بر اساس عنوان

1
Characterization and modeling of thermal effects in sub-micron InP DHBTs
2
Characterization and Modeling of Thick-Film Components for Hybrid Microwave-Integrated Circuits
3
Characterization and Modeling of Thin Film Interface Strength Considering Mode Mixity
4
Characterization and modeling of three CMOS diode structures in the CDM to HBM timeframe
5
Characterization and modeling of three-terminal heterojunction phototransistors using an InGaP layer for passivation
6
Characterization and modeling of transient device behavior under CDM ESD stress
7
Characterization and modeling of transient latchup in CHMOS technology
8
Characterization and Modeling of Transistor Variability in Advanced CMOS Technologies
9
Characterization and modeling of transistors embedded in a high performance bipolar logic array
10
Characterization and modeling of tunnel barrier reliability
11
Characterization and Modeling of UHF RFID Channels for Ranging and Localization
12
Characterization and Modeling of Underwater Acoustic Communications Channels for Frequency-Shift-Keying Signals
13
Characterization and modeling of waffle MOSFETs for high frequency applications
14
Characterization and Modeling of Wideband Wireless Transceivers
15
Characterization and Modeling of Wire Bond Interconnects up to 100 GHz
16
Characterization and modeling of wireless channels for networked robotic and control systems - a comprehensive overview
17
Characterization and modeling of zero bias rf-detection diodes based on triple barrier resonant tunneling structures
18
Characterization and modeling scheme for harmonics at power amplifier output
19
Characterization and modelling issues in MOS structures with ultra thin oxides
20
Characterization and Modelling of Cure Kinetics of A Molding Compound
21
Characterization and modelling of differential sensitivity of nanoribbon-based pH-sensors
22
Characterization and modelling of electrically small systems to predict EMC performance in different environments
23
Characterization and modelling of EMI susceptibility in integrated circuits at high frequency
24
Characterization and modelling of gate current injection in embedded non-volatile flash memory
25
Characterization and Modelling of HEMTs as Microwave and Millimetre Wave MMIC Switches
26
Characterization and modelling of low-frequency noise in PCM devices
27
Characterization and modelling of microwave and millimeter-wave large-signal device-circuit interaction based on electro-thermal physical models
28
Characterization and modelling of nano-crystals for single electron memory point devices
29
Characterization and modelling of parasitic emission of a 32-bit automotive microcontroller mounted on 2 types of BGA
30
Characterization and modelling of power RF LDMOS transistor including self-heating effects
31
Characterization and modelling of Si MOSFETs at liquid helium temperature
32
Characterization and modelling of Si-substrate noise induced by RF signal propagating in TSV of 3D-IC stack
33
Characterization and modelling of SnO2 nanowire sensors for CO detection
34
Characterization and modelling of spectrum for dynamic spectrum access with spatial statistics and random fields
35
Characterization and Modelling of the Mechanical Properties of Pressboard
36
Characterization and modelling of THz Schottky diodes
37
Characterization and modelling of turbulence-induced scintillation on millimetre-wave line-of-sight links
38
Characterization and modelling of Ultra Wideband radio links for optimum performance of body area network in health care applications
39
Characterization and moment stability analysis of quasilinear quantum stochastic systems with quadratic coupling to external fields
40
Characterization and monitoring of laser linewidths in coherent optical OFDM systems
41
Characterization and Monitoring of Laser Linewidths in Coherent Systems
42
Characterization and monitoring of transverse beam tails
43
Characterization and Monte Carlo Analysis of Secondary Electrons Induced Program Disturb in a Buried Diffusion Bit-line SONOS Flash Memory
44
Characterization and nanostructured enhancement of boiling incipience in capillary-fed, ultra-thin sintered powder wicks
45
Characterization and noise analysis of a 12-bit current steering digital-to-analog converter
46
Characterization and Noise Analysis of Capacitive MEMS Acoustic Emission Transducers
47
Characterization and Numerical Evaluation of a Color Image Segmentation Method
48
Characterization and numerical modeling of Cu(In,Ga)(S,Se)2 solar cells
49
Characterization and Numerical Simulations of High Power Field-Plated pHEMTs
50
Characterization and operation of different cMUT membranes in air
51
Characterization and optical properties of TiO2 prepared by pulsed laser deposition
52
Characterization and optimisation of PECVD Silicon Nitride as dielectric layer for RF MEMS using reflectance measurements
53
Characterization and optimization of a bipolar ESD-device by measurements and simulations
54
Characterization and optimization of a compact, 1-MV, 6-kA radiography source
55
Characterization and optimization of a femtosecond laser by Self-Referenced Spectral Interferometry
56
Characterization and optimization of a flash X-ray source for dense spray radiography
57
Characterization and Optimization of a Laser Fusing Technology for VLSI Memories
58
Characterization and optimization of a novel design to increase the haemocompatibility of biomaterials
59
Characterization and optimization of a novel electromagnetic transduction technique for rotational energy harvesting
60
Characterization and optimization of a thermal flow sensor on circuit board level
61
Characterization and optimization of a TSV CMP reveal process using a novel wafer inspection technique for detecting sub-monolayer surface contamination
62
Characterization and optimization of a TSV CMP reveal process using a novel wafer inspection technique for detecting sub-monolayer surface contamination
63
Characterization and optimization of amorphous silicon solar cells by variation of device geometry
64
Characterization and optimization of an optical DNA hybridization sensor for the detection of multi-drug resistant tuberculosis
65
Characterization and optimization of argon sputter etching of SiO/sub 2/ in the GEC reference cell
66
Characterization and optimization of charge trapping in high-k dielectrics
67
Characterization and optimization of defects and defect tolerance for not-practically-testable circuits
68
Characterization and optimization of electron cyclotron resonance ion source
69
Characterization and optimization of electrooptic sampling by volume-integral-method and application of space-harmonic potential
70
Characterization and Optimization of High Brightness Organic Light Emitting Diodes (OLEDs)
71
Characterization and optimization of infrared emission from light filaments observed in a fs-TW laser beam propagating in the atmosphere
72
Characterization and optimization of infrared poly SiGe bolometers
73
Characterization and Optimization of InGaAs/InP Photodiodes with High Saturation Current
74
Characterization and optimization of inorganic spin on glass process for inter-metal dielectric using field emission scanning electron microscopy
75
Characterization and optimization of LTCC for high density large area MCM´s
76
Characterization and Optimization of Memory-Resident MapReduce on HPC Systems
77
Characterization and optimization of metal etch processes to minimize charging damage to submicron transistor gate oxide
78
Characterization and optimization of new high-quality inorganic fibers made of LuAG:Ce and LYSO:Ce
79
Characterization and optimization of NO-nitrided gate oxide by RTP
80
Characterization and optimization of optical pulse differentiation using spectral interferometry
81
Characterization and optimization of pulse drivers for switched mode power amplifier measurements
82
Characterization and optimization of sigma-delta ADC
83
Characterization and Optimization of Single Wafer Processing Equipment with Advanced Aqueous Formulations to Achieve Lower Cost of Ownership for Advanced Cu Interconnect Cleaning Processes
84
Characterization and Optimization of Sub-32-nm FinFET Devices for ESD Applications
85
Characterization and optimization of the Al/SiOx/p-Si MIS contact in MIS-IL silicon solar cells
86
Characterization and optimization of the constrained capacity of coherent fading channels driven by arbitrary inputs: A Mellin transform based asymptotic approach
87
Characterization and optimization of the gain in Nd-doped single-mode fibers
88
Characterization and optimization of the kapitza facility at pml-pulse physics.
89
Characterization and optimization of the production probing process
90
Characterization and optimization of ZnO films for SAW devices
91
Characterization and Optimization Technique for Microwave-Driven High-Intensity Discharge Lamps Using Hot {S} -Parameters
92
Characterization and optimizations of silicide thickness in 45nm pMOS device
93
Characterization and Overview of the Helcat (Helicon-Cathode) Dual Source Linear Plasma Device
94
Characterization and parameterization of a class of multivariable non-summable stochastic processes with bounded stochastic trends
95
Characterization and parameterization of a pipeline reconfigurable FPGA
96
Characterization and parameterized generation of synthetic combinational benchmark circuits
97
Characterization and parameterized random generation of digital circuits
98
Characterization and parasitic extraction of EMI filters using scattering parameters
99
Characterization and passivation effects of an optical accelerometer based on antiresonant waveguides
100
Characterization and passivation of band gap states in metal-oxide-semiconductor field effect transistors with polycrystalline silicon channel
101
Characterization and performance analysis of a TOAD switch employing a dual control pulse scheme in high-speed OTDM demultiplexer
102
Characterization and performance analysis of a VDFLL GNSS receiver architecture
103
Characterization and Performance Analysis of LPCVD Germanium-on-Silicon C-Band Photodiodes
104
Characterization and performance comparison of digital V2-type constant on-time control for buck converters
105
Characterization and performance comparison of reverse blocking SiC and Si based switch
106
Characterization and performance comparison of ripple-based control for voltage regulator modules
107
Characterization and performance comparison of ripple-based control methods for voltage regulator modules
108
Characterization and performance evaluation for proportional delay differentiated services
109
Characterization and Performance Evaluation of a Typical Troposcatter Channel
110
Characterization and performance evaluation of CMOS based photodetectors
111
Characterization and performance evaluation of CMOS photodetectors implemented in optoelectronic circuits
112
Characterization and performance evaluation of coupled multiwaveguide arrays
113
Characterization and performance evaluation of differential shielded cables for multi-Gb/s data-rates
114
Characterization and performance investigation of nanoscale MOSFETs
115
Characterization and performance of a DAQ system for the readout of silicon pixel detectors
116
Characterization and performance of a high-current-density ion implanter with a magnetized hollow-cathode plasma source
117
Characterization and performance of electrically conductive adhesives for microwave applications
118
Characterization and performance of the planck-LFI flight model passive components
119
Characterization and performance prediction for integral capacitors in low temperature co-fired ceramic technology
120
Characterization and performance prediction for integral resistors in low temperature co-fired ceramic technology
121
Characterization and performance study of packaged micropump for drug delivery
122
Characterization and photocatalytic activity of Pd-doped ZnO nanoparticles synthesized by flame spray pyrolysis
123
Characterization and photocatalytic activity of titanate nanotube using a solvothermal route
124
Characterization and photocatalytical analysis of N, Cd-codoped TiO2 synthesized by modified sol-gel method
125
Characterization and photocurrent study of Al, Mg-doped ZnO transparent thin films prepared by sol-gel route
126
Characterization and Physical Modeling of Endurance in Embedded Non-Volatile Memory Technology
127
Characterization and physical modeling of power bipolar transistors in soft switching converters
128
Characterization and Physical Modeling of Turn-On Voltage, Saturation Voltage and Transition Slope in Graphene Barristors
129
Characterization and Physical Origin of Fast Vth Transient in NBTI of pMOSFETs with SiON Dielectric
130
Characterization and post simulation of thin-film PZT actuated plates for haptic applications
131
Characterization and prediction of excess attenuation of microwave radio signals by vegetation forms
132
Characterization and Prediction of Issue-Related Risks in Software Projects
133
Characterization and Prediction of Magnetic Losses in Soft Magnetic Composites Under Distorted Induction Waveform
134
Characterization and prediction of the avalanche performance of 1.2 kV SiC MOSFETs
135
Characterization and prediction of transverse plate resonators built using mixed strip and groove gratings
136
Characterization And Preparation Of Piezoelectric Component With Working Conditions By Using RF-Magnetron Sputtering Process
137
Characterization and processing of inter-crystal scatter in a dual layer, high resolution LSO-APD-PET
138
Characterization and processing of low dielectric constant thick film substrates for electronic packaging applications
139
Characterization and processing of low dielectric constant thick film substrates for MCM-C modules
140
Characterization and processing of thick film materials for MCM-C applications
141
Characterization and profile optimization of SiGe pFETs on silicon-on-sapphire
142
Characterization and properties of a textured silicon surface with nano-porous layer
143
Characterization and properties of devices
144
Characterization and properties of lanthanum-substituted bismuth titanate ferroelectric thin films for FeRAM application
145
Characterization and property correlation of no-flow underfill for handheld WLP
146
Characterization and property of Ti-Ta-O films fabricated by plasma immersion ion implantation and deposition
147
Characterization and Psychophysical Studies of an Air-Jet Lump Display
148
Characterization and qualification of a neutron irradiation environment for neutron hardness assurance testing of electronic devices
149
Characterization and Qualification of Cyanate Ester/Epoxy Insulation for NSTX-U Fusion Magnets
150
Characterization and qualification of radiation hardened nonvolatile phase change memory technology
151
Characterization and quantification of curvature using independent coordinates method in the human left ventricle by magnetic resonance imaging to identify the morphology subtype of hypertrophy cardiomyopathy
152
Characterization and quantification of data voids in the shuttle Radar topography mission data
153
Characterization and quantification of hydrocarbon seeps by means of subsea imaging
154
Characterization and quantitative analysis of ultra-thin GaAs single-junction solar cells with reflective back scattering
155
Characterization And Radiation Testing Of The Harris HS9008RH FADC
156
Characterization and readout of MADPET-II detector modules: validation of a unique design concept for high resolution small animal PET
157
Characterization and real time fault detection of vacuum leaks in plasma nitridation tools
158
Characterization and receiver design for underwater acoustic channels with large Doppler spread
159
Characterization and recent modification of a compact 10 GHz ECRIS for atomic physics experiments and spectroscopic investigations
160
Characterization and recognition of 3D organ shape in medical image analysis using skeletonization
161
Characterization and Recognition of Bistatic Polarimetric Mechanisms
162
Characterization and recognition of radar targets using multiscale edges
163
Characterization and recognition of underwater transient signals
164
Characterization and Recovery of Deep Sub Micron (DSM) Technologies Behavior Under Radiation
165
Characterization and Reduction of Audible Magnetic Noise Due to PWM Supply in Induction Machines
166
Characterization and reduction of edge leakage current in AlGaAs/GaAs heterojunction bipolar transistors
167
Characterization and reduction of edge leakage current in AlGaAs/GaAs heterojunction bipolar transistors for high frequency applications
168
Characterization and Reduction of Local Oscillator Phase Noise Effects in DSB Radios
169
Characterization and Reduction of Magnetic Noise Due to Saturation in Induction Machines
170
Characterization and Reduction of MEMS Sidewall Friction Using Novel Microtribometer and Localized Lubrication Method
171
Characterization and reduction of motion artifacts in photoplethysmographic signals from a wrist-worn device
172
Characterization and Reduction of Mutual Coupling Between Stacked Patches
173
Characterization and reduction of number dependent sensitivity in multi-pole linear ion trap standards
174
Characterization and reduction of simultaneous switching noise for a multilayer package
175
Characterization and reliability assessment of solder microbumps and assembly for 3D IC integration
176
Characterization and reliability of 3D LSI and SiP
177
Characterization and reliability of conductive ink/polymer filled microvias
178
Characterization and reliability of dual high-k gate dielectric stack (poly-Si-HfO2-SiO2) prepared by in situ RTCVD process for system-on-chip applications
179
Characterization and reliability of electrolytic capacitors exposed to halogenated solvents
180
Characterization and reliability of electronic devices
181
Characterization and reliability of III-V gate-all-around MOSFETs
182
Characterization and reliability of nMOSFETs after substrate transfer
183
Characterization and reliability of SiC- and GaN-based power transistors for renewable energy applications
184
Characterization and Reliability of Sintered Nanosilver Joints by a Rapid Current-Assisted Method for Power Electronics Packaging
185
Characterization and reliability of TaN thin film resistors
186
Characterization and Reliability Verification of Wafer-Level Hermetic Package with Nano-Liter Cavity for RF-MEMS Applications
187
Characterization and resistive switching properties of solution-processed HfO2, HfSiO4, and ZrSiO4 thin films on rigid and flexible substrates
188
Characterization and Resolution of Incompleteness in (World-Wide-Web) Information Extraction
189
Characterization and robustness of HVDC insulation
190
Characterization and Sampled-Data Design of Dual-Tree Filter Banks for Hilbert Transform Pairs of Wavelet Bases
191
Characterization and Scalable Modeling of Power Semiconductors for Optimized Design of Traction Inverters with Si- and SiC-Devices
192
Characterization and scalable modeling of power semiconductors for optimzied design of traction inverters with Si- and SiC-devices
193
Characterization and scanning probe spectroscopy of radiation-pressure induced mechanical oscillation of a microcavity
194
Characterization and Scintillation Studies of a Solid-State Photomultiplier
195
Characterization and Screening of SiO2 Defects in EEPROM Structures
196
Characterization and Simple Fixed Pattern Noise Correction in Wide Dynamic Range “Logarithmic” Imagers
197
Characterization and simulation for 2.5-D interposer
198
Characterization and simulation methodology for time-dependent variability in advanced technologies
199
Characterization and Simulation of a 915MHz Wireless Receiver
200
Characterization and simulation of a multi-sampling digital tanlock loop
201
Characterization and Simulation of a New Design Parallel-Plate Ionization Chamber for CT Dosimetry at Calibration Laboratories
202
Characterization and simulation of bi-quadratic coplanar waveguide tapers for time-domain applications
203
Characterization and simulation of different 7T SRAM topologies
204
Characterization and simulation of end-to-end data link performance of the NASA deep space network
205
Characterization and simulation of GaSb device-related properties
206
Characterization and simulation of hot carrier effect on erasing gate current in flash EEPROMs
207
Characterization and simulation of LTCC/adhesive and alloy 42/adhesive interface strength for automotive applications
208
Characterization and simulation of NMOS pass transistor reliability for FPGA routing circuits
209
Characterization and simulation of optimized micro paddle bridge resonator for magnetic field measurements
210
Characterization and simulation of PECVD and APCVD oxide step coverage
211
Characterization and simulation of photodetector sensing elements based-on heterojunction and heterodimensional devices
212
Characterization and simulation of polysilicon TFT-CMOS circuits for HDTV display applications
213
Characterization and simulation of proton exchanged integrated optical modulators with various dielectric buffer layers
214
Characterization and simulation of real-world cable discharge events
215
Characterization and simulation of SiGe HBT degradation induced by electromagnetic field stress
216
Characterization and simulation of signal propagation and crosstalk on advanced Cu-SiO/sub 2/ on-chip interconnects for high speed circuits
217
Characterization And Simulation Of Silicon Power Devices Up To Very High Temperatures
218
Characterization and Simulation of SOI-CMOS Devices for 3D-integration
219
Characterization and simulation of STI isolation for 0.1 /spl mu/m partially-depleted SOI devices
220
Characterization and simulation of tactile sensors
221
Characterization and simulation of the gas pressures in space for high voltage breakdown
222
Characterization and simulation of the parasitic BJT in 0.1um partially-depleted SOI devices
223
Characterization and simulation of traps in InGaP/GaAs HBT by GR noise analysis
224
Characterization and snubbing of a bidirectional MCT switch in a resonant AC link converter
225
Characterization and snubbing of a bidirectional MCT switch in a resonant AC link converter
226
Characterization and software application for a probabilistic evaluation of harmonics in electric power distribution systems
227
Characterization and Solubility of SiO2-TiO2-CaO-Na2O/SrO Bioactive Glasses
228
Characterization and solubility of Y2O3 and CeO2 containing bioactive glasses to aid spinal cord recovery
229
Characterization and Solution to a Stateful IDS Evasion
230
Characterization and source modeling of MPEG-2 VBR video source
231
Characterization and spectral equalization for hight-density disk recording
232
Characterization and spectroscopic study of positive streamers in water
233
Characterization and stability evaluation of olive oil nanoemulsion-based hydrogel formulation by nanophase emulsification technique
234
Characterization and Stability of Autonomous Positive Descriptor Systems
235
Characterization and stability of light-emitting diodes based on poly(bithiazole)´s
236
Characterization and statistical modeling of phase in single-channel synthetic aperture radar imagery
237
Characterization and suppression of drain coupling in submicrometer EPROM cells
238
Characterization and suppression of excess timing noise in the indoor atmospheric transfer of optical pulse trains
239
Characterization and Switching Performance of Electron-Beam Controlled Discharges
240
Characterization and Synthesis of Markovian Workload Models
241
Characterization and System Identification of an Unmanned Amphibious Tracked Vehicle
242
Characterization and TCAD simulation of 90 nm technology transistors under continous photoelectric laser stimulation for failure analysis improvement
243
Characterization and temperature sensor application of Ca3TaGa3Si2O14 crystals
244
Characterization and test methods for printed circuit board ESD
245
Characterization and test of a data acquisition system for PET
246
Characterization and test results for a 272K bubble memory package
247
Characterization and testing of 30 kV, 60 kW electron optical column for melting applications
248
Characterization and testing of a new bistatic profiling acoustic Doppler velocimeter: The Vectrino-II
249
Characterization and Testing of a Skin Mimicking Material for Implantable Antennas Operating at ISM Band (2.4 GHz-2.48 GHz)
250
Characterization and Testing of a Tool for Photovoltaic Panel Modeling
251
Characterization and testing of epoxy powder insulated conductors
252
Characterization and Testing of LAS: A Prototype `Large Area Sensor´ With Performance Characteristics Suitable for Medical Imaging Applications
253
Characterization and testing of microelectromechnical accelerometers
254
Characterization and testing of novel polarized nanomaterial textiles for ultrasensitive wireless gas sensors
255
Characterization and Testing of Physical Failures in MOS Logic Circuits
256
Characterization and testing of PZLT ferroelectric ceramics with two Pt implants
257
Characterization and testing of shielding gaskets at microwave frequencies
258
Characterization and testing of the BIRIS range sensor
259
Characterization and testing on integral passives for wireless applications
260
Characterization and the Immune Regulation Activities in Vitro of Se-GL-P, an Antioxidant Selenium-Containing Protein from Se-Enriched Ganoderma Lucidum Mushroom
261
Characterization and Theoretical Analysis of Rapidly Prototyped Capillary Action Autonomous Microfluidic Systems
262
Characterization and theoretical analysis of second-order intermodulation distortion of InGaAs/InP p-i-n photodiode modules for fiber-optic CATV
263
Characterization and theoretical modeling of light extraction enhancement in GaN photonic crystal light emitting diodes
264
Characterization and thermal analysis of a 48 V GaN HFET device technology for wireless infrastructure applications
265
Characterization and thermal analysis of packaged AlGaN/GaN power HEMT
266
Characterization and Throttling-Based Mitigation of Memory Interference for Heterogeneous Smartphones
267
Characterization and Tolerance of QCA Full Adder under Missing Cells Defects
268
Characterization and Tuning of A Microwave Gun Cavity
269
Characterization and tuning of predictive SSOD-PI controllers
270
Characterization and Understanding of High Valued Polysilicon Resistor Resistance Variation Across a Resistor Bank With Parallel Resistor Fingers
271
Characterization and understanding of performance losses in a highly efficient solution-processed CZTSSe thin-film solar cell
272
Characterization and Use of a 1.3–1.5 THz Multiplier Chain for Molecular Spectroscopy
273
Characterization and use of the World Bank water and sanitation database
274
Characterization and validation of a textile substrate for RF applications
275
Characterization and variability of intracortical iridium oxide microelectrodes
276
Characterization and Verification of CDMA Power Amplifiers
277
Characterization and verification of coaxial open-circuit primary standards for millimeter-wave vector network analyzer calibration
278
Characterization and verification of phase-locked loops
279
Characterization and visualization of sophisticated scanning attacks
280
Characterization and Visualization of Voltage Dips in Wind Power Installations
281
Characterization and Wideband Modeling of Miniaturized LTCC Helical Inductors
282
Characterization approaches of nanoscale modified plastics
283
Characterization approaches to place invariant sites on sitraceable scales
284
Characterization at 450, 900, 1800, and 2400 MHz of regular and chaflane street corners by measurements
285
Characterization at Cryogenic Temperatures of Piezostacks Dedicated to Fast Tuners for SRF Cavities
286
Characterization between child and adult voice using machine learning algorithm
287
Characterization by magnetophoresis of therapeutic microcarriers relying on embedded nanoparticles to allow navigation in the vascular network
288
Characterization by SEM and FTIR of B-LPCVD polysilicon films after thermal oxidation
289
Characterization conduction properties of La1.4Sr1.6Mn2O7 by complex impedance spectroscopy
290
Characterization direct bonding of SiC/SiN layer on Si wafer for MEMS capacitive pressure sensor
291
Characterization Effort of HgI2 Radiation Detectors by Pulsed Laser Transient Charge Injection Technique
292
Characterization for complex trajectory and anomaly detection
293
Characterization for dynamic micro wetting of lead-free solder paste
294
Characterization for graphene as heat spreader using thermal imaging method
295
Characterization for High-Performance CMOS Using In-Wafer Advanced Kelvin-Contact Device Structure
296
Characterization for mfs_1 gene from Riemerella anatipestifer by bioinformatics analysis
297
Characterization for novel non-traditional CMOS inverter composed of a junctionless NMOSFET and a gated N+-N−-P transistor
298
Characterization for photovoltaic generation systems via Higher Order Wavelet Neural Networks
299
Characterization for piezoelectric films using composite resonators
300
Characterization for surface morphology of Ag particles on ZnO film
301
Characterization for Ultra Wideband Pulses Transmitting through a Lossy Dielectric Slab
302
Characterization Framework and Design Patterns for the Disadvantaged User
303
Characterization in intensity and phase of a passive all-optical device based on saturable absorbers for high bit rate 2R regeneration
304
Characterization inconsistencies in CdTe and CZT gamma-ray detectors
305
Characterization issues of gate geometry in multifinger structure for RF-SOI MOSFETs
306
Characterization Measurements Methodology and Instrumental Set-Up Optimization for New SiPM Detectors - Part II: Optical Tests
307
Characterization Measurements Methodology and Instrumental Set-Up Optimization for New SiPM Detectors—Part I: Electrical Tests
308
Characterization measures of ensemble systems using a meta-learning approach
309
Characterization mechanism of antenna radiation patterns based on signal sampling
310
Characterization Method and Simple Design Formulas of MCS Lines Proposed for MMIC´s
311
Characterization Method and Simple Design Formulas of MCS Lines Proposed for MMIC´s
312
Characterization method for ionizing radiation degradation in power MOSFETs
313
Characterization Method for Mechanical Properties of Thin Freestanding Metal Films for RF-MEMS
314
Characterization Method of Electric Field Probe by Using Transfer Standard in GTEM Cell
315
Characterization method of electric field strength sensor by using transfer standard in GTEM cell
316
Characterization method of the dynamics of the trapped charge in contactless capacitive MEMS
317
Characterization method of the total dose tolerance of a logic family: application to Texas Instruments HCMOS family
318
Characterization methodology for in-home loads based on harmonics
319
Characterization methodology of a millimeter-wave 65nm CMOS PA dedicated to 60GHz WPAN standard
320
Characterization methodology to support process development of advanced patterning structures
321
Characterization methods for determination of temperature depended electrical, thermal, mechanical and fatigue properties of SnAg3.5 solder
322
Characterization methods for submicron diameter magnetic bubbles
323
Characterization Methods for the Detection of Multiple Voice Disorders: Neurological, Functional, and Laryngeal Diseases
324
Characterization methods for the sensitivity of quartz oscillators to the environment
325
Characterization Methods for Ultrathin Wafer and Die Quality: A Review
326
Characterization Methods of a Whole-Cell Bioluminescent Biosensor
327
Characterization methods of Gunn oscillators
328
Characterization methods to replicate EOS fails
329
Characterization of "Allowable perturbations" for robust stability
330
Characterization of "blinking pixels" in CMOS Image Sensors
331
Characterization of ΔΣ Converters by Means of the Sine-fit Algorithm
332
Characterization of Π-conjugated metallopolymer´s mechanical stiffness by using silicon nanotweezers
333
Characterization of “Ultrathin-Cu”/Ru(Ta)/TaN Liner Stack for Copper Interconnects
334
Characterization of α-sexithienyl thin films deposited by OMBD (organic molecular beam deposition) technique
335
Characterization of >100 GHz devices using photoconductive pump and probe measurement
336
Characterization of (t1/t1/2)/s diagnosability
337
Characterization of (AgCu)(InGa)Se _{\\bf 2} Absorber Layer Fabricated by a Selenization Process from Metal Precursor
338
Characterization of (AgCu)(InGa)Se2 absorber layer fabricated by a selenization process from metal precursor
339
Characterization of (Co-Mn-Ti) substituted M type barium hexagonal ferrite based microwave absorber at X band
340
Characterization of (FeZr,Ti-Vo ldrldr)ldr defect dipoles in (La,Fe)-codoped PZT 52.5/47.5 piezoelectric ceramics by multifrequency electron paramagnetic resonance spectroscopy
341
Characterization of (Mn, Co)-Codoped ZnO Nanorods Prepared by Thermal Diffusion
342
Characterization of /spl alpha/ and /spl gamma/ modes in radio-frequency nonthermal atmospheric plasmas
343
Characterization of \\hbox {CoCr}_{2}\\hbox {O}_{4} on Pt(111) Grown by Using Pulsed Laser Deposition
344
Characterization of {\\rm Bi}_{2}{\\rm Sr}_{2}{\\rm CaCu}_{2}{\\rm O}_{8+\\delta } Stacks Fabricated by Acid Treatment Process
345
Characterization of {\\rm TlBr}_{\\rm x}{\\rm Cl}_{1mathchar Crystals for Radiation Detectors
346
Characterization of m -Sequences of Lengths 2^{2k}-1 and
347
Characterization of \\hbox {Nb}_{3}\\hbox {Sn} Rutherford Cables for the LHC 11-T Dipole Magnet
348
Characterization of \\hbox {Nb}_{3}\\hbox {Sn} Strands for a 40-T Hybrid Magnetic Model Coil
349
Characterization of {\\rm Nb}_{3}{\\rm Al} Strands Subjected to an Axial-Strain for a Fusion DEMO Reactor
350
Characterization of \\hbox {MgB}_{2} Superconducting Hot Electron Bolometers
351
Characterization of Nb3Sn Superconductors for Hybrid Magnets
352
Characterization of 28Si+ implantation induced damage in SIMOX
353
Characterization of 0.5 mm thick films of orientation-patterned GaAs for nonlinear optical applications
354
Characterization of 0.6mils Ag Alloy wire in BGA package
355
Characterization of 1×5 InP/InGaAsP waveguide switch based on optical phased array
356
Characterization of 1.55-μm pulses from a self-seeded gain-switched Fabry-Perot laser diode using frequency-resolved optical gating
357
Characterization of 1.5-D ultrasound transducer arrays
358
Characterization of 1.8-MeV proton-irradiated AlGaN/GaN field-effect transistor structures by nanoscale depth-resolved luminescence spectroscopy
359
Characterization of 1.9- and 1.4-nm ultrathin gate oxynitride by oxidation of nitrogen-implanted silicon substrate
360
Characterization of 1/f noise in MOS transistors
361
Characterization of 1/f noise in scaled high-K NMOS transistors and SONOS nonvolatile semiconductor memory (NVSM) devices
362
Characterization of 1/f noise vs. number of gate stripes in MOS transistors
363
Characterization of 1/spl times/N broadcast and 2/spl times/N multicast packet switching using active-vertical-coupler-based optical crosspoint switch
364
Characterization of 100-Ω metal-foil resistor for AC measurements
365
Characterization of 100- \\Omega Metal Foil Standard Resistors
366
Characterization of 100-kHz noise in the lightning current derivative signals measured at the CN tower
367
Characterization of 1050-nm Pumped S-Band TDFA With Different Dopant Concentrations by Coherent Optical Frequency-Domain Reflectometry
368
Characterization of 1-10 000 nF capacitance standard for future CCEM key comparison
369
Characterization of 1200 V trench IGBT using local lifetime control for clamped inductive load under extensive measurements without freewheeling diode reverse recovery influence
370
Characterization of 14 MeV Neutron Detectors made with Polycrystalline CVD Diamond Films
371
Characterization of 15 kV SiC n-IGBT and its application considerations for high power converters
372
Characterization of 19.9%-efficient CIGS absorbers
373
Characterization of 2×2ch MPPC array at a wide temperature range (−20 °C to +22 °C)
374
Characterization of 23-percent efficient silicon solar cells
375
Characterization of 24 stacked InGaAs quantum dot laser fabricated by ultrahigh-rate MBE growth technique
376
Characterization of 29.5 GHz broadband indoor radio channels using a steerable receiving antenna
377
Characterization of 2D dopant profile in L/sub eff/ /spl sim/ 20 nm MOSFETs by inverse modeling with precise /spl part/C//spl part/V, /spl part/V/sub th///spl part/V-L measurement
378
Characterization of 2D dopant profiles for the design of proton implanted high-voltage super junction
379
Characterization of 2-D lossless degree one network
380
Characterization of 2D-photonic crystal nanocavities by polarization-dependent photoluminescence
381
Characterization of 2G Superconductor Magnetic Shields at 40–77 K
382
Characterization of 2-stage RF power amplifier for FMCW radar application
383
Characterization of 3.4-fs optical pulses generated in the monocycle region
384
Characterization of 3000 volt MOS controlled thyristors
385
Characterization of 36/spl deg/YX-LiTaO/sub 3/ wafers by line-focus-beam acoustic microscopy
386
Characterization of 3-D Coronary Tree Motion From MSCT Angiography
387
Characterization of 3D electromagnetic scattering from PEC man-made target above rough surface
388
Characterization of 3-D flow structures in the stenosed carotid bifurcation with plaque ulceration
389
Characterization of 3D spatial wireless channels
390
Characterization of 3D stacked high resistivity Si interposers with polymer TSV liners for 3D RF module
391
Characterization of 3-D Volumetric Probabilistic Scenes for Object Recognition
392
Characterization of 3D-DDTC detectors on p-type substrates
393
Characterization of 3-dimensional net upper extremity joint forces and moments during wheelchair propulsion
394
Characterization of 3D-stacked nodes for Body Area Networks at 2.45 GHz
395
Characterization of 3G Data-Plane Traffic and Application towards Centralized Control and Management for Software Defined Networking
396
Characterization of 4 K CMOS devices and circuits for hybrid Josephson-CMOS systems
397
Characterization of 4×4 high gain microstrip array antenna for 3.3GHz WiMAX application
398
Characterization of 4×4 planar antenna arrays for the frequencies 77 GHz and 94 GHz using an antenna scanning system
399
Characterization of 4×4ch MPPC array in scintillation spectrometry
400
Characterization of 4.5 kV–5.5 kA IGCTs within a medium voltage 3L-ANPC phase leg
401
Characterization of 4.5 kV/2.4 kA press pack IGBT including comparison with IGCT
402
Characterization of 40 Gb/s receivers using impulse response method
403
Characterization of 40-Gbit/s pulses generated using a lithium niobate modulator at 1550 nm using frequency resolved optical gating
404
Characterization of 45 nm att-PSM lithography with a hyper-NA ArF tool
405
Characterization of 4H semi-insulating silicon carbide for radiation detector applications
406
Characterization of 4H-SiC Epitaxial Layers and High-Resistivity Bulk Crystals for Radiation Detectors
407
Characterization of 4H-SiC MOSFET Interface Trap Charge Density Using a First Principles Coulomb Scattering Mobility Model and Device Simulation
408
Characterization of 4-Inch LiTaO3Single Crystals for SAW Device Application
409
Characterization of 50–5000MHz UWB printed antennas with different number of arms
410
Characterization of 50/60 Hz current transformers from 20 Hz to 10 kHz
411
Characterization of 6.5 kV IGBT modules for hard- and soft-switching operation in medium voltage applications
412
Characterization of 6.5 kV IGBTs for High-Power Medium-Frequency Soft-Switched Applications
413
Characterization of 60 GHz proximity desktop channels with electronic device chassis
414
Characterization of 60 GHz shadowing by human bodies and simple phantoms
415
Characterization of 60GHz quantum well passively mode-locked Fabry-Perot laser for RoF and WPAN applications
416
Characterization of 63Sn37Pb and 80Au2OSn solder sealed optical fiber feedthroughs subjected to repetitive thermal cycling
417
Characterization of 64kb test chip for touch application on 90nm SONOS technology
418
Characterization of 6H-SiC JFETs for use in a temperature monitor operating from 25°C to 350°C
419
Characterization of 720 and 940 MHz oscillators with chip antenna for wireless sensors from room temperature to 200 and 250 °C
420
Characterization of 8 fs pulses through wideband SPIRIT
421
Characterization of 8-μm period half megabit ion-implanted memory chip designs
422
Characterization of 802.11n wireless LAN performance via testbed measurements and statistical analysis
423
Characterization of 850 nm AlGaAs/GaAs implant vertical cavity emitting lasers utilizing silicon implantation induced disordering
424
Characterization of 90 nm SOI SRAM Single Cell Failure by Nano Probing Technique and TCAD Simulation
425
Characterization of 94 GHz and 183 GHz planar schottky diode based radiometer modules
426
Characterization of a γ-ray detection system based on a CsI(Tl) scintillator coupled to a silicon PiN diode
427
Characterization of a γ-ray detector based on square PSPMT array
428
Characterization of a 88Sr+ optical frequency standard at 445 THz by two-trap comparison
429
Characterization of a 0.1 /spl mu/m MOSFET using cross-sectional scanning tunneling microscopy
430
Characterization of a 0.16mm CMOS Technology using SEMATECH ESD Benchmarking structures
431
Characterization of a 0.18 μ m CMOS Color Processing Scheme for Skin Detection
432
Characterization of a 1- mu s, 1-MA plasma erosion opening switch
433
Characterization of a 1×32 element metal-semiconductor-metal optoelectronic mixer array for FM/cw LADAR
434
Characterization of a 10 GHz harmonically mode-locked erbium fiber ring laser using SHG FROG
435
Characterization of a 12-cm-diameter, triple-shell gas puff nozzle for argon z-pinch experuvients at 6 ma
436
Characterization of a 13.56 MHz RF-ID system based on scattering parameters approach
437
Characterization of a 14 in × 17 in flat panel detector based on ion shower doped a-Si : H P-I-N diodes
438
Characterization of a 14" × 17" flat panel detector based on ion shower doped a-Si:H PIN diodes
439
Characterization of a 16-bit threshold logic single-electron technology adder
440
Characterization of a 16-channel optical/electronic selector for fast packet-switched WDMA networks
441
Characterization of a 2 {\\hbox {Tb\\it/\\in}}^{2} Patterned Media Recording System
442
Characterization of A 2 GHz Submicron Bipolar 60 Watt Power Transistor with Single Tone, Multi-Tone, and Cdma Signals
443
Characterization of a 2 ,\\times, 2 Optical Switch Based on a Multitransducers Acousto-Optic Deflector
444
Characterization of a 2-channel digitizer with differential inputs
445
Characterization of a 2D laser scanner for mobile robot obstacle negotiation
446
Characterization of a 2-DoF MEMS nanopositioner with integrated electrothermal actuation and sensing
447
Characterization of a 30 kV, 75 C triggered vacuum switch
448
Characterization of a 300 GHz imaging radar for standoff detection
449
Characterization of a 32 × 32 InSb hybrid IR focal plane
450
Characterization of a 3D-MEMS piezoelectric transducer for portable imaging systems
451
Characterization of a 3G EV-DO network - A measurement study
452
Characterization of a 4 Mbit bubble memory device with "Wide gap" permalloy propagation tracks
453
Characterization of a 4 ×  4 Gb/s Parallel Electronic Bus to WDM Optical Link Silicon Photonic Translator
454
Characterization of a 400-GHz SiGe HBT technology for low-power D-Band transceiver applications
455
Characterization of a 40-MHz focused transducer with a fiber grating laser hydrophone
456
Characterization of a 450-km-baseline GPS carrier-phase link using an optical fiber link
457
Characterization of a 450-km-baseline GPS carrier-phase link using an optical fiber link
458
Characterization of a 5 kW solid oxide fuel cell stack using power electronic excitation
459
Characterization of a 50 J linear transformer driver
460
Characterization of a 50-Ω Exposure Setup for High-Voltage Nanosecond Pulsed Electric Field Bioexperiments
461
Characterization of a 500J Dense Plasma Focus for Producing Soft x-rays
462
Characterization of a 500J dense plasma focus for producing soft x-rays
463
Characterization of a 6 DOF acoustic-inertial navigation system for minimally-invasive surgery
464
Characterization of a 6.5 kV / 500A IGBT module in a series resonant converter
465
Characterization of a 6.5kV IGBT for medium-voltage high-power resonant DC-DC converter
466
Characterization of a 60 GHz IP-based radio-link
467
Characterization of a 60 GHz passively mode locked quantum well laser with applications for radio over fibre
468
Characterization of a 63 MeV proton beam with optically stimulated luminescent films
469
Characterization of a 64 channel PET detector using photodiodes for crystal identification
470
Characterization of a 6-km Damping Ring for the International Linear Collider
471
Characterization of a 76 GHz antenna for personnel avoidance radar for robotics vehicles
472
Characterization of a 7KJ magnetizing pulsed circuit for online quality control of permanent magnets
473
Characterization of a 90 degrees curved microstrip transmission line in the time-domain and frequency-domain with 3D-TLM-method and measurements
474
Characterization of a 90° waveguide bend using near-field scanning optical microscopy
475
Characterization of a 90° microstrip bend with arbitrary miter via the time-domain finite difference method
476
Characterization of a 94 GHz radiometric imager with mechanical beam-scanning
477
Characterization of a Bayesian Ship Detection Method in Optical Satellite Images
478
Characterization of a beam steering lens antenna for industrial radar measurements in harsh environments
479
Characterization of a Benchmark Database for Myoelectric Movement Classification
480
Characterization of a bi-directional double-side double-gate IGBT fabricated by wafer bonding
481
Characterization of a biomolecular fuel delivery device under load
482
Characterization of a bionic electrolocation sensor using finite element modeling
483
Characterization of a bismuth germanate electric field sensor
484
Characterization of a bistable semiconductor laser amplifier through the hysteresis loop
485
Characterization of a body-tied vertical MOSFET
486
Characterization of a broadband all-optical ultrasound transducer-from optical and acoustical properties to imaging
487
Characterization of a Bulk P-I-N Switch Using Iris Mounting for Added Isolation (Short Papers)
488
Characterization of a bulk-micromachined post-process module: for silicon RF technology
489
Characterization of a buried cylindrical object from its scattered field
490
Characterization of a Burn-in Failure Caused by a Defective Source Driver on TFT-LCD Panel
491
Characterization of a butterfly-type valve
492
Characterization of a capacitive imaging system for skin surface analysis
493
Characterization of a capacitorless current-mode bandpass biquad via an artificial neural network
494
Characterization of a cascade LMS predictor
495
Characterization of a cavity-backed capacitively-fed folded slot antenna using DOE techniques
496
Characterization of a CBR connection over a channel with known bounded delay variation
497
Characterization of a CdTe microstrip detector as a hard X ray focal plane prototype
498
Characterization of a chaotic telecommunication laser for different fiber cavity lengths
499
Characterization of a Chromium-Gold Deposition Process for the Production of Thin Film Hybrid Microcircuits
500
Characterization of a Circular Polarization Microstrip Antenna using a Temporal Method
501
Characterization of a Class of "Convexificable" Resource Allocation Problems
502
Characterization of a class of non-Gaussian processes
503
Characterization of a class of waveguide discontinuities using a modified TEmnx mode approach
504
Characterization of a Closed-Loop Controlled Current-Fed Reluctance Machine Taking into Account Saturation
505
Characterization of a CMOS current-steering DAC using state-space models
506
Characterization of a CMOS Geiger photodiode pixel
507
Characterization of a CMOS SPAD sensor designed for fluorescence lifetime spectroscopy
508
Characterization of a coaxial mid-gap SB CNTFET inverter
509
Characterization of a coherent optical RF channelizer based on a diffraction grating
510
Characterization of a Cold Atmospheric Pressure Plasma Jet Device Driven by Nanosecond Voltage Pulses
511
Characterization of a cold atmospheric pressure plasma jet driven by nanosecond high-voltage pulses
512
Characterization of a cold atom gyroscope
513
Characterization of a cold cesium source for PARCS: primary atomic reference clock in space
514
Characterization of a cold cesium source for PARCS: Primary Atomic Reference Clock in Space
515
Characterization of a cold cesium source for PARCS: Primary Atomic Reference Clock in Space
516
Characterization of a Commercially Available Large Area, High Detection Efficiency Single-Photon Avalanche Diode
517
Characterization of a Completely User - Independent Algorithm for the Segmentation of Carotid Artery Ultrasound Images
518
Characterization of a Completely User-Independent Algorithm for Carotid Artery Segmentation in 2-D Ultrasound Images
519
Characterization of a compressed sensing PET detector and data acquisition system: Effects of multiplexing and sampling rate
520
Characterization of a compressively sampled photonic link
521
Characterization of a Computer Board-to-Board Ultra-Wideband Channel
522
Characterization of a configurable sensor signal conditioning circuit for multi-sensor microsystems
523
Characterization of a confined environment based on acoustic and reverberation chamber theory. Comparison with the case of a car
524
Characterization of a Conflict
525
Characterization of a Connectivity Measure for Sparse Wireless Multi-hop Networks
526
Characterization of a controlled-clearance piston gauge using the Heydemann-Welch model
527
Characterization of a CPV module prototype for design and performance improvement
528
Characterization of a CPW-MS transition for antenna applications
529
Characterization of a Cryogenic RF-Preamplifier for Superconducting Photodetector Readout
530
Characterization of a cryogenically cooled Silicon Germanium HBT amplifier
531
Characterization of a crystal for x-ray spectropolarimetric plasma diagnostics
532
Characterization of a Cube Textured Cu2O Buffer Layer on Cu Tapes for YBCO Coated Conductors
533
Characterization of a current shunt and an inductive voltage divider for PMU calibration
534
Characterization of a current-mode bandgap circuit structure for high-precision reference applications
535
Characterization of a cylindrical screen for external excitations and application to shielded cables
536
Characterization of a cylindrical vibrating body in shallow water from partial measurement of its radiated field
537
Characterization of a CZT focal plane small prototype for hard X-ray telescope
538
Characterization of a D-Amino Acid Oxidase Microbiosensor for D-Serine Detection in the Central Nervous System
539
Characterization of a DC grid for Power Line Communications in smart grids
540
Characterization of a DC to 40 GHz SPDT switch based on GaAs mHEMT technology at cryogenic temperature
541
Characterization of a detector head based on continuous LaBr3 crystals and SiPM arrays for dose monitoring in hadron therapy
542
Characterization of a difference-frequency based mid-infrared comb source
543
Characterization of a digital ASIC readout system for 11?11 pixelated TlBr detectors
544
Characterization of a Digital Micromirror Device for Computer Generated Video Holography
545
Characterization of a digitizer for a low value resistor calibration system in the audio-frequency band
546
Characterization of a diode-pumped cw high-power all solid-state laser at 266 nm
547
Characterization of a Dipole Surface Drive Actuator With Large Travel and Force
548
Characterization of a distortion-corrected Nd:YAG laser with a self-conjugating loop geometry
549
Characterization of a distributed feedback laser with air/semiconductor gratings embedded by the wafer fusion technique
550
Characterization of a dual energy angiographic system with CCD+FOS and Si-strips detectors
551
Characterization of a Dual-Mode Horn for Submillimeter Wavelengths (Short Papers)
552
Characterization of a dual-plane microstrip interconnect with reduced pulse distortion and crosstalk
553
Characterization of a dual-polarization microstrip phased array antenna for weather sensing applications
554
Characterization of a Far-Field Microwave Magnetic Field Strength Sensor Based on Double Radiooptical Resonance
555
Characterization of a fast to thermal neutron spectrum converter on PROSPERO reactor
556
Characterization of a Fast, Sensitive Gamma Detector Utilizing Microchannel Plate Photomultiplier
557
Characterization of a Fault-tolerant NoC Router
558
Characterization of a femtosecond kHz amplifier chain by spectral shearing interferometry
559
Characterization of a Ferroelectric Atmospheric Pressure Plasma Source
560
Characterization of a ferroelectric liquid crystal-based time delay unit for phased array antenna applications
561
Characterization of a Ferroelectric Plasma Source Operated at Atmospheric Pressure
562
Characterization of a fertility candidate gene Ccdc79 in meiotic germ cells
563
Characterization of a Fiber Bragg Grating for Use in a THz Spectrometer
564
Characterization of a fiber-optic direct modulation analog link with chirp radar signals
565
Characterization of a fiber-optical parametric amplifier in a 5 × 28-GBd 16-QAM DWDM system
566
Characterization of a flat plate antenna for OAM generation in the millimeter frequency band
567
Characterization of a Flexible UWB Sensor for Indoor Localization
568
Characterization of a flight control computer with rollback recovery
569
Characterization of a flip-chip interconnect at frequencies up to 30 GHz
570
Characterization of a Flip-Flop Metastability Measurement Method
571
Characterization of a floating-gate radiation sensor for X-ray dose detection
572
Characterization of A Folded Stepped Impedance Resonator for Miniature Microstrip Bandpass Filter Applications
573
Characterization of a front-end for high contrast double CPA Ti:sapphire laser
574
Characterization of a full encoder/decoder in the AWG configuration for code-based photonic routers-part I: modeling and design
575
Characterization of a full encoder/decoder in the AWG configuration for code-based photonic Routers-part II: experiments and applications
576
Characterization of a full military temperature range one megabit bubble memory device
577
Characterization of a fully resonant, 1-MHz, 25-Watt, DC/DC converter fabricated in a rad-hard BiCMOS/high-voltage process
578
Characterization of a GaN Lamb-Wave Sensor for Liquid-Based Mass Sensing Applications
579
Characterization of a gate drive technique for snubberless operation of gate controlled devices
580
Characterization of a geometrical wireless signal propagation model for indoor ranging techniques
581
Characterization of a GHz non-adiabatic single-electron pump using a cryogenic current comparator
582
Characterization of a gigahertz transverse electromagnetic cell (GTEM cell)
583
Characterization of a glow discharge detector with terahertz time domain spectroscopy
584
Characterization of a Glow Discharge Detector With Terahertz Time Domain Spectroscopy
585
Characterization of a Hamamatsu R7600 multi-anode photomultiplier tube with single photon signals
586
Characterization of a handheld gamma camera for intraoperative use for sentinel lymph node biopsy
587
Characterization of a hand-wrist exoskeleton, READAPT, via kinematic analysis of redundant pointing tasks
588
Characterization of a harbor seal whisker-inspired flow sensor
589
Characterization of a harmonically mode-locked erbium-doped fiber ring laser and its application to optical communication systems
590
Characterization of a helicon ion source for Helium-3 fusion in an inertial electrostatic confinement device
591
Characterization of a hermetic silicon box fitted in a cardiac lead in order to measure the endocardial acceleration signal
592
Characterization of a High Capacity Multi-User Optical Access Network Using 1 Gb/s 16 QAM Subcarrier Multiplexing
593
Characterization of a high current induction accelerator electron beam via optical transition radiation from dielectric foils
594
Characterization of a high current ultra low energy ion implanter
595
Characterization of a high frequency Beverage antenna using a fiber-optic measurement technique
596
Characterization of a high gain BJT used in power conversion on AC mains
597
Characterization Of A High Performance Duplex Stainless Steel For Orthopedic Applications
598
Characterization of a high power and high accuracy integrating sphere radiometer for fiber applications
599
Characterization of a High Power Nanocrystalline Transformer
600
Characterization of a high power nanocrystalline transformer
601
Characterization of a High Resolution Acquisition System for Marine Geophysical Applications
602
Characterization of a High Spatial Resolution \\gamma Camera for Scanning HPGe Segmented Detectors
603
Characterization of a high temperature multichip SiC JFET-based module
604
Characterization of a high temperature superconducting oxide thin-film RF SQUID
605
Characterization of a high throughput implanter for the low temperature polysilicon AMLCD industry
606
Characterization of a high-contrast front-end prototype for the OMEGA EP laser facility
607
Characterization of a higher-order associative memory that uses product units
608
Characterization of a highly sensitive silicon based three-axial piezoresistive force sensor
609
Characterization of a high-Q in-liquid longitudinal-mode film bulk acoustic resonator for real-time in-situ monitoring of competitive protein adsorption
610
Characterization of a high-Q on-chip transmission line for CMOS MMIC applications
611
Characterization of a high-resolution analog-to-digital converter with a Josephson AC voltage source
612
Characterization of a High-Resolution Analog-to-Digital Converter with an Ac Josephson Voltage Source
613
Characterization of a high-resolution framing-camera diagnostic for sabre ion beam measurements
614
Characterization of a high-sensitivity micromachined tunneling accelerometer
615
Characterization of a high-sensitivity micromachined tunneling accelerometer with micro-g resolution
616
Characterization of a High-TC Superconducting Thin Film by the Ring Resonator Method
617
Characterization of a high-voltage press pack IGBT under soft-switching conditions
618
Characterization of a homemade external-cavity diode laser employing tapered amplifier
619
Characterization of a HPGe segmented detector position response using pulse shape comparison techniques
620
Characterization of a hybrid photonic analog-digital converter based on WDM technique
621
Characterization of a hybrid silicon-InP laser tapered mode converter
622
Characterization of a inverted-cusptron microwave source
623
Characterization of a JFET operational amplifier by planned experimentation and its impact on IC manufacturing
624
Characterization of a Ka-band Sheet-Beam Coupled-Cavity Slow-Wave Structure
625
Characterization of a Ka-band sheet-beam coupled-cavity slow-wave structure: Simulation and experiment
626
Characterization of a klystrode as a RF source for high-average-power accelerators
627
Characterization of a Langevin transducer incorporating Mn-doped piezocrystal material
628
Characterization of a Large Area Thinned Silicon Microdosimeter for Space and Particle Therapy
629
Characterization of a large scale DNW MAPS fabricated in a 3D integration process
630
Characterization of a Large Size Co-Extruded Al-Ni Stabilized Nb-Ti Superconducting Cable for Future Detector Magnets
631
Characterization of a large-area plasma generated by electron cyclotron resonance in a permanent-magnet static field
632
Characterization of a large-format, fine-pitch CdZnTe pixel detector for the HEFT balloon-Borne experiment
633
Characterization of a large-scale Delay Tolerant Network
634
Characterization of a laser-scanning microscope in the femtosecond regime
635
Characterization of a linear filter-based model to extend Optical Cochlear Implant measurements
636
Characterization of a Linear Photoconductive Switch Used in Nanosecond Pulsed Electric Field Generator
637
Characterization of a linear venetian-blind macroparticle filter for cathodic vacuum arcs
638
Characterization of a Linearly Chirped FBG Under Local Temperature Variations for Spectral Shaping Applications
639
Characterization of a liquid-crystal pulse shaper over 0.36-PHz bandwidth
640
Characterization of a logarithmic spike timing encoding scheme for a 4×4 tin oxide gas sensor array
641
Characterization of a low leakage current and high-speed 7T SRAM circuit with wide voltage margins
642
Characterization of a low power, short range wireless transceiver
643
Characterization of a low temperature atmospheric-pressure argon microwave induced plasma using visual imaging, OES, and CRDS combined
644
Characterization of a Low-Cost Kilohertz-Driven Plasma Pen Operated in Ar Gas
645
Characterization of a Low-Frequency Radio Astronomy Prototype Array in Western Australia
646
Characterization of a low-loss and wide-band (DC to 170 GHz) flip-chip interconnect on an organic substrate
647
Characterization of a low-noise linearized microwave power amplifier module
648
Characterization of a low-power 6.4 Gbps DDR DIMM memory interface system
649
Characterization of a low-pressure VHF-CCP for sterilization pros and cons of a polymer discharge chamber
650
Characterization of a low-shrinkage photopolymer for holographic data storage
651
Characterization of a magnetic field sensor based on torque measuring
652
Characterization of a magnetic field sensor based on torque measuring [for fusion diagnostics application]
653
Characterization of a magnetoplasma integrated channel waveguide using FD-FD method
654
Characterization Of A Matrix 1178 Stripper System For Electrical Device Damage Using Statistical Modeling And SPIDER Wafers
655
Characterization of a Mechanical Motion Amplifier Applied to a MEMS Accelerometer
656
Characterization of a medical interface
657
Characterization of a MEMS accelerometer for an underground mine positioning system
658
Characterization of a MEMS based optical system for free-space board-to-board optical interconnects
659
Characterization of a MEMS biochip for planar patch-clamp recording
660
Characterization of a MEMS-Based Embedded Non Volatile Memory Array for Extreme Environments
661
Characterization of a metafilm/metasurface
662
Characterization of a metastability measurement system
663
Characterization of a micro optical distance sensor
664
Characterization of a micro tunable cat´s eye array in an optical identification system and comparison between different types of ID tags
665
Characterization of a micromachined inchworm motor with thermoelastic linkage actuators
666
Characterization of a micromachined planar patch clamp for cellular electrophysiology
667
Characterization of a microstrip patch antenna including a coplanar feed
668
Characterization Of A Microwave Cavity Plasma Reactor Under Large Area Diamond Film Deposition Conditions
669
Characterization of a Microwave Plasma Etching Reactor
670
Characterization of a microwave probe up to frequencies of 400 GHz
671
Characterization of a microwave silicon single-chip direct conversion RF transceiver
672
Characterization of a millimeterwave integrated BCB patch antenna InP HEMT receiver array
673
Characterization of a minute hard x-ray source driven by a relativistic wavelength-cubed laser
674
Characterization of a Mixed Multiplicity Counter Based on Liquid Organic Scintillators
675
Characterization of a Mo/Au Thermometer for ATHENA
676
Characterization of a model wire-plate pulsed corona plasma reactor
677
Characterization of a mode-locked quantum-dash Fabry-Perot laser based on measurement of the complex optical spectrum
678
Characterization of a modified LISN for effective separated measurements of common mode and differential mode EMI noise
679
Characterization of a Monolithic Concatenated SOA/SA Waveguide Device for Picosecond Pulse Amplification and Shaping
680
Characterization of a monolithic slot antenna using an electro-optic sampling technique
681
Characterization of a multi-electrode bulk-SOA for low NF in-line amplification in passive optical networks
682
Characterization of a multi-element clinical HIFU system using acoustic holography and nonlinear modeling
683
Characterization of a multi-layered MEMS pressure sensor using piezoresistive silicon nanowire within large measurable strain range
684
Characterization of a Multilayered Negative-Refractive-Index Transmission-Line (NRI-TL) Metamaterial
685
Characterization of a Multilevel HV-IGBT Module for Distribution Applications
686
Characterization of a multi-mode microstrip aperture for phased array applications
687
Characterization of a Multiple Bubble Jet With a Streamer Discharge
688
Characterization of a multiplexed Compton scatter tomograph for non-destructive inspection of thin, low-Z samples
689
Characterization of a multipolar electron cyclotron resonance microwave plasma source
690
Characterization of a multi-user indoor positioning system based on low cost depth vision (Kinect) for monitoring human activity in a smart home
691
Characterization of a multiwavelength waveguide grating router laser
692
Characterization of a Nano-Oxide Layer in a Pseudo Spin Valve by Complex Magneto-Impedance Spectroscopy
693
Characterization of a nanoscale S-layer protein based template for biomolecular patterning
694
Characterization of a needle hydrophone array for acoustic feedback during ultrasound hyperthermia treatments
695
Characterization of a needle-type probe GMR sensor for biomedical applications
696
Characterization of a neural network-based trajectory recognition optical sensor for an automated guided vehicle
697
Characterization of a neuromorphic motion detection chip based on insect visual system
698
Characterization of a new 1.2 kV IGBT 3L-NPC phase-leg module for low voltage applications
699
Characterization of a new 4.5 kV press pack SPT+ IGBT in Voltage Source Converters with clamp circuit
700
Characterization of a new 4.5 kV press pack SPT+ IGBT for medium voltage converters
701
Characterization of a new 6.5 kV 1000A SiC diode for medium voltage converters
702
Characterization of a new 90° phase shift for QAM-QPSK photonic vectorial modulators/demodulators
703
Characterization of a New ASIC Readout for Pixel CZT Detectors for Hard X-Ray Astronomy
704
Characterization of a new copper cable for next generation dsl systems
705
Characterization of a new designed octahedron slotted metal track by simulations
706
Characterization of a new device for fluorescent lamps supplying
707
Characterization of a new dielectric barrier discharge plasma using spectral data
708
Characterization of a New Epoxy Resin System for Thermal Management Application
709
Characterization of a new flexible pressure sensor for body sensor networks
710
Characterization of a new interpenetrated network conductive polymer- (IPN-CP) and new designs for a otential linear actuator that works in air
711
Characterization of a new interpenetrated network conductive polymer (IPN-CP) as a potential actuator that works in air conditions
712
Characterization of a new linear switched reluctance actuator
713
Characterization of a new L-shaped MOSFET for future deca nano application
714
Characterization of a New MR Compatible Small Animal PET Scanner Using Monte-Carlo Simulations
715
Characterization of a new multianode PMT for low-level optical fiber readout
716
Characterization of a new multianode PMT for optical fiber readout at low-level light intensity
717
Characterization of a new PLC modem for an industrial application
718
Characterization of a new transformer coupled plasma source by fast-scanning electric probes
719
Characterization of a New Type of Dry Electrodes for Long-Term Recordings of Surface-Electromyogram
720
Characterization of a new, low cost composite substrate material
721
Characterization of a NLOS Off-Body Channel at 2.45 GHz Using Patch Antenna Inside a Mine
722
Characterization of a no-flow underfill encapsulant during the solder reflow process
723
Characterization of a non linear fractional model of electrode-tissue impedance for neuronal stimulation
724
Characterization of a non thermal plasma torch
725
Characterization of a nonohmic RF-insensitive solid-state ignition element
726
Characterization of a Novel 100-Channel Silicon Photomultiplier—Part I: Noise
727
Characterization of a Novel 100-Channel Silicon Photomultiplier—Part II: Charge and Time
728
Characterization of a novel alkali metal and transition metal plasma source
729
Characterization of a Novel and Widely-Tunable Yb:KYF4 Laser for Optical Frequency Metrology
730
Characterization of a Novel Biopolymer by FT-IR Spectroscopy and its Use for Cobalt Removal
731
Characterization of a Novel Data Glove Based on Textile Integrated Sensors
732
Characterization of a Novel Diamond-Based Microdosimeter Prototype for Radioprotection Applications in Space Environments
733
Characterization of a Novel Europium Doped Gallium Oxide Electroluminescent Device
734
Characterization of a novel fine-pitch ball grid array package for flash memory application
735
Characterization of a novel fluxless surface preparation process for die interconnect bonding
736
Characterization of a novel GaAs-based microwave optical switch
737
Characterization of a novel heart and respiratory rate sensor
738
Characterization of a novel high-power fiber-pumped Er-Yb microlaser in single-frequency operation at 1.5 μm
739
Characterization of a novel instrument for vibration exercise
740
Characterization of a Novel Magnetic Tracking System
741
Characterization of a novel micromachined accelerometer with enhanced-MIDOS
742
Characterization of a Novel Nine-Transistor SRAM Cell
743
Characterization of a novel passive RF filter for frequencies of 4-225 MHz
744
CHARACTERIZATION OF A NOVEL SINGLE-GAP TRANSFORMER COUPLED L-C GENERATOR
745
Characterization of a novel three-section tunable slotted Fabry-Perot laser
746
Characterization of a Novel Yb:YLF Laser for Optical Frequency Metrology
747
Characterization of a Nozzle-Integrated Capacitive Sensor for Microfluidic Jet Systems
748
Characterization of a NTD Double-Sided Silicon Strip Detector using a pulsed ion beam
749
Characterization of a n-type Field Effect Transistor made from direct growth and patterning of single wall carbon nanotubes film
750
Characterization of a nuclear medicine gamma camera as a gamma spectrometer for low activity sources
751
Characterization of a part of the rate distortion region for the gaussian distributed source coding
752
Characterization of a passively mode-locked Raman fiber laser
753
Characterization of a perfect absorber
754
Characterization of a persistent lunar surface science network using on-orbit beamed power
755
Characterization of a PET camera optimized for prostate imaging
756
Characterization of a pH sensor based on an AlGiaN/GaN transistor
757
Characterization of a phase modulated coherent optical OFDM system based on Hartley transform
758
Characterization of a photoresist with wavelength selected tone
759
Characterization of a photosensitive dry adhesive film for wafer level MEMS packaging
760
Characterization of a Piezoelectric Transducer Coupled to a Solid
761
Characterization of a Piezoelectric Ultrasonic Linear Motor for Braille Displays
762
Characterization of a piezoworm stage
763
Characterization of a pinhole tomograph with 180° acquisition
764
Characterization of a pinhole tomograph with 180° acquisition using a discrete vertex set reconstruction algorithm
765
Characterization of a pin-TWA photoreceiver in OOK-system experiments up to 112 Gb/s
766
Characterization of a Pixelated CdTe X-Ray Detector Using the Timepix Photon-Counting Readout Chip
767
Characterization of a planar RF induction plasma source for polymer film deposition processes
768
Characterization of a planar spiral inductor on a composite-resin low-impedance substrate and its application to microwave circuits
769
Characterization of a plasma deflagration accelerator as an ELM replicator for PFC testing
770
Characterization of a plasma source excited by an annular waveguide resonator
771
Characterization of a polychromatic x-ray beam from the acceleration of energetic electrons in ultrafast laser-produced plasmas
772
Characterization of a polymer film optical fiber hydrophone for use in the range 1 to 20 MHz: A comparison with PVDF needle and membrane hydrophones
773
Characterization of A Polymer-Based MEMS Packaging Technique
774
Characterization of a prototype pixel array detector (PAD) for use in microsecond framing time-resolved X-ray diffraction studies
775
Characterization of a pseudo-random testing technique for analog and mixed-signal built-in-self-test
776
Characterization of a pseudospark switch triggered by a corona-plasma electrode
777
Characterization of a pulsed supersonic molecular beam using coherent anti-Stokes Raman spectroscopy
778
Characterization Of A Pulsed X-ray Source For Fluorescent Lifetime Measurements
779
Characterization of a pulsed X-ray source for fluorescent lifetime measurements
780
Characterization of a pulsed-DC capillary dielectric barrier discharge as a cold plasma source for atmospheric pressure applications
781
Characterization of a pumping system in Martian-like environment
782
Characterization of a PVD-TiN as the diffusion barrier/adhesion promoter for use in a multilevel copper interconnection technology
783
Characterization of a PWT photoinjector at heavy beam loading
784
Characterization of a quantum cascade laser as local oscillator in a heterodyne receiver at 2.5 THz
785
Characterization of a quantum dot mode locked laser functioning as a photonic microwave source
786
Characterization of a quantum dot nipi photovoltaic device
787
Characterization of a quarts MEMS tilt sensor with 0.001º precision
788
Characterization of a quasi-optical NbN superconducting HEB mixer
789
Characterization of a quasi-optical NbN superconducting HEB mixer at 300 GHz
790
Characterization of a radial laser scanner for mobile robot navigation
791
Characterization of a Radiation-Pressure-Driven Micromechanical Oscillator
792
Characterization of a ramped gradient DTL: experiment and theory
793
Characterization of a reactor module by means of 3–Dimensional finite element - analyses
794
Characterization of a Real Internet Radio Service
795
Characterization of a recoverable flight control computer system
796
Characterization of a Reflectarray Gathered Element With Electronic Control Using Ohmic RF MEMS and Patches Aperture-Coupled to a Delay Line
797
Characterization of a resistive half plane over a resistive sheet
798
Characterization of a resistive half plane over a resistive sheet
799
Characterization of a resistive voltage divider design for wideband power measurements
800
Characterization of a reverberation chamber by 3D finite element method
801
Characterization of a reverberation chamber for automotive susceptibility
802
Characterization of a sampling voltage tracker for measuring fast, repetitive signals
803
Characterization of a satellite-based passive microwave sea ice concentration climate data record
804
Characterization of a Second Generation HTS Coil for Electrical Power Devices
805
Characterization of a self-magnetic-pinched diode
806
Characterization of a self-phase-Modulation-based all-optical regeneration system
807
Characterization of a Serializer ASIC Chip for the Upgrade of the ATLAS Muon Detector
808
Characterization of a SESAM mode-locked erbium fiber laser frequency comb with an integrated electro-optic modulator
809
Characterization of a set of cryocooled sapphire oscillators at the 10−16 level with the three-cornered hat method
810
Characterization of a set of invertible LPTV filters using circulant matrices
811
Characterization of a severely degraded silicone elastomer HV insulator-an aid to development of lifetime assessment techniques
812
Characterization of a shared buffer optoelectronic packet router
813
Characterization of a shielded transition to a dielectric waveguide
814
Characterization of a side-chain liquid crystalline polymer as reversible polarization holographic material
815
Characterization of a SiGe Layer After Isotropic Etching of Surrounding Si
816
Characterization of a Silicon IGBT and Silicon Carbide MOSFET Cross-Switch Hybrid
817
Characterization of a Silicon Strip Detector and a YAG:Ce Calorimeter for a Proton Computed Radiography Apparatus
818
Characterization of a silicon thermal gas-flow sensor with porous silicon thermal isolation
819
Characterization of a silicon-based shear-force sensor on human subjects
820
Characterization of a silicone gel as a coating use for corrosion protection
821
Characterization of a silicon-photonic multi-wavelength power monitor
822
Characterization of a silicon-photonic wideband switch in UCSD´s MORDIA ring network
823
Characterization of a silver-mirror-based eight-pass Ti:sapphire preamplifier
824
Characterization of a simple broadband textile planar inverted-F antenna (PIFA) for on body communications
825
Characterization of a simple communication network using Legendre transform
826
Characterization of a simple thin-film superconducting switch
827
Characterization of a single photon counting imaging system by the transfer functions analysis
828
Characterization of a Single Photon Counting Imaging System by Transfer Function Analysis
829
Characterization of a single port aluminum nitride tuning fork
830
Characterization of a single resonant charge in a silicon nanowire device
831
Characterization of a single-frequency-pumped continuous-wave extracavity diamond Raman laser
832
Characterization of a single-phase induction motor due to the effect of slot opening
833
Characterization of a single-supply subthreshold FPGA
834
Characterization of a sliding linear investigative platform for analyzing lower-limb stability (SLIP-FALLS)
835
Characterization of a slotted circular patch resonator for adjustable dual-mode dual-band bandpass filters
836
Characterization of a Small Animal PET Detector Block Incorporating a Digital Photon Counter Array
837
Characterization of a small peripheral array package
838
Characterization of a small-animal high-purity germanium SPECT system
839
Characterization Of A Space Charge Limited Non Relativistic Electron Beam Diode Operating At 300 KV/cm
840
Characterization of a space-class Fourier transform spectrometer against a detailed performance model
841
Characterization of a speaker from a telephone recording using speech quality measurements
842
Characterization of a spray acid tool for selectively etching under bump metallurgy films used in flip chip applications
843
Characterization of a Street Lighting Power Line when Used as a Communications Channel in the 115 kHz Band
844
Characterization of a stress-applied polarization-maintaining (PM) fiber through photoelastic tomography
845
Characterization of a stretchable multielectrode array for epimysial recording
846
Characterization of a submicron PMOS in mixer circuits
847
Characterization of a Sub-THz Photonic Transmitter Based on a Separated-Transport-Recombination Photodiode
848
Characterization of a Supercluster of SnoRNA Genes from Rice Genome
849
Characterization of a Superconducting NbSi Transition Edge Sensor for TeSIA
850
Characterization of a superconductive sigma-delta analog to digital converter
851
Characterization of a surface wave argon discharge sustained by microwave
852
Characterization of a symbol rate timing recovery technique for a 2B1Q digital receiver
853
Characterization of a synchronous wave nonlinear transmission line
854
Characterization of a system suspended by permanent magnets
855
Characterization of a system to evaluate motor control at the ankle joint
856
Characterization of a tantalum capacitor fabricated with a conducting polypyrrole as a counter electrode
857
Characterization of a target plasma for MTF
858
Characterization of a TEM cell-based setup for the exposure of biological cell suspensions to high-intensity nanosecond pulsed electric fields (nsPEFs)
859
Characterization of a temporal contrast microbolometer infrared sensor
860
Characterization of a thermal interface material for burn-in application
861
Characterization of a thick copper pillar bump process
862
Characterization of a three-dimensional photonic crystal with point defects at near-infrared wavelengths
863
Characterization of a three-dimensional SOI integrated-circuit technology
864
Characterization of a three-phase dual active bridge DC/DC converter in wye-delta connection for a high frequency and high power applications
865
Characterization of a THz SLM and its application for improved high resolution THz imaging
866
Characterization of a time resolved diagnostic for measuring source spot size
867
Characterization of a time-of-flight PET scanner based on lanthanum bromide
868
Characterization of a Timepix detector-based hodoscope for the measurement of mixed radiation fields
869
Characterization of a train compartment scenario for the individual exposure assessment
870
Characterization of a trajectory recognition optical sensor for an automated guided vehicle
871
Characterization of a Transition-Edge Bolometer Made of YBCO Thin Films Prepared by Nonfluorine Metal–Organic Deposition
872
Characterization of a transmission system on RX, TX, Channel and the Clocking system
873
Characterization of a transoceanic aircraft delay tolerant network
874
Characterization of a Transverse Particle Acceleration System
875
Characterization of a Trench-Gated IGBT using the split C-V Method
876
Characterization of a TS-Space quad-source solar simulator
877
Characterization of A Tubular Hot-Cavity Surface Ionization Source
878
Characterization of a Turbo-Switch SOA Wavelength Converter Using Spectrographic Pulse Measurement
879
Characterization of a two-dimensional subsurface object with an effective scattering model
880
Characterization Of A Two-dimensional, Thermoluminescent, Dose-mapping System: Uniformity, Reproducibility, And Calibrations
881
Characterization of a two-section integrated tunnel-junction phototransistor
882
Characterization of a UHF RFID chip
883
Characterization of a variable bit-rate receiver for applications in WDM/WDMA systems
884
Characterization of a vector Doppler system based on an array transducer
885
Characterization of a very low-cost silicon cathode-zinc electrolyte solar cell
886
Characterization of a very shallow water acoustic communication channel
887
Characterization of a Voltage Glitch Attack Detector for Secure Devices
888
Characterization of a volumetric metamaterial realization of an artificial magnetic conductor for antenna applications
889
Characterization of a volumetric negative-refractive-index transmission-line (NRI-TL) metamaterial for incident waves from free-space
890
Characterization of a water radiofrequency plasma - An experimental investigation
891
Characterization Of A Waveguide Diplexer For Use As A Fast Switch For High Power Microwaves
892
Characterization of a whole body imaging technique for PET
893
Characterization of a wideband adaptive-MIMO antenna
894
Characterization of a Wideband Digitizer for Power Measurements up to 1 MHz
895
Characterization of a wideband digitizer for power measurements up to 1 MHz
896
Characterization of a wind flutter generator
897
Characterization of a wire bonding process with the added challenges from palladium-coated copper wires
898
Characterization of a wireless implantable infusion micropump for small animal research under simulated in vivo conditions
899
Characterization of a Wireless MESH Network for Voice, Data and Video
900
Characterization of a Wireless Potentiostat for Integration With a Novel Implantable Biotransducer
901
Characterization of a Xenon plasma electron flood gun on a GSD-200E 2 high current implanter using QBD, FLASH, SPIDER, and CHARMTM-2 wafers
902
Characterization of a X-ray pixellated CdTe detector with TIMEPIX photon-counting readout chip
903
Characterization of a YAG:Ce calorimeter with high-energy proton beam
904
Characterization of AA size lithium rechargeable cells
905
Characterization of abrupt/gradual video shot transitions as unsmoothed/smoothed singularity
906
Characterization of absorber materials for high-power millimetre waves
907
Characterization of absorption loss for UWB body tissue propagation model
908
Characterization of absorption spectrum of ethanol gas for use as terahertz alcohol sensor
909
Characterization of AC Hot-Carrier Effects in Poly-Si Thin-Film Transistors
910
Characterization of Accelerometers Using Nonlinear Kalman Filters and Position Feedback
911
Characterization of access broadband over power line (BPL) systems by measurements
912
Characterization of accessibility for a class of nonlinear time-delay systems
913
Characterization of accessibility for affine connection control systems at some points with nonzero velocity
914
Characterization of accumulation layer capacitance for extracting data on high-κ gate dielectrics
915
Characterization of AC-DC transfer shunts up to 100 A at 100 kHz using two-stage, amplifier-aided current transformers
916
Characterization of acoustic channel for underwater wireless sensor networks
917
Characterization of acoustic droplet vaporization and inertial cavitation thresholds in acoustically-responsive tissue scaffolds
918
Characterization of acoustic interactions with a scale model of an elastic ocean bottom using deterministic and stochastic representations of the rough surface
919
Characterization of Acoustic Resonance in a High-Pressure Sodium Lamp
920
Characterization of acoustic resonances in HID lamps based on relative impedance difference with an automated measuring station
921
Characterization of acoustic signal produced by partial discharge in insulation oil
922
Characterization of acoustic signals through continuous linear time-frequency representations
923
Characterization of acoustic vibration modes at GHz frequencies in bulk acoustic wave resonators by combination of scanning laser interferometry and scanning acoustic force microscopy
924
Characterization of acoustomigration with on-wafer measurement system
925
Characterization of acrylate-based ChemFET sensor for nitrate sensing and monitoring
926
Characterization of active and passive millimeter-wave monolithic elements by on-wafer probing
927
Characterization of active channel processing by PIMR
928
Characterization of active hair-bundle motion: a source for auditory-organ amplificatory phenomena?
929
Characterization of active harmonic phase standard with improved characteristics for nonlinear vector network analyzer calibration
930
Characterization of active pixel sensors in 0.25 μm CMOS technology
931
Characterization of activity epochs in actimetric registries for infantile colic diagnosis: Identification and feature extraction based on wavelets and symbolic dynamics
932
Characterization of acuity laser range finder
933
Characterization of adaptive modulators in fixed wireless ATM networks
934
Characterization of ADC boards for application in ac electrical metrology setups
935
Characterization of ADCs using a non-iterative procedure
936
Characterization of ADCs using an FM signal
937
Characterization of Adhesion Force in MEMS at High Temperature Using Thermally Actuated Microstructures
938
Characterization of adhesive materials for high circuit density applications
939
Characterization of adhesively bonded laminates using non-linear acoustics
940
Characterization of adhesives and interface strength for automotive applications
941
Characterization of adhesives for microelectronic industry in DMA and relaxation experiments for interfacial fracture toughness characterization — Difficulties and solution
942
Characterization of Adjacent Track Erasure in Perpendicular Recording by a Stationary Footprint Technique
943
Characterization of adsorbent materials from paper waste generated in paper making process
944
Characterization of adsorption-desorption processes on semiconductor surfaces using nanocantilever mass sensors
945
Characterization of advanced drive system for hybrid electric vehicles
946
Characterization of advanced excimer laser crystallized polysilicon thin film transistors
947
Characterization of advanced materials for high voltage/high temperature power electronics packaging
948
Characterization of AE transducers using Davies´ bar technique
949
Characterization of Aeronautical Earth Station Antennas for Communication using INMARSAT Satellites
950
Characterization of aerosol physical and optical properties from a combination of ground-based and hand-held Sun-photometer data of Singapore
951
Characterization of aerosols based on the simultaneous measurements
952
Characterization of affected areas of the 2008 Iwate-Miyagi, Japan, earthquake using SAR intensity images
953
Characterization of AFM for elasticity analysis of biological samples: Application to diagnosis
954
Characterization of after-reflow misalignment on Head-in-Pillow defect in BGA assembly
955
Characterization of ag nanofilm metallization on copper chip interconnect and its ultrasonic bondability
956
Characterization of Ag Wire Brush/Cu Slip Ring Electrical Contacts Rotating in Wet CO2
957
Characterization of Ag(In, Ga)Se2/CdS interface in AIGS solar cell by HAADF-STEM measurement
958
Characterization of Ageing for MV Power Cables Using Low Frequency Tan δ Diagnostic Measurements
959
Characterization of aggregate interference in arbitrarily-shaped underlay cognitive networks
960
Characterization of Aging and Degradation of 28kV Polymeric insulators using Electrical Impedance Spectroscopy
961
Characterization of aging effects in lead free solder joints using nanoindentation
962
Characterization of aging in polymeric insulation by thermally stimulated depolarization current measurements
963
Characterization of aging process in power converters using spread spectrum time domain reflectometry
964
Characterization of AiGaP/GaP Heterostructures Grown by MOVPE
965
Characterization of air-bridges in MM-wave coplanar waveguide using the complete mode spectrum of CPW
966
Characterization of air-coupled transducers
967
Characterization of aircraft electro hydrostatic actuator using virtual instrumentation
968
Characterization of aircraft joints using ultrasonic guided waves and physically based feature extraction
969
Characterization of airflow impedance in two types of telecommunications chassis
970
Characterization Of Air-ice-ocean Interactive Processes In The Miz Based On Sar Derived Ice Edge Configurations.
971
Characterization of Air-nitrogen-argon DC glow discharge plasma with THz time domain spectroscopy
972
Characterization of Al wire wedge bonding in power electronics package
973
Characterization of Al/Cu/W bond pad micro-corrosion
974
Characterization of Al/SiO2/arbitrarily-doped pp+-Si solar cell
975
Characterization of Al2O3 films grown by electron beam evaporator on Si substrates
976
Characterization of Al2O3-HfO2-Al2O3 sandwiched MIM capacitor under DC and AC stresses
977
Characterization of Al0.3Ga0.7As/GaAs quantum-well delta-doped channel FET grown by molecular-beam epitaxy
978
Characterization of AlGaAs microstructure fabricated by AlGaAs/GaAs micromachining
979
Characterization of AlGaAs waveguides for three-wave mixing
980
Characterization of AlGaN and GaN Based HEMT with AlN Interfacial Spacer
981
Characterization of AlGaN/GaN Metal- Semiconductor-Metal Photodetectors With a Low-Temperature AlGaN Interlayer
982
Characterization of AlGaN/GaN-on-Si HFETs in high-power converter applications
983
Characterization of Alien-NEXT in 10GBASE-T systems
984
Characterization of Aligned Wafer-Level Transfer of Thin and Flexible Parylene Membranes
985
Characterization of Alkali Impurities in Quartz
986
Characterization of all ρ-approximated sequences for some scheduling problems
987
Characterization of all nonlinear stabilizing controllers via observer based kernel representations
988
Characterization of all robust PD-based PSSs: An interval arithmetic approach
989
Characterization of all static state feedback mixed LQR/H∞ controllers for linear continuous-time systems
990
Characterization of all the elastic, dielectric, and piezoelectric constants of uniaxially oriented poled PVDF films
991
Characterization of all zinc chloride zinc carbon cells containing zinc cans made from no lead added zinc alloys
992
Characterization of all-metallic field emitter arrays in combined diode-RF cavity electron gun
993
Characterization of All-Optical Clock Recovery for 40 Gb/s RZ-OOK and RZ-DPSK Data Using Mode-Locked Semiconductor Lasers
994
Characterization of All-Optical Regeneration Potentials of a Bistable Semiconductor Ring Laser
995
Characterization of allowable perturbations of a closed-loop system with pole-placement controller
996
Characterization of alloyed AuGe/Ni/Au ohmic contacts to n-doped GaAs by measurement of transfer length and under the contact sheet resistance
997
Characterization of Aloha in underwater wireless networks
998
Characterization of Alpha AXP performance using TP and SPEC workloads
999
Characterization of Al-Schottky CdTe detectors
1000
Characterization of alternate power distribution methods for 3D integration