Mixer-Based High-Q Bandpass Filters in SAW-Less Receivers
167
Analysis of imperfectly defined circuits
168
Analysis of implantation induced gratings for CWDM
169
Analysis of implementation issues for haptic interfaces using HIL concept
170
Analysis of implementation opportunities for selected conventional counter-based circuits in selected FPGA structures in terms of time performance
171
Analysis of implementation possibilities and benefits of three-level half-bridge NPC topology in static auxiliary converters for rolling stock
172
Analysis of Implementations to Secure Git for Use as an Encrypted Distributed Version Control System
173
Analysis of implementing OSEK NM with two types of ECU network
174
Analysis of implementing the electric city bus and its coordination with the grid
175
Analysis of implicit control structure in object clustering phenomena
176
Analysis of implicit parallelism in evolutionary algorithms: a stochastic version
177
Analysis of implicit transmit null-forming and channel reciprocity
178
Analysis of implicitly defined systems
179
Analysis of implosion and stagnation of stainless steel wire array z-pinches at 18MA on the Z generator
180
Analysis of impression received from reverse perspective illusion to create innovative advertising
181
Analysis of improved adiabatic pseudo-domino logic family
182
Analysis of improved cyclostationary detector with SLC diversity over Nakagami-m fading channels
183
Analysis of improved DC and AC performances of an InGaP/GaAs heterojunction bipolar transistor with a graded Al/sub x/Ga/sub 1-x/As layer at emitter/base heterojunction
184
Analysis of Improved Digital Peak Voltage Control Buck Converter with Different DPWM Modulations
185
Analysis of improved performance for a satellite-to-ground coherent optical communication system with DQPSK modulation due to phase estimation
186
Analysis of Improved Routing Algorithm in Wireless Sensor Networks
187
Analysis of Improved Shipboard Power Flow Calculation Based on Component Modeling
188
Analysis of improved switching CFAR in the presence of clutter and multiple targets
189
Analysis of improvement due to interleaving for data transmission over mobile satellite channel with trellis coded modulation system
190
Analysis of Improvement of Anti-contact Fatigue for Bearing Steel by Ion Implantation
191
Analysis of improving the detection capability of RADAR in presence of jammer by controlling radar effective temperature
192
Analysis of impulse noise based on wavelet transform for military applications
193
Analysis of impulse noise immunity standards
194
Analysis of impulse response measurements for PCS channel modelling applications
195
Analysis of impulse response of electrically large targets
196
Analysis of impulse response on walking stability by a synchronized system of two accelerometers
197
Analysis of impulse response on walking stability using accelerometers
198
Analysis of impulse train illuminated images for 2D velocity measurement
199
Analysis of impulse-radiating antennas with centered and offset TEM feed structures
200
Analysis of impulsive biological noise due to snapping shrimp as a point process in time
201
Analysis of impulsive noise and multipath effects on broadband power line communications
202
Analysis of impulsive UWB modulation on a real MV test network
203
Analysis of impulsive-smooth behavior for switched interconnections
204
Analysis of imputation algorithms for microarray gene expression data
205
Analysis of in situ reflectance spectra and performance of InGaAs/GaAsP quantum-well solar cells: Towards a comprehensive understanding of strain accumulation influence on solar cell properties
206
Analysis of in vivo 3-D internal kinematics of the joints of the foot [MRI analysis]
207
Analysis of InAlGaAs/InAlAs/InP multi-mode interference photonic switch with Mach-Zehnder interferometer for higher switching performances
208
Analysis of InAs/InP quantum dash lasers
209
Analysis of InAs-Si heterojunction double-gate tunnel FETs with vertical tunneling paths
210
Analysis of InAs-Si heterojunction nanowire tunnel FETs: Extreme confinement vs. bulk
211
Analysis of in-band crosstalk-crosstalk beat noise and obtaining Bit Error Rate in a WDM receiver
212
Analysis of in-band interference in noise-based frequency offset modulation
213
Analysis of In-Bore Magnetic Field for Railguns at Zero Speed
214
Analysis of in-building coverage system measurements in a commercial building in Malaysia
215
Analysis of incentive mechanism considering upper limit in design fee of Chinese construction projects
216
Analysis of incentive strategies of ordnance material supplier direct delivery based on stackelberg model
217
Analysis of incentives approach to renewable sources and cogeneration
218
Analysis of Incident Field Modeling and Incident/Scattered Field Calibration Techniques in Microwave Tomography
219
Analysis of incident light angles on nano-grating structure for minimizing reflection losses in GaAs solar cells
220
Analysis of incipient behaviour of multiple distribution insulators
221
Analysis of inclined microstrip patch antenna using enhanced FDTD equations
222
Analysis of inclusions at materials by metrotomography
223
Analysis of Incoherent Frequency-Shift Keyed Systems
224
Analysis of incoherent pre-RAKE TDD/DPSK/CDMA wireless portable communications
225
Analysis of incoherent scattering ion line spectra under abnormal disturbance in ionosphere region
226
Analysis of Incomplete Data in Competing Risks Model
227
Analysis of Incomplete Data in Competing Risks Model
228
Analysis of incomplete data in presence of competing risks among several groups
229
Analysis of incomplete gene expression dataset through protein-protein interaction information
230
Analysis of Incomplete, Censored Data in Competing Risks Models With Generalized Exponential Distributions
231
Analysis of inconsistency in graph-based viewpoints: a category-theoretical approach
232
Analysis of inconsistent data in power planning
233
Analysis of inconsistent data in power planning
234
Analysis of incorporating logistic testing-effort function into software reliability modeling
235
Analysis of increased correlation in blind audio watermark detection
236
Analysis of increased parallelism in FPGA implementation of neural networks for environment/noise classification and removal
237
Analysis of increasing HFHPTA´s efficiency using composite signals
238
Analysis of incremental communication for multilayer neural networks on a field programmable gate array
239
Analysis of incremental relaying protocol with RCPC in cooperative diversity systems
240
Analysis of Incrementally Generated Clusters in Biological Networks Using Graph-Theoretic Filters and Ontology Enrichment
241
Analysis of independent director’s behaviour in China’s listed companies based on evolutionary game model
242
Analysis of indeterminate contact forces in robotic grasping and contact tasks
243
Analysis of indeterminate force in multi-contact friction grasp based on potential energy minimization
244
Analysis of index-guided AlGaAs lasers with mode filter
245
Analysis of indirect matrix converter topologies in voltage step-up operation mode
246
Analysis of indirect rotor field oriented vector control for Squirrel Cage Induction Motor Drives
247
Analysis of indirect temperature-rise tests of induction machines using time stepping finite element method
248
Analysis of indirect temperature-rise tests of induction machines using time stepping finite element method
249
Analysis of Indirect Temperature-Rise Tests of Induction Machines Using Time-Stepping Finite Element Method
250
Analysis of individual and group behavior in a normal or accidental situation
251
Analysis of individual brain activation maps using hierarchical description and multiscale detection
252
Analysis of Individual Career Decision-Making Based on Partial Least-Squares Regression Model
253
Analysis of individual differences in Head-Related Transfer Functions by spectral distortion
254
Analysis of individual driving experience in autonomous and human-driven vehicles using a driving simulator
255
Analysis of individual factors in the established group E-learning
256
Analysis of individual packet loss in a finite buffer queue with heterogeneous Markov modulated arrival processes: a study of traffic burstiness and priority packet discarding
257
Analysis of Individual Pair and Aggregate Intercontact Times in Heterogeneous Opportunistic Networks
258
Analysis of individual positron emission tomography activation maps by high signal to noise ratio pixel clusters (HSC) detection
259
Analysis of Individuals´ Activity-Travel Behavior Based on a Structural Equation Model
260
Analysis of indoor environments by range images
261
Analysis of indoor FSO link under diffused channel topology
262
Analysis of Indoor Multiple-Input Multiple-Output Coherent Optical Wireless Systems
263
Analysis of indoor occupant contaminants under the isothermal dual-airflow window ventilation
264
Analysis of Indoor PLC Networks: Laboratory Tests and Simulation Results
265
Analysis of Indoor Positioning Approaches Based on Active RFID
266
Analysis of indoor radio propagation and wideband digital transmission characteristics based on the equivalent transmission-path model with ray tracing
267
Analysis of indoor thermal environment and heat loss of radiant floor heating system
268
Analysis of indoor-indoor and satellite/HAP indoor propagation effects
269
Analysis of induced current density in ellipsoidal human model exposed to concurrent ELF electric and magnetic fields with phase differences
270
Analysis of induced current density in spherical conductive model exposed simultaneously to extremely low frequency electric and magnetic fields
271
Analysis of Induced Currents on a Thin Wire Located Symmetrically Inside a Cylinder
272
Analysis of induced electric field in human body by ELF magnetic field using parallel FMM accelerated BEM
273
Analysis of induced electric field in human body by utility power frequency magnetic field using parallel fast multipole-accelerated boundary element method
274
Analysis of induced electromagnetic perturbations in electrical and telecommunication cables due to lightning currents
275
Analysis of induced EMF and torque waveforms in a brushless permanent magnet machine
276
Analysis of induced EMF waveforms and torque ripple in a brushless permanent magnet machine
277
Analysis of induced surface currents on high velocity target using a relativistic approach
278
Analysis of induced voltage for ferrohydrodynamic energy harvester using sloshing motion
279
Analysis of induced voltage in metal shield of power cable and research on its restraining technology based on asymmetric state
280
Analysis of Inductance Calculation of Coaxial Circular Coils With Rectangular Cross Section Using Inverse Hyperbolic Functions
281
Analysis of Inductance Characteristics in Interior Permanent Magnet Synchronous Motor Considering Inductance Variation
282
Analysis of inductance coefficients in multistrand cables: analytical, numerical, and experimental results
283
Analysis of inductance variation in permanent magnet linear synchronous motor
284
Analysis of induction generator controller techniques for Pico hydropower a case study of A 3kW Pico hydropower scheme in Kasese, Western Uganda
285
Analysis of induction generators and advanced power electronic converters for wind energy conversion technology
286
Analysis of induction heating eddy current distribution based on 3D FEM
287
Analysis of induction heating with the structure of transformer
288
Analysis of induction machine slot harmonics in the TF domain
289
Analysis of induction machine T and Γ circuit coequality for use in electric drive controllers
290
Analysis of Induction Machines in Dynamic Systems
291
Analysis of induction machines under rotor end-ring faults
292
Analysis of Induction Motor Cascading Stall in a Simple System Based on the CASCADE Model
293
Analysis of Induction Motor Drive Losses in the Field-Weakening Region
294
Analysis of induction motor drives under sensor faults with mine hoist load diagram
295
Analysis of Induction Motor Drives with a Nonsinusoidal Supply Voltage Using Fourier Analysis
296
Analysis of induction motor for electric vehicle application based on drive cycle analysis
297
Analysis of induction motor operated with raised sine ware power supply
298
Analysis of Induction Motor Subjected to Nonsinusoidal Voltages Containing Subharmonics
299
Analysis of Induction Motor Using Field-Circuit Coupled Time-Periodic Finite Element Method Taking Account of Hysteresis
300
Analysis of induction motor with broken rotor bars using finite element method
301
Analysis of Induction Motors with Asymmetric Windings
302
Analysis of Induction Motors with Asymmetric Windings
303
Analysis of induction responses from metal objects using the method of auxiliary sources
304
Analysis of induction skull melting furnace by edge finite element method excited from voltage source
305
Analysis of induction-type coilgun performance based on cylindrical current sheet model
306
Analysis of inductive coil gun performance based on field coupling circuit method
307
Analysis of inductive coupling coils for extending distances of efficient wireless power transmission
308
Analysis of inductive coupling disturbances in hybrid integrated power electronic module
309
Analysis of Inductive Dielectric Posts in Rectangular Waveguide
310
Analysis of inductive multiport microwave devices employing a novel double parallel plate approach
311
Analysis of inductive power link for efficient wireless power transfer
312
Analysis of inductive power transfer systems for variable air gap and voltage supply frequency
313
Analysis of inductive powering harvesting circuit
314
Analysis of inductive resonant coupled WPT system using Reflected Load Theory
315
Analysis of inductively coupled RFID marker localization methods
316
Analysis of inductively driven liners for the generation of megagauss magnetic fields
317
Analysis of Inductor Current Sharing in Nonisolated and Isolated Multiphase dc–dc Converters
318
Analysis of inductor-converter bridge by means of state-space averaging technique (superconducting magnet energy storage)
319
Analysis of Inductor-Current of Boost DC-DC Converters and Its Design for Intrinsic Safety
320
Analysis of Inductorless Zero-Voltage-Switching Piezoelectric Transformer-Based Converters
321
Analysis of Industrial Cluster´s Profit Based on the Cluster´s Production Load Balance
322
Analysis of Industrial Clusters´ Formation Based on Entrepreneurs´ Behavior
323
Analysis of Industrial Control Systems Traffic Based on Time Series
324
Analysis of industrial ethernet´s reliability and realtime performance
325
Analysis of industrial microgrid power curves based on the theory of stochastic variables for control system development and component sizing
326
Analysis of industrial systems using the self-organizing map
327
Analysis of industrial waste for energy generation with reference to Uttarakhand, India: Waste as a potential energy weapon
328
Analysis of Industrial Water Conservation Potential
329
Analysis of industry differences in information systems growth of enterprises in northeast old industrial base
330
Analysis of industuial competetive power of high-tech industry of Baoding national hign-tech zone
331
Analysis of inelastic interactions for therapeutic proton beams using Monte Carlo simulation
332
Analysis of inertia dyadic uncertainty for small agile satellite with control moment gyros
333
Analysis of inertial confinement fusion by using light ion beam
334
Analysis of inertial motion in swing phase of human gait and its application to motion generation of transfemoral prosthesis
335
Analysis of Inertial Navigation System errors from van testing using an optimal Kalman filter/smoother
336
Analysis of infinite and finite arrays of tapered-slot antennas for SKA
337
Analysis of infinite arrays of aperture coupled patch elements via a space domain mixed potential integral equation
338
Analysis of infinite arrays of microstrip-fed dipoles printed on protruding dielectric substrates and covered with a dielectric radome
339
Analysis of infinite arrays of one- and two-probe-fed circular patches
340
Analysis of infinite arrays of printed dipoles on dielectric sheets perpendicular to a ground plane
341
Analysis of infinite arrays of probe-fed rectangular microstrip patches using a rigorous feed model
342
Analysis of infinite arrays of substrate-supported metal strip antennas
343
Analysis of infinite loops using S-formulas
344
Analysis of infinite periodic array of thin wire radiators with dielectric loading
345
Analysis of infinite phased array antennas with Gaussian excitation weightings
346
Analysis of Infinite Phased Array of Aperture Coupled Circular Microstrip Patch Antennas
347
Analysis of infinite zig-zag antenna
348
Analysis of Inflection Points for Planar Cubic Bezier Curve
349
Analysis of influence an inlinear field transistor with the barrier an shotki on the mechanism of multiplying of frequency
350
Analysis of influence factors for FEA-based cross-magnetic gear transmission performance
351
Analysis of Influence factors for Weigh-in-motion
352
Analysis of influence factors of corporate technology innovation based on interpretative structural model
353
Analysis of Influence Factors of Logistics Development in Henan Province Based on DEMATEL Method
354
Analysis of influence factors of the popularization of green buildings based on fuzzy DEMATEL method
355
Analysis of Influence Factors on Mobile Service Value - A Case Study of Mobile Phone TV
356
Analysis of Influence Factors on Sludge Wall Slip
357
Analysis of Influence Factors on the Air Environment in Underground Space
358
Analysis of influence factors on ubiquitous evaluation software — As an example of China
359
Analysis of Influence for Social Engineering in Information Security Grade Test
360
Analysis of influence of annealing parameters on electrical resistance of printed electronics elements
361
Analysis of Influence of Aperture Finiteness on Wideband Signals of Microwave Introscopy using Plane Wave Decomposition
362
Analysis of influence of array plane error on performances of hexagonal phased array antennas
363
Analysis of influence of corporate culture on commercial banks
364
Analysis of Influence of DAC on Total Harmonic Distortion in Digital Waveform Synthesis
365
Analysis of influence of Doppler frequency shift on effectiveness of phase-shift keyed signal compression
366
Analysis of influence of excavation of foundation pits on existing metro tunnels
367
Analysis of Influence of Internalization on Geological Scientific and Technological Work in China
368
Analysis of Influence of Leakage in a Branch Pipeline on Pipeline Network Running Characteristics
369
Analysis of influence of load characteristics on distribution system modeling
370
Analysis of Influence of Magnetic Fields on the Redistribution of Dissolved Oxygen
371
Analysis of influence of model parameters on applications of Duncan-Chang nonlinear elastic model
372
Analysis of influence of noise on the quality of shadow tomogram reconstruction via preliminary projection filtering
373
Analysis of influence of quantization noise of digital receiver on quality of useful signal reception. novosibirsk
374
Analysis of Influence of Steering System on Vehicle Straight Line
375
Analysis of influence of thermal and voltage treatments on silicone/mica electrical insulation by FT-IR ATR
376
Analysis of Influence of Tire Pressure on Polygonal Wear of Tire
377
Analysis of influence of uncorrelated additive non-Gaussian noise on accuracy of motion parameters measurement in short-range radio systems
378
Analysis of influence of vehicle bodyshell on the characteristics of wire antennas using a new MoM-based EM/EMC solver
379
Analysis of influence on back-EMF based sensorless control of PMSM due to parameter variations and measurement errors
380
Analysis of Influence on Intercepting Effectiveness of Fighter by the Radio Navigation System
381
Analysis of Influence on Suspended Solids of Sewage to Running of Moderate Opposite Angled Flap Anaerobic Baffled Reactor
382
Analysis of influence parameters on image quality in ultrasound examinations
383
Analysis of influence thermographic diagnostic controls in increasing the reliability of computer systems
384
Analysis of influences from exchange rate to pricing of China steel industry
385
Analysis of influences of dielectric and electrical properties on particle charging
386
Analysis of Influences of Technological Progress on Employment
387
Analysis of Influencing Factor on Household Financial Assets: The Case of Beijing
388
Analysis of influencing factor on supply of micro-lending guaranteed based on dummy variables
389
Analysis of influencing factors and mechanism for repurchase price in BT project
390
Analysis of influencing factors for phase referencing technique in deep space navigation
391
Analysis of influencing factors for TCP throughput
392
Analysis of influencing factors for the grey multi-attribute group decision making
393
Analysis of influencing factors in real estate prices based on stochastic gradient regression model
394
Analysis of influencing factors in the model of erroneous action: Computer-based method and algorithms
395
Analysis of influencing factors of building energy efficiency based on DEMATEL method
396
Analysis of Influencing Factors of Electricity Price Chain Based on Interpretative Structural Modeling
397
Analysis of Influencing Factors of Heat Transfer Performance of Heat Pipe Heat Exchanger
398
Analysis of influencing factors of IPO underpricing based on rough set and support vector machine
399
Analysis of influencing factors of iron and steel enterprise environmental information disclosure in China
400
Analysis of influencing factors of short circuit ratio of multi-infeed AC/DC power systems
401
Analysis of influencing factors of the non-chrome chemical conversion film in aluminum surface
402
Analysis of influencing factors on doctor´s prescription behavior in China
403
Analysis of influencing factors on graduate students´ achievements in scientific research
404
Analysis of influencing factors on housing price in Chengdu based on factor-analysis method
405
Analysis of influencing factors on performance evaluation of agricultural products network marketing based on AHM
406
Analysis of influencing factors on performance measurement of the supply chain based on SCOR-model and AHM
407
Analysis of Influencing Factors on Rural Surplus Labor Transfer in China
408
Analysis of Influencing Factors on Stress Path in Soil Element of Ground under Moving Load
409
Analysis of Influencing Factors on the Development of Retail E-commerce in China
410
Analysis of influencing factors on the enterprise TMT strategic decision-making from the perspective of mechanics
411
Analysis of Influencing Factors on the Management Performance of Expressway Construction Project Based on DEMATEL Method
412
Analysis of influencing factors to the maintenance quality of the aviation equipment based on interpretative structural modeling
413
Analysis of influencing factors using GRAPPA algorithm for image reconstruction
414
Analysis of influential factors in determining adhesive strength of ACF joints
415
Analysis of influential factors in determining Very Fast Transient Overvoltages of GIS substations
416
Analysis of influential factors on the underground cable ampacity
417
Analysis of Influential Features for Information Diffusion
418
Analysis of information and communication needs in rural primary health care in developing countries
419
Analysis of information and communication Technology Development Index (IDI) in Middle East countries
420
Analysis of Information and Power Transfer in Wireless Communications
421
Analysis of information contained at correlation treatment of the reflected from the radar target signals received by system of two radars with small base workings on different frequencies
422
Analysis of information content of pharmacokinetic data using generalized sensitivity functions
423
Analysis of information diffusion in dynamic information networks
424
Analysis of Information Dissemination in Vehicular Ad-Hoc Networks With Application to Cooperative Vehicle Safety Systems
425
Analysis of information exchange time probability characteristics in low earth orbit communication networks with various variants of address-routing database organization
426
Analysis of information flow control in military supply chain management
427
Analysis of information flows at interfaces between strategic product planning, product development and production planning to support process management - A literature based approach
428
Analysis of information fusion combining rules under the dsm theory using ESM inputs
429
Analysis of Information Quality in Event Triggered Smart Grid Control
430
Analysis of Information Reconciliation in Secret Key Agreement from the AWGN Channel
431
Analysis of information relay processing in inter-vehicle communication: A novel visit
432
Analysis of information security through asset management in academic institutes of Pakistan
433
Analysis of information society indicators with time distance methodology
434
Analysis of information streams management algorithms in low earth orbit data transfer networks satellite-to-satellite links
435
Analysis of Information Technology Evolution: An Entropy Tree Perspective
436
Analysis of information technology implementation barriers and coping strategies in Chinese construction enterprises
437
Analysis of information transmission in GEO+IGSO+MEO constellation
438
Analysis of informational and technological requirements for the respiratory therapy workshops in Peru
439
Analysis of Information-Guided Transmit Antenna Selection for Security Enhancement
440
Analysis of Informatization Construction in Coal Enterprise Based on SaaS
441
Analysis of infrared character of the temperature stratification sea surface disturbed by the propeller
442
Analysis of infrared emission in accordance with driving frequency and discharge gap by using three-dimensional plasma display panel
443
Analysis of infrared polarization signatures for backgrounds and objects
444
Analysis of infrared spectrum characteristic and variation trend of SF6 PD decomposition
445
Analysis of Infrared Thermal Wave Nondestructive Testing On Flat Bottom Hole Sample by the Finite Element Method
446
Analysis of infrared wireless links employing multibeam transmitters and imaging diversity receivers
447
Analysis of infrared wireless links employing multi-beam transmitters and imaging diversity receivers
448
Analysis of infrasound noise emitted by high power wind turbine with asynchronous generator for selected resonant and median frequencies
449
Analysis of infrasound noise emitted by high-power wind turbine with synchronous generator
450
Analysis of infrastructure and electric power services from ESS solutions
451
Analysis of InGaAs p-i-n photodiode frequency response
452
Analysis of InGaAs/InP Single-Photon Avalanche Diodes With the Multiplication Width Variation
453
Analysis of InGaN/GaN VCSELs
454
Analysis of inherent limitations in localizing step-like singularities in a continuous signal
455
Analysis of Inherent Magnetic Position Sensors in Symmetric AC Machines for Zero or Low Speed Sensorless Drives
456
Analysis of inheritance and multiple inheritance
457
Analysis of inhomogeneous and anisotropic waveguides by the finite element method
458
Analysis of inhomogeneous broadband circulators by means of a mixed numerical method
459
Analysis of inhomogeneous chiral slab using Taylor´s series expansion
460
Analysis of inhomogeneous multilayer antenna structure by hybrid method
461
Analysis of inhomogeneous stress distribution in surface acoustic wave resonator
462
Analysis of Inhomogeneous Stress Distribution in the Piezoelectric Ceramics of Unimorph Cantilever for Energy Harvesting
463
Analysis of inhomogeneously dielectric filled cavities coupled to dielectric-loaded waveguides: application to the study of NRD-guide components
464
Analysis of inhomogeneously filled cavities by vector finite element method
465
Analysis of inhomogeneously filled cavities coupled to waveguides using the VIE formulation
466
Analysis of inhomogeneously filled stripline and microstripline
467
Analysis of inhomogeneously filled waveguide devices by a hybrid mode matching-finite element technique
468
Analysis of inhomogeneously filled waveguides using a bi-orthonormal-basis method
469
Analysis of inifinite phased arrays of printed dipoles
470
Analysis of initial stage of plasma discharge in tokamaks: mathematical model formulation, simulation results, comparison with experiments
471
Analysis of initialization and numerical instability of fast RLS algorithms
472
Analysis of injected apparent power and flicker in a distribution network after wind power plant connection
473
Analysis of injection capabilities and media access of IEEE 802.11 hardware in monitor mode
474
Analysis Of Injection Current Through Thin Gate Oxide During Metal Etch
475
Analysis of injection current with electron temperature for high-K gate stacks
476
Analysis of injection locking in pulsed dye laser systems
477
Analysis of Injection Molding of Thin-Walled Parts Based on Moldflow
478
Analysis of Injection Pulling in Phase-Locked Loops With a New Modeling Technique
479
Analysis of injection-locked antenna array
480
Analysis of injection-locked antenna array including mutual coupling effects
481
Analysis of injection-locked gain-guided diode laser arrays
482
Analysis of injection-locked pulsed waveform oscillators
483
Analysis of Injection-Locking Bistable Laser Diode with Frequency Chirping
484
Analysis of ink transfer process for R2R printing applications with non-Newtonian ink property
485
Analysis of in-line soliton control through two-wavelength nonlinear loop mirror amplitude/phase modulator
486
Analysis of in-loop denoising in lossy transform coding
487
Analysis of inner fields and aperture illumination of an oversize rectangular slotted waveguide
488
Analysis of inner-pulse Doppler effect for the echoes of inverse synthetic aperture LADAR
489
Analysis of innovation behavior impact based on repeated game
490
Analysis of innovative design variations for double-sided coreless-stator axial-flux permanent-magnet generators in micro-wind power applications
491
Analysis of Innovative HVDC Control
492
Analysis of innovative technology diffusion dynamic model of high-tech enterprise
493
Analysis of InP/GaAsSb DHBT failure mechanisms under accelerated aging tests
494
Analysis of InP/InGaAs double heterostructure bipolar transistors for high frequency applications
495
Analysis of InP/InGaAs single and double heterostructure bipolar transistors for simultaneous high speed and high breakdown operation
496
Analysis of input and output configurations for use in four-valued CCD programmable logic arrays
497
Analysis of input and output queueing for nonblocking ATM switches
498
Analysis Of Input Current Of Phase-Shift Controlled Ac-ac Converters
499
Analysis of input factors to operations and maintenance of two offshore wind farm case studies; a screening process
500
Analysis of input filter interactions in cascade buck converters
501
Analysis of input filter interactions in switching power converters
502
Analysis of Input Filter Interactions in Switching Power Converters
503
Analysis of Input Impedance and Mutual Coupling of Microstrip Antennas on Multilayered Circular Cylinders Using Closed-Form Green´s Function Representations
504
Analysis of input power dynamic ranges in two types of expanded semiconductor optical amplifier gate switch arrays
505
Analysis of input shaping and PID-controller interaction structures for two-mass systems
506
Analysis of input to state stability for discrete time nonlinear systems via dynamic programming
507
Analysis of Input Variable´s Influence on Control Condition in Automatic Test
508
Analysis of input vector space for speeding up learning in feedforward neural networks
509
Analysis of input-output characteristics of boundary value linear systems
510
Analysis of input-output clustering for determining centers of RBFN
511
Analysis of input-polarization-induced phase noise in interferometric fiber-optic sensors and its reduction using polarization scrambling
512
Analysis of inrush and fault currents measurement errors generated by the current transformer saturation
513
Analysis of inrush current and over-voltage with HVDC AC filters switching on
514
Analysis of inrush currents for DC powered IT equipment
515
Analysis of INS Aided Signal Acquisition Based on Navigation Satellites Software Receivers
516
Analysis of insertion force of electric connector based on FEM
517
Analysis of Insertion Loss and Impedance Compatibility of Hybrid EMI Filter Based on Equivalent Circuit Model
518
Analysis of insertion loss repeatability of coaxial connectors
519
Analysis of in-service aged stator bars
520
Analysis of In-Situ Fission Rate Measurements Using ^4{\\rm He} Gas Scintillation Detectors
521
Analysis of In-situ Microscopic Organism Behavior in Data Acquired Using a Free-drifting Submersible Holographic Imaging System
522
Analysis of inspection-based preventive maintenance in operational software systems
523
Analysis of instabilities in piezoelectric transformers driving cold cathode fluorescent lamps
524
Analysis of instability and response of reactors with rectangular hysteresis loop core material in series with capacitors
525
Analysis of Instability in Electrical Machines
526
Analysis of instability in feedforward loop
527
Analysis of instability of compressed signals parameters in radar systems
528
Analysis of instability of direct powered DC-compound machines in pitch systems of large wind turbines
529
Analysis of Instantaneous Amplitude and Frequency of Intracranial EEG signal to Characterize Epileptic Seizure Stages
530
Analysis of instantaneous current and power using space switching functions
531
Analysis of instantaneous F0 contours from two speakers mixed signal using zero frequency filtering
532
Analysis of instantaneous NSV&C in polyphase systems
533
Analysis of Instantaneous Power Distributions for Non-Regenerative and Regenerative Relaying Signals
534
Analysis of Instantaneous Representative Active Power Equality based Control Method for Three Phase Shunt Active Power Filter
535
Analysis of instantaneous synchrony during seizures
536
Analysis of institutional factors influencing the service innovation - a case of chinese software industry
537
Analysis of instruction-level vulnerability to dynamic voltage and temperature variations
538
Analysis of instrumentation performance for distributed real-time air quality monitoring
539
Analysis of Insular Guide Launcher Radiation Loss and Comparison with Microstrip Counterparts
540
Analysis of insulated gate transistor turn-off characteristics
541
Analysis of insulating oil to evaluate the condition of power transformer
542
Analysis of insulating state on transformer model using PDC method
543
Analysis of Insulation Characteristics of Coconut Oil as an Alternative to the Liquid Insulation of Power Transformers
544
Analysis of insulation characteristics of low-voltage induction motor driven by IGBT PWM inverter
545
Analysis of insulation characteristics of PWM inverter-fed induction motors
546
Analysis of insulation coordination for dual motion mechanism gas circuit breaker
547
Analysis of Insulation Degradation in Epoxy Insulators Using Finite Element Method
548
Analysis of insulation degradation in Insulators using Partial Discharge analysis
549
Analysis of insulation diagnosis and failure in stator windings of air-cooled gas turbine generator
550
Analysis of insulation failure modes in high power IGBT modules
551
Analysis of insulator surface charging due to charge injection and secondary electron emission in vacuum
552
Analysis of Insurance Contract with the Auditing Efforts
553
Analysis of Intake and Discharge Salinity Regimes for a Desalination Plant
554
Analysis of intangible factors in waste minimization projects
555
Analysis of integral method for fault detection in transformers
556
Analysis Of Integral Method For Fault Detection In Transformers
557
Analysis of integral non-linearity errors in two-step analogue-to-digital converters
558
Analysis of integral snubber circuit design for transformers in urban high rise office building
559
Analysis of integrated antenna positions on a laptop computer for mobile data communication
560
Analysis of integrated boost-flyback step-up converter
561
Analysis of integrated buck-flyback ZVS converter
562
Analysis of Integrated Circuit Failure Modes and Failure Mechanisms Derived from High Temperature Operating Life Tests
563
Analysis of Integrated Circuit System s by An Innovative Wavelet-Based Scattering Matrix Approach
564
Analysis of integrated dielectric waveguides using orthonormal wavelet expansions
565
Analysis of integrated inverted-F antennas for Bluetooth applications
566
Analysis of integrated millimeter-wave and submillimeter-wave waveguides using orthonormal wavelet expansions
567
Analysis of integrated mode-locked semiconductor lasers: spectral domain approach
568
Analysis of integrated monitoring of HV electrical equipment in power system
569
Analysis of integrated optical corner reflectors using a finite-difference beam propagation method
570
Analysis of integrated optical waveguide mirrors
571
Analysis of integrated optics parametric oscillators
572
Analysis of integrated optoelectronic laser-diode-based microwave and millimetre-wave frequency mixers
573
Analysis of integrated optofluidic lab-on-a-chip fluorescence biosensor based on transmittance of light through a fluidic gap
574
Analysis of Integrated Optofluidic Lab-on-a-Chip Sensor Based on Refractive Index and Absorbance Sensing
575
Analysis of integrated quantum-well infrared photodetector and light-emitting diode for implementing pixelless imaging devices
576
Analysis of integrated services TDM with correlated traffic
577
Analysis of integrated slot-type tag antennas for passive UHF RFID
578
Analysis of Integrated Solenoid Inductor With Closed Magnetic Core
579
Analysis of Integrated Starter-Generator Operation in the Starter Mode on a Mathematical Model
580
Analysis of Integrated Starter-Generator Operation on a Mathematical Model
581
Analysis of integrated storage and grid interfaced photovoltaic system via nine-switch three-level inverter
582
Analysis of integrated voice and data for GPRS
583
Analysis of Integrated Voice/Data Multiplexing
584
Analysis of integrated water vapor and cloud liquid water measured by multi-frequency microwave radiometer
585
Analysis of integrated waveguide slot array antennas
586
Analysis of integrated wind farm using a multiterminal VSC-HVDC: Different electrical conditions response
587
Analysis of integrated wind power cost based on Dynamic Economic Dispatch
588
Analysis of integrated-optics near 3 dB coupler and Mach-Zehnder interferometric modulator using four-port scattering matrix
589
Analysis of Integrated-Optics Near 3 dB Coupler and Mach-Zehnder Interferometric Modulator Using Four-Port Scattering Matrix
590
Analysis of integration gain in passive radar
591
Analysis of integration of remote laboratories for renewable energy courses at Jordan universities
592
Analysis of Integrator Nonlinearity in a Class of Continuous-Time Delta–Sigma Modulators
593
Analysis of integrity policies using soft constraints
594
Analysis of Integrity Vulnerabilities and a Non-repudiation Protocol for Cloud Data Storage Platforms
595
Analysis of intelligent paging in personal communication systems
596
Analysis of intelligent transport system with optical vehicle-to-vehicle communication
597
Analysis of intelligent Wide Area System-Centric Controller and Observer for power system stabilization using DHP control architecture
598
Analysis of INTELSAT-V scintillation data
599
Analysis of Intense, Subnanosecond Electrical Pulse-Induced Transmembrane Voltage in Spheroidal Cells With Arbitrary Orientation
600
Analysis of Intensity and Frequency Noises in Semiconductor Optical Amplifier
601
Analysis of intensity fluctuations in a junction laser with low quantum-efficiency regions
602
Analysis of intensity interference caused by cross-phase modulation in dispersive optical fibers
603
Analysis of intensity of singularity at a vertex in 3D transversely isotropic piezoelectric bimaterial joints by Boundary Element Method
604
Analysis of intentional human deviated behaviour: an experimental study
605
Analysis of interacting resonant structures in fin lines
606
Analysis of interaction attitudes using data-driven hand gesture phrases
607
Analysis of interaction between ancillary service markets and energy market using power market simulator
608
Analysis of interaction between microwave antennas and frequency selective surface (FSS) radomes
609
Analysis of interaction between players in a cooperative music performance
610
Analysis of interaction between stretched pulses propagating in dispersion-managed fibers
611
Analysis of interaction between therapist and hemiplegic patient for control of lateral pelvic motion during robotic gait training
612
Analysis of interaction between two SAW modes in Pt grating on langasite cut (0°, 138.5°, 26.6°)
613
Analysis of interaction force of wire-based robot using variable wire rope tension control
614
Analysis of interaction in musical communication and its modeling
615
Analysis of interaction of gamma rays in crystals with 256ch parallel readout FP-PMT
616
Analysis of Interaction of Multiple SVC Controllers Based on Modal Series Method
617
Analysis of interaction patterns and scaffolding practices in online discussion forums
618
Analysis of Interaction Structure Among Multiple Functional Process Variables for Process Control in Semiconductor Manufacturing
619
Analysis of interaction structure for ka-band GYRO-TWT
620
Analysis of interaction user interface patterns and usability study in computer assisted instruction for Tablet PC
621
Analysis of Interactions Among Two Tropical Depressions and Typhoons Tembin and Bolaven (2012) in Pacific Ocean by Using Satellite Cloud Images
622
Analysis of Interactions Between Central and Vagal Respiratory Control Mechanisms in Cats
623
Analysis of interactions between heart rate and blood pressure in chronic hypertensive pregnancy
624
Analysis of interactions between Internet data traffic characteristics and Coordinated Multipoint transmission schemes
625
Analysis of interactions between node induced crosstalk and fiber nonlinearities in optical metropolitan area networks
626
Analysis of interactions in a collaborative learning session of instant messaging
627
Analysis of interactions in MIMO Takagi-Sugeno fuzzy models
628
Analysis of Interactions on Coordination for Design Projects
629
Analysis of Interactions using Structured Singular Values
630
Analysis of Interactive Effect between the Port and the Hinterland Based on Logistic Model
631
Analysis of interannual changes in northern vegetation activity observed in AVHRR data from 1981 to 1994
632
Analysis of inter-area mode oscillations using intelligent system-centric controllers
633
Analysis of inter-area oscillations in power systems using Adomian-Pade approximation method
634
Analysis of interarea oscillations in the European electric power system in synchronous parallel operation with the Central-European networks
635
Analysis of Interarea Oscillations Including Governor Effects and Stabilizer Design in South-Eastern Europe
636
Analysis of inter-area oscillations using timevarying one-machine infinite bus equivalents
637
Analysis of inter-atrium differences in paroxysmal and persistent atrial fibrillation using principal component analysis
638
Analysis of Interbanking Systemic Risk Contagion - Case from Finland Bank System
639
Analysis of inter-bundle crosstalk in multimode signaling for high-density interconnects
640
Analysis of intercarrier and interblock interferences in wireless OFDM systems
641
Analysis of inter-cell interference and crosstalk in carrier allocation based visible light communication
642
Analysis of Intercell interference coordination by Fractional frequency reuse in LTE
643
Analysis of Intercellular Timeslot Allocation in Self-Organising Wireless Networks
644
Analysis of interchannel crosstalk in a dispersion-managed analog transmission link
645
Analysis of interchannel crosstalk in a dispersion-managed analog transmission link
646
Analysis of inter-channel crosstalk in multi-mode parallel optical waveguide using Beam Propagation Method
647
Analysis of interconnect and package structures using PEEC models with radiated emissions
648
Analysis of interconnect crosstalk defect coverage of test sets
649
Analysis of interconnect delay for 0.18 μm technology and beyond
650
Analysis of interconnect networks using complex frequency hopping (CFH)
651
Analysis of interconnect networks with conducting wedge loaded by an inhomogeneous dielectric substrate
652
Analysis of interconnect sensitivity to process variation in 90nm
653
Analysis of interconnected configuration in PV arrays under fault condition
654
Analysis of interconnected CSMA/CD LANs
655
Analysis of Interconnected Distribution Feeders Under Unbalanced Operation Conditions Using OrCAD PSpice
656
Analysis of interconnected earthing systems of MV/LV substations in urban areas
657
Analysis of interconnected lumped distributed multi-branch multi-stage networks
658
Analysis of Interconnected Oscillators by Dissipativity Theory
659
Analysis of Interconnection Behavior and Internet Backbone Providers on Regulatory Policy
660
Analysis of interconnection between HVDC transmission with capacitor commutated converter and AC power transmission system
661
Analysis of Interconnection Delay on Very High-Speed LSI/VLSI Chips Using an MIS Microstrip Line Model
662
Analysis of interconnection delay on very high-speed LSI/VLSI chips using an MIS microstrip line model
663
Analysis of Interconnection Networks and Mismatch in the Nose-to-Nose Calibration
664
Analysis of Interconnection Networks Based on Cayley Graphs of Strong Generating Sets
665
Analysis of interconnection networks based on simple Cayley coset graphs
666
Analysis of interconnection networks in heterogeneous multi-cluster systems
667
Analysis of interconnection of photovoltaic distributed generation
668
Analysis of interconnection operation of a radial feeder with a cogeneration plant
669
Analysis of interconnection reliability of dielectric layer for wafer level chip scale package
670
Analysis of interconnection substations for sewave power farms
671
Analysis of interconnections with BCB for high-speed digital applications
672
Analysis of interconnects in huge frequency ranges with a 3-D superficial integral formulation
673
Analysis of interconnects with frequency-dependent parameters by differential quadrature method
674
Analysis of inter-core crosstalk in homogeneous multi-core two-mode fiber under bent condition
675
Analysis of intercostal effect on dual gridded reflectors
676
Analysis of intercrossed open-source software repositories data in GitHub
677
Analysis of interdeparture processes for bursty traffic in ATM networks
678
Analysis of Interdiffused InGaN Quantum Wells for Visible Light-Emitting Diodes
679
Analysis of Interdigital Surface Wave Transducers by Use of an Equivalent Circuit Model
680
Analysis of Interdigital Transducers
681
Analysis of interdigitated back contact silicon solar cells for space use
682
Analysis of inter-domain collaborative routing: provider competition for clients
683
Analysis of Interdomain Smart Routing and Traffic Engineering Interactions
684
Analysis of inter-element mutual coupling in wireless antenna array using finite difference time domain method
685
Analysis of Interface Fracture on Piping Welded Joint with Continuous Material Properties
686
Analysis of interface state induced performance variation in LDD MOSFET´s
687
Analysis of Interface Vocabulary and Users´ Understanding in Integrated Iranian Library Software
688
Analysis of interface-trap effects in inversion-type InGaAs/ZrO2 MOSFETs
689
Analysis of interfacial crack problems in three-dimensional magneto-electro-elastic bimaterials using hypersingular integral-differential equation method
690
Analysis of interfacial delamination in IC packaging: Use stress or fracture mechanics?
691
Analysis of interfacial metal Migration into dielectric materials subjected to high voltage stress
692
Analysis of interference alignment for wireless communication with external interference
693
Analysis of interference between terrestrial and satellite systems in the Band 17.7 to 19.7 GHz
694
Analysis of interference cancellation for a multicellular CDMA environment
695
Analysis of interference cancellation using adaptive notch filters for multiple interferers
696
Analysis of Interference Current for High-Voltage Arresters Based on Resistance–Capacitance Network
697
Analysis of interference effect on signal acquisition and tracking of GPS receiver
698
Analysis of Interference Effects between Co-Existent 802.11b and 802.11g Wi-Fi Systems
699
Analysis of interference effects between LTE user terminals
700
Analysis of Interference Effects in MB-OFDM UWB Systems
701
Analysis of interference effects on monopulse radars
702
Analysis of Interference from Cellular mobile communication to Digital terrestrial broadcast television system
703
Analysis of interference from digital Terrestrial Television Broadcast to LTE TDD in Digital Dividend spectrum
704
Analysis of Interference from Large Clusters as Modeled by the Sum of Many Correlated Lognormals
705
Analysis of interference from UWB radar signals on a digital OFDM transmission system
706
Analysis of interference from wireless traffic light controller upon remote keyless entry for vehicles
707
Analysis of interference impacts by ultra-wideband system to portable Internet service
708
Analysis of interference in a wireless link with frequency hopping
709
Analysis of Interference in Air-to-Ground CDMA Cellular Systems Under Idealized Assumptions
710
Analysis of interference in cognitive radio networks with unknown primary behavior
711
Analysis of interference issues in Integrated Satellite and Terrestrial Mobile Systems
712
Analysis of interference modeling and coexistence for next-generation LTE cellular systems
713
Analysis of interference on DS-UWB system in AWGN channel
714
Analysis of interference photocathodes
715
Analysis of interference rejection in period-to-code converters
716
Analysis of interference re-reflections in MIMO radar at multiplicative processing
717
Analysis of interference sensing for DAA UWB-IR systems
718
Analysis of interference signal from LTE phone on sound systems
719
Analysis of interference-aware receivers in heterogeneous LTE networks
720
Analysis of interfering signals in structures of integrated circuits
721
Analysis of interferometric crosstalk in optical switch blocks using moment generating functions
722
Analysis of interferometric crosstalk in remote delivery of very narrow linewidth millimetre wave signals
723
Analysis of interferometric images using the Hough transform
724
Analysis of interferometric signals based on coherence and power spectral density
725
Analysis of interharmonics in conventional and matrix converter fed adjustable speed drives
726
Analysis of interharmonics in DC arc furnace installations
727
Analysis of inter-hemispheric and intra-hemispheric differences of the correlation dimension in the emotional states based on EEG signals
728
Analysis of interinjection-locked oscillators for integrated phased arrays
729
Analysis of interior permanent magnet synchronous motor designed for flux weakening operation
730
Analysis of interlaced video signals and its applications
731
Analysis of interleaved arrays of waveguide elements
732
Analysis of interleaved converters with WTA-based switching
733
Analysis of interleaved dual boost converter with integrated magnetics: signal flow graph approach
734
Analysis of intermediary yoke for 12-pulse transformer connections
735
Analysis of intermetallic compounds in lead-free solders
736
Analysis of intermittent control systems by human operations
737
Analysis of intermittent control systems by human operations
738
Analysis of Intermodulation and Noise Performance for Recursive Active Microwave Integrated Filters
739
Analysis of intermodulation distortion in GaAs m.e.s.f.e.t. amplifiers
740
Analysis of intermodulation distortion in GaAs/AlGaAs HBT´s
741
Analysis of intermodulation distortion in log-normal shadowed WLAN channels
742
Analysis of intermodulation distortion specification for radio LANs using multicarrier schemes
743
Analysis of Intermodulation in Rotated Y-Cut Quartz Thickness-Shear Resonators
744
Analysis of Intermodulation Noise in Frequency Converters by Volterra Series
745
Analysis of intermodulation nulling in HEMTs
746
Analysis of Inter-Modulation Products and Nonlinear Distortion in RF OFDM Transmitter Systems
747
Analysis of Intermodulation Relationships Within a Limited Band of Frequencies
748
Analysis of Inter-Module Error Propagation Paths in Monolithic Operating System Kernels
749
Analysis of intermolecular coordinate contributions to third-order nonlinear-optical response of liquids with a quantum harmonic-oscillator model
750
Analysis of intermolecular interactions in progesterone and 17α-hydroxyprogesterone crystals
751
Analysis of intermolecular vibrational modes in organic compounds using two-dimensional terahertz correlation spectroscopy
752
Analysis of internal and near-surface fields characteristics for plane wave from a chiral dielectric sphere
753
Analysis of internal charge evolution in paper insulation, via PEA method
754
Analysis of internal data width requirements for SISO decoding modules
755
Analysis of internal flow field in fluid coupling based on numerical simulation and experimental measurement
756
Analysis of internal flow in the Kaplan turbine with the Triangle Acute Clearance
757
Analysis of internal logistic systems based on event logs
758
Analysis of internal parallel move gear transmission from kinetics
759
Analysis of Internal Partial Discharge Based on PD Current Waveform
760
Analysis of internal partial discharges in solid dielectrics using an electro-optical measurement system
761
Analysis of internal PD pulses accompanying with electrical tree in LDPE
762
Analysis of Internal Quantum Efficiency and Current Injection Efficiency in III-Nitride Light-Emitting Diodes
763
Analysis of internal quantum efficiency of high-brightness AlGaInP LEDs
764
Analysis of internal ROADM protection
765
Analysis of internal timings and clock rates of TerraSAR-X
766
Analysis of internal unbalancing current in distribution transformers
767
Analysis of Internal Wave Signatures in Marine Radar Data
768
Analysis of internal winding stresses in EHV generator step-up transformer failures
769
Analysis of Internally Bandlimited Multistage Cubic-Term Generators for RF Receivers
770
Analysis of Internal-Tin \\hbox {Nb}_{3}\\hbox {Sn} Conductors for ITER Central Solenoid
771
Analysis of international approaches to integrate electric vehicles into energy market
772
Analysis of international comparisons with the minimum variance method
773
Analysis of Internet Access in Thailand: Drivers and Barriers
774
Analysis of internet data center virtualization deployment technology
775
Analysis of Internet flow graph with high-degree nodes based on complex network theory
776
Analysis of Internet multicast traffic performance considering multicast routing protocol
777
Analysis of Internet Policies and Civil Rights In Italy, Serbia and Burma-Myanmar: A Technological and Legal Approach
778
Analysis of Internet robustness in attacks
779
Analysis of Internet service user audiences for network security problems
780
Analysis of Internet services in IP over ATM networks
781
Analysis of Internet services in IP over ATM networks
782
Analysis of Internet Specific Area Topology Properties
783
Analysis of Internet Topologies
784
Analysis of Internet topologies: A historical view
785
Analysis of Internet topology data
786
Analysis of Internet Voting Protocols with Jonker-Vink Receipt-Freeness Formal Model
787
Analysis of Internet word of mouth regarding Taiwan´s resort hotels
788
Analysis of Internet´s negative effects on college common computer experimental teaching
789
Analysis of interoperability value proposition in the architectural, engineering and construction sector
790
Analysis of interphase currents in 12 pulse rectifiers using switching functions
791
Analysis of Interphase Currents in 12 Pulse Rectifiers Using Switching Functions
792
Analysis of interpolated channel estimation for mobile OFDM systems
793
Analysis of Interpolated FIR Filter for VoIP in Noisy Enviroment
794
Analysis of interpolation waveforms in time-averaging interpolative digital-to-analogue converters
795
Analysis of interrater agreement in ISO/IEC 15504-based software process assessment
796
Analysis of Inter-Regional Mobile Services Growth in India
797
Analysis of interrelated factors affecting efficiency and stability of power supply in developing countries
798
Analysis of interrelationships between photovoltaic power and battery storage for electric utility load management
799
Analysis of interrelationships between Suppliers configuration and performance within the supply network: A simulation approach
800
Analysis of Interrupt Coalescing Schemes for Receive-Livelock Problem in Gigabit Ethernet Network Hosts
801
Analysis of interrupt handling schemes in real-time systems
802
Analysis of interrupting characteristics for O-CO operation of self-blast type circuit breakers
803
Analysis of interscale and intrascale dependencies between image wavelet coefficients
804
Analysis of inter-sensor interference for wireless SAW sensors
805
Analysis of inter-slice correlations in ray space and its applications to data compression
806
Analysis of inter-spike interval characteristics of piecewise constant chaotic spiking oscillators
807
Analysis of interstices of a continuous thread by image processing techniques
808
Analysis of interstitial concentrations of ATP from rat soleus muscle using microdialysis combined with ion-pairing high performance liquid chromatography (HPLC)
809
Analysis of intersymbol interference in a 60 GHz-band compact-range wireless access system using various large array antennas
810
Analysis of inter-tap correlation for measured mobile radio channels at 1.9 GHz
811
Analysis of intertone and interblock interference in OFDM when the length of the cyclic prefix is shorter than the length of the impulse response of the channel
812
Analysis of inter-turn fault symptoms for the converter-fed induction motor based on the phase-shift calculation
813
Analysis of Inter-Turn Insulation of High Voltage Electrical Machine by Using Multi-Conductor Transmission Line Model
814
Analysis of inter-turn short circuit in slots by finite element model
815
Analysis of interval system using model order reduction
816
Analysis of intervehicle communication
817
Analysis of Intervehicle Communication to Reduce Road Crashes
818
Analysis of intima media thickness in ultrasound carotid artery images using level set segmentation without re-initialization
819
Analysis of intonation patterns in Cantonese aphasia speech
820
Analysis of intra-area and interarea oscillations in South-Eastern UCTE interconnection
821
Analysis of intracardiac electrogram changes
822
Analysis of Intracerebral EEG Recordings of Epileptic Spikes: Insights From a Neural Network Model
823
Analysis of intrachannel nonlinear effects in highly dispersed optical pulse transmission
824
Analysis of intra-chip degital noise coupling path in fully LTE compliant RF receiver test chip
825
Analysis of intracranial pressure recordings: Comparison of PCA and signal averaging based filtering methods and signal period estimation
826
Analysis of intracranial pressure signals recorded during infusion studies using the spectral entropy
827
Analysis of intra-flow interference in Opportunistic Large Array transmission for strip networks
828
Analysis of intra-level isolation test structure data by multiple regression facilitate rule identification for diagnostic expert systems
829
Analysis of intrapulse fluctuations of the phase difference from the experimental data
830
Analysis of intra-step-barrier quantum wells for high-power electroabsorption modulators
831
Analysis of Intrinsic Charge Loss Mechanisms for Nanoscale nand Flash Memory
832
Analysis of Intrinsic Mode Functions: A PDE Approach
833
Analysis of intrinsic optical bistability in Tm/sup 3+/ doped crystals
834
Analysis of intrinsic relationship among elements of regional knowledge competence: Empirical analysis based on panel datum of 31 Chinese provinces from 2004 to 2006
835
Analysis of intrinsic small signal parameters in HEMTs
836
Analysis of Intrinsic Variation of Data Retention in Phase-Change Memory Using Phase-Field Method
837
Analysis of Introducing Active Learning Methodologies in a Basic Computer Architecture Course
838
Analysis of Intrusion Management System Technology
839
Analysis of intrusion-tolerant architectures for Web Servers
840
Analysis of intumescent system: Model and experimentation
841
Analysis of Invariant Meta-features for Learning and Understanding Disable People´s Emotional Behavior Related to Their Health Conditions: A Case Study
842
Analysis of invariant moments in tasks image processing
843
Analysis of invariant set for actuator saturation uncertain systems with disturbance
844
Analysis of In-vehicle Power Line Channel Response
845
Analysis of inventory management in small business auto parts
846
Analysis of inventory systems with (r,Q)-policies and backordering
847
Analysis of inverse class frequency in centroid-based text classification
848
Analysis of Inverse Class-E Power Amplifier at Subnominal Condition With 50% Duty Ratio
849
Analysis of Inverse Crosstalk Channel Estimation Using SNR Feedback
850
Analysis of inverse kepstrum and innovations-based application to noise cancellation
851
Analysis of inverse kinematics and dynamics of a novel 6-degree-of-freedom wire-driven parallel gantry crane robot
852
Analysis of Inverse Narrow-Channel Effect Based on a Three-Dimensional Simulation
853
Analysis of inverse scattering in a waveguide using the method of volume singular integral equation
854
Analysis of inverter nonlinearity effects on sensorless control for permanent magnet machine drives based on High-Frequency Signal Injection
855
Analysis of inverter-fed high speed induction motor considering crosspath resistance between adjacent rotor bars
856
Analysis of inverter-fed high speed induction motor considering skew factor and crosspath resistance between adjacent rotor bars for wide speed range
857
Analysis of inverter-fed high-speed induction motor considering crosspath resistance between adjacent rotor bars
858
Analysis of Inverter-Fed Squirrel-Cage Induction Motor During Eccentric Rotor Motion Using FEM
859
Analysis of inverters and dc/dc converters
860
Analysis of Inverter-Voltage Influence on Distributed MPPT Architecture Performance
861
Analysis of Investment Decision System for Oil Companies Based on System Dynamic Principles
862
Analysis of investments in generation capacity: a bilevel approach
863
Analysis of In-vitro Neurite Extension for Neurotrophic Electrode Design
864
Analysis of involuntary movement and development of a writing assistance system for adults with tension athetosis type cerebral palsy
865
Analysis of Involuntary Movements for Adapting Input Devices to People with Motor Impairments Based on 3-Axis Accelerometers
866
Analysis of in-well pumping of semiconductor lasers by microscopic gain calculations
867
Analysis of ion and X-ray time series measurements of electron beam welding for development of online monitoring
868
Analysis of ion back-flow in an electron gun of a C-band space TWT
869
Analysis of Ion Beam Generated from Sheath Field of Grid Electrode and Its Application
870
Analysis of ion flow field of UHV/EHV AC transmission lines
871
Analysis of ion focusing parameters PBFA-II
872
Analysis of ion source arc chamber failure and grid damage sustained during high power operation
873
Analysis of ionic transport in antistatic polymers using nonlinear conductivity measurements
874
Analysis of ionized field under /spl plusmn/800 kV HVDC transmission lines
875
Analysis of ionized field under HVDC transmission lines with buildings nearby
876
Analysis of ionizing radiation induced damage in charge coupled devices
877
Analysis of ionospheric electron density distribution from GPS/MET occultations
878
Analysis of ionospheric models during ionospheric disturbances
879
Analysis of ionospheric response to solar flares at Kunming site
880
Analysis of ionospheric scintillation for global navigation satellite system at UTeM, Malaysia
881
Analysis of ionospheric scintillations of GPS and VHF/UHF signals over low latitude Indian region
882
Analysis of IP grooming approaches in optical WDM mesh networks
883
Analysis of IP Network Path Capacity Estimation Using a Variable Packet Size Method
884
Analysis of IP system channel efficiency usage reduction via TCP connection procedures
885
Analysis of IP Traceback Systems
886
Analysis of IP voice conferencing over EuroSkyWay satellite system
887
Analysis of IP voice conferencing over geostationary satellite systems
888
Analysis of IP3 of photodiode using equivalent circuit
889
Analysis of IPAR Field Performance
890
Analysis of ip-based communication backbone over shared wide area-network for Smart Grid applications
891
Analysis of IP-based Real-time Multimedia Group Communication in Heterogenous Wireless Networks
892
Analysis of IPDL patterns for increased signal detection probability in UMTS
893
Analysis of IPM current oscillation under short circuit condition
894
Analysis of IPSec overheads for VPN servers
895
Analysis of IPSec VPNs performance in a multimedia environment
896
Analysis of IPTV user behaviors with MapReduce
897
Analysis of IPv6 encapsulation over ULE and MPE using a regenerative satellite payload
898
Analysis of IPv6 Network Communication Using Simulation
899
Analysis of IQ imbalance on initial frequency offset estimation in direct down-conversion receivers
900
Analysis of IR-based virtual reality tracking using multiple Kinects
901
Analysis of IR-drop in 3-D IC packaging using a non-conformal domain decomposition method
902
Analysis of IR-drop scaling with implications for deep submicron P/G network designs
903
Analysis of iron and magnet losses in surface permanent magnet machines resulting from injection-based self-sensing position estimation
904
Analysis of Iron and Magnet Losses in Surface-Permanent-Magnet Machines Resulting From Injection-Based Self-Sensing Position Estimation
905
Analysis of iron loss in a wheel motor using high quality silicon steel plates
906
Analysis Of Iron Loss In Hard Disk Drive Spindle Motors
907
Analysis of iron loss in hard disk drive spindle motors
908
Analysis of iron loss in interior permanent magnet synchronous motor over a wide-speed range of constant output power operation
909
Analysis of Iron Loss in Interior PM Machines With Distributed Windings Under Deep Field Weakening
910
Analysis of iron loss in interior PM machines with distributed windings under deep field-weakening
911
Analysis of iron loss in interlocked lamination core
912
Analysis of iron losses in induction motor with an improved iron-loss model
913
Analysis of Irrational Transfer Functions for Distributed-Parameter Systems
914
Analysis of irregular current and voltage wave shapes found in industrial power engineering
915
Analysis of Irregular Multiconductor Transmission Line Structures with External Electromagnetic Field
916
Analysis of irregularities in a planar dielectric waveguide
917
Analysis of Irregularities in Human Actions with Volumetric Motion History Images
918
Analysis of irregularity factor of stranded conductors
919
Analysis of irregularly shaped texture regions: a comparative study
920
Analysis of irreversible magnet demagnetization in line-start motors based on the finite-element method
921
Analysis of IRS 1B LISS-II image using fuzzy and symbolic approach
922
Analysis of IRS imagery for detecting man-made objects with a multivalued recognition system
923
Analysis of ISAR images of a helicopter by a facet model
924
Analysis of ISAR imaging using combined MUSIC and ICA algorithms
925
Analysis of iSCSI short blocks access
926
Analysis of ISDB-Tb signal propagation in indoor environments
927
Analysis of ISDN limitations based on the user expectations
928
Analysis of ISI for an IR UWB symbol-differential autocorrelation receiver
929
Analysis of island power investment decision models under different market stages
930
Analysis of island wakes and katabatic winds imaged by RADARSAT-1 synthetic aperture radar
931
Analysis of Islanding Detection in Distributed Generation Using Fuzzy Logic Technique
932
Analysis of islanding detection methods for grid-connected distributed generation in provincial electricity authority distribution systems
933
Analysis of Islanding Possibilities in Romanian Transmission Power System
934
Analysis of island-operated distribution networks with distributed induction generation under fault conditions
935
Analysis of ISO 6983 NC Data Based on ISO 14649 CNC Data Model
936
Analysis of isolated self-excited induction generator feeding a rectifier load
937
Analysis of isolated three-level half-bridge bidirectional DC/DC converter based on series resonant
938
Analysis of Isolation of Two-Port Antenna Systems using Simultaneousmatching
939
Analysis of isotropic and anisotropic etch field emitter array cathodes
940
Analysis of isotropic deviation of the electric-fields probe in the personal exposure measurement meter
941
Analysis of isotropic materials with vector hysteresis
942
Analysis Of Isotropic Materials With Vector Relation Hysteresis
943
Analysis of ISP caching in information-centric networks
944
Analysis of ISSQ/IDDQ testing implementation and circuit partitioning in CMOS cell-based design
945
Analysis of issues for implementing e-learning: The student perspective
946
Analysis of issues with load balancing algorithms in hosted (cloud) environments
947
Analysis of IT Outsourcing Services Failures Based on an Existing Risk Model
948
Analysis of IT/Business Alignment Situations as a Precondition for the Design and Engineering of Situated IT/Business Alignment Solutions
949
Analysis of Iterated Hard Decision Decoding of Product Codes with Reed-Solomon Component Codes
950
Analysis of iterative decoding for serial concatenated convolutional codes
951
Analysis of iterative decoding of turbo codes
952
Analysis of iterative demapping and decoding for MBOK DS-UWB systems via EXIT chart
953
Analysis of iterative matrix code application in a channel with grouped errors
954
Analysis of iterative multi-user detection schemes with EXIT charts
955
Analysis of Iterative NOR Autonomous Sequential Machines
956
Analysis of iterative phase retrieval approach to optimize amplitude measurement parameters
957
Analysis of iterative receivers for clipped COFDM signaling based on soft turbo-DAR
958
Analysis of I-V measurements on Pt/Au-GaN Schottky contacts in a wide temperature range
959
Analysis of jackknifing in articulated steer vehicles
960
Analysis of jamming effectiveness on miss distance
961
Analysis of Jamming Effects on IEEE 802.11 Wireless Networks
962
Analysis of jamming on DS-UWB system
963
Analysis of Japanese folktales for the purpose of story generation
964
Analysis of Japanese Information Systems Co-authorship Data
965
Analysis of Japanese MOT education requirements by a Needs-Seeds matrix
966
Analysis of Japanese national consumer price index using fuzzy autocorrelation model with fuzzy confidence intervals
967
Analysis of Java programs using Joana and Java SDG API
968
Analysis of JDAM tests at China Lake
969
Analysis of JERS-1 SAR imagery
970
Analysis of jet engine modulation effect with extended Hilbert-Huang transform
971
Analysis of JET Polarimeter With a Propagation Code Based on the Stokes Formalism
972
Analysis of Jiangsu tourism development potential: A comprehensive perspective of traffic accessibility and tourism resources
973
Analysis of Jing-Jin-Tang district seven-year aerosol change using MODIS data
974
Analysis of jitter accumulation in interleaved phase frequency detectors for high-accuracy on-chip jitter measurements
975
Analysis of jitter control algorithms in QoS networks
976
Analysis of jitter due to power-supply noise in phase-locked loops
977
Analysis of jitter generated in SRTS method
978
Analysis of jitter in clock distribution networks
979
Analysis of jitter in phase-locked loops
980
Analysis of jitter in ring oscillators due to deterministic noise
981
Analysis of jitter in supporting multimedia service requirements over ATM
982
Analysis of jitter peaking and jitter accumulation in re-circulating delay-locked loops
983
Analysis of Jitter Peaking Effects in Digital Long-Haul Transmission Systems Using SAW-Filter Retiming
984
Analysis of Jitter-Induced Voltage Noise in Clock Channels
985
Analysis of job execution reliability in a grid through job accounting tool
986
Analysis of job search behaviors in Korea
987
Analysis of Jobs in a Multi-Organizational Grid Test-bed
988
Analysis of Joins and Semi-joins in Centralized and Distributed Database Queries
989
Analysis of join-structure influencing on guidance system for high-speed maglev train
990
Analysis Of Joint & Termination Failures On Extruded Dielectric Cables
991
Analysis of Joint and Partial Component Carrier Assignment Techniques in LTE and LTE-A
992
Analysis of Joint and Termination Failures on Extruded Dielectric Cables A Report of the Accessories Subcommittee of the Insulated Conductors Committee
993
Analysis of joint angle-frequency estimation using ESPRIT
994
Analysis of Joint Call Admission Control Strategies for Heterogeneous Cellular Networks
995
Analysis of joint capabilities integration and development system of U.S. ARMY
996
Analysis of Joint Channel Estimation and Equalization using a Kalman Filter
997
Analysis of joint channel estimation and joint data detection in TD-SCDMA systems
998
Analysis of Joint Connectivity Condition for Multiagents With Boundary Constraints
999
Analysis of Joint Correlation between Arm and Lower Body in Dart Throwing Motion
1000
Analysis of joint Doppler, phase noise effects on OFDM systems in time varying channels